Ericsson LG WIT400H Wireless IP Terminal User Manual WIT 400H
Ericsson-LG Co., Ltd. Wireless IP Terminal WIT 400H
UserManual.wiki
>
Ericsson LG
>
WIT400H User Manual
User manual
Navigation menu
Upload a User Manual
Namespaces
Wiki Guide
HTML
PDF
Info
Views
User Manual
Discussion / Help
Navigation
![WIT-400H User Manual Issue: 0.1A Date: 28/July/2009This Document Contains proprietary information and may not be reproduced or copied without express Written permission of a duly authorized representative of LG-Nortel Co.Ltd 45.0.3GREBOOTING WIT-400H .......................................................................................................20G5.1GBASIC FEATURE ............................................................................................................................20G5.1.1GTURING THE POWER ON AND OFF .......................................................................................20G5.1.2GMAKING OUTGOING CALL...................................................................................................21G5.1.3GTAKING AN INCOMING CALL ...............................................................................................22G5.1.4GUSING MANNER AND LOCK MODE QUICKLY.......................................................................22G5.1.5GMUTE. ..................................................................................................................................23G5.1.6GREDIALING CALLS. ..............................................................................................................23G5.1.7GADJUSTING THE VOLUME. ...................................................................................................23G5.1.8GSIGNAL STRENGTH...............................................................................................................24G5.1.9GSPEED DIALING....................................................................................................................24G5.1.10GCALLER ID. ........................................................................................................................24G5.1.11GAP PROBING.......................................................................................................................24G5.2GKEY PHONE FEATURE...................................................................................................................24G5.2.1GTRANSFERRING THE CALL ...................................................................................................24G5.2.2GHOLDING THE CALL.............................................................................................................25G5.2.3GCALL FORWARD...................................................................................................................26G5.2.4GCALL WAITING ....................................................................................................................27G5.2.5GCALL PARK ..........................................................................................................................27G5.2.6GCALL PICK-UP......................................................................................................................28G5.2.7GMESSAGE WAIT /CALL BACK .............................................................................................29G5.2.8GDONOT DISTURB (DND).....................................................................................................29G5.2.9GSYSTEM SPEED DIAL............................................................................................................30G5.2.10GPTT GROUPS ......................................................................................................................30G6.GMENU FEATURES..................................................................................... 32G6.1GMENU DISPLAY AND MENU TREE.................................................................................................32G6.1.1GMAIN MENU DISPLAY..........................................................................................................32G6.1.2GMAIN MENU TREE ...............................................................................................................35G6.2GPHONE BOOK [MENU +1]............................................................................................................35G6.2.1GADD NEW [MENU+1+1].......................................................................................................35G6.2.2GSEARCH [MENU+1+2]..........................................................................................................35G6.2.3GCALLER GROUPS [MENU+1+3]............................................................................................36G6.2.4GSPEED DIALS [MENU+1+4]..................................................................................................36G6.2.5GDELETE ALL [MENU + 1 + 5] ...............................................................................................37G6.3GSOUND SETTING [MENU +2]........................................................................................................37G6.4GDISPLAY SETTING [MENU +3].....................................................................................................38G6.5GCALL HISTORY [MENU +4]..........................................................................................................39G6.5.1GCALL HISTORY.....................................................................................................................39G6.5.2GCALL DURATION..................................................................................................................40G6.5.3GCALL SETTING .....................................................................................................................41G6.6GMESSAGES [MENU +5]................................................................................................................42G6.6.1GWRITE MESSAGE..................................................................................................................42G6.6.2GINBOX...................................................................................................................................42G6.6.3GOUTBOX ...............................................................................................................................42G6.6.4GDRAFT ..................................................................................................................................42G6.7GTOOLS [MENU +6]........................................................................................................................44G6.7.1GSCHEDULE............................................................................................................................44G6.7.2GMEMO ..................................................................................................................................47G6.7.3GALARM CLOCK.....................................................................................................................48G6.7.4GCALCULATOR.......................................................................................................................48G6.7.5GWORLD TIME .......................................................................................................................49G6.7.6GD-DAY ..................................................................................................................................49G](https://usermanual.wiki/Ericsson-LG/WIT400H/User-Guide-1205877-Page-5.png)
![WIT-400H User Manual Issue: 0.1A Date: 28/July/2009This Document Contains proprietary information and may not be reproduced or copied without express Written permission of a duly authorized representative of LG-Nortel Co.Ltd 56.8GSETTINGS [MENU +8]...................................................................................................................50G6.8.1GPROFILE SETTING.................................................................................................................50G6.8.2GSIP SETTING.........................................................................................................................51G6.8.3GPROVISIONING SETTING.......................................................................................................52G6.8.4GWIRELESS LAN SETTING.....................................................................................................52G6.8.5GSECURITY.............................................................................................................................52G6.8.6GWIRELESS LAN STATUS ......................................................................................................53G6.8.7GNETWORK INFORMATION.....................................................................................................53G6.8.8GS/W VERSION.......................................................................................................................53G6.8.9GRESET SETTINGS. .................................................................................................................53G](https://usermanual.wiki/Ericsson-LG/WIT400H/User-Guide-1205877-Page-6.png)
![WIT-400H User Manual Issue: 0.1A Date: 28/July/2009This Document Contains proprietary information and may not be reproduced or copied without express Written permission of a duly authorized representative of LG-Nortel Co.Ltd 13802.11b/g Wireless Network Setup SSID / AP Probe IPECS SIP setup MFIM IP address Conference call 3 way MSG Callback 3.3 Regulatory Specifications of WIT-400H mjjGwGX\UY[^GVGpjGyzzYXWGmjjGwG]_GohjV}jG GmjjGwGYGzhyGluZWWZY_GluZWXG[_`TXVTX^Glu]W`\WTXGlu\WZ]WVZ]XGMIC Approval [Note]{GGG G O~p{T[WWoPG˅ GG G GsG GG GGGGGUGGGG](https://usermanual.wiki/Ericsson-LG/WIT400H/User-Guide-1205877-Page-14.png)
![WIT-400H User Manual Issue: 0.1A Date: 28/July/2009This Document Contains proprietary information and may not be reproduced or copied without express Written permission of a duly authorized representative of LG-Nortel Co.Ltd 164.1.3 Ringing / Call State Display The display is like as follows (A) Being called (B) Calling (C) Missing a call When a call is being tried, LCD display will be changed to (A). When you trying to a call, LCD display will be changed to (B). If you missed a call by your absent, the LCD display will be changed to (C) and If the caller’s name and number are already stored in your phone book, the corresponding name appears with the number at absent display. 4.2 Buttons and Functions 4.1.1 Buttons and Functions The WIT-400H has 10 digit buttons and 17 feature buttons. 1) Digit Buttons 0, 1, 2, 3, 4, 5, 6, 7, 8, 9 2) Feature Buttons *, #, [SEND], [END], [UP], [DOWN],[LEFT],[RIGHT],[OK],[LSK],[RSK], [Hold/Save], [Clear/Prev], [Trans/PGM],[VOL UP], [VOL DOWN], [PTT] Note: [LSK] means Left Soft Key and [RSK] means Right Soft Key. The function of button is as followings; Button Icon Function Description [SEND] Idle mode [SEND] shows Recent Calls. Predial or after selecting call list or phonebook](https://usermanual.wiki/Ericsson-LG/WIT400H/User-Guide-1205877-Page-17.png)
![WIT-400H User Manual Issue: 0.1A Date: 28/July/2009This Document Contains proprietary information and may not be reproduced or copied without express Written permission of a duly authorized representative of LG-Nortel Co.Ltd 17[SEND] makes a call. [END] During a call [END] release a call. In Menu mode [END] goes to idle mode. Navigation Keys [LEFT], [RIGHT], [UP], [DOWN], [OK] In Menu mode Navigation keys navigate menu. [OK] select current menu or confirm the action. In Idle mode [LEFT] goes to KTU menu. [RIGHT] goes to FLEX menu [UP] goes to Schedule menu [DOWN] goes to message menu. [LSK] LSK means Left Soft Key In Idle mode [LSK] is used as menu key and goes to main menu mode.. In Menu mode or others [LSK] is used to option or special menu keys. [RSK] RSK means Right Soft Key In Idle mode [RSK] is used as search key and goes to search menu in phonebook. In Menu mode or others [RSK] is used to delete or special menu keys [TRANSFER]/ [PGM] Transfer a call to the other station It is used to Program keys [HOLD]/[SAVE] It is used to Hold and Save key [CLEAR]/[PREV] In Menu mode It goes to Previous menu mode In Edit mode It delete previous input character. * In idle mode Pressing longer than 1 second: goes to manner mode Pressing less than 1 second : display * Others mode Display * # In idle mode Pressing longer than 1 second: goes to phone lock mode Pressing less than 1 second : display # Others mode Display #](https://usermanual.wiki/Ericsson-LG/WIT400H/User-Guide-1205877-Page-18.png)
![WIT-400H User Manual Issue: 0.1A Date: 28/July/2009This Document Contains proprietary information and may not be reproduced or copied without express Written permission of a duly authorized representative of LG-Nortel Co.Ltd 18 [VOL UP], [VOL DOWN] In idle mode It is volume up and down of the key tone. In voice mode It is volume up and down of the voice. In ringing mode It is volume up and down of the ring. PTT In idle mode Press this button and hold, PTT works. Other parties of your PTT group can listen your speech.. If you release this button, PTT will be finished and you can listen. In voice mode This button doesn’t work. 0-9 Dial keys Standards dial buttons Memo) Manner mode is different with vibration mode. Manner mode affects all of rings and tones, but vibration mode affects only rings. 4.1.2 Ring and Message LED The ring and message LED located at upper right side is turned on when an incoming call / a new message is received. When the ring OFF function is enabled, ring tone is not heard but ring LED is flashing. The ring LED solid on for a Message waiting indication. 4.3 Entering Text You can enter alphanumeric characters using the keypad. For example, setting a name in the Phone Book, writing a message, scheduling events in the schedule all require entering text. Following text input methods are available in the handset. 4.3.1 Changing the Text Input Mode 1. When you are in a field that allows characters to be entered, you will notice the text input mode indicator in the upper right corner of the display. 2. By pressing shortly, you can toggle and change the input mode among [Abc], [ABC], [T9abc], [T9Abc], [T9ABC], [123],[abc]4.3.2 Using the T9 Mode The T9 predictive text input mode allows you to enter words easily with a minimum number of key presses. As you press each key, the handset begins to display the characters that it thinks you are typing based on a built-in dictionary. As new letters are added, the word changes to reflect the most likely candidate from the dictionary. 1. When you are in the T9 predictive text input mode, start entering a word by pressing keys ‘2’ to ‘9’. Press one key per letter.](https://usermanual.wiki/Ericsson-LG/WIT400H/User-Guide-1205877-Page-19.png)
![WIT-400H User Manual Issue: 0.1A Date: 28/July/2009This Document Contains proprietary information and may not be reproduced or copied without express Written permission of a duly authorized representative of LG-Nortel Co.Ltd 19zThe word changes as letters are typed – ignore what’s on the screen until the word is typed completely. zIf the word is still incorrect after typing completely, press the ‘*’ key once or more to cycle through the other word options. Example Press ‘4’, ‘6’. ‘6’. 3’ to type Good Press the ‘*’ key to get Home zIf the desired word is missing from the word choices list, add it by using the ABC mode. 2. Enter the whole word before editing or deleting any keystrokes. 3. Complete each word with a space by pressing the ‘0’ key. To delete letters, press the [Clear/Prev] key. Press and hold down the [Clear/Prev] key to erase entire words. 4.3.3 Using the ABC mode Use the ‘2’ to ‘9’ keys to enter your text. 1. Press the key labeled with the required letter. zOnce for the first letter. zTwice for the second letter zAnd son on 2. To insert a space, press the ‘0’ key once. To delete letters, press the [Clear/Prev] key. Press and hold down the [Clear/Prev] key to erase entire word 4.3.4 Using the 123 (Number) mode The 123 Mode enables you to enter numbers in a text messages (a telephone number, for example). Press the keys corresponding to the required digits before manually switching back to the appropriate text entry mode. 5. Telephone Features 5.0 Registration The WIT-400H is recognized as one of the LIP phones by IPECS system. Likewise, the WIT-400H system is to be registered for successful call processing by IPECS system. The registration is accomplished in two phases; wireless LAN connection establishment, MFIM registration. 5.0.1 Wireless LAN connection](https://usermanual.wiki/Ericsson-LG/WIT400H/User-Guide-1205877-Page-20.png)
![WIT-400H User Manual Issue: 0.1A Date: 28/July/2009This Document Contains proprietary information and may not be reproduced or copied without express Written permission of a duly authorized representative of LG-Nortel Co.Ltd 20SSIDSSID is used as an ID meaning by “I am a member of family” in 802.11b compliant wireless network. The WIT-400H should have the same SSID to one configured within an AP(Access Point). For setup SSID, please refer to subsection 6.5.4. About SSID in your office, you should contact network administrator. 5.0.2 MFIM setup MFIM IP address WIT-400H should know the IP address of MFIM to initially request registration. For setup of MFIM IP address please refer to subsection 6.5.5. Network mask Since MFIM of IPECS resides in wired network, network mask should be specified as well. For setup of MFIM network mask, please refer to subsection 6.5.5. 5.0.3 Rebooting WIT-400H After the proper setup of both wireless LAN and MFIM IP address, just turn off the phone and turn it on. The WIT-400H will start registration and show its station number which is given by MFIM. 5.1 Basic Feature User can use various telephone features with a WIT-400H registered to MFIM module in an iPECS system. 5.1.1 Turing the Power On and Off Turning the Phone On When pressing [END] ( ) button, the power is turned on and the WIT-400H goes to an idle state. The following describes the sequence of power-on: 1. Install a charged battery pack 2. Press for a few seconds until the blue light in the right upper of the phone is on and off. 3. WIT-400H shows power-on animation 3. WIT-400H tries to do locking the access point while blinking Antenna Icon and RSSI level. 4. If Antenna Icon and RSSI level stop blinking, it means all procedures for initial setup are completed. 5. WIT-400H searches MFIM and sends a registration message to MFIM.](https://usermanual.wiki/Ericsson-LG/WIT400H/User-Guide-1205877-Page-21.png)
![WIT-400H User Manual Issue: 0.1A Date: 28/July/2009This Document Contains proprietary information and may not be reproduced or copied without express Written permission of a duly authorized representative of LG-Nortel Co.Ltd 216. if the WIT-400H receives REGISTER RESPONSE, store station number and display station number : Refer to Idle state LCD display. Turning the Phone Off To turn off the WIT-400H, press [END] ( ) until the display turns off. 5.1.2 Making Outgoing Call Description A user can make a call to a certain user in his systems or external party by dialing. button is used to make a call. Currently, WIT-400H tries to make a call in only a case that you press button. If you just complete entering a number to dial up without pressing button,WIT-400H will not try to make an outgoing call. Operation ཛGEnter phone number to connect a call ཛྷGPress Send key ( )ཝGPhone Icon ( ) is show on the LCD during trying to connect. ཞGThe connection tone is heard when connection is completed. Note : Even though an Ear-Mic is attached to a WIT-400H, a user can hear key tone sound through the Speaker not Ear-Mic. Condition1. If user dials a wrong digit, a user can erase last 1 digit by pressing [Clear/Prev] button once and if you want to erase all digits, press [Clear/Prev] button for longer than 1 second. 2. Every time pressing each button, it is displayed of the LCD. 3. If pressing side button [ UP ( )], [ DOWN ( ) ] during conversation, the receiving voice level is controlled. 4. When conversation is over, press [End] ( ) button. Then the phone ( ) icon is will be disappeared and then the call will be cut off. 5. Call duration time(HH:MM) is displayed on the LCD. zlukG](https://usermanual.wiki/Ericsson-LG/WIT400H/User-Guide-1205877-Page-22.png)
![WIT-400H User Manual Issue: 0.1A Date: 28/July/2009This Document Contains proprietary information and may not be reproduced or copied without express Written permission of a duly authorized representative of LG-Nortel Co.Ltd 22(HH = 00~23, MM=00~59). 5.1.3 Taking an Incoming Call Description When the phone rings or vibrates, press Send key ( ).Operation Incoming Ring Press [ Send ]() Connection. z Incoming CO ring is heard and a message come from iPECS is displayed on the LCD. Notes : If an Ear-Mic is attached to a WIT-400H, it can receive an incoming call by pressing button on the Ear-Mic while a ring sounds. (LG-Nortel Ear-Mic only) Notes : Even though an Ear-Mic is attached to a WIT-400H, a user can hear incoming call ring tone sound through the Speaker not Ear-Mic. Condition 1. When audible signals are heard, the call information will be displayed. 2. Caller Groups can be distinguished with difference ring type. 3. If pressing side button [ UP ( ) ], [ DOWN ( ) ] during conversation, the receiving voice level is controlled. 4. When conversation is over, press [End] ( ) button to release the call. Then the phone ( ) icon is will be disappeared and then the call will be released. 5.1.4 Using Manner and Lock Mode quickly. Manner Mode (Quick) Use the Manner Mode in public places. 1. When in the idle mode, activate the Manner Mode quickly by pressing for 3 seconds. When the Manner Mode is set, the key tones are silent, and the phone is set to vibrate. NOTE: The phone remains in Manner Mode even if you turn it off and back on. zlukG](https://usermanual.wiki/Ericsson-LG/WIT400H/User-Guide-1205877-Page-23.png)
![WIT-400H User Manual Issue: 0.1A Date: 28/July/2009This Document Contains proprietary information and may not be reproduced or copied without express Written permission of a duly authorized representative of LG-Nortel Co.Ltd 23NOTE: To cancel Manner Mode, press to switch into Silence All or Normal Mode. Lock Mode (Quick) Use the Lock Mode to prevent others from using your phone. 1. In Idle mode, to activate the lock mode quickly, press for 3 seconds. Lock mode setting isdisplayed. NOTE: To cancel the Lock Mode, Press [OK] , Unlock, then enter your 4 digit password. 5.1.5 Mute. The mute function prevents the other party from hearing your voice, but allows you to hear the other party. 1. Press Left Soft Key, Mute, during a call. 2. To cancel Mute, press Left Soft Key, Mute again. G5.1.6 Redialing Calls. Press to redial the last number in your call history. Latest 100 phone numbers are stored in the call history list and you can also select one of these to redial. 5.1.7 Adjusting the Volume. vrGvrG](https://usermanual.wiki/Ericsson-LG/WIT400H/User-Guide-1205877-Page-24.png)
![WIT-400H User Manual Issue: 0.1A Date: 28/July/2009This Document Contains proprietary information and may not be reproduced or copied without express Written permission of a duly authorized representative of LG-Nortel Co.Ltd 24Use the side keys to adjust the earpiece, ringer, and key beep volumes. The upper key is used to increase the volume and the lower key is used to decrease the volume. You may adjust the earpiece volume during a call. The ringer volume can be adjusted through the menu. The key beep volume is adjusted through the menu. 5.1.8 Signal Strength. Call quality depends on the signal strength in your area. The signal strength is indicated on the screen as the number of bars next to the signal strength icon: The more bars, the better the signal strength. 5.1.9 Speed Dialing. Speed dialing can be used speed dialing number saved in the phone by pressing digits for 3 seconds 5.1.10 Caller ID. Caller ID lets you know who is calling by displaying the number of the person calling when your phone rings. 5.1.11 AP Probing. WIT-400H has an ability to detect all reachable APs. It shows the list of SSIDs configured in the APs. User can choose one of them under his preference. On the AP probing, please refer to section, 6.5.4. 5.2 Key Phone Feature 5.2.1 Transferring the Call Description This function is to transfer the current call to another user. Operation 1. Transfer a current call with dialing the number of CO or ICM. 9 During a talking Æ Press Left Soft Key and 5.Transfer menu or [LEFT] in navigation key + ‘0’ ÆDial the number to transfer Æ(Inform the called station) Æ Press [ End ] ( ) to release a call.](https://usermanual.wiki/Ericsson-LG/WIT400H/User-Guide-1205877-Page-25.png)
![WIT-400H User Manual Issue: 0.1A Date: 28/July/2009This Document Contains proprietary information and may not be reproduced or copied without express Written permission of a duly authorized representative of LG-Nortel Co.Ltd 25NOTE : A user can make either a .screened or unscreened transfer. ( Screened Transfer When the called station answers, inform the transfer. zPress [ End ] ( )to complete the transfer. ( Unscreened Transfer When the called station begins to ring, zPress [ End ] ( )to complete the transfer after ring back tone is heard. Then, a message is displayed on the LCD of the called station. If the call is not answered within 30 seconds, recall ring is ringing at both stations. At this time, press Send button then a user will be connected with the transferred call again. Condition1. The Primary Call must be answered before transfer can be initiated. 5.2.2 Holding the Call DescriptionA user can hold the current call and connect another call or receive a call by another user with being hold the present call. Operation To hold a callOn the call Æ Press Left Soft Key + 4.Hold menu or [LEFT] in navigation key + ‘*’ 1. Press [Hold] to hold a present call. The hold music is heard to the held user. vrG lukvrG](https://usermanual.wiki/Ericsson-LG/WIT400H/User-Guide-1205877-Page-26.png)
![WIT-400H User Manual Issue: 0.1A Date: 28/July/2009This Document Contains proprietary information and may not be reproduced or copied without express Written permission of a duly authorized representative of LG-Nortel Co.Ltd 26 To retrieve the call during a holding Press Left Soft Key + 4.Hold menu or Press [LEFT] in navigation key + select Hold + [ OK ] To hold a call and make a new call After holding a call, Enter phone number and Press [ Send ]() key.Condition1. The Call must be answered before Hold can be initiated. 2. The WIT-400H will receive hold recalling after hold recall timer. At this time, WIP-Phone can answer the ring by pressing Send button. 3. Only 1 call at a time may be placed on hold 4. IPECS will provide hold music to the held user during holding 5. When there are several held lines , the user can select the held line with pressing number ( [1] or [2] or [3] ) or navigation UP/DOWN and [OK] . 5.2.3 Call Forward Description This feature provides a user the ability to forward calls under the certain condition. A user may forward a call to a certain station, station group, MFIM or an external party. The following call forward types are supported. - Unconditional, Busy, No-answer, Busy/No answer, Off-net, No answer Off-net Operation In Idle State + Press [Menu] + select {1. Call Forward} + [ OK ] + Enter Forward Type + Enter Station Number + Enter Wait time + Press [OK].Condition1. When Call Forward is active, a station can make outgoing calls (internal or external) but cannot activate a Call back or Queue request. vrG](https://usermanual.wiki/Ericsson-LG/WIT400H/User-Guide-1205877-Page-27.png)
![WIT-400H User Manual Issue: 0.1A Date: 28/July/2009This Document Contains proprietary information and may not be reproduced or copied without express Written permission of a duly authorized representative of LG-Nortel Co.Ltd 272. Attempting activation of Call Forward will automatically deactivate any activate Custom Display Message. Active Call Back or Queue requests are not canceled. 5.2.4 Call Waiting Description Call Waiting is used to notify a busy station that an Intercom call is ‘waiting’. The busy station is notified of the call waiting by “Camp-on” tone. After receiving a busy signal, the calling station Camps-on to the called station. The called station, can respond by: 1. Answering the waiting call, placing the active call on Hold first. 2. Sending a Silent Message, 3. Activating One-Time DND, or 4. Ignoring the Camp-On tone. Operation During Called party is busy ÆྙGIf a user dials a busy station, CALL WAIT alerts call waiting to a busy station. ྚGAfter receiving intercom busy tone, press * or the last digit of the called station number. ྛGWhen a busy terminal engaged an ICM or CO call is called through camp-on by a new caller. ྜGThe called station will hear camp-on tone. Then the called party can answers to a new call by pressing [ Send ]().ྜྷGPress [ Send ]()to connect to the other calling station. The former calling party is on hold. ྞGMESSAGE come from IPECS is displayed on the LCD. ྟGPress [ Send ]()to back to the former calling party . NOTE : Pressing End button to release the active call (CO call or intercom call) 5.2.5 Call Park Description A user can park using CO line to CO line parking location. Operation Call Park While connected to an outside call; *](https://usermanual.wiki/Ericsson-LG/WIT400H/User-Guide-1205877-Page-28.png)
![WIT-400H User Manual Issue: 0.1A Date: 28/July/2009This Document Contains proprietary information and may not be reproduced or copied without express Written permission of a duly authorized representative of LG-Nortel Co.Ltd 28Press [SYSTEM] + select {Flash} + [ OK ] + Dial a parking location.ྙGThe CO line being used is on hold and the WIP-Phone goes to an idle state. Retrieving a parked call Dial a parking location + Press [ Send ]() Parking Location Number SYSTEM PARKING LOCATION NUMBER IPECS 601 – 610 for MFIM, 601-619 for MFIME Notes : A Parking Location Area will be changed by LG-Nortel Condition1. Call Park is only applied to a user that is in talk status. 2. Call Park is only applied to a parking location area. 3. A parked number will be displayed on the LCD after timer LDK sends release command. (Display the LCD message come from IPECS) 4. WIP-Phone goes Idle state after receiving the RTI command. 5. Parked call will recall after time out. 5.2.6 Call Pick-Up DescriptionThis function is to pick up a call instead of another user who is called. It can be used after programming at the IPECS attendant station. Operation Group Call Pick-up A station can answer (“Pick-up”) incoming and transferred Intercom, CO and IP calls ringing at another station in the same Station Pick-up Group. All ringing calls except for Private Lines and queue callbacks are subject to Pick-up by other group member stations. In addition stations in other types of Station Groups, if allowed, may use Group Call Pick-up. 1. Dial the Group Call Pick-up access code 566. 2. Press [ Send ]( )](https://usermanual.wiki/Ericsson-LG/WIT400H/User-Guide-1205877-Page-29.png)
Condition5.2.7 Message Wait / Call Back Description User can activate a Message Wait Indication requesting a Call Back when calling a station that does not answer or is in DND. A station may receive a Message Wait from other stations in the system. The station receiving the Message Wait can return the call using [MSG/CALLBK] button or select Missed call in Recent Call and pressing [ Send ]( )When a busy station is called, the user may request to be placed in a queue to receive a Call Back. When the called station returns to idle, the system signals the initiating station with Callback ring. When the user answers, the now idle station is called. Operation After receiving ringing back tone Æ Press [SYSTEM] (left key in navigation) + select MSG/CALLBK} Æ[OK] ÆWIT-400H goes Idle. Condition5.2.8 Do Not Disturb (DND)](https://usermanual.wiki/Ericsson-LG/WIT400H/User-Guide-1205877-Page-30.png)
![WIT-400H User Manual Issue: 0.1A Date: 28/July/2009This Document Contains proprietary information and may not be reproduced or copied without express Written permission of a duly authorized representative of LG-Nortel Co.Ltd 30Description When a user doesn’t want to receive a call, this function can be used. Operation To Activate Do Not Disturb(DND) Press [SYSTEM] (left key in navigation) + select {DND} button + [ OK ] To Deactivate Do Not Disturb(DND) Press [SYSTEM] (left key in navigation) + select {DND} button + [ OK ] 5.2.9 System Speed Dial Description This is the same function as implemented in iPECS with the title of “System Speed Dialing”. Please refer to manual of iPECS. To dial a Station Speed Dial Bin - Press the [LEFT] in navigation key + '6'. - Dial the Station Speed Dial bin (200~999 for the MFIM and 2000 to 4999 for the LiK300). To redial last Station Speed Dial Bin - Press the [LEFT] in navigation key + '6'. - Press '*' to redial last system speed number. To redial saved Station Speed Dial Bin - Press the [LEFT] in navigation key + '6'. - Press '#' to redial saved system speed number. 5.2.10 PTT Groups Description Each WIT-400H station is assigned to receive PTT announcements from each PTT group. A station can be assigned to any, all or no groups. This function makes WIT-400H join in a PTT group defined in iPECS. Operation](https://usermanual.wiki/Ericsson-LG/WIT400H/User-Guide-1205877-Page-31.png)
![WIT-400H User Manual Issue: 0.1A Date: 28/July/2009This Document Contains proprietary information and may not be reproduced or copied without express Written permission of a duly authorized representative of LG-Nortel Co.Ltd 356.1.2 Main Menu Tree The following tree depicts the menu organization of WIT-400H. 6.2 Phone Book [Menu + 1] This menu allows you to save and manage contact address information. The Phone Book functions provides functions to add a new address or search saved contact addresses by name, phone number and group. 6.2.1 Add New [Menu+1+1] This menu allows you to add a new contact address. You can input contact address information including name, phone numbers, email address, group information items, hompage address, job information, personal bell, and memo 6.2.2 Search [Menu+1+2] This menu allows you to search your contact addresses. Generally the search operation is performed by name. In the search window, the current search function and results for the search condition are displayed. You can change the configuration in the [Menu] menu so that you send a](https://usermanual.wiki/Ericsson-LG/WIT400H/User-Guide-1205877-Page-36.png)
![WIT-400H User Manual Issue: 0.1A Date: 28/July/2009This Document Contains proprietary information and may not be reproduced or copied without express Written permission of a duly authorized representative of LG-Nortel Co.Ltd 36message, change search option, edit, and delete to the selected phone number. You can also make a phone call to the selected phone number by pressing [send] ( ).6.2.3 Caller Groups [Menu+1+3] This menu allows you to manage group information. By default, there are 4 groups: family, friends, business and school. You can edit and delete a group except 4 default groups. You can also configure ring tone for a group so that the group ring tone sounds when a call from a specific contact address within that group arrives and there is no ring tone configured for the contact address. 6.2.4 Speed Dials [Menu+1+4] Description Speed dialing allows user to make an outgoing call at a specific number through pressing down by either one or two button(s). Both the number and an associated button are to be registered in the “Speed Dials” submenu in “Phonebook” menu. Since it is originally intended with one or two buttons maximally, user can associate 99 phone numbers with speed buttons; from 1 ~ 99. Operation Associating a phone number with Speed Dial button. Select [PhoneBook] + Select [Speed Dials] + Select a number to be speedy dialed + [OK] Making a call Suppose that you associated phone number “123” with speed dial “1”, Enter a speed dial number from 1 to 99 and Press [Send]. ConditionOnly the number in the Phone Book can be registered in the list of speed dial.](https://usermanual.wiki/Ericsson-LG/WIT400H/User-Guide-1205877-Page-37.png)
![WIT-400H User Manual Issue: 0.1A Date: 28/July/2009This Document Contains proprietary information and may not be reproduced or copied without express Written permission of a duly authorized representative of LG-Nortel Co.Ltd 376.2.5 Delete All [Menu + 1 + 5] This menu deletes all saved phonebook address information. 6.3 Sound Setting [Menu + 2] You can configure voice/vibration ringtone, key tone, sound effect, and volume. Sound menu have the submenus as shown below. Alert by This menu determines the incoming call notification mode. You can select from Crescendo, Ring, Vibration, Ring after vibration, Ring & Vibration, Mute, and Vibrate once. Ring Tone This menu determines the ring tone for incoming call notification. WIT-400H supports 50 different ring tones.Ring Tone Volume This menu determines the ring tone volume for incoming call notification. Power-on Tone This menu determines the switch on effect that is sounded when the WIT-400H is turned on. Power-off Tone This menu determines the switch off effect that is sounded when the WIT-400H is turned off.](https://usermanual.wiki/Ericsson-LG/WIT400H/User-Guide-1205877-Page-38.png)
![WIT-400H User Manual Issue: 0.1A Date: 28/July/2009This Document Contains proprietary information and may not be reproduced or copied without express Written permission of a duly authorized representative of LG-Nortel Co.Ltd 38Key Tone This menu determines the key tone that is sounded when a key is pressed. Key Tone Volume This menu determines the volume of the key tone. Effect Sound This menu determines the confirm tone that is sounded. 6.4 Display Setting [Menu + 3] In this menu, you can configure screen display options including Screen settings and themes. Screen Theme Screen playback in an idle state is defined here. Greeting Note You can configure the statement below in the idle state Idle Clock You can configure the font size and color of the clock displayed on the main screen. You can configure size to Do not show, Small or Large. If Small or Large is selected, you can set the color using the color chart.](https://usermanual.wiki/Ericsson-LG/WIT400H/User-Guide-1205877-Page-39.png)
![WIT-400H User Manual Issue: 0.1A Date: 28/July/2009This Document Contains proprietary information and may not be reproduced or copied without express Written permission of a duly authorized representative of LG-Nortel Co.Ltd 39Dialing Font You can configure dialing font size and color Menu Style You can configure the menu style to Grid style or List style.BackLight Use this to select whether or not the phone uses the backlight. Item Default Value Standard LCD duration : 10 sec LCD brightness : Brightest Saving LCD duration : 5 sec LCD brightness : Bright Ultra Saving LCD duration : 5 sec LCD brightness : Normal User settings LCD duration : 5sec, 10sec, 20sec, 30sec,1min, 3min, Always On LCD brightness : Normal, Bright, Brightest Font Type You can choose two kinds of font, cyon and spring Language/㠎㠊You can choose 7 languages including English 6.5 Call History [Menu + 4] 6.5.1 Call History You can check out the recent call record by pressing the [send] ( ). Each icon show you the type of the recent calls registered in the list. The call record provides the following functions. (see following page for icon description)](https://usermanual.wiki/Ericsson-LG/WIT400H/User-Guide-1205877-Page-40.png)
![WIT-400H User Manual Issue: 0.1A Date: 28/July/2009This Document Contains proprietary information and may not be reproduced or copied without express Written permission of a duly authorized representative of LG-Nortel Co.Ltd 426.6 Messages [Menu + 5] A user can send/receive short text message to/from others. 6.6.1 Write Message You can write and edit a single text message up to 100 characters and send a message to maximum 20 different numbers. A user can send a text message through this menu. Condition1. You can not assure message sending. 2. If a message is sent all wrong destination, LCD displays ‘Access Denied’ 3. You can save the message to draft box. 4. If you receive a incoming ring during writing a message, you will lost a message. 6.6.2 Inbox A user can browse the messages stored in his mail box. Any messages arrived in the WIT-400H is stored in this mailbox. Condition1. You can get maximum 30 messages. If you does not delete messages, you can not receive more messages. 6.6.3 Outbox You can view sent messages. Select a message and then press the [OK] key to view the message. Messages are stored in this mailbox even if you does not success message sending. You can hold maximum 30 messages in this mailbox. 6.6.4 Draft You can view saved messages. Select a message and then press the [OK] key to view the message. You can hold maximum 10 messages in this mailbox.](https://usermanual.wiki/Ericsson-LG/WIT400H/User-Guide-1205877-Page-43.png)
![WIT-400H User Manual Issue: 0.1A Date: 28/July/2009This Document Contains proprietary information and may not be reproduced or copied without express Written permission of a duly authorized representative of LG-Nortel Co.Ltd 446.7 Tools [Menu + 6] 6.7.1 Schedule Scheduler keeps your agenda convenient and easy to access. Simply store your appointments and your phone alerts you with a reminder of your appointment. You can also take advantage of the Alarm Clock feature. You can make 500 schedules. Monthly Schedule Management 1. Select the Tools form the top menu. 2. Select Schedule and press the key.3. The monthly view is displayed. 4. Initially, the cursor appears on today’s date according to your WIT-400H settings. 5. You can move the date cursor to the desired location using the up, down, left and right navigation keys. 6. On a date where a schedule item, anniversary or birthday is saved, corresponding icons and the number of saved schedule items are displayed on the bottom left of the screen Adding a New Schedule Item 1. Select the left soft key [Menu] in the Monthly schedule management screen, select the Add from the popup menu and then press the key. Alternatively, select the right soft key [Add] in the Monthly schedule management screen. 2. Input the desired date using the numeric keys. 3. Input the desired time using the numeric keys. 4. Input the subject 5. Select the schedule item type using the left and right navigation keys. 6. Select the repeat type using the left and right navigation keys. 7. Select the alarm type using the left and right navigation keys. 8. Press the key to save the new schedule item. Condition](https://usermanual.wiki/Ericsson-LG/WIT400H/User-Guide-1205877-Page-45.png)
![WIT-400H User Manual Issue: 0.1A Date: 28/July/2009This Document Contains proprietary information and may not be reproduced or copied without express Written permission of a duly authorized representative of LG-Nortel Co.Ltd 451. We support time formats yyyy/mm/dd, mm/dd/yyyy or dd/mm/yyyy. Deleting a Schedule Item 1. Select the left soft key [Menu] in the Monthly schedule management screen, select Delete, and then press the key. 2. Popup menus including Delete past, Multiple delete and Delete all will be display 3. Select Delete past and press the key to delete all schedule items prior to today. 4. Select Multiple delete and press the key. A screen asking you to specify the term to delete schedule items for will then appear. In this screen, input the desired term and press the key to delete the schedule items within the specified period. 5. Select Delete all, and press the key to delete all of the schedule items. Condition2. Delete past does not delete schedules prior to current time today. Set holiday 1. Select the left soft key [Menu] in the Monthly schedule management screen, select Holiday and then press the key to display the Holiday configuration popup window.](https://usermanual.wiki/Ericsson-LG/WIT400H/User-Guide-1205877-Page-46.png)
![WIT-400H User Manual Issue: 0.1A Date: 28/July/2009This Document Contains proprietary information and may not be reproduced or copied without express Written permission of a duly authorized representative of LG-Nortel Co.Ltd 462. Supported holiday types include On the day, Weekly, Monthly, Annually and Multiple setting. 3. Select the holiday configuration type and press the key to configure the holiday. 4. The date corresponding to the configured holiday is represented in green in the Monthly schedule management screen. Condition3. Weekly set holiday during 52 week. 4. Monthly set holiday during 12 month. 5. Yearly set holiday during 5 years Searching for a Schedule Item Select the left soft key [Menu] in the Monthly schedule management screen, select Search and then press the key to display the Search schedule items screen. 1. Input the desired subject of the schedule item to find 2. Select the schedule type to find. 3. Press the key 4. If there are schedule items that meet the search criteria, the schedule items are displayed. If there is no schedule item satisfying the search criteria, No match schedule Item message appears. Moving to a Specific Date 1. Select the left soft key [Menu] in the Monthly schedule management screen, select Go to date and then press the key to display Go to date window. 2. Input the desired date to move to and press the key. 3. The date cursor of the Monthly schedule management screen will then move to the specified date.](https://usermanual.wiki/Ericsson-LG/WIT400H/User-Guide-1205877-Page-47.png)
![WIT-400H User Manual Issue: 0.1A Date: 28/July/2009This Document Contains proprietary information and may not be reproduced or copied without express Written permission of a duly authorized representative of LG-Nortel Co.Ltd 47Go to Today 1. Select the left soft key [Menu] in the Monthly schedule management screen, select the Today and then press the key. 2. The date cursor of the Monthly schedule management screen will then move to today’s date. 6.7.2 Memo This menu allows you to write down small amount of manuscript of what you have to remember. You can make 30 memos.Saved Memo’s 1. Select the Tools from the top menu. 2. Select the Memo item and press the key 3. The saved memo list is displayed. Memo Add 1. To add a new memo, select Add using the left soft key [Menu] in the Memo screen or select the right soft key [Add]. 2. Input the contents of the memo to be saved. 3. Press the key to save the memo. Memo Delete / Delete All 1. Select the desired item to delete from the Memo list and select Delete using the left soft key [Menu] to delete the memo. 2. Select Delete all using the left soft key [Memo] to delete all the saved memos. hG](https://usermanual.wiki/Ericsson-LG/WIT400H/User-Guide-1205877-Page-48.png)
![WIT-400H User Manual Issue: 0.1A Date: 28/July/2009This Document Contains proprietary information and may not be reproduced or copied without express Written permission of a duly authorized representative of LG-Nortel Co.Ltd 486.7.3 Alarm ClockThe alarm function allows you to set up multiple separate alarms. You can also set the time, repetition interval and alarm sound. You can make 3 alarm clocks.z Select your desired alarm to configure in the alarm list. If there is no alarm, press the right soft key [New] to add a new alarm. z Input alarm time: Input your desired alarm time by specifying hour and minute. If the time format is 12 hours-based format, you have to select either ‘am’ or ‘pm’ using the right soft key. z Select repeat mode: Select desired repeat mode using the navigation key. z Select bell: Select the bell to use for the alarm using the navigation key. z Input memo: Input alarm name. z Set/Cancel alarm: On or Off the alarm using the navigation key. When you have completed configuration, press the key to save the changed alarm configuration. Note:1. The alarm function does not work if the handset is turned off. 2. During voice call, the alarm works in vibration mode. 6.7.4 Calculator The calculator function allows you to add, subtract, multiple and divide. You can input numbers using the number keys, and operators using the up, down, left, and right navigation key. You can input a decimal point by pressing the left soft key. Whenever you press the [Clear/Prev], characters are sequentially deleted in reverse direction.](https://usermanual.wiki/Ericsson-LG/WIT400H/User-Guide-1205877-Page-49.png)
![WIT-400H User Manual Issue: 0.1A Date: 28/July/2009This Document Contains proprietary information and may not be reproduced or copied without express Written permission of a duly authorized representative of LG-Nortel Co.Ltd 496.7.5 World TimeThe World Time function provides time information on major cities worldwide. 1. You can view the time of desired country or city using the navigation 2. You can select a desired city as home using the {Home} key. 3.Note:1. In the list, you can not go to a wanted list by pressing dial button in case of more than 9. 6.7.6 D-dayD-day finder The D-day finer shows the number of remaining days until the specified day of event. D-day Counter You can make 20 D-day counters.1. Select the D-day Counter menu. 2. Select the desired item in the list to view Title, target date on days remaining. 3. Press the key to view the list. 4. Press the right soft key [Add] to input title and new date. Then press the key to add the item in the list.](https://usermanual.wiki/Ericsson-LG/WIT400H/User-Guide-1205877-Page-50.png)
![WIT-400H User Manual Issue: 0.1A Date: 28/July/2009This Document Contains proprietary information and may not be reproduced or copied without express Written permission of a duly authorized representative of LG-Nortel Co.Ltd 506.8 Settings [Menu + 8] 6.8.1 Profile SettingThis menu allows you to set a Wireless Network Profile Add a Profile You can start to add a profile by pressing the ‘Add’ soft menu on the profile setting screen or “802.11b/g config” screen shown by pressing the right navigation key in an idle mode. Step 1. Add Profile You should fill up the profile name and the network name. Step 2. Security Setting You can set security or skip this step by choosing 'NONE' Step 3. 802.1X Authentication You can set 802.1X Authentication values or skip this step by choosing 'NONE'](https://usermanual.wiki/Ericsson-LG/WIT400H/User-Guide-1205877-Page-51.png)
![WIT-400H User Manual Issue: 0.1A Date: 28/July/2009This Document Contains proprietary information and may not be reproduced or copied without express Written permission of a duly authorized representative of LG-Nortel Co.Ltd 52Phone Number Phone number for registration Password The password which is set in the system SIP Domain The IP address of the system Proxy IP The IP address of the system Proxy Port The port number for SIP signaling (default: 5060) 6.8.3 Provisioning SettingThe provisioning server IP, user ID and password can be set in this menu for auto provisioning. Note) This feature support from iPECS-LIK v5.5. 6.8.4 Wireless LAN SettingThis menu allows you to set Wireless LAN values Roaming Level, Roaming Sensitivity and Roaming DeltaSNR6.8.5 SecuritySecurity options are provided to lock the WIT-400H for privacy. When one of the lock mode is enabled, the user should enter password in advance of normal operation. Lock Phone You can lock the phone. If you lock the phone, WIT-400H asks you to enter password on trying to use it. You can also change the password for the lock mode here. [Password Management] For new password setting, a user should enter two items; a new password and an asking to be questioned when he will change the password. When he forgot both of them, he should contact the seller.](https://usermanual.wiki/Ericsson-LG/WIT400H/User-Guide-1205877-Page-53.png)
