Ericsson Wi Fi 20001003 WLAN Radio Module User Manual BRM3 Manual

Download:
Mirror Download [FCC.gov]
Document ID	628175
Application ID	P0K28JcEJNtpv3Hcz6VXDQ==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	6.48kB (81058 bits)
Date Submitted	2006-02-13 00:00:00
Date Available	2006-02-13 00:00:00
Creation Date	2006-01-16 09:52:42
Producing Software	Acrobat Distiller 6.0 (Windows)
Document Lastmod	2006-01-16 09:52:42
Document Title	Microsoft Word - BRM3_Manual.doc
Document Creator	PScript5.dll Version 5.2.2
Document Author:	cwilliams

B2CC033AA
B2CC033AA Product Manual
5 GHz WLAN Radio Module
Document Date:
Document Number:
Document Version Number:
Document Status:
January 2006
PM-B2CC033AA
Release
© Copyright 2006 by BelAir Networks.
All rights reserved..
Page 1 of 15
B2CC033AA Product Manual – 5 GHz WLAN Radio Module
January 2006
Page 2 of 15
PM-B2CC033AA Version 1
B2CC033AA Product Manual – 5 GHz WLAN Radio Module
Contents
About this Document ............................................................. 3
Introduction ............................................................................. 4
Conditions of Use.................................................................... 5
Module Installation and Service ............................................ 7
Final Product Requirements .................................................. 8
Regulatory Statements......................................................... 12
About this Document
This document is a product manual for the B2CC033AA 5 GHz WLAN Radio
Module, including its limitations on use in any product marketed or offered for
sale. It is intended as a supplement to training and documentation by BelAir
Networks Inc. or its authorized agents.
January 2006
Page 3 of 15
PM-B2CC033AA Version 1
B2CC033AA Product Manual – 5 GHz WLAN Radio Module
Introduction
The B2CC033AA (hereafter referred to as “the module”) is a 5 GHz radio
module compatible with the IEEE 802.11 standard for Wireless LAN
operation. It is designed to be interoperable with WLAN products which are
based on Direct Sequence Spread Spectrum (DSSS) radio technology.
The module contains a complete 802.11a radio and Medium Access Control
(MAC) protocol engine which allows implementation of an 802.11a module.
The module is not intended for stand-alone operation. It will only be
marketed as a complete product, in conjunction with a package, DC power
supply and antenna (hereafter referred to as “the product” or the “final
product”).
Since the module has a BelAir networks proprietary digital interface, it cannot
be directly connected to any standard telecommunications or computer
devices. It can only be used with final products designed and authorized
specifically for that purpose.
January 2006
Page 4 of 15
PM-B2CC033AA Version 1
B2CC033AA Product Manual – 5 GHz WLAN Radio Module
Conditions of Use
General Conditions of Use
This manual is intended to supplement training provided by BelAir Networks
or authorized parties. The module B2CC033AA is only intended for use in
BelAir Networks products and is not for sale to the general public as a standalone module.
Please read this entire document, including the Regulatory Statements section
before attempting to install or operate the module.
Warning:
Any use of B2CC033AA in any manner which is not expressly
specified within this manual or specifically approved by BelAir Networks or its
authorized agents will void the user’s right to operate this module, and is
expressly forbidden by BelAir Networks. This includes any modification of the
module, installation of the module in a configuration or used with an antenna
which is not expressly listed in this document or approved by BelAir
Networks.
List of Approved Final Products
The B2CC033AA module is only approved for use in the following BelAir
Networks products:
•
BelAir200. See BelAir200 documentation for complete manufacturing
instructions.
•
BelAir100. See BelAir100 documentation for complete manufacturing
instructions.
•
BelAir50c. See BelAir50c documentation for complete manufacturing
instructions.
Operation of the module within the products expressly listed above is
required to ensure compliance to all FCC and Industry Canada regulations.
Any modification of the module, or its use in any configuration not expressly
listed above may void the user’s right to operate this module.
January 2006
Page 5 of 15
PM-B2CC033AA Version 1
B2CC033AA Product Manual – 5 GHz WLAN Radio Module
Country of Use
B2CC033AA is certified with limited modular approval for use as an
Intentional Radiator in the United States as device: FCC ID: RAR20001003
and in Canada as IC: 4674A-20001003. Please read all regulatory statements
at the end of this document before any attempt to install or operate this
module.
The module is only certified for operation in the United States and Canada.
Before attempting to install and operate this module in any other country,
contact BelAir Networks for approval.
Module Labeling
One or more labels are applied to the module during manufacture, including a
label which identifies the FCC and Industry Canada identification numbers. Do
not attempt to remove any labels from the module.
January 2006
Page 6 of 15
PM-B2CC033AA Version 1
B2CC033AA Product Manual – 5 GHz WLAN Radio Module
Module Installation and Service
Installation into a Product
The module shall only be installed by a technician trained by BelAir Networks
or its authorized agents. It should only be installed into an approved product
(see above) following all manufacturing and service procedures for that
product. The module should only be installed into a final product in a
manufacturing or service depot site.
Caution: B2CC033AA is an electro-static discharge (ESD) sensitive device.
All appropriate ESD measures must be taken when handling the module.
Failure to employ appropriate ESD protection may damage the module.
Module Service
The module is not intended as a field-serviceable unit. It contains no fieldreplaceable or field-serviceable parts, or any external adjustable mechanisms.
The module should only be serviced in a manufacturing or service depot site
approved by BelAir Networks or its authorized agents.
January 2006
Page 7 of 15
PM-B2CC033AA Version 1
B2CC033AA Product Manual – 5 GHz WLAN Radio Module
Final Product Requirements
The requirements below apply to any final product in which the B2CC033AA
module is installed.
Antenna Usage and Module Transmit Power
B2CC033AA module shall only be used in conjunction with the following
antenna types:
•
BelAir Networks models BMA000210 and BMA000203: 10 and 15 dBi
antennas.
•
MaxRad model: MMO58004NF, 4 dBi omni-directional antenna.
•
MaxRad model: MMO58010NF, 10 dBi omni-directional antenna.
•
Huber+Suhner model: SPA 5600/9/23/0/V, 23 dBi omni-directional antenna.
In order to comply with the FCC and Industry Canada rules in the USA and
Canada, respectively, it is required to respect the maximum transmit power
limits as follows for each of the antenna types.
Antenna Models and Maximum Allowable Power Setting
Frequency Band
5.15 – 5.25 GHz
Channels Location
36 to 50
Maximum Rated Transmit Power with Antenna
Type
Indoor Only
Antenna
5.25 – 5.35 GHz
53 to 66
Gain
Max Rated Transmit
Power
MaxRad MMO58004NF
4 dBi
16 dBm
MaxRad MMO58010NF
BelAir BMA000210
10 dBi
12 dBm
BelAir BMA000203
15 dBi
7 dBm
H+S SPA 5600/9/23/0/V
23 dBi
Not for use in this band.
Indoor /
January 2006
Page 8 of 15
PM-B2CC033AA Version 1
B2CC033AA Product Manual – 5 GHz WLAN Radio Module
Outdoor
Max Rated Transmit Power
Antenna
5.725 – 5.850 GHz
148 to 167
Indoor /
Outdoor
Gain
Channel
53
Channel
54-65
Channel
66
MaxRad MMO58004NF
4 dBi
20 dBm
20 dBm
18 dBm
MaxRad MMO58010NF
BelAir BMA000210
10
dBi
17 dBm
20 dBm
17 dBm
BelAir BMA000203
15
dBi
15 dBm
15 dBm
15 dBm
H+S SPA 5600/9/23/0/V
23
dBi
7 dBm
7 dBm
7 dBm
Antenna
Gain
Max Rated Transmit
Power
MaxRad MMO58004NF
4 dBi
20 dBm
MaxRad MMO58010NF
BelAir BMA000210
10 dBi
20 dBm
BelAir BMA000203
15 dBi
20 dBm
H+S SPA 5600/9/23/0/V
23 dBi
20 dBm (P2P)*
else
13 dBm
* P2P indicates that the rated transmit power is only permissible for use in
point-to-point links. For point-to-multipoint or multipoint-to-multipoint links
the power must be reduced as shown.
Warning:
Use of this module in conjunction with any antenna not
expressly listed above will void authority to install or operate this equipment.
Warning:
Setting of module transmit power above the limits specified in
the above table for a particular combination of antenna type, frequency of
operation, and type of usage, will exceed FCC or Industry Canada limits and
void authority to install or operate this equipment.
January 2006
Page 9 of 15
PM-B2CC033AA Version 1
B2CC033AA Product Manual – 5 GHz WLAN Radio Module
Product Installation
Products which contain B2CC033AA-A shall only be installed by professional
installers trained by BelAir Networks or its authorized agents. In addition to
normal installation procedures and good installation practice, professional
installers are responsible to ensure that:
1. Only an approved antenna (see above) is connected to the module, and,
2. The antenna is mounted in such a manner and in such a location that
access to the antenna by the general population is minimized. Access to
the antenna by the general population should be limited to more than the
minimum safety distance. This distance is:
•
25 cm (9.8 inches) for operation in all bands with the 4 and 10 dBi
antennas.
•
25 cm (9.8 inches) for operation in the 5.15-5.35 GHz bands with the
15 dBi antenna, and operation in the 5.25 – 5.35 GHz bands with the
23 dBi antenna.
•
33 cm (113 inches) for operation in the 5.725 – 5.850 GHz band with
the 15 dBi antenna.
•
72 cm (28.3 inches) for operation in the 5.725 to 5.850 GHz with the
23 dBi antenna.
Adherence to these rules by the professional installer is mandatory. See full
installation procedures for the particular product for details.
Product Labeling
The following permanent label, or one containing equivalent information, must
be affixed in a conspicuous location on the exterior of every product
containing this module:
This device contains the following:
FCC ID: RAR20001003
IC: 4674A-20001003
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2)
This device must accept any interference received, including
interference that may cause undesired operation.
January 2006
Page 10 of 15
PM-B2CC033AA Version 1
B2CC033AA Product Manual – 5 GHz WLAN Radio Module
January 2006
Page 11 of 15
PM-B2CC033AA Version 1
B2CC033AA Product Manual – 5 GHz WLAN Radio Module
Regulatory Statements
The following regulatory notes apply to the product which contains module
B2CC033AA. The following sections or equivalent information shall appear in
the user-manual of the final product.
Regulatory Information and Disclaimers
Installation and use of this device must be in strict accordance with the
instructions included in the user documentation provided with the product.
Any changes or modifications to this product not expressly approved by the
party responsible for compliance could void the user’s authority to operate
this equipment.
The manufacturer is not responsible for any interference to radio or television
equipment caused by unauthorized modification of this device, or attachment
of any antennas or equipment other than those specified by the manufacturer.
The manufacturer or its authorized resellers or distributors will assume no
liability for any damage or violation of government regulations arising from
failing to comply with these guidelines.
Manufacturer’s FCC Conformity Statement
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions (1) this device may not
cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
FCC Interference Statement
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
January 2006
Page 12 of 15
PM-B2CC033AA Version 1
B2CC033AA Product Manual – 5 GHz WLAN Radio Module
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
Manufacturer’s Industry Canada Conformity Statement
This device has been designed to operate with an antenna having a maximum
gain of 23 dB. Antenna having a higher gain is strictly prohibited per
regulations of Industry Canada. The required antenna impedance is 50 ohms.
Operation is subject to the following two conditions: (1) this device may not
cause interference, and (2) this device must accept any interference, including
interference that may cause undesired operation of the device.
To reduce potential radio interference to other users, the antenna type and its
gain should be so chosen that the equivalent isotropically radiated power
(EIRP) is not more than that required for successful communication.
This Class B Digital apparatus meets all the requirements of the Canadian
Interference-Causing Equipment Regulations.
RF Exposure Statement
This Wireless LAN radio device has been evaluated under FCC Bulletin OET
65C and found to be compliant to the requirements set forth in CFR 47
Sections 2.1091, 2.1093, and 15.247 (b) (4) addressing RF exposure from radio
frequency devices.
January 2006
Page 13 of 15
PM-B2CC033AA Version 1
B2CC033AA Product Manual – 5 GHz WLAN Radio Module
This device complies with FCC RF radiation exposure limits for an
uncontrolled environment. The radiated output power of this Wireless LAN
device is below the FCC radio frequency exposure limits. However, this
device should still be installed and used in such a manner that the potential for
human contact during normal operation is minimized. In order to comply with
RF exposure limits established in the ANSI C95.1 standard, this equipment
should be installed and operated at a minimum distance between the radiator
and a human body. This minimum distance is:
•
25 cm (9.8 inches) for operation in all bands with the 4 and 10 dBi
antennas.
•
25 cm (9.8 inches) for operation in the 5.15-5.35 GHz bands with the
15 dBi antenna, and operation in the 5.25 – 5.35 GHz bands with the
23 dBi antenna.
•
33 cm (113 inches) for operation in the 5.725 – 5.850 GHz band with
the 15 dBi antenna.
•
72 cm (28.3 inches) for operation in the 5.725 to 5.850 GHz with the
23 dBi antenna.
January 2006
Page 14 of 15
PM-B2CC033AA Version 1
B2CC033AA Product Manual – 2.4 GHz WLAN Radio Module
BelAir Networks U.S. East
11921 Freedom Drive
Suite 550
Reston, VA
USA
20190
BelAir Networks U.S. West
1902 Wright Place
Suite 200
Carlsbad, CA
USA
92008
BelAir Networks Inc.
603 March Road
Kanata, Ontario
Canada
K2K 2M5
703-736-8306
760-918-5544
613-254-7070
January 2006
Sales
sales@belairnetworks.com
Support
support@belairnetworks.com
General Information
Info@belairnetworks.com
Page 15 of 15
PM-B2CC033AA Version 1

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Page Count                      : 15
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:b62175fe-09dd-4ae4-9348-b9fb1a42ce3d
Producer                        : Acrobat Distiller 6.0 (Windows)
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2006:01:16 09:52:42-05:00
Create Date                     : 2006:01:16 09:52:42-05:00
Document ID                     : uuid:44922d45-d481-4017-90ce-6a016bb44665
Format                          : application/pdf
Title                           : Microsoft Word - BRM3_Manual.doc
Creator                         : cwilliams
Author                          : cwilliams

EXIF Metadata provided by EXIF.tools