Ericsson Wi Fi 20005002 WLAN Radio Module with Antenna Switch Module User Manual PM B2CC001AA E Manual

Download:
Mirror Download [FCC.gov]
Document ID	629196
Application ID	EPt30hoYTVxl7PZ7V6WOGQ==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	5.96kB (74489 bits)
Date Submitted	2006-02-16 00:00:00
Date Available	2006-02-16 00:00:00
Creation Date	2006-02-13 14:41:22
Producing Software	Acrobat Distiller 6.0 (Windows)
Document Lastmod	2006-02-13 14:41:22
Document Title	Microsoft Word - PM-B2CC001AA-E_Manual.doc
Document Creator	PScript5.dll Version 5.2.2
Document Author:	cwilliams

FCC ID: RAR20005002
RAR20005002 Product Manual
5 GHz WLAN Module with Antenna Switch Module
Document Date:
Document Number:
Document Version Number:
Document Status:
January 2006
PM-RAR20005002
Release
© Copyright 2005 by BelAir Networks.
All rights reserved..
Page 1 of 12
RAR20005002 Product Manual – 5 GHz WLAN Radio Module with Antenna Switch Module
Contents
About this Document ............................................................. 2
Introduction ............................................................................. 3
Conditions of Use.................................................................... 4
Module Installation and Service ............................................ 6
Final Product Requirements .................................................. 7
Regulatory Statements........................................................... 9
About this Document
This document is a product manual for the FCC ID: RAR20005002, 5 GHz
WLAN Radio Module with Antenna Switch Module, including its limitations on
use in any product marketed or offered for sale. It is intended as a supplement
to training and documentation by BelAir Networks Inc. or its authorized
agents.
January 2006
Page 2 of 12
PM-RAR20005002 version 1
RAR20005002 Product Manual – 5 GHz WLAN Radio Module with Antenna Switch Module
Introduction
The RAR20005002 (hereafter referred to as “the module”) is a 5 GHz radio
module compatible with the IEEE 802.11 standard for Wireless LAN
operation. It is designed to be interoperable with WLAN products which are
based on Direct Sequence Spread Spectrum (DSSS) radio technology.
The module contains a complete 802.11a radio and Medium Access Control
(MAC) protocol engine which allows implementation of an 802.11a device.
The module is not intended for stand-alone operation. It will only be
marketed as a complete product, in conjunction with a package, DC power
supply and antenna (hereafter referred to as “the product” or the “final
product”).
Since the module has a BelAir networks proprietary digital interface, it cannot
be directly connected to any standard telecommunications or computer
devices. It can only be used with final products designed and authorized
specifically for that purpose.
January 2006
Page 3 of 12
PM-RAR20005002 version 1
RAR20005002 Product Manual – 5 GHz WLAN Radio Module with Antenna Switch Module
Conditions of Use
General Conditions of Use
This manual is intended to supplement training provided by BelAir Networks
or authorized parties. The module RAR20005002 is only intended for use in
BelAir Networks products and is not for sale to the general public as a standalone module.
Please read this entire document, including the Regulatory Statements section
before attempting to install or operate the module.
Warning:
Any use of RAR20005002 in any manner which is not
expressly specified within this manual or specifically approved by BelAir
Networks or its authorized agents will void the user’s right to operate this
module, and is expressly forbidden by BelAir Networks. This includes any
modification of the module, installation of the module in a configuration or
used with an antenna which is not expressly listed in this document or
approved by BelAir Networks.
List of Approved Final Products
The RAR20005002 module is only approved for use in the following BelAir
Networks products:
•
BelAir200.
See product assembly instructions for complete details.
Operation of the module within the products expressly listed above is
required to ensure compliance to all FCC and Industry Canada regulations.
Any modification of the module, or its use in any configuration not expressly
listed above may void the user’s right to operate this module.
Country of Use
RAR20005002 is certified with limited modular approval for use in the United
States as an Intentional Radiator as device: FCC ID: RAR20005002 and in
January 2006
Page 4 of 12
PM-RAR20005002 version 1
RAR20005002 Product Manual – 5 GHz WLAN Radio Module with Antenna Switch Module
Canada as IC: 4674A-20005002. Please read all regulatory statements at the
end of this document before any attempt to install or operate this module.
The module is only certified for operation in the United States and Canada.
Before attempting to install and operate this module in any other country,
contact BelAir Networks for approval.
Module Labeling
One or more labels are applied to the module during manufacture, including a
label which identifies the FCC and Industry Canada identification numbers. Do
not attempt to remove any labels from the module.
January 2006
Page 5 of 12
PM-RAR20005002 version 1
RAR20005002 Product Manual – 5 GHz WLAN Radio Module with Antenna Switch Module
Module Installation and Service
Installation into a Product
The module shall only be installed by a technician trained by BelAir Networks
or its authorized agents. It should only be installed into an approved product
(see above) following all manufacturing and service procedures for that
product. The module should only be installed into a final product in a
manufacturing or service depot site.
Caution: RAR20005002 is an electro-static discharge (ESD) sensitive device.
All appropriate ESD measures must be taken when handling the module.
Failure to employ appropriate ESD protection may damage the module.
Module Service
The module is not intended as a field-serviceable unit. It contains no fieldreplaceable or field-serviceable parts, or any external adjustable mechanisms.
The module should only be serviced in a manufacturing or service depot site
approved by BelAir Networks or its authorized agents.
January 2006
Page 6 of 12
PM-RAR20005002 version 1
RAR20005002 Product Manual – 5 GHz WLAN Radio Module with Antenna Switch Module
Final Product Requirements
The requirements below apply to any final product in which the RAR20005002
module is installed.
Antenna Usage
RAR20005002 module shall only be used in conjunction with the following
antenna types:
•
BelAir Networks model: BMA000203, 15 dBi directional antenna,
horizontal beamwidth 45 degrees.
•
BelAir Networks model: BMA000221, 12.5 dBi directional antenna,
horizontal beamwidth 45 degrees.
•
BelAir Networks model: BMA000210, 10 dBi directional antenna,
horizontal beamwidth 65 degrees.
Warning: Use of this module in conjunction with any antenna not expressly
listed above may void authority to install or operate this equipment.
Product Installation
Products which contain RAR20005002 shall only be installed by professional
installers trained by BelAir Networks or its authorized agents. In addition to
normal installation procedures and good installation practice, professional
installers are responsible to ensure that:
1. Only an approved antenna (see above) is connected to the module,
2. The antenna is mounted in such a manner and in such a location that
access to the antenna by the general population is minimized. During
normal operation, access to the antenna by the general population should
be limited to greater than the following distances:
•
25 cm (9.8 inches) for operation in the 5.15 – 5.35 GHz band.
•
33 cm (13 inches) for operation in the 5.725 – 5.850 GHz band.
3. Only the approved BelAir Networks AC power cable (model BMC200003)
may be used when this module is deployed with the BelAir200 product.
Use of any other power cable may void the regulatory approvals of the
January 2006
Page 7 of 12
PM-RAR20005002 version 1
RAR20005002 Product Manual – 5 GHz WLAN Radio Module with Antenna Switch Module
BelAir200 and is prohibited. The BelAir-supplied power cable includes
emission suppression components as part of the cable assembly (Steward
28A5776-0A2 and Nexter NF-65).
Adherence to these rules by the professional installer is mandatory. See full
installation procedures for the particular product for details.
Product Labeling
The following permanent label, or one containing equivalent information, must
be affixed in a conspicuous location on the exterior of every product
containing this module:
This device contains the following:
FCC ID: RAR20005002
IC: 4674A-20005002
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2)
This device must accept any interference received, including
interference that may cause undesired operation.
January 2006
Page 8 of 12
PM-RAR20005002 version 1
RAR20005002 Product Manual – 5 GHz WLAN Radio Module with Antenna Switch Module
Regulatory Statements
The following regulatory notes apply to the product which contains module
FCC ID: RAR20005002. The following sections or equivalent information
shall appear in the user-manual of the final product.
Regulatory Information and Disclaimers
Installation and use of this device must be in strict accordance with the
instructions included in the user documentation provided with the product.
Any changes or modifications to this product not expressly approved by the
party responsible for compliance could void the user’s authority to operate
this equipment.
The manufacturer is not responsible for any interference to radio or television
equipment caused by unauthorized modification of this device, or attachment
of any antennas or equipment other than those specified by the manufacturer.
The manufacturer or its authorized resellers or distributors will assume no
liability for any damage or violation of government regulations arising from
failing to comply with these guidelines.
Manufacturer’s FCC Conformity Statement
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions (1) this device may not
cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
FCC Interference Statement
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
January 2006
Page 9 of 12
PM-RAR20005002 version 1
RAR20005002 Product Manual – 5 GHz WLAN Radio Module with Antenna Switch Module
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
Manufacturer’s Industry Canada Conformity Statement
This device has been designed to operate with an antenna having a maximum
gain of 15 dBi. Antenna having a higher gain is strictly prohibited per
regulations of Industry Canada. The required antenna impedance is 50 ohms.
Operation is subject to the following two conditions: (1) this device may not
cause interference, and (2) this device must accept any interference, including
interference that may cause undesired operation of the device.
To reduce potential radio interference to other users, the antenna type and its
gain should be so chosen that the equivalent isotropically radiated power
(EIRP) is not more than that required for successful communication.
This Class B Digital apparatus meets all the requirements of the Canadian
Interference-Causing Equipment Regulations.
RF Exposure Statement
This Wireless LAN radio device has been evaluated under FCC Bulletin OET
65C and found to be compliant to the requirements set forth in CFR 47
addressing applicable RF exposure from radio frequency devices.
This device complies with FCC RF radiation exposure limits for an
uncontrolled environment. The radiated output power of this Wireless LAN
device is below the FCC radio frequency exposure limits. However, this
device should still be installed and used in such a manner that the potential for
human contact during normal operation is minimized. In order to comply with
RF exposure limits established in the ANSI C95.1 standard, this equipment
January 2006
Page 10 of 12
PM-RAR20005002 version 1
RAR20005002 Product Manual – 5 GHz WLAN Radio Module with Antenna Switch Module
should be installed and operated at a minimum distance between the radiator
and a human body as follows:
•
25 cm (9.8 inches) for operation in the 5.15 – 5.35 GHz band.
•
33 cm (13 inches) for operation in the 5.725 – 5.850 GHz band.
January 2006
Page 11 of 12
PM-RAR20005002 version 1
RAR20005002 Product Manual – 5 GHz WLAN Radio Module
BelAir Networks U.S. East
11921 Freedom Drive
Suite 550
Reston, VA
USA
20190
BelAir Networks U.S. West
1902 Wright Place
Suite 200
Carlsbad, CA
USA
92008
BelAir Networks Inc.
603 March Road
Kanata, Ontario
Canada
K2K 2M5
703-736-8306
760-918-5544
613-254-7070
January 2006
Sales
sales@belairnetworks.com
Support
support@belairnetworks.com
General Information
Info@belairnetworks.com
Page 12 of 12
PM-RAR20005002 version 1

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Page Count                      : 12
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:2a19a3c2-3db7-4f3c-b9a5-79d2f6fbe569
Producer                        : Acrobat Distiller 6.0 (Windows)
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2006:02:13 14:41:22-05:00
Create Date                     : 2006:02:13 14:41:22-05:00
Document ID                     : uuid:6b036277-314d-4d4d-b6b0-7f1131e4363f
Format                          : application/pdf
Title                           : Microsoft Word - PM-B2CC001AA-E_Manual.doc
Creator                         : cwilliams
Author                          : cwilliams

EXIF Metadata provided by EXIF.tools