Ericsson Wi Fi 20005003 WLAN Radio Module with Antenna Switch Module User Manual PM B2CC001AA E Manual
Ericsson Wi-Fi WLAN Radio Module with Antenna Switch Module PM B2CC001AA E Manual
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 683445 |
| Application ID | RCwvl7VxGDsIfL1rj8gVkg== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 9.17kB (114651 bits) |
| Date Submitted | 2006-07-19 00:00:00 |
| Date Available | 2006-07-19 00:00:00 |
| Creation Date | 2006-07-19 14:02:08 |
| Producing Software | Acrobat Distiller 5.0.5 (Windows) |
| Document Lastmod | 2006-07-19 14:02:08 |
| Document Title | Microsoft Word - PM-B2CC001AA-E_Manual.doc |
| Document Creator | PScript5.dll Version 5.2.2 |
| Document Author: | stsang |
FCC ID: RAR20005003 RAR20005003 Product Manual 5 GHz WLAN Module with Antenna Switch Module Document Date: Document Number: Document Version Number: Document Status: July 2006 PM-RAR20005003 Release © Copyright 2005 by BelAir Networks. All rights reserved.. Page 1 of 12 RAR20005003 Product Manual – 5 GHz WLAN Radio Module Contents About this Document ....................................................................... 2 Introduction...................................................................................... 3 Conditions of Use ............................................................................. 4 Module Installation and Service..................................................... 6 Final Product Requirements........................................................... 7 Regulatory Statements .................................................................... 9 About this Document This document is a product manual for the FCC ID: RAR20005003, 5 GHz WLAN Radio Module with Antenna Switch Module, including its limitations on use in any product marketed or offered for sale. It is intended as a supplement to training and documentation by BelAir Networks Inc. or its authorized agents. Page 2 of 12 RAR20005003 Product Manual – 5 GHz WLAN Radio Module Introduction The RAR20005003 (hereafter referred to as “the module”) is a 5 GHz radio module compatible with the IEEE 802.11 standard for Wireless LAN operation. It is designed to be interoperable with WLAN products which are based on Direct Sequence Spread Spectrum (DSSS) radio technology. The module contains a complete 802.11a radio and Medium Access Control (MAC) protocol engine which allows implementation of an 802.11a device. The module is not intended for stand-alone operation. It will only be marketed as a complete product, in conjunction with a package, DC power supply and antenna (hereafter referred to as “the product” or the “final product”). Since the module has a BelAir networks proprietary digital interface, it cannot be directly connected to any standard telecommunications or computer devices. It can only be used with final products designed and authorized specifically for that purpose. Page 3 of 12 RAR20005003 Product Manual – 5 GHz WLAN Radio Module Conditions of Use General Conditions of Use This manual is intended to supplement training provided by BelAir Networks or authorized parties. The module RAR20005003 is only intended for use in BelAir Networks products and is not for sale to the general public as a standalone module. Please read this entire document, including the Regulatory Statements section before attempting to install or operate the module. Warning: Any use of RAR20005003 in any manner which is not expressly specified within this manual or specifically approved by BelAir Networks or its authorized agents will void the user’s right to operate this module, and is expressly forbidden by BelAir Networks. This includes any modification of the module, installation of the module in a configuration or used with an antenna which is not expressly listed in this document or approved by BelAir Networks. List of Approved Final Products The RAR20005003 module is only approved for use in the following BelAir Networks products: • BelAir200. See product assembly instructions for complete details. Operation of the module within the products expressly listed above is required to ensure compliance to all FCC and Industry Canada regulations. Any modification of the module, or its use in any configuration not expressly listed above may void the user’s right to operate this module. Country of Use RAR20005003 is certified with limited modular approval for use in the United States as an Intentional Radiator as device: FCC ID: RAR20005003 and in Page 4 of 12 RAR20005003 Product Manual – 5 GHz WLAN Radio Module Canada as IC: 4674A-20005003. Please read all regulatory statements at the end of this document before any attempt to install or operate this module. The module is only certified for operation in the United States and Canada. Before attempting to install and operate this module in any other country, contact BelAir Networks for approval. Module Labeling One or more labels are applied to the module during manufacture, including a label which identifies the FCC and Industry Canada identification numbers. Do not attempt to remove any labels from the module. Page 5 of 12 RAR20005003 Product Manual – 5 GHz WLAN Radio Module Module Installation and Service Installation into a Product The module shall only be installed by a technician trained by BelAir Networks or its authorized agents. It should only be installed into an approved product (see above) following all manufacturing and service procedures for that product. The module should only be installed into a final product in a manufacturing or service depot site. Caution: RAR20005003 is an electro-static discharge (ESD) sensitive device. All appropriate ESD measures must be taken when handling the module. Failure to employ appropriate ESD protection may damage the module. Module Service The module is not intended as a field-serviceable unit. It contains no fieldreplaceable or field-serviceable parts, or any external adjustable mechanisms. The module should only be serviced in a manufacturing or service depot site approved by BelAir Networks or its authorized agents. Page 6 of 12 RAR20005003 Product Manual – 5 GHz WLAN Radio Module Final Product Requirements The requirements below apply to any final product in which the RAR20005003 module is installed. Antenna Usage RAR20005003 module shall only be used in conjunction with the following antenna types: • BelAir Networks model: BMA000203, 15 dBi directional antenna, horizontal beamwidth 45 degrees. • BelAir Networks model: BMA000221, 12.5 dBi directional antenna, horizontal beamwidth 45 degrees. • BelAir Networks model: BMA000210, 10 dBi directional antenna, horizontal beamwidth 65 degrees. Warning: Use of this module in conjunction with any antenna not expressly listed above may void authority to install or operate this equipment. Product Installation Products which contain RAR20005003 shall only be installed by professional installers trained by BelAir Networks or its authorized agents. In addition to normal installation procedures and good installation practice, professional installers are responsible to ensure that: 1. Only an approved antenna (see above) is connected to the module, 2. The antenna is mounted in such a manner and in such a location that access to the antenna by the general population is minimized. During normal operation, access to the antenna by the general population should be limited to greater than 25cm. 3. Only the approved BelAir Networks AC power cable (model BMC200003) may be used when this module is deployed with the BelAir200 product. Use of any other power cable may void the regulatory approvals of the BelAir200 and is prohibited. The BelAir-supplied power cable includes Page 7 of 12 RAR20005003 Product Manual – 5 GHz WLAN Radio Module emission suppression components as part of the cable assembly (Steward 28H5776-OA2, HFA187102-OA2, HFA259137-OB2, 28A2093-OA2). Adherence to these rules by the professional installer is mandatory. See full installation procedures for the particular product for details. Product Labeling The following permanent label, or one containing equivalent information, must be affixed in a conspicuous location on the exterior of every product containing this module: This device contains the following: FCC ID: RAR20005003 IC: 4674A-20005003 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Page 8 of 12 RAR20005003 Product Manual – 5 GHz WLAN Radio Module Regulatory Statements The following regulatory notes apply to the product which contains module FCC ID: RAR20005003. The following sections or equivalent information shall appear in the user-manual of the final product. Regulatory Information and Disclaimers Installation and use of this device must be in strict accordance with the instructions included in the user documentation provided with the product. Any changes or modifications to this product not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. The manufacturer is not responsible for any interference to radio or television equipment caused by unauthorized modification of this device, or attachment of any antennas or equipment other than those specified by the manufacturer. The manufacturer or its authorized resellers or distributors will assume no liability for any damage or violation of government regulations arising from failing to comply with these guidelines. Manufacturer’s FCC Conformity Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular Page 9 of 12 RAR20005003 Product Manual – 5 GHz WLAN Radio Module installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Manufacturer’s Industry Canada Conformity Statement This device has been designed to operate with an antenna having a maximum gain of 15 dBi. Antenna having a higher gain is strictly prohibited per regulations of Industry Canada. The required antenna impedance is 50 ohms. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (EIRP) is not more than that required for successful communication. This Class B Digital apparatus meets all the requirements of the Canadian Interference-Causing Equipment Regulations. RF Exposure Statement This Wireless LAN radio device has been evaluated under FCC Bulletin OET 65C and found to be compliant to the requirements set forth in CFR 47 addressing applicable RF exposure from radio frequency devices. This device complies with FCC RF radiation exposure limits for an uncontrolled environment. The radiated output power of this Wireless LAN device is below the FCC radio frequency exposure limits. However, this device should still be installed and used in such a manner that the potential for human contact during normal operation is minimized. In order to comply with RF Page 10 of 12 RAR20005003 Product Manual – 5 GHz WLAN Radio Module exposure limits established in the ANSI C95.1 standard, this equipment should be installed and operated at a minimum distance of 25cm. Page 11 of 12 RAR20005003 Product Manual – 5 GHz WLAN Radio Module BelAir Networks U.S. East 11921 Freedom Drive Suite 550 Reston, VA USA 20190 BelAir Networks U.S. West 1902 Wright Place Suite 200 Carlsbad, CA USA 92008 BelAir Networks Inc. 603 March Road Kanata, Ontario Canada K2K 2M5 703-736-8306 760-918-5544 613-254-7070 Sales sales@belairnetworks.com Support support@belairnetworks.com General Information Info@belairnetworks.com Page 12 of 12
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No Create Date : 2006:07:19 14:02:08-04:00 Modify Date : 2006:07:19 14:02:08-04:00 Page Count : 12 Creation Date : 2006:07:19 18:02:08Z Mod Date : 2006:07:19 18:02:08Z Producer : Acrobat Distiller 5.0.5 (Windows) Author : stsang Metadata Date : 2006:07:19 18:02:08Z Creator : stsang Title : Microsoft Word - PM-B2CC001AA-E_Manual.docEXIF Metadata provided by EXIF.tools