Ericsson Wi Fi 20021001 ERM1 4.9-5.9 GHz WLAN Radio Module User Manual RAR20021001 ERM1 Manual

Download:
Mirror Download [FCC.gov]
Document ID	935190
Application ID	S2HOFaPZF4rQKwmN9JO8CA==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	10.41kB (130075 bits)
Date Submitted	2008-04-30 00:00:00
Date Available	2008-05-01 00:00:00
Creation Date	2008-04-29 14:15:24
Producing Software	Acrobat Distiller 7.0.5 (Windows)
Document Lastmod	2008-04-29 14:15:24
Document Title	Microsoft Word - RAR20021001_ERM1_Manual.doc
Document Creator	PScript5.dll Version 5.2.2
Document Author:	rsmith

B2CH052AA
B2CH052AA Product Manual
ERM1 4.9-5.9 GHz WLAN Radio Module
Document Date:
Document Number :
Document Version Number :
Document Status:
April 22, 2008
PM-B2CH052AA
Release
© Copyright 2008 by BelAir Networks.
All rights reserved.
Page 1 of 14
B2CH052AA Product Manual
Page 2 of 14
B2CH052AA Product Manual
Contents
About this Document .................................................................... 3
Introduction .................................................................................... 4
Conditions of Use ........................................................................... 5
Module Installation and Service.................................................... 7
Final Product Requirements ......................................................... 8
Regulatory Statements ................................................................ 12
About this Document
This document is a product manual for the B2CH052AA 5 GHz WLAN Radio
Module, including its limitations on use in any product marketed or offered for sale.
It is intended as a supplement to training and documentation by BelAir Networks
Inc. or its authorized agents.
Page 3 of 14
B2CH052AA Product Manual
Introduction
The B2CH052AA (hereafter referred to as “the module”) is a 4.9 – 5.9 GHz radio
module compatible with the IEEE 802.11 standard for Wireless LAN operation. It
is designed to be interoperable with WLAN products which are based on Direct
Sequence Spread Spectrum (DSSS) radio technology.
The module contains a complete 802.11a radio and Medium Access Control (MAC)
protocol engine which allows implementation of an 802.11a module.
The module is not intended for stand-alone operation. It will only be marketed as a
complete product, in conjunction with a package, DC power supply and antenna
(hereafter referred to as “the product” or the “final product”).
The module can be used in both the licensed 4.9 GHz public safety band and the 5
GHz unlicensed bands.
Since the module has a BelAir networks proprietary digital interface, it cannot be
directly connected to any standard telecommunications or computer devices. It can
only be used with final products designed and authorized specifically for that
purpose.
Page 4 of 14
B2CH052AA Product Manual
Conditions of Use
General Conditions of Use
This manual is intended to supplement training provided by BelAir Networks or
authorized parties. The module B2CH052AA is only intended for use in BelAir
Networks products and is not for sale to the general public as a stand-alone module.
Please read this entire document, including the Regulatory Statements section
before attempting to install or operate the module.
Warning:
Any use of B2CH052AA in any manner which is not expressly
specified within this manual or specifically approved by BelAir Networks or its
authorized agents will void the user’s right to operate this module, and is expressly
forbidden by BelAir Networks. This includes any modification of the module,
installation of the module in a configuration or used with an antenna which is not
expressly listed in this document or approved by BelAir Networks.
List of Approved Final Products
The B2CH052AA module is only approved for use in the following BelAir Networks
products:
•
BelAir200. See BelAir200 documentation for complete manufacturing instructions.
•
BelAir100. See BelAir100 documentation for complete manufacturing instructions.
•
BelAir50c. See BelAir50c documentation for complete manufacturing instructions.
Operation of the module within the products expressly listed above is required to
ensure compliance to all FCC and Industry Canada regulations. Any modification of
the module, or its use in any configuration not expressly listed above may void the
user’s right to operate this module.
Country of Use
B2CH052AA is certified with limited modular approval for use as an Intentional
Radiator in the United States as device: FCC ID: RAR20021001 and in Canada as
Page 5 of 14
B2CH052AA Product Manual
IC: 4674A-20021001. Please read all regulatory statements at the end of this
document before any attempt to install or operate this module.
The module is only certified for operation in the United States and Canada. Before
attempting to install and operate this module in any other country, contact BelAir
Networks for approval.
Module Labeling
One or more labels are applied to the module during manufacture, including a label
which identifies the FCC and Industry Canada identification numbers. Do not
attempt to remove any labels from the module.
Page 6 of 14
B2CH052AA Product Manual
Module Installation and Service
Installation into a Product
The module shall only be installed by a technician trained by BelAir Networks or its
authorized agents. It should only be installed into an approved product (see above)
following all manufacturing and service procedures for that product. The module
should only be installed into a final product in a manufacturing or service depot site.
Caution: B2CH052AA is an electro-static discharge (ESD) sensitive device. All
appropriate ESD measures must be taken when handling the module. Failure to
employ appropriate ESD protection may damage the module.
Module Service
The module is not intended as a field-serviceable unit. It contains no fieldreplaceable or field-serviceable parts, or any external adjustable mechanisms. The
module should only be serviced in a manufacturing or service depot site approved
by BelAir Networks or its authorized agents.
Page 7 of 14
B2CH052AA Product Manual
Final Product Requirements
The requirements below apply to any final product in which the B2CH052AA module is installed.
Antenna Usage and Module Transmit Power
B2CH052AA module shall only be used at the following output power levels in
conjunction with the following antenna types as outlined in the tables that follow:
4.9 GHz – Part 90
For operation in the 4.94 – 4.99 GHz band, the B2CH052AA may be set to operate
on 5, 10, or 20 MHz channel bandwidths.
Channel Bandwidth
5 MHz
10 MHz
20 MHz
Channels
4945 - 4985, 5 MHz steps
4945 - 4985, 5 MHz steps
4950 - 4980, 5 MHz steps
Maximum Transmit Power
22 dBm
22 dBm
21 dBm
Page 8 of 14
B2CH052AA Product Manual
4.9 GHz Omni Antennas:
MTI MT-462008-N-A; 10dBi (direct connect omni antenna) (450mm tall);
MTI MT-462008-N; 10dBi (cable connected omni antenna) (450mm tall);
MTI MT-462007-N-A; 7dBi (direct connect omni antenna) (330mm tall);
MTI MT-462007-N; 7dBi (cable connected omni) (330mm tall);
MTI MT-462002/N; 9 dBi (cable connected Omni) (450mm tall)
MAXRAD MFB49009; 9 dBi (cable connected Omni antenna) (512mm tall)
MAXRAD BMEFC49005; 5.5 dBi Elevated Feed antenna
MAXRAD MH05158010NM; 10 dBi Omni Antenna
Mobile Mark ECOM6-4900; 6 dBi Magnetic Mount Antenna
Mobile Mark ECOM6-4900; 9 dBi Magnetic Mount Antenna
Mobile Mark ECOM6-4900-TEF; 6 dBi Elevated feed Magnetic Mount Antenna
Mobile Mark ECOT6-4900PT; 6 dBi Mount Antenna
Mobile Mark ECOT6-4900PT; 9 dBi Mount Antenna
Mobile Mark RM3-4900; 3 dBi Omni Antenna
Mobile Mark DM2-4900; 3 dBi Omni Antenna
Mobile Mark SCR14-4900; 14 dBi Corner Reflector Antenna
Laird Phantom Antenna; 3 dBi Omni Antenna.
High Gain Directional Antennas:
MTI MT-465005/N; 21 dBi high gain directional (1 foot panel)
MTI MT-466004/N; 25 dBi high gain directional (1.5 foot panel)
Sector Antennas:
MTI MT-464002/NV; 16 dBi 60 degree sector (V)
MTI MT-464003/NV; 15.5 dBi 90 degree sector (V)
MTI MT-444003/NV; 15 dBi 120 degree sector (V)
Mobile Mark PN16-4900-120; 16 dBi 120 degree sector
Mobile Mark PN17-4900-90; 17 dBi 90 degree sector
Mobile Mark PN22-4900-30; 22 dBi 30 degree sector
5.8 GHz – Part 15
For operation in the 5.725 – 5.850 GHz band, the B2CH052AA may be set to
operate on 5, 10, 20, or 40 MHz channel bandwidths.
Page 9 of 14
B2CH052AA Product Manual
In order to comply with the FCC and Industry Canada rules in the USA and Canada,
respectively, it is required to respect the maximum transmit power limits as follows
for each of the antenna types as indicated in the Table: Maximum Conducted
Output Power.
* P2P indicates that the rated transmit power is only permissible for use in point-topoint links. For point-to-multipoint or multipoint-to-multipoint links the power
must be reduced as shown.
Warning:
Use of this module in conjunction with any antenna not expressly
listed above will void authority to install or operate this equipment.
Warning:
Setting of module transmit power above the limits specified in the
above table for a particular combination of antenna type, frequency of operation,
and type of usage, will exceed FCC or Industry Canada limits and void authority to
install or operate this equipment.
Page 10 of 14
B2CH052AA Product Manual
Product Installation
Products which contain B2CH052AA-A shall only be installed by professional installers
trained by BelAir Networks or its authorized agents. This product is to be installed on
fixed permanent structures. In addition to normal installation procedures and good
installation practice, professional installers are responsible to ensure that:
1. Only an approved antenna (see above) is connected to the module, and,
2. The antenna is mounted in such a manner and in such a location that access to the
antenna by the general population is minimized. Access to the antenna by the general
population should be limited to more than the minimum safety distance. This distances
are outlined according to product type and whether high gain antennas are used:
Adherence to these rules by the professional installer is mandatory. See full installation
procedures for the particular product for details.
Product Labeling
The following permanent label, or one containing equivalent information, must be
affixed in a conspicuous location on the exterior of every product containing this
module:
FCC ID: RAR20021001
IC: 4674A-20021001
Page 11 of 14
B2CH052AA Product Manual
Regulatory Statements
The following regulatory notes apply to the product which contains module
B2CH052AA. The following sections or equivalent information shall appear in the
user-manual of the final product.
Regulatory Information and Disclaimers
Installation and use of this device must be in strict accordance with the instructions
included in the user documentation provided with the product. Any changes or
modifications to this product not expressly approved by the party responsible for
compliance could void the user’s authority to operate this equipment.
The manufacturer is not responsible for any interference to radio or television
equipment caused by unauthorized modification of this device, or attachment of any
antennas or equipment other than those specified by the manufacturer. The
manufacturer or its authorized resellers or distributors will assume no liability for
any damage or violation of government regulations arising from failing to comply
with these guidelines.
Manufacturer’s FCC Conformity Statement
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions (1) this device may not cause
harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
FCC Interference Statement
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 and Part 90 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
Page 12 of 14
B2CH052AA Product Manual
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Manufacturer’s Industry Canada Conformity Statement
This device has been designed to operate with an antenna having a maximum gain of
23 dBi. Antenna having a higher gain is strictly prohibited per regulations of Industry
Canada. The required antenna impedance is 50 ohms.
This device has been designed to ensured that radio frequency emissions are
maintained within the band of operation under all normal operating conditions listed
in this manual.
Operation is subject to the following two conditions: (1) this device may not cause
interference, and (2) this device must accept any interference, including interference
that may cause undesired operation of the device.
To reduce potential radio interference to other users, the antenna type and its gain
should be so chosen that the equivalent isotropically radiated power (EIRP) is not
more than that required for successful communication.
This Class B Digital apparatus meets all the requirements of the Canadian
Interference-Causing Equipment Regulations.
Page 13 of 14
B2CH052AA Product Manual
RF Exposure Statement
This Wireless LAN radio device has been evaluated under FCC Bulletin OET 65C and found to
be compliant to the requirements set forth in CFR 47 Sections 2.1091, 2.1093, and 15.247 (b)
(4) addressing RF exposure from radio frequency devices.
This Wireless LAN radio device has been evaluated under FCC Bulletin OET 65C and found to
be compliant to the requirements set forth in CFR 47 90.1335 and Sections 2.1091, 2.1093,
addressing RF exposure from radio frequency devices.
This device complies with FCC RF radiation exposure limits for an uncontrolled environment.
The radiated output power of this Wireless LAN device is below the FCC radio frequency
exposure limits. However, this device should still be installed and used in such a manner that
the potential for human contact during normal operation is minimized. In order to comply with
RF exposure limits established in the ANSI C95.1 standard, this equipment should be installed
and operated at a minimum distance between the radiator and a human body. This minimum
distance is:
BelAir Networks Inc.
603 March Road
Kanata, Ontario
Canada
K2K 2M5
613-254-7070
Sales
sales@belairnetworks.com
Support
support@belairnetworks.com
General Information
Info@belairnetworks.com
Page 14 of 14

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0.5 (Windows)
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2008:04:29 14:15:24-04:00
Create Date                     : 2008:04:29 14:15:24-04:00
Format                          : application/pdf
Title                           : Microsoft Word - RAR20021001_ERM1_Manual.doc
Creator                         : rsmith
Document ID                     : uuid:4498b09a-e497-4f3c-9a60-a261e88ef783
Instance ID                     : uuid:4ce795e6-fa6f-46c8-9384-1c474403074a
Page Count                      : 14
Author                          : rsmith

EXIF Metadata provided by EXIF.tools