Escort orporated S4 Cordless Long Range Radar Laser Detector User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3305295
Application ID	4Udwe/xKoU8l9ZNswn5tOw==
Document Description	User Manual.pdf
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	40.46kB (505788 bits)
Date Submitted	2017-03-06 00:00:00
Date Available	2017-05-18 00:00:00
Creation Date	2017-01-25 09:23:44
Producing Software	Adobe PDF Library 15.0
Document Lastmod	2017-01-26 08:21:45
Document Title	User Manual.pdf
Document Creator	Adobe InDesign CC 2015 (Macintosh)

EZ-Programming
Settings & Preferences
To quickly reset SOLO S4 to the factory
program settings, press and hold the Mute
and SEN buttons while turning SOLO S4 on.
Example of EZ-Programming
Here is how you would turn SOLO S4’s
AutoMute feature off.
How to use EZ-Programming
1 To enter Program Mode, press and hold
both PGM buttons for 2 seconds. The unit
will beep twice, and will display the word
Program.
1 Enter the Program Mode by holding one
of the VOL buttons and SEN button down
for 2 seconds. SOLO S4 will beep twice and
display Program.
2 Then hold the RVW button down. SOLO S4
will scroll through the categories, starting
with Pilot options, Auto-Power, Power-On
sequence, Signal Strength Meter, AutoMute,
Tones, City sensitivity, Brightness, and Bands.
2 Then press either RVW button to review
the current settings. You can either tap the
button to change from item to item, or press
and hold the button to scroll through the
items.
3 Release the RVW button when SOLO S4
shows the AutoMute item. Since the
factory setting is for AutoMute to be on,
SOLO S4 will display aMuteON. (If you
accidentally go to the next category, press
the opposite “VOL” button to go back.)
3 Press the CHG button to change any
setting. You can either tap the button to
change from setting to setting, or hold the
button to scroll through all the options.
4 To leave the Program Mode, simply wait 8
seconds without pressing any button. The
unit will display Complete, beep 4 times,
and return to normal operation.
4 Press the CHG button to change from
aMuteON to aMuteOFF.
5 To complete the Programming, simply
wait 8 seconds without pressing any
button. SOLO S4 will display Complete,
beep 4 times, and return to normal
operation.
Press the RVW button to go 				 Press the CHG button to change
from one category to the next				 your setting within a category
Pilot HWY
* Full word: Highway or Auto or City
Pilot H
Letter: H or A or C
Pilot H.>
Letter, with scanning dot
Pilot +
Symbol: + or • or –
Pilot +.>
Symbol, with scanning dot
Pilot +>
Scanning symbol
Auto Power
aPwr Motn
* Uses motion to turn SOLO S4 off
aPwr Time
Uses time to turn SOLO S4 off
aPwr Off
Turn SOLO S4 on and off manually
PwrOn STD
* Standard power-on sequence
Power-On Sequence
PwrOn FST
Fast power-on sequence
Meter STD
* Standard signal strength meter
Signal Strength Meter
Meter EXP
Expert Meter
aMute ON
* AutoMute on
AutoMute
aMute OFF
AutoMute off
Tone STD
* Standard tones
AudioTones
Tone LOUD
Loud tones
City STD
* Standard City mode sensitivity
City Mode Sensitivity
City LoX
Low X-band sensitivity in City Mode
City NoX
No X-band sensitivity in City Mode
Brt AUTO
* Brightness is controlled automatically
Brightness
Brt MIN
Minimum brightness when turned on
Brt MED
Medium brightness when turned on
Brt MAX
Maximum brightness when turned on
Brt DARK
Full Dark Mode when turned on
Bands DFT
* Def ault bands selected
Bands
Bands MOD
One or more bands are disabled
Pilot Light
(Options using
12-volt SmartCord)
			 	
*Default Setting
Contact Us
Ka
LSR
SWS
VG2
ON or OFF
ON or OFF
ON or OFF
ON or OFF
ON or OFF
ON or OFF
Turn bands “ON” or “OFF” by
pressing the Mute button
* X-band detection on
* K-band detection on
* Ka-band detection on
* Laser detection on
* SWS detection off
* VG2 detection off
Notes for Settings & Preferences
For descriptions and details of features and
functions visit EscortRadar.com to view and
download the complete SOLO S4 Owner’s
Manual.
Quick Reference
Registration
Register now to enter your new SOLO S4
for our product warranty and qualify for
special offers at EscortRadar.com
Restoring the Factory Default Settings:
To reset SOLO S4 to its original factory
settings, press and hold the Mute and M
(Mode) buttons while turning SOLO S4 on.
SOLO S4’s display will provide a Reset
message, accompanied by an audible alert,
acknowledging the reset.
Long Range Protection + Cordless Convenience
SOLO S4 Info & Accessories
800.433.3487
EscortRadar.com
Service Procedure
If your SOLO S4 ever needs service, call us at
1-800-543-1608. We may be able to solve
your problem over the phone. If the problem
requires that you send your SOLO S4 to the
factory for repair, we will provide you with a
Service Order Number, which must be
included on the outside of your shipping box.
ESCORT Inc.
5440 West Chester Road
West Chester OH 45069
Sales/Service 800.433.3487
www.EscortRadar.com
©2017 ESCORT Inc. ESCORT®, PASSPORT®, SOLO®, AFR®,
SmartShield®, AutoSensitivity™, MuteDisplay™, and
ExpertMeter™ are trademarks of ESCORT Inc. SWS is a
trademark of SWS, L.C.
Features, specifications and prices subject to change
without notice.
Designed in the USA by Escort, Inc., manufactured in the
Philippines.
FCC NOTE: Modifications not expressly approved by the
manufacturer could void the user’s FCC granted
authority to operate the equipment.
FCC ID: QKLS4
This device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) this
device must accept any interference received including
interference that may cause undesired operation.
Enclose the following information with your
SOLO S4 and power cord:
• Your Service Order Number
• Your name and return address
• Your daytime telephone number
• A description of the problem you
are experiencing
Cordless Long Range
Radar Laser Detector
Cordless Convenience
Long Range Radar/Laser Detection
OLED
OLED Display
•
•
•
Open ➜
Congratulations
SOLO S4 Features
Co
The SOLO S4 introduces a new level of
revolutionary cordless performance
and innovative features:
ess
dl
• Long-range cordless
performance for both
radar and laser
Your new
SOLO S4 is
the most advanced cordless radar, laser and
safety detector available.
• AutoPower feature maximizes 		
battery life
• Brilliant high-resolution OLED 		
display
The SOLO S4 includes full X, K, SuperWide Ka,
and Safety Warning System radar capability,
front and rear laser detection, digital signal
processing (DSP) for superior range and
reduced false alarms, our patented Mute and
AutoMute, audible and visual band alerts,
and all the performance you’d expect from
ESCORT.
• Advanced EZ-Programming lets you
customize up to 9 features
• Exclusive AutoSensitivity mode
virtually eliminates false alarms, plus 		
Highway and City settings
Go to EscortRadar.com/manuals for full
featured owner’s manual.
Installation
Controls & Features
Windshield Mount
SOLO S4’s EasyMount windshield bracket is
designed for unobtrusive and hassle-free
mounting.
1 Depress the adjustment button on the top
of SOLO S4 (above the word “RELEASE”) and
slide the EasyMount bracket into the slot
until mount is locked into the position which
best fits the angle of your windshield (there
are four settings available). For extremely
horizontal or extremely sloped windshields,
the EasyMount bracket can be bent.
SOLO S4 Mounting Location
WARNING: ESCORT cannot anticipate the
many ways SOLO S4 can be mounted. It is
important that you mount SOLO S4 where it
will not impair your view nor present a
hazard in case of an accident.
For optimum detection performance, we
recommend the following:
• Using the supplied Windshield Mount, stick
the suction cups to the windshield, and
mount your SOLO S4 level and high enough
on your front windshield to provide a clear
view of the road ahead.
• Detects and displays up to 64 Safety
Warning System messages
EasyRelease Button
Press the release button, and slide the
Windshield mount into one of its four locking
positions.
12-volt Power Jack
For 12-volt operation, plug the optional
SmartCord into this connector.
Radar Antenna and Laser Lens
The rear panel of your SOLO S4 should have a
clear view of the road ahead. For best
performance, do not mount SOLO S4
directly behind windshield wipers
or tinted areas.
Mute / Battery Status Button
Briefly press this button (located on top) to
silence the audio for a specific alert.
Ear Phone Jack
A standard 1/8 inch (or 3.5 mm) earphone
jack is located on the right front side of the
SOLO S4.
Rear Laser Port
Receives laser signals from behind the vehicle.
To ensure that the suction cups adhere to the
windshield firmly, be sure to keep both your
windshield and the suction cups clean.
• ExpertMeter tracks and displays up to
8 radar signals simultaneously
Please drive safely.
EasyMount Slot
Insert SOLO S4’s adjustable Windshield
mount into this slot.
Battery Installation
Remove the battery door, located on the
bottom of the detector, and install (2) AA
batteries (supplied). Be sure to note the
correct polarity for each battery
(See legends inside battery compartment).
• Mount SOLO S4 away from windshield
wipers, other solid objects, and heavily
tinted areas that might obstruct the radar
antenna or laser lens.
2 To adjust SOLO S4 on your windshield, use
the EasyMount adjustment button located
on the top of the SOLO S4, and slide SOLO S4
forward or backward to obtain a level
horizontal position.
When installed and adjusted properly, the
back top edge of the SOLO S4 should rest
solidly against your windshield.
User’s Tip: You can leave the EasyMount
bracket in place on your windshield, and
easily remove SOLO S4 by pressing the
adjustment button and sliding SOLO S4 off
the mount. Again, be sure to position the
bracket where it won't present a hazard in
the event of an accident. Additional mounts
are available at EscortRadar.com.
Optional 12-volt SmartCord
To power SOLO S4 using 12-volts, simply
remove the power connector plug, and
insert the small end of the optional
SmartCord, (telephone-type connector) into
the modular jack on SOLO S4’s right side.
Plug the lighter plug adapter into your
vehicle’s lighter socket or accessory socket.
The SmartCord allows you to operate the
SOLO S4 on 12 volts DC negative ground only.
The lighter plug is a standard size and will
work in most vehicles. Of course,
your lighter socket must be clean
and properly connected for proper
operation.
NOTE: Depending on your vehicle the power
socket may either be continuously on, or it may
be switched on and off with your ignition switch.
Power-On Indication
Three LED's (green, yellow, red) mounted
between the PWR button and the display,
indicate power (blinking in battery mode,
solid when optional 12-volt power cord is
used). These also indicate the sensitivity
mode that the unit is in,( "H" for highway, "A"
for AutoSensitivity, and "C" for city).
PWR
Press the PWR button to turn SOLO S4 on.
Press and hold the PWR button to turn SOLO
S4 off.
AutoPwr Feature
The SOLO S4 will automatically shut off
once the vehicle has
stopped moving for
approximately
25 minutes.
SEN Button
Switches sensitivity between Highway,
AutoSensitivity, and City settings. In general,
we recommend the AutoSensitivity mode.
Volume Control
Press the up or down button to adjust the
volume.
Graphic OLED Display
During an alert, the display will turn on and
indicate radar band, and a precise bar-graph
of signal strength. Programming options and
SWS messages are also displayed.
NOTE: When using SOLO S4 in battery mode,
the display will turn off automatically until a
signal is detected, or you enter program mode.
This maximizes battery life. When using the
optional 12-volt SmartCord, the display will
remain on and provide several pilot options for
power-on indication.
EZ-Programming
SOLO S4 is ready to go, just plug it in and
turn it on. If you prefer, you can also easily
customize up to 9 features for your specific
driving preferences.
AutoMute
SOLO S4’s patented AutoMute automatically
reduces the volume level of the audio alert
after a brief period.
If you prefer, you can turn AutoMute off.
Continued ➜

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Create Date                     : 2017:01:25 09:23:44-06:00
Creator                         : Adobe InDesign CC 2015 (Macintosh)
Modify Date                     : 2017:01:26 08:21:45-05:00
XMP Toolkit                     : Adobe XMP Core 5.6-c015 84.159810, 2016/09/10-02:41:30
Metadata Date                   : 2017:01:26 08:21:45-05:00
Creator Tool                    : Adobe InDesign CC 2015 (Macintosh)
Instance ID                     : uuid:04ffa81b-4b5b-4cf6-b606-9d6922d96674
Original Document ID            : adobe:docid:indd:0b06ea0b-edcb-11e3-828b-be323f761f47
Document ID                     : xmp.id:1bea69b4-858b-4b87-a905-7335a2355c9e
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:9df6e135-0b4f-4cd5-b6a5-ebe9476ca3ad
Derived From Document ID        : adobe:docid:indd:0b06ea0b-edcb-11e3-828b-be323f761f47
Derived From Original Document ID: adobe:docid:indd:0b06ea0b-edcb-11e3-828b-be323f761f47
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CC 2015 (Macintosh)
History Changed                 : /
History When                    : 2017:01:25 09:23:44-06:00
Format                          : application/pdf
Producer                        : Adobe PDF Library 15.0
Trapped                         : False
Page Count                      : 2

EXIF Metadata provided by EXIF.tools