Eski BRO1 Bluetooth transmitter that controls luminous objects wirelessly from dMX signals User Manual

Eski Inc. Bluetooth transmitter that controls luminous objects wirelessly from dMX signals Users Manual

Users Manual

Version 1.4 2015-08-25INSTALLATION MANUAL
TABLE OF CONTENTS
1. PixMob Broadcaster2. Materials needed3. Installation 4. Broadcaster menu 5. Troubleshooting 6. Broadcaster characteristics p. 4p. 6p. 8 p. 10p. 14p. 15
1. Color indicator2. Control buttons3. Outgoing RF indicator light4. DMX signal indicator light5. Ethernet indicator light6. On / O indicator lightA Broadcaster is a Bluetooth trans-mitter that controls PixMob luminous objects wirelessly. Similarly to a LED flood light it is controllable by a lighting board through DMX. 1. PixMob BroadcasterPixMob Broadcaster4123456
6. DMX XLR5 IN7. DMX XLR5 OUT8. Ethernet (not activated)9. Powercon IN (110V - 220V AC)10. Powercon OUT (110V - 220V AC)11. AntennaPixMob Broadcaster511 106 7 8 9
1. PixMob Broadcaster2. Antenna3. DMX XLR5 cable4. Power cable (Powercon)With light console2. Material neededMaterial needed612
1. Plug DMX IN (female) at Broadcaster.2. Plug DMX OUT (male) at console. 3. Install fixture in console (pc).Connecting the BroadcasterMaterial needed7CONSOLE BROADCASTERDMXExamples for connecting the Broadcaster.43
Installation83. InstallationThis picture shows the dierent connections of the Broadcaster. Broadcasters can also be connected in daisy-chain by connecting DMX OUT to DMX IN of the next Broadcaster and AC OUT to AC IN of the next Broadcaster.Installing the Broadcaster

Navigation menu