Essence Security ES700EP Panic button (emergency pendant) User Manual 1

Download:
Mirror Download [FCC.gov]
Document ID	2025264
Application ID	tXzBRl2cQQEJTckWOt32cA==
Document Description	User_manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	42.78kB (534698 bits)
Date Submitted	2013-07-25 00:00:00
Date Available	2013-07-29 00:00:00
Creation Date	2013-07-18 13:57:40
Producing Software	Microsoft® Office PowerPoint® 2007
Document Lastmod	2013-07-23 09:21:47
Document Title	Slide 1
Document Creator	Microsoft® Office PowerPoint® 2007
Document Author:	danbl

part of the Essence Group
Panic Button
(ES700EP)
S.O.S. Button for Personal Emergency
Response System (PERS)
 Compact, user-friendly and modernly designed S.O.S. Button for Personal Emergency Response
System (PERS)
 Portable & can be carried with various adaptors: as pendant, key-ring or watch strap
 Sends panic message to central monitoring station for further action
 100% water sealed, with an internal battery for more than 7 years life cycle
 Suitable for various audiences in need of 24/7 monitoring
The ES700EP panic button and tag
seamlessly integrates with the
EverGuard and EverGuard Express
control panels and other products
from Essence Security International
With millions of systems and security peripherals installed internationally, Essence
Security is a technological and market leader in the field of advanced security
solutions for homes, offices and full-service central monitoring stations
POWER CONSUMPTION
• Long operation period (over 7 years)
• Uses one CR2025 Lithium Battery
SIZE & WEIGHT
• Size:
• H-14.5mm/ L-53.2mm/ W-31.5mm
• Weight:
• 16 gr. (including battery) without the various
accessories
ES700EP Panic Button
DESCRIPTION
• When the panic button is pressed, a message is
immediately sent to the Central Monitoring
Station (CMS).
• Central Service response can be configured to
various parameters and corresponding actions.
• Multiple wearing options – as a pendant, on a
wrist band or with a key ring.
RANGE & FREQUENCY
• Up to 400 meters RF range (open air)
• ECOP HW and SW bi-directional radio
• Modulation and Frequency: BFSK , 868.3 MHz
(Europe) 916.5MHz (US).
This device complies with FCC Rules Part 15 and with Industry Canada license-exempt
RSS standard(s). Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may
cause undesired operation
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux
appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions
suivantes:
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si
le brouillage est susceptible d'en compromettre le fonctionnement.
ENVIRONMENTAL
• Operating Ambient Temperature range
• -10° - 55° Celsius
• Water Immersion Resistant (IP67)
COMPLIANCE
• CE: EMC/EMI, ETSI EN 301 489-4,
ETSI EN 301 489-1, EN 50130-4
• Radio: ETSI EN 300 220-3, ETSI EN 300 220-1,
EN 50130-4
• Safety: EN/IEC 60950-1
• Security & Alarm systems: EN 50131-5-3
• Environmental Regulation: RoHS 2002/95/EC
• Reliability (Mechanical & Environmental
conditions): EN 50130-5 and IEC 60068
• Material: Polycarbonate
Certifications and approvals:
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications to this equipment not expressly approved by the party responsible for
compliance (Essence Ltd.) could void the user’s authority to operate the equipment.
Essence Security International (E.S.I.) Ltd.
www.essence-grp.com +972-73-244-7777 info@essence-grp.com
© 2013 Essence Security International (E.S.I.) Ltd. Information contained within this document may change without notice.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : danbl
Create Date                     : 2013:07:18 13:57:40+03:00
Modify Date                     : 2013:07:23 09:21:47+03:00
Language                        : en-US
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Format                          : application/pdf
Creator                         : danbl
Title                           : Slide 1
Creator Tool                    : Microsoft® Office PowerPoint® 2007
Metadata Date                   : 2013:07:23 09:21:47+03:00
Producer                        : Microsoft® Office PowerPoint® 2007
Document ID                     : uuid:ebaf0e52-c7a6-40f6-b56a-a826f6937de6
Instance ID                     : uuid:63066fc4-2a21-4ded-a3ba-513565441e06
Page Count                      : 2

EXIF Metadata provided by EXIF.tools