Essence Security ES700ISN-E RF Siren User Manual
Essence Security International ltd. RF Siren
User manual
Smart Security
Smart Security systems provide professional grade security with
highly dependable and tailored smart solutions that will increase
customer loyalty and satisfaction.
•
Modular and expandable
•
Lifestyle friendly
•
Reliable and high quality
•
Home control via mobile applications
•
Intuitive experience
Specifications
ESUGSS006 Rev. 1.2
An indoor, bi-directional, battery-operated RF siren, featuring:
•
05 dBA sound output at 1 meter
•
RF range of up to 700 meters
•
More than 3 years of operation using four AA batteries
•
Adjustable volume level
•
Elegant, high-end design
•
2 orange LED strobes
EverGuard™
Indoor Siren
ES700ISN
Indoor, Bi-Directional, RF Siren
© 2016 Essence Security Ltd. Information contained within this document may change without notice
Product
WIRELESS
Bi-directional: ECOP - Essence proprietary communication protocol
Maximum RF Range: Up to 700 meters (2296 feet) – open air
Advanced radio supervision algorithm
Modulation and Frequency: BFSK , 868.3 MHz (Europe) or 916.5 MHz (US)
Encoding: 32-bit ID, over 4 billion combinations
SECURITY
Tamper mechanism
Unique electronic serial number
POWER
Batteries: 4x1.5V AA Alkaline or Lithium (non-rechargeable batteries) Energizer
brand is recommended - see operation temperatures below.
Battery life: 3 years without external power source
DIMENSIONS
Size: L – 120mm (4.72 in.), W – 120mm (4.72 in.), H – 40mm (1.57 in.)
Weight: (battery not included) – 150g (0.33 lbs.)
ENVIRONMENT
Operating ambient temperature range:
Energizer E91 or X91 (Zn/MnO2) for 0° ~ 55° Celsius (32ºF – 131ºF)
Energizer L91 (Li/FeS2) for -10° ~ 55° Celsius (14ºF – 131ºF)
Operating humidity: Up to 95% non-condensing
CERTIFICATION
EN, CE, FCC, ISO
For more information, go to: http://www.essence-grp.com/smart-security
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications to this equipment not expressly approved by the party
responsible for compliance (Essence Security International Ltd.) could void the
user’s authority to operate the equipment.
This device complies with FCC Rules Part 15. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference
that may cause undesired operation