Essence Security ES700JD Jamming Detector User Manual

Essence Security International ltd. Jamming Detector

User manual

COMMUNICATIONS • Maximum RF Range: Up to 700 m (2290 ft.) - open air • Protocols: Bi-Directional ESI protocol • Frequency and Modulation: BFSK Modulation • 868.3 MHz in Europe • 916.5 MHz in USA and South America SECURITY & SAFETY • Unique electronic serial number • Supports automatic over–the–air software programming and configuration upgrade (RSU) POWER SUPPLY • External 5Vdc AC/DC converter DIMENSIONS • Size: L – 141 mm (5.55 in.), W – 74.8 mm (2.94 in.), H – 40.8 mm (1.6 in.) ENVIRONMENT • Storage Ambient Temperature range: -20° - +60°C (-4° - +140°F) • Operating Ambient Temperature range: -10ºC - +55ºC (+14ºF - +131ºF) • Humidity: Up to 95% non-condensing CERTIFICATION • CE “Plug-&-Play” state-of-the-art Wireless security system: • User-friendly • Utilizes cutting-edge technology • Bidirectional RF wireless communication • Easy to install • Nonintrusive, state-of-the-art design Smart Security For more information, go to: http://www.essence-grp.com/smart-security Specifications ES700JDVSF Rev 1.2 Verisure Fast-II Jamming Detector ES700JD Jamming Detector and Backup Communication Channel Device © 2016 Essence Security International (E.S.I.) Ltd. Information contained within this document may change without notice Product The simplest and most user-friendly RF jamming detector, with a backup communication channel mechanism. Features include: • Sophisticated RF-jammer detector that protects communications between the control panel and its associated devices • Backup communication channel (UDP/IP over Ethernet) between the CMS and the control panel for cases of non-availability of the GSM/3G cellular network • Powered by external AC/DC converter • Accessories: • LAN cable (RJ45, UTP, unshielded twisted pairs) • Universal AC/DC converter Certifications and approvals: NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. Changes or modifications to this equipment not expressly approved by the party responsible for compliance (Essence Security International Ltd.) could void the user’s authority to operate the equipment. This device complies with FCC Rules Part 15. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation

Navigation menu