Etekcity ESB40 Etekcity Smart Body Weight Scale User Manual 1
Etekcity Corporation Etekcity Smart Body Weight Scale 1
Etekcity >
User Manual
14iB-001E R0
The product picture is indicative only. Appearance specifications please in kind prevail.
Start here!
Bluetooth Personal Scale
iB-1 SERIES Instructions for Use
ISO 9001 CERTIFIED BY SGS
Caution: The user is cautioned that changes or modifications not expressly approved by the
party responsible for compliance could void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be
installed and operated with a minimum distance of 20cm between the radiator and your body.
This transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter.
2x1.5V AAA
Battery
DEAR USERS:
KEY FUNCTIONS:
● Directly check personal weight information through graphs;
● Set password to protect personal information and store multi-user data;
● Simply and clearly graph the tendency of weight and BMI, from which you
are able to keep track of the change.
● Bluetooth wireless technology;
● Connect with different smart devices respectively.
BATTERY INSTALLATION
battery baffle
A. Take out the used battery with
the aid of a cuspidal object
B. Install new battery by putting
one side of the battery beneath
the battery baffle and then
pressing down the other side.
Please take note to the polarity.
1x3V or 2x3V lithium
battery(CR2032)
ABOUT SENSSUN BLUETOOTH SCALE
Bluetooth personal scales help you to store and keep track of your weight on your smart phone.
This scale can transmit your weight data to your mobile device via Bluetooth technology, as well
as make graph of your weight results, from which you are able to keep track of the trend anytime.
Download SENSSUN scale software to use Bluetooth scale, you will start your first step of weight
control.
Thanks for using our Smart Bluetooth scale! To make sure data correctness and product service
life, please read the instruction manual carefully before use, and keep for later reference.
TO CONVERT WEIGHT UNIT
If the scale is with both measuring system of Metric(kilograms) and Imperial (pounds, stones),
you can convert weight unit as follow:
Battery
Cover
Unit switch
kg/lb/st
Condition 1: if the unit switch is on the back of the scale,
A. Find unit switch on the back of scale.
B. Pull up and down the unit switch to convert scale
unit between kg-lb-st.
Note: Please use corresponding battery. Please remove battery if it is not inuse in a long time
(more than three months).
REGULAR WEIGHING MODE
Reading result will flash
after weight stabilized.
Condition 2: if the unit switch is on the back of the scale,
A. Find unit switch on the back of scale.
B. Press the unit conversion button when scale
is power on, LCD shows current weight unit.
Press the button again to convert weight unit.
Unit button
After installing battery, place the scale on at oor. Keep stand still on scale when testing.
Then wait for seconds, display shows the same weight reading for approximate a few seconds.
4
ADVISE FOR USE & CARE
AUTOMATIC SWITCH OFF
COMMON WARNING INDICATION
Auto shut-off occurs after display shows the same weight reading
for approximate a few seconds, if it is not in use.
● Please confirm the Bluetooth icon on the software interface is in dark blue, showing
connected successfully.
● Confirm the Bluetooth is on in your device.
● Confirm the Bluetooth scale is on within the valid range of signal coverage.
● Check the battery of Bluetooth scale, replace it if necessary.
● Restart your device and set up Bluetooth connection.
FAQ
The software can't obtain weighing results from Bluetooth scale.
● Please make sure only one device is setting up connection with the Bluetooth scale.
● Please make sure your device is equipped with Bluetooth 4.0 or above.
Fail to connect to your device
● Please first check the batteries and replace them if necessary.
● Repairs may only be carried out by our autherized custormer service or dealers.
LCD has no responses
5 6