Etekcity ESWL03 Smart WiFi Light Switch User Manual 15 ESWL03 UserMan

Etekcity Corporation Smart WiFi Light Switch 15 ESWL03 UserMan

15_ESWL03 UserMan

ETEKCITYSmart WiFi Light SwitchModel No.:ESWL03Questions or ConcernsMon-Fri 9:00 AM - 5:00 PM PTsupport@etekcity.com • (855) 686-3835
1Thank you for purchasing the Smart WiFi Light Switch byEtekcity.Your smart light switch allows you to control electricalappliances, such as lights, fans, and kitchen appliances withyour Android™ or iOS™ devices. Pair your smart outlet with theEtekcity VeSync app to use your phone to control yourconnected electrical appliances anywhere, at any time. Set upyour smart outlet with the IFTTT™ (if this then that) app toprogram your smart home.If you have any questions or concerns, please reach out toour helpful Customer Support Team at support@etekcity.com.We hope you enjoy your new smart light switch!Become an EtekcitizenExclusive deals, giveaways, and product registration.Better products for better living.Find us here: etekcity.com
2Table of Contents1. Product Introduction..................................................................................................................................................... 3Package Contents........................................................................................................................................................ 3Specifications................................................................................................................................................................ 3Safety Information.........................................................................................................................................................3Product Requirements................................................................................................................................................. 4Function Diagram......................................................................................................................................................... 4FCC Notice.................................................................................................................................................................... 5FCC Radiation Exposure Notice................................................................................................................................ 52. Installation...................................................................................................................................................................... 6What You’ll Need...........................................................................................................................................................6Checking Wires............................................................................................................................................................. 6Removing the Old Light Switch.................................................................................................................................. 8Installing the Smart Switch..........................................................................................................................................83. Add Device.....................................................................................................................................................................9VeSync App Setup........................................................................................................................................................9Configuration............................................................................................................................................................... 104. Functions......................................................................................................................................................................14Turning Devices On/Off............................................................................................................................................. 14Create Schedule......................................................................................................................................................... 15Set Timer......................................................................................................................................................................19Away Mode.................................................................................................................................................................. 20Smart light switch Settings........................................................................................................................................23Share Your Smart light switch.......................................................................................................................... 24Delete a Smart Outlet........................................................................................................................................ 245. More Features.............................................................................................................................................................25Connecting with Amazon® Alexa™.........................................................................................................................25Connecting with Google Home™............................................................................................................................ 25Log Out.........................................................................................................................................................................256. IFTTT............................................................................................................................................................................ 26Pairing Your Smart Outlet with IFTTT..................................................................................................................... 26Create an Applet Using Existing VeSync Templates............................................................................................28Create a Custom Applet............................................................................................................................................ 297. Maintaining Your Smart Light Switch...................................................................................................................... 32Firmware Updates...................................................................................................................................................... 32Factory Reset.............................................................................................................................................................. 328. Troubleshooting.......................................................................................................................................................... 339. Warranty Information................................................................................................................................................. 35Terms & Policy............................................................................................................................................................ 3510. Customer Support.............................................................................................................................................. 36
31. Product IntroductionPackage Contents2 x Smart WIFI Light Switch 3 Way1 x Quick Start Guide10 x Terminal CapsSpecificationsCommunication Mode IEEE802.11b/g/n (WiFi)Communication Frequency 2.4GHzWireless Distance (outlet to Router) 98-164 feet | 30-50 meters (max visible range)Maximum Switch Current 15AAC Power Supply Range & Supply Frequency AC 120V, 60HzOperating Environment -10 ºC~ 40 ºC (14°F ~ 104°F)Storage & Transportation Environment -20 ºC ~70 ºC (-4°F -158°F)Size 4.13 x 1.75 x 1.75 in (10.5 x 4.40 x 4.40 cm)Compatible Systems Android™ 4.3 or higher iOS™ 8.0 or higherSafety InformationTo reduce the risk of injury and/or damage to this switch, please read and follow all instructionsand safety guidelines in this manual.InstallationWARNING: RISK OF ELECTRIC SHOCK OR FIRE.Before installing and wiring, TURN OFF POWER by locking the appropriate circuit breaker in the OFFposition or removing the appropriate fuse. Use a non-contact voltage tester to ensure all electrical poweris off. Installing and wiring with active electrical power may result in serious injury or death.Only install the smart switch if you are comfortable with electrical work. If not, contact a qualifiedelectrician. Improper installation significantly increases risk of fire, contact a qualified electrician. Improperinstallation significantly increases risk of fire,Note: Etekcity cannot guarantee the quality of installation, and cannot cover associated costs.General SafetyOnly use your smart switch to control incandescent, LED, halogen, and compact fluorescent light bulbs.Using your smart switch for other purposes may result in serious injury, property damage, or death.Only use indoors, in a dry location with ambient temperature controls (avoiding extreme heat and freezingtemperatures).Do not modify the smart switch hardware or software. This may cause injury or property damage, and willvoid the warranty.
4Note: This smart switch complies with Part 15 of the FCC Rules. Operation is subject to the following 2conditions: (1) this device may not cause harmful interference, and (2) this device must accept anyinterference received, including interference that may cause undesired operation.SAVE THESE INSTRUCTIONSProduct RequirementsIn-wall installation with hardwired connections.Neutral wire requiredNOTE: The smart switch is not suitable for a single-wire switch box.Way switch. The electrical box should be more than 2 inches deep.NOTE: 3-Way Switching, where a light is controlled from two switch locations, is common in hallways, stairs,and living rooms. In this configuration, you can turn the light on and off from either location.A smartphone or tablet running iOS 8.0 or higher, or running Android 4.3 or higher.A 2.4GHz WiFi connection (supports 802.11b/g/n standard).The smart switch is compatible with incandescent, LED, halogen, and compact fluorescent light bulbsFunction Diagram1. Power Button2. WiFi Indicator3. Power IndicatorPower IndicatorAfter installation, the switch is OFF and the power indicator is ON.Press to turn the switch on and off.When the switch is ON, the indicator light is OFF.WiFi Indicator StatusIndicator is off Smart switch is not configured.Indicator is turned off in VeSync app.Indicator solid white Smart switch is configured.Indicator blinks 1 time per second Smart switch is in Configuration Mode(see page 17)
5Indicator blinks 4 times per second (total 10 times) Smart switch has been factory reset (see page 46).Indicator blinks 2 times per 5 seconds The smart switch does not connect with router.Indicator blinks 1 time per 5 secondsThe smart switch has connected with routersuccessfully, but the router is not connected to theinternet.FCC NoticeThis device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)this device may not cause harmful interference, and (2) this device must accept any interference received,including interference that may cause undesired operation. Any changes or modifications not expresslyapproved by the party responsible for compliance could void the user's authority to operate the equipment.Note: This equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipment generates, uses, and can radiate radiofrequency energy and, if not installed and used in accordance with the instructions, may cause harmfulinterference to radio communications. However, there is no guarantee that interference will not occur in aparticular installation. If this equipment does cause harmful interference to radio or television reception, whichcan be determined by turning the equipment off and on, the user is encouraged to try to correct theinterference by one or more of the following measures:● Reorient or relocate the receiving antenna.● Increase the separation between the equipment and receiver.● Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.● Consult the dealer or an experienced radio/TV technician for help.FCC Radiation Exposure NoticeThis equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. Endusers must follow the specific operating instructions for satisfying RF exposure compliance. To maintaincompliance with FCC RF exposure compliance requirements, please follow operation instructions asdocumented in this manual. This transmitter must not be co-located or operating in conjunction with any otherantenna or transmitter. This equipment should be installed and operated with a minimum distance of 20cmbetween the radiator and your body. The availability of some specific channels and/or operational frequencybands are country dependent and are firmware programmed at the factory to match the intended destination.The firmware setting is not accessible by the end user.
62. InstallationFor a video walkthrough of these instructions, scan the QR code.You can also type in the web address:https://www.youtube.com/**************************.Watching the video walkthrough is highly recommended.What You’ll NeedNon-contact voltage testerWire nuts (also called twist-on wire connectors).PliersPhilips screwdriverFlathead screwdriverInsulated glovesCAUTION:Only install the smart switch if you are familiar and comfortable with electrical work. If not, contact aqualified electrician. Improper installation can be very dangerous.Wear insulated gloves while installing the smart switch.Note: The smart switch is a multi-way switch, which means the smart switch is compatible with lights controlledby multiple switches.Checking Wires1. Use the voltage tester to test a powered electrical cable to make sure the voltage tester is working. If thevoltage tester lights up, it’s working.2. To avoid electric shock, before installation, TURN OFF POWER by turning off the circuit breaker.Note: You may need to shut off more than one circuit breaker or switch to make sure the power is off.3. Unscrew and remove the faceplate from the old light switch.4. Use the voltage tester to test around the and off a few times to make sure that the power is OFF. Thevoltage tester should not light up, and the light should not turn on.5. Unscrew and pull out the old light switch (without detaching the wires).6. Check if the wiring in your house is compatible with the three-way switch, and you can check if your oldthe QR code.
7switch has five wire connections, two travel wires, one black wire, one white neutral wire, and one greengrounding wire.Without these wires, it may not be compatible with the three-way smart switch.You cancheck other switches to confirm compatibility.You can also seek help from local electricians to run the newwiring.About the WiresWire Nuts: These are the cap-like objects connecting wires together, also known as twist-on wireconnectors.TravelerThese wires connect the two wall switches together and allow power to pass between them. One of thetwo traveler wires is always energized when power is on.All multi-way switches have a traveler wire.Line（”Live”）switch A:This wire carries power into the circuit from the main service panel; this is the source ofpower for your light and will always be energized, regardless of how the switches are configured.switch B:This wire carries power from the switches to the light fixture; this wire will only beenergized when the light fixture is on. All switches have a line wireCAUTION:Never twine the load line and the line wire together or connect them both to the power line.Never connect the neutral wire with any other wire.NeutralSome old switches do not have a neutral line. However, a neutral wire is required to install the smartswitch. This is because the smart switch needs to be powered on at all times to operate.If you cannot find a neutral line in your switch junction box, contact a qualified electrician to rewire theswitch.
8GroundA ground wire is not required for the smart switch to work, as not all switches need ground wires.However, if a ground wire is present, it must be connected to the smart switch.Removing the Old Light Switch1. After taking off the faceplate and checking the wires, use the voltage tester again to test for any currentaround the wires.2. Straighten out the 5 wires.3. Unscrew a wire from the old light switch. Use pliers to straighten the wire. Then, screw a wire nut on thatwire.4. Follow the same steps for the other 4 wires..Installing the Smart Switch1. Make sure you understand the five wires on your smart switch. Check the labels on the switch next to eachwire.2. Hook up the white wire to the neutral wire, which is usually white as well, by screwing on a wire nut tightlyaround the 2 wires.Note: There will often be two neutral wires already connected by a wire nut. Connect all the neutral wirestogether with one wire nut.3. For extra safety, wrap electrical tape around the wires to make sure the copper conductor is fullyconcealed4. Hook up the green wire to the ground wire, which is also usually green.5. Connect the black wire of switch A to cable "L".Connect the black wire of switch B to the L end of the bulb.6. Connect the red traveler lines of the two switches.The connecting line can be in any color other than black.7. Connect the white line of the switch to the N line of the circuit, which is also usually white.8. Push the wires and the wire nuts back into the wall (into the junction box).9. Line up the smart switch and screw on the mounting screws.10. Snap the smart switch faceplate on tightly.
911. Turn power back on at the circuit breaker, and test the light switch by turning it on.12. You’ve successfully installed your smart switch.3. Add DeviceVeSync App SetupNote: The VeSync app and IFTTT app user interfaces may appear slightly different.A. Connect your mobile device to a 2.4GHz WiFi network.Note: The smart light switch will only setup on a 2.4GHz networkB. Scan the QR code or download the VeSync app from the App Store® or the Google Play™ store.Note: For Android users, you must select “Allow” to use VeSync.C. Open the VeSync app. Tap Sign Up to create a new account.
10D. After you’ve signed up, enter your email and password, then tap Log In.Note: You must create your own VeSync account to use third-party services and products, such as theAmazon® Echo™, Google Home™, and IFTTT™. The guest account will not work for this. With a VeSyncaccount, you can also allow your family or friends to control your smart switch.ConfigurationAdd the smart light switch to your app.
11A. Tap the “+” button to add your smart light switch.B. Tap SwitchesC. Tap Etekcity Light Switch 3 way.D. Tab Next.E. Plug in and turn on your smart switch. The LED indicator light should blink blue (1 blink per second),indicating that your smart switch is in Configuration Mode.a. If the LED indicator light is blinking, tap Next.b. If the LED indicator light is not blinking, tap My LED light is not blinking. Press and hold the powerbutton for 5 seconds, until the LED indicator light blinks blue (1 blink per second). Then tap It StartedBlinking.
12Note: Configuration Mode will turn off after 10 minutes.F. Type in the name of your home WiFi network and password, then tap Join Network.Note: The smart switch configuration requires a 2.4GHz WiFi network.G. Tap Connect and select the WiFi network that reads “VeSync_xxxx”.
13H. The switch will take a few seconds to connect. To return to the “Add Device” page, tap <.I. Your setup is complete! Give your switch a unique name, or use the default name and tap Ok.Note:Tap to change the outlet icon.You can change the device name and icon at any time.Tap , then tap Device Settings.
144. FunctionsTurning Devices On/OffMethod 1:On the “My Home” page or the smart light switch page, tap to turn the devices on or off.Method 2:Tap on the smart switch’s name on the “My Home” screen to view device options and details. Tap to turn thelight on/off.NOTE: The smart light switch will remain connected to the internet even when it is turned off
15Create ScheduleTap to the smart light switch in the device list, Go to the smart light switch page.A. Tap Create Schedule to create a scheduled time for the smart light switch to turn on and off..B. Go to the Create Schedule page and set the working time of the smart light switch.1.To set a start time:a. Tap “ >” next to start.b. Scroll up and down to select time. Alternatively, tap <for Sunrise and >for Sunset.c. Tap √to confirm.Note: You must allow the VeSync app to access your location to determine when Sunrise andSunset are for your area.
162.Choose On or Off at start time .3.To set an end time (optional):a. Tap >next to End.b. Scroll up and down to select time. Alternatively, tap <for Sunrise and >for Sunset.c. Tap √to confirm.Note: You must allow the VeSync app to access your location to determine when Sunrise andSunset are for your area.abc
174.Choose On or Off at end time.5.Repeat (Optional) - Select days you want this task to repeat.
186．Tap √on the top right of the screen when you are done creating the schedule.C. Turn the schedule on or off on the smart light switch page by tapping the toggle next to the scheduledtime.
19Set TimerYou can create a timer to turn your smart light switch on and off.A. Tap Timer. Then, Create Timer.B. Scroll up and down to set time and select On or Off.C. Tap √to confirm and start timer. Timer will start automatically.
20D. Tap to cancel the timer. Tap to restart the timer.NOTE:If you selected On, the timer will turn on after the timer endsTo remove the timer entry, tap on the timer entry, then tap Delete.Away ModeWhen you have a light plugged into your smart light switch, you can use the Away Mode timer to turn your light
21on and off to give the appearance that someone is home.A. Tap Away, then Set Away Mode.B. Select an option from the “Away Mode” page.1.start:Sets time to start Away Modea. Tap >next to “Start”.b. Scroll up and down to select time.c. Tap √to confirm.2.EndSets time to end Away Modea. Tap > next to “End”.
22b. Scroll up and down to select time.c. Tap √to confirm.3.RepeatSelect days you want to repeat Away Mode.a. Tap > next to “Repeat”.b. Select days you want this task to repeat.c. Tap √to confirm.C．You can turn the Away Mode timer on/off at any time by tapping the toggle button to the right of the timer.
23Smart light switch SettingsTap to see Device Settings. The Device Settings menu allows you to:A. Edit your smart light switch name.B. Edit your smart light switch picture.C. Turn on/off WIFI indicator light.D. Turn smart switch notifications on/off by tappingE. Share your smart light switch.F. Upgrade Firmware(Tap to update firmware).G. Delete your smart light switch.ACBDEFG
24Share Your Smart light switchUse Share Device to allow someone else to control your smart light switch (such as family, friends, roommates,or anyone you choose).Note: People who you share your smart light switch with cannot edit or delete any of your device settings.A. Tap +.B. Type in the email of the person you want to share your device with. Tap Invite.C. Tap to remove people you have shared your device with. They will no longer be able to control yoursmart light switch.Delete a Smart OutletA. You can delete your smart light switch from the VeSync app from the “Device Settings” screen. To deleteyour device, tap Delete Device.B. You can also delete your smart light switch’s from the “My Home” screen in the VeSync app.a. iOS™: Swipe left on the smart light switch’s name to delete.b. Android™: Press and hold for 2 seconds on the smart light switch’s name to delete.ABC
255. More FeaturesOn the “My Home” page, tap More, for more features.Connecting with Amazon® Alexa™To view instructions on the VeSync app, tap More, then tap Link to Alexa.Note: You must create your own VeSync account to connect with Alexa.Connecting with Google Home™.To view instructions on the VeSync app, tap More, then tap Link to Google Assistant.Note: You must create your own VeSync account to connect with Google Home.Log OutA. On the “My Home” screen, tap More.B. Tap your profile, then tap Log Out.Note: You do not need to log out if you are not using a VeSync accountABab
266. IFTTTPairing Your Smart Outlet with IFTTTA. Download the IFTTT app from the App Store or Google Play store.B. Open the app and tap sign up or sign in.C. Tap .
27D. Enter “VeSync” and tap Services.E. Tap Connect.F. Enter your VeSync account details and tap Authorize.
28Create an Applet Using Existing VeSync Templates.A. Open the IFTTT app and tap My Applets.B. Tap Services and tap VeSync.C. Scroll to search for an applet you want to use, such as “Turn on a VeSync smart device atsunrise“ or“Activate a device every day at a specific time“.D. Slide the toggle switch to turn on the applet.
29E. Under Device, select the smart outlet that you want the applet to apply to and tap Save.F. The applet has been created successfully!Create a Custom AppletA. On the My Applets screen, tap + .B. Tap this to add a Trigger Service.
30Example:To trigger a service everyday at 11:45 PM:a. Tap the Date & Time icon.b. Tap Every day at.c. Under “Time”, select 11:45 PM.Note: Popular Trigger Services include Date & Time, Location, and an Alexa or Google Home Command.Different Trigger Services have different user interfaces.C. After selecting the Trigger Service, tap this to enter an Action Service.D. Tap the VeSync icon.
31E. Tap Activate a Device.F. Select the smart outlet and status you would like to activate (turn on or turn off). Tap Create Action.G. Tap Finish. You’ve created your own custom applet!
327. Maintaining Your Smart Light SwitchFirmware UpdatesTo keep the smart light switch up-to-date with the latest improvements and fixes, you should always update thefirmware when available.On the Device Settings screen, tap Upgrade Firmware.Factory ResetFactory resetting the smart light switch can help you troubleshoot any issues you may have. Please keep inmind that factory resetting a device will erase all of your custom settings and restore the factory defaultsettings.Press and hold the power button for about 15 seconds until the light indicator blinks blue rapidly then turnssolid blue.
338. TroubleshootingQ: Why can’t I connect my light switch to my WiFi network during setup?Make sure your phone is connected to a 2.4GHz WiFi network. Smart light switches currently onlysupport 2.4GHz WiFi networks during configuration, but you can use any available network, includingcellular data networks, to control the switch from your phone once you’ve finished setting up...Try moving your router closer to your smart switch (164 ft / 50 m visible range is best).Make sure you have turned off MAC address filtering.Make sure you don‘t have too many devices connected to your router. Your router may have a limit ofconnected devices which can be turned off in your router settings..Close and reopen the VeSync app.Clear your VeSync app cache.Factory reset your smart switch (see Factory Reset, page 28).Q: How do I change my WiFi network to a 2.4GHz WiFi network?Most dual-band routers support both 2.4G and 5G networks. Select the WiFi name that does not endin "_5G".If your phone is attempting to connect to the 5G network, try "forgetting" or temporarily disabling the5G network.Some routers hide the 2.4GHz WiFi network. If you have trouble finding or setting up your 2.4GHznetwork, please contact your router manufacturer for support..Q: I already have another smart switch connected. Why won't this smartswitch connect?Close and relaunch the VeSync app, then reset the smart that is not connecting.Use APN Mode to set up the outlet (see page 5).Q: I could not find "VeSync_xxxx" access point when configuring thenetwork.Press and hold the power button on the smart switch for 5-9 seconds to trigger Configuration Mode.The " VeSync_xxxx " access point will appear in your list of available WiFi connections.During Configuration Mode, the LED light on the outlet will slowly blink blue. You will have 10 minutesto pair the outlet with your phone.Q: My smart switch is offline.Delete the offline smart switch from the VeSync app. Swipe left (iOS) or tap and hold (Android), and tapDelete.Hard reset the smart switch by pressing and holding the power button for more than 20 seconds. TheLED light will blink rapidly and turn solid blue.
34Once the smart switch has been deleted and reset, reconfigure your smart switch with the VeSync app.Note: Power outages or changing WiFi routers may cause your smart switch to go offline.Q: Why won't the VeSync app let me add my smart switch?If the smart switch is already added to another person's VeSync app, ask them to share the smartswitch with you (see Share Your Smart Switch, page 19) so that you can control it with your VeSyncaccount.Be sure your WiFi password is entered correctly.Use APN Mode (page 7).Make sure your smart switch firmware is up to date (see Firmware Updates, page 28).Factory reset your smart switch (see Factory Reset, page 28).Q: After adding my smart switch to VeSync, why won't the smart switch iconappear on the "My Home" screen of the VeSync app?Refresh your “My Home” screen (by switching between screens or closing and reopening the app), andthe switch icon should appear.Q: Alexa or Google Home can't find my app or can't discover my smart outlet.Make sure your wireless network router is close enough to your smart switch. The smart switch mustbe within a 164 ft (50 m) visible range from the router.Try moving your router closer to your light switch (164 ft / 50 m visible range is best).Check that your Alexa or Google Home is working properly.Try reconnecting to Alexa/Google Home.Q: Why isn't my smart switch turning on/off as scheduled?Make sure that the schedule is still turned on. The toggle switch should look like ,not .Make sure that your phone's Location Services are turned on.Make sure the smart switch is connected to a working network and is not offline.Q: I believe my smart switch is defective. What should I do?Contact Customer Support (page 31).
359. Warranty InformationTerms & PolicyEtekcity warrants all products to be of the highest quality in material, craftsmanship, and service, effective fromthe date of purchase to the end of the warranty period.Etekcity will replace any product found to be defective due to manufacturer flaws based on eligibility. Refundsare available within the first 30 days of purchase. Refunds are only available to the original purchaser of theproduct. This warranty extends only to personal use and does not extend to any product that has been used forcommercial, rental, or any other use in which the product is not intended for. There are no warranties otherthan the warranties expressly set forth with each product.This warranty is non-transferrable. Etekcity is not responsible in any way for any damages, losses, orinconveniences caused by equipment failure by user negligence, abuse, or use noncompliant with the usermanual or any additional safety, use, or warnings included in the product packaging and manual.This warranty does not apply to the following:Damage due to abuse, accident, alteration, misuse, tampering, or vandalism.Improper or inadequate maintenance.Damage in return transit.Unsupervised use by children under 18 years of age.Etekcity and its subsidiaries assume no liability for damage caused by the use of the product other than for itsintended use or as instructed in the user manual. Some states do not allow this exclusion or limitation ofincidental or consequential losses so the foregoing disclaimer may not apply to you. This warranty gives youspecific legal rights and you may also have other rights which may vary from state to state.ALL EXPRESSED AND IMPLIED WARRANTIES, INCLUDING THE WARRANTY OF MERCHANTABILITY,ARE LIMITED TO THE PERIOD OF THE LIMITED WARRANTY.Additional 1-Year WarrantyYou can extend your 1-year warranty by an additional year. Log onto www.etekcity.com/warranty and enteryour order number (for example, from Amazon or Houzz) to register your new product for the extendedwarranty.If you are unable to provide the order number for your product, please type a short note in the order numberfield along with the date you received your product.Defective Products & ReturnsIf your product proves defective within the specified warranty period, please contact Customer Support viasupport@etekcity.com with your order number. DO NOT dispose of your product before contacting us. OnceCustomer Support has approved your request, please return the unit with a copy of the invoice or your ordernumber.
3610. Customer SupportIf you encounter any issues or have any questions regarding your new product, please contact our helpfulCustomer Support Team. Your satisfaction is our goal!Etekcity Corporation1202 N. Miller St., Suite AAnaheim, CA 92806Email: support@etekcity.comToll-Free: (855) 686-3835Support HoursMonday - Friday9:00 am - 5:00 pm PTPlease have your order confirmation number ready before contacting customer support.Back to Table of Contents

Navigation menu