Etekcity ZAP1FXT Etekcity Outdoor Remote Control Outlet Transmitter User Manual

Etekcity Corporation Etekcity Outdoor Remote Control Outlet Transmitter

User manual

Outdoor Remote Control OutletModel No.: ZAP 1FXQuestions or Concerns?(855) 686-3835 • support@etekcity.comThank You.Thank you for purchasing the ZAP 1FX Outdoor RemoteControl Outlet by Etekcity. We are dedicated to providingour customers with quality products for building a betterliving. Should you have any questions or concerns aboutusing your new product, feel free to reach out to our helpfulcustomer support team at (855) 686-3835 or by emailat support@etekcity.com. We hope you enjoy your newproduct!Package Contents1 x Remote Control Outlet1 x Remote Control1 x 12V/23A Battery1 x User ManualSafety InformationIMPORTANT: Please read and comply with all of the instructions and warnings provided in this manual before using the product. Failure to comply with the instructions and warnings provided herein may result in inaccurate results and/or damage to the product itself.Important Safety Information••••••••••••• The wireless range may be shortened by otherelectronic devices, appliances, walls, and other physicalbarriers.This outlet is intended for outdoor use, but can also beused indoors.Avoid exposing the outlet to moisture.DO NOT exceed the maximum load current of 10A(approximately 1200W).DO NOT use appliances such as refrigerators, airconditioning units, and washing machines with theoutlet. Such appliances exceed the maximum loadcurrent of 10A (1200W).Keep out of reach of children.To avoid overheating, this outlet is best used in areaswith proper air circulation.For your safety, make sure the batteries within theremote is correctly installed before use.DO NOT dispose any part of this product in a fire.The remote is not compatible with rechargeablebatteries.This device is not intended for use in areas with highhumidity, such as bathrooms.For best results, regularly change the battery in theremote control.If the remote is not in use for an extended period oftime, remove the battery from the remote.Discard all parts of this product in accordance withlocal environmental regulations. Do not dispose inregular household waste.This outlet is not compatible with the ZAP 3VX, 5LX,5LX-S remote outlets, or with older remote-controlledoutlet models.Function Diagram1. Outlet2. Power / Program Button3. Outlet Indicator Light4. Remote control5. On Buttons6. Off Buttons7. Battery Compartment2456317OperationThe outlet is pre-programmed for immediate use, but the configuration can be customized to meet your needs.1. Install one 12V/23A battery into the remote control.2. Plug the outlet into a powered socket.Reprogramming an Outlet1. Unplug device from the outlet.2. Press and hold the programming button until the indicator light starts to blink.131133242244pressandhold3. Plug an appliance into each outlet. Keep the appliance switch to ‘ON’ in order to allow the outlet to control the device.4. Press the ‘ON’ or ‘OFF’ button for the corresponding letter on the remote.3. Release the program button, press the "ON" or "OFF" button for the desired number on the remote. 4. Pairing is successful when the indicator light stops blinking. The indicator light on the corresponding outlet will turn on, confirming that the outlet is now in use.NOTE: You may repeat the re-programming steps to assign up to 10 outlets to a single letter to simultaneously control multiple devices with a single click.Resetting an OutletTo remove an outlet from all remote control pairings:1. Unplug any devices connected to the remote outlet.Remove the outlet from the power socket.2. Press and hold the program button.3. Plug the outlet back into the power socket while continuing to hold the program button.4. Program reset will be complete when the indicator light stops blinking.pressandholdCAUTION: To Reduce the Risk of Electric Shock – Use Only Indoors.ATTENTION: Pour réduire le risque de choc électrique - Utiliser uniquement à l'intérieurCAUTION: Risk of Electric Shock. Do not plug into another relocatable power tap or an extension cord.ATTENTION: Risque de choc électrique. Ne le branchez pas sur un autre robinet d'alimentation relogable ou sur une rallonge.CAUTION: Use only in dry locationsATTENTION: Utiliser uniquement dans des endroits secsFCC ID:2AB22-ZAP1FXTFCC ID:2AB22-ZAP1FXT
Troubleshooting SpecificationsIssue SolutionOutlet is unresponsive to remote commands.Replace the remote battery with new 12V / 23A battery. Low battery power may decrease readable wireless remote range.Make sure the outlet and device are properly connected and powered on.Make sure that the outlet is placed in an area with proper air circulation without overheating.Make sure the maximum load current of 10A (approximately 1200W) is not exceeded. If so, unplug the device from the outlet immediately.If the outlet is still unresponsive, refer to the Resetting and Reprogramming sections in the manual.Voltage 120V / 60HzMax Current 10AMax Power 1200WTransmission Frequency 433.92MHzRemote Battery Power 12V (23A)Remote Control Range 100 ft. (30m)*Operating Temperature 32°~95°F (0°~35°C)Storage Temperature -4°~167°F (-4°~75°C)WarrantyTERMS & POLICYEtekcity warrants all products to be of the highest quality in material, craftsmanship and service for a minimum of 1 year, effective from the date of purchase. Warranty lengths may vary between product categories. Etekcity will replace any product found to be defective due to manufacturer flaws based on eligibility; refunds are available within the first 30 days of purchase. This warranty extends only to personal use and does not extend to any product that has been used for commercial, rental, or any other use in which the product is not intended for. There are no warranties other than the warranties expressly set forth with each product.This warranty is non-transferrable. Etekcity is not responsible in any way for any damages, losses or inconveniences caused by equipment failure or by user negligence, abuse, or use noncompliant with the user manual or any additional safety, use, or warnings included in the product packaging and manual.This warranty does not apply to the following:• Damage due to abuse, accident, alteration, misuse, tampering or vandalism.• Improper or inadequate maintenance. • Damage in return transit.• Unsupervised use by children under 18 years of age.Etekcity and its subsidiaries assume no liability for damage caused by the use of the product other than for its intended use or as instructed in the user manual. Some states do not allow this exclusion or limitation of incidental or consequential losses so the foregoing disclaimer may not apply to you. This warranty gives you specific legal rights and you may also have other rights which may vary from state to state.ALL EXPRESSED AND IMPLIED WARRANTIES, INCLUDING THE WARRANTY OF MERCHANTABILITY, ARE LIMITED TO THE PERIOD OF THE LIMITED WARRANTY.Should your product prove defective within the specified warranty period, please return the defective unit in its original packaging with (1) an original copy of the invoice, (2) your order confirmation number, (3) and your warranty ID number. To find out more about extending your warranty, visit www.etekcity.com/warranty or contact customer support.Date of PurchasePlace of PurchaseOrder NumberCustomer SupportShould you encounter any issues or have any questions regarding your new product, feel free to contact our helpful Customer Support Team. Your satisfaction is our goal!Customer SupportEtekcity Corporation1202 N. Miller St. Suite AAnaheim, CA 92806Local: (657) 500-1872Toll-Free: (855) 686-3835Fax: (657) 202-1693support@etekcity.comSupport HoursMonday - Friday:9:00 am - 5:00 pm PST*Please have your orderconfirmation number readybefore contacting customersupport.*NOTE: The wiThis device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.reless range may be shortened by other electronic devices, appliances, walls, and other physical barriers.Scan here to join the community!Visit us at www.etekcity.comBuilding on better living.Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Navigation menu