Euro Communication EquipementS BTMOTOF3S BTMOTOF3S User Manual SUPERTOOTH MOTO II

Euro Communication Equipement SAS BTMOTOF3S SUPERTOOTH MOTO II

user manual

INTERPHONE F3SBluetooth Headset for Motorcycle FeaturesAuto-Volume Level Adjusting________________________________________________________________ 1
A. PRODUCT DESCRIPTION: INTERPHONE F3S is a Bluetooth Headset designed for motorcycle rider or passenger who wishes to have reliable hands-free, wireless and clear communications while driving. This headset is equipped with hi-tech features such as: Auto-Volume Level Adjusting. 1. MFB or Multi-Function Button (power on & off / pairing / answer / hang-up / reject / voice dial / intercom connect / etc.) 2. Headset Plug3. Volume Up4. Volume Down5. Status Indicator6. Left/Right (L/R) Ear Speaker7. Microphone (On the flexible boom)8. Charger and Headset Socket9. Hook B. CHARGING:1When the Status Indicator (5) turns Red, the battery is low. Charge the unit using the provided charger. 2Connect the charger’s plug to the Charger Socket (8) of the INTERPHONE F3S. Then, plug the charger to an external power source. (Note: Status Indicator (5) turns Red when charging).3When the Status Indicator (5) turns Green, charging is complete.4Disconnect the charger.C. POWER ON OR OFF:Power On: Press the MFB (1) until Status Indicator (5) turns blue. Or press for approximately 3 seconds, a beep will be heard.Power Off: Press the MFB (1) until Status Indicator (5) turns red. Or press for approximately 5 seconds, until 3rd tone will be heard. 2
D. PAIRING TO YOUR BLUETOOTH MOBILE PHONE:1.From OFF, press and hold the MFB (1) of the INTERPHONE F3S until the Status Indicator (5) turns blinking red/blue.2.While the headset is in pairing mode, access the Bluetooth menu of your phone. Turn on the Bluetooth function then execute a Bluetooth search. (See your phone’s manual). 3.When the phone displays the list of Bluetooth devices, select BTMOTOF3S then enter 0000 and press ok. Pairing is successful if the alternating red/blue lights of the Status Indicator (5) changes to blinking blue. Note: Some phones do not connect automatically to the kit after pairing. You need to press the MFB (1) (1st beep) to connect. Or use the menu of your phone:Go back to Bluetooth > Paired devices > highlight the name of this headset (BTMOTOF3S) > press Options > then press Connect.The INTERPHONE F3Sis now ready to use.E. BASIC OPERATION:IMPORTANT:The INTERPHONE F3S needs to be ‘paired’ with your Bluetooth mobile phone before you can use the following functions. (See Pairing to your Bluetooth Mobile Phone on section D.)Make a Call: -Dial the number using your phone. Audio will automatically be on the headset.Note: With some phones, audio is always on the phone during an outgoing call. You will need to press the MFB (1) to transfer the audio to your headset.Answer a Call: - Press the MFB (1) for 1 second to accept a call (1st beep).End a Call: -Press the MFB (1) for 1 second to end the call (1st beep).Reject a Call (For Handsfree Profile Phones only): -Press and hold MFB (1) for 3 seconds (2nd beep). Phone call rejected.Voice Dial: 3
IMPORTANT: First, make sure to activate the voice dial function of your phone. Record at least one voice tag. (Kindly refer to the procedure in your phone’s manual.) Note: Voice dialing entries must be stored in the phone’s memory, not on the SIM card!1.Press the MFB (1) for 1 second (1st beep) to make a voice dial. A voice dial tone/ beep will be heard on the headset prompting the user to say the voice tag of the contact to call.2.Say the voice tag. The voice will be played back to you, and then the phone will dial the number automatically.Redial:-Press the MFB (1) for 3 seconds (2nd beep). The last dialed number will be redialed.Audio Transfer (For Handsfree Profile Phones only): -During an ongoing call, you can transfer the audio.Headset to Phone: Press and hold the MFB (1) for 3 seconds (2nd beep) and the audio will be transferred to the phone. Phone to Headset: Press the MFB (1) for 1 second (1st beep) and the audio will be transferred to the headset. Note: For some phones, you may need to accept a connection prompt on the phone before automatic transfer takes place.Set the Volume: -Press the Volume Up (3) or Down (4) button repeatedly until the desired level is reached. 4
Industry Canada (IC) Statement15.21You are cautioned that changes or modifications not expressly approved by thepart responsible for compliance could void the user’s authority to operate theequipment.15.105(b)This equipment has been tested and found to comply with the limits for a ClassB digital device, pursuant to part 15 of the IC rules. These limits are designed toprovide reasonable protection against harmful interference in a residentialinstallation. This equipment generates, uses and can radiate radio frequencyenergy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications. However, there is noguarantee that interference will not occur in a particular installation. If thisequipment does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on, the user isencouraged to try to correct the interference by one or more of the followingmeasures:* Reorient or relocate the receiving antenna.* Increase the separation between the equipment and receiver.* Connect the equipment into an outlet on a circuit different fromthat to which the receiver is connected.* Consult the dealer or an experienced radio/TV technician for help.Operation is subject to the following two conditions:1) this device may not cause interference and2) this device must accept any interference, including interference that maycause undesired operation of the device.IC RF Radiation Exposure Statement:This equipment complies with IC radiation exposure limits set forth for anuncontrolled environment. End users must follow the specific operatinginstructions for satisfying RF exposure compliance. This transmitter must not beco-located or operating in conjunction with any other antenna or transmitter. Federal Communications Commission (FCC) Statement15.21You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment.15.105(b)This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna.-Increase the separation between the equipment and receiver.-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.-Consult the dealer or an experienced radio/TV technician for help. Operation is subject to the following two conditions:1) this device may not cause interference and2) this device must accept any interference, including interference that may cause undesired operation of the device. FCC RF Radiation Exposure Statement:This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 5

Navigation menu