Euro Communication EquipementS BTSHARK BTSHARK User Manual QVNBTSHARK

Euro Communication Equipement SAS BTSHARK QVNBTSHARK

User Manual

BTSHARKBluetooth Headset for Motorcycle FeaturesVOX TechnologyA2DP Music StreamingAuto-Volume Level Adjusting1
A. PRODUCT DESCRIPTION: SUPERTOOTH BTSHARK is a Bluetooth Headset designed for motorcycle rider or passenger who wishes to have reliable hands-free, wireless and clear communications while driving. This headset is equipped with hi-tech features such as: VOX Technology, A2DP (Advance Audio Distribution Profile) music streaming and Auto-Volume Level Adjusting.1. MFB or Multi-Function Button (power on & off / pairing / answer / hang-up / reject / voice dial / etc.)2. Status Indicator3. Volume Up4. Volume Down5. Microphone (On the flexible boom)6. Charger and Headset Socket7. NiMh battery8. Left/Right (L/R) Ear SpeakerB. CHARGING:1. When the Status Indicator (2) turns Red, the battery is low. Charge the unit using the provided charger. 2. Connect the charger’s plug to the Charger Socket (6) of the SUPERTOOTH BTSHARK. Then, plug the charger to an external power source. (Note: Status Indicator (2) turns Red when charging). 3. When the Status Indicator (2) turns Green, charging is complete. 4. Disconnect the charger. C. POWER ON OR OFF:Power On: Press the MFB (1) until Status Indicator (2) turns blue. Or press for approximately 3 seconds, a beep will be heard.Power Off: Press the MFB (1) until Status Indicator (2) turns red. Or press for approximately 5 seconds, a beep will be heard.D. PAIRING TO YOUR BLUETOOTH MOBILE PHONE:1. From OFF, press and hold the MFB (1) of the SUPERTOOTH BTSHARK until the Status Indicator (2) turns blinking red/blue.2. While the headset is in pairing mode, access the Bluetooth menu of your phone. Turn on the Bluetooth function then execute a Bluetooth search. (See your phone’s manual). 3. When the phone displays the list of Bluetooth devices, select SHARKTOOTH then enter 0000 and press ok. Pairing is successful if the alternating red/blue lights of the Status Indicator (2) changes to blinking blue. Note: Some phones do not connect automatically to the kit after pairing. You need to press the MFB (1) (1st beep) to connect. Or use the menu of your phone:Go back to Bluetooth > Paired devices > highlight the name of this headset (ST MOTO) > press Options > then press Connect.The SUPERTOOTH BTSHARK is now ready to use.2
E. BASIC OPERATION:IMPORTANT:The SUPERTOOTH BTSHARK needs to be ‘paired’ with your Bluetooth mobile phone before you can use the following functions. (See Pairing to your Bluetooth Mobile Phone on section D.)Make a Call: - Dial the number using your phone. Audio will automatically be on the headset.Note: With some phones, audio is always on the phone during an outgoing call. You will need to press the MFB (1) to transfer the audio to your headset.Answer a Call: -Assuming the VOX is activated: Accept a call by loudly saying a word within 10 seconds. (Example: When you receive the ring tone, Say loudly ”Ok!”) The call will be answered. Audio will be on the headset. (See VOX Activation / Deactivation on section F.)-You also have the option to answer the call normally by pressing the MFB (1) for 1 second (1st beep). End a Call: -Press the MFB (1) for 1 second to end the call (1st beep).Reject a Call (For Handsfree Profile Phones only): -Assuming the VOX is activated: Reject a call by being silent for 10 seconds. The call will automatically be rejected. (See VOX Activation / Deactivation on section F.)-You also have the option to reject the call normally by pressing the MFB (1) for 3 second (2nd beep). Voice Dial: IMPORTANT: First, make sure to activate the voice dial function of your phone. Record at least one voice tag. (Kindly refer to the procedure in your phone’s manual.) Note: Voice dialing entries must be stored in the phone’s memory, not on the SIM card!1. Press the MFB (1) for 1 second (1st beep) to make a voice dial. A voice dial tone/ beep will be heard on the headset prompting the user to say the voice tag of the contact to call.2. Say the voice tag. The voice will be played back to you, and then the phone will dial the number automatically.Redial:-Press the MFB (1) for 3 seconds (2nd beep). The last dialed number will be redialed.3
Audio Transfer (For Handsfree Profile Phones only): -During an ongoing call, you can transfer the audio.Headset to Phone: Press and hold the MFB (1) for 3 seconds (2nd beep) and the audio will be transferred to the phone. Phone to Headset: Press the MFB (1) for 1 second (1st beep) and the audio will be transferred to the headset. Note: For some phones, you may need to accept a connection prompt on the phone before automatic transfer takes place.Set the Volume: -Press the Volume Up (3) or Down (4) button repeatedly until the desired level is reached.F. SPECIAL FEATURE: VOX Activation / Deactivation: - When activated, the user can accept a call by saying any word within 10 seconds. The user can also reject a call by being silent for 10 seconds.-When deactivated, use the MFB (1) to answer a call.The Voice Answer Mode can be enable or disable when the kit is in standby mode (no ongoing call and close any multi media player).Activation: 1. From Connected and standby, press and hold the Volume Up (3) button for 5 seconds.2. A beep will be heard. Then release.Deactivation: 1. From Connected and standby, press and hold the Volume Down (4) button for 5 seconds. 2. A beep will be heard. Then release.G. STREAM MUSIC FROM YOUR A2DP BLUETOOTH MOBILE PHONE:If a phone supports A2DP, you can stream music from your phone to the SUPERTOOTH BTSHARK.Note: The SUPERTOOTH BTSHARK needs to be ‘paired’ with your Bluetooth mobile phone before you can use the following functions. (See Pairing to your Bluetooth Mobile Phone on section D.)Using A2DP Music Streaming To Stream Music:-Go to your phone’s music player and play a track via A/V bluetooth. (See your phone’s manual). -Or Double Short Press the MFB (1) to play/pause music streaming. 4
To Choose Music File:- Long press the Volume Up (3) button for 3 seconds, music will go to the next music file.- Long press the Volume Down (4) button for 3 seconds, music will go back to the previous music file. To Set the Volume: -Press the Volume Up (3) or Down (4) button repeatedly until the desired level is reached.Federal Communications Commission (FCC) Statement15.21You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void theuser’s authority to operate the equipment.15.105(b)This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCCrules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. Thisequipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with theinstructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will notoccur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can bedetermined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures:- Reorient or relocate the receiving antenna.- Increase the separation between the equipment and receiver.- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.- Consult the dealer or an experienced radio/TV technician for help.Operation is subject to the following two conditions:1) This device may not cause interference and2) This device must accept any interference, including interference that may cause undesired operation of the device.FCC RF Radiation Exposure Statement:This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow thespecific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating inconjunction with any other antenna or transmitter.DECLARATION OF COMPLIANCEHereby, EURO COMMUNICATION EQUIPEMENTS, represented by Michel MARCHANT, CEO, declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC of the European Parliament and of the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual recognition of their conformity.Nébias, 15 June 2010Michel MARCHANTCEOFor the whole declaration please visit :http://www.supertooth.fr/downloadEuro Communication Equipements SasRoute de Foix D11711 500 NEBIAS5

Navigation menu