Users Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3023548 |
| Application ID | EQee2Mp6sD4hATgtZz2bHA== |
| Document Description | Users Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 19.4kB (242481 bits) |
| Date Submitted | 2016-06-10 00:00:00 |
| Date Available | 2016-06-13 00:00:00 |
| Creation Date | 2016-03-14 15:16:48 |
| Producing Software | LibreOffice 5.0 |
| Document Lastmod | 2016-06-10 10:27:47 |
| Document Title | INTERPHONE F6 |
| Document Creator | Writer |
| Document Author: | Nova |
Supertooth BT F6 Bluetooth Headset PRODUCT OVERVIEW: 1. ON/OFF or PAIRING button 2. MUSIC button 3. FM button 4. PHONE button 5. DOWN button 6. UP button 7. VOL+ button 8. VOL- button 9. LED Status indicator 10. Charging port 11. Headset port TURNING ON/OFF BT F6 Power ON: Long press ON/OFF or PAIRING button (1). Led turns purple and Power On beep heard together with the voice prompt announcing the battery level. Power OFF: Long press ON/OFF or PAIRING button (1). Led turns purple and Power OFF beep heard together with the voice prompt announcing the battery level. PAIRING BT F6 TO A BLUETOOTH MOBILE PHONE: 1. From OFF, Long press ON/OFF or PAIRING button (1) until LED Status indicator (9). Alternately blinking red/blue (Pairing mode). 2. On your Phone, turn on the Bluetooth function then execute Bluetooth search. (See your phone’s manual). 3. When the phone displays the list of Bluetooth devices, select F6 then enter pin code 0000 (if phone ask for the Pairing pin code) and press ok. A voice prompts “Pairing Successful, connected to phone” if BT F6 is successfully paired to phone and LED Status indicator (9) blinking blue twice every 2sec. Receiving Incoming Call: Answer Call: Short press PHONE button (4) to accept the incoming call. End Call: Short press PHONE button (4) to end the ongoing phone call. Reject Call: Short press ON/OFF or PAIRING button (1) to reject the incoming call. Volume UP: Press VOL+ button (7) to increase ongoing phone call audio volume level. High beep will be heard if reach to maximum level. Volume DOWN: Press VOL- button (8) to decrease ongoing phone call audio volume level. Low beep will be heard if reach to minimum level. Phone Call Audio Transfer: Long Press PHONE button (4) for about 3 sec. or after the 2 nd beep to transfer ongoing call audio from headset to phone or phone to headset. A2DP Music Streaming: Play/pause music: Short press MUSIC button (2) to play or pause the music streaming. Select next song: Press UP button (6) to select next song you wanted to play. Select previous song: Press DOWN button (5) to select previous song you wanted to play. Increase Music Volume: Press VOL+ button (7) to increase music volume level. High beep will be heard if reach to maximum level. Decrease Music Volume: Press VOL- button (8) to decrease music volume level. Low beep will be heard if reach to minimum level. Note: With some phones, you may need to manually play via Bluetooth on your phone to start streaming music on BT F6. FM Radio: Play/Pause FM Music: Short press FM button (3) to play or pause FM music. Scan Up FM Station: Press UP button (6) to scan up FM station. Scan Down FM Station: Press DOWN button (5) to scan down FM station. Saved Fm station: a.) Long Press FM button (3) for about 2 sec. to saved FM station and voice prompt heard "UP/Down memory selection, then Short press FM". b.) Press UP (6) or Down (5) button to select desired memory you want to save then Short press FM button (3) to successfully save FM station. Select Saved FM Station: Long Press UP (6) or DOWN (5) button for about 2 sec. to select Saved FM station. Increase FM Music Volume: Press VOL+ button (7) to increase FM volume level. High beep will be heard if reach to maximum level. Decrease FM Music Volume: Press VOL- button (8) to decrease FM volume level. Low beep will be heard if reach to minimum level. Charging: Connect the charger’s plug to the Charger Port (10) of the BT F6. Then connect the charger to an external power source. LED Status Indicator (9) Status: Steady Red: Charging Steady Green: Battery Full When fully charged, disconnect the charger To prevent possible hearing damage, do not listen at high volume levels for long periods. Operating temperature : 0-45°C Charging temperature: 5-40°C DC input : 5VDC 1.2A Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems). This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling.Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal. This product has an embedded, non-replaceable battery, do not attempt to open the product or remove the battery as this may cause injury and damage the product. Please contact the local recycling facility for removal of the battery. The embedded, nonreplaceable battery is designed to last the life time of the product. FCC/IC statements : Federal Communications Commission (FCC) Statement Industry Canada (IC) Statement 15.21 You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment. 15.105(b) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC/IC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures : -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. This device complies with Industry Canada licence-exempt RSS standard(s) Operation is subject to the following two conditions : 1)This device may not cause interference and 2)This device must accept any interference, including interference that may cause undesired operation of the device. FCC/IC RF Radiation Exposure Statement : This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by EuroCB is under license. Other trademarks and trade names are those of their respective owners. English Hereby, Hereby, Euro CB Phils inc, inc, represented by MARCHANT, MARCHANT, CEO, CEO, declares that the MODEL BTF6, BTF6, is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC 1999/5/EC of the European Parliament and of the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual recognition of their conformity. conformity. For the whole declaration please visit : http://www.SuperTooth.net/download Euro CB Phils inc SFB2, MEPZ1 6015 Lapu-lapu city Cebu Philippines NCC Statement: 根據低功率電波幅射性電機管理辦法規定: 第十二條: 經型式認證合格之低功率射頻電機，非經許可，公司、行號或使用者均不得擅自變更頻率，加大功率或變更原設計之特性及功能。 第十四條: 低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立即停用，並改善至無干擾時方得繼續使用。 低功率射頻電機須忍受合法通信或工業、科學及醫療用電波幅射性電機設備之干擾。
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Author : Nova Create Date : 2016:03:14 15:16:48+08:00 Modify Date : 2016:06:10 10:27:47+08:00 Language : en-US XMP Toolkit : Adobe XMP Core 5.6-c015 84.158975, 2016/02/13-02:40:29 Format : application/pdf Creator : Nova Title : INTERPHONE F6 Creator Tool : Writer Metadata Date : 2016:06:10 10:27:47+08:00 Producer : LibreOffice 5.0 Document ID : uuid:cf928675-8fa4-4ddd-a971-ec21132ba054 Instance ID : uuid:59d9709a-0bb7-4180-971a-e2b841e2c254 Page Count : 6EXIF Metadata provided by EXIF.tools