Eve Systems SMA-002 BMW Keyfinder User Manual

Elgato Systems LLC BMW Keyfinder

User manual

Page 1 of 12
ULTRA CREATION LIMITED
BMW Keyfinder
PCBA
(Bluetooth locator)
(82 29 2 405 851)
Page 2 of 12
USER MANUAL
注意事项/NOTES
在使用本产品之前请先仔细阅读本手册，以便合理安全的使用本机器。
Please read the manual carefully before using this product to be a
reasonable safe use of the machine.
目录/Contents-------------------------------------------------------------------------------------- 2
注意事项/Notes-------------------------------------------------------------------------------------------2
一、面板按键操作及功能/Panel button operation and function -------------------------3
二、主图标/Main icon-----------------------------------------------------------------------------------4
三、APP 软件功能操作/The App software function operation----------------------4-12
Page 3 of 12
一、面板按键操作及功能 /
Panel button operation and function
无 N/A
二、主图标/Main icon
三、APP 软件功能操作/The App software function operation
1、Click Smart Key APP icon to start searching for smart key.
1.1 iOS system turn on Bluetooth and start searching for smartkey
Turn on Smart
Key APP, iOS
device search
for Smart Key.
Click cancel
to stop
searching
Page 4 of 12
1.2 If Bluetooth is not turn on, it will show below page when you turn on Smart Key APP
Click help
when it was
needed
Follow the
instructions on
screen
Page 5 of 12
2、Searching and conneting
`
Follow the
screen
instructions
Setting
Record of device
connected and
disconnected time and
location
Operation
page
Page 6 of 12
3、Using the map .
4．Setting.
Click“Connected”，
“Added”will enter
Map and shows the
recorded location
Click
setting
Connected
location
will be
shown on
the map
Page 7 of 12
4.1 Set “Profile”.
Click Profile
Page 8 of 12
Page 9 of 12
4.2 Set “Sounds & Notifications”.
Set Sounds
&Notifications
of smartkey
Set iphone’s
Sounds
&Notification
Page 10 of 12
4.3 Set Do Not Notify, check Smart Key battery, App version and turn on/off Smart Key.
Turn On/off
Smart Key
Delete Smart
Key
Battery level and
app version
Safe zone
Add
zone
On/off
Safe zone
setting。
Page 11 of 12
4.4 Setting “Appearance”.
5、Function Introduction of “Elgato Smart Key”.
Back icon
about
Define Smart
Key name
Define Smart
Key image
Choose from picture
folder
Choose form Smart Key
APP built in picture
Take new photo
Tell a
friend
User
instructions
Page 12 of 12
6、Operate any “Smart Key “in “Smart key” list on APP.
7、Add“Smart Key”.
Follow the
instructions on
screen
Click one
of the
connected
device
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
NOTE 1: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
NOTE 2: Any changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user's authority to operate the equipment.
IC STATEMENT
This device complies with Industry Canada licence-exempt RSS standard(s): Operation is
subject to the following Two conditions:(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause
undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils
radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1)
l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter
tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en
compromettre le fonctionnement.

Navigation menu