Evenflo 900646RTRIA 900MHz Transceiver User Manual 85 924 001 Eng

Download:
Mirror Download [FCC.gov]
Document ID	446487
Application ID	vPf1eGOCosSZEH9DN4IEaQ==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	207.54kB (2594271 bits)
Date Submitted	2004-07-03 00:00:00
Date Available	2004-07-03 00:00:00
Creation Date	2004-06-01 10:41:16
Producing Software	Adobe PDF library 4.800
Document Lastmod	0000-00-00 00:00:00
Document Title	85-924-001(Eng).pdf
Document Creator	Adobe Illustrator 9.0.1

WhisperConnectTWI Trial”I
900 MHZ ursery Monitor —
way Walkie4alkie
frnporurru- Read and keep these irrsiriiaobrrs for farm ic/crerrc-c
Thank you for purchasing the Evenfio WhisperConnect Nursery Monitor if you have any
quesuons or problems with your Evenflo WhisperConnect Nursery Monitor please do not
return it to the store, oall Evenfio’s Parenttink at 1—800-233-5921, Monday through rnday
boo AM to 7.00 PM EST
Model Number. Your vvhisperconnect Tria Nursery Monitor model number is 6461600
- ntll'nlc-
- www.evenfio,com
@/ - USA or Canada l—sooezase592i
use “can.” - México' 0143007064200
Ut Listed Adapter rcc Approved
AWARNING
- DO NOT OPEN. N0 USER SERVICEABLE PARTS INSIDE. RISK
OF ELECTRIC SHOCK. MAY CAUSE INIURY, FIRE, OR DEATH.
O DO NOT use near water.
' DO NOT place furniture on cord.
- NEVER place the baby’s unit or its adapter in the crib or playpen, or
within the child’s reach.
- DO NOT hang this monitor near or on a crib. The cord can present
a strangulation hazard.
- Always keep the unit out of children’s reach.
- DO NOT use this monitor if it is broken or parts are missing.
' This product is designed and intended to be used solely to monitor
the actions of a sleeping child.
O DO NOT use this monitor With products that warn the user: ”NEVER
LEAVE CHILD UNATTENDED.”
- This product does not replace responsible adult supeersion of a child.
- You should check your child regularly as this product Will not detect
your child’s quiet activities.
- This product is not intended to be used as a medical monitor, and its
use should not replace adult sUpen/lsion.
- Make sure the Parent's and Baby’s Units are functioning properly, on
the same channel, and Within reception range of each other.
- It is essential to check the sound reception regularly.
mportant Safety nstruct ns
The Evenflo WhisperConnect Nursery Monitor should Nor be used as a replacement for adult
supervision of children Please note that any modification to the babys UnilorPaient‘s Unitwiil
will violate rcc compliance and can void the users authonty to operate this monitor set,
1. Read and observe all warnings on the product and in this Owner‘s Manual Pay special
atlenuon to lnlormatlon marked ’WARNiNG” and ”iMPORTANT." This informauon can affect
your child’s safety Keep this Owner‘s Manual nearbyfor quick and easy reference
2. Avoid placement near water or moisture D0 Nor use Baby’s Unit oumoors. be nor use
your monitor near a bathtub, shower, sink laundry tub, svvimming pool, wet basement or
other locations where water or moisture may result in electrocution
3. Allow for proper ventilation of the adapters and the monitors DO NOT place your monitor on
or under a rug, bed, sofa, blanket or similar obyect that blocks its ventilation. DO Nor place It
in a builtcin installation such as a bookcase or stereo cabinet These may impede the air flow
through the venulauon openings
4. Remove the batteries from the monitor components and unplug the Ac adapters if the
monitorWlli not be used for a long period of time
5. Avoid placement near heat sources be nor use your monitor near a radiator, stove, heat
register, or other appliance nncluding amplfrers and W’s) that produce heat heat can damage
the case or components
6 The Baby’s Unit is operated by a hardwired (noncfemoveable) AC adapter Do Nor
attempt to remove the AC adapter, doing so can affect your safety The Parent‘s Unit is
operated by rechargeable batteries that are included with your monitor or by the Evenflo Ac
adapter (provided). Use only the Evenflo adapter included With this unit D0 Nor use this
adapter With other equipment or use other equipments’ adapters With this monitor under
any circumstances
7. Protect the AC adapter cards Route cords so they are not walked on, pinched by items
placed upon them, or run-over by vacuum cleaners
8. Do Nor immerse any component In water clean the monitor With a dry cloth
9 Do NOT use near fluorescent lights, appliances with motors, televisions, fans or other
machinery. These items may intenerc with the quality of your monitor‘s transmission or
reception.
luAdapter must be removed from the receiver for battery operation
11 DO NOT use the monitor if:
' Either adapter cord has been damaged
Ob|ects have fallen onto or liquid has been spilled into any of its components
- it has been exposed to rain or water
- it has been dropped or something inside is damaged
A If any pans are missing or broken, call Evenflo's Parenttink at 1750072115911 for
instructional literature or product information if needed
12 Refer to the Troubleshooting Chan in this Owner’s Manual before returning your monitor
for servicing. You may be able to solve the problem on your own in very little time
13.There are no sewiceabie pans inside these monitors DO NOT open the cases
14 This device complies with part is of the rcc rules Operation is subyect to the following tw o
conditions (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation
H fu Hints
- For best routs, use yourAc adapter(s) vnth the monitor The power is more consistent than
that of the battery
- ror best battery performance, allow batteries to completely discharge every few weeks
- This nursery monitor operates over public airwaves Transmissions from your Baby’s Unit may
be picked up by another product operating on the same frequency Your Parent’s Unit may
also pick up transmissions from another product on the same frequency if interference
occurs, change BOTH your Baby’s and Parent’s Units to the alternate frequency channel.
- Always make sure that both units are on the same frequency channel. It is possible for the
Parent‘s Unit to pick up the Baby's Unit even f they are not on the same channel when both
units are close together, however, you’ll expenence static and interference
- Charge your Parent units approximate ‘i2 hours forfirst use or the Parent Unit is not used for
AWARNING
Changes or modifications to this unit not expressly approved by
the party responsible for compliance could void the user‘s authority
to operate equipment.
note; This equipment has been tested and found to comply with the limits fora Class b
digital device, pursuant to part iS of the rcc rules, These limits are designed to provide
reasonable protection against harmful interference in a residential installation This
equipment generates, uses and can radiate radio frequency energy and if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications
There is no guarantee that interference will not occur in a particular installation If this
equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment of and on, the user is encouraged to try to correct the
interference by one or more of the following measures
- Reorient or relocate the receiinng antenna
- increase the separation between the equipment and Parent’s Unit
- Connect the equipment into an outlet on a circuit that is dfferent from the Parent’s Unit
- Consult the dealer or a qualified radio-TV technician for help
- Ac adapter can only be used under voltage between low-120V, SO-60HL
Features
Operational Range: Your monitor‘s typical transmission/reception range is 650 feet (i 98 rn)
depending on battery power and possible obstructions (e g, walls) that radio waves encounter The
methods and materials used in your home's construction, terrain and other factors may also affect
transmission,
power- 1 g :The Power tight will illuminate green whenever the unit is turned on, whether the
unit is stationary (plugged into adapter) or portable (using battery power)
Channel NB: if lnlerlerence occurs, change BOTH your Baby's Unit and Parent's Unit to the
alternate frequency channel The WhisperConnect Nursery Monrtor opentes over public airvnves
Transmission from your Baby’s Unit may be picked up by another product f it is on the same
frequency Your Parent’s Unit may also pick up transmission from another product if it is broadcasting
on be same frequency
sound Lighu‘": Sound Lights light up when the Parent’s Unit receives sounds The more lights that
are lit the louder the sounds
Loiw Inna-y Indlcttor: When battery power in the Parent's Unit is iovv, the Power Light/Low
Battery indicator will flash To recharge, attach the Ac adapter to the Parent's Unit, plug the Ac
adapter mm a standard wall outlet, then set Power/Volume Dial to ON
out-of-iiange indicator and Alarm: All sound tightsW Will light up and flash, and an aim Will
sound on your Parents Unit i
' The units are taken out of range at one another. ' The units are set m different channels
- Power to the babys Unit is lost - A strong interfering signal starts on the selected channel.
The Out—ofckange indicator and Alarm can only be stopped by reestablishing contact between the
two units or by turning off the Parent’s Unit This alarm feature is designed to give you confidence
and reassurance that your Evenflo WhisperConnect Nursery Monitor is functioning property
Parent Unit Flnden Press the Patent Unit Finder Button on Baby‘s Unit to activate the locating
Signal, Once the Parent’s Unit is located, turn Power Switch OFF then ON tO deactivate the signal,
Additional Parent Unit: You may expand WhisperConnect capacity by adding additional parent
unlls (sold separately) Use only Evenllo WhisperConnect Additional Patent Unit: model 6461650 to
this monitor system Please consult the owner‘s manual included with the additional paimt units for
expand warning and safety instructions
Usin Your Monitor
The Baby’s Unit
Parent Unit Finder Button
Power/volume Dial
Anten na
Power tight
Microphone
hannel sWitch
Speaker
The babys Unit primarily sends sounds to the Parent’s Unit When used as a walkietalkie it
can also receive sounds. it is powered by a hardwired (non-removable) AC adapter.
1. Place the Baby’s Unit on a hard flat surface 5 to in feet away from the baby DO Nor place
it on a soft surface of it may tip over
2. Direct the front of the Baby’s Unit towards the baby be sure that there aren’t any large
objects blocking the path between the Baby’s Unit and the baby.
3. rully extend the cord, and plug the adapter into a smndard electrical ouUet
4. Tum on the Baby’s Unlt by rotating the Power/volume Dial, adyust the volume The Power
tight will glow green
5. Slide the Channel switch to Channel A or b Ensure the Baby’s Unit is set to the same
channel as the Parent’s Units
6. When receiving sounds from the Parents Unil. have someone listen to the babys Unit to
check volume level Adlust as necessary
7 Turn the babys Unit orr when not in use.
I,
Talk and Listen to Baby. Talk and Listen to Baby
it 1,
Talk to Each
‘ other without a
Disturbing baby.
The Parent“: Unit
Antenna
Ac Adapter Sound tights
Power Light/
at Talk Low battery indicator
fig Button
fie? Power/Volume Dial
\ Channel
much
The Parent’s Unlt receives sound from the Baby’s Unlt aid is powered by either rechargeable
batteries (already in the unit) or by theAC materiidudod With the unit
To Use as Monitor
1, Ensure Parent’s Unit is charged To charge, connect Ac adapter (provided) to Parent's Unit
and plug into standard wall outlet To charge while monitoring, set PowerNoiume Dial to
ON Afull charge requires 12 continuous hours.
1 Check the channel SWltch Ensure the Baby: Unit is set to the same channel as the
Parent's Unit,
3. Use the Parent’s Unlt In a dflerent room train the BabYs Unit
4 Place the Parent's Unit where you can easiiy monitor it by sight or sound
. When using the adapter, plug it into a standard wall outlet.
- When using batteries, wear the Parents Unit using the belt clip or place It where you can
easily see or hear it
5 Turn on the Parent’s Unit by rotating the Power/Volume Dial, adjust the volume The
Power tight will glow green if the Power tight flashes, it indicates that battery power is
low and Parent's Unit needs to be recharged NOTE: All sound Lighnw will light up and
flash on the Parent’s Unit if it is not properly receivtng signals from the BabYs Unit
5 Have someone speak into the Baby’s Unit to verify sound transmission
7 Turn the Parent's Unlt OFF when not in use
To Use as Wa talkie:
1.5et both Parent’s and Baby’s Units channel switches to same channel (either A or B)
2 Set all Power/Volume Dials to ON and adjust the volume
3, Hold Parent's Units i2 7 TS inches tram mouth
4. Speak from Parents Unit to another Parents Unit, piss and hold the bottom oftheTalk
button being speaking when hearing a beep tone at speakertrwo beep tone means the
connection is unsuccwful and need to press the Talk button again)
5. Speak from Parents Unitto Babys Unit, press and hold the top ofthe Talk Button, being
speaking when hearing a beep tone atspeakernwo beep tone means the comedian is
unsuccessful and need to pm the Talk button again)
6. Speak from Parents and Baby’s Units, press and hold both top and bottom ofthe Talk
button. being speaking when hearing a beep tone at speakernwo beep tone means the
connection is unsuccessful and need to press the Talk button again)
7 When speaking to babys Unit have someone listen to the Baby’s Unit to check volume
level Adjust as necessary
BrTurn the Parent's Unit OFF when not In use
Troubleshooting Guide
NOTE: If, after checking all of the solutions below, you believe that your WhisperConnnect Parent/Baby Unit is damaged, please call Parenttlnk at 1-800-233-5921.
Pitonth PossIBLE (Ausc
sotunon
Power bght isn’t working. Unit isn't getting power
- Make sure born units are propeny plugged into the wall and the outlet is
switched on
' Make sure both [he Parent's Unit and the Baby/s Unit are set to the same channel.
- Recharge battery by atmchfng the Ac adapter and plugging it into an outlet
Reception is poor due to
sbtic, bumng or
interference
- Other household appliances, cordless phones, fluorescent lights
or motors may be disrupting the signal
- Parent's Unit may be out of effective range.
- Battery isweak
- Turn off, unplug or move the device that is causing the problem
' Move the Parent’s Unlt closer to the Babys Unlt
- Recharge battery by attaching the AC adapter and plugging it into an outlet
All sound tights flash and
alarm sounds (Parent‘s
Unlt only)
- Parent’s Unit is outside the transmission range of the Baby’s Unit
- Baby’s Unit and Parent’s unit are on different channels
- babys Unit is not turned on, or not plugged into a working outlet
- Battery in Parent’s unit is weak
- Move Parent’s Unit closer to the babys Unit
' Make sure that both units are set to the sarne channel
' Turn the Power SWltch on the Baby's Unit to the ON pOSitlon
- check the Ac outlet to be sure it is working
- Recharge battery by attaching the AC adapter and plugging it into an outlet
Power Lightflashes
(Parent’s Unit only)
battery is weak
Recharge battery by attaching the Ac adapter and plugging it into an outlet.
Parent’s Unit is making a
loud leedback nelse.
- Baby’s Unit is picking up sounds from the Parent’s Unit because
they are too close to each other
- Volume may be set too high.
- Move the Parent’s Unit at least lo feet away from the babys Unit
' Lower the volume.
Parent’s Unit is picking up
sounds or sutic from
outside your home
A neighbor has a similar baby monitor, cordless phone or
walkie talkie that is transmitting sounds on the same
frequency channel
change the frequency channel that is in use, be sure to change the channel on boTH units.
Limited Wnrrlnty
ror a period of so days from the original purchase of this Product Evenno warrants to the original end user
(“Purchaser > this Product (including any accssones) against delem in material or workmanship Evenl'lo’s
solo obligation under this eaprcss lirnitcd wananiy shall be, at Eventlo‘s opuon, to repair or replace any
Product that is determined to be defective by Evenflo and determined to be covered by this warranty
Repair or replacement as provided under this wananty is the exclusive remedy of the Purchaser Proof of
purchase iii the fomi ora receipied invoice or bill of sale evidencing that the Product is within the warranty
period must be proented to obtain warranty service This express limited warranty is extended by Evenno
ONLY to the original Purchaser of the Product and is not assignable or transferable to subsequent purchasers
or end users of the Product rorwananty service, connct Evenfio’s Parerrttink Consumer Resource Center at
(m) 233. 5921 or warmer-flown.
ExCEPT To THE ExTENT PRorllblTED bY APPLICABLE tAw, ANY lrvatlED WARRANTY or
MERCHANTABiLiTV OR FiTNEsS FOR A PARTiCULAR PURPOsE ON Trlls PRODUCT is HEREBY
DisCLAiMED EvENrto sHAtt Nor bE LiABLE roR ANY iNCiDENTAL coNsEQUENnAt, sPEclAt oR
PUNlerE DAMAGES Or ANY KiND rOR BREACH or TrlE EXPREsS thlTED WARRANTY ON THls
PRoDUcT, OR ANY WARRANTY lMPtlED bv oPERATtoN or LAW OTHER THAN THE ExPREss
urvflTED WARRANTY st‘r roRTH ABOVE, THERE ARE No OTHER WARRANTlEs TrlAT AccorvaANv
THls PRODUCT AND ANY ORAL, WRlTTEN OR ANY OTHER EXPRESS REPREsENTATloN OF ANY KIND
is HERERV olsctAirvaD
©Evenflo Company, Inc 2004 75700002 4/04

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Create Date                     : 2004:06:01 10:41:16+08:00
Creator                         : Adobe Illustrator 9.0.1
Producer                        : Adobe PDF library 4.800
Title                           : 85-924-001(Eng).pdf
Creator Version                 : 9
Container Version               : 9
For                             : Solar Wide , Solar Wide
Bounding Box                    : -284 21 879 821
Page Count                      : 1

EXIF Metadata provided by EXIF.tools