Eventide Stereo System 141045 Users Manual Eclipse User

2015-02-06

• The How’s and Why’s of This Manual
• The Big Picture – A Must Read
• Knobs, Keys, and Jacks
• The Front Panel
• The Back Panel
• Getting Around and Altering Parameters
• The “Areas” (e.g. – Levels, Program, Setup, etc.)
• Understanding the Display and Soft Keys
  • • The Bottom Line of the Display
    • The Top Line of the Display
• Altering Parameters
• Quickstart
• Hooking Up To the Outside World
  • • Analog Connections
    • Digital Connections
• Altering the Effects
  • • Tempo
    • Tempo-Controlled Parameters: T_DELAY, T_RATE, etc.
• Tutorial 1: Loading a Program, Setting the Tempo, and Assigning Modulation
• Tutorial 2: Creating a Program “from Scratch” and Assigning a Hot Key
• Mounting and Handling
• Memory Cards
• The Display Brightness and Click Features
• Global Signal Flow and Levels
• Using the Meters
• Input Mode (Global Stereo or Global Mono?)
• Global Wet/Dry Mix
• Global Levels
• Bypassing and Muting
• Digital Setup
• Digital Input
• Internal and External Clock Source
  • • Using Higher Sampling Rates Disables Some Programs
• Digital Output
  • • ADAT Output or Two-Channel Optical Output?
• Program Operations - Load, Save, Remove, etc.
• Sorting and Loading Programs
  • • Loading Programs From MIDI and Using MIDI Maps
• Saving and Updating Programs
  • • Saving Programs
    • Updating Programs
    • User Groups
• Removing Programs
  • • Removing ALL Your Saved Programs
    • Checking free space in internal memory or a card
• Naming Things – The Mechanics
• Parameters
• Hot Keys
  • • Assigning Hot Keys
    • Renaming Hot Keys
    • Deleting Hot Keys
• Altering Parameters in the PARAMETER Area
  • • Master Parameters: M_LEVEL, M_DELAY, M_FBACK, etc.
    • Tempo-based Parameters: T_RATE, T_DELAY, T_TAP, etc.
    • Envelope-following Parameters: SENS, ATTACK, and DECAY
    • LFO Parameters
    • Sends and “Manual” Parameters
• Routing and Levels Between Effects Blocks
  • • Routing
    • Wet/Dry Ratio
    • Output Level
    • Bypassing Effects Blocks
• Loading Different Algorithms into Effects Blocks
• Modulating Parameters Via the modulation block: LFO, ADSR, Envelope, MIDI, Pedals, and More
  • • Patching a Parameter to the Modulation Block’s “Modules”
    • Scaling Modules and Selecting Modulation TYPE
• Setting Up the Modulation Block
  • • The Modulation Block
• More on modulation
• External Controllers
• Dedicated External Controllers
• MIDI Setup
  • • The Rear Panel Pedal Jacks
• Storing and Loading Setups
• Utilities
• Transmitting and Receiving Data via the Serial Port
• Dumping Data Via the MIDI and Serial Ports
• Fixing and Initializing Internal Memory
• Fixing Strange Behavior, Freezes, Etc.
• Formatting Memory Cards
• Updating Software
  • • Creating an “Upgrade Card”
    • Updating with a Memory Card
    • Installing OUpdate
    • Upgrade via the OUpdate Application
    • Finding Out The Current Software Version
• Approved Compact Flash Cards
  • • Sample Rates
    • Frequency Response