Ever Sparkle Technologies KTW029 2.4GHz receiver User Manual

Download:
Mirror Download [FCC.gov]
Document ID	4207303
Application ID	ppxyKaNZL2IG0mOBACCUxQ==
Document Description	user manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	9.79kB (122412 bits)
Date Submitted	2019-03-19 00:00:00
Date Available	2019-03-19 00:00:00
Creation Date	2019-03-12 15:30:48
Producing Software	Acrobat Distiller 11.0 (Windows)
Document Lastmod	2019-03-14 11:21:43
Document Title	Microsoft Word - Controller operation procedure - Rev Oct 08 2018
Document Creator	PScript5.dll Version 5.2.2
Document Author:	Administrator

Ever Sparkle Technologies Limited
Controller Instruction Manual
A.
Below is the Control button layout drawing
B.
How to operate the buttons
1. [Power/OK] button
i. Press once to power on the controller. The default setting of turn off time is 15 minutes. The unit will be
turned off as per the Timer setting.
ii. To turn off the controller when timer has not been reached, press and hold the [Power/OK] for 3 seconds.
iii. Use [Up] / [Down] buttons to adjust the power level. There are total 5 levels can be set.
Remark: When reaches to level 5 and press the [Up] button, the level 5 LED will be flashed with 0.5 sec
interval. When reaches to level 1 and press the [Down] button, the level 1 LED will be flashed with 0.5 sec
interval.
When the temperature has been raised to a comfortable level, press the [Power/OK] button once to fix the
temperature.
Question: ‐ How to operate on App?
iv. The temperature set by above item ‘iv’ will be released when [Up] or [Down] button is pressed.
v. The temperature set by above step ‘iv’ will be stored in the memory. When the unit has been powered on
again without pressing the [Up]/[Down] buttons, the same temperature setting will be applied.
vi. The maximin temperature will be set at 50 degrees C.
vii. To further increase the temperature to above 50 degrees, press and hold the [Up] button for 5 seconds.
viii. The temperature will not be increase when reaches 60 degrees C.
2. Down button
Each press on the button will reduce the power by one step.
3. Level Indicator (LEDs)
To indicate the power level.
4. Up button
Each press on the button will increase the power by one step.
5. Timer button
i. Default is 15 minutes when power on.
ii. Press once to switch to 30 minutes.
iii. Press one more time to switch to 60 minutes.
iv. When pressing the Timer button continuously, it will be cycled between 15 minutes to 60 minutes.
End
FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
Note 1: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
—Consult the dealer or an experienced radio/TV technician for help.
Note 2: 1.Changes or modifications to this unit not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
2. The minimum separation generally be used is at least 20 cm.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : No
Author                          : Administrator
Create Date                     : 2019:03:12 15:30:48+08:00
Modify Date                     : 2019:03:14 11:21:43+08:00
XMP Toolkit                     : Adobe XMP Core 5.6-c015 81.157285, 2014/12/12-00:43:15
Producer                        : Acrobat Distiller 11.0 (Windows)
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2019:03:14 11:21:43+08:00
Format                          : application/pdf
Title                           : Microsoft Word - Controller operation procedure - Rev Oct 08 2018
Creator                         : Administrator
Document ID                     : uuid:8e9e45fa-4a69-4c60-8d65-58bff63a2c12
Instance ID                     : uuid:e7b5c171-1e47-4e58-a282-31d3304a399a
Page Count                      : 2

EXIF Metadata provided by EXIF.tools