EverPro Technologies EPU3D-001 SuperTT Dongle User Manual EPU3D02 20140625 fcc caution
EverPro Technologies Company Ltd. SuperTT Dongle EPU3D02 20140625 fcc caution
EPU3D02 User Manual-20140625_fcc caution
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2322597 |
| Application ID | 99dQ0eCCxB6024g5Dt7kUQ== |
| Document Description | EPU3D02 User Manual-20140625_fcc caution |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 36.29kB (453631 bits) |
| Date Submitted | 2014-07-11 00:00:00 |
| Date Available | 2014-07-13 00:00:00 |
| Creation Date | 2014-06-25 15:49:27 |
| Producing Software | Adobe PDF Library 9.0 |
| Document Lastmod | 2014-06-25 15:49:31 |
| Document Title | EPU3D02 User Manual-20140625_fcc caution |
| Document Creator | Acrobat PDFMaker 9.0 Word 版 |
| Document Author: | Administrator |
SuperTT Dongle User Manual SuperTT Dongle EPU3D02ARSM 2013-12-27 Revision 0.85 EverPro Technologies Company Ltd. www.everprotech.com EverPro (Beijing) R&D Center VIA Building, Tsinghua Science Park Building 7 Haidian District Beijing, China 100084 Email：LewisZhang@everprotech.com -1- SuperTT Dongle 1. Introduction EPU3D02ARSM is a new-generation USB 3.0 dongle integrated with U3TT technology designed by VLI Beijing System Product Division. EPU3D02ARSM can convert the USB 2.0/1.1/1.0 devices connected on the downstream port to USB 3.0 devices, allowing these USB 2.0/1.1/1.0 devices to use the upstream SuperSpeed signal path. EPU3D02ARSM can use only SuperSpeed path on the upstream facing port when connected to USB 3.0 host, so it is easy to use Active Optical Cable (AOC) to extend the transmission distance of USB 2.0/1.1/1.0 devices to more than 100 meters. Feature List • The downstream and upstream ports are compatible with USB 3.0 standard • Plug & Play support • No need for driver • Single 5Vpower supply, self-power • Downstream and upstream port with USB 3.0 Standard-A receptacle • Upstream port supports USB 3.0 AOC and active power supply for USB 3.0 AOC • Upstream port can connect to USB 2.0/3.0 host/hub • Downstream port supports USB 3.0/ 2.0 devices/hubs • In system firmware upgrading support • Energy-saving mode supported • Double-color LED for state indication 2. Product Specification Port Definition -2- SuperTT Dongle 1. USB 3.0 downstream facing port 2. USB 3.0 upstream facing port 3. 5V DC Jack 4. Dongle status double color LED 3. Hardware Setup EPU3D02ARSM can be powered by external DC only. The external DC adaptor should have capacity to provide more than 1.2 amperes. The upstream port should be connected to the host/hub using standard A-A USB 3.0 cable or AOC. 1) Connect USB device to dongle downstream port. 2) If the USB device is self-powered, connect the external power of the device. 3) Connect the standard USB 3.0 A-A cable to the USB 3.0 host (or hub). 4) Connect the standard USB 3.0 A-A cable to the upstream port of the -3- SuperTT Dongle dongle. 5) Connect the external +5V DC power of the dongle. Notes: the sequence of the steps is irrelevant. 4. Troubleshooting Guide 1. Device could not be enumerated by host Checking items listed below to clear this issue. a. Check your hardware, make sure it is setup as described in this guide b. Check if USB 3.0 hub and USB 2.0 hub have been enumerated c. Check your USB device and host, make sure they works normally d. Check the power, make sure the voltage is 5V and the green LED of the corresponding port is off e. Check the self-powered USB device power, make sure it is turn on f. Re-power the dongle, make sure the red LED flash twice. If not, the firmware or hardware may be broken. 2. Device does not work in USB 3.0 Mode a. Check you host, make sure it is a USB 3.0 host and is not disabled b. Check your cable between host and dongle, make sure it is a qualified USB 3.0 cable c. Check the USB Hub between host and dongle, make sure it is a USB 3.0 Hub and is not disabled d. Check if the USB 3.0 hub and USB 2.0 hub has been enumerated by the host 5. Frequently Asked Questions (FAQs) • Q: Can I connect USB 3.0 device on the downstream port? A: Yes. If you connect USB 3.0 device on the downstream port, the SuperSpeed signals will not transmit through the SuperTT but directly to the -4- SuperTT Dongle USB 3.0 hub IC. • Q: What should I do if the devices are very far away from the host? A: If the distance between the devices and host is more than 7m, it highly recommended using AOC on the upstream port. The length of AOC can be up to 100m. • Q: How should I choose the adapter for EPU3D02ARSM? The DC adopter should have the capacity to output more than 1.2 amperes to provide enough power on the downstream port. Otherwise some power hungry devices such as USB hard disk diver will not function properly. EverPro Technologies Company Ltd. www.everprotech.com Copyright © 2014 EverPro Technologies Company Ltd. All Rights Reserved. No part of this document may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise without the prior written permission of EverPro Technologies Company Ltd. The material in this document is for information only and is subject to change without notice. EverPro Technologies Company Ltd. reserves the right to make changes in the product design without reservation and without notice to its users. All trademarks are the properties of their respective owners. No license is granted, implied or otherwise, under any patent or patent rights of EverPro Technologies Company Ltd. EverPro Technologies Company Ltd. makes no warranties, implied or otherwise, in regard to this document and to the products described in this document. The information provided by this document is believed to be accurate and reliable as of the -5- SuperTT Dongle publication date of this document. However, EverPro Technologies Company Ltd. assumes no responsibility for any errors in this document. Furthermore, EverPro Technologies Company Ltd. assumes no responsibility for the use or misuse of the information in this document and for any patent infringements that may arise from the use of this document. The information and product specifications within this document are subject to change at any time, without notice and without obligation to notify any person of such change. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. -6-
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes Author : Administrator Create Date : 2014:06:25 15:49:27+08:00 Keywords : VT3503, VL670, Dongle Modify Date : 2014:06:25 15:49:31+08:00 Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00 Metadata Date : 2014:06:25 15:49:31+08:00 Creator Tool : Acrobat PDFMaker 9.0 Word 版 Document ID : uuid:8828f1dd-ebaa-474e-b05c-681b581323c1 Instance ID : uuid:a05338e1-e309-448b-b60c-357eea416395 Subject : 3 Format : application/pdf Creator : Administrator Producer : Adobe PDF Library 9.0 Source Modified : D:20140625074646 KSO Product Build Ver : 2052-9.1.0.4555 Page Layout : OneColumn Page Count : 6EXIF Metadata provided by EXIF.tools