Everspring Industry Co TSA04 Smart Keypad User Manual KPD800 UserMan

Everspring Industry Co Ltd Smart Keypad KPD800 UserMan

UserManual.wiki >

Everspring Industry Co >

TSA04 User Manual HTML Version

user manual

IrisSmartKeypad–QuickStartGuidev1.0

MattStratfold‐Monday,12March2012

InstallingyourIrisSmartKeypad

YournewkeypadneedstobeaddedtoanIrissystem.Followtheinstructionsbelowdependingon

whetherthisisanupgradetoanexistingsystem,oryouareinstallingyourkeypadaspartofanew

Irissystem.

Donotinsertthebatteriesintoyourkeypaduntilinstructedtodosobytheonscreeninstructions.

AddingyourIrisSmartKeypadtoanexistingIrissystem:

1.LogintoyourIrisdashboardandclickthe‘devices’link.

2.Select‘adddevices’

3.Followtheonscreeninstructions

AddingyourIrisSmartKeypadtoanewIrissystem:

1.FollowtheinstallationguidethatwassuppliedwithyourIrisSmartHub.

2.Theonscreeninstallationprocesswillaskwhichdevicesyouhave.Makesurethatthe

keypadisselected.

3.Theonscreeninstructionswilldescribethestepstoaddyourkeypad.

Mountingandpositioning

Positionthekeypadinaconvenientlocation,insideyourhomeandnearanentrydoor.Usethe

enclosedscrewstoattachthemountingbrackettothewall.

SettingupaPIN

ThePINyouchosewhenIriswasinstalledisthedefaultPINforcontrollingyoursystem.Youcan

changethisPINonlineinIristheaccountpage.YoumayallocatePINsforfamilymembers,friends

andservicepersonnel;visitthe‘contacts’sectiononlinetodothis.Iriswillkeepalogofeachtime

oneofthesePINshasbeenused.

UsingyourIrisSmartKeypad

Theintruderalarmcanbesettosecureyourhomewhenyouleavebypressingandholdingthe‘on’

or‘partial’buttonsfortwoseconds.Thelightfortheselectedmodewillilluminateforafewseconds

toconfirmthemodechange.Dependinguponyoursettingsthekeypadmaybeepforashortwhile

beforebeingfullyset.Thispermitsyoutimetoleaveyourhomebeforethealarmisactive.

Thepanicalarmmaybetriggeredbypressingthe‘panic’buttonfortwoseconds.

ToturnyouralarmoffenteryourfourdigitPINandpressthe‘off’button.

YoumaycancelaringingalarmbyenteringyourPINandpressingthe‘off’button.

Settingsandwhichsensorsareassociatedwith‘on’or‘partial’modescanbeconfiguredintheIris

webservice.AfulldescriptionofthekeypadoptionsandsettingscanbefoundonlineintheIrisweb

service.

Yourkeypadcontainsaloudsirenthatwillringshortlyafteranintruderorsafetyalarmhasbeen

triggered.YoucanchangethealarmsettingsbyvisitingthealarmpagewithintheIrisservice.

ClassB:

FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

-Consult the dealer or an experienced radio/ TV technician for help.

CAUTION:

Any changes or modifications not expressly approved by the grantee of this device could

void the user's authority to operate the equipment.

Labeling requirements 

ThisdevicecomplieswithPart15oftheFCCRules.Operationissubjecttothefollowingtwo

conditions:(1)thisdevicemaynotcauseharmfulinterference,and(2)thisdevicemustacceptany

interferencereceived, including interference that may cause undesired operation.



Everspring Industry Co TSA04 Smart Keypad User Manual KPD800 UserMan

Everspring Industry Co Ltd Smart Keypad KPD800 UserMan

user manual

Navigation menu

Namespaces

Views

Navigation