Ewig Macao Commercial Offshore 217S53 Thermo Sensor Transmitter User Manual 5 2003 61

Download:
Mirror Download [FCC.gov]
Document ID	346824
Application ID	TjL55BmIVtNxwDeuICreQA==
Document Description	users manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	9.13kB (114084 bits)
Date Submitted	2003-08-10 00:00:00
Date Available	2003-08-10 00:00:00
Creation Date	2003-08-05 15:31:04
Producing Software	pdfFactory v1.57 (Windows Me Chinese(Taiwan))
Document Lastmod	0000-00-00 00:00:00
Document Title	八月 5, 2003 (61)
Document Creator	pdfFactory http://www.pdffactory.com
Document Author:	cee3

217853 User manual
BATTERY INSTALLATION
ar Lift Off the bracket stand of the RF remote sensor by releasing the 2 fixing snaps at the
bottom. then use a small Philips screwdriver to remove the battery cover screws.
b. Insert 2pm ofAAA size batteries according It: the “+“ and "-“ polarity marks shown in the
battery compartment.
c. Once the batteries are inserted. the sensor will automatically transmit temperature signal
to the main body at 30 seconds intervals. The sensor is also equipped with a reset button,
you can enforce the sensor to reset and then it will transmit again,
d. The outdoor temperature will be displayed on the lower part ofthe screen when the main
unit receives temperature signal(s).
RESET SWITCH
A reset switch reserves for abnormal cnmliiinn
DETACHABLElPROBE
a. In order to avoid freezing up of battery, when the outdoor temperature is below 10°C,
open the side cover of the RF remote sensor and insert the probe plugr Extend the 6 feet
probe cord, leave the probe sensor outdoor and place the remote sensor unit indoor
b. Besides overcomes the extreme low temperature, the detachable probe can also be used to
measure the temperature of water, Soil or other liquid
SPECIFICATION
Sensor without LCD Display-20°C to +50°C (-4“F to + lZZDF)
Detachable Outdoor Probe: -50°c to +70“C (58°F to + 158°F)
Transmission Range: 100 feet
Battery: DC 3V, ZXAAA size
Modifications not authorized by the manufacturer may void users authority to operate this
device
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installatiuu. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
nnmmunications. However, there is no guarantee that interfcrcncc will not occur in a
particular installation. If this equipment does cause harmful interference to radio television
reception, which can be determined by tuming the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures,
-- Reorient or relocate the receiving antenna,
-- Increase the separation between the equipment and receiverr
-- Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
-- Consult the dealer or an experienced radio/TV technician for help.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Title                           : 八月 5, 2003 (61)
Author                          : cee3
Creator                         : pdfFactory http://www.pdffactory.com
Producer                        : pdfFactory v1.57 (Windows Me Chinese(Taiwan))
Create Date                     : 2003:08:05 15:31:04
Page Count                      : 1

EXIF Metadata provided by EXIF.tools