Excelpoint Systems IBMM001-R Intelligent Baby Monitoring Mat (Parent Control Unit) User Manual UserMan PYQIBMM001 R

Excelpoint Systems (PTE) Ltd. Intelligent Baby Monitoring Mat (Parent Control Unit) UserMan PYQIBMM001 R

UserMan_PYQIBMM001-R

All Information and specification are subject to change without further notice
EXCELPOINT CONFIDENTIAL
Intelligent Baby Monitoring Mat
User Guide
iBMM
All Information and specification are subject to change without further notice
EXCELPOINT CONFIDENTIAL
About the Manuals
The iBMM comes along with the Quick Start Guide and this User manual.
• The Quick Start Guide explains basic set up and the operations of the iBMM.
• This User Guide explains all the features and functional use, enabling you to make full use of the iBMM and
troubleshoot potential operational issues.
iBMM
All Information and specification are subject to change without further notice
EXCELPOINT CONFIDENTIAL
IMPORTANT INFORMATION ON USAGE CONDITION
Read the instructions carefully before using the Intelligent Baby Monitoring Mat (iBMM).
The iBMM consists of a remote receiver IBMM001-R (Parent Control Unit) and wireless
baby movement monitoring mat IBMM001-T (mat).
DO NOT break the warranty seal of the mat packaging until you had tested the functionality of the mat and
Parent Control Unit with a new set of batteries.
Breaking the warranty seal constitutes acceptance of the product in working condition.
QUICK START FUNCTIONAL TEST
1. Insert fresh batteries into the battery compartments of the mat and Parent Control Unit.
2. Power on the mat and Parent Control Unit.
3. The display should indicate ‘-‘ scrolling in a circular fashion to indicate a calibration process or
‘M’ logo to indicate movement action on the mat. The product is deemed to be in working
condition.
Should the display show an error message, ‘E1’ or ‘E9’, kindly return the product to the service
center for support.
Baby weight limit on the mat for effective monitoring should fall within the range below:
2kg / 4.4lb – 12kg / 26.4lb
• The iBMM is NOT a medical device or a diagnostic device to prevent Sudden Infant
Death Syndrome (SIDS) or ‘cot death’. Babies with a known predisposition to any
breathing abnormality including apnea should be monitored by a doctor. Please seek
advice from doctors or health care professional for medical diagnosis or when unsure
of any symptoms.
• You should not rely on the iBMM for the wellbeing of your baby. It is NOT a substitute
for proper adult supervision. It is important that an adult stays within range of the
monitor at all times during use.
• It is advisable to use the mat for sleeping purpose and should not be used as a play
mat. DO NOT stamp or jump on the mat as the action may damage the mat and cause
malfunction.
• Avoid major movement activity around the mat as it is highly sensitive and may pick up
the movement signal as part of the movement signal of the baby. Patting action, high
vibration or motor-running activities will affect the accuracy of the baby movement
count.
• DO NOT subject the mat to sharp folds other than the mid-point fold and sharp objects
as it may damage the sensing element and affect the functionality and sensitivity of the
mat.
• DO NOT add thick and heavy items such as mattress between your baby and the mat
as sensitivity of the mat will be compromised. Adhere to the 2kg - 12kg/26lb weight
limitation of the mat. It is not meant for adult use.
• DO NOT wash or immerse the whole mat in water. Keep your mat away from sources
of moisture. It may cause the electronic control circuit to malfunction
iBMM
All Information and specification are subject to change without further notice
EXCELPOINT CONFIDENTIAL
• Any form of spillage or stain should be wiped off immediately with water on a damp
cloth to prevent permanent stain on the mat. Avoid using strong detergent. Gentle wipe
is sufficient to clean up stains. Excessive scrubbing action may damage the water-
resistance property of the mat.
• Observe polarity of the battery placement for proper functioning of the mat.
• DO NOT disassemble, crush, short-circuit or incinerate the battery as it may cause fire,
injury, burns or other hazards.
• DO NOT put the Parents Control Unit near wireless devices or a microwave oven. Such
devices can disrupt the transmission of the alarm signal.
• The operating temperature range for the iBMM is from 100C - 400C. DO NOT operate
beyond this range as it may not function according to defined specifications.
WARNING ON USAGE OF THE MAT
NO JUMPING/STAMPING NO SHARP HITS NO HEAVY WEIGHT NO IMMERSING IN WATER
Disposal Instructions
Do not dispose of the mat and Parent Control Unit with unsorted waste. Improper disposal may
be harmful to the environment and human health. Please refer to your local waste authority for
information on return and collection systems in your area.
iBMM
All Information and specification are subject to change without further notice
EXCELPOINT CONFIDENTIAL
TERMINOLOGY USED IN THE USER MANUAL
Terminology Definition
Body movement count Baby is sound asleep
Large movement Baby has woken up and is moving
No subtle body movement No subtle body movement of baby detected
Rapid body movement Baby is sound asleep, with
an increasing
upward trend of rapid body movement
Slow body movement Baby is sound asleep, with
slow body
movement
iBMM
All Information and specification are subject to change without further notice
EXCELPOINT CONFIDENTIAL
Table of Contents
1. GETTING STARTED 1
Parts description for the MAT 2
Parts description for the Parent Remote Control Unit 3
2. OPERATION OF THE IBM - SETTING UP 5
3. OPERATION OF THE IBM - STATUS INDICATION – WHEN BABY IS AWAKE 7
4. OPERATION OF THE IBM - STATUS INDICATION – WHEN BABY IS ASLEEP 9
5. OPERATION OF THE IBM - OTHER FORMS OF STATUS INDICATION 11
TROUBLESHOOTING AND FAQ 13
TECHNICAL SUPPORT 16
MAINTENANCE 17
LIMITED WARRANTY 17
All Information and specification are subject to change without further notice
EXCELPOINT CONFIDENTIAL
1
1. GETTING STARTED
Package contents
Your iBMM package includes:
• iBM
• Parent Control Unit
• User Manual
• Quick Start Guide
• Carrier bag
Before you can use the mat, you need the following
(not included in the product):
- 4 X AA dry cell battery for the mat
- 2 X AAA dry cell battery for the Parent Control Unit
For best performance, Lithium dry cell battery is recommended.
All Information and specification are subject to change without further notice
EXCELPOINT CONFIDENTIAL
2
Parts description for the MAT (iBMM-001-T)
1
2
4
3
5
All Information and specification are subject to change without further notice
EXCELPOINT CONFIDENTIAL
3
Parts description for the Parent Remote Control Unit (iBMM-001-R)
1 ON/OFF switch Turn the mat ON or OFF
2 LED indicator Mat operation status indication
3 Battery
compartment of
mat
To insert 4 x AA dry cell batteries for
the mat
4 Buzzer Local audio alarm outlet
5 Mat To support monitoring of baby
6 Mid-point of mat
Location to fold the mat into half
(Other locations of the mat should not
be folded)
10 7 13
11
9
8 12
14
All Information and specification are subject to change without further notice
EXCELPOINT CONFIDENTIAL
4
7 Turn ON or OFF
Reset alarm (Press and hold the button)
8 MODE button Toggle between functional modes
Reset alarm (Press and hold the button)
9 SELECT button
Toggle between selection in the
designated mode
Reset alarm (press and hold the button)
10 Battery
Compartment To insert 2 x AAA dry cell batteries
11 LCD display Display of baby movement status and
functional indicators
12 Alarm selector To select sound or both sound and vibrate
alarm
13 Clip To clip the Parent Control Unit to the
body of a caretaker
14 Stand To leave the Parent Control Unit on a
table top or flat surface
All Information and specification are subject to change without further notice
EXCELPOINT CONFIDENTIAL
5
2. OPERATION OF THE iBMM - SETTING UP
Insertion of battery on the mat
Flip the mat over to the bottom side. Open up the battery
compartment cover.
Insert the 4 AA batteries.
Insertion of battery on the Parent Control Unit
Open the battery compartment below the 3 buttons by sliding
the cover downwards as shown by the arrow label.
Insert the 2 AAA batteries.
Power on the iBMM
Place the mat on the cot, mattress or any flat surface. Put your
baby on the mat.
Press the ON/OFF switch towards the ‘ON’ position.
The LED indicator on the top of the sensor box will light up
alternating between green and red colour.
The LED indicator will show green colour after connection is
established with the Parent Control Unit.
All Information and specification are subject to change without further notice
EXCELPOINT CONFIDENTIAL
6
Power on Parent Control Unit
Press and hold the power button till the LCD display is
lighted up.
The Parent Control Unit will establish connection with the mat
automatically. Once connection is established, the current baby
status will be displayed.
The display will show ‘M’ to indicate baby movement detected
when the baby is moving.
When an auto-calibration process is in progress, the display will
indicate ‘--‘ scrolling in a circular fashion for a period of around
30 seconds as shown.
Mat sensitivity adjustment
To set mat sensitivity, press the MODE button until the mat
sensitivity symbol is blinking. Adjust sensitivity by pressing the
SELECT button.
Note: The mat will auto-calibrate the sensitivity level. At
instances when baby is moving extensively and the display still
show subtle body movement count, set higher sensitivity. Set
lower sensitivity when baby is sleeping soundly and the display
shows ‘M’ indicating large movement.
Baby movement monitor tone
The baby movement alert tone is activated by default when the
unit is power on. With the activation, the soft alert tone will sound
at 10 seconds interval when the baby is moving. The display will
show ‘M’ to indicate baby movement detected.
To set monitor alert tone, press the MODE button until the monitor
alert symbol is blinking.
Press the SELECT button to turn ON/OFF the monitor alert tone.
Modes
Icon
Sensitivity Level 3
(default)
Sensitivity Level 2
Sensitivity Level 1
MODE
SELECT
MONITOR TONE
ENABLE display: On
No display: Off
SENSITIVITY
Sensitivity Level: 1, 2, 3
All Information and specification are subject to change without further notice
EXCELPOINT CONFIDENTIAL
7
3. OPERATION OF THE iBMM - STATUS INDICATION – WHEN BABY IS AWAKE
Large movement
The display with show ‘M’ when large movement (eg. awake,
crying) is detected.
When a constant baby movement period of 20
seconds is
detected, the alarm will be activated and audio alarm will
double beep at 5 seconds interval.
Press and hold the MODE, SELECT or POWER button once to
de-activate it (normal button functions are disabled at this time).
Release the button when the alarm is off. Once de-activated,
alarm will NOT be triggered by any large movement in the next
5 minutes window.
No subtle body movement
The display with show ‘00’ when no subtle body movement is
detected for consecutive 15 seconds.
The alarm will be activated and audio alarm will sound
continuously.
Press and hold the MODE, SELECT or POWER button once to
de-activate it (normal button functions are disabled at this
time). Release the button when the alarm is off.
Note: Audio alarm will also be activated on the mat
independent on whether the Parent Control Unit is powered
on.
All Information and specification are subject to change without further notice
EXCELPOINT CONFIDENTIAL
8
Baby absence
The display with show ‘--’ when baby is taken out or not on the
mat.
The alarm will be activated and audio alarm will double beep at
0.5 seconds interval.
Press and hold the MODE, SELECT or POWER button once to
de-activate it (normal button functions are disabled at this
time). Release the button when the alarm is off.
Note: Audio alarm will also be activated on the mat
independent on whether the Parent Control Unit is powered
on.
All Information and specification are subject to change without further notice
EXCELPOINT CONFIDENTIAL
9
4. OPERATION OF THE iBMM - STATUS INDICATION – WHEN BABY IS ASLEEP
Body movement count
The body movement count per minute of the baby is monitored
and displayed on the LCD.
No subtle body movement
The display with show ‘00’ when no subtle body movement is
detected for consecutive 15 seconds.
The alarm will be activated and audio alarm will sound
continuously.
Press and hold the MODE, SELECT or POWER button once to
de-activate it (normal button functions are disabled at this time).
Release the button when the alarm is off.
Note: Audio alarm will also be activated on the mat independent
on whether the Parent Control Unit is powered on.
All Information and specification are subject to change without further notice
EXCELPOINT CONFIDENTIAL
10
Large movement
The display with show ‘M’ when large movement (eg. awake,
crying) is detected.
When a constant baby movement period of 20 seconds is
detected, the alarm will be activated and audio alarm will double
beep at 5 seconds interval.
Press and hold the MODE, SELECT or POWER button once to
de-activate it (normal button functions are disabled at this
time).Release the button when the alarm is off. Once de-
activated, alarm will NOT be triggered by any large movement in
the next 5 minutes window.
Baby absence
The display with show ‘--’ when baby is taken out or not on the
mat.
The alarm will be activated and audio alarm will double beep at
0.5 seconds interval.
Press and hold the MODE, SELECT or POWER button once to
de-activate it (normal button functions are disabled at this
time).Release the button when the alarm is off.
Note: Audio alarm will also be activated on the mat
independent on whether the Parent Control Unit is powered
on.
All Information and specification are subject to change without further notice
EXCELPOINT CONFIDENTIAL
11
Upward trend of rapid body movement alert
In the event of upward trend of rapid body movement
detected, the display will blink, switching between current
body movement count reading and ‘H’ symbol (to indicate
high body movement).
The alarm will be activated and audio alarm will double beep
at 5 seconds interval.
Press and hold the MODE, SELECT or POWER button once
to de-activate it (normal button functions are disabled at this
time).Release the button when the alarm is off.
Slow body movement alert
In the event of slow body movement detected, the display will
blink, switching between current body movement count
reading and ‘L’ symbol (to indicate low body movement).
The alarm will be activated and audio alarm will double beep
at 5 seconds interval.
Press and hold the MODE, SELECT or POWER button once
to de-activate it (normal button functions are disabled at this
time).Release the button when the alarm is off.
5. OPERATION OF THE iBMM - OTHER FORMS OF STATUS INDICATION
All Information and specification are subject to change without further notice
EXCELPOINT CONFIDENTIAL
12
Out of range
The open space distance limit between the Parent Control
Unit and mat is up to 100m. Indoor limits will be reduced
significantly, subject to the layout of the building concrete
structure.
The antenna symbol will blink simultaneously when
communication cannot be maintained between the Parent
Control Unit and mat. Walk closer towards the mat with the
Parent Control Unit to re-establish the link.
Note: Audio alarm will be also activated on the Parent Control
Unit when the mat is NOT powered on.
Manual pairing of iBMM and Parent Control Unit
Each iBMM is automatically pre-paired with each of its
Parent Control Unit.
Where there is a need to manually pair the units, power off
and on the mat again. Power off and on the Parent
Control Unit as well. Upon powering on, press and hold
both POWER and MODE buttons simultaneously. Release
buttons when display shows a ‘P’ symbol alternating
between the left- and right-hand sides.
Pairing process will complete automatically and the iBMM
will start operation.
All Information and specification are subject to change without further notice
EXCELPOINT CONFIDENTIAL
13
Low battery indication for mat
The low battery indication for the mat will blink
simultaneously when battery for the Parent Control Unit
is low.
Replace battery for the mat.
Low battery indication for Parent Control Unit
The low battery indication for Parent Control Unit will blink
simultaneously when battery for the Parent Control Unit is
low.
Replace battery for the Parent Control Unit.
Weight limit indication for mat
The weight limit indication for the mat will be shown as
‘HP’ to indicate high pressure, such as heavy weight on
the mat or the baby sitting up.
Note: If the indication remains when the baby is in
sleeping position, the baby weight had exceeded the
defined weight limit of the mat.
All Information and specification are subject to change without further notice
EXCELPOINT CONFIDENTIAL
14
TROUBLESHOOTING AND FAQ
Problem
Possible cause
Remedy
False alarm
• The baby may have
excessive movement when
the caretaker/sibling is
playing next to the baby or
attending to the baby’s
need (changing diapers,
feeding, patting)
• External event such as
patting action, high
vibration or motor-running
activities near the mat
• Switch off the
Parent
Control Unit when the
parent/caretaker/sibling
is attending to the baby.
Switch it on again to
continue monitoring
when baby is asleep.
No alarm tone
• Battery may be low • Check battery level and
replace battery if
needed.
No movement
monitor tone
• The baby movement
monitor tone may be off.
• Battery may be low
• Turn on the monitor
tone with the MODE
button
• Check battery level and
replace battery if
needed.
No movement
detected
• The sensitivity level may
be low.
• Adjust up the sensitivity
level with the SELECT
button
‘M’
(Movement)
display on the
Parent Control
Unit when baby
is sound asleep
• Baby may have strong
movement patterns
• Adjust down the
sensitivity level with the
SELECT button
All Information and specification are subject to change without further notice
EXCELPOINT CONFIDENTIAL
15
Out of range
indication
• The mat and Parent Control
Unit are too far apart.
• The mat or Parent Control
Unit may be placed near
large metal objects.
• The link between the mat
or Parent Control Unit may
be lost
• Battery is not inserted on
the mat.
• Try to adjust the relative
distance nearer between
the mat and Parent
Control Unit.
• Ensure battery is
inserted on the mat side.
• Power off and on again
for both the mat and
Parent Control Unit to try
establishing the link.
• Enable manual pairing
by powering on 1 mat
and 1 Parent Control Unit.
(refer to Section 5:
Operation of the iBMM:
Other forms of
indication)
• Ensure battery is
inserted on the mat side.
Wireless link
loss
• Range too far between mat
and Parent Control Unit
• Maintain closer range
between mat and Parent
Control Unit
•
Low battery
•
Replace batteries.
Error codes
(indicated on
Parent Control
Unit)
Possible cause
Remedy
E1
• The fiber sensor is broken
• Mat is no longer
functioning. Please
contact your service
center.
E2
• Extreme low battery level
of the mat
• Replace batteries for the
mat.
E9
• Device Malfunction • Please contact your
service center
All Information and specification are subject to change without further notice
EXCELPOINT CONFIDENTIAL
16
TECHNICAL SUPPORT
Before you contact the Technical support, please read the Troubleshooting and FAQ section.
If you have questions about the use or features of the product please contact our Call Center at the following e-mail
address: ___________________________.
When you call or contact us for support, please include as much information possible from the packaging material.
This will help us in speeding the process.
All Information and specification are subject to change without further notice
EXCELPOINT CONFIDENTIAL
17
MAINTENANCE
• DO NOT subject the mat to sharp folds other than the mid-point fold as it may
damage the sensing element and affect the functionality and sensitivity of the mat.
• DO NOT wash or immerse the whole mat in water. Clean the mat with a soft damp
cloth and allow to dry. Avoid using any chemical or cleaning detergent.
• Keep your mat away from sources of moisture. It may cause the electronic control
circuit to malfunction.
• DO NOT drop the Parent Control Unit on the floor as it may damage internal
components and cause malfunction.
• Keep the Parent Control Unit away from moisture.
• Remove batteries from the Parent Control Unit and mat when not in use for a long
period of time.
• The operating temperature range for the iBMM is from 100C - 400C. DO NOT operate
beyond this range as it may not function according to defined specifications.
LIMITED WARRANTY
Your iBMM is covered warranty for malfunction in the electronic parts only, for a period of 12 months from the date
of the original purchase, when used in accordance with the usage condition provided with the unit. Malfunction due to
misuse, not in accordance with the usage condition , will not be covered in the warranty.
We will, at our discretion, repair or replace the product free of charge, should it fails to function properly when used
as directed within the warranty period.
This warranty does not cover the battery, damaged as a result of accidents, improper maintenance or any other form
of misuse. The warranty is also void if the owner attempts to fold the mat when instructed not to as stated in the user
manual, repairs or modifies the product in any way. We are not liable for any incidental or consequential damages
with regard to this product. The warranty also excludes any liability other than what is stated above.
This device complies with the essential requirements of the R&TTE Directive 1999/5/EC. The following test methods
have been applied in order to prove presumption of conformity with the essential requirements of the R&TTE
Directive 1999/5/EC:
- EN 60950-1: 2006/A1: 2010
- EN50371 : (2002-03)
- EN 300 220-2 V2.3.2 (2010-02)
- EN 301 489-1 V1.8.1: (2008-04)
- EN 301 489-3 V1.4.1 (2002-08)
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
All Information and specification are subject to change without further notice
EXCELPOINT CONFIDENTIAL
18
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate this equipment.
IMPORTANT NOTE:
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. To
maintain compliance with FCC RF exposure compliance requirements, please follow operation instruction as
documented in this manual.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
For any technical assistance contact the technical support center online at ________________________ or contact
our Call Center at the following e-mail address: ___________________________.

Navigation menu