Excera Technology EP8100U1 Digital Portable Radio User Manual EP8100
Shenzhen Excera Technology Co., Ltd. Digital Portable Radio EP8100
Contents
- 1. Users Manual
- 2. User manual
Users Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2715628 |
| Application ID | zhnDxJMcdZWZaUPeOaGTRQ== |
| Document Description | Users Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 246.61kB (3082621 bits) |
| Date Submitted | 2015-08-14 00:00:00 |
| Date Available | 2015-08-14 00:00:00 |
| Creation Date | 2015-07-24 09:53:01 |
| Producing Software | Corel PDF Engine Version 16.1.0.843 |
| Document Lastmod | 2015-07-31 10:50:36 |
| Document Title | EP8100说明书 - 认è¯.cdr |
| Document Creator | CorelDRAW X6 |
| Document Author: | æŽé‡‘爱 |
USER’S MANUAL Digital Portable Radio EP8100 U1 Contents Important Information High Noise Reduction 14 RF Energy Exposure Information Time-out-Timer(TOT) Operation Safety Recommendations GPS Positioning 14 14 Radio Saftety Information and RF Radiation Information Disabled Frequency DMR Trunking Functions and Operations 15 Private Call 15 Packing List Group Call 17 Before Use All Call 18 Emergency Call 19 Ready to Use Product Controls 11 LED Iindicator 12 Status Icons 12 Product Functions and Operations Operation Mode 13 13 Produt Information Display 13 Time and Date Setting 13 Alert Tone 13 Vibration 13 Backlight 13 Menue Reset 14 Locking/Unlocking the Keypad Programmable Keys 14 14 Broadcast Call 19 Priority Call 19 Dispatch Station Call 19 DMR Public Network Call 19 DMR-MPT Call 19 Contacts 20 Message 21 Status Message 21 Call Logs 22 Redail List and Callback List 22 Vehicle Inquiry 23 ID Inquiry 23 Status Filing 23 Contents MPT Trunking Functions and Operations 24 Optional Accessories Private Call 24 Troubleshooting 35 Group Call 25 Warranty and Maintains 36 All Call 27 Emergency Call 27 Broadcast Call 27 Scope of Warranty Warranty Contents Non of Warranty 36 36 36 Priority Call 27 Dispatch Station Call 27 MPT Pubic Network Call 28 MPT-DMR Call Call Logs 28 28 Redail and Callback List 29 Digital Conventional Functions and Operations 30 Emergency Call 30 Information 31 Call Logs 32 Zone 32 Analog Conventional Functions and Operations 30 Private Call,Group Call and All Call 33 DMO and RMO Mode 33 Squelch Level 33 34 Disclaimer 37 Warranty Card 38 Important Information Note: Ic Note : Cet Appareil Est Conforme À La Partie 15 Des Règlements De La Fcc Et Aux Normes Rss De L’industrie Du Canada. Son Fonctionnement Est Soumis Aux Deux Conditions Suivantes : (1) Cet Appareil Ne Doit Pas Causer Des Interférences Nuisibles, Et (2) Cet Appareil Doit Accepter Toute Interférence Reçue, Y Compris Les Interférences Qui Peuvent Provoquer Un Fonctionnement Indésirable.. Le Fabricant N'est Pas Responsable Des Toutes Interférences Radio Ou Télévision Causées Par Des Modifications Non Autorisées Apportées À Cet Appareil. De Telles Modifications Peuvent Empêcher L’utilisateur D’utiliser L'appareil. Ic Note: This Device Complies With Part 15 Of The Fcc Rules And Industry Canada License-exempt Rss Standard(s). Operation Is Subject To The Following Two Conditions: (1) This Device May Not Cause Harmful Interference, And (2) This Device Must Accept Any Interference Received, Including Interference That May Cause Undesired Operation. The Manufacturer Is Not Responsible For Any Radio Or Tv Interference Caused By Unauthorized Modifications Or Change To This Equipment. Such Modifications Or Change Could Void The User’s Authority To Operate The Equipment. The Users Manual Or Instruction Manual For An Intentional Or Unintentional Radiator Shall Caution The User That Changes Or Modifications Not Expressly Approved By The Party Responsible For Compliance Could Void The User's Authority To Operate The Equipment. In Cases Where The Manual Is Provided Only In A Form Other Than Paper, Such As On A Computer Disk Or Over The Internet, The Information Required By This Section May Be Included In The Manual In That Alternative Form, Provided The User Can Reasonably Be Expected To Have The Capability To Access Information In That Form. Important Information RF Energy Exposure Information RF Energy Exposure Awareness And Control Information For Fcc Occupational Use Requirements Ibefore using the two-way portable radio, review the following important RF energy awareness and control information and operational instructions. Comply with this information and instructions in order to ensure compliance with RF exposure guidelines.e the capability to access information in that form. WARNING This radio is intended for use in occupational/controlled conditions, where users have full knowledge of their exposure and can exercise control over their exposure to remain below RF exposure limits. This radio is NOT authorized for general population, consumer, or any other use. Changes or modifications not expressly approved by Shenzhen Excera Technology Co., Ltd.could void the user's authority to operate the equipment. CAUTION This two-way radio uses electromagnetic energy in the radio frequency (RF) spectrum to provide communications between two or more users over a distance. It uses RF energy or radio waves to send and receive calls. RF energy is one form of electromagnetic energy. Other forms include, but are not limited to, electric power, sunlight, and x-rays. RF energy, however, should not be confused with these other forms of electromagnetic energy, which, when used improperly, can cause biological damage. Very high levels of x-rays, for example, can damage tissues and genetic material. Experts in science, engineering, medicine, health, and industry work with organizations to develop standards for exposure to RF energy. These standards provide recommended levels of RF exposure for both workers and the general public. These recommended RF exposure levels include substantial margins of protection. All two-way radios marketed in North America are designed, manufactured, and tested to ensure they meet government-established RF exposure levels. In addition, manufacturers also recommend specific operating instructions to users of two-way radios. These instructions are important because they inform users about RF energy exposure and provide simple procedures on how to control it. Refer to the following websites for more information on what RF energy exposure is and how to control exposure to assure compliance with established RF exposure limits: http://www.fcc.gov/oet/rfsafety/rf-faqs.html http://www.osha.gov./SLTC/radiofrequencyradiation/index.html Important Information Federal Communications Commission Regulations Before it was marketed in the United States, the Digital portable radio was tested to ensure compliance with FCC RF energy exposure limits for two-way portable radios. When two-way radios are used as a consequence of employment, the FCC requires users to be fully aware of and able to control their exposure to meet occupational requirements. Exposure awareness can be facilitated by the use of a label directing users to specific user awareness information. The radio has an RF exposure product label. Also, the Product Safety Manual and this Operator’s Manual include information and operating instructions required to control RF exposure and to satisfy compliance requirements. Operation Safety Recommendations Occupational Safety Guidelines And Safety Training Information To ensure bodily exposure to RF electromagnetic energy is within the FCC allowable limits for occupational use. Always adhere to the following basic guidelines: • The push-to-talk button should only be depressed when intending to send a voice message. • The radio should only be used for necessary work-related communications. • The radio should only be used by authorized and trained personnel. It should never be operated by children. • Do not attempt any unauthorized modification to the radio. Changes or modifications to the radio may cause harmful interference and/or cause it to exceed FCC RF exposure limits. Only qualified personnel should service the radio. • Always use only authorized accessories (antennas, control heads, speakers/mics, etc.). Use of unauthorized accessories can cause the FCC RF exposure compliance requirements to be exceeded. The information listed above provides the user with information needed to make him or her aware of a RF exposure, and what to do to assure that this radio operates within the FCC exposure limits of this radio. Important Information Radio Frequency Interference FCC Part 15 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference; and, 2. This device must accept any interference received, including interference that may cause undesired operation. Industry Canada This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS. Adapter shall be installed near the equipment and shall be easily accessible. The max operating of the device is 55℃. RadioFrequencyEnergy—Topreventburnsorrelatedphysicalinjuryfromradiofrequency energy, do not operate the transmitter when anyone outside of the vehicle is within the minimum safe distance 5mm. EU Regulatory Conformance As certified by the qualified laboratory, the product is in compliance with the essential requirements and other relevant provisions of the Directive 199/5/EC.Please note that the above information is applicable to EU countries only. Important Information Please read this manual carefully before use. Alert Icons Packing List Please unpack carefully and check that all items listed below are received. If any item is missing or damaged ,please contact your dealer. Caution:Indicates situations that could cause data loss or damage to your products. Note: Indicates tips that can help you make better use of your products. Charger Battery Radio Unit 用户 说明 书 Caution! Power Adapter Antenna Belt clip Manual Restricted to occupational use to satisfy FCC RF exposure limits. Before Use Before Use radio Charge the Battery This radio is built in Li-ion battery .In order to prevent from damaging and comply with the warranty, use only the charger and battery specified by Excera.The following figure shows the steps for charging. Charging Indicator LED Indicator Charging Status Red LED flashes slowly Standby (no load) Red LED glows Charging Orange LED glows 90% charged Green LED glows Fully charged Red LED flashes rapidly Failure Charging Diagram Procedures 1.Plug the other end of the power adapter into the rear jack of the charger.See arrow①. 2.Connect the power adapter to AC socket,See arrow②. 3.Place the radio with the battery attached,or the battery alone, into the charger.See arrow③. 4.The charging process initiates when LED glows red,and is completed when LED glows green. Before Use Attaching the Batttery 1.Insert the battery into top of the radio .see arrow①. 2.Slightly press the bottom of the battery until a click is heard. See arrow②. Note: To remove the battery ,turn off the radio first.Then slide the battery latch upwards to unlock the battery. Attaching Antenna Plug the antenna to antenna pedestal,turn the antenna clockwise to fasten it . Note: Turn off the radio before removing .To remove the antenna,rotate it counter-clockwise. Before Use Attaching the Belt Clip 1.Remove the screws from the back of radio. 2.Align the screw holes on the belt clip with those on the radio's body ,and then tighten the screws. Attaching the audio accessory/Programming Cable 1.Open the accessory jack cover as the arrow shown. 2.Align the plug with accessory jack. 3.Tighten the screw on the plug. Note: To remove the accessory ,loosen the screws. Note: To remove the belt clip,loosen the screws. 10 Caution: When you are using an external accessory , Waterproof performance of the radio may get affected. Before Use Product Controls Part Name No. No. Part Name No. Part Name SK1 (Side 1 Key) LCD Display Accessory Jack PTT Key Menu Key Setting Key Sk2 (Side 2 Key) Channel/Group Selector Knob Radio On-off/ Volume Control Knob Answer/ Calling Key P1 Speaker Hang Up /Home Key P2 Up and down Key Numeric Key Belt Clip LED Indicator Antenna Battery Speaker TK key 11 Before Use LED Indicator LED Indicator 12 Status Icons Radio Status Icon Icon Name LED flashes green slowly. Standby(no load) Signal Strength Icon LED flashes green rapidly. Upgrading or powering on LED glows green. Receiving New Message Icon , Inbox Icon is full LED flashes Red slowly. Low power warnning LED flashes red rapidly. Receiving LED glows red. Transmitting Low Power Icon LED flashes orange slowly. Scanning Battery Strength Icon LED flashes orange rapidly. Receiving Accessory Icon Roam Icon LED glows orange. After voice communication ends,you can hold down the PTT key to talk while the LED is glowing orange. Scan Icon High Power Icon GPS Icon Missed Call Icon Product Function and Operations Operation Mode This radio supports three operation Mode :DMR Trunking mode,MPT Trunking mode and Conventional mode(Digital and Analog).Switching Methods: Time and Date Display Setting Use this function to modify this radio Date and Time. Press “Setting”Key to access “Radio Setting”-“Date and Time”interface to modify the Date and Time. Alert Tone Press the Setting Key to access “Function Setting”- “Mode Setting” and select a appropriate mode. Note:To access Digital Conventional Mode and Analog Conventional Mode to select Conventional Mode. Product Information Display You may achieve the following product information in this interface : Product Name,Product ID,Series Number,Frequency Range,Product Versions,Data Base Versions,Vocoder Versions, Lastest Programming Date and ESN Code and so on. Press Setting Key to access Product Information interface and review all the information. This function enable you set the following tones for your radio:“Keypad Tone”, “Calling Tone”,“Called Tone”, “Function Tone”,“Warning Tone”,“Low Battery Tone”and Test Message Tone” Press “Setting”Key to access “Radio Setting”-“Tone”. Notes:The function tone is the alert tone of the programmable Key function On/Off and Switching ,such as High or Low power Switching and Zone Switching. Vibration To set whether to enable the vibration function base on user habit .To set this funcation via the CPS and Radio Menu setting. Backlight To set the backlight parameters of On/Off time,Off Type and Brightness Value. Press”Setting”key to access “Radio Setting”-“Display Setting” . 13 Product Functions and Operations Menu Reset Time- out Timer(TOT) This radio supports Menu Reset function ,that is ,if you don’t operate the menu for a predefined time period.This radio will automatically reback to the home screen. Hold down the Setting Key ,go to the “Product Setting” -”Menu Reset” Locking/unlocking the Keypad Through Key Combination ,Press Menu Key+ and unlocking the keypad. Key to lock Programming Key You are available to set the keys SK1、SK2 and TK key as the shortcuts,such as High Power and Low Power switching and Zone Up and Zone Down,Squelch and Scan .This function only via the CPS setting. The purpose of TOT is to prevent any user from occupying a channel for an extended period.You can set the longest time of single pressing PTT. If the preset time expires ,the radio will terminate transmission automatically . This feature can be enabled via the programming software. GPS Positioning This function helps to get and upload the radio GPS location data(As shown). High Noise Reduction This function will effective reduce the noise under the high noise conduction. The noise reduction reach 25dB and makes voice will be clear. This function are available for your setting through the Programmable Key and radio Menu. Note: This feature default off .If this feature is enabled your speaking volume will be low. After this feature is enabled, you need speak near the MIC. 14 Press "Setting "Key ,to go to "Radio Information”"Positioning System”- “Positioning System On/Off”to turn On/Off GPS function. After GPS turn on,the radio status Positioning iron will display.If the GPS locate successfully ,the Iron change to from . Review the GPS positioning data from the “Radio information”- “Positioning System”- “Radio Positioning Information”. Product Functions and Operations Note: To ensure an optimal volume of the receiving radio,hold the radio approximately 2.5 to5cm from your mouth. Private Call Under DMR trunking mode, to set Private Call type via trunking system. FOACSU and OACSU ●FOACSU: While seting up a call,ring warn the calling party, and the called party receive the call through manual operation. ●OACSU : While seting up a call without any ring warn for the calling party ,and the called party receive the call through manual operation. Transmitting a Private Call You may transmit a Private Call through any of the following methods. Transmitting a call through Contacts List or Call Logs 1.Press Menu Key to go to Main Contacts. 2.Go to“Contacts List - Private Call Contacts”,Or go to "Call Logs" and access the outgoing /Incoming/Missed list. 3.Use the Up/Down Key to select the Private Call contacts you want to call. 4.Use P1 Key or PTT Key to Transmit a call. Through manual input 1.Input a Private Call number you want to call in home screen . 2.Use P1 Key ,PTT Key or select Dail Key # to transmit a Private Call. Transmitting a call through Redail List or Recall List. 1.Use P1 Key to Redail List or P2 Key to Recall List to Input a Private Call number you want to call in home screen . 2.Use P1 Key, PTT Key or select Dail Key #to transmit a Private Call. Note: Transmitting a Private Call Failed while products unregistered or Registration Failed . 15 Product Functions and Operations Receiving and Responding to a Private Call When a Private Call is received ,your radio automatic to receive a private call and sounds “De,De”,your radio will display the icon (As shown above) . You may press P1 key or PTT key,coming call ring and icon will disappear. ,the first line display the coming call alias or ID. (As shown above) Note:No need press the Receiving Key while setting automatic receiving and responding to a Private Call . Voice Communication After setting up a private Call ,both the calling party and called party are in PTT allowed interface ,and hold down PTT to talk. 16 Call Duration After setting up a Private Call ,both the calling party and called party LCD will display call duration in time .Unit is “Minutes :Seconds”. (As shown) ● The calling party LCD . To count up the Call Duration by count -down,the starting time of count-down time is the total lasted talking time. This time is preset time via system configuration . When the total lasted calling time expires the preset time, this radio will return back from calling and end this call. ● The called party LCD To count up the Call duration time by occurred time ,the start time from 0. Ending a Call 1.Nobody hold down PTT Key for a long time ,and this radio will end call automatically when silence period expires. 2.This radio will end call when the total calling time expires the preset time. 3.During calling, any party of calling or called hang up. 4.Base station signal lost. DMR Functions and Operations Group Call Receiving and Responding to a Group Call You may transmitting a Group Call through any of the following methods. Transmitting a call to the preset contacts. In the home screen,hold down PTT Key to transmitting a Group Call to the Group Call contacts preset for the current Channel. (By the Group Knob to select a group you want to call). Transmitting a Group Call to the Contacts List or Call Logs. 1.Press Menu Key to Main Menu 2.Go to “ Contracts List--Group Call Contacts ” or “ Call Logs ” to access to outgoing/Incoming /Missed Call. 3.Use the Up/Down Key to select the Group Call Contacts you want to call. 4.Use P1 Key or PTT Key to transmitting a Group Call. When a Group Call is received,your radio will display the icon and have "De"alert tone. Press P1 or PTT Key,the incoming call iron will disappear . Transmitting a Group Call through manual input 1.Input a Group Call number you want to call 2.Use PTT Key, P1 Key or Dail Keypad # to transmitting a Group Call. Late Access After Group Call set up to the end,those following type radio haven’t ended will join in this Group Call such as : Raio just powering on , Radio just roams from other basestation or radio just releases from other group . Transmitting a call through recall List or Call Logs 1.Use P1 key ,to go to Call Logs List or press P2 Key to select Group Call number you want to call. 2.Use P1 key or PTT Key to transmitting a Group Call. Voice Call After seting up a call ,hold down PTT key to initiate a call when the calling party and the called party are in the PTT allowed interface. 17 DMR Functions and Operations Call Duration After setting up a Group Call ,Both the calling party LCD and the called party LCD will display Call Duration in time . Unit is “Minutes :Seconds.”(As shown) All Call Two types of All Call are Team All Call and Whole Network All Call. Team All Call ● The calling party LCD . To count up the Call Duration by count -down,the starting time of count-down time is the total lasted talking time. This time is preset time via system configuration . When the total lasted calling time expires the preset time ,this radio will return back from calling and end this call. ● The called party LCD To count up the Call duration time by occurred time ,the start time from 0. To count up from the called party access to Group Call . Recount up by count-down requires when the called party end a Group Call and access this group by “Late Access”. Ending a Call 1.Nobody hold down PTT Key for a long time ,and this radio will end call automatically when the time expires silence period . 2.This radio will end call when the total calling time expires the preset time. 3.During calling, the calling party hang up. 4.Base station signal lost. 18 999 is the last one Group Call number in this team , When you initiate a Team All Call,all member in this team will receive and respond to this call . Three methods are aviable for transmitting a Team All Call :Transmitting a call to preset contacts ,transmitting a call through group call contacts or manual input number . The specific operation is the same as the Group Call. Whole Network All Call When you initiate a Whole Network Call ,and all the member will join in this call ,1981,1982 are Whole Network Call number. The three methods are available for transmitting a Whole Network Call:transmitting a call to the preset contacts , transmitting a call through Group Call Contacts or through manual input (Add * key befor 1981 or 1982 ). DMR Functions and Operations Emergency Call Emergency Call can be Emergency Private Call or Emergency Group Call . The following two methods are available to initiate a Emergency Call. 1.Press Emergency Call Key to initiate a Emergency Call. The called number can be set via programming software in trunking mode . 2.Through manual input number to initiate a Emergency Call. (Add *9* before number ).Use P1 key, PPT Key or # key to initiate a call. Broadcast Call Broadcast Call only can be Broadcast Group Call .Only the calling party has the rights to speech. You may initiate a Broadcast Call through manual input .(Add *11* before number ). Use P1 key ,PTT Key or # key to initiate a call. Priority Call Via programming software configuration to set Priority Call level: Low ,Middle ,High or Preemption Call .You may initiate Priority Call through manual dail (Add *8* before number).Use P1 Key , PTT Key or # key to initiate a call. Dispatch Station Call This radio can call the Dispatch Station. The number of Dispatch Station are based on configuration. DMR Republic Network Phone Call The calling with Public Network Phone is called Public Network Call.Network Phone Call have fixed phone call and mobile phone. For your better use ,for example as follow. House Fixed Telephone fixexed fixr Dail fixed telephone number directly Such as dial 8036 directly External Fixed Telephone Add 0 before telephone number Such as00755-33010296 Making Local Mobile Telephone Call Add 0 before telephone number Such as013112345678 Making Nonlocal Mobile Telephone Call Add 00 before telephone number Such as 0013112345678 DMR-MPT Call Base on the associated DMR-MPT group call number configured by basestation , you can achieve DMR trunking mode radio call DMR trunking mode radio each other. DMR trunking radio transmit a DMR-MPT call In DMR trunking mode ,you may transmit a DMR-MPT Call through any of the following methods. 1,Transmitting a call to the preset contacts. 2,Transmitting a call through Group Contacts . 3,Through manual input. (Specific operation is the same as group call) 19 DMR Functions and Operations Contacts List To access to this menu,Press Menu Key to Main Menu and select “Contacts List ”. 1、Private Call Contacts You can save up to 256 entries in the private Call Contacts list . To access this item, select"Contacts-Private Call Contacts" or through Private Call List shortcut key for the contacts list via CPS configuration. a) To review ,modify or delete any one of contacts on list. b) If you want to delete all contacts ,select"Contacts List-Private Call Contacts-Contacts-Delete All" 2、Group Call Contacts You can save up to 256 entries in group Call Contacts list . To access list through“Contacts List -Group Call Contacts”. a)To review the details of any contacts on the list ,just like alias and ID information. 20 3、Public Network Contacts You can save up to 256 entries in the Public Network Contacts. To access this item through "Contacts List-Public Network Contacts" a) To review ,modify or delete any one of contacts on list. b) If you want to delete all Contacts ,select"Contacts List-Private Call Contacts-Contacts-Delete All" 4、New Contacts You can add a Private Call Contacts and Public Network Contacts to Contacts List . The New Private Call Contacts will save to Private Call Contacts List automatically . The New Public Network Contacts will save to Public Network Contact List automatically . a)The New Private Contact number must be unique. b)The alias of each Private Call Contacts save up to 16 characters,the available number is 8 figure [NumberID must conform to the rules of dial-up]. c)The alias of each Public Network Contacts save up to 16 characters, the available numbeic is 18 figures [NumberID must conform to the rules of dial-up]. Note:You can switch input method through # key when input contacts alias. DMR Functions and Operations Message To access this item,press Menu key to go to main menu to select“message”. 1、Inbox The Inbox can save up to 100 received messages. When the Inbox save up to 90 received messages ,and go on receiving messages ,radio will appear notes “Inbox will be full, please delete message”and the earliest message will be overwritten by the latest one automatically. 2、Outbox The Outbox can save up 100 sent messages. Each message will appear appropriate Iron to note message send successfully or not . a) When the message sent successfully,the icon"√"will appear. b) When the message sent unsuccessful,the icon"!" will appear and please send again. When the OutBox is full,the earliest message will be overwriten by the latest one automatically. 3、Drafts The Drafts can save up to 10 drafts messages into Drafts. When the Drafts is full, the earliest message will be overwritten by the latest one automatically. 4、New Message You can create new text message(179 characters at most) and send it to an individual user or to a talk group. 5、Preset message Under this option there are some text messages (10 entries at most )preset by your dealer.You can choose and send any entry. 6、Status Msg There are some text message(95 entries at most ) preset by your dealer in this menu. You can select and send directly . The status Msg is status code. 21 DMR Functions and Operations Call Logs Press Menu Key to access Main Menu and then select“Call Logs”. This radio can save up to 200 call entries.When the entries list is full.The earliest entry will be over written by latest one automatically.To view, delete, or delete all after selecting one call entries . Redial List and Callback List Use P1 Key and P2 Key to access "Redail List "and" Callback List”. This radio can save up to 10 call entries .When the entries list is full,the earliest entry will be over written by latest one. 22 Redail List All outgoing call list will be save in the Redial List . To access this item,Use P1 key in home screen (As shown) . Use P1 Key or PTT Key to select the outgoing entries to initiate a call,delete it or delete all . Callback List The Callback List will save up all the incoming entries To access this item ,Use P2 key in the home screen (As shown). Use P2 key or PTT key to initiate a call ,delete it or delete all. DMR Functions and Operations Vehicle Inquiry Status Filing To access this item ,press Menu Key to access Main Menu to select “Public security --Vehicle information ". Press Menu Key to access Main Menu to select “Applications—Status Filing”. You can input the vehicle license number and sent it to dataspace when you want to inquiry it .You also can review it from the history record. When the feature is enabled,the control center or other radio holder will master your working status etc. [Such as:on the job ,off the job or just leave the job]. ID Inquiry You may process this function quickly through Shortcut Key Setting Menu. Filing Address Setting: You may send your status to your assigned receiver through Filing Address Setting . You can input ID number to the ID editing interface and send it to dataspace when you want to inquiry it .You also can review it from the history record. 23 MPT Trunking Functions and Operations To ensure an optimal volume of the receiving radio,hold the radio approximately 2.5to 5 centimeters away from your month . Receiving and Responding to a Private Call Private Call Transmitting a Private Call You may transmit a Private Call through the following methods. When transmitting a Private Call ,this radio will set up calling automatically . Transmitting a call through Contacts and Call Logs 1.Press Menu Key to go to Main Menu 2.Go to“Contacts List - Private Call Contacts List”,Or go to "Call Logs" and access the outgoing /Incoming/Missed list. 3.Use the Up/Down Key to select the Private Call Contacts you want to call. 4.Use P1 Key or PTT Key to transmit a call Through Manual Input 1.Input a Private Call number you want to call in home screen. 2. Use P1 Key ,PTT Key or select dail Key # to transmit a Private Call. Transmitting a Private Call through Redail List or Recall List. 1.Press P1 Key to Redail List or P2 Key to Recall List to Input a Private Call number you want to call in home screen. 2.Use P1 Key or PTT Key to transmit a Private Call. Note: Transmitting a Private Call failed while products unregistered or registration failed . 24 When a Private Call is received ,your radio automatic to transmit a Private Call and sounds “De,De”,your radio will display the icon. (As shown above). You may press P1 key or PTT key,coming call Ring and icon will disappear. The first line display the coming call alias or ID (As shown above). Voice Communication After setting up a Private Call ,both the calling party and called party are in PTT allowed interface ,and hold down PTT Key to talk. MPT Trunking Function and Opertaions Call Duration After setting up a private call ,Both the calling party LCD and called party LCD will display Call Duration in time . Unit is “Minutes :Seconds”(As shown). When a Private Call is received ,your radio automatic to receive a private call and sounds “De,De”,your radio will display the icon (As shown above) . You may hold down P1 key or PTT key,coming call ring and icon are disappeared.The first line display the coming call alias or ID.(As shown above) Note:No need hold down the Receiving Key while setting automatic receiving and responding to a Private Call . Group Call You may transmit a Group Call through any of the following methods. Transmit a call to the preset contacts. Hold down PTT Key to transmit a Group Call to a Group Call contacts preset for the current channel in home screen. (By the Group Knob to select a group you want to call) Transmitting a Group Call to “Contracts List--Contacts ” 1.Press Menu Key to Main Menu 2.Go to“Contracts List--Contacts ” 3.Use the Up/Down Key to select the Group Call contacts you want to call. 4.Use P1 Key or PTT Key to transmit a group call. Transmitting a Group Call through manual input 1.Input a group call number you want to call in the home screen. 2.Press PTT Key,P1 Key or Dail Keypad # to transmit a group call Ending Call 1.Nobody hold down PTT Key for a long time ,and this radio will end call automatically when silence period expires . 2.This radio will end call when the total calling time expires the preset time. 3.During calling, any party of calling or called hang up. 4.Base station signal lost. Transmitting a call through Redail List or Call Backlist 1.Use P1 key ,to go to Call Logs List or press P2 Key to select Group Call number you want to call. 2.Use P1 key or PTT Key to transmit a group call. 25 MPT Trunking Function and Opertaions Receiving and Responding to a Group Call Call Duration After setting up a Group Call ,Both the calling party LCD and the called party LCD will display Call Duration in time . Unit is “Minutes :Seconds.”(As shown) When a Group Call is received ,your radio set up call automatically and sounds “De”,your radio will display the icon . (As shown above) The first line display the coming call alias or ID. Late Access After set up group call,this radio allows the member haven’t joined in this group transmit this call during calling . Voice Communication After set up a Group Call ,Both the calling party and the called party are in the PTT allowing interface. You can hold down PTT key to transmit a call. 26 ● The calling party LCD . To count up the Call Duration by count -down,the starting time of count-down time is the total lasted talking time. This time is preset time via system configuration . When the total lasted calling time expires the preset time , this radio will return back from calling and end this call. ● The called party LCD To count up the Call duration time by occurred time ,the start time from 0. To count up from the called party access to Group Call . Recount up by count-down requires when the called party end Group Call and access this group through“Late Access” MPT Trunking Functions and Operations Ending a Call 1.Nobody hold down PTT Key for a long time ,and this radio will end call automatically when the silence period expires. 2.This radio will end call when the total calling time expires the preset time. 3.During calling, the calling party hang up. 4.Base station signal lost. All Call Two types of All Call are Team All Call and Whole Network All Call. Team All Call 999is the last one Group Call number in this team ,When you initiate a team All Call,all member in this team will receive and respond to this call . Three methods are aviaible for transmitting a Team All Call : Transmitting a call to preset contacts ,transmitting a call through group call contacts or through manual input number . The specific operation is the same as the Group Call. Emergency Call Emergency Call can be Emergency Private Call or Emergency Group Call . The following two methods are available to initiate a Emergency Call. 1.Press Emergency Call Key to initiate a Emergency Call. The called number can be set via programming software in trunking mode . 2.Through manual input number to initiate a Emergency Call. (Add *9* before number ). Use P1 key ,PPT Key or # key to initiate a call. Broadcast Call Broadcast Call only can be Broadcast Group Call . Only the calling party has the rights of speech. You may initiate Broadcast Call through manual input . (Add *11* before number ). Use P1 key ,PTT Key or # key to initiate a call. Priority Call System All Call When you transmit a System All Call ,all user in this system will join in this call. 1981is the number of System All Call. Three methods are aviailable for transmitting a System All Call : Transmitting a call to preset contacts ,transmitting a call through group call contacts or through manual input number . (Add * Key before 1981). Via programming software configuration to set a Priority Call level:Low ,Middle ,High or Preempted Call . You may initiate Priority Call through manual dail (Add *8* before number). Use P1 Key , PTT Key or # key to initiate a call. Dispatch Station Call This radio can call the Dispatch Station. The number of Dispatch Station are based on configuration. 27 MPT Trunking Functions and Operations MPT Public Network Calling The calling with Public network phone is called MPT public network Call. For your better use ,for example as follow. House Fixed Telephone fixexed fixr Dail fixed telephone number directly Such as dial 8036 directly External Fixed Telephone Add 0 before telephone number Such as 00755-33010296 Making Local Mobile Telephone Call Add 0 before telephone number Such as 013112345678 Making Nonlocal Mobile Telephone Call Add 00 before telephone number Such as 0013112345678 DMR trucking mode radio initiate a call to DMR-MPT is the same as the above operations. Receiving and Responding to a Call In DMR trunking mode ,When a group call /private call is received , your radio set up calling automatically and a alert ton“De” sounds. The group alias or ID mumber will display on the first line of screen and private calling group name or private ID number will display on the last line. . Late Access MPT-DMR Call Base on the appropriate MPT-DMR group call number figurated by basestation ,you can achieve MPT trunking radio call DMR trunking mode radio each other. After setting up group call,this radio allows the member haven’t joined in this group transmit this call during calling . Call Logs MPT trunking radio transmit a MPT-DMR call In MPT trunking mode ,you may transmit a MPT-DMR Call through any of the following methods. 1,Transmitting a call to the preset contacts. 2,Transmitting a call through Group Contacts . 3,Through manual input.(Specific operation is the same as group call) Note: In DMR Trunking mode ,your radio must wait to the corresponding group. (No need wait in this group when the DMR corresponding group is the responsing group ). 28 This radio can save up to 200 call entries.When the entries list is full,the earliest entry will be over written by latest one automatically. To view, delete, or delete all after selecting one call entries . MPT Trunking Functions and Operations Redial List and Callback List Use P1 P2 key to access "Redail List "and"Callback List”. This radio can save up to 10 call entries .When the entries list is full,the earliest entry will be overwritten by latest one. Redail List All outgoing call list will be save in the Redial List . Use P1 key to access this item in home screen. (As shown) Use P1 Key or PTT Key to select the outgoing entries to initiate a call,delete it or delete all . Callback List The Callback List will save up all the incoming entries To access this item ,Use P2 key in the home screen (As shown). Use P2 key or PTT key to initiate a call ,delete it or delete all. 29 Digital Conventional Functions and Operations Private Call,Group Call and all Call Transmitting a Private Call You may transmit a Private Call through any of the following methods. Transmitting a call through Contacts List or Call Logs. 1. Go to"Contacts List-Contacts ",Or go to "Call Logs" and access to the Outgoing/Incoming/Missed list. 2.Use Up /Down Key to select a Private Call Contacts you want to call. 3.Hold down PTT Key to transmit a Private Call through manual input 1.Go to" Contacts-Manual Dial” 2.Input a Private Call number you want to call. 3.Hold down the PTT key to transmit a Private Call. Transmitting a Group Call You may transmit a Group Call through any of the following methods. Transmitting a Call through Contacts List or“Call Log. 1.Go to“Contacts List—-Contacts ”or through“CallLog”to go to Outgoing/Incoming /Missed Call. 2.Use the Up/Down Key to select a Group Call contacts you want to call. 3.Hold down PTT key to select a Group Call Contacts you want to call. 30 Transmitting an All Call You may transmit a private and an All Call through any of the following methods. Transmitting an All Call through Contacts List or “Call Log. 1.Go to“Contact List—-Contacts”or through“Call Log”to go to Outgoing/Incoming /Missed Call list. 2.Use the Up/Down Key to select an All Call contacts you want to call. 3.Hold down PTT key to Transmit an All Call. Note:All call ID is a fixed ID. Emergency Call Meet an emergency, you can use this function to search companion or control center for help. If you need in a certain channel enabled on emergency call function, you must configure via programming software. This channel is relevant to one call ,only press"TK"key for long time to transmit a emengency call . Digital Conventional Functions and Operations Message To access the Menu,press Menu key to go to Main Menu to select“message”. b、When the message sent unsuccessful, the icon"！" will appear and please send again. The OutBox can save up to 100 sent messages. When the OutBox is full,the earliest message will be overwriten by the lastest one automatically. 3、Drafts This radio can save up the edited message into Drafts. The Drafts can save up to 10 draft message.When the Drafts is full, the earliest message will be over written by the latest one automatically. 1、Inbox This radio can save the received messages into Inbox. The Inbox can save up to 100 received messages. When the Inbox save up to 90 received messages ,and go on receiving messages, this radio will appear notes“Inbox will be full, please delete message”and the earliest message will be over written by the latest one automatically. 2、Outbox This radio can save the sent messages into Outbox. Each message will appear appropriate Iron to note message send successfully or not . a、When the message sent successfully, the icon"√"will appear. 4、New Message You can create new text message(179 characters at most) and send it to an individual user or to a talk group. 5、Preset Message Under this option there are some text messages(10 entries at most )preset by your dealer.You can choose and send any entry. 6、Status Msg Under this option there are some text message(95 entri es at most ) preset by your dealer.You can choose and send any entry .The status Msg is status code. 31 Digital Conventional Functions and Operations Call Logs To access this menu,press Menu key to Main Menu and select"Call Logs,or press the shortcut key for Call Logs directly. This radio can save up to 200 call entries. When the entries list is full, the earliest entry will be overwritten by latest one automatically. After accessing a list and selecting an entry ,you can perform any of these operations :hold down the PTT key to initiate a call, add it to Contact List ,or delete it . To delete all entries in the Outgoing /Iincoming/Missed list at a time,select Call Logs-Outgoing /Incoming/Missed-Delete All. 32 Zone Zone is a channel group,you can list the same channel in a zone. This function will help you manage the current channel. This radio supports up to 16 zones. Each zone up to 32 channels. You can select your desired zone as following methods. 1、You can use this menu to select your desired zone To access “Zone”，Press Up/Down key to select the Zone,then press OK Key to switch to the desired zone. 2、You can use the programming Key to select your desired zone. If you preset Zone Up /Zone Down shortcut key, press this key to switch to desired zone. Analog Conventional Functions and Operations Squelch Level You can select the squelch Level by menu from Strengthen , Normal and Always On . Or press Squelch level Switching programmable Key to switch the level. This radio default at Norma generally.Strengthen requires the receipt signal high enough to turn on the speaker . When the level set at Normal (Squelch level is 0) this radio will turn on the speaker directly automatically and sounds the background voice . 33 Optional Accessories The following items are the main optional accessories for the prodct and please consult your local dealer for more other accessories. Smart Bluetooth Earphone EEWB011 Smart Bluetooth Earphone EEWB011 Bluetooth Earphone EEWB021 C type earphone EEHN011 Bluetooth PTT EPTTB01 Remote Speaker Microphone EMRN011 USB Programming Cable EPC01 Hang Rope ESN01 Caution:Use the accessories specified Excera only.If not,Excera shall not be liable for any losses or damages arising out of use of unauthorized accessories. 34 Troubleshooting Phenomena Solution Analysis The battery may be improperly installed Remove the battey and attach it again. The battery may run out Recharge or replace the battery The battery may suffer from poor contact caused by dirtied or damaged battery contacts Clean the battery contacts, if the problem can not be solved, contact your dealer or authorized service center for inspection and repair. The radio can not detect the basestaion signal. Make sure the radio in base station effective signal range. The radio is not the basestation legal user ,can not be regisitered. Contact person who are in charge of this base station,make sure the radio are the legal user of base station NMS Repeated registration During receiving signal is discontinuous. Make sure the radio in base station effective signal range. The Radio Can not transmit and respond call. During receiving signal is weak. Make sure the radio in base station effective signal range. No voice when transmiting and responding call. The radio ID may be repeated Contact person who are in charge of this base station, make sure no the radio ID are repeated of base station NMS. The responding party is inactive repeatly during calling. Signalis discontinuous,get access to transmitting again after signal is totally inactive. The Radio Can not be powered on. The Radio can not be regisitered. During receiving signals, the voice is weak discontinuous or totally inactive. You can not communicate with other members Irrelevant communiction or noise is heard on the channel The noise is too lound. Make sure the radio in basestaion effective signalrange. The battery strength may be too low. Recharge or replace the battery. The volume may be set to a low level. Increase the volume by Volume Control Knob. The antenna may be get loose or may be improperly installed. Power off the radio ,and re-install the antenna. The speaker may be blocked or damaged Clean surface of the speaker.If the problem can not be solved,contact your dealer or authorized service center for inspection and repair. The poor quality of communication signals Make sure all member in the effective communication range. The poor quality of communication signals Make sure all member in the effective communication range. The poor quality of communication signals Make sure all member in the effective communication range. You may suffer from external disturbance (such as electromagnetic interference). Move to an open and flat area,and restart the radio. You may be at an unfavorable position.For example,your communication may be blocked by high buildings or frustrated in the underground areas. Stay away from equipment that may cause interference. If the above solutions can not fix your problems,or you may have some other queries,please contact us or your local dealer for more technical support. 35 Warranty and Maintains Scope of Warranty Ep8100 radio and acessories. Warranty Details 1.From the date of purchase and without any artificial damage, Warranty varies based on product types . We will provide 36 months warranty service for main radios and 12 months warranty service for battery ,charger ,adapter and other standard accessories etc. 2.Completes Warranty Card or provides valid original invoices or receipts for warranty judgment .This invoice or receipt shall indicate radio accessories, radio serial number ,purchase date and amount. 3.Products problem caused by non-artificial can return, exchange or repair within 7 days. 15 days can be a replacement or repair, more than 15 days and within the warranty can be free repair. 4.We provide life-long maintenance service for customer .For products beyond the warranty, we still can continue to provide repair and maintenance services and will charge for those service. Non-Warranty Service 1.Defect or damage is due to improper use of the product, including but not limited to the defects and damage caused by using this product without complying with the warning or user manual. 2.Defect or damage due to remake, change and disassembly or make use of non-original accessory or battery without the authorization of Excera. 3.Defect or damage is due to force majeure (earthquake, flood disaster, fire disaster, etc.) 4.Cannot produce valid warranty certifications (Warranty Card, Invoice or Receipt etc.) 5.By the rational judgment of Excera, serial number code label, the accessory date code label or relevant Excera a sign of a product has been removed, defaced or altered. 6.Fair wear and tear. 7.Battery in the following circumstances: 1)Any artificial damage or unsealed phenomenon of battery case seal. 2)Defect or damage due to the charging or using at variance with the products prescribed. 36 Disclaimer The company endeavors to achieve the accuracy and completeness of this manual,but no warranty of accuracy or reliability is given. All the specifications and designs are subject to change without notice due to continuous technology development. No part of this manual may be copied ,modified,translated,or distributed in any manner without the express written permission of us. 37 Warranty Card Purchase Information: Customer Name: Customer Phone: Customer Address: Radio Information: Radio Model Number: Radio Serial Number: Note: This Warranty Card is applicable to the above serial number radio and accessories service. Please properly keep the warranty card, please show this card and related invoice when enjoy this service. This card shall become effective after dealer affixed their seals to it . Any artificial damage belong to the non-warranty scope, please see the specific warranty scope as stated in "service policy". 38 Please tear from the Dotted line Purchase Date:
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Author : 李金爱 Create Date : 2015:07:24 09:53:01+08:00 Modify Date : 2015:07:31 10:50:36+08:00 XMP Toolkit : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00 Format : application/pdf Creator : 李金爱 Title : EP8100说明书 - 认证.cdr Creator Tool : CorelDRAW X6 Metadata Date : 2015:07:31 10:50:36+08:00 Producer : Corel PDF Engine Version 16.1.0.843 Document ID : uuid:fd68591f-9230-47a7-9004-6196431af6f8 Instance ID : uuid:e0c8f74a-2ce4-4fc6-a04c-6acffb27954d Page Count : 39 Profile CMM Type : Lino Profile Version : 2.1.0 Profile Class : Display Device Profile Color Space Data : RGB Profile Connection Space : XYZ Profile Date Time : 1998:02:09 06:49:00 Profile File Signature : acsp Primary Platform : Microsoft Corporation CMM Flags : Not Embedded, Independent Device Manufacturer : IEC Device Model : sRGB Device Attributes : Reflective, Glossy, Positive, Color Rendering Intent : Perceptual Connection Space Illuminant : 0.9642 1 0.82491 Profile Creator : HP Profile ID : 0 Profile Copyright : Copyright (c) 1998 Hewlett-Packard Company Profile Description : sRGB IEC61966-2.1 Media White Point : 0.95045 1 1.08905 Media Black Point : 0 0 0 Red Matrix Column : 0.43607 0.22249 0.01392 Green Matrix Column : 0.38515 0.71687 0.09708 Blue Matrix Column : 0.14307 0.06061 0.7141 Device Mfg Desc : IEC http://www.iec.ch Device Model Desc : IEC 61966-2.1 Default RGB colour space - sRGB Viewing Cond Desc : Reference Viewing Condition in IEC61966-2.1 Viewing Cond Illuminant : 19.6445 20.3718 16.8089 Viewing Cond Surround : 3.92889 4.07439 3.36179 Viewing Cond Illuminant Type : D50 Luminance : 76.03647 80 87.12462 Measurement Observer : CIE 1931 Measurement Backing : 0 0 0 Measurement Geometry : Unknown Measurement Flare : 0.999% Measurement Illuminant : D65 Technology : Cathode Ray Tube Display Red Tone Reproduction Curve : (Binary data 2060 bytes, use -b option to extract) Green Tone Reproduction Curve : (Binary data 2060 bytes, use -b option to extract) Blue Tone Reproduction Curve : (Binary data 2060 bytes, use -b option to extract)EXIF Metadata provided by EXIF.tools