Extech Instruments Easy View Digital Light Meter Ea31 Users Manual

2015-02-06

: Extech-Instruments Extech-Instruments-Easy-View-Digital-Light-Meter-Ea31-Users-Manual-541782 extech-instruments-easy-view-digital-light-meter-ea31-users-manual-541782 extech-instruments pdf

Open the PDF directly: View PDF PDF.
Page Count: 7

DownloadExtech-Instruments Extech-Instruments-Easy-View-Digital-Light-Meter-Ea31-Users-Manual EA31
Open PDF In BrowserView PDF
User's Guide

EasyView Digital Light Meter

Model EA31

Introduction
Congratulations on your purchase of the Extech EasyView Digital Light Meter
which measures the amount of light falling on a surface (illuminance) in Footcandles or Lux. This device measures up to 20,000 Fc and 20,000 Lux. Careful
use of this meter will provide years of reliable service.

Specifications
Units

Ranges and
Resolution

Lux

20.00, 200.0, 2000,
20.00kLux

Foot-candles

20.00, 200.0, 2000,
20.00kfc

Accuracy

± (3% rdg + 0.5% FS)
±( 4% rdg + 0.5% FS, if > 10,000lux or
1,000fc)

General Specifications
Display
Over range indication
Spectral response

3-1/2 digit, 2000 count LCD
LCD displays ‘OL’
CIE photopic (CIE human eye response curve),
Cosine corrected
Spectral accuracy
CIE V function (f’1 ï 6%)
Measurement Repeatability ±2%
Calibration
Calibrated to a standard incandescent lamp at
color temperature 2856ºK
Temperature coefficient
±0.1% per oC
Sampling rate
2.5 times per second
Photo detector
Silicon photo-diode and spectral response filter
Operating conditions
Temperature: 32 to 104oF (0 to 40oC); Humidity: <
80% RH
Storage conditions
Temperature: 14 to 140oF (-10 to 50oC); Humidity:
< 80% RH
Dimensions
5.91 x 2.8 x 1.4" (150 x 72 x 35mm)
Weight
Approx. 11.3 oz. (320g) with battery
Photo Detector Dimensions 3.62 x 2.36 x 1.14” (92 x 60 x 29mm)
Detector cable length
3’ (91cm) approximately
Low battery indication
“BT” appears on the LCD
Power supply
6 ‘AAA’ cells; Battery life approx 400 hours
2

EA31 V2.0 06/06

Meter Description
1.
2.
3.
4.
5.
6.
7.

LCD display
Range button
Power ON/OFF button
lux / fc selection button
Data HOLD button
MAX/MIN button
Photo sensor (lens cover not shown)
(Tripod mount on rear of sensor)

Note: Battery compartment is located
on the rear of the instrument

Spectral Sensitivity

3

EA31 V2.0 06/06

Operation
Power ON or OFF
Press the
button to turn power on or off.
Units of measure
Press the lux / fc button to select the unit of measure. “fc” or “lux” will appear in
the display.
Light sensor
1. The light sensor is attached to the meter with a coiled cable which allows
placement of the sensor up to approximately 3 feet from the meter.
2. The light sensor is a silicon photo diode and resides under the white domed
lens.
3. To protect the lens from scratches, keep the protective cap on the sensor
whenever the unit is not in use.
4. The back of the sensor has a tripod mounting hole.
Taking measurements
1. Remove the protective cap from the sensor.
2. Place the sensor in a horizontal position at the measurement location.
3. Read the light level on the display. If the light measurement is out of range an
“OL” indication will appear on the display. If the ‘OL’ appears, select a higher
range by pressing the RANGE button.
MX MN Function
1. Press the MX/MN button once to put the meter in MX/MN mode. The meter
will now display the highest reading that occurs while the function is enabled.
The “MAX” icon will appear in the display.
2. Press the MX/MN button again to display the lowest reading that occurs while
the function is enabled. The “MIN” icon will appear in the display.
3. Press MX/MN again to toggle between the MAX and MIN readings.
4. To exit the MX MN mode and return to the normal real time display, press
and hold the MX/MN button (2 seconds) until the MAX and MIN icons
disappear.
Data Hold
Press the HOLD button to freeze the displayed reading. The 'H' hold icon will
appear on the display. Press the HOLD button again to return to normal
operation.

4

EA31 V2.0 06/06

Reference
Foot candles

Lux

Typical Light Levels

>10000

>107600

1000 to 10000

10760 to 107600

Sunlight
Operating Table
Assembly (fine)

100 to 1000

1076 to 10760

Football stadium
Emergency room
Drafting table
Overcast day
Assembly (general)
Classroom

10 to 100

107 to 1076

Casual reading
Shipping area
Stairwell
Auditorium
ATM machine

1 to 10

10.7 to 107

Storage room
Building entrance
Parking lot
Highway

0 to 1

0 to 10.7

f
Full moon

Foot-candle / Lux conversion
1 lux = .09290 foot-candles
1 foot-candle = 10.764 lux

5

EA31 V2.0 06/06

Maintenance
Cleaning and storage
1. The white plastic sensor dome should be cleaned with a damp cloth when
necessary.
2. Store the meter in an area with moderate temperature and humidity (refer to
the operating and storage range in the specifications chart earlier in this
manual).
Battery Replacement
When the battery voltage is low the ‘BT’ symbol will appear on the display.
Replace the six (6) 1.5 ‘AAA’ batteries by removing the rear (center) battery
compartment screw and accessing the battery compartment. Observe polarity
when placing the batteries in the compartment. Ensure that the compartment
cover is securely fastened when finished.
Calibration and Repair Services
Extech offers repair and calibration services for the products we sell. Extech also
provides NIST certification for most products. Call the Customer Service
Department for information on calibration services available for this product.
Extech recommends that annual calibrations be performed to verify meter
performance and accuracy.

6

EA31 V2.0 06/06

Warranty
EXTECH INSTRUMENTS CORPORATION warrants the basic instrument to be free of defects in parts and
workmanship for one year from date of shipment (a six month limited warranty applies on sensors and cables). If it
should become necessary to return the instrument for service during or beyond the warranty period, contact the
Customer Service Department at (781) 890-7440 EXTENSION 210 for authorization or visit www.extech.com for
more information. A Return Authorization (RA) number must be issued before any product is returned to
Extech. The sender is responsible for shipping charges, freight, insurance and proper packaging to prevent
damage in transit. This warranty does not apply to defects resulting from action of the user such as misuse,
improper wiring, operation outside of specification, improper maintenance or repair, or unauthorized modification.
Extech specifically disclaims any implied warranties or merchantability or fitness for a specific purpose and will not
be liable for any direct, indirect, incidental or consequential damages. Extech's total liability is limited to repair or
replacement of the product. The warranty set forth above is inclusive and no other warranty, whether written or
oral, is expressed or implied.

Support line (781) 890-7440
Technical support: Extension 200; E-mail: support@extech.com
Repair & Returns: Extension 210; E-mail: repair@extech.com
Product specifications subject to change without notice
For the latest version of this User’s Guide, Software updates, and other
up-to-the-minute product information, visit our website: www.extech.com

Copyright © 2004 Extech Instruments Corporation.
All rights reserved including the right of reproduction in whole or in part in any form.

7

EA31 V2.0 06/06



Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 7
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:f2e59766-1956-4693-89a6-55de9bee7d21
Producer                        : Acrobat Distiller 6.0 (Windows)
Create Date                     : 2006:06:22 11:56:21-04:00
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2006:06:22 11:56:43-04:00
Metadata Date                   : 2006:06:22 11:56:43-04:00
Document ID                     : uuid:5884b392-a4d4-4354-866c-befc174c3fa6
Format                          : application/pdf
Title                           : Microsoft Word - EA31.doc
Creator                         : sandy.goranson
Author                          : sandy.goranson
EXIF Metadata provided by EXIF.tools

Navigation menu