Extreme Networks BLE4 Digital Broadcasting Device (iBeacon/Eddystone) User Manual

Extreme Networks, Inc. Digital Broadcasting Device (iBeacon/Eddystone) Users Manual

User Manual

www.extremenetworks.com1Extreme NetworksModel:Model: BLE-4Part # Description36505 LBS-BLE-4AU Bluetooth beacon - 4 alkaline batteries - not provisioned36506 LBS-BLE-4APBluetooth beacon - 4 alkaline batteries - fully provisioned36507 LBS-BLE-4LU Bluetooth beacon - 4 lithium batteries - not provisioned36508 LBS-BLE-4LPBluetooth beacon - 4 lithium batteries - fully provisioned36515 LBS-BLE-4AU-8Bluetooth beacon - 4 alkaline batteries - not provisioned (8-Pack)36516 LBS-BLE-4AP-8 Bluetooth beacon - 4 alkaline batteries - fully provisioned36517 LBS-BLE-4LU-8Bluetooth beacon - 4 lithium batteries - not provisioned36518 LBS-BLE-4LP-8 Bluetooth beacon - 4 lithium batteries - fully provisionedDigital Broadcasting Device (iBeacon/Eddystone)
www.extremenetworks.com2Extreme NetworksThe MaxBeacon BLE-4 is a new generation super-long range and waterproof beacon that loadedBluetooth4.0 hardware platform and MiniBeacon intelligence software.MaxBeacon BLE-4 advertises standard iBeacon. The user can configure MaxBeacon via configuration appBeaconSET as well.The enhanced MaxBeacon has 10800mAh battery capacity and advertises data up to 200 meters in openspace, it can works at the range of temperature -40 to 70℃.FEATURE- Advertise iBeacon & Eddystone simultaneously- Unique MAC address (ITU)- Bluetooth 4.0 chipset nRF51 series- IP66 Waterproof- 5 years battery lifetime with default setting- Replaceable AA battery (default:alkaline)- The max. 200 meters advertisingdistance- Operation temperature -40 to 70℃MaxBeaconAPPLICATION- Asset tracking- Indoor location- Activity monitoring- Inventory trackingCONFIGURATION TOOL- BeaconSET+ (IOS & Android);ACTIVATE- Pressing the “On/Off” push button and keep holding on 3 seconds;- The MaxBeacon has been activated after LED lighted on 3 seconds then off;CERTIFICATION- iBeacon MFi License (iBC-14-00582)- FCC Regulation (FCC Part 15.)- CE Regulations (Included EN300328/301489/60950/62479)
www.extremenetworks.com3Extreme NetworksELECTRONIC PARAMETERItemValueRemarksCase Colorwhite, blackOther colors can be customizedBattery Model3.0V4pcs 1.5V Alkaline battery, total 4400mAh3.6V4pcs 3.6V Li-SOCI2 battery, total 10800mAhOperation Voltage1.8-3.9VDCTransmission Power-30 to +4dBmTx powerTransmission Circuit5.3mA (Max.)Tested @ 0dBm Tx power, standard version110mA (Max.)Tested @ 4dBm Tx power, enhanced versionTransmission Range200 metersTested @ 4dBm Tx power, standard versionAntenna50ohmOn board / PCB AntennaAccessoriesDouble adhesive1pc, high-strength, 3M brand;Net Weight109.0gWith batterySize72 x 72 x23 mmNullPARAMETER SETTINGEach MaxBeacon BLE -4 has been pre-configured in the factory before the shipment. Here below is giventhe main parameters and default settings.
www.extremenetworks.com4Extreme NetworksPACKING INFORMATIONImage 2DetailsPackage BoxCartonQuantity8pcs per package box80pcs per cartonNet Weight0.87kg8.7KgGross Weight0.95Kg10.5KgSize30.5 x 11 x 7.5 cm32 x 23 x 40 cmFirmware Flash1. J-LINK Programmer Kit;2. Programming ports definition;DECLARATIONThe contents of this datasheet are subject to change without prior notice for further improvement.Minew team reserves the right to explain all the terms of this datasheet.<END>
FCC WARNING This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum 20cm distance between the radiator your body: Use only the supplied antenna.
IC Caution: RSS-Gen Issue 5 March 2015"&"CNR-Gen 5e March 2015: - English: This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device. - French: Le présentappareilestconf orme aux CNR d' Industrie Canada applicables aux appareils radio exempts de licence. L'exploitationestautorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l' utilisateur de l'appareildoit accepter tout brouillageradioélectriquesubi, mêmesi le brouillageest susceptible d'encompromettre le fonctionnement. Pour rester en conformité avec les lignes directrices pour l’exposition aux radiations de la ISED, le dispositif doit être installé et opérationnel à une distance minimale de 20cm entre le radiateur et votre corps: uniquement avec l’antenne fournie. 

Navigation menu