Extreme Networks RBTBF Wireless LAN PC card User Manual 80211aPCcardInstall

Extreme Networks, Inc. Wireless LAN PC card 80211aPCcardInstall

Contents

Updated Manual

802.11a PC Card Installation and Specifications9033774 DRAFTENJOY THE FREEDOM OF WIRELESS NETWORKINGENTERASYS.COM™
NOTICEEnterasys Networks reserves the right to make changes in specifications and other information contained in this document and its web site without prior notice. The reader should in all cases consult Enterasys Networks to determine whether any such changes have been made.The hardware, firmware, or software described in this document is subject to change without notice.IN NO EVENT SHALL ENTERASYS NETWORKS BE LIABLE FOR ANY INCIDENTAL, INDIRECT, SPECIAL, OR CONSEQUENTIAL DAMAGES WHATSOEVER (INCLUDING BUT NOT LIMITED TO LOST PROFITS) ARISING OUT OF OR RELATED TO THIS DOCUMENT, WEB SITE, OR THE INFORMATION CONTAINED IN THEM, EVEN IF ENTERASYS NETWORKS HAS BEEN ADVISED OF, KNEW OF, OR SHOULD HAVE KNOWN OF, THE POSSIBILITY OF SUCH DAMAGES.Enterasys Networks, Inc.35 Industrial WayRochester, NH 03867© 2003 Enterasys Networks, Inc. All rights reserved. Part Number: 903xxxx DRAFT FEB 28-03Enterasys Networks and ROAMABOUT are registered trademarks and ENTERASYS ROAMABOUT, and any logos associated therewith, are trademarks of Enterasys Networks, Inc. in the United States and other countries.Microsoft, Windows, and Windows NT are trademarks or registered trademarks of Microsoft Corporation in the United States and other countries.PC Card is a trademark of PCMCIA in the United States and other countries.All other product names mentioned in this manual may be trademarks or registered trademarks of their respective companies.
Regulatory InformationExposure to Radio Frequency Radiation. The radiated output power of the IEEE 802.11 RoamAbout PC Card is far below the FCC radio frequency exposure limits. Nevertheless, the RoamAbout PC Card shall be used in such a manner that the potential for human contact during normal operation is minimized. This 802.11a RoamAbout PC Card is intended for indoor use only. Interference Statement. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.This equipment generates, uses, and can radiate radio frequency energy. If not installed and used in accordance with the instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the distance between the equipment and the receiver.• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.• Consult the dealer or an experienced radio or TV technician for help.Enterasys Networks is not responsible for any radio or television interference caused by unauthorized modification of the devices included in this kit, or the substitution or attachment of connecting cables and equipment other then specified by Enterasys Networks. The correction of interference caused by such unauthorized modification, substitution or attachment will be the responsibility of the user.For country-specific approvals, please consult the Radio Certification and Regulatory Information document included in this kit. Visit the RoamAbout Wireless web site for updated country approvals. Canada - Industry Canada (IC). This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. cet appareil de la class B respecte toutes les exigences du Reglement sur le matereil brouiller du Canada.CAUTION: Changes or modifications made to this device which are not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Getting HelpFor additional support related to this device or document, contact Enterasys Networks using one of the following methods:Before contacting Enterasys Networks for technical support, have the following information ready:• Your Enterasys Networks service contract number • A description of the failure• A description of any action(s) already taken to resolve the problem• The serial and revision numbers of all involved Enterasys Networks products in the network• A description of your network environment (layout, cable type)• Network load and frame size at the time of trouble (if known)• The device history (for example, have you returned the device before, is this a recurring problem, etc.)• Any previous Return Material Authorization (RMA) numbersWorld Wide Web: www.enterasys.com/supportPhone: (603) 332-94001-800-872-8440 (toll-free in the U.S. and Canada)For the Enterasys Networks Support toll-free number in your country: www.enterasys.com/support/gtac-all.htmlInternet mail: support@enterasys.comTo send comments or suggestions concerning this document to the Technical Writing Department: TechWriting@enterasys.comMake sure to include the document Part Number in the email message.
1RoamAbout 802.11a PC CardThis document provides the system requirements, installation procedure, and technical specifications for the RoamAbout 802.11a PC Card. Before installing the PC Card, please review the Regulatory information included in the RoamAbout Radio Certification and Regulatory Information document included with the PC Card. System RequirementsWhen you install the RoamAbout PC Card, you must also install its driver. You can also download the RoamAbout driver and documentation from the RoamAbout wireless web site: www.enterasys.com/wirelessCheck the RoamAbout wireless web site frequently for driver updates. If you download a driver from the web, refer to that driver’s release notes and readme file for the instructions to extract and install the driver. The RoamAbout PC Card Driver CD contains the driver and installation information for the following operating systems.•Windows NT V4.0 or later. If you are using Windows NT V4.0, you also need Service Pack 4 or later.•Windows 98•Windows Me•Windows 2000•Windows XP
2 PC Card InstallationTo install the PC card, perform the following steps:1. Insert the PC Card in the PC Card slot, if available.2. If the system does not have a PC Card slot, install the optional PCI Carrier Card. The installation instructions are in the PCI Carrier Card kit.3. Refer to the driver readme file for your operating system to install the driver. The readme file is on the PC Card Driver CD, or, if you downloaded the driver, the directory where you downloaded the files.ENJOY THE FREEDOM OF WIRELESS NETWORKINGWIRELESS LANS802.1 DS High RateHi-Gigabit Matched AdapterWiFi
3Technical SpecificationsThis section provides the specifications for the RoamAbout IEEE 802.11a PC Card. The PC Card is WiFi Certified.Radio CharacteristicsConsult your authorized RoamAbout reseller sales office for information about the radio regulations that apply in your country. Table 1 shows the radio characteristics for the 802.11a PC Card. Table 1: 802.11a Radio CharacteristicsCharacteristic Value R-F frequency band 5 GHz (5.15 - 5.35 GHz)Number of selectable channels for North America and countries supporting FCC 8 (-AX variant)4 (-AL, -AM, and -AJ variants)Modulation technique OFDM Modulation (BPSK, QPSK, 16 QAM, 64 QAM)Bit error rate Better than 10-5Receiver sensitivity at 54 Mbit/s -69dBmReceiver sensitivity at 48 Mbit/s -70dBmReceiver sensitivity at 36 Mbit/s -75dBmReceiver sensitivity at 24 Mbit/s -80dBmReceiver sensitivity at 18 Mbit/s -83dBmReceiver sensitivity at 12 Mbit/s -86dBmReceiver sensitivity at 9 Mbit/s -88dBmReceiver sensitivity at 6 Mbit/s -88dBmIntegrated antenna up to 4.5 dBiOutput power 14 dBmReceive Mode 430 mATransmit Mode 540 mAPower Supply 3.3 V
4 Physical SpecificationsTable 2: RoamAbout 802.11a PC Card Physical SpecificationsSupported Frequency Sub-BandsThe RoamAbout PC Card supports a number of factory-programmed channels. The number of available frequencies is subject to local radio regulations as defined by local authorities. In RoamAbout infrastructure environments, the RoamAbout PC Card automatically starts operation at the frequency channel that is used by the RoamAbout AP. This frequency is controlled by the LAN administrator who sets the RoamAbout AP configuration. Table 3 shows the channel IDs and frequencies for the 802.11a PC Card. The factory-set default is printed in bold. Table 3: IEEE 802.11a RoamAbout Channel SetsThe -AX variant of the PC card uses all 8 channels. The -AL variant of the PC card only uses channels 36, 40, 44, and 48. The -AM variant of the PC card only uses channels 52, 56, 60, and 64. The variant for Japan (-AJ) uses 4 different channels, as shown in Table 4.Specification ValueDimensions (LxWxH) 114 x 54 x 9.65 mm (4.51 x 2.26 x 0.38 in)Weight 62.4 grams (2.2 oz)Temperature (Operation) -20o to 50o C (-4o to 122o F)Temperature (Storage) -30o to 66o C (-22o to 150.8o F)Humidity Maximum 95%, no condensation allowedChannel ID FCC 36 518040 520044 522048 524052 526056 528060 530064 5320
5Table 4: IEEE 802.11a RoamAbout Channel Set for JapanProduct SafetyUSA: UL 1950, UL ListedCanada: CUL 1950Europe: EN60950Japan: IEC 950Channel ID FCC 34 517038 519042 521046 5230

Navigation menu