Extreme Networks RBTBHAW 2.4/5 GHz IEEE 802.11g/a WLAN Cardbus card User Manual Manual 1106 16 bit IO PC Card
Extreme Networks, Inc. 2.4/5 GHz IEEE 802.11g/a WLAN Cardbus card Manual 1106 16 bit IO PC Card
Contents
Users manual 16 bits
![](/img.php?id=456140&img=bg1.png)
Agere SystemsEnterasys 1106 16 bit I/O PC CardCardBus
1106 CardBus 16 bit I/O PC Card
Preliminary User Manual
![](/img.php?id=456140&img=bg2.png)
Agere SystemsEnterasys 1106 16 bit I/O PC CardCardBus
![](/img.php?id=456140&img=bg3.png)
Agere SystemsEnterasys 1106 16 bit I/O PC CardCardBus
![](/img.php?id=456140&img=bg4.png)
Agere SystemsEnterasys 1106 16 bit I/O PC CardCardBus
![](/img.php?id=456140&img=bg5.png)
Agere SystemsEnterasys 1106 16 bit I/O PC CardCardBus
![](/img.php?id=456140&img=bg7.png)
Agere SystemsEnterasys 1106 16 bit I/O PC CardCardBus
Section: Regulatory Compliance Information
Information to the user
It is the policy of Agere Systems IncEnterasys. to provide customers with the latest
available information. All updates to this document will appear in the English version
first. This document provides regulatory information about Agere Enterasys wireless
LAN products.
This product can operate on channels in frequency bands in 2.4 GHz and 5 GHz ranges,
and uses DSSS (Direct Sequence Spread Spectrum) or OFDM radio technology. It is
designed to be inter-operable with similar wireless products that comply with:
- IEEE 802.11 b/g/a Standards on Wireless LAN, as defined and approved by the
Institute of Electrical and Electronics Engineers
- Wireless Fidelity (Wi-Fi) certification as defined by the Wi-Fi Alliance
formerly known as WECA (Wireless Ethernet Compatibility Alliance)
For the country and date of manufacturing, consult the identification label of your
wireless device.
1. Wireless LAN and your Health
Wireless LAN products are radio devices that emit radio frequency electromagnetic
energy. The level of energy emitted by Wireless LAN devices is much less than the
electromagnetic energy emitted by devices like for example mobile telephones. Because
Wireless LAN products operate within the guidelines found in radio frequency safety
standards and recommendations, Agere Enterasys believes this product is safe for use by
consumers. These standards and recommendations reflect the consensus of the scientific
community and result from deliberations of panels and committees of scientists who
continually review and interpret the extensive research literature.
See additional information for North America in section 2.1.
![](/img.php?id=456140&img=bg8.png)
Agere SystemsEnterasys 1106 16 bit I/O PC CardCardBus
Important Safety Instructions
When using this product, always follow the basic precautions to reduce the risk of fire,
electric shock and injury to persons, including the following:
1. Always install the product as described in the documentation that is included
with your product.
2. Do not use this product near water, for example, near a bathtub, washbowl, and
kitchen sink or laundry tub, in a wet basement or near a swimming pool.
3. Avoid using this product during an electric storm. There may be a remote risk
of electric shock from lightning
4. Do not use this product to report a gas leak in the vicinity of the leak.
SAVE THESE INSTRUCTIONS
![](/img.php?id=456140&img=bg9.png)
Agere SystemsEnterasys 1106 16 bit I/O PC CardCardBus
2. Regulatory Information
You must install and use this device in strict accordance with the manufacturer’s
instructions as described in the user documentation that is included with your product.
Before you start installation or use of this product, carefully read the contents of this
document for device specific constraints or rules that may apply in the country where
you want to use this product. The user must always ensure that country and/or channel
selection of Peer-to-Peer groups or Base Station Networks matches the regulations of the
country of operation.
In some situations or environments, the use of wireless devices may be restricted by the
proprietor of the building or responsible representatives of the organization.
These situations may for example include:
- Using the wireless equipment on board of airplanes, or
- In any environment where the risk of interference to other devices or services is
perceived or identified as harmful.
If you are uncertain of the policy that applies on the use of wireless equipment in a
specific organization or environment (e.g. airports), you are encouraged to ask for
authorization to use this device prior to turning on the equipment.
The manufacturer is mot responsible for any radio or television interference caused by
unauthorized modification of the device, or the substitution or attachment of connecting
cables and equipment other than specified by manufacturer. The correction of
interference caused by such unauthorized modification, substitution or attachment will
be the responsibility of the user.
The manufacturer and it authorized resellers or distributors are not liable for any damage
or violation that may arise from failing to comply with these guidelines.
2.1 North America
Canada – Industry Canada (IC)
The wireless radio of this device complies with RSS 210 of Industry Canada. This Class
B device complies with Canadian ICES-003 (NMB-003).
![](/img.php?id=456140&img=bga.png)
Agere SystemsEnterasys 1106 16 bit I/O PC CardCardBus
USA – Federal Communications Commission (FCC)
This device complies with Part 15 of FCC Rules. Operation of the device is subject to
the following two conditions: (1) this device may not cause harmful interference, and (2)
this device must accept any interference that may cause undesired operation.
Operation in frequency band 5150-5250 MHz is restricted to indoor environments
only.
Exposure to Radio Frequency Radiation
SAR (Specific Absorption Rate) compliance has been established and found
to comply in accordance with FCC OET Bulletin 65 and guidelines of IEEE
C95.1-1995.
Caution:
! To comply with the FCC RF Exposure compliance requirements, the
user is advised to maintain a distance of at least 13 mm from the
antenna of the device while in use
Federal Communications Commission Notice
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation.
![](/img.php?id=456140&img=bgb.png)
Agere SystemsEnterasys 1106 16 bit I/O PC CardCardBus
This equipment generates, uses, and can radiate radio frequency energy. If not
installed and used in accordance with the instructions, it may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning off and on, the user is encouraged to try and
correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna
• Increase the distance between the equipment and the receiver
• Connect the equipment to an outlet on a circuit different from that to which the
receiver is connected
• Consult the dealer or an experienced radio/TV technician for help.
The FCC requires the user to be notified that any changes or modifications to this
device that are not expressly approved by Agere Enterasys may void the user’s
authority to operate the equipment.