FCAR TECHNOLOGY MAXIBTVCI VCI User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3103705
Application ID	mmvnaeS5wr7FytrbdPUkyA==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	153.62kB (1920256 bits)
Date Submitted	2016-08-18 00:00:00
Date Available	2016-08-18 00:00:00
Creation Date	2016-08-16 16:06:54
Producing Software	Microsoft® Word 2010
Document Lastmod	2016-08-18 17:46:26
Document Title	User manual
Document Creator	Microsoft® Word 2010
Document Author:	A12202

Table of Contents
Statement...................................................................... 1
Introduction .................................................................. 2
Functional Description..................................................4
Product Troubleshooting ............................................. 7
Compliance Information ............................................. 12
Warranty And Service ................................................. 14
Statement

This manual is designed for the use of FCAR products; it cannot be copied
or stored in any form (electronic, mechanical, photocopying, recording or
otherwise) without prior written permission being secured from Shenzhen
FCAR Technology Co., Ltd.

This manual is intended for professional vehicle repair technicians.

This manual provides the operation methods for FCAR products only, and
the company accepts no responsibility for the consequences caused by
attempting to use the operation methods on other equipment.

This manual is written in accordance with the existing configuration and
functions of the product, and is subject to change without notice if the
product adds new configurations and functions.
If you have any questions, please contact us by the following ways:
Headquarters: 8F, Chuangyi Bldg., No. 3025 Nanhai Ave., Nanshan, Shenzhen,
China 518060
Factory: West 1F, Bldg. B, Hengchao Industrial Park, Tangtou North Ave.,
Bao'an, Shenzhen, China 518108
Tel: 0086-755-82904730
Fax: 0086-755-83147605
E-mail:marketing@szfcar.com
Website: http://www.fcar.com
Introduction
The Wireless Diagnostic Interface is a multi-brand device which comes with
the FCAR tool kit. It is designed to connect wirelessly with the FCAR
Display Tablet, as a vehicle communication interface (VCI) for vehicle data
transmission. Thanks to the wireless BT technology, with which you are
allowed to work freely around the vehicle.
This interface device can communicate with vehicles’ electronic control units
(ECUs), guaranteeing performance and speed that redefine multi-brand
diagnostics. The development of this interface has been focused on reducing
the communication time, and ensuring the tool is practical to use.
The FCAR diagnostic platform combines the VCI device and the display
tablet with technical information into ensuring quick and simple access to
the vehicle to perform comprehensive diagnostics applications.
Wireless Communication
The Wireless Diagnostic Interface supports BT communication. It can transmit
vehicle data to the FCAR Display Tablet without a physical connection. The
working range of the transmitter through BT communication is about 300 feet
(about 100 m). A signal lost due to moving out of range automatically restores
itself when the display unit is brought closer to the VCI unit.
For detailed information about VCI connection with the FCAR display tablet,
please refer to the FCAR User Manual.
USB Connectivity
The VCI device also provides a direct connection to the FCAR display tablet or
a PC via a USB 2.0 full-speed connection. All of the electronics are
contained in the device shell, making it a compact and rugged vehicle
communication tool.
Power Source
The Wireless Diagnostic Interface operates on 12-volt vehicle power, which it
receives through the vehicle data connection port. The unit powers on
whenever it is connected to an OBD II/EOBD compliant data link connector
(DLC).
Functional Description
The Wireless Diagnostic Interface device package, which includes the unit,
user manual, and a CD with driver program and update agent, comes along
with the FCAR/FCAR Mini tool kit. Please refer to the FCAR User Manual
for additional information.
No.
①
Name
Power Indicator
Description
Lights up when powered (connected to the
car)
②
Diagnostic light
Lights up when connected to vehicle
③
Bluetooth indicator
Lights up when connected to tablet PC
④
USB indicator
Lights up when connected to tablet PC
⑤
DB15 Interface
Connect to the main testing line, connect to
the vehicle through the diagnostic connector
⑥
USB interface
(B shape)
Connect to tablet PC or upgrade VCI box
Table 1 – Status LEDs and Interface on the Front Panel
Vehicle Data Connector
The vehicle connector connects the device to the vehicle’s DLC via a standard
DB15 – Pin OBD II cable.
Status LEDs
There are 5 status LEDs on the front panel of the VCI device, which indicates
its working status as well as the hardware conditions, and are very useful for
troubleshooting the device’s communication or connection to the Vehicle,
display tablet and/or the PC. See Table 1 for detailed description of the status
LEDs.
USB Port
The USB port provides the easiest connection between the device and the
display tablet via a USB cable, and is used to control the device from the
software application running on the Auto Diagnostic System Display Tablet,as
F7S Auto Diagnostic System,F6S Auto Diagnostic System,F6 PLUS Auto
Diagnostic System.
Technical Specifications
Item
Description
Communications

BT
V4.0 + EDR
BT V.2.1

USB 2.0
Wireless Frequency
2.4 GHz
Input Voltage Range
12 VDC
Supply Current
300 mA @ 12 VDC
Operating Temperature
0°C to 50°C (ambient)
Storage Temperature
-20°C to 70°C (ambient)
Dimensions (L x W x H)
164 mm (6.46”) x 112 mm (4.41”) x 31.5 mm (1.24”)
Weight
0.30 kg (0.661 lb)
Capabilities
When used in conjunction with the display table, the Wireless Diagnostic
Interface device is able to perform the following functions:

Auto diagnostics to read and clear the error memory, to display system
parameters and the status of the ECU;

Activation, adjustments and configurations that are essential for ensuring
a complete repair;

Resetting the service lights or the airbag systems;

Configuration of the ECUs, keys and remote controls, etc.
Product Troubleshooting
This part describes problems that you may encounter while using the VCI
device.
Vehicle Linking Error
A communication error occurs if the interface device fails to communicate with
the vehicle’s control module when performing diagnostic procedures. You
need to do the following check-ups:
1.
Verify that the ignition is ON.
2.
Check if the interface device’s OBD II connector is securely connected to
the vehicle’s DLC.
3.
Turn the ignition off and wait for about 10 seconds. Turn the ignition back
to on and continue the operation.
Verify the control module is not defective.
If these issues have been addressed, verified, and you are still having trouble,
please contact technical supports for assistance. Refer to the FCAR User
Manual for additional information.
Firmware Update
FCAR periodically releases updates to the device’s drivers. Updates are
necessary to solve specific problems and to ensure the VCI device is working
properly with the OEM software. If you are experiencing any problems during
use, always make sure that you have the latest device software and drivers.
Update Online
This function allows you to update the software for the device through the
F c a r Display Tablet . Make sure the Display Tablet is connected to the
VCI device.
11
Compliance Information
FCC COMPLIANCE
FCC ID: 2AJDD-MAXIBTVCI
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in
a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures: ⅰ.
Reorient or relocate the receiving antenna. ⅱ . Increase the separation
between the equipment and receiver. ⅲ. Connect the equipment into an
12
outlet on a circuit different from that to which the receiver is connected. ⅳ.
Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated
with minimum distance 20cm between the radiator & your body.
RoHS COMPLIANCE
This device is declared to be in compliance with the European RoHS Directive
2011/65/EU.
CE COMPLIANCE
This product is declared to conform to the essential requirements of the
following Directives and carries the CE mark accordingly:
EMC Directive 2004/108/EC
R&TTE Directive 1999/5/EC
Low Voltage Directive 2006/95/EC
13
Warranty And Service
Limited One Year Warranty
FCAR warrants to its customers that this product will be free from all defects in
materials and workmanship for a period of one (1) year from the date of the
original purchase, subject to the following terms and conditions:
1)
2)
3)
4)
The sole responsibility of FCAR under the Warranty is limited to either the
repair or, at the option of FCAR, replacement of the device at no
charge with Proof of Purchase.
This warranty does not apply to damage due directly or indirectly, to
misuse, abuse, negligence or accidents, repairs or alterations outside
our Service Center or facilities, criminal activity, improper installation,
normal wear and tear, or to lack of maintenance.
FCAR shall not be liable for any incidental or consequential damages
arising from the use, misuse, or mounting of the device. Some states do
not allow limitations on how long an implied warranty lasts, so the above
limitations may not apply to you.
All information in this manual is based on the latest information available
at the time of publication and no warranty can be made for its accuracy
or completeness. FCAR reserves the right to make changes at any time
without notice.
Service Information
If you have any questions, please contact your local distributor or visit our
website at www.FCAR.com.
If it becomes necessary to return the tool for repair, contact your local
distributor for more information.
14

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Author                          : A12202
Create Date                     : 2016:08:16 16:06:54+08:00
Modify Date                     : 2016:08:18 17:46:26+08:00
Has XFA                         : No
Language                        : zh-CN
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Format                          : application/pdf
Creator                         : A12202
Creator Tool                    : Microsoft® Word 2010
Metadata Date                   : 2016:08:18 17:46:26+08:00
Producer                        : Microsoft® Word 2010
Document ID                     : uuid:9dbc2077-1a69-400b-bdb4-bba1ab943a76
Instance ID                     : uuid:57b703b6-0103-4ce4-b522-b62087298dfe
Page Count                      : 13

EXIF Metadata provided by EXIF.tools