FENDA TECHNOLOGY HX-P240 Jam Plus User Manual IB HX P240 2 22
SHENZHEN FENDA TECHNOLOGY CO., LTD. Jam Plus IB HX P240 2 22
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1908821 |
| Application ID | d2TuQcXeFPNRACSSfog2fg== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 159.87kB (1998418 bits) |
| Date Submitted | 2013-02-28 00:00:00 |
| Date Available | 2013-02-28 00:00:00 |
| Creation Date | 2013-02-22 14:56:44 |
| Producing Software | Adobe PDF library 10.01 |
| Document Lastmod | 2013-02-27 10:25:15 |
| Document Title | IB-HX-P240_2-22 |
| Document Creator | Adobe Illustrator CS6 (Macintosh) |
PLUS WIRELESS SPEAKER Instruction Manual and Warranty Information Por manual de instrucciones e Información de garantía en español visítenos en www.hmdxaudio.com Thank you for spreading the Jam and purchasing the HMDX Jam Plus Wireless Speaker. Be sure to check out the entire JAM product line on our website: www.hmdxaudio.com — Where there’s a Jam there’s a party! HX-P240 Package Contents User Manual Jam Plus Charging Cord Charging the Unit Approximately 3 hours required for full charge. Can be charged by using the USB to Micro USB cord (included) through computer or AC adapter with USB jack (not included). Note: Battery will last up to 4 hours when connected wirelessly. Controls 10 Power Button Speaker Mode Switch Charging Port Line-in Audio Jack Battery Status Indicator Volume Down Play/Pause Button Volume Up Bluetooth® Indicator Jam2 L– MO NO –R 5 6 7 Indicators Battery Indicator Status Bluetooth Indicator 10 8 9 Status Solid Red Charging Quickly Flash BLUE Pairing Mode Slow Blinking Red Low Battery Slowly Flash BLUE Paired RED Line-In Mode Note: When unit is fully charged Red light will be off. Pairing a Single Jam Plus Speaker (Mono) To listen to your music over Bluetooth wireless connection, you need to pair your device with Jam Plus: 1. Make sure your device has Bluetooth capability. 2. Press and hold power button for 5 seconds; indicator will begin to flash. 3. Follow the instructions of your device to pair the unit. 4. Pair your device with the unit by selecting JAM PLUS from your Bluetooth listings on your device or selecting YES. 5. Press play on your device and use controls on the unit to adjust desired volume. NOTE: • Once you have successfully paired your device, you may not need to repeat the above steps. Please ensure the AUX cable is unplugged and your device has been Bluetooth enabled. • When using only one Jam Plus, make sure that the switch is set to Mono. You will not be able to pair with the speaker if it is set to “L” or “R”. • When pairing with a computer, please consult your computer manufacturer for Bluetooth pairing instructions and/or the latest Bluetooth Drivers. • A pairing code is not required. Pairing 2 Jam Plus speakers together (Stereo) To pair 2 Jam Plus speakers together for stereo sound please follow the below steps: 1. Turn 1 speaker over and move the speaker mode switch to L. 2. Turn the other speaker over and move the speaker mode switch to R. 3. Press and hold power button for 5 seconds on one speaker. 4. Press and hold power button for 5 seconds on other speaker. 5. Speakers will begin to pair together automatically. 6. Paring process can take up to 30 seconds- once you hear the steel drum tone and the Jam2 indicator light begins to slowly flash, you may pair to your device. 7. Follow the instructions of your device to pair the unit. 8. Pair your device with the unit by selecting Jam2 from your Bluetooth listings on your device or selecting YES. NOTE: • If you do not see Jam2 as an option on your device - you may have only paired 1 speaker. Turn off both units and repeat steps 1-8. • You cannot pair more than one set of Jam Plus speakers together. • If you are using two Jam Plus speakers in Stereo (Jam2 Mode), in order to use them in Mono mode, turn off the unit and move the switch on the bottom to the center Mono position. • When 2 Jam Plus speakers are paired in Stereo (Jam2 Mode), and you turn off 1 speaker, the 2nd speaker will turn off automatically. • For balancing the volume level on the speakers, maximize volume on both units and control volume through device. Listening to your device through the Auxiliary Line-In Audio Jack 1. Connect Aux cable to the headphone or line-out jack of an audio device and plug the other end of the cable into the Line-In Audio Jack on the back of the unit. 2. Press and hold the power buttons to turn on the unit. 3. Press PLAY on the device and use controls on the unit to adjust desired volume. NOTE: Track forward/reverse and play/pause controls on Jam Plus will not work when using Line In Audio Jack NOTE: To reset the speaker or clear the pairing history, press the reset button, or with the power on, press the play/pause button and power button simultaneously for 5 seconds. Maintenance Use only a soft dry cloth to clean the enclosure of the unit. NEVER use liquids or abrasive cleaner to clean. FCC Disclaimer: Note: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules and Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user's authority to operate the equipment. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. One Year Limited Warranty: For detailed Warranty Instructions and Information visit: http://www.hmdxaudio.com/products/jam-wireless-portable-speaker.html To obtain warranty service on your HMDX product, contact a Consumer Relations Representative by telephone at 1-800-753-3000 or email cservice@hmdxaudio.com for assistance. Please make sure to have the model number of the product available. Representatives are available 8:30am - 7:00pm EST Monday-Friday. IMPORTANT SAFEGUARDS: When using an electrical product, basic precautions should always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING • WARNING: Do not place speakers too close to ears. May cause damage to ear drums, especially in young children. • Use this product only for its intended use as described in this manual. Do not use attachments not recommended by HMDX. • HMDX is not liable for any damage caused to Smartphones, iPod/MP3 player or any other device. • Do not place or store this product where it can fall or be dropped into a tub or sink. • Do not place or drop into water or any other liquid. • Not for use by children. THIS IS NOT A TOY. • Never operate this product if it has a damaged cord, plug, cable or housing. • Keep away from heated surfaces. • Only set on dry surfaces. Do not place on surface wet from water or cleaning solvents. Por manual de instrucciones e Información de garantía en español visítenos en www.hmdxaudio.com HMDX Jam and HMDX are trademarks of HMDX. ©2013 HMDX. All Rights Reserved. IB-HXP240
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Encryption : Standard V2.3 (128-bit) User Access : Print, Extract, Print high-res XMP Toolkit : 3.1-702 Format : application/pdf Title : IB-HX-P240_2-22 Metadata Date : 2013:02:27 10:25:15+08:00 Modify Date : 2013:02:27 10:25:15+08:00 Create Date : 2013:02:22 14:56:44-05:00 Creator Tool : Adobe Illustrator CS6 (Macintosh) Thumbnail Width : 232 Thumbnail Height : 256 Thumbnail Format : JPEG Thumbnail Image : (Binary data 22404 bytes, use -b option to extract) Instance ID : uuid:bea4e203-69fc-4827-8f7f-126d1fc13804 Document ID : xmp.did:F97F117407206811822AD0199BEBB85B Original Document ID : uuid:5D20892493BFDB11914A8590D31508C8 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:F87F117407206811822AD0199BEBB85B Derived From Document ID : xmp.did:F87F117407206811822AD0199BEBB85B Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8 Derived From Rendition Class : default History Action : converted, saved, converted, converted, saved, saved, saved, saved, saved, converted, saved, converted, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, converted, saved, converted, saved, converted, saved, converted, saved, saved, saved, saved, saved, saved, saved History Instance ID : xmp.iid:D27F11740720681191099C3B601C4548, xmp.iid:F97F1174072068118D4ED246B3ADB1C6, xmp.iid:FA7F1174072068118D4ED246B3ADB1C6, xmp.iid:EF7F117407206811A46CA4519D24356B, xmp.iid:F07F117407206811A46CA4519D24356B, xmp.iid:F77F117407206811BDDDFD38D0CF24DD, xmp.iid:F97F117407206811BDDDFD38D0CF24DD, xmp.iid:FA7F117407206811BDDDFD38D0CF24DD, xmp.iid:FB7F117407206811BDDDFD38D0CF24DD, xmp.iid:FC7F117407206811BDDDFD38D0CF24DD, xmp.iid:FD7F117407206811BDDDFD38D0CF24DD, xmp.iid:FE7F117407206811BDDDFD38D0CF24DD, xmp.iid:B233668C16206811BDDDFD38D0CF24DD, xmp.iid:B333668C16206811BDDDFD38D0CF24DD, xmp.iid:B433668C16206811BDDDFD38D0CF24DD, xmp.iid:F77F11740720681197C1BF14D1759E83, xmp.iid:F87F11740720681197C1BF14D1759E83, xmp.iid:F97F11740720681197C1BF14D1759E83, xmp.iid:FA7F117407206811B628E3BF27C8C41B, xmp.iid:FF7F117407206811B628E3BF27C8C41B, xmp.iid:07C3BD25102DDD1181B594070CEB88D9, xmp.iid:F87F1174072068119098B097FDA39BEF, xmp.iid:F77F117407206811BB1DBF8F242B6F84, xmp.iid:F97F117407206811ACAFB8DA80854E76, xmp.iid:0180117407206811834383CD3A8D2303, xmp.iid:F77F117407206811818C85DF6A1A75C3, xmp.iid:0280117407206811A8FAFD4845DCDC5F, xmp.iid:F97F117407206811822AD0199BEBB85B History When : 2008:04:17 14:19:15+05:30, 2008:05:15 16:23:06-07:00, 2008:05:15 17:10:45-07:00, 2008:05:15 22:53:33-07:00, 2008:05:15 23:07:07-07:00, 2008:05:16 10:35:43-07:00, 2008:05:16 10:40:59-07:00, 2008:05:16 11:26:55-07:00, 2008:05:16 11:29:01-07:00, 2008:05:16 11:29:20-07:00, 2008:05:16 11:30:54-07:00, 2008:05:16 11:31:22-07:00, 2008:05:16 12:23:46-07:00, 2008:05:16 13:27:54-07:00, 2008:05:16 13:46:13-07:00, 2008:05:16 15:47:57-07:00, 2008:05:16 15:51:06-07:00, 2008:05:16 15:52:22-07:00, 2008:05:22 13:28:01-07:00, 2008:05:22 16:23:53-07:00, 2008:05:28 16:45:26-07:00, 2008:06:02 13:25:25-07:00, 2008:06:09 14:58:36-07:00, 2008:06:11 14:31:27-07:00, 2008:06:11 22:37:35-07:00, 2008:06:27 14:40:42-07:00, 2012:03:27 14:19:55-04:00, 2013:02:22 14:56:37-05:00 History Software Agent : Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS6 (Macintosh) History Changed : /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, /, / History Params : from application/vnd.adobe.illustrator to application/vnd.adobe.illustrator Manifest Link Form : EmbedByReference, EmbedByReference Manifest Reference File Path : /Volumes/graphics/GRAPHICS DEPARTMENT/LESLIE/CURRENT/IBs/HX-P430/reference/GettyImages_155076109.jpg, /Volumes/graphics/GRAPHICS DEPARTMENT/LESLIE/CURRENT/IBs/HX-P430/reference/GettyImages_155076109.jpg Startup Profile : Print Has Visible Overprint : True Has Visible Transparency : True N Pages : 1 Max Page Size W : 4.069444 Max Page Size H : 10.944166 Max Page Size Unit : Inches Font Name : AvantGarde-Book, MyriadPro-Cond, MyriadPro-BoldCond, TradeGothic-BoldCondTwenty, AvantGarde-Demi, TradeGothic-BoldOblique, AvantGarde-Bold, ITCAvantGardeStd-Demi Font Family : ITC Avant Garde Gothic, MyriadPro Cond, MyriadPro BoldCond, TradeGothic BoldCondTwenty, AvantGarde Demi, TradeGothic BoldOblique, AvantGarde Bold, ITC Avant Garde Gothic Std Font Face : Book, Cond, BoldCond, BoldCondTwenty, Demi, BoldOblique, Bold, Demi Font Type : Type 1, Open Type, Open Type, Type 1, Unknown, Type 1, Type 1, Open Type Font Version : 001.002, Version 2.102;PS 2.000;hotconv 1.0.67;makeotf.lib2.5.33168, Version 2.102;PS 2.000;hotconv 1.0.67;makeotf.lib2.5.33168, 001.001, Version 2.102;PS 2.000;hotconv 1.0.67;makeotf.lib2.5.33168, 001.001, 001.000, Version 1.000;PS 001.000;hotconv 1.0.38 Font Composite : False, False, False, False, False, False, False, False Font File Name : AvantGarBoo; Avant Garde.suit, MyriadPro-Cond.otf, MyriadPro-BoldCond.otf, TradeGotBolConTwe; TradeGothic-BoldCondTwenty, MyriadPro-Regular.otf, TradeGotBolObl; TradeGothic-BoldOblique, AvantGarBol; AvantGarde-Bold, ITCAvantGardeStd-Demi.otf Plate Names : Cyan, Magenta, Yellow, Black, PANTONE 3005 C, PANTONE 2597 C Swatch Groups Colorants Tint : 100.000000 Swatch Groups Colorants L : 46.666698 Swatch Groups Colorants A : 74 Swatch Groups Colorants B : 40 Swatch Groups Group Name : Brights Swatch Groups Group Type : 1 Swatch Groups Colorants Swatch Name: C=0 M=100 Y=100 K=0 Swatch Groups Colorants Mode : CMYK Swatch Groups Colorants Type : PROCESS Swatch Groups Colorants Cyan : 0.000000 Swatch Groups Colorants Magenta : 100.000000 Swatch Groups Colorants Yellow : 100.000000 Swatch Groups Colorants Black : 0.000000 Producer : Adobe PDF library 10.01 Slug Font Sense 12 Checksum : 960606385 Slug Version : 001.001 Slug Family : TradeGothic Slug Outline File Size : 39267 Slug Kerning Checksum : 52211 Slug Foundry : Adobe Systems Slug Font Kind : PostScript Slug Checksum : 960606385 Slug Post Script Name : TradeGothic-BoldOblique Page Count : 2 Container Version : 11 Creator Version : 16 Creator : Adobe Illustrator(R) 16.0 For : Cynthia Pohlod, Bounding Box : 1206 231 1923 1026 Image Height : 795 Image Width : 717 Image Size : 717x795 Megapixels : 0.570EXIF Metadata provided by EXIF.tools