FENDA TECHNOLOGY NSCSPBTWP1 Portable Bluetooth Stereo Speaker User Manual NS CSPBTWP1 17 0053 QSG V1 EN ai

SHENZHEN FENDA TECHNOLOGY CO., LTD. Portable Bluetooth Stereo Speaker NS CSPBTWP1 17 0053 QSG V1 EN ai

User Manual

Download: FENDA TECHNOLOGY NSCSPBTWP1 Portable Bluetooth Stereo Speaker User Manual NS CSPBTWP1 17 0053 QSG V1 EN ai
Mirror Download [FCC.gov]FENDA TECHNOLOGY NSCSPBTWP1 Portable Bluetooth Stereo Speaker User Manual NS CSPBTWP1 17 0053 QSG V1 EN ai
Document ID3422099
Application IDfrszVt3xtf6pREK1J+9CpA==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize15.37kB (192090 bits)
Date Submitted2017-06-12 00:00:00
Date Available2017-09-12 00:00:00
Creation Date2017-03-08 10:12:20
Producing SoftwareAcrobat Distiller 10.1.1 (Windows)
Document Lastmod2017-03-08 11:18:31
Document TitleNS-CSPBTWP1_17-0053_QSG_V1_EN.ai
Document CreatorPScript5.dll Version 5.2.2
Document Author: gippe

Flat size (W×H): 317.5 × 241.3 mm.
Final folded size: 105.83 × 241.3 mm.
IMPORTANT SAFETY INSTRUCTIONS
FEATURES
•
•
•
•
QUICK SETUP GUIDE
Portable
Bluetooth
Stereo
Speaker
NS-CSPBTWP1
10
11
12
13
PACKAGE CONTENTS
• Speaker
• USB cable
• Quick Setup Guide
14
15
v1
R3
Before using your new product, please read these instructions to prevent any damage.
16
17
Read these instructions. All the safety and operating instructions should be read
before this product is operated.
Keep these instructions. The safety and operating instructions should be retained
for future reference.
Heed all warnings. All warnings on the appliance and in the operating instructions
should be adhered to.
Follow all instructions. All operating and use instructions should be followed.
Clean only with a dry cloth.
Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or grounding plug. A polarized
plug has two blades with one wider than the other. A grounding plug has two
blades and a third grounding prong. The wide blade or the third prong is provided
for your safety. If the provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched particularly at the plugs,
convenience receptacles, and at the point where they exit from the apparatus.
Only use attachments/accessories specified by the manufacturer.
Unplug the apparatus during lightning storms or when unused for long periods of
time.
Refer all servicing to qualified personnel. Servicing is required when the apparatus
has been damaged in any way, such as the power supply cord or plug is damaged,
liquid has been spilled or objects have fallen into the apparatus, the apparatus has
been exposed to rain or moisture, does not operate normally, or has been dropped.
Do not install this equipment in a confined or buildt-in space such as a book case or
similar unit. It shall remain in a well ventilated space. The ventilation should not be
impeded by covering the ventilation openings with items such as newspaper,
table-cloths, curtains, etc.
WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus
to rain or moisture. The apparatus shall not be exposed to dripping or splashing and
objects filled with liquids, such as vases, shall not be placed on the apparatus.
WARNING: The power adapter is used as the disconnect device. It shall remain
readily operable.
The equipment shall be used at a maximum of 95° F (35° C) ambient temperature.
WARNING: Please refer to the information on the exterior bottom enclosure for
electrical and safety information before installing or operating the apparatus.
Wirelessly stream from any Bluetooth device
Rechargeable battery with 20-hour playback
14,000 mAH battery with USB port to charge your devices
Waterproof (IPX7)
Control panel functions:
POWER
VOL-/VOL+
BASS
PLAY/PAUSE/CALL
Reset
AUX IN
Charge-enable
button
USB Charge Out
Power
FEATURE
DESCRIPTION
Power
Press to turn the speaker on and off.
BASS
Press to turn the bass on and off.
PLAY/PAUSE/CALL
• Press to mute/unmute in AUX mode.
• Press to play/pause in BT mode.
• Press to answer an incoming call in BT mode. Press this button again to
hang up the call.
• Press and hold for three seconds to reject the call in BT mode.
• Press and hold for three seconds to switch between phone and
speakerphone when in call.
• Press and hold for three seconds to enter pairing mode while in BT mode.
VOL+/-
Press to increase or decrease the volume.
Charge-enable
button
Press to disable/enable charge output on the USB port when in standby
mode.
Reset
Press to complete a hardware reset.
USING YOUR BLUETOOTH SPEAKER
SPECIFICATIONS
LEGAL NOTICES
1 Press the POWER button to turn on the speaker. When
the speaker is on, the blue LED lights on the left of the
power button.
2 Press the VOL-/VOL+ button to adjust the volume. The
blue LED flashes once with each press. Hold the
VOL-/VOL+ button. The blue LED flashes rapidly.
3 Press the PLAY button to play or pause the speaker in
Bluetooth mode.
• Power output: 30W
• USB cable: 19.7 in. (0.5 m)
Warning: Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.
The device has been evaluated to meet general RF exposure requirement. The device can be
used in portable exposure condition without restriction.
Note: In standby mode, press the CHARGE button to enable
USB charging.
TROUBLESHOOTING
PROBLEM
SOLUTION
No power
• Make sure that your speaker is plugged in
and turned on.
No sound or low
volume
• Make sure that your Bluetooth device is
turned on, Bluetooth is turned on, and
NS-CSPBTWP1 is selected.
• Turn up the volume on your speaker.
• Turn up the volume on your Bluetooth
device.
• Make sure that your Bluetooth device is
not muted.
• Make sure that your speaker is not paired
to another Bluetooth device.
• Make sure that your Bluetooth device is
not paired to another Bluetooth device.
Cannot establish
Bluetooth
connection
• Shorten the distance between your
speaker and your Bluetooth device.
• Turn your devices off, then on. Re-pair
your speaker and your Bluetooth device.
• Make sure that your speaker is not paired
to another Bluetooth device.
• Make sure that your speaker and
Bluetooth device are both in pairing
mode.
• Make sure that your Bluetooth device
supports Bluetooth v4.0 and below.
• Make sure that your Bluetooth device is
not connected to any other device.
• Make sure that you have selected
NS-CSPBTWP1 on your Bluetooth device.
My Bluetooth
device keeps
unpairing
• Shorten the distance between your
speaker and your Bluetooth device.
• If the battery on your Bluetooth device is
low, recharge the battery.
“NS-CSPBTWP1”
does not appear
on my Bluetooth
device
• Shorten the distance between your
speaker and your Bluetooth device.
• Put your speaker into pairing mode, then
refresh your list of Bluetooth devices. For
more information, see the documentation
that came with your Bluetooth device.
Bluetooth mode
1 Turn on the speaker. Bluetooth pairing is automatically
turned on and the blue LED flashes.
2 On your Bluetooth device, click “NS-CSPBTWP1” to pair
with the speaker.
3 After pairing successfully, the LED flashes slowly.
4 If there is an incoming call, the LED flashes quickly.
Note: After switching to Bluetooth mode, the speaker
automatically searches for a Bluetooth device and reconnects
if the devices have paired before. If it doesn’t find any paired
device, it will enter pairing mode to search for new devices.
AUX mode
• The speaker automatically switches to AUX mode when
you plug in an AUX cable. Bluetooth mode is disabled.
Note: Press the PLAY button to mute the speaker when
playing music. Press again to unmute.
STATE
LED
BT pairing mode
Blue LED fast flash
BT connect mode
Blue LED slow flash
BT playing mode
Blue LED fade in/out
Incoming call
Blue LED flash
Bass boost on
Blue LED flash once
Bass boost off
Blue LED flash twice
AUX mute
Blue LED slow flash
AUX play
Blue LED fade in/out
Charging
Red LED solid
Full charge
Red LED off
Industry Canada Compliance
IC Statement
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may
cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables
aux appareils radio exempts de licence. L'exploitation est autorisée aux deux
conditions suivantes :
(1) l'appareil nedoit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d'en compromettre le fonctionnement.
ONE-YEAR LIMITED WARRANTY
Visit www.insigniaproducts.com for details.
CONTACT INSIGNIA:
1-877-467-4289 (U.S. and Canada)
01-800-926-3000 (Mexico)
www.insigniaproducts.com
INSIGNIA is a trademark of Best Buy and its affiliated companies
Distributed by Best Buy Purchasing, LLC
7601 Penn Ave South, Richfield, MN 55423 U.S.A.
©2017 Best Buy. All rights reserved.
Made in China
V1 ENGLISH 17-0053

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Author                          : gippe
Create Date                     : 2017:03:08 10:12:20-07:00
Modify Date                     : 2017:03:08 11:18:31-06:00
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2017:03:08 11:18:31-06:00
Producer                        : Acrobat Distiller 10.1.1 (Windows)
Format                          : application/pdf
Title                           : NS-CSPBTWP1_17-0053_QSG_V1_EN.ai
Creator                         : gippe
Document ID                     : uuid:6fc6380d-7d31-46af-9583-50088aed0bd2
Instance ID                     : uuid:3eabb04e-65e5-458b-b54e-d7a9581e7c85
Page Count                      : 2
EXIF Metadata provided by EXIF.tools
FCC ID Filing: HBONSCSPBTWP1

Navigation menu