FKA Distributing HXP110 Amp User Manual
HoMedics, Inc. Amp
User Manual
HX‐P110 AM MP HMDX Amp USA cservice@hmdxaudio.com 1.800.573.3000 8:30am‐7:00pm EST M‐F You’ve got questions? We’ve got answers. Contact a Customer Relations representative by phone, or email to help answer any questions. Please be sure to have the model number of your product available. (Hint: It’s HX‐P110) www.hmdxaudio.com/customer‐support/product‐registration h // http://www.hmdxaudio.ca/hmdx‐support‐ca h d di /h d CANADA cservice@homedicsgroup ca cservice@homedicsgroup.ca 1.888.225.7378 8:30am‐5:00pm EST M‐F Charging the speaker is so easy you’ve probably figured it out by now, but just in case, you’ve got two options: you can charge it using your computer or a wall outlet. The Amp speaker needs about 2 hours for up to 4 hours of play time. 1. The cord that came with the speaker – the one with the USB on one end and the Micro USB on the other – will work with your computer. 2. If you want to use the wall outlet, you’ll need to pick up a power cord with a Micro USB the next time you’re at the store, or use any USB AC adapter, including the one for your cell. 2h AC adaptor not included 1. 2. 3. 4. 5. Press for volume up/hold for 2s to skip track. Play/pause (see Bluetooth section to turn on/connect) Turn the Music down. (Press and hold d for 2s to move to the previous track). Microphone Micro USB charging port What it looks like What it Means Flashing Blue and Red Pairing Mode Connected Slow Flashing Blue Slow Flashing Red Low Battery Red Charging No LED Fully charged BLUETOOTH® Like any amazing couple this one starts with a connection – one between you ur device and the speaker’s Bluetooth. Here’s how it works: 1. Make sure the smartphone, tablet or computer you’re using with the sp peaker has Bluetooth. 2. Turn on the speaker by pressing and holding the POWER button for 2 seeconds and look for the little blinking light next to the charging port. 3. Do whatever your device needs you to do on its end to turn on Bluetootth. 4. Look for Amp in your device’s Bluetooth list or click YES. 5. Now hit PLAY on your speaker and crank it up ‐ or down if you’re lame. The device and the Bluetooth will find each other every time just as long as the speaker is set to Bluetooth and your device’s Bluetooth is, you know, on. If you’re connecting to a computer, you may have some extra steps on that end. You’ll have to get that information from the computer company. 2s Amp Depending on your device you may be prompted to enter a pairing code. If prompted, enter “0000” as the code. Device will automatically enter pairing mode. Note: If you turn on your Amp speaker but haven’t started the party yet, it will automatically power off after 2 minutes of unpaired inactivity. LOOK MA, NO HANDS! When friends call asking to join the party – and you know they will – answer the phone without disconnecting from you Amp. Yes, that’s right. Your speaker has hands–free calling too. How amazing is that? Here’s how it works: 1 Make sure your phone and speaker is connected through 1. Bluetooth. 2. Answering and ending a call works the same way: simply click the PLAY/PAUSE button on your Amp. 3. If you’d rather not talk, hold down the PLAY/PAUSE button on your speaker fo or 2 seconds to ignore the call. TH HE COOLEST PART: The Amp speaker knows when a call is coming in and paauses the music before ringing. When you hang up, the music starts where it lefft off – and so does the party. party If it’s it s you making the call call, just start dialing fro om your phone, and the Amp automatically does its hands‐free calling thing. Isn n’t it refreshing to know your speaker totally gets you? A soft dry towel is all you need to clean off your speaker. k U Using i water, harsh h h cleaners, or anything else only starts messing with the mechanics inside. FCC Warning: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: Thi equipment This has b been tested d and d ffound d to comply l with i h the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and reception, on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.. This transmitter must not be co‐located or operating in conjunction with any other antenna or transmitter. ©2018 HMDX. All Rights Reserved. IB‐HXP110 ISEDC Warning: This device complies with Innovation, Science, and Economic Development Canad licence‐exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d' Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil nedoit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. ISEDC Radiation Exposure Statement: The device is compliance with RF exposure guidelines, users can obtain Canadian information on RF exposure and compliance. Le présent appareil est conforme Après examen de ce matériel aux conformité ou aux limites d’intensité de champ RF,les utilisateurs peuvent sur l’exposition aux radiofréquences et la conformité and compliance d’acquérirles informations correspondantes.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Author : SZ070 Create Date : 2018:05:02 15:44:57+08:00 Modify Date : 2018:05:07 14:58:50-07:00 XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Producer : Acrobat Distiller 9.0.0 (Windows) Creator Tool : PScript5.dll Version 5.2.2 Metadata Date : 2018:05:07 14:58:50-07:00 Format : application/pdf Title : Microsoft PowerPoint - Draft HX-P110 Amp-4.26 OK.pptx Creator : SZ070 Document ID : uuid:b68a6230-78d2-4af0-b83d-f44a09ac2c76 Instance ID : uuid:13bd93da-3cc2-446a-a633-30878667295d Page Count : 3EXIF Metadata provided by EXIF.tools