FKA Distributing WM1801 Bluetooth Speaker User Manual
HoMedics, Inc. Bluetooth Speaker
User manual
Use Manual
ONA 18AA019、ONA 18AA020、ONA 18AA021
Mic Button “ +” Play/Pause Blue/Red Light Button “—”
AUX IN port USB Charging port Indicator light
Use Manual
Button function：
Pause/Play:
Long press will power on and power off /reject the call/exchange between #1 call and
#2 call/ reject the second call.
Short press will play/Pause and to answer the incoming call/Support the third parts
calling
“+”button : volume +, BT volume that sync with IOS. Long press to go to the next track.
“-” button： Volume-, BT volume that sync with IOS. Long press to got to the previous track.
s
Multi-Function Buttons：
Press “+” and “- ” at the same time to disconnect the BT
LED indicator ：
1：When BT don’t connect, Light Flash blue then red when pairing.
When BT connected, Light Blue LED Flash 5seconds/time
2：When charging the light will be a solid red and once done charging the light will turn off
3: When line-in blue light will slow flash 3seconds/time
4: Charging will use a charging with DC5V-300mA MicroUSB port to charge
BT pairing name ：
Black one ：Onn SPKR A019
Pink one ： Onn SPKR A020
Blue one： Onn SPKR A021
If the Bluetooth does not connect, it will shutdown after 2 minutes. If connected to Bluetooth
successfully 15 minutes non-operation, it will automatic shutdown.
Static current: Less than 15uA
Bluetooth transmission distance: not less than 10m
Use Manual
FCC Caution:
Any Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
—Consult the dealer or an experienced radio/TV technician for help.
Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment .