FKA Distributing WM1802 Bluetooth Speaker User Manual 4 user mannul OK
HoMedics, Inc. Bluetooth Speaker 4 user mannul OK
User manual
[] BWA18AA010 Operation Description Microphone “+”Button Play/Pause Button Blue and red light “—"Button [] Line in USB Charging port(500mA) Buttons function: Play/pause button : Long press is power on/power off/reject call/switch call 1 and call 2 /reject second call. Default is bluetooth mode after power on. Short press is play/pause and hang up,support three‐way calling. "+"button:volume plus,bluetooth volume synchronize with IOS.Long press is next track. "—"button,bluetooth volume synchronize with IOS.Long press is previous Buttons associative functions: Long press "+"and"—"at same time is disconnect bluetooth. LED indicator: 1.Red and blue light flash fast when disconnect bluetooth, 2.When charging condition,red light keeps on;fully charged,red light goes off. 3.Blue light flash slow when line in condition.(Blue light flash every 3 seconds ) [] Prompt tone:total has seven prompt tones: BATTERY HIGH prompt tone play one time when battery voltage is 4.1V; BATTERY MEDIUM prompt tone play one time when battery voltage is 3.8V; BATTERY LOW prompt tone start play one time every 10 minutes when battery voltage is 3.6V,when play 4 times and after 5 minutes will power off automatically Charge: use DC 5V/500mA USB port charger to charge(charging current is 500mA when 3.7V ) Bluetooth pairing name: Canada version WM1802BL‐CA pairing name is BW SoundPebble2 BL WM1802BK‐CA pairing name is BW SoundPebble2 BK US Version WM1802 pairing name is Blackweb SPRK A010 When disconnect bluetooth , power off automatically after 2 minutes. When connected bluetooth,power off automatically after 15 minutes no‐operation. Quiescent current:less than 20uA Bluetooth transmission range:exceeded 10 meters. FCC Caution: Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by [] turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. ISEDC WARNING This device complies with Innovation, Science, and Economic Development Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d' Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil nedoit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. The device is compliance with RF exposure guidelines, users can obtain Canadian information on RF exposure and compliance. Le présent appareil est conforme Après examen de ce matériel aux conformité ou aux limites d’intensité de champ RF, les utilisateurs peuvent sur l’exposition aux radiofréquences et la conformité and compliance d’acquérir les informations correspondantes.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Author : SZ162 Create Date : 2018:01:31 16:49:29+08:00 Modify Date : 2018:02:06 14:24:36-08:00 XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Producer : Acrobat Distiller 9.0.0 (Windows) Creator Tool : PScript5.dll Version 5.2.2 Metadata Date : 2018:02:06 14:24:36-08:00 Format : application/pdf Title : Microsoft Word - 4. user mannul-OK Creator : SZ162 Document ID : uuid:dd314fc3-f442-4d95-befa-81e1ea541a55 Instance ID : uuid:ce078aac-8f97-49c3-a2cf-90fd49f67d9a Page Count : 4EXIF Metadata provided by EXIF.tools