FLYSKY RC MODEL TECHNOLOGY FLYSKYGT2 2 CH Gun Radio User Manual manual part 3

FLYSKY RC MODEL TECHNOLOGY CO., LTD 2 CH Gun Radio manual part 3

Contents

manual part 3

10
10.02 Power on:
10.03 Shut down:
FG
11
12
12.01方向舵控制:
13
12.02油门控制:
失控保护功能是对模型车或船进行失控保护，避免因失控造成损失。主要是对油门通道进行控制，当接
收机接收不到控制信号时，接收机的油门通道将自运行到当初设定的值，以免误动作。
Failsafe aims to prevent out-of-control driving of RC Car or RC Boat.If the Rec eiver is not able to receive
any signal, from the control to Throttle, the parameter of Throttle on Rec eiver will turn back to its original
setting.
14
15
16
FS-GT2
Http://www.flysky-cn.com
Copy right 2008@flysky co.,ltd
Digital propotional radio control sytem
GT2
INSTRUCTION MANUAL
用户手册
17
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
—Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
This device complies with FCC radiation exposure limits set forth for an uncontrolled
environment and it also complies with Part 15 of the FCC RF Rules. This transmitter must not
be co-located or operating in conjunction with any other antenna or transmitter.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.
Caution!
The manufacturer is not responsible for any radio or TV interference caused by unauthorized
modifications to this equipment. Such modifications could void the user authority to operate
the equipment.

Navigation menu