FM Jam TX3-18 Low Power FM Transmitter User Manual FM SET draft

Download:
Mirror Download [FCC.gov]
Document ID	932464
Application ID	tw4doz+yQycTDV1J8vg1Fg==
Document Description	user manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	0.87kB (10826 bits)
Date Submitted	2008-04-23 00:00:00
Date Available	2008-04-24 00:00:00
Creation Date	2008-04-16 14:50:59
Producing Software	Acrobat PDFWriter 5.0 for Windows NT
Document Lastmod	0000-00-00 00:00:00
Document Title	FM SET draft user manual.doc
Document Creator	FM SET draft user manual.doc - Microsoft Word
Document Author:	alaudani

FM Jam Inc
2157 Newcastle Ave. Cardiff, Ca 92007
760-943-7829
Using the TX3 with an FM Receiver
One of the most unique features of the TX3 is its ability to transmit your guitar signal via wireless signal
sent to any FM receiver, such as your car or home stereo system, or a boom box. To transmit from the
TX3 to an FM receiver, you'll need to match the frequency of the FM receiver with the frequency on
which the TX3 is transmitting. The TX3 has a transmission range of approximately 30 feet (10 meters)
but will work best within 5 to 15 feet of your FM receiver. Also, set your receiver's volume to zero, then
turn up after you've powered up both the receiver and the TX3.
To determine which frequency the TX3 is transmitting on, click the left "Wing" button once, until the
"FM-SET" LED lights up. If the main LED display reads 8.9, the TX3 is transmitting on FM frequency
88.9. Set your FM receiver to this frequency and you'll hear your guitar. You can change this frequency
if you desire. For more information on the FM transmission frequency, see Section Three – Edit Mode,
and the passage titled "FM-SET."
*******************************
THE FOLLOWING IS THE SECTION OF SPECIFIC INSTRUCTIONS FOR
DETERMINING OR CHANGING THE FM TRANSMISSION FREQUENCY FOR
THE FM-JAM TX3:
FM-SET..................17
Playing your guitar on the radio is what it's all about, and the TX3 is all you need! The FM transmitter
built into the TX3 allows you to play your guitar over any FM radio receiver: yo ur boom box, your car
stereo, or your home entertainment center. You'll be amazed at the quality of sound you'll hear, and
you'll love the freedom of playing your guitar through your car stereo on your lunch break, or while
watching the sun set down at the beach!
To transmit your guitar signal to your FM receiver, you'll first need to match the frequency of the FM
receiver with the frequency being transmitted by the TX3. To find which frequency your TX3 is
transmitting on, press the left "wing" button once, or until the small LED lights up near the "FM-SET"
tab.
If the main LED display reads "8.9" your TX3 is transmitting on FM frequency 88.9. Set your FM
receiver to this frequency and you'll hear your guitar.
If you encounter interference from a powerful radio station, or if the guitar signal you hear from your
FM receiver's speakers isn't simply awesome, you can change the transmission frequency by simply
pressing the down "bean" button. Pressing this button will allow you to scroll down through several
other optional transmission frequencies.
The TX3 can transmit on any of the following frequencies: 88.1, 88.3, 88.5, 88.7, and 88.9.
You can scroll through these frequencies using the up and down bean buttons, then set your FM receiver
accordingly.
The TX3 has a transmission range of approximately 50 feet. Of course you'll probably get the best sound
when positioned closer to your FM receiver.
INFORMATION TO USER
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) This device must accept any interference received, including interference
that may cause undesired operation.
This equipment has been tested and found to comply with the limits for Class B
Digital Device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures.
•
•
•
•
Reorient or relocate the receiving antenna
Increase the separation between the equipment and receiver
Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected
Consult the dealer or an experienced radio/TV technician for help
Any changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
------------

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Page Count                      : 2
Creator                         : FM SET draft user manual.doc - Microsoft Word
Create Date                     : 2008:04:16 14:50:59
Title                           : FM SET draft user manual.doc
Author                          : alaudani
Producer                        : Acrobat PDFWriter 5.0 for Windows NT

EXIF Metadata provided by EXIF.tools