FOXCONN ICG100NAR-2 4GR User Manual QuickStart Guide
Foxconn International Inc 4GR QuickStart Guide
FOXCONN >
User Manual
4GR QUICKSTART GUIDE YOUR 4GR OUT OF THE BOX 1. Screw the four antennas onto the threaded ports extending from the 4GR. NOTE: The broad antennas should be placed at the back of the 4GR. 2. 3. Wait a few minutes while the 4GR locates a cellular signal. ËŁ [product photos/diagrams] 4GR LIGHT GUIDE No lights: 4GR does not have power. Single flashing green light: 4GR is powering on. Changing flashing green lights: As the 4GR searches for a signal, the lights will cycle back and forth (1,2,3,4,5; 5,4,3,2,1). Solid green light: Indicates level of cellular signal. 1 light is a poor signal, 5 lights is a very strong signal. All flashing red lights: 4GR cannot find a cellular signal. CONFIGURE YOUR 4GR 1. Using a computer or mobile device, connect to the 4GRâs Wi-Fi network. Use the name (SSID) and password printed on the label on the bottom of the 4GR. 2. Open an internet browswer and go to the address https://192.168.10.1 to access your 4GR Configuration Page. NOTE: If you receive a security warning about the websiteâs security or certificate, dismiss it. 3. You will be prompted to login. Use the Admin. Password from the 4GR label. 4. You are now able to configure your 4GR! 5. To change your SSID and/or create a new password, select Network Configuration from the drop-down menu. NOTE: If you change this information, it will replace the information on the label. Write it down and store it in a secure location. 6. For more information about configuring your 4GR, see the complete User Guide at www.intwineconnect.com CERTIFICATIONS, LICENSES, AND WARNINGS CAUTION: There is a risk of explosion if this deviceâs battery is replaced with an incorrect battery type. Dispose of all used batteries according to applicable instructions and regulations. COMPLIANCE: This device complies with Part 15 of FCC rules. Operation is subject to the following conditions: 1. this device may not cause harmful interference, AND 2. this device must accept any interference received, including interference that may cause undesired operation. FOR FCC 15B DEVICES: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interferences will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer of an experience radio/TV technician for help. FCC PART 15.21 INFORMATION FOR USER: You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. CERTIFICATIONS, LICENSES, AND WARNINGS FOR MOBILE DEVICES WITHOUT CO-LOCATION CONDITION (the transmitting antenna is installed or located more than 20cm away from the body of user and near by person): FCC RF Radiation Exposure Statement: 1. This Transmitter must not be located or operating in conjunction with any other antenna or transmitter. 2. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. FOR MOBILE DEVICES WITH CO-LOCATION CONDITION (the transmitting antenna is installed or located more than 20cm away from the body of user and near by person): FCC RF Exposure Statement: 1. This Transmitter has been demonstrated co-location compliance requirements with (Bluetooth model#). This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 2. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20c,m between the radiator and your body. For a complete list of warnings, warranties, and other useful information about your 4GR, please visit www.intwineconnect.com. Copyright Š 2015, Intwine Connect, LLC. 8401 Chagrin Rd. Suite 10B Chagrin Falls, OH 44023 (330) 405-8698 www.intwineconnect.com
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes XMP Toolkit : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39 Format : application/pdf Title : QuickStart Guide Creator : user Creator Tool : Adobe Illustrator CS6 (Windows) Create Date : 2017:05:24 17:36:46+08:00 Modify Date : 2017:05:24 17:36:46+08:00 Metadata Date : 2017:05:24 17:35:15+08:00 Thumbnail Width : 256 Thumbnail Height : 132 Thumbnail Format : JPEG Thumbnail Image : (Binary data 13067 bytes, use -b option to extract) Rendition Class : proof:pdf Original Document ID : uuid:65E6390686CF11DBA6E2D887CEACB407 Document ID : xmp.did:F97D750E124AE5118B878C2FA2ABD9F3 Instance ID : uuid:1aa86f76-5d21-4120-8866-c2642bcea9ea Derived From Instance ID : uuid:9a190051-664b-492b-87a9-123ec8713640 Derived From Document ID : xmp.did:76D734C4D849E5118C4FB2B42D70BBAF Derived From Original Document ID: uuid:65E6390686CF11DBA6E2D887CEACB407 Derived From Rendition Class : proof:pdf History Action : saved, saved History Instance ID : xmp.iid:76D734C4D849E5118C4FB2B42D70BBAF, xmp.iid:F97D750E124AE5118B878C2FA2ABD9F3 History When : 2015:08:23 16:51:45-04:00, 2015:08:23 23:41:51-04:00 History Software Agent : Adobe Illustrator CS6 (Windows), Adobe Illustrator CS6 (Windows) History Changed : /, / Manifest Link Form : EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference Manifest Reference File Path : C:\Users\Andrea\Desktop\Intwine\IC Documentation\Logos\my logo ball.ai, C:\Users\Andrea\Desktop\Intwine\IC Documentation\Logos\my logo ball.ai, C:\Users\Andrea\Desktop\Intwine\IC Documentation\Logos\my logo ball.ai, C:\Users\Andrea\Desktop\Intwine\IC Documentation\Logos\my logo ball.ai, C:\Users\Andrea\Desktop\Intwine\IC Documentation\Logos\my logo ball.ai, C:\Users\Andrea\Desktop\Intwine\IC Documentation\Logos\my logo ball.ai, C:\Users\Andrea\Desktop\Intwine\IC Documentation\Logos\my logo ball.ai, C:\Users\Andrea\Desktop\Intwine\IC Documentation\Logos\my logo ball.ai Startup Profile : Web N Pages : 1 Has Visible Transparency : False Has Visible Overprint : False Max Page Size W : 8.500000 Max Page Size H : 6.500000 Max Page Size Unit : Inches Font Name : Ebrima, Ebrima-Bold, Raleway-Bold Font Family : Ebrima, Ebrima, Raleway Font Face : Regular, Bold, Bold Font Type : Open Type, Open Type, TrueType Font Version : Version 5.00, Version 5.00, Version 2.001; ttfautohint (v0.8) -G 200 -r 50 Font Composite : False, False, False Font File Name : ebrima.ttf, ebrimabd.ttf, Raleway-Bold.ttf Plate Names : Cyan, Magenta, Yellow, Black Swatch Groups Group Name : Web Color Group Swatch Groups Group Type : 1 Swatch Groups Colorants Swatch Name: R=189 G=204 B=212 Swatch Groups Colorants Mode : RGB Swatch Groups Colorants Type : PROCESS Swatch Groups Colorants Red : 189 Swatch Groups Colorants Green : 204 Swatch Groups Colorants Blue : 212 Producer : Acrobat Distiller 8.0.0 (Windows) Page Count : 6 Author : userEXIF Metadata provided by EXIF.tools