FUJIAN NAN AN BAOFENG ELECTRONICS BF-3R Two Way Radio User Manual User Manaul

Download:
Mirror Download [FCC.gov]
Document ID	1505073
Application ID	sVUhYHIYRu7LTBufA0lEVA==
Document Description	User Manual Part 2
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	211.17kB (2639618 bits)
Date Submitted	2011-07-20 00:00:00
Date Available	2011-07-20 00:00:00
Creation Date	2011-07-13 14:21:05
Producing Software	Acrobat Distiller 7.0 (Windows)
Document Lastmod	2011-07-13 14:55:37
Document Title	User Manaul.pdf
Document Creator	PScript5.dll Version 5.2
Document Author:	Administrator

Press [ MENU/LOCK] . tum clockwise or
counterclockwise
{DlALl .coms lo MENU [13] WW
Press [MENU/LOCK] , turn clockwise or
counterclockwise
{ DIAL 1 .come to MENU[14] SAVE.
Press [MENU/LOCK] , lurn clockwise or
counterclockwise
[DIAL] ,come to MENU [15] TOT.
Press [MENU/LOCK] , turn clockwise or
counterclockwise
K DIAL 1 ,eoms to MENU[16] SCANM
‘“ L
-.| a
Nl
Press [MENU/LOCK] . turn clockwise or m:
counterclockwise ELA M
[DIAL] ,coms lo MENU [17] RELAYM
Press [MENU/LOCK] , turn clockwise or
counterclockwise
{ DIAL] . come to MENU [IS] BCLO
0 Press the key ( UV/MODE I confirm lne sening, and Exmne lunctions
semng
OBENEry Save. Trrneoul Lirnn, Wiuln/Narrow, only be changed via program
software.
OUnder lhe VFO mode, lum clockwise or counterclockwise [ DIAL] to
increase or decrease lne frequency.
‘“ L
-aeww—-um—
ADVANCED OPERATION
OPERATION
POWER ON/OFF
1.Be sure lhe Battery Pack is inslalled, and lhe
battery is lully charged Connect the antenna
lo the lop panel ANTENNA ieck
z.Press and hold the key I omen: 1 ,me currenl
DC supply voltage will appear on the LCD lor
2 seconds, and beeps will be heard, lhe display
wlII resume its normal indication ofltte operating
Irequency.
3.Tp turn lhe transceiver ofl, press and hold lhe
key [ON/OFF 1 again lor one second.
ADJUSTING THE VOLUME LEVEL
RXCODE
You may sometimes want to hear calls lrom only
specific persons or groups in this case. use the
selective call allows you to ignore unwanled calls
lrom other persons who are using the same
lrequency
$3! the rucalvlng slgnal accordlng to me below
Inslructlons:
1)l=ress {MENU/LOCK] , rotate the [DIAL]
knots. come to MENU [1]: RXCODE
2)Then press I UN 1 key, enter the set mode
3)0lockwise or counterclockwise rotation of
I DIAL 1 knob to select from OFF 157 o-754N,
press I MENU/LOCK] again. to select the code
(Postlive or negative), such as 023N---023I
PuH the IDIAL] knob to unlock the mechanical dial lock, then rotate the
[ DIAL] knob alter press ltte key [VOL/MON] , to sel the desired audio
level. Clockwise rotation increased the volume level.
AOFF 4,571) A>023N 4,021“
NOTE:
[CTCSS:67Hza——254.1Hz(50 groups);
DCS:023N—754N(104 groupsn
4)Press [ u/v] key to save the setting and
EXIT. Press [MENU/LOCK] or [ PTTI .EXIT
to normal operation.
A“. A".
-w==~—-Mm—
TXCODE
Set Ihe transmitting signal according to the beluw
instructions:
1ll=ress [MENU/LOCK] . rotate the [DIAL]
knob, come to MENU [2]: TXCODE
2)Then press I UNI key. enter the set mode
3)Clockwise or counterclockwise rotation ol
I DIAL] knob to select lrom OFF / 67.0—754N,
press [MENU/LOCK] again, to select the
code (Positive or negative), such as 023N———
023l.
—“OFF —“57 0 —>023N —>023I
NOTE:
[CTCSSz67Hz—~254.1Hz(50 groups);Dcs:
ozansANiioA groupsil
4)Press [ UN] key to save the setting and EXIT.
Press [MENU/LOCK] or I P'I'I'] . EXlT to
normal operalion.
"”L
SQL (SQUELCH ADJUSTMENT)
souelch System allows you to mute the background
noise when no signal being received. The soueloh
system make 'Siandhy' operation more pleasanl,
and significanlly reduces battery current
consumption Please adjust the Squslch level
according to the following instructions:
1)Press I MENU/LOCK] , rotate the IDlALI
knob, come to MENU [3]: SQL
2)Then press I UNI ksy, come to the deIault
setting level SQL 5
lelockwise or counterclockwise rotation of
I DlALI knob to adjust between
0/1/2/3/4/5/6/7/8/9 (Default souelch level as
5) Select the level at which the background
noise is just eliminated when more is no signal
Press I UN] key to save the setting.
4)Press I MENU/LOCK] or I F‘TT] , EXIT to
normal operation
LIGHT(LCD ILLUMINATION ONIKEYIOFF)
UV—3R includes a reddish illuminelion lamp which
aids in nighttime operation The red illumination
yields clear viewing of the display in a dark
environment. with minimal degradation ol your
night vision. Three options for activating the lamp
are provided:
‘ 19 l
-w=w—-acm—
Key: illuminates the LCD when any key pressed.
on: illuminates the LCD continuously
OF Disables the LCD lamp
Here is the procedure forsetting uptlie Lamp
mode:
1ll>ress [MENU/LOCK] , rotate the [DlALl
knob, come to MENU [4]: LIGHT.
2)Then press I U/V] key to enter the set made
alClockwise or counterclockwise rotation oi bn
[ DlAl.) knob to set ONIOFF/KEy
4)Press [ UN] key to save the setting.
5)Press [MENU/LOCK) or [ PTT] , EXlT to
normal operation.
KTONE (KEYPAD BEEPER ONIOFF)
ii the Keypad Beeper will inconvenience you
(especially being operated in the silent room), you
may disable the Beeper according to the lollowing
instructions:
1ll=ress [MENU/LOCK] , rotate the [DIAL]
knob, come to MENU [5]: K TONE
2)Then press [ UN] key to enter the set mode
‘ml
3)Clockwise or counterclockwise rotation oi
[DlAL] knob to set ON/OFF
4)Press [ UN 1 key to save the setting
5)Press [ MENU/LOCK] orPTT] . EXiT lo
normal operation.
(ON—The beeper being activated, LCD displays
icon OFF-The beeper being disabled )
VOX(VOICE OPERATED TRANSMISSION)
vox eliminales lhe necessity of manually swilcning
lo lhe transmission Mode each time you wanl to
transmit. The transceiver automatically switches
to transmission mode when the vox circuitry
senses that you have begun speaking into the
microphone Please set awarding to lne ioliowing
instructions:
“Press [MENU/LOCK] .rotate the [DlAL]
knob, come to MENU [e]: vox
2)Then press K U/V ] key to enter the set mode
3)Clockwise or counlerclookwise rolation oi
[ DiAL 1 knob to set:0FF/1/2/3/4/5/6l7/8/9
4)Press [ UN ] key to save the setting
‘Z‘L
5)Press [MENU/LOCK] or [PTT] . EXIT to
normal operation.
NOTE:
Grade 779: the Most Sensitive vox Gain Levei—
Set under silent conditions
Grade 475: the Medium Sensitive vox Gain
Leveifsst under common conditions
Grade173: the Least Sensitive vox Gain Levei—
Set under too much noise conditions
When vox tunetlon is activated. the LCD will
display the iCON 'vo><'
POWER (HIGH/LOW RF OUTPUT
POWER SELECTION)
Seiect the High/Low RF Output Power, please set
according to the foiiuwing instructions:
1)l=ress (MENU/LOCK] .rotate the [DlAL]
knob, come to MENU [7]: POWER
2)Then press 1 UN 1 key to enter the set mode
3)Ciockwise or counterclockwise rotation ol
[DIAL] knob to set: HIGH/LOW
4)Press [UN] key to save the setting.
5)Press [MENU/LOCK] or [PTI'] , EXiT to
normal operation.
When set the LOW output power. the LCD will
dispiay the iCON [Low] ,and not display the
iCON [HlGH] ,whensetlheHlGHoutpt.llpower.
A”.
DW (DUAL WATCH FEATURE)
The transceivers Scanning features inciude a two—
channel scanning capabiiity. which allows you to
operate between UHF Channel and VHF channei
in the VFO mode, while periodically checking a
user-defined channsi for activity lf one channsi
is received the signal. the scannerwill pause on
that channei.
Piease activate the DW teature according to the
tollowing instructions:
1)Press (MENU/LOCK] , rotate the [DlALi
knob. come to MENU [8]: DW
2)Then press i UN] key to enter the set mode
3)Clockwise or counterciockwise rotation 01
[ DIAL] knob to SetZOFF (disabies the Duai
Warm tealureitott (activatsme Dual Watdl reaiwe)
4)Press i UN 1 key to save the setting
5)Press [MENU/LOCK] or [ PTT] . EXIT to
normal operation.
STEP (Channel Spacing Selection)
The UV—SR's frequency synthesizer provides the
option of utilizing channel steps of 12.5/25KHZ per
step (optional values ditfer dependlng on the band
selected). it you need to change the channel step
AZ’L
UiiFi'itF
increments, the procedure to do is very easy.
thress [MENU/LOCK] , rotate the [DlAL1
knob, come to MENU [9]: STEP
2)Then press 1 uN 1 key to enterthe set mode.
3)Clockwise or counterclockwise rotation ct
[DlAL 1 knob to select the new lrequency step
size [12.5125KHZ)
4)Press 1 UN 1 key to save the setting.
5)Press [MENU/LOCK 1 or lPTTl , EXlT to
normal operation.
OFFSET (Repeater Operation)
The UV—SR includes a number of lealures which
make repeater operation simple and enjoyable
1tl>ress [MENU/LOCK] , rotate the lDlALl
knob, come to MENU [10]: OFFSET
2)Then press 1 UN 1 key to enterthe set mode
3)Clockwise or counterclockwise rotation at
[DlAL1 knob to set the oftset frequency to—
37 995M/Dn—769395M).
4)Press [ UN 1 key to save the setting
stPress [MENU/LOCK] or [PTT1 . EXlT to
ncnnel operation
SHIFT (Repeater Shifts)
Depending on the part of the band in which you
are operating, the repeater shirt may be either
A“.
(in)
EFFEET
downward (-) or upward (e) One or these icons
will appear at the top or the LCD when repeater
shifts have been enabled.
thress [MENU/LOCK 1 , rotate the [DlAL1
knob, come to MENU [11]: SHlFT
2)'rhen press 1 UN 1 key to enterthe set mode.
3)Clockwise or counterclockwise rotation or
[ DlAL 1 knob to select the repeater shifts: 014+
AtPress 1 UN 1 key to save the setting
5)Press [MENU/LOCK 1 or [PTT1 , EXlT to
normal operation.
STE (Tail Tone Elimination)
To eliminate the annoying audio caused by carrier
wave disappearing after the transmitter ends the
communication ch should enable the Teil Tone
Elimination Oh the contrary, if you want
communication via the repeater, you should disable
the rail Tone Elimination.
”Press [MENU/LOCK 1 , rotate the lDlALl
knco. come to MENU [12]: STE
2)Then press 1 UN 1 key to enterthe set mode
3)Clockwise or counterclockwise rotation oi
l DIAL l knob to select the STE: ONIOFF
A)l=ress [UN] key to save the setting.
5)Press [MENU/LOCK 1 or lPTTl , EXlT to
normal operation
‘ 25 ‘
WIN (Wide/Narrow Band Selection)
1lt=ress [MENU/LOCK] , rotate the butt.)
knob, come to MENU [1 a]: W/N
thhen press [ UN 1 key to enterthe set mode.
3)Clockwise or counterclockwise rotation of
[ DIAL] knob to select the WIDE/NARROW:
4)Press t UN 1 key to save the setting
5)l=ress [MENU/LOCK] or [PTT] , EXIT to
normal operation.
SAVE (Battery Saver)
The UV—3R includes a useful Transmit Battery
Saver, which will automatically lower the power
output level when the last signal received was
very strong For example, when you are in the
immediate vicinity of a repeater station, there
generally is no reason to use the high power output
in order to achieve full quietlng access to the
repeater. with the transmit battery saver, the
automatic selection or Low Power operation
conserves battery drain significantly.
To activate the Transmit Battery Saver:
1lt=ress [MENU/LOCK] , rotate the butt.)
knob. come to MENU [14]: SAVE
thhen press [ UN 1 key to enterthe set mode.
3)Clockwise or counterclockwise rotation of
[DIAL] knob to select the SAVE: ON/OFF
4)Press t UN 1 key to save the setting
5)l=ress [MENU/LOCK] or [PTT] , EXIT to
normal operation.
A 26 L
TOT (Time-out Timer)
The TOT Feature pmvides a saiety switch, which
limits transmission time to a preprogramrneo value
This will conserve battery power by limiting the
length of transmissions. The TOT default is tens.
To adjust the timer, see the instmctinns below:
1)Press [MENU/LOCK] , rotate the low.)
knob. come to MENU [15]: TOT
zmren press [ UN] key to enterttre set mode.
3)Cl0ckwise or counterclockwrse rotation of
tow.) knob to select the TOT:
OFF/3DS/SOS/905/1208/1505/1308
4)F'ress [ UN 1 key to save the setting
5)Press [MENU/LOCK] or lP'I'I'] , EXIT to
normal operation
SCANM (Scan Mode)
The uvasR allows you to scan the memory
channels, entire operating band, or a portion of
that band It will halt on signals encountered, so
you can talk to the station on that frequency, ifyou
like To select the scanning mode, please see
below:
1)Press [MENU/LOCK] , rotate the low.)
knob, come to MENU [16]: SCANM
2)Then press [UN] key to enter the set mooe.
3)0lockwise or counterclockwtse rotation of
[ DIAL 1 knob to select the SCANM: TO/CO
Alpress [ UN 1 key to save the setting
5)l=ress [MENU/LOCK] or [PTT] , ExtT to
normal operation
A 27 L
|9t
t: “
‘-l
ELAYM (Repeater Sound Response)
The uvesR comes With the Repeater Sound
Response feature. When the teature is activated,
the handheld transceiverwrll hear the sound trim
the repeater, that means the handheld transceiver
is working vra the repeater Please see below to
activate the leatures
1)l=ress [MENU/LOCK] . rotate the [DIAL]
knob, come to MENU [17]: RELAYM
2)Thert press [UN] key to enter the set mode
slalockWise or counterclockwise rotation of
{DlAL} knob to select the RELAYM: ON/OFF
4)Press K UN 1 key to save the setting
5)Press [MENU/LOCK} or [PTT] , EXIT to
normal operation
BCLO Busy Channel Lock-out)
The BCL feature prevents the radio's transmitter
trom being activated it a signal strong enough to
break through the 'nolse‘ squelch is present. On
a frequency where stations using diflerent CTCSS
or 005 codes may be active BCLO prevents you
trom disrupting theirccmmunicaticns accidentally
(because your radio may be muted by its own
Tone Decoder). The default setting for the BCLO
is OFF The below instruction is the procedure to
activate the BCLO
1)l=ress [MENU/LOCK] , rotate the [DIAL]
knob, come to MENU [1B]: ECLO
2)Then press [UN] key to enter the set mode.
3)Clockwlse or counterclockwise rotation of
{ DlAL 1 knob to select the ECLO ON/OFF
4)Press K U/V ] key to save the setting
5)Press [MENU/LOCK} or [PTT] . EXIT to
normal operation.
A 28 h
PELAYl'1
ADDI110NAL FUNCTIONS AND SEITINGS
MEMORY CHANNEL STORAGE (Memory Channels 01-99)
Store the Memory channel according to the tollowing instructions:
lSeIect the desired trequency while operating in the VFO mode. Be sure to
set up any desired CTCSS or DCS tones, as well as any repeater ottset.
.Press {F/ALERT} button, then press {UN} key, Channel 01-99
will flash on the LCD, rotate [ DlAL] knob to store the channel between
channel 01799
lPress [UN] key to save the setting.
ORepeat the process above. to store other channels.
(Note Repeater offset trequency should be set via programming software.)
EMERGENCY ALARM FEATURE
Pressandholdme K F/ALERT] putronaoouttfzsemndscometathe Emergerw
Alarm Mode, emergenwalarmwillbeheardprese [ PTr] button, EXITtommal
operation.
FM RADIO FUNCTION
1)l=ress and hold the button [POWER] , come to the FM Radio Mode
leotate the [ DIAL] knoo to adlust the frequency. (The FM broadcast
coverage is 87 0MHZ|01OB OMHz, Frequency step as 100mm
3)Therl press and hold the [POWER] button, EXIT the FM Radio Mode.
4)Press and hold the [ UN] to svvilch the FM radio frequency mode
and the FM radio save channel mode
To save the FM radio channel, please see the tollowing instructions:
1)Under the FM radio frequency mode, set the trequency you want to save.
AZQL
z)Press the [F/ALERT] button, and then press the [UN] button,
01715 llashes on the LCD display. rotate the I DIAL 1 knob to save it w
3lPress the [UN] button to Cunflrm saving
In the FM radio mode, the communication between the transceivers Freq“e"°y Rama VHWG'W UHF4°°"7°M“1'D”“‘B“"“)
is priority. That means in the FM radio mode, when the signal come, Channel Capacity 99
the transceiver Will automatically exit the FM raoio made. Channel Spacing 12.5KH1
Operated Voltage 3.7v
FM RADIO SCANNING Standard Battery tzoomAh
ln the FM Radio mode, press [F/ALERT] button. then press
[MENU/LOCK] key to scan the complete band Clackwlse or
counterclockwlse rotation of [DIAL] knob to scan the band from low
Battery LWets—fyeo outy cycle) 8 hours
Frequency stability 2 5ppm(720‘CVGU“C J
to high or from high to low. When searches the certain channel, the operand Temvera'ure -30% 4501?
scanning Will stop at the channel. Rotate the l DIAL] knob, continuously Antenna lrnpeoance 50 Q
to scan from low to high crtrorn high to low. Press any key to exitthe scanning. Dimension 47m,“ x 31mm x mm
Weight About 130g
R FF R f ZW
TROUBLESHOOTING GUIDE “W” Yam
Modulation F3E
lam solutions Spurious Emission 265m;
' 45dE W l42dB N
No Power Check battery installation and/or replace batteries W W“ ( ) ( ’
. Transmitting Current st 4A
3133535333 The battery life is over. replace new one. Sensmyny (1 MB gimp) o zw
s urious Res onse
maww Verify that (he trequency and (he CTCSS you are p Rejection) GEMS
Mam using are the same as those ol your group members. Audio Output Pmr@m £1 N
Hearth; veicg Change your CTcss forthe channel You also Receiver Current s400mA
from Other Groups neeo the cross lor all the ratios in your group 55“de Current £75”
AWL Ami
DECLARATION OF CONFORMITY
We,FUJIAN NAN'AN EAOFENG ELECTRONlCS CO ,LTD (Address as
Changvu lndusmal Zone, Xiamel‘Nan'annuanzhuufujlamCmna.) hereby
declare our product
Product Name: Two Way Radio
Brand Name: BAOFENG
Model Number:UV—3R
ism complianoe mm Ihe essential requiremenls and mm relevanl provisions
of (he R&TI'E 2006/95/EC, 2004/108/EC and 99/5/EC, and Games the CE
mark accordingly.
Supplementary information:
The product complies with the requirements of:
EN6095071:2005¢A1|:2009; 5115033241000
ETSl EN 300 005-1 v1 3 1 (2000-09); ETSl EN 300 086-2 v1 2.1 (2000-09)
ETSl EN 301 459-1 v1 5 1 (2000-04); ETSl EN 301 409-5 v1 3.1 (2002-00)
Date: April 15,2011 Signature: WANG SHAO FENG
FUJIAN NAN‘AN BAOFENG ELECTRONICS co.,LTn.
CHANGFU lNDUSTRlALZONE‘XlAMElNAN‘ANQUANZHOU‘FUJIAN,CHINA
TEL:+BS—595—BS752889/86767889 FAX:+867595786753889
E-Mailzbaoveng@263 net htip://www powerphane com cn

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0 (Windows)
Create Date                     : 2011:07:13 14:21:05+08:00
Modify Date                     : 2011:07:13 14:55:37+08:00
Metadata Date                   : 2011:07:13 14:55:37+08:00
Creator Tool                    : PScript5.dll Version 5.2
Document ID                     : uuid:0713D94718ADE011B193ADF2F8880716
Instance ID                     : uuid:e937e428-44ea-4a31-a7d9-8d6b823bb829
Derived From Instance ID        : uuid:c3ed1cba-641d-48a8-8865-e9b8c814637e
Derived From Document ID        : uuid:03d59ced-70f5-4b06-9b25-1d29b0441070
Format                          : application/pdf
Creator                         : Administrator
Title                           : User Manaul.pdf
Has XFA                         : No
Page Count                      : 10
Author                          : Administrator

EXIF Metadata provided by EXIF.tools