FUJIAN NAN AN BAOFENG ELECTRONICS BF-F9V2 Two Way Radio User Manual
FUJIAN NAN'AN BAOFENG ELECTRONICS CO.,LTD. Two Way Radio
user manual
FCC ID:ZP5BF-F9V2 2.5 face Mid/ Mid/ SAFETYTRAINING INFORMATION Your FUJIAN NAN'AN BAOFENG ELECTRONICS CO.,LTD. radio generates RF electromagnetic energy during transmit mode. This radio is designed for and classified as “Occupational Use Only”, meaning it must be used only during the course of employment by individuals aware of the hazards, and the ways to minimize such hazards. This radio is NOT intended for use by the “General Population” in an uncontrolled environment. This radio has been tested and complies with the FCC RF exposure limits for “Occupational Use Only”. In addition, your FUJIAN NAN'AN BAOFENG ELECTRONICS CO.,LTD. radio complies with the following Standards and Guidelines with regard to RF energy and electromagnetic energy levels and evaluation of such levels for exposure to humans: FCC OET Bulletin 65 Edition 97-01 Supplement C, Evaluating Compliance with FCC Guidelines for Human Exposure to Radio Frequency Electromagnetic Fields. American National Standards Institute (C95.1-1992), IEEE Standard for Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz. American National Standards Institute (C95.3-1992), IEEE Recommended Practice for the Measurement of Potentially Hazardous Electromagnetic Fields– RF and Microwave. The information listed above provides the user with the information needed to make him or her aware of RF exposure, and what to do to as‐sure that this radio operates with the FCC RF exposure limits of this radio. Electromagnetic Interference/Compatibility During transmissions, your FUJIAN NAN'AN BAOFENG ELECTRONICS CO.,LTD. radio generates RF energy that can possibly cause interference with other devices or systems. To avoid such interference, turn off the radio in areas where signs are posted to do so. DO NOT operate the transmitter in areas that are sensitive to electromagnetic radiation such as hospitals, aircraft, and blasting sites. Occupational/Controlled Use The radio transmitter is used in situations in which persons are exposed as consequence of their employment provided those persons are fully aware of the potential for exposure and can exercise control over their exposure. Attention: This radio complieswith IEEE and ICNIRP exposure limits for occupational/controlled RF exposure emvironment at operating duty factors of up to 50% and is authorized by the FCC for occupational use only. An appropriate warning lable is affixed to all units. In order to comply with RF exposure requirements, a minimum distance of 2.5cm must be maintained when held-to-face, and body-worn operations are restricted to the approved original acessories (belt clip). Do not use this device when antenna shows obvious damages
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No XMP Toolkit : 3.1-701 Producer : Acrobat Distiller 7.0 (Windows) Create Date : 2014:11:21 14:08:05+08:00 Modify Date : 2014:11:21 14:16:29+08:00 Metadata Date : 2014:11:21 14:16:29+08:00 Document ID : uuid:51A5C5BE4471E4119806F77390F6740A Instance ID : uuid:dab26c3b-1c49-47c2-88b4-f6439ed058fe Derived From Instance ID : uuid:a613ad70-11e0-4464-bd93-e2ff9c5e4dde Derived From Document ID : uuid:03AE6E964471E411BAC2C06A93441595 Format : application/pdf Title : User Manual.pdf Creator : Administrator Has XFA : No Page Count : 11 Author : AdministratorEXIF Metadata provided by EXIF.tools