FUJIAN NEW CENTURY COMMUNICATIONS DM-607 DMR Radio User Manual Part 3

Download:
Mirror Download [FCC.gov]
Document ID	3099143
Application ID	Al+J94NkRMhR11PsYUDrbg==
Document Description	User Manual Part 3
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	307.51kB (3843826 bits)
Date Submitted	2016-08-15 00:00:00
Date Available	2016-08-15 00:00:00
Creation Date	2016-07-26 17:44:22
Producing Software	doPDF Ver 7.2 Build 365 (Windows XP Professional Edition (SP 3) - Version: 5.1.2600 (x86))
Document Lastmod	2016-07-29 16:45:01
Document Title	User Manual Part 3

26
ADVANCED FEATURES
OR
Press the preset [emergency mode ON/OFF) key to exit
the emergency mode.
Note:
o If your radio is set to "silent" option, the screen will not send
any sound or voice while in the emergency call mode, neither
from the target radio to receive a respond to any call until
users press the [PTT] key to initiate a call.
9 If your radio is set to "silent with audio" option, no audio or
visible indication is shown to the target radio. The radio will
prompt only when you press [PTT] key to initiate or respond
to a call.
Sending an Emergency Alarm and Voice
This feature allows users to send an emergency alarm to the
target radio/radios. After confirmation, your radio microphone
(MIC) and the transmitter will be automatically activated,
allowing you to communicate with other target radios without
the need to press [PTfl key. This activation of the microphone
function is called an lifimergency microphone?
If the user press [PTT] key during the programmed emergency
microphone transmission period, the radio ignores the PTT
press and remains in emergency mode.
Note:
9 If the user presses the [PTT] key during emergency
microphone, and continue to press [PTT] key after the
emergency microphone duration expires. Then the radio
continues to transmit the call until you release the [PTT] key.
Procedure:
1. Press the preset emergency mode on/off key.
2. LED indicator lights blue.
3. After you hear the Tx Begin Tone (if activated), users can
speak clearly with the microphone(MlC), when the %mergency
microphone? is activated, radio will automatically start to
transmit signals without needing to press the [PTT] key until
a default emergency microphone time is over then it will stop
to transmit.
4. During the transmission, the LED indicator lights blue (if
activated).
5. After the emergency microphone is over, the radio will
automatically stop transmit the signals. To start again, press
[PTT] key to transmit.
Note:
6 lfyour radio is set to "silent" option, no audio or visible
indication is shown in the emergency call mode, neither from
the target radio to receive any response, until an emergency
mic transmitting time iS over and you have to press the [PTT]
key.
ADVANCED FEATURES
0 If your radio is set to "silent with voice" option in emergency
call mode when you use the emergency microphone to initiate
a call, or when the default emergency microphone time has
ended, no audio or visible indication is shown but only when
you press [PTT] key, these indication will appear again.
Re-initiate Emergency mode
Underthe following two circumstances, you need to re-access
the emergency mode:
1. Changing channel manually in emergency mode will force
the radio to exit the emergency mode. If you need to activate
the emergency alarm on the new channel, you have to press
the preset [Emergency mode) key again.
2. Press the preset [emergency alarm ON/OFF] key while
emergency alarm is activated and is transmitting, this will
enable the radio to exit the emergency alarm mode, users
need to re-press the preset [emergency alarm ON/OFF] key,
and then restart the emergency alarm call.
Exit the emergency mode
The radio will exit emergency mode under the following three
circumstances:
1. The emergency alarm acknowledgement is received while
your radio is activating emergency alarm (For emergency
alarm ONLY), your radio will exit emergency mode.
2. The maximum number of attempts to perform an emergency
alarm call, it will automatically exit emergency alarm mode.
3. When the preset [emergency alarm switch] key is pressed,
your radio will exit emergency alarm manually.
Note:
0 If your radio is powered off during an emergency call, it will
exist the emergency mode. The radio will not reinitiate the
emergency mode when the radio is turned on.
ENCRYPTION
If this feature is enabled, it is advantageous to prevent other
users from using the software encryption method without
authorization. Part of the transmitted signal and user
identification is not encrypted. The radio must enable the
channel's encryption function to transmit the encrypted signal,
although this is not required to receive / transmit. At the same
time in the encryption of the channel, the radio can receive
a clear transmission signal.
9 Your radio supports the following types of encryption:
. Low — Basic encryption
. Middle — Strong encryption
. High — Enhanced encryption
Note:
AOnly one of the above mentioned types can be assigned
to a radio.
28
ADVANCED FEATURES
9 To decrypt the encrypted call or data transmission, user
must have the same encryption key or the same key level,
key value and key ID. If user receive a different encryption
key, key value and ID key with encryption call , user can hear
the confusing transmission of signals (basic encwption) or
listen to nothing( Enhanced / super strong encryption).
Procedure:
1. Press the preset [Encryption ON / OFF) key
Note:
9 Your radio must be pre—programmed to allocate the key
values, Key ID and encryption type.
0 Some types of radios may not provide a single channel
encryption or not encryption function. Please contact your
dealer or system administrator for further information.
ADVANCED SERVICESQ
Advanced services are needed to be programmed by software
beforehand, and can be accessed by the user—defined keys.
Radio detection Q
If this is activated, you can check whether the target radio is
available or not without disturbing. The target radio won't
receive any audio or visible notice. This function is only
available for the user alias or ID.
Procedure:
1. Press the preset [radio detection) key.
2. If the target radio is available in the system, your radio will
sound alert.
Remote monitor ®
Use the remote monitor function to switch on the microphone
ofa target radio (user alias or ID only). No audio or visible
indication is shown to the target radio. You can use this
function to monitor the surrounding activities of the target
radio.
Procedure:
1. Press the preset [Remote monitor) key.
Note:
6 If the target radio is activated successfully, you will hear a
prompt sound from the target radio.
9 Your radio must be programmed through programming
software to use this function.
Radio Kill 3
You can kill any other radios in the system. For example, you
may want to kill a stolen radio to prevent the thief from using
it, and re-activate that radio when it is retrieved.
Procedure:
1. Press the preset [radio kill] key.
Note:
ADVANCED FEATURES
o If the target radio is killed successfully, your radio will receive
a beep sound.
0 Performing Radio Kill is limited to radios with these function
activated. Check with your dealer or system administrator for
detail information.
6 Your radio must be programmed through programming
software to use this function.
Radio Revive
Users can activate any other radios which have been killed.
For example, users might want to re-activate and use a stolen
radio which has been killed..
Procedure:
1. Press the preset [Radio Revive) key.
Note:
0 While reviving, it will send out the remote revive signal to
the target radio, if the signal is picked up successfully by the
target radio, your radio will receive a beep sound.
6 Only the radio with this function activated can carry out this
function. Please contact your dealer or system administrator
for further information.
0 Your radio must be programmed to allow user to use this
function.
SETTINGS
If your dealer or system administrator allows you to set the
basic settings and operation through definable key, then you
could check and set the following settings via definable key.
0 You could check or set the following settings.
. High / low power selection
. Squelch level options
. Turn ON or OFF VOX
. Check battery power strength
High/ low power setting
If your dealer or system administrator allows you to do preset,
you could check and set the radio power level through definable
key to prolong the battery working life.
Note:
A High power ensure a long distance communication with
target radio.
A Low power ensure a short distance communication with
target radio.
Procedure:
1. Press preset [High/Low Power selection) to switch the
high power and low power.
Note: Once the power level is changed, the radio will do a
sound prompt (If activated).
29
30
ADVANCED FEATURES
Prompt tone type setting
If your dealer or system administrator allows you to do preset,
when you do the radio operation, the radio will sound prompt
tone or voice prompt.
. Power ON radio — Prompt tone, voice prompt, si ence
(Default: Voice prompt)
- Power OFF radio — Prompt tone, voice prompt, silence
(Default: Voice prompt)
a Channel selection — Prompt tone, voice prompt, si ence
(Default: Voice prompt)
o Power level check — Prompt tone, voice prompt, silence
(Default: Voice prompt)
. Low power alert — Prompt tone, voice prompt, si ence
(Default: Voice prompt)
- Power selection — Prompt tone, voice prompt, si ence
(Default: Voice prompt)
- Squelch level selection — Prompt tone, voice prompt, silence
(Default: Voice prompt)
o Scan ON/OFF — Prompt tone, voice prompt, si ence
(Default: Voice prompt)
. Current channel check — Prompt tone, voice prompt, silence
(Default: Voice prompt)
- Alarm ON/OFF — Prompt tone, voice prompt, silence
(Default: Voice prompt)
- Private call prompt — Prompt tone, voice prompt, silence
(Default: Voice promp
I Group call prompt — Prompt tone, voice prompt, silence
(Default: Voice promp
. General call prompt — Prompt tone, voice prompt, silence
(Default: Voice promp
- TOT prompt — Prom
Voice prompt)
pt tone, voice prompt, silence (Default:
- BS revive timeout — Prompt tone, voice prompt, silence
(Default: Voice promp
. Encryption ON —
(Default: Voice promp
. Encryption OFF —
(Default: Voice promp
. VOX ON — Prompt
Voice prompt)
. VOX OFF — Promp
Voice prompt)
. Zone Selection —
(Default: Voice promp
Prompt tone, voice prompt, silence
Prompt tone, voice prompt, silence
tone, voice prompt, silence (Default:
tone, voice prompt, silence (Default:
Prompt tone, voice prompt, silence
Prompt tone volume setting
You or your dealer or system administrator could set your
radio sound prompt volume via programming software.
0 ptions:
ADVANCED FEATURES
. 1 — minimum
. 13 — Maximum
. Default: 10
Squelch level setting
You could adjust the radio squelch level to eliminate some
week and useless signal call or channel with background
noise higher than normal value
Setting: Normal default value is level 4. The highest level is 9.
Note: The highest squelch level may prevent some long
distance call.
Procedure:
1. Press preset [squelch level) key
2. You will hear a prompt tone (if activated).
Options:
0 — Squelch ON
1 — Minimum
9 — Maximum
Default : 4
Turn ON I OFF VOX
If required, you could turn ON the preset VOX feature, and
no need to press PTT to issue a call. Whenever the microphone
of accessories with VOX detects voice sound, the radio will
transmit automatically, and keep transmitting during voice
detected.
Note:
9 You could adjust the VOX transmitting sensitivity through
MIC gain via programming software.
0 The higher VOX level the higher sensitivity to detect voice.
User need to set it based on working environment.
9 Level selection:
. 12 — Highest sensitivity
. 1 — Lowest sensitivity
. Increment: 1
. Default: 4
Procedure:
1. Press preset [VOX ON / OFF] key to turn on or off the
feature.
2. A prompt tone will be sounded (if activated).
Note:
1. To turn it ON or OFF is only valid for the radio with VOX
feature. Please contact your dealer or system administrator
for more detail.
2. If prompt tone is activated, then please speak to radio
microphone after a prompt tone heard.
lnfonnation Check
If your dealer or system administrator allow to preset, you
could check the following information of radio through definable
key defined with information check.
31
32
ADVANCED FEATURES
1. Power level
2. Battery strength level
3. Current channel mode
4. Current working zone
Procedure:
1. Press preset [Information Check) key.
2. A beep sound will be heard (if activated).
GENERAL GUIDE FOR FAULT HANDLING
Malfunction
Analysis of causes
Handling method
Fail to turn ON radio
Battery is installed incorrectly
Re-install battew
Battery power lower than preset value
Please change or charge battery.
Bad battery contacts or contacts in dirty.
Check and clear the battery. contacts.
The sound get lower or unclear
or interrupted during receiving
signal
Battery power get lower.
Please change or charge battery.
Volume control at low value.
Adjust the volume to be higher.
Antenna gets loose or antenna frequency
is incorrect.
Power off radio, and re-install antenna,
or change antenna with right frequency.
Speaker is blocked or damaged.
Try to clear the outer speaker or contact
your dealer.
Using the radio under poor working environment
or electromagnetic interference
Change working environment or shift
antenna direction.
Fail to talk with group members
The current working channel frequency or
signaling setting is different with other group
members.
Change channel or reset signaling to be
same as other group members
The setting of Digital or analogue channel is
incorrect.
Reprogram the current digital or analogue
channel.
Far away with that group members.
Get closer to that group members.
Pops up other communication or
noise on the current channel.
To be interfered by other members.
To change frequency or channel.
Did not program with relevant signaling
To program signaling for the group member to
prevent same frequency interference.
Louder noise during
communication
The communication distance is too far
between members.
Get closer to other members
To be blocked by high building, or be onlower
landform or basement etc working environment.
Go for open air area, and turn on radio again
for a try.
33
34
GENERAL GUIDE FOR FAULT HANDLING
Malfunction Analysis of causes Handling method
Louder noise during To be interfered strongly by external Try to keep away with instruments or
communication environment or others. equipments which may cause interference.
Radio without GPS feature; Or is working
GPS fail to positioning (Optional) under poor working environment that fails
to receive GPS signal.
To add GPS features or move to work in the
open air.
Note: If the above methods fail to solve your problem, or you confront other different malfunctions, please contact your local
dealer or appointed maintenance station for more supports.
MAINTENANCE AND CLEAN
To make sure the radio's best performance and prolong its
working life, please be acquainted with the following contents,
so that you can do well maintenance and clean for the radio.
Maintenance
© Please do not scratch or puncture the device with hard
matter.
© Please do not place the device under the environment
which can corrode electronic circuit or under sun direct
radiation.
© Please do not carry the device by handing its antenna or
headset.
CD Please make sure the SP-MIC be covered well if it is not
In use.
Clean
Please clean your device regularly by using dry laid fabric or
soft brush to wipe the dust on surface and charger contacts;
The keypads, control knob and housing case of the device
are easy get dirty. Please use nonwoven wipes to clean them.
Please do not use chemical to clean it such as detergent,
alcohol, spray or petroleum products, or the device surface
or printing character maybe damaged. Before power on the
radio, please make sure the device is dry completely.
35
36
Standard accessories
AC Adaptor Charger Li-ion Battery
(1500mAh)
:3
\ Antenna Belt Clip Tie
OPTIONAL ACCESSORIES
Air conduit earphone
Li-ion Battery
(2300mAh)
Earphone-1
Programmable cable
Earphone-2
Speaker microphone
37
Kydera®
PROFESSIONAL DIGITAL TWO-WAY RADIO

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
Create Date                     : 2016:07:26 17:44:22+08:00
Modify Date                     : 2016:07:29 16:45:01+08:00
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Metadata Date                   : 2016:07:29 16:45:01+08:00
Producer                        : doPDF Ver 7.2 Build 365 (Windows XP Professional Edition  (SP 3) - Version: 5.1.2600 (x86))
Document ID                     : uuid:3fb691f9-73fb-452e-b117-01c09d46aa9d
Instance ID                     : uuid:136228df-d8f3-455f-8f97-2fa3c3eacbff
Format                          : application/pdf
Page Layout                     : OneColumn
Page Mode                       : UseNone
Page Count                      : 13

EXIF Metadata provided by EXIF.tools