FUJIAN NEW CENTURY COMMUNICATIONS DM-850 DMR TWO WAY RADIO User Manual Part 3
QUANZHOU CITY NEW CENTURY COMMUNICATION ELECTRONICS CO.,LTD. DMR TWO WAY RADIO Part 3
Contents
- 1. User Manual Part 1
- 2. User Manual Part 2
- 3. User Manual Part 3
User Manual Part 3
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3055377 |
| Application ID | 2mwTqInmuVvwKvVu0Fo2CA== |
| Document Description | User Manual Part 3 |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 222.38kB (2779775 bits) |
| Date Submitted | 2016-07-07 00:00:00 |
| Date Available | 2016-07-07 00:00:00 |
| Creation Date | 2017-12-09 18:49:43 |
| Producing Software | GPL Ghostscript 9.18 |
| Document Lastmod | 2017-12-09 18:49:43 |
| Document Title | DM 850说明书 英文 20160616.pdf |
| Document Creator | PScript5.dll Version 5.2.2 |
| Document Author: | XM156 |
52 View the setting of menu function and operation The screen shows "Volume Saved” and backs to the previous men u 5 Press [Back] to return to the previous menu El Low Battery Alert If it is allowed by dealer or system administrator, users can set and check low battery alert through menu display Low Battery Alert Setting You can turn on oroflthe low battery alert and adiust its volume. Procedure ‘i Press [Menu] Key Io access the menu 2 Press [A/V] key to select "Settings" and press [OK] key 3. Press [A/V] key. select "Prompt Tone" and press [OK] key. 4. Press [A/V] keyto select ”Low Battery Alert' and pressloK] key 5 Press [A/V] key to select the desired sub-menu and press [OK] key Press [A/V] key to select “ON/OFF" and press [OK] key Press [A/V] key to select “ON" and press [OK] key. The screen shows "Alert Saved” and backs to the previous menu. DR Press [A/V] key to select “ON" and press [OK] key. The screen shows ”Aerl Saved" and backs to the previous menu OR Press [A /V] keyto select "Volume Control" and press [OK] key Press [A/V] key to select the volume, and press [OK] key. The screen shows ”Volume saved" and backs to the previous men u. 5 Press [Pack] to return to the previous menu. El Message Tone it it is allowed by dealeror system administrator. users can set and check the message tone through menu display. Message Tone Setting You can selectthe desired message lone (tone 1 - 5) showed when there is a message received Procedure: 1 Press [Menu] key to access the menu 2 Press [A/V] key to select "Settings" and press [OK] key 3 Press [A/V] key, select "Prompt Tone" and press [OK] key 4. Press [A/V] key to select ”Message Torte" and press [OK] key 5 There are different message lone options on the display 6. Press [A/V] keyto select the desired «me and press [OK] key 7 The screen shows ”Tone Saved" and backs to the previous men u a Press [Back] In return to the previous menu El Private Call Tone it it is allowed by ctealer or system administrator. users can View the setting of menu function and operation set and check the private call lone through menu display Private Csll Tone Setting You can turn on or ofl private call tone when the radio transmits or receives the private call, and select the desired tone from tone 1 to tone 5. You can turn on or off the private call tone in 4 dillerent modes. 0 Tx Begin Tone 7when you press [PTT] key to transmit. - Tx Ended Tone 7 when you release [P'IT] key. 0 RX Begin Tone 7 when the radio is in receiving - Rx Ended Tone 7 when the radio stops receiving Note: Tick "ti‘ " to turn on the tone. Untick "v " to turn onthe tone Procedure: 1 Press [Menu] key to access the menu 2 Press [A/V] key to select "Set|ings"and press [OK] key 3 Press [A/V] key, select "PromptTone'and press [OK] key 4. Press [A/V]keymselec1“anale Call Tone" and press [OK] key 5 Press [A/V] key to select the desired sub—menu and press [OK] key Press [A/V] key to select ”ON/OFF” and press [OK] key Press [A/V] key to select "ON"ur "OFF"arld press [OK] key. The screen returns to the previous menu. oR Press [A/V] key to select "Ring Tones" and press [OK] key There are different lone options (lone 1-5) on the display Press [A/V] key to select the desired tone and press [OK] key The screen shows 'Tone Saved"and backs to the preVious menu 6 Press [Back] to return to the previous menu. El Group Call Tone ll it is allowed by dealer or system administrator. users can set and check the group call tone through rnenu display Gmup Call Tone Setting You can turn on or off group call tone when the radio transmits or receives the group call, and select the desired tone lrom tone 1 to tone 5. You can turn on or 0" the group call tone in 4 dlflererlt modes - Tx Begin Tone 7when you press [PTT] key to transmit. - Tx Ended Tone 7 when you release [P'IT] key. - Rx Begin Tone 7 when the radio is receiving. - Rx Ended Tone 7 when the radio stops receiving. No - Tick "y‘ " to turn on the tone. Untick "v " to turn oflihe tone Procedure: 1 Press [Menu] Key to access the menu 2 Press [A/V] key to select "Settings“and press [OK] key 3 Press [A/V] key, select ”PromptTone"and press [OK] key 4. Press [A/V] key to select "Gmup Call Tone"and press[OK] key 5 Press [A/V] key to select the desired sup-menu and press 53 54 View the setting of menu function and operation [OK] key Press [A/V] key to select "ON / 0FF"and press [OK] key Press [A/V] key to select "ON" or "OFF”and press [OK] key. The drsplay returns to the previous menu DR Press [A 71 key to select ”Ring Tunes" and press [0k] key There are different tone nptlons (time 1-5) hsted on the drsplay Press [A/V] key to select the deslred tone and press [OK] key The screen shows "Torte Saved" and backs to the prevrcus menu. 6 Press [Back] to return to the preyrcus menu. El Call Alert Tones ll rt is allowed by dealer or system admlnlslralor, users can set and check the call alert tone through menu display. Call Alert Tone Users can turn on or on call alert tone when the radio transmrts or receives the prrvate call, and select the deslred tcne lrcm tone t to tone 5 Procedure: 1 Press [Menu] key In access the menu 2 Press [A/V] key to select "Settrngs"and press [0k] key 3 Press [A/V1key, select "PremptTone'anu press [OK] key 4. Press [A/V] key to select ”Call Alert Tone" and press [0k] key 5 There ls call alert tone hst on the drsplay 6. Press [A/V] keytp select the deslled tone and press [OK] key 7 The screen shows "Tone Saved" and hacks to the prevlous men u. 3 Press [Back] to return to the previous menu. Basic Settings lt rt is allowed by dealer or system admrnrstrator, users can set and check basic settings ot your radio through menu display. You can set or check the followlng baslcfuncllons . Language . keypad Lock . Backlrght . Version . Dlsplay Mode . Encoder Knob . vox El Language ll rt is allowed by dealer or system admrnrstrator, users can set and check language of the radio through menu dlsplay Language Setting Yuu can select one language from the preset language list on your radlo to be displayed on your radio Procedure: 1 Press [Menu] key to access the menu View the setting of menu function and operation 2 Press [A/V] key to select "Semngs" and press [OK] key 3. Press [A/V] key. select "Baslc Settrngs" and press [OK] key 4 Press [A/V] key to select "Language“and press [OK] key 5 There ls drtterent languages Ilsled on the drsplay 6 Press [A/V] key to select the desrred language and press [OK] key 7. The screen shows "Language Selected"and hacks to the prevrous menu. 8 Press [Back] to return to the prevlous menu. El Keypad Lock ll rt ts allowed by dealer or system admrnrstrator, users can set and check the keypad lock through menu dtsplay. Keypad Lock Setting You can select any mode at keypad lock accordrng to your need. tn case that there ts unnecessary character tnput. You can select one ol the lollowrng modes ol keypad lock. . Aulo— The keypad wrll he looked when there ts no cpelallcn for t mln. . Manual 7 Press [OK] key and then press [‘1 key to unlock the keypad Procedure: t Press [Menu] Key Io access the menu 2 Press [A/V] key to select "Settings" and press [OK] key 3 Press [A/V] key, select ”Bastc Settrngs" and press [OK]key 4. Press [A/V] key to select "Keypad Lock" and press [OKlkey 5 There are dtflerent keypad lock modes on the drsplay. 5. Press [ [OK]key Press [A/V] key to select "Auto-and press [OK] key Press [A/V] key to select “0NIOFF”and press [OK] key The screen shows "Mode Selected" and backs to the previous /V] key to select the desired mode and press menu. OR Press [A/V] key to select ”Manual"and press [OK] key Press [A/V] key to select ”0NIOFF”and press [OK] key The screen shows "Mode Selected" and backs to the previous menu. 7 Press [Back] to return to the previous menu. Note: Press [OK] key and then press [1 key to unlock the keypad. El Bauklight ll rt is allowed by dealer or system admlmslralur, users can set and check the hacklight through menu dlsplay LCD light Mode and Brightness You can set the LCD lrght mode and lrghtness to save the power of pottery You can select from the tollowrng LCD light mode e On — the LCD light remalns solid on 55 56 View the setting of menu function and operation . Off 7 the LCD light is off (there is micro light) . Auto 7 the LCD light will he oft automatically when there is no operation tor more than 1 minute. And it will light when you press the key or there is signal received Procedure: Press the preset [LCD Light ON/OFF] key to sWitch between LCD ON or OFF CR 1 Press [Menu] Key to access the menu 2 Press [A/V] key to select "Set|lngs"and press [OK] key 3 Press [A/V] key, select "Basic Settings" and press [OK] key 4 Press [A/V] key to select "LCD Light" and press [OK] key 5 Press [A/V] key to select the desired sub—menu and press [OK] key Press [A/V] key to select ”ON/OFF” and press[OK] key The LCD nghl Modes Will be listed on the display Press [A/V] key to select the desired mode and press [otqkey The screen shows "Mode Selected" and backs to the previous menu. Press [Back] key to returns to the previous menu OR Press [A/V] key to select "Brightness" and press [OK] key Press [A/V] key to select the desired brightness and press [OK] key The screen shows "Saved" and backs to the preyious menu 5 Press [Back] key Io returns to the preyious menu DVersion it it is aHowed by dealer or system administraluri users can set and check the version ot the radio through menu display View Version information You can check the version information of your radio if needed Procedure: t Press [Menu] Key to access the menu 2 Press [A/V] key to select "Settings"and press [OK] key. 3 Press [A/V] key. select ”Basic Semngs"and press [0K]key 4 Press [A/V] key to select "Versionvand press [OK] key 5 The screen shows the version intormation of the radio a Press [Back] key to returns to the prevrous menu El Display Mode if it is permitted by dealers or system administrator users can set and check display mode ottheir radio through menu display Display mode options: . Channel No & Name — Channel numherand preset contact name will be displayed on screen . Channel No a. Freq — Channel number and frequency will be displayed on screen . Channel No — Channel number to he displayed on screen View the setting of menu function and operation Procedure: l Press [Menu] key to access the menu 2 Press [A/V] key to choose "Settings" then press [OK] 3 Press [A/V] key to choose "Others" then press [OK] 4 Press [A/V] key to choose "DispMode" then press [OK] 5 Display modes list Will be displayed on screen 5 Press [A/V] key to choose your desired mode and then press [OK] 7 "Setted" pops up on screen once the operation completed and back to previous menu. El Encode switch if it is permitted by dealers or system administrator. users can set and check encoder switch. Channel Switch Users can turn ON or OPP the channel sWitch or press] keypad lock] key to prevent accidentally press fmm changing channel. Procedure: l Press [Menu] key to access menu. 2 Press [A/V] key to choose "Settings" then press [OK] 3 Press [A/V] key to choose "Olhers" then press [OK] 4. Press [A/V] key to choose "Channel sWitch" then press [OK] 5 ON or OFF Will be displayed on screen 5 Press [A/V] keyto choose yoordesired set and then press [OK] 7 "Setted" pops up on screen once the operation completed and back to previous menu El vox ifil is permitted by dealers orsystern administrator. users can set and check vo>< feature and sensitivity level through rnenu display vex Switch Users can turn ON vox, so that they can initiate the call Without pressing [Pi-r] key If the microphone With vo>< detects voice, the radio Will auto transmitting until the microphone falls to detect voice Note: To turn on or off vo>< only be eftective against the radio with vox ON Please contact yourdeaier or system administrator for more intormation Procedure Press the preset [vo><] key. vo>< will be sWitched between ON and OPP Or operate via following instruction 1 Press [Menu] key to access menu 2 Press [A/V] key to choose "Settings" then press [OK] 3 Press [A/V] key to choose "Others" then press [OK] 4 Press [A/V] key to choose "vox" then press [OK] 5 Press [A/V] key to your desired sub-menu. and press [OK] 57 58 View the setting of menu function and operation Press [A V] key to choose "vox SWiton" then press [OK ]; "Tum On” and "Tum OFF" Will he displayed on screen Press [A/V] key to choose desired set. then press [OK] to confirm, and pack to previous menu OR Press [A/V] key to choose "vox Level” then press [OK ]. "One to Twellth" will be displayed on screen Press [A/V] key to choose desired level. then press [OK] to confirm, and pack to prevrous menu 5 Press [Back] to back previous menu. Note: 0 The higher level the higher sensitivrty [or voice detected User need to program it according the worklng environment. Restore Factory ll it is permitted by your dealer or system administrator, users are allowed to set and restore radios to fatory default from menu display. Restore factory setting Users can restore some oasic settings to factory delault. il required Procedure l Press [Menu] key to access menu . 2 Press [A/V] key to choose "settings" then press [OK] 3 Press [A/V] key to choose "StorPaotory" then press [OK] 4 Awamlrlg note will pop up on screen [or your double check 5 Press [OK] again to confirm, and back to previous menu OR Press [Cancel] to cancel it and hack to previous menu 5 Press [Back] to back previous menu l FM Radio lr it is permitted by your dealer or system administrator. users can operate or check FM radio lrom menu display FM radio operation Users can turn ON orOPP FM radio. and listen to FM program and save it if required. Prooedure: 1 Press [Menu] key to access the menu. 2 Press [A/V] key to choose "FM Radio” then press [OK] 3 Screen will display received FM lrecuency Press [A/V] key to seek or select FM frequency Press [Back] to exit FM radio on Press [0k] screen Will display sup-menu options Press [A/V] to choose your desired option, then press [OK] 0 Press [A/V] to choose ”Save Ch” and press [OK] 0 FM list saved" will pop up once operation done And pack to previous menu. View the setting of menu function and operation . Press [Back] to exit FM radio on . Press [A V] to choose "Sel Saved CH" and press [OK] . Screen will display a list ot saved FM channels . Press [A/Vlto choose desired channel tor furtheroperatiori ll Press [A/V] to choose "Delete" and press [OK] Awarning note will pop up for your double check Press [OK] to confirm, and a note pops up means operation done Or press [Cancel] to cancel the operation. and back to upper menu. OR Press [A V] to choose “PLAY” and press [OK] Screen Will pack to FM radio. and play the selected FM channel. oR . Press [A/V] to select "Seek Mode” and press [OK] . Press [A/V] to choose "Manual" or "Auto" mode, and press [OK].Thert a note pops up and means operation succeeded. . Press [Back] to exit FM radio Note: 0 To choose "Manual" the radio will seek FM radio frequency by step frequency at toolvlhz. 0 To choose "Auto” the radio will auto seek FM treouency Once signal received. it Will stop seeking and start playing the program 00nce you are listening to FM program, iryou press P'I'I' key, FM radio Wl|| be exiled ternperately until P'I'I' released I Scan ll it is permitted by your dealer or system administrator. users can check or operate scan feature through menu display Scan ON or OFF Once scan ls enabled, Ihe radlu will starl scan cycllcally to check if there ls any aciivitles ln the channel under the scan Ilsl Once Ihe scan ls ON, the LED will flash RED, and scan icon [C] will be displayed on the top ot screen When mixed modes (analogue and digital) channels under scanning, it your radio stays on a digital channel, but radio scans an analogue signal and locked on the channel. then the radio Will auto sWitch to analogue mode from digital mode during the calling duration, vice versa. Scan mode: When you activate the scan, radio will start scan preset channels orgroups in the scan list According to your preset, the scan may start trorn the last active channel or group that belng scanned, or troni the channel that radio currently stays on Note: 0 ”Talkback" or "Scan 'r>< mode" and "Appointed channels" etc scan detail settings can be preset by your dealer or system admtnistralor 59 60 View the setting of menu function and operation Procedure: Press defined [Scan] key to iurn ON or OPP scan OR IO turn On Or aif scan swiicn as eekiw. 1 Press [Menu] key to access the menu. Press [A/V1tn choose “Scan" then press [OK]. Screen disp]ays sub—menu Options. Press [A/V]tc choose “Scan" tnen press [0k]. Scan |rst drsp]ayed on screen. mature 5 Press [A/V]to choose yourdesired [lems and press [OK] 7 “Start scan” and "D]sab]e scan” wiu be drsp]ayed on screen for se]ecirdn To choose "Stan scan" and press [OK], a scan [can w]II pe disp]ayed cn screen, and radio back icncrne screen the 0 Once scan activated, LED wru flash RED and scan [con [C ]d]splayed on screen OR Tc cnccse "D]sable scan” and press [OK] A note pops up on screen and then pack to prewous rnenu Note: 0 Once Scams drsapled, LED M" be air, and scan can [3 ] wiH disappear ircrn mam screen Scan mode ][ rt [5 permrued by your dea]er Or system admrnrstratcr. users can cneck Or operate scan mode through menu drsp]ay . El Scan mode setting You can selecttne processing modes when tne radrc detects srgna] over the arr If needed OOpirons . co (camer) 7 Once radm recewes a scanned S]gnal over the air, it wrl] stay on that cnanne] unti] signal disappears, and men contmue to scannmg . TO (Time) 7 Once tne radio receives a scanned srgna] cvertne arr. rtwrl] stay on that cnannei for a preset trme. Once trrne ls cut, I| wm Conlmue to scannmg . SE (Seek) — Once the radio receives a scanned srgnai cyerine air, [t M" siay on inai channel and step scannmg unti] ycu [e—aclivale to scanning Procedure: 1 Press [MENU] to access tne menu. 2 Press [A/V] id cnocse "scan mode" and press [OK] 3 Sub-menu under scanwru d]splays en screen 4 Press [A/V] to cnccse desrred scan mode, and press [OK]. 5 Once operation rs ccmp]eted, a note wrl] pop up on screen, and then back to prevrcus menu 5 Press [Back] is back prevmus menu View the setting of menu function and operation chan List Users can preset scan lists and assign them to single channels or groups Radio Wl|| scan cyclically to check illhere is voice signal on current channel or group Your radio supports up to 16 scan lists, and each scan can contain a maximum cl 5i2channeis Each soan list supports ooth digital and analogue modes it it is permitted by your dealer or system administrator, users can edit, add, delete or choose priority channels through menu display. El check Scan List members Procedure: l Press [Menu] to access the menu 2 Press [A/V] to choose "Scan" and then press [OK]. 3 Scan subsmenu options listed on screen 4 Press[A/V]to choose "Scan List" and then press [OK] 5 All Scan lists displayed on screen 5. Press [A/V] to choose desired scan list. and then press[OK]. 7 All channels number or name on the scan list will be displayed on the screen a PressiA/V] to check the scan list members 9 Press [Back] to back preyious menu. DMd new memberstn the scan list Procedure: l Press [Menu] to access the menu 2 PressiA/V] to choose "Scan" and then press [OK] 3 Scan subsmenu options listed on screen 4 PressiA/V] to choose "Scan List" and then press [OK]. 5 Scan list items displayed on screen. 5 PressiA/V] to choose desired scan list, and then press [OK] 7 All channel Numbers or names on the scan list will be displayed on screen a PressiA/vl to choose ”ADD CH" 9 Press [OK] The screen Will display the avaliabie channels Numhers or names for adding to Press [A/V] to choose desired channel numberor name ll. Press [0k] to add it to scan list, cackto scan member list OR Press [Back] to back to scan list. lz. Press [Back] to back previous menu. Note: 0 it you wish to continue to add new members. please repeat the above steps from etc 11 El Priority Channel or disable priority channel. Procedure: l Press [MENU] to access the menu. 2 Press [A/V] to choose "Scan" and then press [OK] 61 62 View the setting of menu function and operation 3 Scan sub-menu optrons Ilsled on screen A Press [A/V] lo choose "Scan Llst” and then press [OK] 5 Scan lrst items dlsplayed on screen a Press [A/V] to choose deslred scan lrst. and then press [OK] 7 All channel Numbers or names on the scan Ilsl will be displayed on screen 8 Press [A/V] to choose desrred channel number or name. and press [OK] 9 Press [A/V] to choose lhe desrrect option Press [A V] to choose "Set PrlCH” and press [OK] Once operation completed. a note wrll pop up on screen And then back lo scan member Ilsl oR Press [A/V]|o choose "Dlsable PriCH“ and press [OK]. Once operation completed, a note wrll pop up on screen And then back to scan member Ilsl. to Press [Back] to back to prevrous menu Note: 0 The Prionty icon "P" appears next to the channel ln the scan lrst, to indicate the channel is a priority channel You can have ONLY one prionty channel in a scan list 0 lfthe prronty channel ls to be dlsabled. then the lcon "P" will be disappear 5 Delete scan list member-l members lla channel keeps no actrvrtres or no slgnals (called "Useless”channel) dunng scan. you can delete rt temporarily from the scan lrst Procedure: l Press [MENU] to access the menu. 2 Press [A/V] lo choose "Scan" and lhen press [OK] 3 Scan subrmenu options listed on screen A Press [A/V] to choose "Scan Lrst" and then press [OK] 5 Scan lrst items dlsplayed on screen 6 Press [A/V] to choose desrred scan lrsl. one then press [OK]. 7 All channel Numbers or names on the scan Ilsl Will be displayed on screen. a Press [A/V] to choose desrred channel number or name. and press [OK] 9 Scan subrmenu optrons Ilsled on screen. to Press [A/V] lo choose "Delete” and press [OK] ll. Once operation completed, a note will pop up on screen tz And then back to scan list la. Press [Back] to back to prevlous menu. Note 0 ltyou wrsh to contmue to delete other "Useless" channel, please repeat lhe above procedures lrom a to tz View the setting of menu function and operation 0 it channel numbers or names to be deleted it will exit the scan list When you start scan, you Will not scan them again unless you add them to the scan lisl again I To preset scan via programming software You, Your dealer or system administrator can program the talkback modes or transmitting types during scanning vra programming software. 'Ta|kback and tnnsmitting types Your radio will stay on an active channel or group talk during scan, the time period when radio stays on the channel or group talk is called "idle time" @ You can preset the talkback and transmitting types yia software n Tallrback Q). llsottware presets it ON. when a carrier signal on the scan list is received during scan. and disappear in 3s later. Press [P'I'I'] button to reply the current channel member scanned ®. ll software presets it OFFi you can set the transmitting reply made through [Scan transmitting mode]. Note: 0 Options: ONIOFF 0 Delault ON n Sean tnnsmitting mode Q). Start channel 7 To reply call before scan initiated 12) Last active channel 7 To reply call on last prevluus active channel ® Appointed channel 7 To appoint a channel to reply call . Appointed channel it to choose appointed channel lor reply. when your radio receives a carrier signal scanned on a scan list during scanning and when the signal disappears. press [PTT] to reply the call on that appointed channel 64 General guide for fault handling Malfunction Analysis of causes Handling method Fall to turn ON radio Battery is installed incorrectly Re—Install battery Battery power lower than preset value Please change or charge battery. Bad battery contacts or contacts in oirty. Check and Clear the battery Contacts. The sound get lower or unclear or interrupted during receiving signal Battery power get lower Please change or charge battery. Volume control at low value. Aoyust the volume to be higher. Antenna gets loose or antenna lrequency is incorrect Power off radio. and reinstall antenna. or change antenna With right lreouency. Speaker is blocked or damaged Try to clear the outer speaker or contact your dealer. Using the radlo unoer poor working environment or electromagnetic intertererioe Change working environment or shilt antenna oirection Fail to talk with group members The current working channel frequency or signaling setting is diflerent With other group members Change channel or reset signaling to be same as other group memoers The setting of Digital or analogue channel is incorrect. Reprogram the current digital or analogue channel. Far away with that group members Get closer to that group members. Pops up other communication or noise on the current channel. To be Interfered by Dlher members To change lrequency or channel Did not program With relevant signaling To program signaling for the group member to prevent same frequency interference. Louder noise during communication The communlcallun distance is loo far between members. Get Closer to other members To be blocked by high builoing, or he onlower langform or basement etc working environment. Go tor open air area, and turn on radio again tor a try General guide for fault handling Malluncfion Analysis of causes Handling method Louder noise during commumcatwon To be mterfered strongly by exlemal environment or uthers Try to Keep away With instruments or equipments wmen may cause mlerference. cps mm In posllwomng (Optional) Radm wilhout eps fealure, Or ls workmg under poor workmg enwmnment lhatiails to receive GPS Slgnal. To add GPS lealures or move to work m the open air. Note: ll the above methods fat to solve your problem, or you confrcnl olher dwlferenl malfunctions, please conlacl your local dealer or appointed maintenance statmn for more supports 65 66 Maintenance and Clean Ta make sure lhe radio's best performance and pralcng ils worklng lile please be acquainled Wlth the lollcunng wnlenls‘ so that you can do well malntenance and clean lor lne radlo. Maintenance @ Please do not scratch or puncture the device with hard mailer @ Please do not place the devlce under lhe environment which can corrode electronlc circuit or under sun direct radiatlon @ Please do not carry the device by handlng lts antenna or headseL @ Please make sure the SP-MIC be covered well lf ii is not In use Clean Please clean your devlce regularly by uslng dry laid labnc or suft brush Io wlpe the dust an surlace and charger ccntacls. The keypads, conlrul knob and houslng case uflhe device are easy get dirty. Please use nonwoven wipes to clean them. Please do not use chemical to clean lt such as detergent alcohol, spray or petroleum products or the devlce surlace or prlming character rnaybe damaged Before power on the radic‘ please make sure lhe devlce is dry cempletely Standard accessories WUI AC Adaptor Charger anow Battery (2000mAh) Antenna Belt Clip Twe 67 68 Optional accessories Av condult earphone u lon Battery (ZGUOmAh) Earphone—1 213 Power supply for car charger Earphone—2 Programmable cable Speaker mmmphone Mulhrcharger Kydera® PROFESSIONAL DIGITAL TWO-WAY RADIO
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Encryption : Standard V4.4 (128-bit) User Access : Print, Extract, Print high-res Author : XM156 Create Date : 2016:07:08 10:49:03+08:00 Modify Date : 2016:07:07 14:39:42-07:00 Has XFA : No XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Metadata Date : 2016:07:07 14:39:42-07:00 Creator Tool : PScript5.dll Version 5.2.2 Format : application/pdf Title : DM 850说明书 英文 20160616.pdf Creator : XM156 Document ID : uuid:d88aa2d6-7689-4675-8dd6-aa669461e47d Instance ID : uuid:4fed6e83-707f-4d51-8404-4e4f0e1c7b70 Producer : Acrobat Distiller 9.0.0 (Windows) Page Count : 18EXIF Metadata provided by EXIF.tools