FUJIAN NEW CENTURY COMMUNICATIONS DM-850 DMR TWO WAY RADIO User Manual Part 1
QUANZHOU CITY NEW CENTURY COMMUNICATION ELECTRONICS CO.,LTD. DMR TWO WAY RADIO Part 1
Contents
- 1. User Manual Part 1
- 2. User Manual Part 2
- 3. User Manual Part 3
User Manual Part 1
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3055375 |
| Application ID | 2mwTqInmuVvwKvVu0Fo2CA== |
| Document Description | User Manual Part 1 |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 484.33kB (6054185 bits) |
| Date Submitted | 2016-07-07 00:00:00 |
| Date Available | 2016-07-07 00:00:00 |
| Creation Date | 2017-12-09 18:35:36 |
| Producing Software | GPL Ghostscript 9.18 |
| Document Lastmod | 2017-12-09 18:35:36 |
| Document Title | DM 850说明书 英文 20160616.pdf |
| Document Creator | PScript5.dll Version 5.2.2 |
| Document Author: | XM156 |
Kydera®
PROFESSIONAL DIGITAL Two—WAV RADIO
DIM-850 User Manual
T0 USER
Thank you for purchasing the digital / analog two way radios
designed and produced by Quanzhou City New Cenlury
Communication Electronic Cm. Ltd. This product is developed
elaborately as a regular digital handheld radio according to
EU standard and advanced international technology. The
radio is endowed With ergonomic design and comprehensive
function to deliver an advanced communication solution, which
can detinitively oring you a whole new operation and digital
communication experlence. improve youfwork efficiency and
convenience, and provide a reliable safeguard tor emergent
communlcallon.
Our serial products are tested strictly oy rigorous testing
procedures With advance international instruments and
equipments
Warm warning To derive optimum performance from your
radial. please read this manual and the supplied Safety
lntormation Booklel carefully before use
FCC Statement
This equipment has oeen tested and tound to comply With the
limits for part so of FCC Rules.
These limits are designed to provide reasonable
protection against harmtul interference in a residential
installation This equipment generates and can radiate radio
frequency energy and. if not installed and used in accordance
With the instructions, may cause harmful interterence to radio
communications. However. there is no guarantee that
interference will not occur in a particular installation. if this
equipment does cause harmful interference to radio or television
reception. which can be determined by turning the equipment
off and on. the user is encouraged to try to correct
The interference by one or more of the followrng measures
- Reorient or relocate the receiving antenna increase the
separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
. Consult the dealer or an experienced radio/TV technician
for help Operation is suoiect to the tollowmg two conditions
t. This device may not cause harmful interference, and 2.
This device must accept any interference received, including
interterence that may cause undesired operation
Note: “Changes or moditications to this unit not expressly
approved by the party responsiole for compliance could void
the users authority to operate the equipment "
Attention:
This radio complies With IEEE and ICNIRP exposure limits
for occupational/controlled RF exposure environment at
operating duty tactors of up to 50% and is authorized by the
FCC for occupational use only.
Compliance with RF Exposure Standards
The radio complies with the iollowing RF energy exposure
standards and guidelines
- United States Federal Communications Commission, Guide
or Federal Reguiatlnns, 47 cm at 1307, 1 13m and 21093
- American National Slandards institute (ANSl) / institute of
Electrical and Electronic Engineers (lEEE) c95 i 2005.
Canada RSS102 issue 5 March 2015
- institute of Electrical and Electronic Engineers (lEEE)
c951 2005 Edition
RF Exposure Compliance and Control Guidelines
and Operating Instructions
To control your exposure and ensure compliance with the
occupational/controlled environment exposure limits always
adhere to the following procedures
Guidelines:
- Do not remove the RF Exposure Label from the device
a User awareness instructions should accompany device
when translerred to other users.
a Do not use this device it the operational requirements
described herein are not met.
Operating instructions
- Transmit no more than the rated duty lactor or 50% of the
time. To transmit (talk). push the PushrTorTaIK (PTT) button.
To receive calls. release the PTT button. Transmitting 50 %
oi the time, or less, is important because this radio generates
measurable RF energy exposure only when transmitting (in
terms or measuring tor standards compliance)
0 Hold the radio in a vertical position in iront of race With the
microphone (and the other pans or the radio, including the
antenna) at least one inch (2.5 cm) away from the nose Keeping
the radio al the proper distance is important because RF
exposures decrease with distance lrorn the antenna Anien na
should be Kept away irom eyes.
. when worn on the body, always place the radio in a approved
clip, holder, holster, case, or body harness forthis product
Using approved body—worn accessories is important because
the use oicur‘s or other manufacturers non—approved
accessories may result in exposure levels, which exceed the
FCC‘s occupational/controlled environment RF exposure limits
- it you are not using a bodyrwom accessory and are not
using the radio in the intended use position in lront of the lace,
then ensure the antenna and the radio are kept at least
2 5 cm (one inch) from the body when transmitting. Keeping
the radio at the proper distance is important because RF
exposures decrease wrth increasing distance lrom the antenna
. Use only manulacturer's name approved supplied or
replacement antennas, batteriesand accessories Use or non
manulacturer-name approved anlennas, batteries, and
accessories may exceed the FCC RF exposure guidelines
Getting Slanted :
Before you use this user manual, please review the lolloWing
information carefully
0 How to use this user manual
0 What information 0151 your dealer / System Administralor
can inform you
How to use this user manual
This manual introduces the basic operation of Kydera
compatible DMR/Analog handheld transceiver
However. your dealer or systern administrator may already
preset features of this radio based on your working type and
requirement Please consult Wllh your dealer or system
administrator about the delails.
For your convenience and easy farniliar With this radio. the
icons below are used fordistinguishing operable and available
features for analog mode and digital mode
0 This icon indicates the function is only available in Analog
mode
Oihis icon indicates the function is only available in Digital
mode
i-iln any operating screen, you can press this button to
return back 10 Home Screen.
Note: There is no speClal icon shown forleatures Ihal workable
in both Analog and Digital mode.
You can check with your dealer or system administrator for
the toiiowing:
0 is your radio With default settings or any preset channels
that the distributor usually set?
0 Which buttons are have been designed to operate other
features?
0 What optional accessories can be used with your radio?
Preparation for operating the radio
Please assemble your radio by ioliowing steps
1) The battery pack is not charged at the factory, charge it
firstly before use
2) Check the charger indicator, when charging is completed,
the indicator lights up solid green
3) install the battery to the radio
4) install the antenna
5) install the belt clip
5) install the general interface cover (dust cover)
7) Switch the radio power ON and ad)ust the volume
Charging the battery pack
Please use charger, adaptor and battery pack supplied only
by us The charger can indicate the charging status
Charging diagram
,, a—(i)
.-@ ~©
(2)—> ®
Charging steps
1 Plug the AC adaptor into an AC outlet, like arrow (1)
2 Plug the AC adapter cable into the adapterjack located
on the back of the charger, like arrow(2)
3 Place the battery pack or the radio with a battery pack into
the charger. iike arrow (3)
4 The indicator lights up solid red and charging starts. When
charging is completed. the indicator lights up solid green.
Then remove the battery pack or the radio trorn the charger.
Note For optimum battery lite and periormance. charge the
battery pack or the radio (With a battery pack) at least 12
hours before initiai use.
Charging indicators
LED indicator Current state Description
Flashes red and then or? Eiectrity but on standby Nueload
Lights Red charging insert battery
tights Green Fully charged charging completed
Flashes Red Failure For maintenances
Note:
‘l. it is normal ii the charger LED flashes red for a short time
when the charger is iust connected.
2 If a second battery is replaced to charge. please wait until
the current battery is fully charged (lights green).itthe charger
indicator flashes red during charging:
(1) Please check iithe battery pack is well connected With
the charger.
(2) The battery pack is damaged ortaiied
(3) The surrounding temperature is too high or too low.
A Note: Please read the "Battery Safety lntormation" betore
useing the charger
installing the battery pack
1 Align the battery pack to the battery slot like diagram 1
2 Sliding the battery pack to the battery siot till the battery
lock to the right place like diagram 2
To remove the battery. turn ott the radio firstly. Then slide the
battery latch upwards to unlock the battery. like diagram 3.
Install the general interface cover (dust cover)
1 Remove two screws (as per diagram 1). then open the lack
stopper.
2 Plug the accessory into according yack ot the radio as per
diagram()). and then press it lightly tor well contact.
3 To remove the accessory by plugging it out as per
diagramifi,‘ direction.
ta
Reminder: it the installation can't be use. please check it the
accessory is appropriate or installed incorrect
Installing the antenna
Turn 0" the radio. holding the base 01 antenna. and (hen
screw it into the connecmr on the (op 07 transceiver and turn
clockwise until secure.
To remove the antenna, turn a" the radio firstlyr and rotate
it anticlockwlse
Installing the belt clip
Allgn the belt Cllp to the two screw holes on the back 0! the
raolo‘ and then tighten the screws by uslhg speeral screw
drlver.
To remove the belt Cllp, unscrew the screws.
Turning the radio ON
Turn the ON / OFF/ Volume Control Knob clockwise untll a
Cllck Sound ls heard Then you hear a Confirmatlon sound and
a welcome Image is shown on the radlo dlsplay.
Note: There is no souho lf the raoio prompt tones or alerttohe
is disabled is lithe raoio is hot power on, please check the
battery firstly to make sure lt ls ihstalleo properly lithe radio
is stlll not power on, please contact your dealer.
To turn oflthe radlo, rotate antlclockwise the volume control
trll a cllck sound is hearo. The dlsplay le show power OFF
message or a prompt tone will be heard.
Adjusting the volume
Rotate olockwrse the volume control to Increase the volume
alter power on The Volume lhoreasmg Progress Bar will
appear oh the dlsplay slmultaheously
QT.“
Rotate antlc‘ockwlse the vctume Control to decrease the
i»
volume The Volume lhoreasmg Progress Barwrll appear on
the display slmultaheously
'-1
—
4;
b)
Content ( I )
Knowing more about me mlio eonbols sening
Please review the following sub-directory firmly:
Radio ounlrols
Programmable keys
Acoess to lealures presel
Use me keyboard
Push To Talk (Pi-r) Button
Switching between Analog and digital mode
Swllchirlg between Radio eralus indicators
lcons on LCD dlsplay
LED indicalor
mmmms‘s‘mmm
Radio Controls Introduction
l Radio Contmls
07 4g
37‘; I e—__.,—g' 7 a
elf 4.1» 7
97
4a
Parts description:
N0 Part Name NO. Part Name NO. Part Name
1 P'I'I' key( Transmit key) a speaker 15 $121ch mnnecmr
2 5m (Side key 1) 9 Numene Keypad 15 Back key
3 sxz (Side key 2) 10 Dwgwtal / Analog (LED) Indwcalor 17 Programmeewe key (P2)
4 Antenna 11 Lamp 18 Down key
5 LCD dwsplay 12 Power swwtch/ Vomme ccntm‘ 19 Battery latch
5 OK / Menu key 13 Up key 20 89K chp
7 ngrammame key (P1) 14 MIC 21 u-uon battery pack
Note Bulmns er [5m IP"] are programmabwe keys
Radio Controls Introduction
I ngrammable keys
You dealers can preset the programmable keys based on
the length of a button press
Pre-setllng can be shortculs oi radio lunctluns
0 Short press — Pressing and Releasing quickly
(programmaole range is from 50ms-750ms)
0 Long press 7 pressing and holding for programmed
Iength(pmgfammable range is from SDOms'SODOms)
Note: The programmable duration fora key press can be used
for all radio functions / utility functions or setting. except
Emergency Call feature
El Radios functions can be preset by programmable
keys
1 Radio activation 37 it is allowed to enabled a target
radio remotely
2 Radio inspections — determine whether a system radio
is activated or not
3 Radio kill 07 it is allowed to kill a target radio
4 Remote monitor — switch on the microphone of a target
radio but Without any indicators
5 Monitoro— Always monitor the selected channels7
communication till this function being disabled
5 Encryption ON/OFFO— turn ON /OFF encryption feature
7 Emergency mode ON 7 start an emergency alarm or call
8 Emergency mode OFF 7 cancel an emergency alarm or call
9 Zone sWitch 7 change the current working zone (allowed
to select from a zone list)
10. Scan ON/OFF 7 turn ON lOFF scanning feature
it Contacts list —direct access to the Contacts list
i2 Voice Operating Transmission (vo><) ON IOFF 7 swuch
between vox feature ON and eff
is Man down alarm ON (OFF 7 sWitcn between man down
alarm automatically feature ON and OFF (Optional)
El Omer settings and utility funcfions can be pre-set
by programmable keys
‘l Backlight ON /0FF 7 turn display backlight ON or OFF
2 Keypad lock—witch keypad between locked and unlocked
3 souelch level adjustment 7 select the proper souelch level
for receiving.
4 High/Low power selection — switch transmit power level
between high and low
I Access to features preset
You can access to the different radio features through one
of the following ways:
. snort pressing or long pressing related preset keys
OR
- Using the following menu button [MENU 1:
‘l For accessing to Menu list. press [MENU ] key, then press
[up 1 or [ DOWN 1 key to access the menu features
2 Press [ MENU ] key to select the needed feature or enter
Radio Controls Introduction
inlo the needed submenu
3 Press [BACK] key or [-]m return to the previous Menu
or screen
Note: IHhe radio ts trtaclivily alter a period ofltme. Ihe radio
witt not automaticatty exil the menu and writ stays rn operation
screen
I Use me keyboard
You can input user atras. to or wrrte a message thru the
keyboard. Many characters require presstrtg one button several
trrnes to gel. The iottowrng iorm shows the pressrng times to
get a certarn character by pressrng one button.
Pressrng times
e e tnt‘tztstttfitot‘rtuw nzt 2 women an e
tezlu/ .»ttw
Cozxxmmr
<170r—wtn
xvz
Note rn Nurneereortrng nreoe. shen press tnrs outten to enter numhcr o
nrte rn unreer. Engitsh ano crrrneee eortrne mooe. tong press inrs human
toenter - symoot.
Note tn Number. Engtrsn ano cnrnese eortrno mooe. snort Dress tnrs button
to enter symbot and tong press rt to enter space
I iiiiiiiiil
eaves“,
Nels rnuuneer anitshsrdChtnespedttnghwr 37'0?‘anSSthtshtilnMQENW'rr"
Ill ayrrtbflid'td iurtg er-s. lbs-inch ember Nurt bur kngt st 4111 c rrnmrtarnyrrrroor-rne
mane (‘AE‘CaMxt teneis ‘ab'Lmteruase Mien '12'Nurrrb=ts ano vwcnrnm Ptnytvt‘i
I PTT button
There are two basrc functions on PTT 1 button: Transmrttrng
and Recetvtng.
0 Press [ PTT] button to transmit the srgnats to other radtos
0 Retease [ PTT] button to recerye signals irom other radius
0 tithe tntiivitiuat /Gmup Catt or Prompt Tones is aotrvateo.
the PTT Sidetone writ be heard when you press or reteaser
PTT 1 buttono
0 tithe tndrviouat r Group Catt or Prompt Tone is activated,
you thI hear the PTT stoetone when your raoro is recerving
or oommunrcation is ltntshed.e
Note: You can use programmrng software to turn oii att radio
atert tones and prompt tones or rust oisabteo partrat raoro atert
tones ano prompt toneo
Radio Controls Introduction
I Switching between Digital and Analog mode
For your convenience, each channel can be prcgraninied as
either analog channel or digital channel
u < Mini. r. < . do .
iii.ii.i ii A was it in
rsi v M
u u
— _
0 in standby mode, press [ Digital 1 Analog 1 button lcr at
least 3 seconds. the current channel will be switched between
Analog and Digilal mode.
0 If the radio is switched from Digital to Analog. some ieatures
maybe unavailable. where digital leature (lor example SMS)
icons will be hidden in ihe rnenu lisi
0 There is also shared leature list lortunctions being available
both in Digital and Analog mode
Note: During scanning. the radio also can switches oetween
Analog and Digital mode, but scanning mode Will be disabled.
I Radio status indicators
The below icons appears on LCD display. also appears in
Contact Iisl indicating iD type
0 indiVidual call: 7p?
indicates an iridiViduai call is starling. in contact list, it indicates
alias name. ID No. encode etc
0 Group call 79}
indicates a group call is starting in oontact list it indicaies
alias name. ID No. encode etc
0 General call 7.3
indicates a General call is siarting ln contaci list it indicaies
alias name. ID No. encode etc
I Icons on LCD display
The liquid crystal display (LCD) oime radio shows radio status
character inpui and Menu items
The iollowmg icons are appears on LCD display
0 Receiving signals (RSSI)
T indicates no signal is received
Tom The Number oi signal strength bars indicates the signal
strength clycur radio Five bars indicate the strongest signal
This icon is only appeared in receiving.
0 Monitor
L indicates it is monitoring the selected channel
0 Power level
"L” means the radio is set al low power
"H"means the radio is set at high power
0 Ringing tones are disabled.
(ixTones are lumed oil.
0 vox
i- Appears when vox is activated
Radio Controls Introduction
0 eps avaiiablee
w'rhis icon appears when GPS is activated for locating
There is no icon appearing, if cps is not available or out of
range or not receiving data lrom satellite when cps is enabled
0 Scan
3 indicates Scanning is started
0 Priority scan
”P" in scanning list, channels with'
re set as priority scan
channels
0 Unread smse
8 indicates there is unread SMS in lnbox
a indicates the lnbox is lull
0 Emergency alarm
mi indicates the radio is in emergency mode
0 Salelyg
g indicales communicalion encryption is activated
0 Battery pack
D a n i | The number of cars indicates the remaining
battery level
0 CTcsso
”QT” means CTCSS is acllvaled
- in standby mode "QT" appearing means CTCSS is available
in receiinng
~ in transmitting, ”QT” appearing means CTCSS is available
in lransmitting
0 Guess 0
"DOT” means DCS is activated
- ln slandby mode, "DQT" appearing means DCS is availaple
in receiving
- in transmitting, “DOT” appearing means DCS is available
in transmitting
l LED Indicator
The LED Indicalur indicates the working slalus oi the radio
. Lighting Red 7 radio is transmitting.
0 Light Green — radio is receiying
. Flashing red light 7 the battery is in low power
Note:
3) in analog mode‘ when the LED indicator flashes or lights
green, it indicates the radio detects the active signal overlhe
air.
12) llthe busy channel lockout function is turned on, the radio
will refuse to transmit signal when you press the [ PTT 1 key
10
Content (II)
Afierybu undersmnd how your radio is configured, you am
able in use it more denly.Uae this directory in familiar with
me basic call lealure:
Choose a Zone
Choosea Channel User in, Gmup ID
Receive and Answera Call
initiate a Call
Usmg the UP & Down key lo Initiate a Call
Initiate a Group Call
initiate a Privale Call
Initiate a General Call
Monitor
11
11
11
13
14
14
14
15
we
iating and Receiving Calls
I Choose a Zone
A zone ls a group ol channels Your radio supporls up to la
zones, With a maximum ol ‘lE orgrtal channels and 1s analogue
channels per zone.
Choose a working zone by follcwrng steps:
Procedure
1 Press lhe preset "Zone Switch" key to swrtch in zones
OR
2 Follow the steps below
(1) Press the [ Menu ]key to access the main menu.
CZ) Use [A/V ] key to choose [Settrng], and press "OK" to
access the subsmenu.
13) Use [ A/V 1 key to choose "Zone” in sub-menu, and press
"OK“ to access zone list (146 Zones)
@ Use [A/V ] key to choose a deslred zone ln zone list and
press "OK" to confirm Now you can see "Zone Settled" on
the display
(5) Allerthe radio returns to the home screen, the Zone No
displays at the bottom of the screen.
Note:
The No. and names showing in Zone list need to be preset
by your dealer or System Admrnrslrator (The maxlmum No
is 16 zones)
I Choose a Channel, User ID, or Group ID
Ailer chousmg lhe deSlred zone ( pmvlded that there ls multiple
zones preset in the radlu), choose a working channel, user
alias or ID, or Group allas or H: wlth the channel selector
Prompt:
0 When choosmg a channel, you can see the rnrorrnalron or
current channel ls dlsplayed on the screen, such as channel
name, channel number, lreouency, ID, etc (ii depends on
the preset lniurmaticn ano dlsplay mode the user choose)
0 You can change current working channel mooe by pressing
[Analog / Digital 1 key (Analog / Dlgltal Mode)
I Receiving and Answering in a Radio Call
in the current channel, you can receive or answer the call
from user(s) with the same user lb or group D. in transmrttrng,
the LED lndlcator lrghts reo, whrle in recelvlng. it lrghts green
(Provlded that LED lndlcatcr is turned on).
<— LED lndicator
11
12
iating and Receiving Calls
Note: ero deoode an encrypted call your radlo musl have
same encryption key, or same Key Value AND Key lD (preset
by your dealer) as tne transmrttlng radro. ( Tne enoryplron can
be preset by your dealer oryourselr)
Please rerer to Encrypfiorr on Page 42 ror more delalled
information.
Receiving and Answering to a Group Call 0
To recelve a group call, your radio must be programmed as
part ortnat group
Procedure:
When receiving a group cell (the Group Call icon displays on
screen),
1) LED lights up green (ii the LED indicator ls turned on).
2) The llrst line shows the Caller alias or ID( and the second
hne shows Group Call roon (only appears ln dlgltal mode)
3) To answer/reply hold the radlo vertically 2.5cm to 5cm(1
to 2 lnones) rrom your mouth
4) 0 If the "RX Begln Tone" feature for group call is enabled
you wlII hear a snorl tone when the transmrtlrng radio press
the [ PTT 1 Key means your radio is ln recelvlng
5) a it the "Rx End Tune" leature ror group call is enabled.
you will neara snort tone when he transmltlrng radlo release
the [ PTT] Key. means your radio is free to response, at tnls
moment you can press the [ PTT 1 Key and speak clearly lnto
lne mlcrupnone to answer the call
5) e If the "Tx Begin Tone" lealure lor group call ls enabled
you wlll hear a snorl lone when you press the ( P'I'I'] Key,
inen you can speak clearly into lhe mieropnone
7) e If the ”Tx End Tone" feature lor group oall ls enabled,
you wlll hear a snorl lone when you release the [ PTT] Key,
means you are avallaole for receiving
Please refer to rn'm'aae a Group Call on Page m for more
detalled information
Receiving and Answering to a Private Call 0
A private call relers to a call lrcm an lndividual radlo to another
individual radio There are two klnds of Private Call far selection
1 Make radio remote delecllun to make sure the recelver
radlc ls existed
2 Ready (0 Inltlaie a call.
Procedure:
wnen recelvlng a private call (the Prlvate Call loon displays
on screen):
1) LED lights up green (iHhe LED indicator ls turned on)
2) The llrsl line shows lhe caller alias Or ID‘ and lhe second
llne snows Group Call loon (only appears ln dlgltal mode).
a) To answer/reply hold the radlo vertloally 2.5cm to 5pm (‘l
to 2 lncnes) lrorn your mouth
4) a ll (he "Rx Begln Tone" feature for prlvate call is enabled
you wlII hear a short tone when the transmitting radio press
the [P'I'I'] Key, means your radio ls in receiving
iating and Receiving Calls
5) a ii the ”Rx End Tune" ieature for private call is enaoled,
you will heara short tone when the transmitting radio release
the [P'I'I'] Key, means your radio is free to response, at this
moment, you can press the [P'I'I'] Key and speak clearly
into the microphone to answerthe call
5) e If the "Tx Begin Tone" feature for private call is enabled,
you win hear a short tone when you press the [PTT 1 Key,
then you can speak clearly into the microphone
7) e if the "Tx End Tone" feature tor private call is enaoled,
you will hear a short tone when you release the [P'I'I'] Key,
means you are available for reoeiving
Please refer to initiate a Private Gallon Page 14 for more
detailed information
Receiving and Answering a General Call
A general call is a call irom an indivtdual radio to all radios
in the same channel.
Procedure:
When receiving a general call (the General Call ioon displays
on screen):
1) LED lights up green (it the LED indicator is turned on).
2) The iirst line shows the caller alias or ID, and the seoond
line shows Group Call ioon (only appears in digital mode)
3) To answer/reply, hold the radio vertically 2.5om to 50m (‘i
to 2 inches) irom your mouth
4) e lithe "Rx Begin Tone" feature for general call is enabled,
you win hear a short tone when the transmitting radio press
the [ PTT] Key, means your radio is in receiving.
5) a lithe "Rx End Tone" ieature tor general call is enabled,
you will heara short tone when the transmitting radio release
the [ P'I'I'] Key. means your radio is free to response, at this
moment, you can press the l PTT ] Key and speak clearly into
the microphone to answer the call.
5) e If the ”Tx Begin Tone” feature iorgeneral call is enabled,
you Will hear a short tone when you press the l P'I'I'] Key.
then you can speak clearly into the microphone.
7) a it the "Tx End Tone" feature forgeneral call is enabled,
you win hear a short tone when you release the [ PTT] Key,
means you are available for reoeiving. .
Please refer to initiate a General Call on Page is for more
detailed information.
Note:
1 it you sWitch to another channel while reoeiving the General
Call. the radio Will stop receiinng that general call.
2 During a General Call, you are notable to use any pie—
programmed key until the call ends
I Initiate a Radio Call
You can choose a channel, user lD, orgroup alias oyfollowmg
instructions:
1 Use [A/V ] key
2 0 choose irom the Contacts Iisl thru Menu or Preset
13
14
iating and Receiving Calls
bunons
3 a Manual Dial the user in in the "Contacts" this is only
available in private call
Note: Your radio can only transmit voice With encryption only
when the ”Encryption" feature is turned on Your target radio
must have the same encryption key OR the same Key Value
and Key ID with your radio to decode the transmission
Please refer to Encryption on Page 42 for more detailed
information
I Using the UP 5 Down keyto Initiate a call
El Inl taking a Group Call
To initiate a group call, your radio must be programmed as
part of that group
Prooedure:
1. Rotate the [ A/V] key to choose the channel With preset
group alias or lD.
2 Hold the radio vertically 2 Sent to 5omt1 to 2 inches) from
your mouth.
3 Press the [ PTT ] key to initiate a call, the LED indicator
lights up solid red, the group call ioon Will appear on the
display, also the group alias or D will be shown on the display.
4 Release the [ PTT ] key and listen to the response, when
the target radio answers, the LED indicator lights up solid
green. Then you see the display appears the group call icon.
the group alias or ID, and transmitting radio alias or lD
5 if the "Tx Ended Tune" is enabled, you will hear a short
tone when the transmitting radio is releases the [ PTT] key,
means the channel is free foryou to answer At this moment,
you can press the [ P'I'I'] key and speak clearly into the
microphone to answer the call
Note:
You also can initiate a group call through Contacts (Please
refer to initiating a Group Call on Page 14 for more detailed
information )
g Initiating a Primte Call
To initiate a private call, your radio must be programmed as
part ollhat private alias or ID
Procedure:
1 Route the [A/V ] key to choose the channel with preset
private alias or D
2 Hold the radio vertically 2.5om to 5cm(‘l to 2 inches) lrorn
your mouth.
3 Press the [ PTT ] key to initiate a call, the LED indicator
lights up solid red. the private call icon Will appear on the
display, also the caller alias or lD Will be shown on the display
4 Release the [ PTT] key and listen to the response, when
the target radio answers, the LED indicator lights up solid
green. Then you see the display appears the private call icon,
the caller alias or ID eto
iating and Receiving Calls
5 it the ”Tx Ended Tune" is enabled, you win hear a short
tone when the transmitting radio is releases the 1 PTT 1 key.
means the channel is free foryou to answer. At this moment.
you can press the [ P'I'I'] key and speak clearly into the
microphone to answer the call.
Note:
You also can initiate a private call through Contacts. (Please
relerto initiating a private Call on Page 14 for more detailed
information.)
El Initiating a General Call
This leature allows you to transmit a call to all radios on the
same channel Your radios must be programmed to allow to
use this feature
Procedure:
1 Rotate the [A/V 1 key to choose the channel with preset
general alias or ID
2 Hold the radio vertically 25cm to 5cm (1 to 2 inches) lrom
your mouth
3 Press the 1 PTT 1 key to initiate a call, the LED indicator
lights up solid red. the general call icon will appear on the
display. also the caller alias or ID Will be shown on the display
4 Release the [ PTT] key and listen to the response. when
the target radio answers. the LED indicator lights up solid
green. Then you see the display appears the general call icon.
the caller alias or ID etc
5 it the "Tx Ended Tone" is enabled. you will hear a short
tone when the transmitting radio is releases the [ PTT] key.
means the channel is free roryou to answer At this moment
you can press the [ P'I'I'] key and speak clearly into the
microphone to answer the call.
Note: Users on the channel can't answer to a general call
El Initiating a Group Call or Private Call
Procedure:
1 Press the preset 1 Contacts 1 Key to initiate a private or
group call.
2 Hold the radio vertically 2 5cm to somtt to 2 lnches) trom
your mouth
3 Press the 1 PTT 1 key to initiate a call, the LED indicator
lights up solid red. the private call. caller alias or ID. and the
group call or private call icon will appear on the display
4 Wait for the "Tx Begin Tone" to linish (il enabled). and
speak clearly into the
microphone
5 Release the [ PTT] key and listen to the response. when
the target radio answers, the LED indicator lights up solid
green. Then you see the display appears the call type icon.
the caller alias or ID. and the transmitter radios alias or ID.
6 if the "Tx Ended Tone" is enabled, you will hear a short
tone when the target radio is releases the [ P'I'I' 1 key . means
the channel is free toryou to answer. At this moment. you
can press the [ PTT] key and speak clearly into the microphone
to answerthe call.
7 if there is no voice activity in the preset time. then this call
will be ended The radios will be back to main menu
15
16
iating and Receiving Calls
I Manual dial in initiate a private call
Procedure:
1 Press preprogrammed "Contacts" key, and press [A v
1 key to select sup menu—Manual dial.
2 Press "OK" key to enter Manual dial interraoe
3 input in numbers directly.
4 Hold the radio vertically z 5cm to 5crn(t to 2 inches) from
your mouth.
5 Press the 1 PTT 1 key to initiate a call the LED indlcalur
lights up solid red. the private call alias or ID. and the private
call icon will appear on the display
5 Wait lor the "Tx Begin Torte" to limsh (ii enatiled). and
speak clearly into the microphone
7 Release the [ PTT1 key and listen to the response, when
the target radio answers, the LED indicator lights up solid
green. Then you see the display appears the private call icon.
the caller in or users in
e If the "Tx Ended Tone" is enabled, you Will hear a short tone
when the target radio is releases the 1 P'IT] key. means the
channel is tree for you to answer. At this moment. you canpress
the 1 PTT 1 key and speak clearly into the microphone to
answer the call Or irthere is no voice activity in the preset
time, then this call Will be ended
9 When the call is end. press ' Delete" key or press the [-
1 key to returns to the Home Screen.
I Talk Around
You can continueto communicate oy using talk around leature
when the repeater is not operating. or when two way radio
is out olthe repeaters range but Within the talking range oi
other radios This is known as "Talk Around”
Procedure:
1 Press preprogrammed "Talk Around" key to swrtching
between talk around and repeater mode.
Note: When your radio works in talk around mode, the talk
around icon " I-‘I " wlII appear on the display.
I Monitoring features
El Monitor Momentary (Moniloring a channel)
Use the morllior feature to make sure a channel is free before
transmitting
Procedure:
1 Press and hold the preset [analog monitor] key and listen
to the activrty.
2 The LED indicator lights up solid green (ll LED indicator
is enabled)
3 When you hear (he aciivliy of radio or "whlte notse"(the
channel is tree), press 1 P'IT] to talk and release PTT to listen
[I Permanent Monitor
Use permanent monitor feature to continuously monitor a
Channei.
Procedure:
1. Press the preset[ permanent rnonitor1 key and listen to actrvrty
2 The LED indicator lights up solid green
3 When you hear the activrty of radio or "white nolse"(the
channel is free), press [P111 to talk and release [Pi-n to listen
Content (I I)
To know more deiails advanced fundions through this
inn-ounces:
CaHing Duration
Remute Monitor Duralion
Remote Monilar
Radio Kming
Radm Check
Radio Revive
CaH Men
Encrypmn Level
18
18
18
18
18
18
18
19
17
18
Advanced Functions ( pro-programmed by programming software)
QDMR Senrice
For more information on turn on or olflhe radios setting and
advanced functions through preprogrammed (by programming
soltvvare), please review the following details
soalling Duration
Users can preprogram the calling duration ofa radio alter
ending call by using the programming software.
(Range from 30ms to 300ms)
eRemote Monitor Duration
Users oan limil the duration of the radio lhat being remote
monitor by olher users
(Range from 105 lo 1205)
eRemote Monitor
Users can turn on oroffforallowing your radio to receive and
process the remote monitor instruction from other radios
through presprcgrammed (by programming software).
This instructs indicate reeeiver radio within the range of remote
monitor to revive its own Mic st transmitter. The radio Will
initiate a call silently and not give any notice to your radio
about remote monitor.
Note:
The function is available ONLY in Digital mode.
GRadio Killing
Users can mm on or OHIO aHow the radio (0 recall/e and
process ”Radio klli" instruction from another radio, and disable
it remotely through ore-programmed (by programming
software) This function can prevent the radio is used when
it is stolen or lost
Note:
The function is available ONLY in Digital mode
a Radio Check
Users oan lurn on or off for allowrng other radios to check
whetheryour radio is active in the system with no botherto
that radio through ore-progmmmed (by programming software)
Note:
The function is available ONLY in Digital mode.
a Radio Revive
Users can turn on oroffforallowing your radio to receive and
process "Radio revive"(revlve your radio remotely) instruction
from other radio through pre-programmed (by programming
software) This function can be used when a stolen or lost
radio has been recalled
Note:
The function is available ONLY in Digital mode
Ceall Alert
Users oan lurn on or off to allow other radios use the alert
funotion to request you call back when you are available
through prespfogfammed (by programming software). Bul No
voioe oommunioalion.
Advanced Functions ( pro-programmed by programming software)
Note:
The funcllun is available ONLY lrl Digilal mode
eEricryptioh Level
This luhction can add encryplion to selecled digilal channel
The encryption is a scrambling solution based on the software,
out nol very reliable it iusl for preventing eavesdrops The
portions citransrriissioh signal and the user identilication are
not encrypted The receiver and lransmitter radio must be
preset to have lhe sarne encryption level or the same Key
Value and Key in, then can decrypl an encryption-enable call
or receive encrypted transrnitling dala You can enable or
disable the encryption function through cuslorn buttons ol
Shorl press or Long press (The Encryption ON/OFF) or
Encryption ("Eetting" rrienu) Your radio must enable
"Encryption" function on the channel or the "Encryption"
lunction of your radio lo send an encrypled transmission
signal lithe encryption luhction of Channel or your radio is
enabled lhe encryplion icon will displays on the radio with
LED
Options:
0 OFF — Turn off all encryption funclion of your radio
0 Low — Allow lo add basic encryption to selected digital
channel Fur every radio, users must choose an initialization
encryplion key lrorn preset list if the initialization encryplion
key or receiving radio and the transmitting radio is differenl,
you will hear a chaotic lransmiseion
0 Middle —Alluw to add strong encryption to selected digital
channel Every channel with encryplion ON must be connected
wilh a initialization encryplion Key value ll the Key in or the
lransrnilting radio is not malch wilh all Key ID ol the receiving
radio the receiving radio will hear nothing
0 High 7 Allow to add enhanced encryplion to selected
digital channel Every channel with encryplion ON must be
connected with a s inilialization encryption key value If the
Key ID ol the transrnitling is not match with all Key in or the
receiving radio, lhe receiving radio Wl|| hear nothing
Note:
The function is available ONLY in Digilal rnode However‘
encryption funclion or a channel or a radio is not supported
on some rnodels
19
Content (IV)
Use this directory to familiar with more function menu
.21
.21
21
21
.. .21
.21
Text Messaging.
inoox. .. . .. . .. . .. . ..
Receiving a Message
Reading a Message ..
Managing Received Message ..
Repiylng to a Received Message.
Editing toa Received Message. 2
Delete a Received Message . .23
Writing a Text Message. . .. .24
Outbox.. . .. . .. 25
Common message. 6
Ciear the Message List. . ..27
Comacts... .zs
Conlacts List . . . . . . . 28
Send message irom the Contact Lis 31
initiate a cali lrom Contact ......................... 31
"Manuai diai" to initiate a private caii. . . .. .. .. . .. 32
Advanced Services I Radio Detection/Send Radio Detection
/Cai| Aien ..... ... .. . 33
Receive or response to the cali aierl . . . .. . . 34
Emergency alarm 33
Encryption 42
Call Log... .42
Checking the latest cali activity 43
Ciear Cail Log iist
Attachment
view attaonment information.
cps (optional) .
ens ON (OFF! view Location and ens data transmission 45
Time-zone PDSltan oaltoration 45
Selfings..
Machine Propenles.
Parameter Setting
Zone Setting.
Time Setting.
Prompt Tone Setting so
Bastc information Setting 54
Restore Factory. .. .
FM Radio
Scan...
Scan ON or OFF.
Scan mode setting
Scan List
To preset scan via progmmming settmre...
General guide tor fault handling
Maintenance and Clean
Standard aooessories.
Optional aooeswies..
View the setting of menu function and operation
l Text Messaginge
Your radio can receive text message from an individual radio.
The maximum iength Di characters fora text message is 138.
Any text message in the writing/ editing screen wiiI he saved
to "outbox" automaticaily.
Note: Press l-] at any time to return to the Home screen
Inbcx
5 Receiving a Message
When your radio is receiving message, the radio wlii give a
Message Tone (it enabled) and the display will show the
message icon [a]
Cl Reading a Message
Procedure:
1 Press [ Menu 1 Key to access the menu
2 Press [A/V] key to select "Message" and press [OK] key.
3 Press [ A/v 1 key to select "inbax" and press [OK] key.
4 Press i A/V] key to choose messages, and press [OK
1 key, then open message
5 Press [ Back] key to return to the Inhox
On
Press i OK] key to access the Reply, Forward, Edit, or Delete
message menu
Press key to choose menu, then press [OK] key
(Please reter to the details operation tor Reply, Forward, Edit,
or Delete message i
5 Press [ Back] key to return to the previous menu
Note:
itthere have unread message or received new message in
the ineox, the display will show message icon [g]
El Managing Received Message
Use the inboxto manage text messages. The inbox can store
up to 30 messages. Your radio provides the lollowmg options
for text messages:
. Reply
. Fontvard
. Edit
. Delete
Note
SDrl the order at text messages in lnpox are in accordance
with the most recently received.
Tips: Long press i-] at anytime to back to the Home Screen
El Replying to a Received Message
Procedure:
1. Press [Menu] Key to access the menu.
2. Press [A/v ] key to select "Message" and press [OK]
key
3 Press [A/V ] key to select "Inbox" and press[0k 1 key
4 Press [A/V 1 key to choose messages, and press [OK
21
22
View the setting of menu function and operation
1 key, then open message
5 Press 1 OK 1 Key to access the submenu of lnbok
a Press to select "Reply" and press 1 OK] key Aflashing
cursor appear, use the keypad to write the message
Or:
Press 1 OK 1 key to access the Send, lnsen common message
or Exil Editor menu
Press 1A/V 1 key to select insert common message, and
press 1 OK 1 key A llashrng cursor appear, it need, use the
keypad to edit your message
7 After finished wntrng, press 1 OK 1 key to access the
supmenu
a Press 1 0K 1 key to select "Send" and press 1 0K] key
9 The display wrll show "MSG sending"
to lfthe message is sent successfully, the display wrll appear
”MSG sent"
0:
llthe message is failed to send, the display wrll appears
”Walling-tmecut"
11 The screen returns pack to the previous menu
Ponnarorng to a Received Message
To select the message from lnhox and send it to another
users / Group call alias or 1D
Procedure:
1 Press 1 Menu 1 Key to access the menu
2 Press 1 A V 1 key to select "Message" and press 10K1
key
3 Press 1 AN 1 key to select ”max? and press [OK] key
4 Press[A/V 1 key to choose messages, and press 1 OK
1 key, then open message .
5 Press 1 OK] Key to access the submenu ol lnbpx
5 Press 1 A/V 1 key to select "Forward" and press [OK] key
Press 1 AN 1 key to select "Search" and press 10K1 key
Press 1 A/V 1 key to choose contacts alias or lo, and press
10K1 key to send message.
On
Press key to select ”Write Numper" through keypao to input
contacts ID number. press [OK] key to send message.
7 The display wrll show "MSG sending"
a llthe message is sent successlully. the dispiay will appear
"MSG sent“
On
llthe message is lailed to send, the display wrll appears
"Waiting—timeout"
9 The screen returns back to the previous menu.
El Editing to a Received Message
You can still or mooriy the message on the lnhok behre senp
Procedure:
1 Press 1 Menu 1 Key to access the menu
View the setting of menu function and operation
2 Press [A/V] key to select "Message" and press [OK] key.
3 Press[ A/v lkey to select ”lnbox" and press [OK] key
A Press[ A/v ]key to choose messages, and press [OK]
key, then open message.
5 Press [OK] Key to access the supmenu cl mm.
6 Press [ A/V 1 Key to select ”Edlf' and press [OK] key
7 Ailashrng cursor appear, use the keypad to wrlte the
message.
Press[ A V 1 Key to move one space to the IE" or right.
press[ Delete lkey to delete any useless words pefcre the
flashing cursor
an
Press [ it] key to swltch input mode The current input method
will be shown atlhe top at the display (When it displays ”AB"
it means you are able to type capltal letters "ab" it means
you are able to lnpul lowercase letters "12" it means you are
able to type numbers from 0 to 9 "FY" it means you are able
to type Chinese wrth Pinyin method.)
3 After finished wnhng, press [OK] key
Press [ A/V 1 key to select "Search" and press [OK] key
Press [ A/V ] key to choose contacts alias or lo, and press
[OK] key to send message.
On
Press [ UV 1 key to select "Wme Number" through keypad
to lnputconlacts lD number, press [OK] key to send message
The dlsplay will show "MSG sending"
lllhe message is sent successfully, the display wlll appear
"MSG sent”
an
lllhe message is lalled to send, the display wlll appears
"Waiting—“meant"
on
Press Key to select ”Inserl common message"and press [OK]
key
Press [ A/V 1 Key to choose the Qulck Male, and press [OK]
key. A flashing cursor appear, ll need, use the keypad to edlt
the message.
On
Press [ A/V ] Key to select "Save" and press [OK] key. Then
the message will be saved to "Oulbox"
The screen returns pack to the prevrous menu.
Or:
Press [ A/v 1 Key to select "Exit Edllol”and press [OK] key
The screen returns pack to the previous menu.
D Delete a Received Message
Fmoedule:
l Press [Menu] Key to access the menu.
2 Press [A/V] key to select "Message" and press [OK] key
3 Press [A/V] key to select "lnbux" and press [OK] key
23
24
View the setting of menu function and operation
4. Press [A/V] key to choose messages, and press [OK]
key, then open message
5. Press [OK] Key to access the submenu cf lnbox
a. Press [A/V] Key to select "Delete"and press [otqkey
7. The orsplay wrll show "Confirm to delete"
Press [OK] key to delete, the orsplay wrll show "Deleted"
Or:
Press [Cancel] key to return to the prevrous menu.
a. The screen returns pack to the previous menu
Writing a Text Message
Procedure:
1 Press [Menu] Key to access the menu
2 Press [A/V] key to select "Message" and press [OK] key
3 Press [A/V] key to select "Wrrtirtg a Text Message" and
press [OK] key
4 A flashrhg cursor appear, use the keypad to write the
message
5 Press [ /V] Key to move one space to the left or right
a Press [Delete] key to delete any useless words belore the
flashan cursor
Or:
Press [at] key to swrtch rnpul mode The current rhput method
will be shown at the top cllhe orsplay (When it displays "AB"
rt means you are able to type capital letters "ah" rt means
you are aple to rnput lowercase letters "tz it means you are
able to type numbers from u to 9 "FY” rt means you are able
to type Chinese wrth Prnyin method.)
7 After finished writing, press [OK] key
3 Press [A/V] key to choose sup menu, and press [OK]key
Press [A/V] key to select ”Insert common message” and
press [OK] key.
an
Press [A/V] Key to choose the Quick Note, and press [OK]
key A trashing cursor appear, rf need, use the keypad lo edrt
the message.
on
Press [A/V] Key to select ”Save”and press [OK] key. Then
the message wrll be saved to "Outbox"
The screen returns back to the previous menu.
On
Press Key to select "Exrt Edlter" ano press [OK] key
The screen returns back to the previous menu
oh
Press [A/V] key to select "Search" and press [0K]key
Press [A/V] key to choose contacts alras or to, and press
[OK] key to send message.
on
Press [A/V] key to select "Wrrte Number" through keypad
View the setting of menu function and operation
to inputcontacts ID number, press [ OK] key to send message
The display will show "MSG sending"
it the message is sent successfully, the display will appear
"MSG sent”
an
if the message is tailed to send, the display will appears
"Waiting-limeout"
9 The screen returns back to the previous menu
Ombox
Procedure:
1. Press [Menu] Key to access the menu.
2. Press [A/V] key to select "Message" and press [OK] key.
3. Press [A/V] key to select "Outpox" and press [OK] key.
4. Press [A/V] key to choose messages, and press[OK]key.
5 A flashing cursor appear, use lhe keypad lo wrile the
message
6. Press [ /V] Key to move one space to the lelt or right.
7. Press [Delete] key to delete any useless words before the
flashing cursor
Or:
Press [rt ] key to swtlch input mode. The current input method
Will be shown at the top o! the display. (When it displays "AB"
it means you are able to type capilal letlers "ab" it means
you are ahle to input lowercase letters "iz it means you are
able to type numbers tram a to 9 "PY" it means you are able
to type Chinese with Pinyin method.)
3 Alter finished writing, press [OK] key
9 Press [A/V] key to choose sub menu, and press [Olqkey
Press key to select "insert common message" and press
[OK] key.
On
Press [A/V] Key to choose the Quick Note, and press [OK]
key. Allashing cursor appear, it need, use the keypad to edit
the message
Or:
Press [A/V] Key to select ”Save“and press [OK] key Then
the message will he saved to "outbox"
The screen returns pack to the prevtous menu.
On
Press [A/V] Key to select "Exit Editer" and press [OK] key
The screen returns pack to the previous menu
Or.
Press [A/V] key to select "Search" and press [OK] key
Press [A/V] key to choose contacts alias or in, and press
[OK] key to send message
or.
25
26
View the setting of menu function and operation
Press [A/V] key to select "Write Number" through keypad
to inputcontacts lD number, press [OK] key to send message
The display will show "MSG sending"
lithe message is sent successfully, the display will appear
“MSG sent"
or
lithe message is tailed to send, the display will appears
“Waiting-llmeaut"
imhe screen returns back to the preyious menu.
Common message
You radio can preprogram the common message through
sottware orthrough add Quick note to edit, it suppcns up to
so Quick Noted. While Quick Notes are preset. you can uiew.
edit, delete or send any predefined Quick Notes belore send
Procedure:
t Press [MENU] key to access the menu
2 Press [A/V] key to select ”Message" and press [OK] key
3. Press [A/V] key to select "Quick Notes" and press [OK] key
4 Press [A/V] key to read the current message
5 Press [OK] key again to access the sub menu
0 Display Content
Procedure
The display will show the contents of the selected Qulck Notes
Press [Back] key to return to the preyious menu.
0 Add Quick Notes
Procedure:
Enlerthe editing Quick Notes When a blinking cursor appears.
use the keypad to type message
Press [A/V] key to move one space to the left or right, and
use keypad to input text
Press [ Delete 1 key to delete any unwanted characters. and
hold [fl] key to change the input method, which Will be shown
at the top or the display.
CAB" it means you are able to type capital letters "ab“ it
means you are able to input lowercase letters. "12" it means
you are able to type numbers lrom o to 9 "FY” it means you
are able to type Chinese with Pinyin method )
Press [alqkey again to access the sub menu.
Press key to scroll down to select one ctthe followmg options
under the sub menu, and press [0K1key.
a Save quick notes save the edited notes
o Exlt Edltor return to the prevrous menu
0 Edit Quick Notes
Procedure:
View the setting of menu function and operation
The display will show the contents of the selected Qulck Notes
When a blinking cursor appears, use the keypad to type
message.
Press [A/V] key to move one space to the left or right, and
use keypad to input text
Press [Delete] key to delete any unwanted characters and
hold [it] key to change the input method. which Will be shown
at the top ot the display.
(“AB" means you are able to type capital letters "ab" means
you are able to input lowercase letters. ”12" means you are
able to type numbers trom u to 9 "FY" means you are able
to type Chinese with Pinyin method )
Press [OK] key again to access the sub menu.
Press [A/V] key to scroll down to select one or the following
options under the sub menu. and press [OK] key.
o Save quick notes save the edited notes
0 Exit Editor return to the previous menu
0 Delete Quick Notes
You can delete any unwanted quick notes
Procedure:
The display wrll show ”Confirm to delete"
Press [OK] key to delete the quick note or press [Cancel] key
to return to the previous menu.
0 Send Quick Notes
You can send any quick notes or edit any of them before
sending.
Procedure:
The display Will show the content of the selected Quick Note
Press [A/V] key to move one space to the left or right, and
use keypad to input text
Press [Delete] key to delete any unwanted characters, and
hold [a] key to change the input method. which Will be shown
at the top of the display.
(' 5" means you are able to type capital letters "ab” means
you are able to input lowercase letters. "i2" means you are
able to type numbers from 0 to 9 "FY" means you are able
to type Chinese With Pinyin method. )
Press [OK] key agaln to access the sub menu
Press [A/V] key to select the desired Contacts or ID
Or press [A/V] key to select "Manual Dial" and use keypad
to input the lD number Press [OK] to send the quick note
The display wtll show "Sending". it the quick note is sent
successfully. it will show "Sent". Otherwise, it Will show
"Failed"
6 Press [Back] key to return to the previous menu
Clear the Message List
You can clear the messages In Ihe Inbox, Oulbcx and qulck
27
28
View the setting of menu function and operation
notes
Procedure:
1 Press [MENU] key to access the menu
2 Press [A/V] key to select the "Message" and press [OK]
key
3 Press [A/V] key to select "Clear All" and press [OK] key.
4 Press [A/V] key access the sub menu
Press [A/V] key to select Inbcx.
OR
Press [A V] key to select outbox.
OR
Press [A/V] key to select Qulck Note
5 Press [OK] key to confirm
a Press [OK] key and the display shows "Confirm to delete?"
7 Press [OK] key to clear the selected Ilst Or press [Cancel]
key to cancel
3 The display wrll return to the previous rnenu
Note: Llsts cannot be restored alter deletion.
- Contactse
Contact provldes "Address-book" for the portable radlu, Each
entry refers to an allas or ID that you use to make a call. Each
Contact wlll be connected wlth one of (our types of calls below:
Q) Group Call
19) Private Call
(a) General Call
@) Dispatch Call
Note lf tne encryptlon teature rs actrvated on a channel, you
can make the encrypted group call, private call and general
call on that channel. Only when the deslred radlo/radlos
has/have tne sarne encryptlcn key OR the same Key Value
and key ID as your radio, the Iransmisston can be decoded
correctly
0 You radlo can support at most 54 Contacts.
0 Each contact is protnded wlth the tollowing informatlon
- Call type
. Call alias
. Call to
Note:
You can add. delete or edlt the user ID for the drgrtal contact lrst
View Coma List
Procedure:
Press the user-defined [ Contact] key to access contact list
and proceed to step 4.
OR
Follow the steps below to access contact lrst
View the setting of menu function and operation
1 Press [MENU] key to access the menu
2 Press [A/V] key to select "Contact rid press [OK] key
3. Press [A/ V] key to select "Contact List" and press [OK] key.
4 Press [A/V] key to choose the desired alias or 1D and
press [OK] key.
5 Press [A/V] key to select "info" and press [OK] key
5 Display Will show the information ofa contact, such as
name, number and attribute.
7 Press 1 BACK 1 key to return to the previous menu
El Add contact
Procedure:
Press the user-defined [Contact] key to access contact list
and proceed to step 4.
OR
Follow the steps below to access contact list
1 Press [ MENU 1 key to access the menu
2 Press [A/V] key to select "Contao " and press [OK] key.
3 Press [A/V] key to select "Contact List" and press [OK]
key
4 Press [A/V] key to choose the desired alias or 1D and
press [OK] key.
5 Press [A/V] keyto select "Add Contact“ and press [OK] key
5 Display Will show the information ofa contact, such as
name, in number and attribute
7 Press [A/V] key to select ”Name" and press [ OK] key
3 When a blinking cursor appears. use the keypad to type
the name. Or Hold [31 key to change the input method, which
will be shown at the top of the display (“AE” means you are
able to type capital letters "ab" means you are able to input
lowercase letters "12" means you are able to type numbers
from o to 9 ”FY" means you are able to type Chinese With
Pinyin method.)
9 Press [A/V] key to move one space to the Iefl or right
10. Press [ Delete] key to delete any unwanted characters
11. Press [ 0K 1 key to save the name.
12 It will return to the previous menu
13. Press [A v1 key to select "1D Numbef‘ and press [OK] key.
14 When a blinking cursor appears, use the keypad to type
the ID number. at most 5 numbers
15. Press [A/V] key to move one space to the left or right.
15 Press [ Delete] key to delete any unwanted characters
17. Press [ 0K 1 key to save the its number
15. it Will return to the previous menu.
19. Press [A/V] key to select ”Save Comacf‘ and press [OK] key
20. The display Will show "Contact saved"
21 The display Will return to the previous menu
29
30
View the setting of menu function and operation
Note:
0 You can save a contact only when name and lb number
ts lnputled
0 The call type clthe added cunlact must be "anate Call"
5 Edit Contact
Procedure:
Press the user-defined [Contact] key to access contact Ilsl
and proceed to step 4
on
Follow the steps below to edit contact
1 Press [MENU] key to access the menu
2 Press [A/V] key to select "Contact" and press [OK] key
3. Press [A/V] key to select "Contact Llst' and press[OK]key
4 Press [A/V] key to choose the desired atlas or ID and
press [OK 1 key.
5 Press [A/V] key to select “Edit Contact" and [OK] key.
5. Display wlll show the lntormatidn at a contact. such as atlas.
ID number and attribute
7 Press [ /V] key to select ”Allas” and press [ 0K] key.
8 When a bllnklng cursor appears. use the keypad to type
the allas Or hold [a] key to change the lnput method. whlch
will be shown at the top of the drsplay
(.
you are able to input lowercase letters ”12" means you are
' means you are able to type capital letters "ab" means
able to type numbers from u to 9 "PY" means you are able
to type Chtnese wrth Pmytn method.)
9 Press [A/V] key to move one space to the left or rtght
‘lD. Press [ Delete] key to delete any unwanted characters
ll. Press [ OK 1 key to save the alias.
12. The screen will return to the prevlous menu.
13. Press [A/V] keyto select "to Numbel“ and press [OK] key
14. When a bllrlkirtg cursor appears, use the keypad to type
the ID number. at most 5 numbers
15. Press [A/V] key to move one space to the left or nght.
ta. Press [ Delete] key to delete any unwanted characters
t7 Press [ 0k1keyto save the to number
ts The screen will return to the prevluus menu
ts Press [A/V] key to select "Sare Contact" and press [OK] key
20 The drsplay wrll show "Contact saved"
21. The dlsplay wrll return In the prevlcus menu.
Note:
0 You can save a contact only when allas and ID number ls
inputted.
0 Only "anate Call" contact can be edlted
View the setting of menu function and operation
El Delete Contact
Procedure:
Press the user-defined [Contact] key to access contact list
and proceed to step 4
OR
Follow the steps below to delete contact.
1 Press [ MENU ] key to access the menu
2 Press [A/V] key to select “Contact” and press [ OK] key.
3 Press [A/V] key to select ”Contact List" and press[OK]key.
4 Press [A/V] key to choose the desired alias or ID and
press [OK] key.
5 Press [A/V] key to select "Delete Contact“ and press [OK] key
5 The display Will show "Contact deleted"
7. Press [OK] key to the contact. Or press [Cancel] key to
cancel
8 The screen Will return to the preyious menu.
El Send message from the sonnet List
Procedure:
Press the user—defined [Contact] key to access contact list
and proceed to step 4
OR
Follow the steps below to edit contact
1 Press [MENU] key to access the menu
2 Press [A/V] key to select "Contact" and press [OK] key.
3 Press [A/V] key to select “Contact List" and press [otqkey
4 Press [A/V] key to choose the desired alias or ID and
press [OK] key.
5 Press [A/V] key to select "Send Message" and [OK] key
5. When a blinking cursor appears. use the keypad to type
the message.
El initiate a call from contact
Procedure:
1 Press the user-defined [Contact] key The contacts Will be
listed alphabetically
2 Press [A/V] key to choose the desired alias or ID
3 Hold the radio vertically z 5cm to seni (1 to 2 inches] lrom
your mouth
A Press [PTT] key to initiate a call Meanwhile, the LED light
will turn red (it turned on)
5 The display nill show the alias or [D and the icon
5 You can speak clearly into the microphone until the "Tx
Begin Tone" ends (if it has been turned on.)
7 Release the [P'I'I'] key and wait it anyone in the group
make response. the LED lights green (ivenaoled). And the
display Will show the call type icon. Group Call ID or Private
call ID
31
32
View the setting of menu function and operation
s it the "Rx Ended Tone” teature is enabled. you will hear a
short tone when the transmitting radio release the [PTT] key.
which means your radio is free to respond
on
You can initiate a call from menu.
l Press [Menu] key to access main menu
2 Press [A/V] key to choose the "Contact" and press [OK] key
3 Press [A/V] keyto choose the "Contact Lis1" and press [OK]
key
4 Press[ /V] key to choose the desired alias or ID The
contacts will he listed alphabetically
5 Hold the radio vertically z 5cm to 5cm (1 to 2 inches) trom
your mouth
6 Press [PTT] key to initiate a call Meanwhile, the LED light
will turn red (it turned on) The display Will show the alias or
in and the icon
7 You can speak clearly into the microphone until the "Tx
Begin Tone” ends (if it has been turned on )
3 Release the [PTT] key and wait it anyone in the group
make response the LED light turn green (itenabled). And
the display will show the call type icon, Group Call ID or Private
call ID.
9 it the "Rx Ended Tone” leature is enabled. you Will hear a
short tone when the transmitting radio release the [Pi-r] key.
which means yuur radio is free I0 respond
D"Manua| dial "to initiate a private call
Procedure:
1 Press [Menu] key to access main menu
2. Press [A /V] key to choose the "Contact" and press [OK] key.
3 Press [A/V] key to dnoose the "Manual Dial" and press [om key
4 When a blinking cursor appears. use the keypad to type
the ID number, tor a maximum of 5 numbers
5 Press [A/V] key to move one space to the left or right.
5 Press [Delete] key to delete any unwanted characters
7 Finish inputting.
5 Hold the radio vertically 2.5cm to 5cm (1 to 2 inches) lrorn
your mouth
9 Press [Pm key to initiate a call. Meanwhile. the LED light
wtll turn red (it turned on). The display Will show the alias or
la and the icon
10. You can speak clearly into the microphone until the "Tx
Begin Tone" ends (If it has been turned on.)
tt Release the [PTT] key and wait tranyone in the group
make response. the LED light turn green (it turned on). And
the display Will show the call type icon, Group Call ID or Private
Call in
12. lithe "Rx Ended Torte" teature is enabled, you will hear
View the setting of menu function and operation
a short tone when the transmitting radio release the [PTT]
key, which means your radio is tree to respond.
El Advanced Sewicese
Advanced services are needed to be programmed by software
belorehand. and can be accessed by the user-defined keys
or through Contact menu.
El Radio Detecticne
llthis is activated, you can check whether the target radio is
available or not without dislurblng The target radio won‘t
receive any audio or visible notice This function is only
available for the user alias or ID
El Send Radio Detection
Procedure:
t Press the user-defined key [Radio Detection]
2. Press [A/ 7] key to seiect the desired alias or ID, and press [OK].
3 The display Will show "Detecting
4 Wait for confirmation.
5 lithe target radio is available in the system. the display wrll
show "Detection succeeded“ Otherwise, it will show "Detection
Failed"
s The screen Will returns lo the previous menu.
OR
Send radio detection through the menu.
Procedure:
1 Press [Menu] to access the main menu.
2 Press [A/V] key to select "Contact" and press [OK] key.
3 Press [A/V] key to select the desired sub menu
Press [A/V] key to select "Contact List" and press [OK] key
Press [A/V] key to select the desired alias or ID number.
and press [OK] key
Press [A/V] keyto select "Advanced Services" and press [OK] key
OR
Press [A/V] keyto choose the "Manual Dial” and press [OK] key.
When a blinking cursor appears, use the keypad to type the
to number, for a maximum of 8 numbers
Press [A/V] key to move one space to the left or right
Press [Delete] key to delete any unwanted characters
Press [OK] key
The display will show Advanced Services. and press [0K]key
4.Press [A/V] key to seiect'Radln Detection" and press [OK] key
5 The display will show "Detecting ”
5 Wait for confirmation.
7 llthe target radio is available in the system. the display will
show "Detection succeeded” OtherWise, it will show "Detecllon
Failed"
s The screen Will return to the preyious menu
33
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Encryption : Standard V4.4 (128-bit) User Access : Print, Extract, Print high-res Author : XM156 Create Date : 2016:06:29 13:24:49+08:00 Modify Date : 2016:07:07 14:39:05-07:00 XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Metadata Date : 2016:07:07 14:39:05-07:00 Creator Tool : PScript5.dll Version 5.2.2 Format : application/pdf Title : DM 850说明书 英文 20160616.pdf Creator : XM156 Document ID : uuid:69da8815-446a-4dc4-a964-862179593de2 Instance ID : uuid:9e957fac-faa2-475b-9ce5-8e0b39410ae1 Producer : Acrobat Distiller 9.0.0 (Windows) Page Count : 36EXIF Metadata provided by EXIF.tools