FUJIAN NEW CENTURY COMMUNICATIONS DM-8500 DMR TWO WAY RADIO User Manual Part Two

Download:
Mirror Download [FCC.gov]
Document ID	3066804
Application ID	u4Fly8IuF6d+SyGSVshENA==
Document Description	Users Manual Part Two
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	485.29kB (6066075 bits)
Date Submitted	2016-07-18 00:00:00
Date Available	2016-07-18 00:00:00
Creation Date	2016-06-23 17:28:53
Producing Software	Acrobat Distiller 9.0.0 (Windows)
Document Lastmod	2016-06-23 18:00:11
Document Title	DM 8500说明书 英文 20160616.pdf
Document Creator	PScript5.dll Version 5.2.2
Document Author:	XM156

34
View the setting of menu function and operation
Note:
9 ltyou press [Back] key when waiting tor the confirmation,
the radio Will terminate the detection and returns to the previous
menu
9 Your radio must be programmed through programming
software to use this function.
Deall Alerts
it allows you to alert the target radio to reply to you at its
convenience. This is available only tor the alias or ID ot the
private call.
DSend Call Alert
Procedure:
Press the user-defined [Contact] key to access contact list
OR
1 Press [Menu] to access the main menu.
2 Press [A/V] key to select "Contact" and press [OK] key.
3 Press key to select the desired sub menu
Press [A/V] key to select "Contact List" and press [OK] key.
Press [A/V] key to select the desired alias or D number.
and press [OK] key
Press [
[OK] key.
OR
Press [A/V] key to choose the "Manual Dial" and press [OK]
V] key to select "Advanced Services" and press
key
When a plinking cursor appears. use the keypad to type the
D number, for a maximum of a numpers
Press [A/V] key to move one space to the lett or right.
Press [Delete] key to delete any unwanted characters
Press [OK] key
The display will show Adimnced Services, and press [OK] key
4 Press [A/V] key to select “Call Alert" and press [0k] key
5 The display Will shew "Alerting
6 Wait tor confirmation.
7 lithe alert order is sent to the target radio successfuily. the
display will show "Alert succeeded" Othenivise. it will show
"Alert Failed"
3 it will return to the previous menu
Note:
9 ltyou press [Back] key when waiting lor the confirmation,
the radio will terminate the call alert and return to the previous
menu.
9 Your radio must tie programmed through programming
suitware m use this function
El Receive or respond to the call alert a
llyou receive a call alert. the display ‘MH alternate between
"Call Alert" and caller alias or ID
View the setting of menu function and operation
Procedure:
1 You Will hear a short tone repeatedly (if activated).
2 Press [PT‘H to reply to the private call directly Within 5
seconds after call alert is received
OR
Press [OK] key to refuse to reply the private call and exit the
call alert mode
The screen will return to the main screen
Note:
Qlf you don't reply to the call alert in 5 seconds the radio will
exitthe call alert automatically and mark this as a missed call
(which can be checked in the call log)
DRenrote Monitors
Use the remote monitor function to sWitoh on the microphone
ofa target radio (user alias or ID only) No audio orvisible
indication is shown to the target radio. You can use this
function to monitor the surrounding activities of the target
radio
Send Remote Monitor
Procedure:
t Press the user-detined key [ Remote Monitor]
2 Press [A/V] key to select the desired alias or H), and
press [OK]
3 The display will show "Monitoring
4 Wait for confirmation.
5 If the target radio is activated successlully, the display Will
show "Monitoring" and starts to receivmg the audio signals
from the target radio until the preset monitortime runs out.
otherWise, the display Will show “Monitor Falled"
6 The screen Will return to the preVious menu.
0R
Send remote monitor from the menu
Procedure:
1 Press [Menu] to access the main menu.
2 Press [A/V] key to select "Contact" and press [OK] key.
3 Press [A/V] key to select the desired sub menu
Press [A/V] key to select "Contact List" and press [OK] key
Press [A/V] key to select the desired alias or ID number,
and press[0K] key
Press key to selec1 "Advanced Services" and press [OK] key
OR
Press [A/V] keyto choose the "Manual Dial" and press [OK] key.
When a blinking cursor appears, use the keypad to type the
lD number. for a maximum of 8 numbers
Press [A/V] key to move one space to the left or right
Press [Delete] key to delete any unwanted characters
35
36
View the setting of menu function and operation
Press [OK] key
The display will show Advanced Services. and press [OK] key.
4. Press [A/V] key to select "Remote Monitor" and press
[OK] key
5. The display viiill show "Monitoring.
5. Wait tor confirmation.
7 If the target radio is activated successfutty, the display will
show "Detection succeeded" and starts to receiving the audio
signals from the target radio until the preset monitor time runs
out athenivise, the display Will show "Monitor Failed"
s. it Will return to the previous menu
Note:
9 lr you press [Back] key when waiting torthe confirmation,
the radio wlll terminate remote monitor and return to the
previous menu
9 Your radio must be programmed through programming
software to use this tunction.
D Remote Kill: a
You can kill any other radius in the system For example. you
may want to kill a stolen radio to prevent the thief from uslng
it. and re-activate that radio when it is retrieved
El Send Remote Kill:
Fiooeduie:
l.Press the usersdeflned key [Remote Kill].
2 Press [A/V] key to select the desired alias or lo, and
press [OK]
3 The display Will show "Remote killing.
4 Walt for confirmatlcn
5 it the target radio is killed successtully. the display Will show
"Remote Kill succeeded" and the target radio will be forbldden
to tie used
othenwise. the display Will show “Kill Failed"
s The screen will return to the previous menu.
0R
Send remote kill trom the menu.
Procedure:
t Press (Menu) to access the main menu
2 Press [A/V] key to select "Contact" and press [OK] key.
3 Press [A/V] key to select the desired sub menu.
Press [A/V] key to select "Contact List" and press [OK] key
Press [A/V] key to select the desired alias or ID number,
and press [OK] key.
Press [A /V] keytp select "Adimnced Services- and press [OK] key
OR
Press key to choose the "Manual Dial" and press [OK] key
When a blinking cursor appears, use the keypad to type the
lD number, for a maximum of 6 numbers
Press [A/V] key to move one space to the lett or right.
Press [Delete] key to delete any unwanted characters
Press [OK] key
View the setting of menu function and operation
The display Will show Advanced Services, and press [OK] key
4. Press [A/V] key to select "Remote Kill" and press [OK] key
5 The display Will show "Remote killing.
6 Wait lor connnnation.
7 lflhe target radio is killed successfuily, the display Will show
"Remote Kill succeeded" and the target radio Will be forbidden
to tie used
orhenivise the display Will show "KiH Failed"
s ltviiill return to the previous menu
Note:
9 it you press [Back] key when waiting tor the conlirmation.
the radio Will terminate radio kill and return to the previous
menu.
9 Perrorming Radio kill is limited to radios with these lunction
activated Check With your dealer orsystem administrator lor
detailed information.
9 Your radio must be programmed through programming
software to use this function
DRadio Revive 9
Users can activate any other radios which have been killed
For example, users might want to reactivate and use a stolen
radio which has been killed.
Send Radio Revive
Procedure:
t Press the preset [Radio Revive] key
2. Press [A/V] key to seleol the desired caHer alias or D
user, then press [OK] key
3. Radio screen wrll display/show radio revive
4 Wailing for confirmation
5. It Will send out the remote revive signal to the target radio.
if the signal is picked up successtully by lhe target radio, the
display will show "Revive Succeeded"
0R
It will show "Revive failed"
6. Return to the previous menu.
OR
Send Radio Revive instruction via menu
Procedure:
1 Press [Menu] key to access menu
2. Press [A/V] key to seleol “Contact" and press [OK] key.
3. Press [A/V] key to access the sub menu.
Press [A/V] key to select "Contact list" and press [OK] key
Press [A/V] key to select a oalleralias or ID and press [OK] key
Press [A/V] key to seiect "Advance Servioes"and press [OK] key
OR
Press [A/V] key to select " Manual Dial" and press [OK] key
When a blinking cursor appears, use the keypad to input the
contact ID. (up to 8 digits)
Press [A/V] to move one space lo the left or right
Press [Delete] key to remove any unwanted characters or
37
38
View the setting of menu function and operation
enter a contact lD by input from the keyboard After tinish
editing. press [OK] key.
Display screen shows the sub menu of "Advance Services"
then press [OK] key
4 Press [A/V] keyto select "Remote Revive"and press [OK] key
5. Radio screen will display/show radio revivet
6 Waiting liar eonlirmation
7 ltthe display shows the target radio is "Revlve Succeeded"
then the target radio is available to use.
OR
ltthe target radio is tailed to revive then it will show "Revlve
railed"
Return to the previous menu.
Note:
o While waiting for conflrmatlan. press [Back] key to end /
terminate the Radio Revive. and returns to the previous menu
9 Only the radio With this lunction activated can carry out
this tunction Please contact your dealer or system
administrator for further information.
9 Your radio must be programmed to allow user to use this
function.
5 Emergency Alarm 6
Emergency alarm functlon is mainly used to indicate an
emergency situation User can initiate an emergency call any
tlme at radlo screen or even whlle the channel is in used.
@ Your dealer can set the key duration when pressing
emergency call button
. snort press shorter than a long press
. Long press 500 milliseconds to 5000 milliseconds
@ Your radio supports 3 emergency alarm modes
. Emergency Alarm
. Emergency Alarm&0all
. Emergency Alarm&Vuloe
The alarm is a non—voice signaling, which can enable another
radio to respond This function can be used when users press
the emergency alert button
@ Your radio alarm supports tollovring types
. Disable the radio can't send the alarm signal
. Standard7Radio Transmitter .— the radio can send the alarm
signal and show audio and visual alert
. Silent Radio Alarm signaling the radio can send the
alarm signal, but don‘t provide any audio or visual prompt that
indicates as "Emergency-mode or in addition there will be
no any sounds received
. silent With Audio Radlo Alarm signaling, the radio can
send the alarm signal without showing audio or visual alert
and radio viiill send the emergency alarm on the eligible
channel
Note:
Qlt is available only in digital mode
View the setting of menu function and operation
g Receiving Emergency Alarm
When lhe radlc receives an emergency alarm, the screen
displays a hlnl lcr recelvlng an emergency alarm unlll tlle
ccnnrmaticn ls sent and users don't exit lrom llle emergency
mode Users wcn'l be able to receive any other alert or any
calls until users exit lhe emergency alarm
procedure:
When the emergency alarm ls recelved, llle screen wlll display
llle emergency call lCOn, numbers of recelved alarms and alsc
lhe characlers wlllch are alternately displayed lhe sender's
ID and tile radlo will send out ringtone at lhe same tlme
El Response Emergency Alarm
Procedure:
When the radlc receives an emergency alarm:
1 Press any key lc step recelving an emergency alert
2 To answer / reply, hold the radlc vertically 2 5cm lc 5cm
(1 to 2 incllesllmnl your mculll lflhe "Rx End Tone" feature
ls enabled, you Wlll near a shorl lone when the transmltllng
radlo release the [PTT] Key, means llle channel ls free to
response.
3. Press [PTT‘] key to stan a call wllll a ladle vrlth an emergency
call. LED indicator llghls red (lienabled), and the radio ls ln
an emergency call made.
4 Waillng for tile "TX Begin Tone" to end (lfenabled) then
user can speak clearly lntc lhe mlcrephcne
5 Release [P‘l'l'] key to receive When lhe targel radic ls
respondlng, llle LED lndlcator llghls green (ll enabled).Users
Wlll see a group call lcon, gmup alias, or H).
e Aflerlhe call is over, shcn press the [-1 key, lhen press
llle emergency alarm button to clear all tile nollficatlons for
receiving an emergency call and exit the emergency mode.
7 The radlc screen will sllcw "Exlt emergency mode" and
return to the maln screen
El Sending Emergency Alarm
It users are allowed to send an emergency alarm, ll ls non-
vclce Slgnal, lhe screen of lhe larget radlc Wlll sllcws lhe
visual characters or icon as well as an alert tcne.
Procedure:
1. Press the preprcgrammed [emergency alarm ON [OFF] key
2 The screen allernates between an emergency call characler
and la cllhe largel radio Then the emergency call loan will
appear on tile maln screen
3 When an emergency alarm ls received to the target radlo,
ltle radlc Will make an emergency/urgent call, the screen Wlll
display "Senl Succeeded"
OR
ll the radlc hasn't recelved any emergency alert lrcm the
target radlc, lt le beep and tile screen Wlll display "Sent
Falled"
4 Exitlhe Emergency alarm mode, and relum to lhe maln screen
39
40
View the setting of menu function and operation
Note:
li your radio is set to "Sllent" option, no audio or visible indication
is shown to the your radio
El Sending Emergency Alannrlcall
This leature allows users to send an emergency alarm to the
targel radio. After confirmation, both radios Will communicate
wiih a delault emergency channel
Procedure:
1. Press the preprogiammed [ Emergency alarm ON l0FF] Key.
2 The screen alternates between an emergency call character
and ID or the target radio Then the emergency call icon will
appear on the main screen.
3 When an emergency alarm is received to the target radio.
the radio Will make an emergency/urgent call. the screen Will
display "Sent Succeeded"
4. To answer/ reply. hold the radio vertically 2 5cm to 5cm
(1 to 2 Inches) lrom your mouth.
5 Press [Pm key lo start a call with the iargei radio The
LED indicator lights red (it enabled) and the radio is in an
emergency call mode.
6. Waiting lor the "Tx Begin Tone" to end (ilenabled) then
user can speak clearly into the microphone
7. Release [FTT] key to receive. When the target radio is
responding. the LED indicator lights green (lienabled) Users
will see a group call icon, call group alias. or lD
s it enabled the "RX Ended Tone" runciion. when the radio
release the [P'l'l'] butlan. users will hear a short tone which
said the channel is idle and waiting tor your answer please
Press [PTT] to answer.
OR
Press the preset [Emergency Alarm SWitch] button lo exit the
emergency alarm mode
9 Return to the previous menu.
Note:
9 liyour radio is set to “silent" option. the screen Will not
send any sound or voice while in the emergency call mode.
neither lrom the target radio to receive a respond to any call
until users press the [PTTJ key to initiate a call
9 ll your radio is set to “silent" option. no audio or visible
indication is shown to the iargei radio The radio will prompi
only when you press [P‘ITJ key to initiate or respond to a call
El Sending Emergency Alarm with Voice
This leaiure allows users to send an emergency alarm to lhe
target radio/radios Afler confirmation. your radio microphone
(WC) and lhe transmitter will be auiomaiically acllvaled.
allowmg you lo communicaie with other iarget radios wiihout
the need to press [PT-n key This activation orihe microphone
function is called an "Emergency microphone"
ltihe user press [PTT] key during the programmed emergency
microphone iransnnission period. the radio ignores the [P‘l'l']
press and remains in emergency mode
View the setting of menu function and operation
Note: 0 If the user presses the [P‘l'l'] key durrng emergency
mrcrophone, and contrnue to press [PTT] key atter the
emergency mrcrophone duratron expires Then the radro
contrnues to transmrt the cat untrt you reiease the [PTTt key
Procedure:
t Press the pre-programmed [Emergency atarm ON [OFF] key
2 The screen atternates between an emergency cait character
and ID of the target radro Then the emergency cati icon witi
appear on the marn screen
3 When the screen shows "emergency atarm sent successruiiy",
users can speak cteariy with the mrcrophone(MIC), when the
"Emergency microphone“ is activated, radio vviit automatrcaity
start to transmrt srgnats without needrng to press the [PTT]
key untri a detauit emergency mrcrophone time rs over then
it wiit stop to transmit
4 The LED indicator tights red (it enabied) and the radio is
in an emergency cait mode
5 Atter the emergency microphone is over, the radro wiii
automaticaity stop transmit the signais To start agarn, press
[P‘I'I'J key to transmrt
Note:
9 it your radio rs set to "srient" optron, no audio or vistble rndrcation
is shown rn the emergency caii mode, neither from the target
radio to receive any response, untrt an emergency mic transmitting
time rs overand you have to press the [WT] key
9 If your radro rs set to "Silent with vorce" optron in emergency
cati mode when you use the emergency microphone to inrtrate
a cat, or when the derauit emergency mrcrophone time has
ended, no audro or vrsrbie rndicatron is shown but oniy when
you press [P‘I'I'J key, these indication wiii appear again
Attention:
9 itthe emergency atarm tarts, the radro returns to the main
screen
a Pie-initiate Emergency mode
@ There are two srtuatrons whrch may appear [or the toiiowing
1 When the radro rs rn emergency mode, and the channei
is changed, thrs wrti attow radio to exit the emergency mode
ityou need to activate an emergency atarm on the new
channei, you need to repress the preset [emergency alarm
switch] key, and then restart the emergency caii
2 Press the preset [emergency atarm ON/OFF] key whrie
emergency atarm rs actrvated and is transmrttrng. this will
enable the radro to exit the emergency atarm mode, users
need to repress the preset [emergency atarm ON/OFF] key,
and then restart the emergency atarm catt.
© Aulomallc or menuet exit emergency mode
t The emergency atarm acknowiedgement rs received white
your radio rs actrvatrrrg emergency atarm [For emergency
alarm ONLY), your radro wrti exrt emergency mode.
2 The maximum numtrerot attempts to pertorm an emergency
41
42
View the setting of menu function and operation
alarm call, it Will automatically eXit emergency alarm mode
3 When the preset [Emergency Alarm Switch] key is pressed,
your radio Will exit emergency alarm manually
Note:
9 If your radio is powered off during an emergency cali, itwill
exist the emergency mode The radio Will not reinitiate the
emergency mode when the radio is turned on
fiEncryption O
llthis feature is enabied, it is advantageous to prevent other
users from using the software encryption method without
authorization. Part of the transmitted signal and user
identilication is not encrypted The radio must enable the
channel's encryption function to transmitthe encrypted signal,
although this is not required to receive / transmit. At the same
lime in the encryption of the channel, the radio can receive
a clear transmission signal.
@ Your radio supports the ioliowirig types at encryption:
. Low — Basic encryption
- Widdle 7 strong encryption
. High 7 Enhanced encryption
Tips:
9 Only one at the above mentioned groups can be assigned
to a ladle
@Tc decrypt the encrypted call or data transmission, user
must have the same encryption key or the same key level,
key value and key in it user receive a different encryption
key, key value and it) key With encryption call , user can hear
the contusing transmission oisignals (baslc encryption) or
listen to nothing( Enhanced / super strong encryption ).
©When user's radio activate the encryption, the icon is
displayed on the top of the screen [ 3]
Procedure:
1 Press the preset [Encryption ON/OFF] key
2 While turn on , the icon [ g] is displayed on the top the
screen
3 While turn off, the icon [Er] is disappeared on the top ot
the screen.
Note:
9 Your radio must be pre-progrenimed to allocate the key
values, Key ID and encryption type.
9 Some types of radios may not provide a single channel
encryption or not encryption function Please contact your
dealer or system administratorforrurtner inlonnation.
- Call Log 8
Your radio will record all recent call, received and missed call
Users can use call log to View and manage the recent call
activity
@ Users can perform the tollowmg tasks in each call list
0 Check] View
0 Talk time
View the setting of menu function and operation
- Send Message
. Delete
- Clearthe lrst
Checking the latest call acfivity
Check the list at missed calls, recewed calls and outgoing
calls
Procedure:
1 Press [Menu] key to access menu.
2 Press [A/V] key to select "Call Log" and press [OK] key
3 Press [A/V] key to select "Missed calls". lncdmrng calls
and Outgcrng callsvand press [OK] key
4 Screen wlll dlsplay the most recent call log
5 Press [A/V] key to select caller allas or lD.
To answer/ reply. hold the radlo vertlcally 2.5cm to 5cm (l
to 2 inches) lrom your mouth Hold [PTT] key to the caller
allas or lD. ll enabled, LED lndicator light wlll turn to red. the
screen wrll dlsplay the caller allas or ID as well as a call lcon
Waltlng for the "TX Begin Tone" to end (rt enabled) then user
can speak clearly lrltu the mlcrophcne. Release [PTT] key to
wail torthe answer
ltanycne trern the group responses the LED indlcatorwill
llghls green (if enabled) then users can see the call loan,
group call ID or user ID on the screen
It "TX Begin Torte" ls enabled, you wrll hear a short beep when
the target radio is released [PTT] Press [PTT] key to answer
OR
Press [Menu] key to access rnenu
Press [A/V] key to select "Search"
Press [OK] key
The Screen drsplays the selected alias or ID number.
Press [Back] key to return to the prevrous rnenu
0R
Press [A/V] key to select "Talk Time"
Press [OK] key
The screen displays the time and the duration at the call.
Press [Back] key to return to the previous rnenu
OR
Presskey to select "Send Message“
Press [OK] key
The Screen displays the lnput bar and a blinklrlg cursor.
Please reter to Write Messgaes on Page 25 tor more detailed
lrliormatian
OR
Press [A/V] key to select "Delete"
Press [OK] key
The screen displays to ccnhrm deletlan of the character
Press [OK] key Delete the selected contact name or lb or
press the cancel key Cancel the selected contact lrst or u:
a Press [Back] key to return to the prevlaus menu
43
44
View the setting of menu function and operation
ClearCall Log list
Procedure:
l Press [Menu] key to access menu
2 Press [A/V] key to select "Call Log" and press [OK] key
3. Press [A/V] key to select "Clearlhe list' and press [OK] key.
4 Press [A/V] Key to select requlred lisl to delete (Mlssed
calls, lncoming calls, outgoing caHs) Then press [OK] Key
to confirm
5 The screen displays the call log has been cleared
5 Press [Back] key to relurn to lhe previous menu
I Attachment
Users can View some general lnfurmatlun from lhe attachment
menu
Note:
0 Some information otlhe radius only support to view it the
radio wlth lhe optional lunciions
IView attachment inlemratiori
Procedure:
1 Press [Menu] key to access menu
2. Press [LIV] key to select "Attachment" and press [OK] key
3 Press [A/V] key to select "Llsl" and press [OK] key
4 The screen displays intermation of the entry lists
5 Press [A/V] key to select Temperature menu
Press [OK] key
The screen displays the lemperalure value
Press [Back] key lo return to the preinous menu
OR
Press [A/V] key to select "Flashlight"
Press [OK] key. the screen displays Flashlight 0N / OFF
Press [A/V] key to select "ON/0W
Press [OK] key. the screen displays the setting has been
completed.
Press [Back] key lo return to the preinous menu
0R
Press key to select "Dale" then press [OK] key
The screen displays the current date (the date is sel)
Return to the previous menu
5 Press [Back] key to relurn to the previous menu
I cps (Optional)
You can choose to purchase the radio with or without GPs
feature GPS iealure allows you to check orsend your current
longitude, lalitude, lime, date. altilude and speed etc dala
GPS ONIOFF
Procedure:
1 Press [Menu] key to access menu.
2 Press [A/V] key to select "GPS"and press [OK] key
3 The screen dlsplays the available options cl GPS
4. Press [A/V] key to select desired option and press [OK] key
Press [A/V] key to select “GPS 0N/OFF"and press [OK] key
Press [A/V] key to selecl "GPS ON"and press [OK] key
View the setting of menu function and operation
The screen displays lhe setting is done, when GPS is lurned
ON‘ the GPS icon will show on lhe main screen
Your radio returns to lhe previous menu
OR
Presskey to selecl “GPS OFF" and press [OK] key
The screen displays lhe setting is done, when GPS is lurned
OFF, the GPs icon will disappeared on lhe main screen
Your radio returns to lhe previous menu
5 Press [Back] key to relurn to lhe previous menu
View Location and GPS data tnnsmissian
Procedure:
‘l Press [Menu] key to access menu
2 Press [A/V] key to select "GPS" and press [OK] key
3 The screen displays the GPs menu options
4 Press [A/V] key to select "Lls " and press [OK] key
Press [A/Vl key to select "Position" and press [OK] key.
The screen displays the GPS inlormatiori
Press [A/V] key to view GPS entries.
Press [Pack] key lo return to the previous menu
OR
Press [Send] key to send GPS data.
The screen displays sub-menu options
Press [A/V] key to select "Search contacts"and press [OK] key
The screen displays Contact lists
Press [A/V] key to selecl the desired contact alias or in
Press [OK] key and send the GPS data
The screen displays "Sending message" or "Message has
been sent"
The screen returns in Canlact List
Press [Back] key lo return to the previous menu
OR
Press [A/V] key to select "input number'and press [OK] key
The screen displays a blinking cursor and users can inputihe
coniact ID with keyboard number
Press [A/Vl key to move the cursorto lhe len or right
Press [delete] key to delete lhe characler betcre lhe cursor
Alterlhe inpui is completed, press [OK] key and start sending
GPS data
The screen displays "Sending message"ar "Message has
been sent"
The screen relurns to the coniact ID menu
Press [A/Vl key to move the cursorto lhe len or right
Press [delete] key to delete lhe cursor
5 Press [Back] key to relurn to the previous menu
Time-zone Position Calibration
Procedure:
1 Press [Menu] key lo access menu
2 Press [A/V] key to select "GPS"and press [OK] key
3 The screen displays the GPs menu options
4 Press [A/V] key to select "Time zone"and press [OK] key
45
46
View the setting of menu function and operation
The screen displays the Time zone menu
Press [A/Vl key to select "Auto Aligning"
The screen displays “Wailing "
Press [Back] key to cancel the auto calibration and return to
the menu
OR
Press [A/Vl key to select "Manual Aligning"
The screen displays Time zone lists
Press [A/V] key to select current time zone entry and press
[OK] key
The screen displays the Calibration is complete
The screen returns to preinous menu
5 Press [Back] key to return to the previous menu
Note:
9 When GPS is in automatic calioration, you may need to
Wall for a moment, untII the screen WI“ Show "Waltlng In
progress" disappears then it Will finish.
9 GPS Manual settings to calibrate the time, select the actual
time dlflerence (a ,y_
I Settings
You can customIZe (he functionai options of your radIo
according to your prelerences
You can carry out the following tasks in Settings under the
menu
0 Machine Properties
0 Parameter Setting
0 Regional Settings
0 Time Setting
0 Tone Setting
0 General Setting
0 Restore Factory Settings
0 Function Setting
0 Signaling Setting
0 Encryption Settings (Only Applicable To This Type)
Machine Properties
II your dealer or system administrator allows you to settings
the radio, you can set the menu and other operation settings
to see your radio Call id and Group ID.
[I View ID Radio
Check your radio ID number and Group ID information
Procedure
Cl) Press [Menu] Key to aocess lhe menu
(2) Press [LIV] key to select "Settings: and press [OK] button
(3) Press [A/V] key to select "Machine Properties", and press
[OK] button to check raeio ID or Group ID
(4) Press [A/V] key Io return to the previous menu
Press [ IV] key to select Private Call , and press [OK] button
OR
View the setting of menu function and operation
Press [A/V] key to select aroupCall . and press [OK] button
4 Radio displays the current selected call or group call lD
information
5 Press [BACK] key to return to the previous menu
'Pammetzr Setting
ll your dealer or system administrator allows you to default
the radio settings, then you can set menu and other operatings
system by parameters. call time. high/low power, relay time
slot and power saving mode.etc.
El Call Time Limit
To avoid aitecting communications ot others due to the long
time Iransmittlng. you can turn the call time limit function ON
or OFF When enables the call time limit lunction, your radio
Will oegin liming the moment you press the [PTT] buttonwhen
reaching the set time limit. the radio will automatically stop
transmitting Unless you release the [PTT] button and press
it again
Procedure:
t Press [Menu] Key to access the menu
2 Press [A/V] key to select "Settings". and press [OK] button
3 Press [A/V] key to select "Parameter Setting then press
[OK] button
4 Press [A/V] key and choose trom the tollowing options,
then press [OK] button
Press [A/V] keyto select "Call Time Li then press [ombutton
Press [A/V] key to select "Time Limit Setting", then press
[OK] button.
The screen displays the talk time length (in seconds). (Setting
range: 5005 ~ 205)
Press [LIV] key to select the time value.
Afler complete the selection
Press [A/V] key , according to the contirmation, the screen
shows "Long call placement has been set" or press [BACK]
key to return to the previous menu
OR
Press [A/V] key to select "ON/OFF Call Time leil" then
press [OK] button.
Press [A/V] key to select "ON/OFF Menu [A V] then press
[OK] button.
The screen displays the setting is completed and return to
the previous menu
5 Press[BACK] key to return to the previous menu.
El High/ Low Power
ll it is allowed by dealeror system administrator. users can
set and check the output power level through menu display.
Note:
9 Radios wtth high power can communicate With target radio
in a longer distance.
9 Radlos With low power can communicate with the target
47
48
View the setting of menu function and operation
radio in a shorter distance
Procedure:
Press the preset High/Low Power key to Switch between high
power and low power.
OR
Choose tne power level from the menu:
t. Press [Menu] key to access the main menu.
2. Press [A/V] key to select "Settings-and press [OK] key.
3 Press [A/V] key lo select "Parameler Setting" and press
[OK] key.
4 Press [A /V] key to select "High/Low Pouef'and press{0K] key
Press [A/V] key to select "High Power" and press [OK] key
The screen shows "Powered selected" and packs to the
previous menu.
OR
Press [A/V] key to select "Low Power' and press [OK] key.
The screen shows "Power Selected" and backs to the previous
men u
5. Press [Back] key to return to the previous menu.
El Repeater-Timeslet
ll it is allowed by clealer or system administrator. users can
set and check the repeatertlmeslol through menu display
Procedure:
t Press [MENU] key to access the main menu
2 Press [A/V] key lo select "Seltrngs" and press [OK] key
3 Press [A/V] key to select "Parameter Seltrng" and press
[OK] key.
4 Press [A/V] key to select "Repeater Trmeslot" and press
[OK] key.
5 Press [A/V] key to select the subrmenu.
Press [A/V] key to select "Trmeslct 1" and press [OK] key
The screen shows “Timeslot selected" and backs lo the
previous menu.
OR
Press [A/V] key to selecl "Trmeslet 2" and press [OK] key
The sreen shows "Slot Selected" and packs to the previous
menu.
6 Press [Back] key to relurn to the previous menu
El Power Saving Mode
ll it is allowed by dealerer system administralor. users can
set or check the Power Saying Mode ollne radio tnrcugn
menu display. to improve the energy ulrlrzatron and exlend
tne pattery operating time
Procedure:
1 Press [MENU] key to access the main menu.
2 Press [A/V] key to select "Settings" and press [OK] key
3 Press [A/V] key to select "Parameter Setting" and press
[OK] key
View the setting of menu function and operation
4 Press [A/V] key to selecl "Power Save Mode" and presleK]
key
5 Press [A/V] key lo selecl lhe sub-menu
Press [A/Vl key to "ON/OFF" and press [OK] key
Press [A/Vl key to selecl ON or OFF, and press [OK] key
The screen shows "Saved" and backs to the previous menu
OR
Press [A/V] key lo selecl "Deferred Starling Time" and press
[OK] key
The screen shows ihe starting time ol Power Saving Mode
on the display
Press [A/V] key to selecl the Starting Time (range 105-605).
lhen press [OK] key
The screen shows "Selecied" and backs to the previous menu
OR
Press [A/V] key (a seieol "Sleep Time Ram" and press [OK] key
The Sleep Time Ratio wrll be lrsled on the display
Press [A/V] key lo selecl your desired rallo, and press [OK] key
The screen shows "Selecied" and backs to the previous menu
5 Press [Back] key lo return lo the prevlaus menu
Note:
The seltings are valrd ONLY when lhe Power Saving Mode
is lurned on
Please set the sleep hrne raho reasonably accardlng to lhe
aclual need (The longer lhe sleep time you set. the longer
ihe bahery working lime would be But it may also cause delay
in re-connecl ihe signal)
Zone Selling
A zone is a group ol channels. Your radio suppons up to 16
zones wrlh a maximum ol 16 digilal channels and 16 analog
channels per zone.
El Selecta Zone
ll it is allowed by dealer or system administralur. users can
set and check the zone iniormahon through menu display
Procedure:
Press the presel [Zone] key m choose a zone for the radio
OR
Follow lhe sleps below
1 Press the [Menu] key to access the main menu.
2 Press [A/V] key to selecl [Selling]. and press [OK] to
access the sub-menu.
3 Press [A/V] key to select [Zone] in subrmenu. and press
[OK] lo access zone lrsl
4 There are lhe zone lists (16 zones at most)
5 Press [A/V] key lo selecl a desired zone in zone lisl and
press [OK] to conhrm
s The screen shows "Zane Selecled"
7 The radio reiurns lo the home screen
Mole:
49
50
View the setting of menu function and operation
9 The number and names of the zones tn the llsl should be
preset by your dlslrlbutcr or system admlnlstralor (there can
be a maxlmum of 16 Zones)
9 The zone ls showed on the screen after II is selected
Time Setting
ll rt ls allowed by dealer or system admlnlstralor, users can
set and check the date‘ time. and date format through menu
display.
Procedure:
Settlng the timedate and date dlsplay lormat.
Procedure
‘l. Press [Menu] Key to access the menu
2 Press [A/V] key to select "Settings" then press [OK] key
3 Press [A/V] keyr select "Tlme Setttngs" then press [0K]key
4. Press [A/V] key to select the deslred subrmenu.
Press [A/V] key to select “Date" and press [OK] key.
There is year/month/day (dependlng on the date lormat).
Press [A/V] key and then lnput the date
The screen shows "Date Saved" when the date ls set Please
press [Back] to relum to the prevtous menu
OR
Press [A/V] key to select "Date Format" and press [OK] key.
There is drtlerent date lormat listed on the display. VIM/Dr
M/D/Yr DIM/Y.
Press [A/V] key to select the desired dale immal‘ and press
[0k] key
The screen shows "Date Format Saved" and backs to the
prevlous menu
Prompt Tone
Users can set or check the prompt of the radln through the
menu, rlrl rs allowed by the drslnoutor or system admrnrslratcr
You can set or check the prompt otlollowrng lunotrons:
. Profiles
. Keytone
. Low Battery Alert
. Message Tone
. anale Call Tone
. Group Call Tone
. Call Alert Tones
El Profiles
ll lt is allowed by dealer or system aomrnrstrator, users can
set and check the prohle tone ot the radln through menu
display.
Profile Setting
There are 4 profiles available on your radio
. standard 7 turn on all prompts
. Sllenl 7 turn otl all prompts
. Vlbrate 7 vlbrate but without prompts (optional)
. Vlbrate on Ring 7 vlbrale with prompts on (optional)
View the setting of menu function and operation
Note:
Those ploflies wrln l -"are opilonal or nol avallabie al present.
Procedure:
1 Press [Menu] key lo access lhe menu
2. Press [A/V] key Io select "Settings" then press [OK] key
3. Press [A /V] key, select "Prompt Tone" then press [OK] key
4 Press [A/V] key lo select "Profiles"
5. Press [A/V] key to select the desired option.
Press [A/V] key to select "Standard" and press [OK] key
The screen shows "Profile Saved" Please press [Back] lo
relum to lhe previous menu
DR
Press [A/V] key to select "Sliem" and press [OK] key
The screen shows "Pmfiie Saved" Please press [Back] to
relurn to lhe previous menu
OR
Press [A/V] key to selecl "Vibrate" and press[OK] key
The screen shows "Proms Saved" Please press [Back] to
return to the previous menu
OR
Press [A/V] key to select "\fibrate on Ring" and press [OK] key.
The screen shows "Proflie Saved" Please press [Beck] lo
return to the previous menu
5 Press [Pack] to relurn to lhe previous menu
Mole:
You cannot operate or sel those profiles lhal are optional or
not available
El Keytone Setting
Olf it is allowed by dealer or system administrator, users can
set and check lhe keytone ofthe radio through menu display
OYcu can turn on or ottlne keytone and adlusl its volume
Procedure
Press [Menu] Key to access the menu
Press [A/V] key to select "Settings" then press [OK] key
Press [A/V] key. select "Prompt Tone" then press [OK] key.
Press [A/V] key to select "Keylnne Setting"
Press [A/V] key to select the desired subsmenu.
Press [A/V] key to select "ON/OFF" and press [OK] key.
Press [A/V] key to select "ON" and press [OK] key.
The screen shows "Keytone Saved" and backs tothe previous
men u.
OR
Press [A/V] key to select "ON" and press [OK] key.
The screen shows "keytone Saved" and backs to the previous
other»)
men u.
OR
Press [A/V] key to select "keytone Voiume" and press [OK] key
Press [A/V] key to selecl the volume, and press [OK] key
51
52
View the setting of menu function and operation
The screen shows "Volume Saved" and backs to the previous
men u
5 Press [Back] to return to the previous menu
El Low Pattery Alert
it it is allowed by dealer or system administrator, users can
set and check low battery alert through menu display
Low Pattery Alert Setting
You can turn on orofllhe low battery alert and adiust its
volume.
Procedure
1 Press [Menu] Key to access the menu
2 Press [A/V] key to select "Settings" and press [OK] key
3. Press [A/V] key. select "Prompt Tone" and press [OK] key.
4. Press [A/V] keyto select "Low Battery Alert' and pressloK] key
5 Press [A/V] key to select the desired sub-menu and press
[OK] key
Press [A/V] key to selecl “ON/OFF" and press [OK] key
Press [A/V] key to select “ON" and press [OK] key.
The screen shows "Alert Saved" and backs to the previous
menu.
DR
Press [A/V] key to select “0N" and press [OK] key.
The screen shows "Aerl Saved" and packs to the previous
menu
OR
Press [A /V] keyto select "Volume Control" and press [OK] key
Press [A/V] key to select the volume, and press [OK] key.
The screen shows "Volume saved" and backs to the previous
men u.
5 Press [Pack] to return to the previous menu.
El Message Tone
ll it is allowed by dealeror system administrator. users can
set and check the message tone through menu display.
Message Tone Setting
You can selectthe desired message lone (tone 1 - 5) showed
when there is a message received
Procedure:
t Press [Menu] key to access the menu
2 Press [A/V] key to select "Settings" and press [OK] key
3 Press [A/V] key, select "Prompt Tone" and press [OK] key
4. Press [A/V] key to select "Message Tone" and press [OK] key
5 There are different message lone options on the display
5. Press [A/V] keyto select the desired “me and press [OK] key
7 The screen shows "Tone Saved" and backs to the previous
men u
8 Press [Back] to return to the previous menu
El Private Call Tone
it it is allowed by dealer or system administrator. users can
View the setting of menu function and operation
set and check the private caii tone through menu disptay
Private Cstt Tone Setting
You can turn on or ott private cati tone wnen the radio transmits
or receives the private can, and select the desired tone from
tone 1 to tone 5.
You can turn on or oft the private ceti tone in 4 ditterent modes.
. TX Begin Tone 7when you press [PTT] key to transmit.
- TX Ended Tone 7 when you reiease [P‘IT] key.
0 RX Begin Tone 7 when the radio is in receiving
- RX Ended Tone 7 when the radio stops receiving
Note:
Tick "ti‘ " to turn on the tone. Untick "v " to turn amhe tone
Procedure:
1 Press [Menu] Key to access the menu
2 Press [A/V] key to select "Settings"and press [OK] key
3 Press [A/V1key, seiect "PromptTone"artd press [OK] key
4 Press [A/V]keymseiec1“anale CaH Tone" and press [OK] key
5 Press [A/V] key to seiecttne desired subrmenu and press
[OK] key
Press [A/V] key to seieot "ON/OFF" and press [OK] key
Press [A/V] key to seiect "ON"ur "OFF"artd press [OK] key.
The screen returns to the preVious menu.
OR
Press [A/V] key to seieot "Ring Tones" and press [OK] key
There are different tone options (lone 1.5) on the dispiay
Press [A/V] key to select the desired tone and press [OK] key
The screen shows 'Tone Saved"artd backs to the previous menu
6 Press (Back) to return to the previous menu.
El Group Call Tone
it it is aiiowed oy deaier or system administrator. users can
set and check the group catt tone througn menu dispiay
Group Call Tone Setting
You can turn on or off group cait tone when the radio transmits
or receives the group cati, and seiect the desired tone trom
tone 1 to tone 5.
You can turn on or otttne group cati tone in 4 ditterent modes
- TX Begin Tone 7when you press [PTT] key to transmit.
- TX Ended Tone 7 when you reiease [P‘IT] key.
- RX Begin Tone 7 when the radio is receiving.
- RX Ended Tone 7 wnen the radio stops recewing.
No -
Tick "y‘ " to turn on the tone. Untick "v " to turn ottthe tone
Procedure:
1 Press [Menu] Key to access tne menu
2 Press [A/V] key to select "Settings"and press [OK] key
3 Press [A/V1key, seiect'PromptTone'end press [OK] key
4. Press [A/V] key to seiect "Group Catt Tone"and press[OK] key
5 Press [A/V] key to seiectthe desired sub-menu and press
53
54
View the setting of menu function and operation
[0k] key
Press [A/V] key to select "ON / 0FF"and press [OK] key
Press [A/V] key to select "ON" or "OFF“and press [OK] key.
The dlsplay returns to the previous menu
DR
Press [A V] key to select "Ring Torres“ and press [0k] key
There are different tone nptlons (tone 1—5) hsted on the drsplay
Press [A/V] key to select the deslred tone and press [OK] key
The screen shows "Torte Saved" and backs to the prevtous
menu.
6 Press [Back] to return to the previous menu.
El Call Alert Tones
lt lt is allowed by dealer or system admtnlslralor, users can
set and check the call alert tone through menu display.
Call Alert Tone
Users can turn on or on call alert tone when the radio transmrts
or receives the prlvale call, and select the deslred tone lrom
tone t to tone 5
Procedure:
t Press [Menu] key to access the menu
2 Press [A/V] key to select "Settings“and press [OK] key
3 Press [A/V1key, select "PromptTone'anu press [OK] key
4. Press [A/V] key to select "Call Alert Tone" and press [OK] key
5 There ls call alert tone hst on the drsplay
6. Press [A/V] keyto select the deslled tone and press [OK] key
7 The screen shows "Tone Saved" and packs to the prevlous
men u.
3 Press [Back] to return to the previous menu.
Basic Settings
ll lt is allowed by dealer or system admrnrstrator, users can
set and check basic settings ot your radio through menu
display.
You can set or check the tollowrng baslcftmcllons
. Language
. keypad Lock
. Backlrght
. Version
. Dlsplay Mode
. Encoder knob
. vox
El Language
lt lt is allowed by dealer or system admtnlslralur, users can
set and check language of the radio through menu dlsplay
Language Setting
Yau can select one language from the preset language list
on your radlo to be displayed on your radio
Procedure:
1 Press [Menu] key to access the menu
View the setting of menu function and operation
2 Press [A/V] key to select "Settings" and press [OK] key
3. Press [A/V] key. select "Baslc Settrngs" and press [OK] key
4 Press [A/V] key to select "Language“and press [OK] key
5 There ls drtterent languages llsled on the dlsplay
6 Press [A/V] key to select the desrred language and press
[OK] key
7. The screen shows "Language Selected"and packs to the
prevrous menu.
8 Press [Back] to return to the prevlous menu.
El Keypad Lock
ll rt IS allowed by dealer or system admrnrstrator, users can
set and check the keypad look through menu dlsplay.
Keypad Lock Setting
You can select any mode ol keypad lock aocordrng to your
need. ln case that there ts unnecessary character tnput.
You can select one ol the tollowrng modes ot keypad lock.
. Auloi The keypad wrll be locked when there ts no opelallon
for 1 mln.
. Manual 7 Press [OK] key and then press ['1 key to unlock
the keypad
Procedure:
1 Press [Menu] Key to access the menu
2 Press [A/V] key to select "Settings" and press [OK] key
3 Press [A/V] key, select "East: Settrngs" and press [OKlkey
4. Press [A/V] key to select "Keypad Lock" and press [OKlkey
5 There are dtflerent keypad lock modes on the drsplay.
5. Press [
[OK]key
Press [A/V] key to select "Auto-and press [OK] key
Press [A/V] key to select "ONIOFF"artd press [OK] key
The screen shows "Made Selected" and packs to the previous
/V] key to select the desired mode and press
menu.
OR
Press [A/V] key to select "Manual"and press [OK] key
Press [A/V] key to select "ONIOFF"artd press [OK] key
The screen shows "Made Selected" and backs to the previous
menu.
7 Press [Back] to return to the previous menu.
Note:
Press [OK] key and then press [*1 key to unlock the keypad.
El Bauklight
lt rt is allowed by dealer or system admrnrstrator, users can
set and check the hacklight through menu dlsplay
LCD Ught Mode and Brightness
You can set the LCD lrght mode and lrghtness to save the
power of pottery
You can select trom the tollowrng LCD light mode
e On — the LCD light remalns solid on
55
56
View the setting of menu function and operation
. Off 7 the LCD light is off (there is micro light)
. Auto 7 the LCD light Will he of! automatically when there
is no operation tor more than 1 minute. And it will light when
you press the key or there is Signal received
Procedure:
Press the preset [LCD Light ON/OFF] key to sWitch between
LCD ON or OFF
0R
1 Press [Menu] Key to access the menu
2 Press [A/V] key to select "Settings"and press [OK] key
3 Press [A/V] key, select "Basic Settings" and press [OK] key
4 Press [A/V] key to select "LCD Light" and press [OK] key
5 Press [A/V] key to select the desired subsmenu and press
[OK] key
Press [A/V] key to select "ON/OFF" and presleK] key
The LCD nghl Modes Will be listed on the display
Press [A/V] key to select the desired mode and press [otqkey
The screen shows "Mode Selected" and packs to the previous
menu.
Press [Back] key to returns to the previous menu
OR
Press [A/V] key to select "Brightness" and press [OK] key
Press [A/V] key to select the desired brightness and press
[OK] key
The screen shows "Saved" and backs to the previous menu
5 Press [Back] key to returns to the previous menu
DVersion
it it is allowed by dealer or system administraluri users can
set and check the version oi the radio through menu display
View Version intonation
You can check the version intormation of your radio it needed
Procedure:
1 Press [Menu] Key to access the menu
2 Press [A/V] key to select "Settings"and press [OK] key.
3 Press [A/V] key. select “Basic Settings"and press [0K]key
4 Press [A/V] key to select "Versionvand press [OK] key
5 The screen shows the version inlermation of the radio
a Press [Back] key to returns to the previous menu
El Display Mode
it it is permitted by dealers or system administrator users can
set and check display mode ottheir radio through menu
display
Display mode options:
. Channel No & Name — Channel numoerand preset contact
name will be displayed on screen
. Channel No a. Freq — Channel number and frequency will
be displayed on screen
. Channel No — Channel number to he displayed on screen
View the setting of menu function and operation
Procedure:
l Press [Menu] key to access the menu
2 Press [A/V] key to choose "Settlngs" then press [OK]
3 Press [A/V] key to choose "Others" then press [OK]
4 Press [A/V] key to choose "DispMode" then press [OK]
5 Dlsplay modes list wlll he dlsplayed on screen
5 Press [A/V] key to choose your desired mode and then
press [OK]
7 "Setter!" pops up on screen once the operatlon completed
and back to prevlous menu.
3 Encode switch
lf it ls permitted by dealers or system admlrllstrator‘ users can
set and check encoder switch.
Channel Switch
Users can turn ON or OFF the channel swrtch or press [
keypad lock] key to prevent accidentally press fmm changing
channel.
Procedure:
l Press [Menu] key to access menu.
2 Press [A/V] key to choose "Setllrlgs" then press [OK]
3 Press [A/V] key to choose "Others" then press [OK]
4. Press [A/V] key to choose "Channel Swllch" then press [OK]
5 ON or OFF wl|| he dlsplayed on screen
5 Press [A/V] keyto choose yourdesired set and then press [OK]
7 "Setted" pops up on screen once the pperallon completed
and pack to previous menu
3 vox
lfil ls permitted by dealers orsystern admlnlstraturr users can
set and check vo>< feature and sensltlvity level through menu
display
vex Switch
Users can turn 0N vox, so that they can lnltlate the call
wlthout presslng [Pi-r] key If the rnlerophone wllh vo>< detects
voice, the radlo wrll auto transrnltting untll the microphone falls
to detect voice
Note:
To turn on or off vo>< only be etlectlve against the radio with
vox ON Please contact yourdealer or system admlnlstrator
for more lnlcrrnatlon
Procedure
Press the preset [voxl keyr vo>< will be swrtched between
0N and OFF
0r operate ula following lnstructlon
1 Press [Menu] key to access menu
2 Press [A/V] key to choose "Settlrtgs" then press [OK]
3 Press [A/V] key to choose"01hers"then press [OK]
4 Press [A/V] key to choose "VOX" then press [OK]
5 Press [A/V] key to your desired sub-menus and press [ox]
57
58
View the setting of menu function and operation
Press [A V] key to choose "va SWiton" lnen press [OK ];
"Tum 0n" and "Tum OFF" wrll oe displayed on screen
Press [A/V] key to choose desired set. then press [OK] to
confirm, and pack to previous menu
OR
Press [A/V] key to choose "vox Level" then press [OK ].
"One to Twellth" will be displayed on screen
Press [A/V] key to choose desired level. then press [OK] to
conflrm, and back to prevrous menu
6 Press [Back] to back previous menu.
Note:
9 The nigner level the nigrier sensitivrty [or voice detected
User need to program it accordlng lhe working environmenl.
Restore Factory
ll it is permitted by your dealer or system administrator, users
are allowed to set and restore radios to tatory default from
menu display
Restore fadmy setting
Users can restore some oasic settings to factory delault. il
required
Procedure
l Press [Menu] key to access menu .
2 Press [A/V] key to choose "Setllrlgs" lhen press [OK]
3 Press [A/V] key to choose "Stanacmry" then press [OK]
4 Awamlrlg note will pop up on screen [or your double check
5 Press [OK] agalrl to confirm, and back to previous menu
OR
Press [Cancel] to cancel it and pack to previous menu
5 Press [Back] to back previous menu
I FM Radio
ll it is permitted by your dealer or system administrator. users
can operate or check FM radio lrom menu display
FM radio operation
Users can turn ON orOFF FM radio. and listen to FM program
and save it if required.
Procedure:
1 Press [Menu] key to access the menu.
2 Press [A/V] key to choose "FM Radio" then press [OK]
3 Screen will display received FM lrecuency
Press [A/V] key to seek or select FM frequency
Press [Back] to exit FM radio
on
Press [0k]
Screen vvill display sub-menu options
Press [A/V] to choose your desired option, then press [OK]
- Press [A/V] to choose "Save on" and press [OK]
- FM list saved" will pop up once operation done And pack
to previous menu.
View the setting of menu function and operation
. Press [Back] to exit FM radio
0R
- Press [A V] to choose "Set Saved CH" and press [OK]
. Screen will display a list ot saved FM channels
. Press [A/Vlto choose desired channel tor turtheroperaticn
ll Press [A/V] to choose "Delete" and press [OK] Awarning
note will pop up tor your double check
Press [OK] to conhrm. and a note pops up means operation
done Or press [Cancel] to cancel the operation. and back
to upper menu.
OR
Press [A V] to choose "PLAY" and press [OK]
Screen Will hack to FM radio. and play the selected FM channel.
OR
. Press [A/V] to select "Seek Mode" and press [OK]
. Press [A/V] to choose "Manual" or "Auto" mode. and press
[OK].Thert a note pops up and means operation succeeded.
. Press [Back] to exit FM radio
Note:
9 To choose "Manual" the radio will seek FM radio frequency
by step frequency at 1DOMhz.
9 To choose "Auto" the radio will auto seek FM treouency
Once signal received. it Will stop seeking and start playing
the program
QOnce you are listening to FM program. ityou press P‘l'l'
key. FM radio Wl” be exiled temperately until P‘l'l' released
I Scan
ll it is permitted by your dealer or system administrator. users
can check or operate scan feature through menu display
Scan ON or OFF
Once scan ls enabled. the radlu will start scan cycllcally to
Check if (here ls any activities lrl (he channei under the scan
Ilsl Once Ihe scan ls ON. the LED wilt flash RED. and scan
icon [C] will be displayed on the top ct screen
When mixed modes (analogue and digital) channels under
scanning. it your radio stays on a digital channel. but radio
scans an analogue signal and locked on the channel. then
the radio Will auto sWitch to analogue mode from digital mode
during the calling duration. vice versa.
Scan mode:
When you activate the scan. radio will start scan preset channels
orgroups in the scan list According to your preset. the scan
may start trorn the last active channel or group that being
scanned. or lrom the channel that radio currently stays on
Note:
9 "Talkback" or "Scan TX mode" and "Appointed channels"
etc scan detail settings can be preset by your dealer or system
admtnlstralar
59
60
View the setting of menu function and operation
Procedure:
Press deiined [Scan] key is iurn ON or OFF scan
OR
io turn on or air scan swiicri as peiow.
i Press [Menu] key to access irie menu.
Press [A/V]to choose “Scan" then press [OK].
Screen dispiays subsmenu Options.
Press [A/V]to cnuose “Scan" men press [or].
Scan iisi dispiayed on screen.
(ii-bum
5 Press [A/V]to choose yourdesired iiems and press [OK]
7 "Start scan" and "Disabie scan" wiil be dispiayed on screen
for seieciicn
To choose "Sian scan" and press [OK], a scan icon Will be
dispiayed on screen, and radio back iononie screen
Note
9 Once scan activated, LED Wiii nasn RED and scan icon
[ C ]displayed on screen
OR
To choose "Disable scan“ and press [OK] A nole pops up
on screen and men back to preirious menu
Note:
9 Once Scan is disabled, LED iiiiii be air, and scan icon
[3 1 wiii disappear ircm main screen
Scan mode
if it is permiiied by your deaier or system adminisiraior. users
can check or operaie scan mode inrougn menu dispiay .
5 Scan made setting
You can selectine processing modes when the radio deiecis
signai over the air if needed
OOpiions
. co (carrier) 7 Once radio receives a scanned signal over
the air, ii Win siay on ma cnannei uniii signal disappears, and
Men continue to scanning
a T0 (Tlme) 7 Once ine radio receives a scanned signai
dverine air. iiwm siay on thal cnarinei for a preseuirne. Once
iirne is out, ii wiii coniinue to scanning
. SE (Seek) — Once the radio receives a scanned signal
oiieririe air, ii Win slay on inai channel and stop scanning
uniii you reactivate ic scanning
Procedure:
1 Press [MENU] to access ine menu.
2 Press [A/V] ip choose "scan mode" and press [OK]
3 Sub-menu under scanWiii displays on screen
4 Press [A/V] Io cnocse desired scan mode, and press
[OK].
5 Once cperaiiori is compieied, a noie wii pop up on screen,
and men back is preirious menu
5 Press [Back] is back preiiious menu
View the setting of menu function and operation
fiScan List
Users can preset scan lists and assign them to single channels
or groups Radio will scan cyclically to check illhere is voice
signal on current channel or group Your radio supports up
to 16 scan lists, and each scan can contain a maximum at
sizchanneis Each scan list supports both digital and analogue
modes
ii it is permitted by your dealer or system administrator, users
can edit, add, delete or choose priority channels through menu
display.
El Check Scan List members
Procedure:
1 Press [Menu] to access the menu
2 Press [A/V] to choose "Scan" and then press [OK].
3 Scan subamenu options listed on screen
4 Press[A/V]to choose "scan List" and then press [OK]
5 All Scan lists displayed on screen
5. Press [A/V1to choose desired scan list. and then press[OK].
7 All channels number or name on the scan list will he
displayed on the screen
5 PresslA/V] to check the scan list members
9 Press [Back] to back preVicus menu.
DMd new memberstn the scan list
Promdure:
1 Press [Menu] to access the menu
2 PresslA/V] to choose "Scan" and then press [OK]
3 Scan subamenu options listed on screen
4 Press[A/V] to choose "Scan List" and then press [OK].
5 Scan list items displayed on screen.
5 Press[A/V] to choose desired scan list, and then press
[OK]
7 All channel Numbers or names on the scan list will be
displayed on screen
8 Press[A/V] to choose "ADD CH"
9 Press [OK] The screen Will display the avaliabie channels
Numhers or names for adding
lo Press [A/V] to choose desired channel numberor name
ll. Press [Ok] to add it to scan list, hackle scan member list
OR
Press [Back] to back to scan list.
i2. Press [Back] to back previous menu.
Note:
9 IV you wish to continue to add new members. please repeat
the above steps from etc 11
El Priority Channel or disable priority channel.
Procedure:
i Press [MENU] to access the menu.
2 Press [A/V] to choose "Scan" and then press [OK]
61
62
View the setting of menu function and operation
3 Scan sub—menu options lisled on screen
4 Press [A/V] lo choose "Scan List" and then press [OK]
5 Scan list items displayed on screen
a Press [A/V] to choose deslred scan list. and then press
[OK]
7 All channel Numbers or names on the scan list will be
displayed on screen
8 Press [A/V] to choose desired channel number or name.
and press [OK]
9 Press [A/V] to choose lhe desirect option
Press [A V] to choose "Set Pricrl" and press [0K10nce
operation completed. a note Will pop up on screen And then
back in scan member lisl
OR
Press [A/V]Io choose "Disable FricH" and press [OK]. Onoe
operation completed, a note Will pop up on screen And then
back to scan member list.
to Press [Back] to back to preirious menu
Note:
9 The Priority icon "P" appears next to the channel in the
scan list, to indicate the channel is a priority channel You can
have ONLY one priority channel in a scan list
9 ltthe priority channel is to be disabled. then the icon "P"
will be disappear
3 Delete scan list member/ members
lla channel keeps no actiVities or no signals (called
"Useless"channel) during scan. you can delete it temporarily
from the scan list
Procedure:
l Press [MENU] to access the menu.
2 Press [A/V] lo choose "Scan" and lhen press [OK]
3 Scan subrmenu options listed on screen
4 Press [A/V] to choose "Scan List" and then press [OK]
5 Scan list items displayed on screen
6 Press [A/V] to choose desired scan \lsl. and then press
[OK].
7 All channel Numbers or names on the scan lisl Will be
displayed on screen.
5 Press [A/V] to choose desired channel number or name.
and press [OK]
9 Scan subrmenu options lisled on screen.
to Press [A/V] lo choose "Delete" and press [OK]
it. Once operation completed, a note will pop up on screen
12 And then back to scan list
is. Press [Back] to back to preVious menu.
Note
9 ltyou Wish to continue to delete other "Useless" channel,
please repeat lhe above procedures lrom a to t2
View the setting of menu function and operation
0 ll channel numbers or names to be deleted. it will exit
the scan list When you start scan. you iivill not scan them
again. unless you add them to the scan lisl again
I To preset scan via programming software
You. Your dealer or system administrator can program the
talkback modes or transmitting types during scanning vra
programming software.
'Talkback and transmitting types
Your radio will stay on an active channel or group talk during
scan. the time period when radio stays on the channel or
group talk is called "idle time"
© You can preset the talkback and transmitting types via
sottware
- Talltback
Q). llsortware presets it ON. when a carrier signal on the scan
list is received during scan. and disappear in 3s later. Press
[P‘l'l'] button to reply the current channel member scanned
@. ll sortware presets it OFF. you can set the transmitting
reply made through [Scan transmitting mode].
Note:
9 Options: ONIOFF
o Delault ON
- Sean transmitting mode
Q). Start channel 7 To reply call before scan initiated
:2) Last active channel 7 To reply call on last previous active
channel
® Appointed channel 7 To appoint a channel to reply call
. Appointed channel
it to choose appointed channel lor reply. when your radio
receives a carrier signal scanned on a scan list during scanning.
and when the signal disappears. press [PTT] to reply the call
on that appointed channel
64
General guide for fault handling
Malfunction
Analysis of causes
Handling method
Fall to turn 0N radio
Battery is installeo incorrectly
Reslnstall battery
Battery power lower than preset value
Please change or charge battery.
Bad battery contacts or contacts in dlrty.
Check and Clear the battery Contacts.
The sound get lower or unclear
or interrupted during receiving
signal
Battery power get lower
Please change or charge battery.
Volume control at low Value.
Aoyust the volume to be higher.
Antenna gets loose or antenna lreouency
is incorrect
Power off radio. and reinstall antenna.
or change antenna With right lreouency.
Speaker is blocked or damaged
Try to clear the outer speaker or contact
your dealer.
Using the radlo unoer poor working environment
or electromagnetic interterenoe
Change working environment or shilt
antenna oirection
Fail to talk with group members
The current working channel frequency or
signaling setting is diflerent with other group
members
Change channel or reset signaling to be
same as other group members
The setting of Digital or analogue channel is
incorrect.
Reprogram the current digital or analogue
channel.
Far away with that group members
Get closer to that group members.
Pops up other communication or
noise on the current channel.
To be Interfered by Dlher members
To change lrequency or channel
Did not program With relevant signaling
To program signaling for the group member to
prevent same treq uency interference.
Louder noise during
communication
The communicalion distance is I00 far
between members.
Get closer to other members
To be blocked by high builoing, or be onlower
langtorm or basement etc working environment.
Go tor open air area, and turn on radlo again
tor a try
General guide for fault handling
Malluncfion
Analysis of causes
Handling method
Louder noise during
commumcanon
To be mterfered strongly by externat
environment or others
Try to keep away with Instruments or
equipments wmen may cause mlerference.
cps tau lo posmonmg (Opttonat)
Radm without GPS fealure, Or \S warkmg
under poor workmg enwmnment mauaits
to receive GPS signat.
To add GPS lealures or move to work m the
open air.
Note: ll the above methods fat‘ to solve your problem, or you confronl olher dtlferenl malfunctions, please conlacl your local
dealer or appoimed maintenance statmn for more supports
65
66
Maintenance and Clean
To make sure lhe radio's besl performance and prolong ils
worklng lile please be acquainled wlth lhe follcwlng wnlenls‘
so that you can do well malntenance and clean lor lhe radlo.
MaiMlenanoe
@ Please do not scratch or puncmre lhe device with hard
mailer
@ Please do not place the devlce under lhe environment
which can corrode electronlc circun or under sun direct
radiallon
@ Please do nol carry lhe device by handlng lts anlenna or
headseL
@ Please make sure lhe SP-MIC be covered well M ii is not
In use
Clean
Please clean your devlce regularly by uslng dry laid lahnc or
soft brush lo wlpe lhe dusl on surlace and charger comacls.
The keypads, conlrol knob and houslng case of the device
are easy gel dirty. Please use nonwoven wipes to clean lhem.
Please do nol use chemical lo clean ll such as detergent
alcohol, spray or petroleum products or lhe devlce surlace
or prlming characler maybe damaged Belore power on the
radio please make sure lhe devlce is dry complelely
Standard accessories
AC Adaptor
Amenna
Charger Lwrpol Eatlery
Bell Chp Tie
67
68
Optional accessories
Av conduit earphone
Programmable cable
Earphoner‘W
Power supp‘y for car charger
Earphonerz
Speaker mxcrophone
Kydera®
PROFESSIONAL DIGITAL TWO-WAY RADIO

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Author                          : XM156
Create Date                     : 2016:06:23 17:28:53+08:00
Modify Date                     : 2016:06:23 18:00:11+08:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Metadata Date                   : 2016:06:23 18:00:11+08:00
Creator Tool                    : PScript5.dll Version 5.2.2
Format                          : application/pdf
Title                           : DM 8500说明书 英文 20160616.pdf
Creator                         : XM156
Document ID                     : uuid:26f141f1-01f1-415d-adae-a011ca776853
Instance ID                     : uuid:54ca491b-2087-434a-b1a8-8e2003913d5a
Producer                        : Acrobat Distiller 9.0.0 (Windows)
Page Count                      : 36

EXIF Metadata provided by EXIF.tools