FUJIAN NEW CENTURY COMMUNICATIONS IP-VU1A Handheld Two Way Radio User Manual USER S MANUAL 1
QUANZHOU CITY NEW CENTURY COMMUNICATION ELECTRONICS CO.,LTD. Handheld Two Way Radio USER S MANUAL 1
Contents
- 1. User manual I
- 2. User manual II
User manual II
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1686197 |
| Application ID | lV3aMU2yt/sHNsOg779x3Q== |
| Document Description | User manual II |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 229.05kB (2863135 bits) |
| Date Submitted | 2012-04-30 00:00:00 |
| Date Available | 2012-04-30 00:00:00 |
| Creation Date | 2012-04-27 15:58:46 |
| Producing Software | Acrobat Distiller 7.0.5 (Windows) |
| Document Lastmod | 2012-04-27 17:07:18 |
| Document Title | USER'S MANUAL_1.pdf |
| Document Creator | PScript5.dll Version 5.2.2 |
| Document Author: | Administrator |
MENU SETUP Setting transmitting VOX ON or OFF and VOX sensitivity level 1. Press [MENU] and then rotate the channel knob [ENC] to menu no, [07] ,the LCD will display: Menu Number (Flickering) a? Selection indicator 4 —> VON Setting item UFFff Current value 2‘ Press [MENU] again, LCD display: B? VEIN —> OFF 3‘ Rotate the channel knob [ENC] to select your desired VOX ON or OFF, meanwhile, to set the set VOX sensitivity level. 4\ Press [MENU] to confirm and store the current setting value and continue other setting, or press [EXIT] to cancel the setting and exit the menu mode at the same time. Setting Wide or Narrow band made (WN) 1\ Press [MENU] and then rotate the channel knob [ENC] to menu no. [08] , LCD will display: Menu Number (Flickering) . . . 98 Selection indicator 4- —> LIN —— Setting item HIDE—— Current value 2‘ Press [MENU] again, LCD display: 98 NH —> HIDE St Rotate channel knob [ENC] to select your desired working mode. 4‘ Press (MENU) to confirm and store the current setting value and continue other setting, or press [EXIT] to cancel the setting and exit the menu mode at the same time. 15 MENU SETUP Setting the voice annunciation language (VOICE) to Press [MENU] and then rotate the channel knob [ENC] to menu no. [09] ,LCD will display: Menu Number (Flickering) Selection indicator 4 —> VOICE Setting item ENGLSH» Current value 2, Press [MENU] again, LCD display: B9 VOICE —> ENGLSH 3\ Rotate the channel knob (ENC) to select your desired operating voice annunciation language. (OFF, ENGLISH, CHINESE) 4\ Press [MENU] to confirm and store the current setting value and continue other setting, or press [EXIT] to cancel the setting and exit the menu mode at the same time. Setting time of advert before time-out transmitting termination 1\ Press [MENU] and then rotate the channel knob [ENC] to menu no. [10] , LCD will display: Menu Number (Flickering) Selection indicator 4 —> TDFI Setting item 0FF—— Current value 2\ Press [MENU] again, LCD display: 18 we —> EIFF 3\ Rotate channel knob [ENC] to select the time of advert. (OFF, 1 minute,2. 3, 4‘ Press (MEN to confirm and store the current setting value and continue other setting, or press [EXIT] to cancel the setting and exit the menu mode at the same time 15 MENU SETUP Setting keypad beep ON or OFF 1c Press [MENU] and then rotate the channel knob (ENC) to menu no. (111 ,LCD will display: Menu Number (Flickering) 11 Selection indicator <— —> BEEP—— Setting item Elli—7 Current value 2c Press [MENU] again, LCD display: 11 BEEP —> UN at Rotate the channel knob [ENC] to select the keypad beep ON or OFF. 4\ Press [MENU] to confirm and store the current setting value and continue other setting. or press [EXIT] to cancel the setting and exit the menu mode at the same time. Setting power on message 1‘ Press [MENU] and then rotate the channel knob (ENC) to menu no. [12] ,LCD will display: Menu Number (Flickering) 12 Selection Indicator 4 —> PONHSG Setting item MSG —— Current value 2‘ Press (MENU) again, LCD display: PDNMSG —> MSG St Rotate the channel knob [ENC] to select the desired Power ON Message.(0FF, BAT-V, MSG) 4\ Press [MENU] to confirm and store the current setting value and continue other setting, or press [EXIT] to cancel the setting and exit the menu mode at the same time. 11 MENU SETUP Setting busy channel lockout ON or OFF (BCL) 1. Press [MFNU] and then rotate the channel knob [FNC] to menu no. [13] ,LCD will display: Menu Number (Flickering) Selection indicator « —> BCL Setting item EIFF Current value 2\ Press (MENU) again, LCD display: 13 BEL —> OFF 3‘ Rotate the channel knob (ENU) to select auto—lock keypad ON or OFF. 4‘ Press [MENU] to confirm and store the current setting value and continue other setting. or press [EXIT] to cancel the current setting value and exit the menu mode at the same time. Setting keypad lockout automatically or manually ON or OFF (AUTOLK) 1t Press [MENU] and then rotate the channel knob (ENU) to menu no. (14) , LCD will display: Menu Number (Flickering) 14 Selection indicator 4- —> RUTDLK Setting item DFF Current value 2‘ Press [MENU] again, LCD display: 14 HUTULK —> OFF 3. Rotate the channel knob [ENC] to select auto keypad lockout ON or OFF. 4\ Press [MENU] to confirm and store the current setting value and continue other setting, or press (EXIT) to cancel the current setting value and exit the menu mode at the same time. 18 MENUSETUP Setting receiving CTCSS (R-CTC) 1. Press [MFNU] and then rotate the channel knob lFNC] to menu no, [15] ,LCD will display: Menu Number (Flickering) 15 Selection indicator 4— —> R—CTC—— Sailing item 254. [HZ—7 Current value 2. Press [MENU] again, LCD display: 15 R-CTC —> 254. IHZ St Rotate the channel knob [ENC] to select the desired receian CTCSS code.(OFF, 67.0Hz ...254.1Hz) 4‘ Press [MENU] to confirm and store the current setting value and continue other setting, or press [EXIT] to cancel the current setting value and exit the menu mode at the same time. Setting transmitting CTCSS (T -CTC) 1‘ Press [MENU] and then rotate the channel knob [ENC] to menu no. [16] , LCD will display: Menu Number (Flickering) Selection indicator <— —> T—CTC—— Setting item 254. tHZ—— Current value 2‘ Press (MENU) again, LCD display: 16 T—CTC » 254. 1HZ at Rotate the channel knob [ENC] to select the desired transmitting CTCSS code.(OFF, 67.0Hz ...254.1Hz) 4\ Press [MENU] to confirm and store the current setting value and continue other setting, or press [EXIT] to cancel the current setting va ue and exit the menu mode at the same time. 19 MENU SETUP Setting receiving DCS (R-DCS) 1. Press (MFNU) and then rotate the channel knob [FNC] to menu no. [17] , LCD erI display: Menu Number (Flickering) Selection Indicator <—~ —> R—DCS Settmg |tem DBZSN Current value 2\ Press (MENU) again, LCD display: 1? R-DCS —> DB23N 3t Rotate the channel knob [ENC] to select the desired receiving DCS code.(0FF, D023N ...... D754N, D023I ...... D754I) Note: N=Nonna|, I=Reverse. 4\ Press [MENU] to confirm and store the current setting value and continue other setting, or press [EXIT] to cancel the current setting value and exit the menu mode at the same time. Setting transmitting DCS code(T-DCS) 1‘ Press [MENU] and then rotate the channe knob [ENC] to menu no. [18] , LCD will display: Menu Number (Flick 1.9 Selection indicator <—~ —> T—DCS—— Setting item DBZSN —— Current value 2\ Press [MENU] again, LCD display: ering) 18 T-DCS —> DBQZN 3t Rotate the channel knob [ENC] to select the desired transmitting DCS code.(0FF, DOZSN ...D754N, D023I...D754|) Note: N=Normel, I=Reverse. 4. Press [MENU] to confirm and store the current setting value and continue other setting. or press [EXIT] to caan the current setting value and exit the menu mode at the same time. 20 MENUSETUP Note: The CTCSS and DOS function can not be activated atthe same time. If you activate the CTCSSHiirst, and then open the DCS iunction, the CTCSS iunction will be closed automatica y. Setting audio tones (APRO) 1\ Press (MENU) and then rotate the channel knob [ENC] to menu no. [19] , LCD WI|| display: Menu Number (Flickering) 19 Selection indicator 4 —> nPRU Setting item UFFff Current value 2, Press (MENU) again, LCD display: 19 nPRO —» OFF 3\ Rotate the channel knob [ENC] to select desired audio tones.(OFF, COMP---compander,SCR--—scrambler) Note: The COPM and SCR cannot be active at the same time. 4\ Press [MENU] to confirm and store the current setting value and continue other setting, or press (EXIT) to cancel the current setting value and exit the menu mode at the same time. Setting the voice scrambler group (SCR-NO) 1\ Press [MENU] and then rotate the channel knob [ENC] to menu "04 (20) , LCD Wi” dismay: Menu Number (Flickering) 28 Selection indicator 4—0 —> SCR—NIJ ffi Setting item 7—— Current value 2\ Press (MENU) again, LCD display: 2a nPRo —» OFF 3‘ Rotate the channel knob [ENC] to select the desired scramble group.(1,2,3, 4 ...... 8) 4. Press (MENU) to confirm and store the current setting value and continue other setting, or press (EXIT) to cancel the current setting value and exit the menu mode at the same time, 21 MENUSETUP Setting Scan mode (SV-REV) 1 Press [MENU] and then rotate the channel knob (ENC) to menu no. (211 ,LCD will display: . . Menu Number (Flickering) 21 Selection indicator < $ SCI—REE __ Setting item Current value 2\ Press (MENU) again, LCD display: 21 SIS-REV —> CD 3, Rotate the channel Knob [ENC] to select the desired scan mode. (CO---Carrier-Operated mode, TO---T|me-Operated Mode, SE---Seek mode) 4s Press [MENU] to confirm and store the current setting value and continue other setting, or press [EXIT] to cancel the current setting and exit the menu mode at the same time. Setting PF1 button Function Definition 1, Press [MENU] and then rotate the channel knob [ENC] to menu no. (22) ,LCD will display: Menu Number (Flickering) 22Pi=1 Selection indicator “' _’ 77 Setting item Rt-‘iDID __ Current value 2\ Press [MENU] again, LCD display. 22 PF! —> RfiDID 3‘ Rotate the channel knob [ENC] to select the PF1 button function.(OFF, RADIO. CALL, SCAN, LAMP---backlight) 4‘ Press [MENU] to confirm and store the current setting value and continue other setting, or press [EXIT] to cancel the current setting and exit the menu mode at the same time. 22 MENU SETUP Setting Frequency/Chan"cl/Message display mode (CH-MDF) 1c Press [MENU] and then rotate the channel knob [ENC] to menu no [23] , LCD will disp ay: Menu Number (Flickering) 23 Selection indicator 4 aCH—NDF Setting item FREQ—— Current value 2\ Press [MENU] again, LCD display: 23 CH-MDF —> FREE! 3‘ Rotate the channel knob (ENC) to select display mode. (CH= channel mode, FREQ: frequency mode, CHFREQ= to display both channel and frequency, Name=se|f~prcgram message) 4\ Press (MENU) to confirm and store the current setting value and continue other setting, or press [EXIT] to cancel the current setting and exit the menu mode at the same time. Setting Backlight ONIOFF (ABR) 1\ Press [MENU] and then rotate the channel knob (ENC) to menu no. [24] ,LCD will display: Menu Number (Flickering) Selection indicator 4— —24 nBR —— Setting item UN —— Current value 2\ Press [MENU] again, LCD display: 24 QBR —> UN 3\ Rotate the channel knob [ENC] to turn ON or OFF the backlight. 4\ Press [MENU] to confirm and store the current setting value and continue other setting, or press [EXIT] to cancel the current setting and exit the menu mode at the same time. 23 MENU SETUP Setting Backlight Color (COLOR) 1\ Press [MENU] and then rotate the channel knob [ENC] to menu no. (25) ,LCD will display: Menu Number (Flickering) 25 Selection indicator 4- —> CDLDR—— Setting item 3 —— Current value 2L Press (MENU) again, LCD display: 25 COLOR —> 3 3x Rotate the channel knob (ENC) to select backllght color (1=Purple, 2=Blue, 3=Orange). 4‘ Press [MENU] to confirm and store the current setting value and continue other setting. or press [EXIT] to cancel the current setting and exit the menu mode at the same time. Setting Offset frequency (OFFSET) 1‘ Press (MENU) and then rotate the channel knob [ENC] to menu no. [26] ,LCD will display: Menu Number (Flickering) Selection Indicator 4. Setting item Cu rrent value 2‘ Press [MENU] again, LCD display: 26 OFFSET —> 18. 896 3‘ Rotate the channel knob [ENC] to select different value between receiving and transmitting, offset frequency. (It can be inputted directly via Keypad). (00.000Mhz ...... 99.950Mhz) Note: To set the offset frequency, it should be under frequency mode. 4‘ Press [MENU] to confirm and store the current setting value and continue other setting. or press [EXIT] to cancel the current setting value and exit the menu mode at the same time. 24 MENU SETUP Setting Offset frequency Direction (OFFSET-D) 1. Press [MENU] and then rotate the channel knob [ENC] to menu no. [27] ,LCD will display: Menu Number (Flickering) 2? Selection indicator 4— —> SFT—D—— Setting item 0FF—— Current value 2. Press [MENU] again, LCD display: 27 SFT—D —> OFF 3. Rotate the channel knob [ENC] to select direction of offset frequency. (OFF, +,-) 4. Press (MENU) to confirm and store the current setting value and continue other setting. or press (EXIT) to cancel the current setting value and exit the menu mode at the same time. Setting Stopwatch ONIOFF (SECOND) 1‘ Press [MENU] and then rotate the channel knob (ENC) to menu no. [28] ,LCD will display: Menu Number (Flickering) Selection indicator <— £8 SECOND —7 Setting Item OFF —— Current value 2\ Press [MENU] again, LCD display: 28 ssruun —» OFF 3. Rotate the channel knob [ENC] to turn ON or OFF the stopwatch Note: Once your turn on the stopwatch, please press ”#" to active the stopwatch function. 4\ Press [MENU] to confirm and store the current setting value and continue other setting, or press (EXIT) to cancel the current setting va ue and exit the menu mode at the same time. 25 MENU SETUP Channel naming (CHNAME) 1. Press [MENU] and then rotate the channel knob [ENC] to menu no. [29] ,LCD will display: Menu Number (Flickering) 29 Selection indicator < —> CHantiE Setting item ——————— — Current value 2. Press (MENU) again, LCD display: CHNRF‘IE 3. Rotate the channel knob [ENC] clockwise to select message content. Contrarotate the channel knob [ENC] to go on next letter or grapheme. Note: The function is disab e under frequency mode. 4\ Press (MENU) to confirm and store the current setting value and continue other setting. or press [EXIT] to cancel the current setting and exit the menu mode at the same time. Storing Receiving Channel (MEM-CH) 1‘ To input the desired receiving frequency first, and select the desired receiving function (such as CTCSS or DCS. COMP or SCR etc). Then press [MENU] and rotate the channel knob (ENC) to menu no. [30] . LCD will display: Menu Number (Flickering) 38 Selection indicator 4 > HEM—CH Setting item 833 —— Current value 2. Press [MENU] again, LCD display: HEM-CH ~> B33 at Rotate the channel knob [ENC] to store the desired channel number. (Note: Displayed "033" indicates available channel number. Displayed "CH—033" indicates a receiving channel number is stored alread , it cannot store any receiving channel again.) 25 MENU SETUP 4t Press [MENU] again, LCD display: 39 * gfifiag‘; _ Refers to successful storage st Press [MENU] to store same transmitting frequency. LCD display: 39 MEN—CH —’ CH—ESS 6\ Press [MENU] to confirm and store the current transmitting channel and continue other menu setting, or press (EXIT) to caan the current setting value and exit the menu mode at the same time. Setting Transmitting Channel (MEM-CH) 1t To input the desired transmitting frequency first. and select the desired receiving function (such as CTCSS or 003, COMP or SCR etc). Then press [MENU] and rotate the channel knob (ENC) to menu no. [30] , LCD will display: Menu Number (Flickering) Selection indicator< —> HEM—CH Setting item CH—BBB 77 Refers to current stored receiving channel no. 2t Press [MENU] again, LCD displa ‘S 39 HEM-CH —> (SH-833 3\ Rotate the channe knob [ENC] to store the desired transmitting channel number. (Note: Displayed "033" indicates a receiving channel number is stored a ready,you could store or cover the original transmitting channel.) 21 MENU SETUP 4t Press (MENU) again, LCD display: NEM-CH - - Refers to successful transmitting _’ CH'933 __ channel storage 5t Rotate the channel knobb [ENC] 0 continue other setting, or press [EXIT] to exit the menu mode. Deleting Stored channel 1t Press [MENU] and then rotate the channel knob [ENC] to menu no. (31) , LCD will display: Menu Nulmber (Flickering) 31 Selection indimtor 4 > DEL—CH Setting item CH—833 —— Current stored channel 2. Press (MENU) again, LCD display: DEL—CH —’ CH—833 3t Rotate the channel knob (ENC) to delete the desired channel. (Note: The available channel cannot be deleted.) 4‘ Press [MENU] to confirm and store the current setting value and continue other setting, or press [EXIT] to cancel the current setting and exit the menu mode at the same time. Resetting factory default or delete all operation (RESET) 1. Press (MENU) and then rotate the channel knob (ENC) to menu no. (32) , LCD will display: Menu Number (Flickering) 32 Selection indicator 4—- » RESET —— Setting item VFD — Factory default mode 2‘ Press (MENU) again, LCD display: 28 MENU SETUP 32 RESET —> VFEI at Rotate the channel knob [ENC] to select the desired operation. (VFO= Resume to factory default; ALL= Delete all storage.) Note: Once you operate I‘ALL", all the stored channel and function will be deleted. 4\ Press [MENU] again, LCD display: 32 RESET —> SURE? 5. Press [MENU] tooonfinn orpress (EXIT) townoeltheoperationLCD display: 32 RESET —> HQIT j—Waiting Scanning CTCSS or DCS (SON CD) Note: only received a carrier signal. the transceiver can perform CTCSS or DCS scanning. if there is no carrier signal received, the CTCSS and DOS scanning can not be activated 1‘ Press [MENU] and then rotate the channel knob [ENC] to menu no. [33] , LCD will display; Menu Number (Flickering) Selectionindimtnr 4 4- SCN CD Setting item CTCSS —— CUrrent value 2\ Press (MENU) again, LCD display: 33 SCH CD 4» CTCSS St Rotate the channel knob [ENC] to scan the desired CTCSS or DCS. 4‘ Press [MENU] to confirm the scanning, or press (EXIT) to cancel the operation and exit the menu mode at the same time. 29 MENU SETUP Emergency calling band A or B operation (SOS-CH) 1» Press [MENU] and then rotate the channel knob [ENC] to menu no. [34] , LCD will display: Menu Number (Flickering) 34 Selection indicator 4 —> SOS—CH Setting item CH—B —— The current calling band “B" 2. Press [MENU] again, LCD dlsplay: SOS—CH —> CH—B 3‘ Rotate the channel knob [ENC] to select the desired emergency calling band. 4 Press [MENU] to confirm, or press (EXIT) to cancel the operation and exit the menu mode at the same time. Available CTCSS Tone Frequencies OFF 91.5 127.3 167.9 199.5 254.1 67.0 94.8 131.8 171.3 203.5 69.3 97.4 136.5 173.8 206.5 71.9 100.0 141.3 177.3 210.7 74.4 103.5 146.2 179.9 218.1 77.0 107.2 151.4 183.5 225.7 79.7 110.9 156.7 186.2 229.1 82.5 114.8 159.8 189.9 233.6 85.4 118.8 162.2 192.8 241.8 88.5 123.0 165.5 196.6 250.3 30 MENU SETUP MENU SETUP The Available 005 Code (Norma|“N") KEYBOARD SHORTCUT OPERATION OFF 053N 131N 205 N 261 N 343 N 432 N 516 N 645 N ITEM shortcut Operation Function description 017N 054N 132N 212 N 263 N 346 N 445 N 523 N 654 N ”WWW “99 PmsslMENUlWl Change ”WWW Adjusfisqueldi level Press MENU +02 8 uelch sensibili °?3N °65N 13? N 323 N ?6,51N ,351 N 44,6 N 5,2? N ‘fis? N Save power PressIMENUIma "Signals mmwmugenmepm 025N u71N 143 N 225 N 255 N 355 N 452 N 5.52 N 554 N TXpower Press MENU1+04 High I,“ mammgn 026N 072N 145 N 226 N 271 N 364 N 454 N 546 N 703 N Roger beep Press[MENU]+05 WIlI nofily lhe atherpanyafiern-ansmlnln 031N 073N 152 N 243 N 274 N 365 N 455 N 565 N 712 N ”lime—out timer Press[MENU]+06 The longest time for single transmifling 032N 074N 155 N 244 N 306 N 371 N 462 N 606 N 723 N VOX fundim Press MENU1+°7 Tum °" °'°“V°X “nsibi'fiy 036N 114N 156 N 245 N 311 N 411 N 464 N 612 N 731 N NNV band Press[MENU]+OB Narrmv orwlde band oommunlcailon VOICE Press MENU]+09 Chinese or English Pmnundanon 043N 115N 162 N 246 N 315 N 412 N 465 N 624 N 732 N Transrnliflng averflme wemlng Press MENU]+10 Transmitting avertime weming(Minutes) 047N 116N 155 N 251 N 325 N 413 N 466 N 527 N 734 N Beep pmssIMENUIHI mm on omfimp sound 050N 122N 172 N 252 N 331 N 423 N 503 N 631 N 743 N Power on message Press MENU]+12 Message showed eerr power on 051N 125N 174 N 255 N 332 N 431 N 506 N 632 N 754 N BCL Press MENU1+13 TMSMNNW Is WNW during '°°°IVI"9 Keypad Iod( Press[MENU]+14 Automatic or manual The Available DCS Code (Reverse"|") RXCTCSS PresslMENUl+15 Receiving CTCSS OFF 0531 131 I 205 I 261 l 3431 4321 516 I 645 I 53253 smsmzzflfig mflmfigm ress + N'nQ 017I 054 | 132 I 212 I 263I 346I 445i 523i 654 I TXDCS Press MENU]+1B Transmitting DOS 023| 065 I 134 | 223l 265l 351 I 446i 526i 662 | Audlotones Press MENU1+19 OFF, COMP, SCR 025 | 071 1 143 | 225 | 266 I 356 I 452 I 532 I 664 | Privacy calling Press MENU1+20 1-B Groups 026 I 072 I 145 I 226 I 271 l 364 I 454 I 546 I 703 I Seen resume method Press[MENU]+21 TOICO/SE 031 | 073 | 152 | 243 | 274 I 365 | 455 | 565 | 712 | Side key definalion Press[MENU]+22 Turnoif, FMradio, Calling, Backllght Display mode Press MENU]+23 Channel, Frequency. Chennelfirequenc 032| 0741 155i 244i 306i 371 I 462i 606i 723I Automatic backlight Press[MENU]+24 Aulomalicortumofi 036I 11“ 156I 245I 311 I 411 I 46“ GIZI 731 I Three background colors Press[MENU]+25 1.Purple.2.Blue.3.0range 043 I 115 | 162 I 246 I 315 I 412 I 465 I 624 I 732 I onsetfrequency Press[MENU]+26 Ofiseurequsncy belweenRXand TX 047| 116 I 165 | 251 | 325l 413i 466l 627i 734 | Onsetdlrecnon Press[MENU]+27 +,- 050I 122 I 172 I 252 I 331 I 423i 503i 631 I 743I SIOPWSIGh Wilt" P'GSSIMENUI‘fZB Tumonloflslcpwaloh 051 I 125 I 174 I 255 I 332 I 431 I 506 I 632 I 754 I Channel naming Press[MENU]+29 Setting channel name Memory Channel Press[MENU]+30 Memory RX, TX channel Delete Channel Press[MENU]+31 Delete memory channel Rm iafinry Haul! semingldear all Pms[MENU]+32 Remus. ramnry default setting nr dear all CTCSSIDCS scan Press[MENU]+33 CTCSS / DCSscan SOS channel Press[MENU]+34 Designate band A or B as SOS diannel 31 32 MISCELLANEOUS FUNCTION REMAINING BATTERY CAPACITY Before you operate the transceiver outside using a battery pack. it is important to know how long the battery pack will last. The battery remaining indicator shows the remaining capacity. "" High battery power in Medium battery power ‘l - Low battery power l Recharge or replace the batteries. WIRED CLONE The steps to active wired clone: 1. Turn on the power of the vice radio, and then connect the two radios with cloning cable, 2. Press [MONI] key ofthe master radio to turn on the power. while "CLONE?" appears on the master radio, then release (MONI) key. 3. Press (FUNCI key and then begin cloning. During cloning process, master radio shows "CLONE"and the red light blinks, while vice radio doesn’t refresh showing, and green light blinks. Untill the red light of the master radio changes from blinking to bright all the time, "SUCCESS" will appear on the master radio, which means cloning successfully. 4. During the data transmission. it "ERROR" appearing on the master radio means failing to clone, then please check whether the cloning cable connects well or not. then press IFUNC) key of master radio. Single I Double stand-by Switching Press and hold (NB) for 2 seconds. the transceiver will switch to single stand- by or double stand-by mode. (* SCAN] Function A short press means turning on or off reverse frequency, while pressing for 2 seconds means activating Scan feature. [# LOCK] function A short press means turning on or pause Stopwatch. while long press means turning on or oft keypad lock. 1750Hz calling Press PTT button and MONI key together to make a call, the transceiver will sound 1750Hz testing audio, while releasing the buttons will stop calling. 503 alerting In an emergency situation, the transceiver can send out ‘hoct.." sound for help via designated channel or frequency on Band A or B, and meanwhile. the radio 33 MISCELLANEOUS FUNCTION itself makes “hoot..." sound and backlight flashes. The emergency call lasts for 10 seconds every time and the interval is 5 minutes During SOS transmitting, you can press any key to exit, however, if there is a carrier signal appears, the transceiverwill get into rewiving, and SOS-CH will continue after signal disappeared. FM Radio Turn on FM radio Under stand-by mode, press (PF1] key to turn on FM radio. (Setting PF1 to Radio) Adjust FM radio channels While FM radio is on, press (* SCAN] key, the FM radio will adjust channels automaticlly and flash green till a FM radio channel is searched; you can also have a adjustment on the searched channels by rotating ENC. Store FM radio channels When there is a FM radio channel being searched, press (MENU) key, the LCD displays ‘save’1', then press any numeric key (1-9) to store the searched channel for future use. in the transceiver, there are two groups FM radio channels for storage The transceiver is default to be in the TEAM 1 during storing, you can press (# LOCK] key to switch over TEAM 1 and TEAM 2. Callout use of stored FM radio channels Press numeric key to callout and listen to your stored channel when the FM radio is turned on. Optional slgnallng There are three optional signalings in iP-VU1A; MSK, 2-Tone, 5-Tune; every optional signal has 8 groups of decoding sets, and MSK and 2 Tone have 10 groups of encoding sets, while there is no limit for 5 Tone encoding groups. Except 5-Tone, the encoding and decoding of these optional signalings can only programmed by software. MSK/2 Tone encode manually (PF1 key should be defined as CALL) While press (PF1] key, the LCD displays “MSK/2T?“, you can press numeric key 0-9 to callout corresponding calling list to call; if the corresponding calling list Is not edited, It wlll sound a “D00" Deep. When 2 Tone is encoding, tone A sends for 1 second and tone B sends for 3 seconds; but ifthere is only tone A setted on the calling list, then tone A will send for 5 seconds (in trial use, the transceiver is used as group calling). 5 Tone encode manually (PF1 key should be defined CALL) While press (PF1) key, the LCD displays ‘CALLl----", then input the transceivers decoding groups contents that you want to call, then press P'I'I' button to start calling, 34 MISCELLANEOUS FUNCTION TECHNICAL SPECIFICATIONS SOME SPECIAL KEYS OPERATING INSTRUCTIONS Technical Specifications Model iP-VU1A Frequency Range Type A VHF: 144~146 MHz(TXIRX) UHF: 430~44o MHz(TXIRX) Type a VHF: 136~175 MHz(TXIRX) UHF: 4oo~47o MHz(TXIRX) Type c VHF: 136~175 MHz(TXIRX) UHF: 420~520 MHz(TXIRX) Type D VHF: 136~175 MHz(TXIRX) UHF: 4oo~47o MHz(RX) UHF: 350-400 MHz(RX) Frequency Stability SPPm Battery Voltage DC 7.2V(Chargeable Li-ion Battery) Memory Channel 128 Antenna Configuration Rubber Antenna Antenna Impedance 50 Q 1. EfiBcgdléezhéJes'eg‘goBfl/Atglgggflgl B frequency band; or worked as Working Type SEfgsefi-heglrfnjgniwg‘ijrlfiex . (MENU) key. used for entering into menu operation or as (FUNC) Dimensions 97X5BX40 key; or worked as code “B" under DTMF dialing. 3. [EXIT] key, used for exiting menu operation or cancelling the current operation; or worked as code C in the DTMF dialing.. 4. (PF1) key, used as user-defined operation; or worked as code “D“ under the DTMF dialing“ 5. h] key. used for Reverse Frequency 6. (it) key, used for turn ON/OFF keypad lockout (press and hold for 3 seconds). Once the Stopwatch function is turned on, il is also used as turning ON or OFF the function. Frequency! Channel Display Operation When the transceiver is under the standby mode. press [MENU] and then press IA/B] , the frequency mode and channel mode will be shifted. 35 36 TECHNICAL SPECIFICATIONS Transmitter RF Power Output HIGHZSW LOW20.5W Modulation Type (WIN) 16KFC3E/11K CF3E Maximum Deviation (WIN) <5KHfl<2.5KHz Adjacent Channel Power (WIN) 265dB/260dB Spurious Emission Power <7 u W Pre-emphasis Features GdBIIncreased by Frequency Times Transmit Current <1.6A(5W) CTCSSIDCS Deviation (WIN) 0.5KHzi0.1KHz. 0.3KHzi0‘1KHz Modulation Sensitivity 8-12mV Modulation Distortion <10% Receiver Referenced Sensitivity -122dBm(12dB SINAD) Audio Power > 0,5W Audio Distortion <10% Block 285 Intermodulation (WIN) ZSSdB EGOdB Adjacent Channel Selectivity (WIN) ZGBdB 263dB Spurious Rejection ZSSdB 31 STANDARD ACCESSORIES SUPPLIED ACCESSORIES Item Quantity Antenna Twin Charger Adaptor Li-ion Battery Pack(2300mAh) Belt clip User manual Hand Strap Note:This product is with waterproof rated iP65, we will not undertake any compensation or warranty responsibility for watering or damage caused by using special accessories not sold by us (including related accessories like battery pack, earpieces and so on). 38
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Encryption : Standard V2.3 (128-bit) User Access : Print, Print high-res XMP Toolkit : 3.1-701 Modify Date : 2012:04:27 17:07:18+08:00 Create Date : 2012:04:27 15:58:46+08:00 Metadata Date : 2012:04:27 17:07:18+08:00 Creator Tool : PScript5.dll Version 5.2.2 Format : application/pdf Title : USER'S MANUAL_1.pdf Creator : Administrator Document ID : uuid:a6127141-aec5-48d4-81c5-22222f9d0c85 Instance ID : uuid:44a2f08b-8231-4947-8dd7-ebf5fe800efe Producer : Acrobat Distiller 7.0.5 (Windows) Page Count : 12 Author : AdministratorEXIF Metadata provided by EXIF.tools