FUJIAN NEW CENTURY COMMUNICATIONS TR-6000DM DMR Repeater User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3450977
Application ID	i1qR3hwM4X6UcguVQ+kWMw==
Document Description	User Manual Part 2
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	313.22kB (3915268 bits)
Date Submitted	2017-07-05 00:00:00
Date Available	2017-07-05 00:00:00
Creation Date	2017-05-18 13:24:57
Producing Software	Acrobat Distiller 9.0.0 (Windows)
Document Lastmod	2017-05-18 13:33:37
Document Title	Users Manual
Document Creator	PScript5.dll Version 5.2.2
Document Author:	XM150

entry relers to an alias or lD that you use to make a
call Each contact Will be connected With Group Call.
You radio can support at most 64 Contacts.
Each contact is provided With the followtng information.
a Call type
o Call alias
a Call ID
Note:
Vou can add or delete the user ID for the digital contact
list
View Contact List®
Procedure.
Press the user-delined [Contact] key to access contact
list and proceed to step 4.
0R
Follow the steps below to access contact list.
1. Press [MENU] key or rotate [SELECT] button to
access the menu
2. Rotate [SELECT] button to select "Contact" and
press [OK] key or press [SELECT] button.
3. Rotate [SELECT] button to select "Contact List" and
press [OK] key or press [SELECT] button.
4 Rotate [SELECT] button to choose the desired alias
or ID and press [OK] key or press [SELECT] button.
5. Rotate [SELECT] button to select "Info“ and press
[OK] key or press [SELECT] button.
6. Display Will show the information oia contact, such
as name, numberand attribute.
7. Press [BACK] key to return to the previous menu
Add Contact@
Procedure:
Press the user-defined [Contact] key to access contact
list and proceed to step 4.
OR
Follow the steps below to access contact list.
1. Press [MENU] key or press [SELECT] button to
access the menu.
2. Rotate [SELECT] button to select "Contact" and
press [OK] key or press [SELECT] button.
3 Rotate [SELECT] button to select "Contact List" and
press [OK] key or press [SELECT] button
4 Rotate [SELECT] button to choose the desired alias
or ID and press [OK] key or press [SELECT] button.
24
25
View the setting of menu function and operation
5 Rotate [SELECT] button to select "Add Contact" and
press [OK] key or rotate [SELECT] button.
6. Display Will show the information ofa contact. such
as name. ID number and attribute.
7 Rotate [SELECT] button to select “Name" and press
[OK] key or press [SELECT] button.
8 When a blinking cursor appears, use the keypad of
Microphone to type the name. Or Hold [#] key to change
the input method, which Wl” be shown at the top left
side of the display (at most 9 Characters) ("AB" it
means you are able to type capital letters. “ab" it means
you are able to Input lowercase letters 12" it means
you are able to type numbers from 0 to 9."PY" it means
you are able to type Chinese with Pinyin method. )
9 Rotate [SELECT] button to move one space lo the
left or right.
10. Press [Delete] key to delete any unwanted characters
or use the keypad oi Microphone to type the name
11. press [OK] key or press [SELECT] button to save
the name
12. lt will return to the previous menu.
13. Rotate [SELECT] button to select "ID Number' and
press [OK] key or press [SELECT] button.
14. When a blinking cursor appears, use the keypad
of Microphone to type the ID number. ( al most 8
numbers.)
15. Rotate [SELECT] button to move one space to the
lel‘t or right.
16 Press [Delete] key to delete any unwanted characters
or use the keypad of Microphone to type the ID number.
17. Press [OK] key or press [SELECT] button to save
the lD number.
18. lt will return to the previous menu.
19. Rotate [SELECT] button to select "Save Contact"
and [OK] key or press [SELECT] button.
20. The display Will show "Contact saved"
21 The display Wl” return lo the previous menu
Note:
Vou can save a Contact only when name and ID number
is inputted.
The call type of the added contact must be “Group Call".
El Delete Contact
Procedure:
View the setting of menu function and operation
Press the user-defined [Contact] key to access contact
list and proceed to step 4.
OR
Follow the steps below to delete contact.
1. Press [MENU] key or press [SELECT] button to
access the menu.
2. Rotate [SELECT] button to select “Contact“ and
press [OK] key or press [SELECT] button.
3. Rotate [SELECT] button to select "Contact List" and
press [OK] key or press [SELECT] button
4. Rotate [SELECT] button to choose desired alias or
ID of the the contacts as a private call and press [OK]
key or press [SELECT] button.
5. Rotate [SELECT] button to select "Delete Contact"
and press [OK] key or press [SELECT] button.
6. The display will show "Confirm to delete?"
7 Press [OK] key or press [SELECT] button to delete
Or press [Cancel] key to cancel.
8. The screen will return to the previous menu.
Initiate a call from ContacQ
Procedure:
1. Press the user-defined [Contact] key. The contacts
will be listed alphabetically.
2 Rotate [SELECT] button to choose the desired alias
or ID.
3. Hold the Microphone vertically 2.5cm to Sam (1 to
2 inches) from your mouth
4. Press [PTT] key to initiate a call.
5. The display will show the alias or D and the lCOl’t.
6. You can speak clearly into the microphone until the
"Group Call Tone" ends (if it has been turned on.)
CIR
You can initiate a call from menu
1. Press [Menu] key or press [SELEC‘H button to access
main menu.
2. Rotate [SELECT] button to choose the “Contact"
and press [OK] key or press [SELECT] button
3. Rotate [SELECT] button to choose the "Contact List"
and press [OK] key or press [SELECT] button
4 Rotate [SELECT] button to choose the desired alias
or ID. (The contacts will be listed alphabetically.)
5. Hold the radio vertically 2.5cm to 5cm (1 to 2 inches)
from your mouth.
27
View the setting of menu function and operation
6. Press [PTT] key to lnitlate a call. The display will
show the alias or ID and the icon.
7. You can speak clearly mm the Mlcrophone untll the
"Group Call Tone“ ends (lf it has been turned on.)
" Manual dial " to initiate a group call
Procedure:
1. Press [Menu] key or press [SELECT] button to aooess
main menu.
2. Rotate [SELECT] button to choose the "Contact"
and press [OK] key or press [SELECT] button.
3. Rotate [SELEC'H button to choose the “Manual Dial"
and press [OK] key or press [SELECT] button.
4. When a bllnklng cursor appears, use the keypad to
type the ID number. for a maximum of 8 numbers
5. Rotate [SELECT] button to move one space to the
lefl or nght.
6. Press [Delete] key to delete any unwanted characters
7 Flnish inputting
8. Hold the Microphone vertlcally 2 Sam to 5cm (1 to
2 inches) lrom your mouth.
9. Press [PTT] key to lnltlate a call. The display wrll
show the allas or ID and the loon.
10. You can speak clearly into the mlcrophone unlll the
“Group Call Begin Tone“ ends (if it has been turned on.)
I Call L093
Your repeater Wlll record all recent call Users can use
call log to vlew and manage the recent call actlvlty.
© Users can periorm the iollowmg tasks ln call list:
Check / View
Talk tlme
Delete
Clear the list
Checking the latest call activity
The list of calls are outgoing calls
Procedure:
1. Press [Menu] key or press [SELEC‘H button to access
menu.
2. Rotate [SELECT] button to select “Call Log" and
press [OK] key or press [SELECT] button.
3. Rotate [SELECT] button to select “Outgolng calls"
View the setting of menu function and operation
press [OK] key or press [SELECT] button.
4. Screen will display the most recent call log
5 Rotate [SELECT] button to select caller alras or ID
I Hold the Microphone vertically 2.5cm to 5cm (1 to 2
inches) lrorn your mouth.
I Press [PTT] key to make a call use the currently
selected call alias or ID. The screen will display the call
atlas or ID as well as a call icon.
I Wailing for the"Group Call Begin Tone" to end (if
enabled) then user can speak clearly lnto the
mlcrophone
OR
I Press [OK] key or press [SELECT] button to access
sub menu.
I Rotate [SELECT] button to select "Search"
I Press [OK] key or press [SELECT] button.
I The Screen dlsplays the selected alias or ID number.
I Press [Back]key to return to the previous menu
OR
I Rotate [SELECT] button to select "Talk Time"
I Press [OK] key or press [SELECT] button.
I The screen displays the tlme and the duration at the call.
6. Press [Back] key to return to the prevlous menu
Clear Call Log list
Procedure:
1 Press [Menu] key or [Select] knob to access menu
2 Rotate [Select] knob select Call Log and press [OK]
key or [Select] knob.
3. Rotate [Select] knob to select "Clear the list and
press [OK] key or [Select] knob.
4. Rotate [Select] knob to select outgolng calls. Then
press [OK] Key or [Select] knob to conllrm.
5. The screen displays the call log has been cleared.
6. The radio returns to the previous menu.
I Attachment
Users can View some general information from the
attachment menu
Note:
9 Some infcrmatlon of the radios only support to vlew
lithe radlo with the optlonal tuncticns.
G] View attachment information
Procedure:
1. Press [Menu] key or [Select] knob to access menu.
28
29
View the setting of menu function and operation
2. Rotate [Select] knob to select Attachment and press
[OK] key or [Select] knob.
3 Rotate [Select] knob to select Date and press [OK]
key or [Select] knob.
4. The display shows the current date.
5. Press [Back] key to return to previous menu.
I GPS (optional)@
You can choose to purchase the radio with GPS feature.
GPS teature allows you to check or send your current
longitude, latitude, time, date, altitude and speed etc
data.
GPS ON/OFF
Procedure:
1 Press [Menu] key or [Select] knob to access menu
2. Rotate [Select] knob to select GPS and press [OK]
key or [Select] knob.
3. The display shows the available options of GPS.
4. Rotate [Select] knob to select desired option and
press [OK] key or [Select] knob.
I Rotate [Select] knob to select GPS On/Ofi and press
[OK] key or [Select] knob.
I Rotate [Select] knob to select GPS On and press
[OK] key or [Select] knob
I The display shows saved, when GPS is turned ON,
the GPS icon will show on the display.
I Your radio returns to the previous menu.
OR
I Rotate [Select] knob to select GPS Off and press
[OK] key.
I The display shows saved, when GPS is turned OFF,
the GPS icon will disappear on the display
I Your radio returns to the previous menu.
5. Press [Back] key to return to the previous menu.
View GPS Location
Procedure:
1. Press [Menu] key or [Select] knob to access menu.
2. Rotate [Select] knob to select GPS and press [OK]
key or [Select] knob
3. The display shows the GPS menu options.
4 Rotate [Select] knob to desired sub menu and press
[OK] key or [Select] knob
View the setting of menu function and operation
I Rotate [Select] knob to select Location and press
[OK] key or [Select] knob.
I The display shows the GPS information.
I Rotate [Select] knob to view GPS entries.
I Press [Back] key to return to the previous menu.
[Time-zone Position Calibration
Procedure:
1. Press [Menu] key or [Select] knob to access menu.
2. Rotate [Select] knob to select GPS and press [OK]
key or [Select] knob.
3. The display shows the GPS menu options.
4 Rotate [Select] knob to select desired sub menu and
press [OK] key or [Select] knob.
I Rotate [Select] knob to select Time zone and press
[OK] key or [Select] knob.
I The display shows the Time zone menu.
I Rotate [Select] knob to select Auto Aligning.
I The display shows "Waiting"
I Press [Back] key to cancel the auto calibration and
return to the menu.
OR
I Rotate [Select] knob to select Manual Aligning .
I The display shows Time zone lists.
I Rotate [Select] knob to select current time Zone entry
and press [OK] key or [Select] knob.
I The display shows the Calibration is complete.
I The display returns to previous menu.
5 Press [Back] key to return to the previous menu
Note:
o It might need some time [or the auto aligning, please
wait until "Waiting" to disappear.
o For the auto aligning. please ad]usl the time
according to the local time.
I Settings
If your dealer or system administrator allows you to set
and Check the radio basic operations and functions,
you can set the follcwmg functions via menu.
© You can carry out the lollowing tasks in settings
underthe menu:
0 Equipment Information
0 Parameter
- Zone
30
31
View the setting of menu function and operation
Dale & Time
Tone Setting
Basic Setting
Factory Restore
Function Setting
Signaling
FM Decompression
ago...-
(0! Parameter
If your dealer or system administrator allows you to set
the radio, you can set the menu and other operation
settings to set high/low power, time slot and voice
landing
High / Low power
If it is allowed by dealer or system administrator, users
can set the repeater high/low power through menu
display, to enlarge the working distance.
Note:
0 High power could ensure the communication With
long-distance target radio.
0 Lower power could sure the communication with
short-distance target radio.
Procedure:
Press the preset [High/Low] key to SWitch the high/ low
power
Or:
Through the menu display to set the power level, as
below.
1 Press [MENU] or [Select] knob key to access the
menu.
2. Rotate [Select] knob to select Settings. and pres[OK]
key or [Select] knob.
3. Rotate [Select] knob to select Parameter Selling.
and press [OK] key or [Select] knob.
4. Rotate [Select] knob to select High/low power, and
press [OK] key or [Select] knob.
I Rotate [Select] knob to select High power, and press
[OK] key or [Select] knob.
I The display shows "saved" and returns to the previous
menu.
OR
I Rotate [Select] knob to select Low power, and press
[OK] key or [Select] knob.
I The display shows "saved" and returns to the previous
View the setting of menu function and operation
menu.
5. Press [Back] key to return to the previous menu.
S Time Slot and Voice Landi
If it is allowed by dealer or system admlnistrator, users
can set and check the tlme slot through menu display.
Procedure:
1. Press [MENU] or [Select] knob key to access the
menu.
2. Rotate [Select] knob to select Settings, and pres
[OK] key or [Select] knob.
3. Rotate [Select] knob to select Parameter Setting,
and press[OK] key or [Select] knob.
4. Rotate [Select] knob to select Time slot, and press
[OK] key or [Select] knob
I Rotate [Select] knob to select Time slot 1, and press
[OK] key or [Select] knob.
I The display shows Tlme slot saved, and returns to
the preVlous menu.
OR
I Rotate [Select] knob to select Time slot 2, and press
[OK] key or [Select] knob.
I The dlsplay shows Slot Saved and returns to the
previous menu.
OR
I Rotate [Select] knob to select Time slot 1 & 2 On,
and press[OK] key or [Select] knob.
I The display shows Tlme slot saved, and returns to
the preVlous menu.
I Rotate [Select] knob to select Time slot 1 & 2 Off,
and press[OK] key or [Select] knob.
I The display shows Tlme slot saved, and returns to
the prevlous menu
5. Press [Back] key to return to the previous menu.
to! Zone Setting
A zone ls a group of channels. Vour radio supports up
to 1B zones. Wlth a maxlmum 0116 digital channels
and 16 analog channels per zone.
Select a Zone
If It Is allowed by dealer or system admlnlstrator, users
can set and check the zone lnformaticn through menu
display.
Procedure:
32
33
View the setting of menu function and operation
Press the preset [Zone] key to choose a zone [or the
radio.
OR
Follow the steps below.
1. Press the [Menu] key or [Select] knob or to access
menu
2. Rotate [Select] knob to select Setting, and press
[OK] key or [Select] knob.
3. Rotate [Select] knob to select zone, and press [OK]
key or [OK] knob.
4. There are the zone llsts (16 zones at most).
5. Rotate [Select] knob key to select a desired zone
in zone llst and press [OK] key or [Select] knob
6. The dlsplay shows "Zone Saved"
7. The radio returns to the home dlsplay.
Note:
0 The number and names ofthe zones tn the list should
be preset by your distributor or system admlnistrator
(there can be a maxlmum oHB zones)
9 The zone wlll be showed on the display after
selected.
to! Date 8. Time
If it is allowed by dealer or system admlnistrator, users
can set and check the date, time, and date iormat
through menu display.
Procedure:
Setting the tlme,date and date dlsplay format
Procedure:
1. Press [Menu] key or [Select] knob to access the menu.
2. Rotate [Select] knob to select Setting then press
[OK] key or [Select] knob
3. Rotate [Select] knob to select Date 8. Time then
press [OK] key or [Select] knob.
4. Rotate [Select] knob to select the deslred sub menu.
I Rotate [Select] knob to select Date. and press [OK]
key or [Select] knob.
I The dlsplay shows year/month/day (depending on
the date lormat).
I Rotate [Select] knob and then input the date wrth
keypad.
I The display shows Date Saved when the date lS set.
Please press [Back] to return to the previous menu.
OR
View the setting of menu function and operation
I Rotate [Select] knob to select "Date Format" and
press [OK] key or [Select] knob.
I The display lists different date formats, Y/M/D, M/D/Y,
D/M/Y
I Rotate [Select] knob to select the desired date format,
and press [OK] key or [Select] knob.
I The display shows "Date Format Saved" and returns
to the preVious menu
5. Press [Back] key to return to previous menu.
to! Prompt Tone
Users can set or check the prompt of the radio through
the menu. if it is allowed by the distributor or system
administrator.
You can set or check the prompt or following functions
a Profiles
o Keytone
- Low Battery Alert
0 Message Tone
a Private Call Tone
- Group Call Tone
Profile Setting
There are 4 profiles available on your radio-
Standard 7 turn on all prompts
Silent iturn off all prompts.
Vibrate 7 vibrate but without prompts. (optional)
Vibrate on Ring —vibrate with prompts on (optional)
Note:
Those profiles with “-l-“ are optional or not available
at present.
Procedure:
1. Press [Menu] Key or [Select] knob to access the
menu.
2. Rotate [Select] knob to select Settings. then press[OK]
key or [Select] knob.
3 Rotate [Select] knob to select Prompt Tone, then
press [OK] key or [Select] knob.
4. Rotate [Select] knob to select Profiles, then press
[OK] key or [Select] knob
5. Rotate [Select] knob to select the desired option.
I Rotate [Select] knob to select Standard.
I Press [OK] key or [Select] knob, the display shows
Profile Saved. Please press [Back] to return to the
34
35
View the setting of menu function and operation
previous rnenu.
OR
I Rotate [Select] knob to select Silent.
I Press [OK] key or [Select] knob, the display shows
“Profile Saved" Please press [Back] to return to the
previous menu.
OR
I Rotate [Select] knob to select Vibrate.
I Press [OK] key or [Select] knob, the display shows
Proflle Saved. Please press [Back] to return to the
previous menu.
OR
I Rotate [Select] knob to select Vibrate on Ring.
I Press [OK] key or [Select] knob, the screen shows
“Profile Saved" Please press [Back] to return to the
previous menu
6. Press [Back] to return to the prevleus menu.
Note:
0 You cannot operate or set those profiles that are
optional or not available
to! Keytone Setting
If it is allowed by dealer or system admlnistrator, users
can set and check the keytone operation through menu
display.
Procedure:
1. Press [Menu] Key or [Select] knob to access the
menu.
2. Rotate [Select] knob to select Settings. then press
[OK] key or [Select] knob
3. Rotate [Select] knob to select Prompt Tone, then
press [OK] key or [Select] knob.
4. Rotate [Select] knob to select Keytone, then press
[OK] key or [Select] knob
5. Rotate [Select] knob to select the Keytone control,
then press [OK] key or [Select] knob.
I Rotate [Select] knob to select On/Ofi. then press
[OK] key or [Select] knob
I Rotate [Select] knob to select ON, then press [OK]
key or [Select] knob.
I Screen dlsplays "saved"
. Then return to the prevlous menu
0R
View the setting of menu function and operation
I Rotate [Select] knob to select OFF, then press [OK]
key or [Select] knob.
I Screen displays "saved"
I Then return to the prevlous menu.
OR
I Rotate [Select] knob to select keytone Volume, then
press [OK] key or [Select] knob
I Rotate [Select] knob to select desired volume level,
then press [OK] key or [Select] knob
I Screen dlsplays "saved”
I Then return to the prevlous menu.
6. Press [Back] to return to the prevlous menu.
to! Low battery alert
If lt Is allowed by your dealer or system admlnlstrator,
users could set or check the radio power strength
prompt tone Vla menu screen.
Power strength tone setting
If requlred, you could turn ON or OFF the low battery
alert tone or control lts volume.
Procedure:
1. Press [Menu] key or [Select] knob to access menu list.
2. Rotate [Select] to select “Settings“, then press
[confirm] or [Select] .
3 Rotate [Select] knob to select prompt tone set. then
press [confirm] or [Select] .
4. Rotate [Select] to select "power strength tone" then
press [confirm] key or [Select]
5. Rotate [Select] to select a desired subrmenu, then
press [confirm] key or [Select].
I Rotate [Select] to select "Low battery alert sztch"
then press [confirm] key or [Select] .
I Rotate [Select] to select "ON“ and then press [confirm]
key or [Select] .
I The screen shows "Alert Saved"
I Screen will back to the previous menu
Or
I Rotate [Select] to select "OFF" and then press [confirm]
key or [Select] .
I The screen shows ”Alert Saved“
I Screen wrll back to the previous menu.
Or
I Rotate [Select] to select "Volume control" then press
36
37
View the setting of menu function and operation
[confirm] key or [Select] knob.
I Rotate [Select] to select the desired volume level,
and then press [confirm] key or [Select] knob
I The screen shows "Volume Saved“
I Screen will back to the previous menu
6 Press [Back] to return to prevlous menu
to; Message prompt tone
If ll is allowed by your dealer or system admlnistrator,
users could program or check message tone
Message Tone Setting
You can select the desired message tone (tone 1 - 5)
showed when there ls a message received
Procedure:
1. Press [Menu] key or [Select] knob to accesss menu
list.
2. Rotate [Select] to select “Settings“. then press
[confirm] key or [Select] knob.
3. Rotate [Select] knob to select prompt tone set, then
press [confirm] key or [Select] knob
4 Rotate [Select] to select "Message prompt tone" then
press [confirm] key or [Select] knob.
5 Rotate [Select] to select your desired subrmen, then
press [confirm] key or [Select] knob
I Rotate [Select] knob to select “Message tone switch“
and then press [conllrm] key or [Select] knob.
I Rotate [Select] to “ON" then press [Confirm] key or
[Select] knob.
I Screen shows "Tone saved“ note. And back to
previous menu.
Or:
I Rotate [Select] to select "OFF" then press [Confirm]
key or [Select] knob.
I Screen shows "Tone saved“. And back to previous
menu.
Or
I Rotate [Select] to select “Rings" then press [Confirm]
key or [Select] knob.
I Screen will display all rlngs.
I Rotate [Select] to select a desired rlng, then press
[Confirm] key or [Select] knob.
I Screen shows "Ring saved“ And back to previous
menu.
6. Press [Back] to return to previous menu
View the setting of menu function and operation
(0! Group call tone
If lt is allowed by your dealer or system adrnlnistrator,
users could program or check the group call tone types
and activate or turn off the tone feature
Group call tone 8. ring setting
You can turn on or ol‘f group call tone when the radio
transmit or receive the group call, and select the deslred
tone from tone 1 to tone 5.
Procedure:
1. Press [Menu] key or [Select] knob to access menu
lIst.
2. Rotate [Select] to select “Settings“. then press
[confirm] key or [Select] knob.
3. Rotate [Select] knob to select prompt tone set, then
press [confirm] key or [Select] knob.
4 Rotate [Select] to select "Group Call tone" then press
[confirm] key or [Select] knob.
5. Rotate [Select] to select a desired sub-menu, then
press [confirm] key or [Select] knob.
I Rotate [Select] to select "Group call switch" then
press [confirm] key or [Select] knob.
I Rotate [Select] to select "ON" then press [confirm]
key or [Select] knob.
I Screen shows "Set saved“ and then back to previous
menu.
Or
I Rotate [Select] to select "OFF" then press [confirm]
key or [Select] knob
I Screen shows "Set saved" and then back to previous
menu.
Or
I Rotate [Select] to select “Rlng type" and then press
[confirm] key or [Select] knob.
I All rlngs types will be llsted on screen. (There are
total 5 types)
I Rotate [Select] to select a desired tone type, and
then press [confirm] or [Select] knob
I Screen shows "Rlng saved" and then back to the
previous menu.
6. Press [Back] to return to previous menu
to; Basic setting
If permitted by your dealer or system admlnlstrator,
38
39
View the setting of menu function and operation
users could set or check the call prompt tone via screen
menu.
© Users can program or check the following basic
functions:
I Language
I Key look
I Backlight
I Version
I Display mode
Language
If it is allowed by your dealer or system administrator,
users could check or set their menu display language
via screen menu
[I Language
If required, users could choose one of preset language
as their radio menu display language.
Procedure:
1. Press [Menu] key or [Select] to access menu list.
2. Rotate [Select] to select “Settings“, then press
[confirm] key or [Select] knob.
3 Rotate [Select] knob to select "BaSlC Setting“ then
press [coniirm] key or [Select] knob.
4. Rotate [Select] to select "Language" then press
[confirm] key or [Select] knob.
5. All languages will be listed on screen.
6. Rotate [Select] to select a desired language, then
press [confirm] key or [Select] knob.
7. Screen shows “Language saved“ once operation
completed, and back to previous menu
8 Press [Back] to return to previous menu
Key Lock
If it is allowed by your dealer or system administrator,
users could set or check the repeater key lock mode
via screen menu, avoiding accident key input
© Users could choose the following one mode to lock
their keypads.
I ON 7 if there is no operation within one minute, the
keypad will be locked automatically.
I OFF 7 When you want to lock keypad, press [Menu],
and then press [‘] to lock.
Procedure:
1. Press [Menu] key or [Select] knob to acess menu list.
View the setting of menu function and operation
2. Rotate [Select] to select “Settings“. then press
[confirm] key or [Select] knob.
3. Rotate [Select] knob to select "Basic Setting" then
press [confirm] key or [Select] knob.
4. Rotate [Select] to select "Key Lock“ then press
[confirm] key or [Select] knob.
5 All key lock modes wrll be lrsted on screen
6. Rotate [Select] to select a desired mode, then press
[contlrm] key or [Select] knob.
I Rotate [Select] to choose "ON" then press [confirm]
key or [Select] knob.
I Screen shows “Selected mode saved“
I And then back to previous menu.
Or
I Rotate [Select] to select "OFF“ then press [confirm]
key or [Select] knob.
I Screen shows “Selected mode saved“
I Screen back to prevlous menu.
7. Press [Back] to return to prevlous menu
Note:
0 Press [confirm] key. and then press ['] to unlock
keypads.
Backlight setting
If it is allowed by your dealer or system administrator,
users could set or check the backlight mode [or repeater
screen. keypads and knobs vla screen menu
El Backlight model and lightness
If requlred. you could choose the repeater screen and
Keypad backlight mode and lightness to suit tor your
working environment, and makes it better userrlriendly”
© You could choose of the following modes for backlight.
I ON 7the backlight remains solid on
I OFF 7 Turn off backlight. ( Dlm light status)
I Auto 7 the backllght will be ofl automatically when
there l5 no operation tor more than 1 minute. And it wrll
llght when you press the key or there lS slgnal received
Procedure:
Press definable key [backlignt switch]. backlight will be
swrtched between ON and OFF.
Or to operation vla menu as below'
1. Press [Menu] key or [Select] knob to access menu list.
2. Rotate [Select] to select “Settings“, then press
[confirm] key or [Select] knob.
3. Rotate [Select] knob to select “Baslc Settlng“ then
40
4]
View the setting of menu function and operation
press [conllrm] key or [Select] knob.
4. Rotate [Select] to select "Backlight setting" then
press [confirm] key or [Select] knob.
5. Rotate [Select] to select a desired sub-menu, then
press [confirm] key or [Select] knob.
I Rotate [Select] to select backlight switch. and then
press [conllrm] key or [Select] knob.
I Screen shows all backllghl modes.
I Rotate [Select] to select a desired backlight mode.
and then press [confirm] key or [Select] knob
I Screen shows "Selected mode saved" and then back
to previous menu
Or
I Rotate [Select] to select backlight lightness, and then
press [confirm] key or [Select] knob.
I Rotate [Select] to select a desired lightness level,
and then press [coniirm] key or [Select] knob
I Screen shows "Set saved" and then back to previous
menu.
Or
I Rotate [Select] to select light sztch, and then press
[confirm] key or [Select] knob.
I Screen display all key light modes.
I Rotate [Select] to select a desired mode. and then
press [contlrm] key or [Select] knob.
I Screen shows "Selected mode saved" and then back
to previous menu.
Or.
I Rotate [Select] to select light lightness, and then
press [conllrm] key or [Select] knob.
I Rotate [Select] to select a desired lightness level,
and then press [confirm] key or [Select] knob
I Screen shows “Set saved“ and then back to previous
menu.
6. Press [Back] key to return to previous menu.
Version
If it is allowed by your dealer or system administrator,
uses could check your current repeatertii version via
screen menu.
[I Checking Version
It required, you could check the relevant version for
your current repeater
Procedure:
View the setting of menu function and operation
1. Press [Menu] key or [Select] knob to acess menu
list.
2. Rotate [Select] to select “Settings“. then press
[confirm] key or [Select] knob.
3. Rotate [Select] knob to select "Basic Setting" then
press [confirm] key or [Select] knob.
A. Rotate [Select] to select "Verslon" then press [confirm]
key or [Select] knob.
5. The radio verslon data will be displayed on screen.
6. Press [Back] to return to prevlous menu
Display Mode
If lt is permitted by your dealer or system admlnistrator.
you could set or check the home screen display mode
via screen menu.
D Selecting display mode
© You could choose one of the followmg display mode:
I Channel No. & Name — Channel number and preset
contact name Wlll be dlsplayed on screen.
I Channel No. & Freq — Channel number and
frequency WIII be displayed on screen.
I Channel No. —Cnannel number to be dlsplayed on
screen
© Procedure:
1. Press [Menu] key or [Select] knob to access menu list.
2. Rotate [Select] to select “Settings“, then press
[confirm] key or [Select] knob.
3. Rotate [Select] knob to select "Basic Settlng" then
press [confirm] key or [Select] knob.
A. Rotate [Select] to select "Display mode" then press
[confirm] key or [Select] knob.
5. All display modes will be listed on screen.
6. Rotate [Select] to select a deslred mode. and then
press [Confirm] key or [Select] knob.
7. Screen shows ”Set saved" and then back to previous
menu.
8. Press [Back] to return to previous menu
To restore factory default
If it is allowed by your dealer or system administrator.
users could set or check the factory default settlng via
screen menu.
El Restoring factory default operation
If required, you could restore the current repeater's
42
43
View the setting of menu function and operation
selling to factory delautl.
Procedure.
1. Press [Menu] key or [Setect] knob to aocess menu “st.
2. Rotate [Select] to select “Setlings‘fl then press
[confirm] key or [Setecl] knob
3 Rotate [Setect] to setect “Factory defautt“ then press
[confirm] key or [SELECT] knob.
4 Screen shows "The operation can NOT be relneved,
are you sure to do?"
5. Press [confirm] or [SELECT] knob to confirm to restore
factory default.
I Then screen back to prevrous menu
Or
I Press [Cancel] to cancel the current operation.
I Screen back to prevrous menu.
6. Press [Back] to return to prevrous menu
5'; Function Setting
You could program some common functron vra screen
menu.
Wide I Narrow hands
If required, you coutd preset the working band
(Wrde/Narrow) for radio.
Procedure:
1. Press [Menu] key or [Setect] knob to access menu “st.
2. Rotate [Select] to setect "Settings", then press
[confirm] key or [Select] knob.
3 Rotate [Setecl] to select "Function setting" then press
[confirm] key or [Select] knob.
4. Rotate [Select] to setect "Wrde/Narrow band" then
press [confirm] key or [Select] knob.
I Rotate [Setect] to select RX Wide/Narrow band, then
press [confirm] key or [Select] knob.
I Rotate [Setect] to select RX Wrde band, then press
[confirm] key or [Select] knob.
Or
I Rotate [Setect] to select RX Narrow hand, then press
[confirm] key or [Select] knob.
I Screen shows ”Set saved“. and back to prevrous
menu.
I Rotate [Setect] to select TX Wrde/Narrow band, then
press [confirm] key or [Select] knob.
I Rotate [Select] to select TX Wide band, then press
View the setting of menu function and operation
[contlrm] key or [Select] knob.
Or
I Rotate [Select] to select TX Narrow band, then press
[confirm] key or [Select] knob.
I Screen shows "Set saved“ and back to prevlous
menu.
5. Press [Back] to return to prevlous menu
on Signaling setting
You could preset the repeater CTCSS or CDCSS under
analogue mode via screen menu, to avold useless
signal interference.
crcsstcss 8
If required, you could preset the signaling type and
code to prevent useless signal interference or actlvate
repeater
Procedure:
1. Press [Menu] key or [Select] knob to acces menu list.
2. Rotate [Select] to select “Settings“, then press
[confirm] key or [Select] knob.
3. Rotate [Select] to select “Signallng Setting" then
press [contlrm] key or [Select] knob.
4. Rotate [Select] to select a required "CTCSSI CDCSS"
then press [confirm] key or [Select] knob.
I Rotate [Select] to select CDCSS, then press [confirm]
key or [Select] knob.
Or
I Rotate [Select] to select CTCSS, then press [contlrm]
key or [Select] knob.
5. Rotate [Select] to select TX code. then press [confirm]
key or [Select] knob.
Or
I Rotate [Select] to select RX code. then press [confirm]
key or [Select] knob
6. Rotate [Select] to select a desired code. then press
[confirm] key or [Select] knob.
7. Screen shows “Set saved"
8. And then back to previous menu.
9. Press [Back] to return to previous menu
Note:
0 Repeater under analogue mode, only it will be
actlvated when slgnaling preset.
44
45
View the setting of menu function and operation
FM voice companding decodfie
If requlred, you could preset voice processing type for
TX and RX.
Procedure:
1. Press [Menu] key or [Select] knob to access menu list.
2. Rotate [Select] to select “Settings“. then press
[confirm] key or [Select] knob.
3. Rotate [Select] to select "FM voice companding
decode" then press [confirm] key or [Select] knob.
4 Rotate [Select] to Select "FM compandlng decode"
then press [confirm] key or [Select] knob
I Rotate [Select] to select “PM RX VOlCE companding
decode swnch“ and then press [confirm] key or [Select]
knob.
Or
I Rotate [Select] to select "FM TX voice companding
decode sthch" and then press [confirm] key or [Select]
knob
5 Rotate [Select] to sekect ON or OFF. and then press
[confirm] key or [Select] knob.
6 Screen shows "Set saved" and then back to previous
menu.
7. Press [Back] to return to previous menu
Note:
0 Once the FM voice companding to be set "ON" there
may pops up some unclear sound or maliuncticn when
working with olhertermlnals.
0 To compatlble With other terminals better, we suggest
to turn OFF the FM voice compandlng
I Scan
If it is allowed by your dealer or system administrator,
users could set or operate repeater scan mode vla
screen menu.
Scan ON or OFF
Once scan is enabled, the radlo le start scan cyclically
to check lf there ls any actlvilles in the channel under
the scan list . Once the scan is ON. the LED will flash
RED, and scan icon [ C ] will be displayed on the top
of screen.
When mixed modes (analogue and dlgilal) channels
under scanning. li your repeater stays on a dlgltal
View the setting of menu function and operation
channel, but repeater scans an analogue signal and
locked on the channel. then the repeater will auto sWitch
to analogue mode from digital mode during the calling
duration, vice versa.
Note: once the scan activated, repeater may fail to
transfer Signal in time or miss some signals. Thus,
please be careful on the feature
Procedure:
Press delinable key [Scan Switch] to turn on or oft the
scan.
Or operate via screen menu as below:
1. Press [Menu] key or [Select] knob to acces menu list.
2 Rotate [Select] to select "Scan", then press [confirm]
key or [Select] knob.
3 Scan subrmenu will be listed out
4. Rotate [Select] to select "Scan“ then press [confirm]
key or [Select] knob.
5. Scan lists Will be listed out.
6. Rotate [Select] to select a desired scan list, then
press [confirm] key or [Select] knob.
I Rotate [Select] to select a "Start scan" then press
[confirm] key or [Select] knob.
I Screen shows "Start scanning"
Or:
I Rotate [Select] to select "Scan OFF" then press
[confirm] key or [Select] knob.
I Screen shows “Scan is OFF"
7. Then back to home screen.
Note:
0 Once scan activated, LED will be flashed, and scan
icon [ C ]Wl” appear on the top of screen.
When scan to be turned off, LED will be off, too. And
the icon will he disappeared.
Scan Mode
If it is allowed by your dealer or system administrator,
users could set and operate scan mode via screen
menu.
EIScan Mode setting
If required, you could choose the processing way when
receiving signal during scanning, after scan activated.
© There are three options for your choice:
CO (carrier) — Once radio receives a scanned signal
over the air, it Will stay on that channel until signal
46
47
View the setting of menu function and operation
disappears, and lhen conlinue to scanning.
TO (Time) 7 Once the radio receives a scanned signal
over lhe air. it will stay on lhal channel for a presel
time. Once lime is out, il Wl” conlinue lo scanning.
SE (Seek) 7 Once the radio receives a scanned signal
overlne air, it will stay on that channel and stop scanning
unlil you re-aclivate lo scanning
Procedure:
1. Press [Menu] key or [Select] knob lo access menu list.
2 Rotale [Select] lo select "Scan", then press [confirm]
key or [Select] knob.
3. Scan sub-menu will be listed oul.
4. Rolale [Select] lo select "Scan mode" then press
[conlirm] key or [Select] knob.
5. All scan modes Will be listed out.
6. Rotate [Select] to select desired scan mode, lhen
press [coniirm] key or [Select] knob
7 Screen shows "Sel saved" and back lo previous
menu
8 Press [Back] to relurn to previous menu
Scan list
Vou could preset or create scan list and assign lhem
lo single channel or group via programming software.
Then your repealer will scan lhe channel or group ct
scan list through cycle scan. to monitor ii there Is voice
activity among them Your repeater max supports 16
scan lists, and every list could contain 512 members
at mosl Every scan list supports both analogue and
digital modes.
If it is permitted by your dealer or system administrator,
you could program scan list add, delete channel or
priority channel elc through screen menu.
El Scan list
Procedure:
1. Press [Menu] key or [Select] knob to access menu list.
2 Rotale [Selecl] to select "Scan", then press [confirm]
key or [Select] knob.
3. Scan sub-menu Will be listed out.
4. Rotale [Select] lo select “Scan lisl" then press
[confirm] key or [Select] knob.
5. All scan lists Will be listed out.
6. Rotate [Select] to select a desired scan list, then
press [confirm] key or [Select] knob.
View the setting of menu function and operation
7. All channel number or name under the scan list will
be listed out
8. Rotate [Select] to check or select the scan list
member.
I Press [confirm] key or [Select] knob
I Rotate. knob to select "Pnonty channel" or"Disable
priority" or “Delete" optlon, and then Press [confirm]
key or [Select] knob.
I Press [Back] to return to prevlous menu.
Or
I Rotate [Select] knob to Choose "Add Channel" and
then press [confirm] key or [Select] knob.
I Screen shows all available channel number or
members
I Press [confirm] key or [Select] knob to confirm to add
to scan llst
I Screen will back to previous scan llst.
8. Press [Back] to return to prevlous menu
48
Kydera®
PROFESSIONAL DIGITAL REPEATER

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Author                          : XM150
Create Date                     : 2017:05:18 13:24:57+08:00
Modify Date                     : 2017:05:18 13:33:37+08:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2017:05:18 13:33:37+08:00
Format                          : application/pdf
Title                           : <4B79646572612D54522D36303030444DD6D0BCCCCCA8CBB5C3F7CAE92DD3A2CEC42E706466>
Creator                         : XM150
Producer                        : Acrobat Distiller 9.0.0 (Windows)
Document ID                     : uuid:eda53c86-b8a6-4ebf-b1ee-3c5cfb640eef
Instance ID                     : uuid:7d60e587-4a84-4bc2-af96-518d21490ac7
Page Count                      : 26

EXIF Metadata provided by EXIF.tools