FUJIFILM Business Innovation KBRF Limited Modular Transmitter Approval User Manual FUJI XEROX

Download:
Mirror Download [FCC.gov]
Document ID	408695
Application ID	GdVJHXt5JiVxggpejLexYw==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	15.83kB (197929 bits)
Date Submitted	2004-03-26 00:00:00
Date Available	2004-03-25 00:00:00
Creation Date	2004-01-20 13:01:56
Producing Software	Acrobat Distiller 5.0 (Windows)
Document Lastmod	2004-01-20 13:02:27
Document Title	FUJI XEROX
Document Creator	Word 用 Acrobat PDFMaker 5.0
Document Author:	M.Hirata

FUJI XEROX
LEFX
User’s Manual
Introduction
This manual explains the installation process and a function and
This product uses the radio wave of 125kHz. (Inductive Loop System)
performance of Radio Frequency Identification system (LEFX).
Therefore, this product takes a regulation and/or low such as output of the
This product doesn't permit a repair and an exchange by the end user.
RF power by each country and/or self-governing body.
Please contact our service office or a Fuji Xerox product handling Service
Some cases, the final product (e.g. printer) adapts to the law of each
Company when the exchange of the device is necessary due to the trouble
country, and type approval may be required.
and so on.
Also, please read this manual to the end surely, and use a product properly
before you install LEFX in your machine.
The following shall be kept to use a product for the safety.
A cable and TAG shall use designation accessories.
A cable and TAG shall use designation accessories.
Do not remodel and/or dismantle this product.
Don't remodel this product because a Fire, Electric shock and Machine
trouble may be caused. Because this product uses a radio wave, law of the
country may punish so remodeling of the product.
Remove a power supply soon if you notice smoke or unusual smell.
Remove a power supply if you notice smoke or unusual smell, because it
short-circuits, and a fire and an electric shock may be caused.
FUJI XEROX CO., LTD.
Don't put wiring and/or other articles on this product.
This product builds in the antenna which radiates the radio wave.
Notice about the law and the standard
Performance may not be able to be maintained when the wire etc. is
installed on the product and so on.
CE 0682
Don't install this product in the place to have the possibility for a liquid
This product applies the European NB certificate where it followed the
and other material fall.
99/5/ EEC.
You may be struck by electricity or product may short-circuit.
An applicable standard is as follows;
EN 300 330 V1.3.2
Don't give this product an electric static discharge
EN 301 489 -1 and EN 301 489 -2
This product may be damaged by the static electricity which accumulated
in the human body and so on. Connect a human body to the ground at the
FCC ID: J2LKBRF, IC:xxxxxx-xxxx
time of the maintenance or discharge before the work.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
Product use environment is to keep the following.
Guarantee temperature: 0 to 55 degrees C (when working)
including interference that may cause undesired operation.
Storage temperature: 0∼35℃ 12months, -20∼0℃ 35∼45℃
Humidity: 15∼80%RH 12months, 5∼15%RH 80∼95%RH
48Hours
48Hours
Rated input power: DC +5V +/- 5%, DC +3.3V +/- 5%
How to scrap this product
Make contact with Fuji Xerox or our company agency when you scrap this
product. Or, follow ordinances such as each country and a local government.
Please ask each country and a self-governing body about the information of
the regulations.
This product acquires the certification or approval of the wireless module.
However, a product (e.g. printer) that contains this module must apply the
various standards required to the product.
Outline of the product
System Requirement
The following condition shall be kept, that use LEFX unit system.
Summary
LEFX-C must be used with the LEFX-T.
LEFX Unit System is RFID (Radio Frequency Identification) device for an
LEFX must be internally installed in machine. (Printer)
Inductive loop coupling. This system has two modules of the Reader/Writer
Supply DC Voltage must be 5V+/- 5% and 3.5V +/- 5%.
(LEFX-C) and Tag (LEFX-T).
The certification label and/or the notice of the manual may be
LEFX generates a 125kHz signal on an internal looped antenna.
Transmitted data are modulated using Amplitude Shift Keying (FSK)
necessary for the final product enclosure, which contains this unit.
modulation.
Do not make the radiation time of the radio wave continue for more
than one second.
Received data are demodulated from the Tag load variation signal,
generated on the antenna.
Specifications
Tag is battery less memory with a looped antenna.
The specifications of the product are as the following;
Communication distance between LEFX-C and LEFX-T is 3mm to
Carrier Frequency: 125kHz +/- 200ppm
13mm.
Modulation: FSK
Communication distance: 3mm to 13mm
(It means the distance of the Reader Writer Module ANT and Tag
Block diagram of the product
Module ANT.)
Supply Voltage: DC 5V +/- 5%
Rated current: 69mA
Signal Level: TTL (3.3V)
Operating temperature: +5 to +32degrees C
Maximum RF power: 4.73mW (Fixed for maximum power)
Layout of the module
Installation of Antenna for Toner cartridge to the Printer
Antenna
LEFX-A
Printer
LEFX-C area
Installation of Antenna for Drum cartridge to the Printer
Instillation example
The example used for the toner cartridge sensor of the printer is shown in
the following.
Installation of module to the Printer
Tag
LEFX-T
Printer
Printer
LEFX-C
Installation of TAG to the toner cartridge
Toner cartridge
Tag
LEFX-T
Installation of TAG to the Drum cartridge
Tag
Drum cartridge
LEFX-T
The explanation of the test mode
It is becoming an outside a company top-secret item about the action
method of the radio communication.
We disclose it about the communication method after purchase contract
completion.
FUJI XEROX CO., LTD.
3-7-1 Funai, Iwatsuki-shi, Saitama-ken 339-8509
TEL: +81-48-798-5111
URL:http://www.fujixerox.co.jp/

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Modify Date                     : 2004:01:20 13:02:27+09:00
Create Date                     : 2004:01:20 13:01:56+09:00
Page Count                      : 6
Creation Date                   : 2004:01:20 04:01:56Z
Mod Date                        : 2004:01:20 04:01:56Z
Producer                        : Acrobat Distiller 5.0 (Windows)
Author                          : M.Hirata
Metadata Date                   : 2004:01:20 04:01:56Z
Creator                         : M.Hirata
Title                           : FUJI XEROX
Page Mode                       : UseNone
Tagged PDF                      : Yes

EXIF Metadata provided by EXIF.tools