FUJITSU TEN FT0018A CD Receiver with Bluetooth User Manual FT0018A RT50 BT Manual 100917
Fujitsu Ten Limited CD Receiver with Bluetooth FT0018A RT50 BT Manual 100917
TempConfidential_8. User's Manual
• Do not leave your mobile phone in the car. The temperature inside may
be high and damage the phone.
• When you dispose of your car, take care to delete all personal data that
are registered in your ISUZU D-MAX AUDIO system. You should delete
the following Hands-free data from the system;
• Bluetooth phone data
In the following conditions, the system may not function.
• The mobile phone is turned off.
• The current position is outside the communication area.
• The mobile phone is not connected.
• The mobile phone has a low battery.
HANDS-FREE SYSTEM
• The Bluetooth
®
word mark and logos are owned by the Bluetooth
Hands-free system allows you to make or receive a call without taking
SIG, Inc. and use of such marks by ISUZU MOTORS LIMITED is
your hands off the steering wheel by connecting your mobile phone.
under license. Other trade marks and trade names are those of their
This system supports Bluetooth. Bluetooth is a wireless radio data
respective owners.
transferring system by which you can make calls without your mobile
• Compatible Bluetooth Specifications: Bluetooth Specification Ver. 1.2
phone being connected with a cable or placed on cable.
or later
If your mobile phone does not support Bluetooth, this system
• Compatible Profiles: HFP Ver. 1.5 or later
can not function.
OPP Ver. 1.1 or later
ATTENTION
NOTE
CAUTION
While driving, do not use a mobile phone or connect the bluetooth phone.
HANDS-FREE OPERATION
③ DISPLAY WINDOW
⑦ FUNCTION
BUTTONS
① VOLUME
ADJUST
KNOB
② PHONE
BUTTON
⑤ AUDIO
BUTTON
④ TUNE•
FILE
KNOB
⑥ MENU
BUTTON
!
!!
!
FUJITSU TEN CONFIDENTIAL
ABOUT THE DISPLAY
• The telephone set will be registered in the main unit automatically. When
registration is completed, the message "Completed!" appear for a few seconds
Reception Level Indication
and " " is shown in the DISPLAY WINDOW ③ in that order.
The strength of the reception is indicated in the DISPLAY WINDOW ③(5) Press the PHONE button ② to go back to the previous mode.
You cannot register the Bluetooth telephone set while driving. Park your
vehicle in a secure location and select the telephone set.
Bluetooth connection status
When a Bluetooth connection is established, " " is shown in the
DISPLAY WINDOW ③
If "Failed" is displayed in the DISPLAY WINDOW ③ after entering the
pass key, repeat the registration operation.
REGISTERING A BLUETOOTH TELEPHONE SET
Registration is required in order to use a Bluetooth telephone set.
CHANGING THE PASS KEY
For details of the operation to be performed at the telephone set,
refer to the instruction manual supplied with the telephone set. (1) Press the PHONE BUTTON ② to display the phone menu.
(2) Press MENU BUTTON ⑥, then press in the FUNCTION
REGISTERING BLUETOOTH TELEPHONE SET FOR THE FIRST TIME
BUTTON ⑦ to display Bluetooth menu.
(NO PHONES CURRENTLY REGISTERED)
(3) Press in the FUNCTION BUTTON ⑦ to display the
(1) Press the PHONE BUTTON ② to display the phone menu. Bluetooth information of the main unit.
(2) Press MENU BUTTON ⑥, then press in the FUNCTION (4) Press in the FUNCTION BUTTON ⑦ to change the pass key.
BUTTON ⑦ to display Bluetooth menu. (5) Turn the TUNE•FILE KNOB ④ to display the numeral of your
(3) Press in the FUNCTION BUTTON ⑦ so that the main choice in the DISPLAY WINDOW ③, then press the AUDIO
unit will start searching for other Bluetooth devices. BUTTON ⑤.
(4) When "Connecting...", "Device Name: D-MAX" and
• Repeat the same operation until you have entered the entire pass key.
"Passkey: ____" is displayed in the DISPLAY WINDOW ③; (6) After entering the final number of your choice, press in the
use the mobile phone to pair with the main unit FUNCTION BUTTON ⑦ to save the pass key you have entered.
and to enter the pass key.
• The pass key number comprises of only 4 digits.
• The connection method from the telephone set to the unit varies according • If you wish to change the pass key again, press and then press
to the specification of your telephone set. Refer to the instruction manual in the FUNCTION BUTTON ⑦.
supplied with the telephone set
(5) Press the PHONE button ② to go back to the previous mode.
NOTE
Indication
Level
ATTENTION
StrongWeak
BT
PAIR
INFO
EDIT
BT
SAVE
INFO EDIT
FUJITSU TEN CONFIDENTIAL
(1) Press the PHONE BUTTON ② to display the phone menu.
(2) Press in the FUNCTION BUTTON ⑦ to input the number
You cannot change the pass key while driving. Park your vehicle in a secure
you wish to call.
location and change the pass key.
(3) Turn the TUNE•FILE KNOB ④ to display the numeral of your
choice in the DISPLAY WINDOW ③, then press the AUDIO
BUTTON ⑤.
• Repeat the same operation until you have entered the entire number.
DELETING A REGISTERED TELEPHONE SET
(4) When the name or telephone number you wish to call appears
in the DISPLAY WINDOW ③, press in the FUNCTION
(1) Press the PHONE BUTTON ② to display the phone menu. BUTTON ⑦.
(2) Press MENU BUTTON ⑥, then press in the FUNCTION (5) When the person receives the call, use "hands-free" to talk.
BUTTON ⑦ to display Bluetooth menu.
• When you have finished the call, press in the FUNCTION BUTTON ⑦.
(3) Press in the FUNCTION BUTTON ⑦ to display the mobile
phone information that is currently paired with the main unit.
(4) Press in the FUNCTION BUTTON ⑦ to delete/disconnect
MAKING A PHONE CALL FROM A REGISTERED NUMBER
the currently paired mobile phone.
(5) "Delete ok?" will appear in the DISLAY WINDOW ③ asking for (1) Press the PHONE BUTTON ② to display the phone menu.
confirmation, then press in the FUNCTION BUTTON ⑦. (2) Press in the FUNCTION BUTTON ⑦ to display all phone
• When deletion is completed, BT mark " " will disappear in the
numbers registered, then turn TUNE•FILE KNOB ④ to search
DISPLAY WINDOW ③.
and select the number you wish to call.
(5) Press the PHONE button ② to go back to the previous mode. (3) When the name or telephone number you wish to call appears
in the DISPLAY WINDOW ③, press in the FUNCTION
BUTTON ⑦.
(4) When the person receives the call, use "hands-free" to talk.
You cannot delete the registered telephone set while driving. Park your
• When you have finished the call, press in the FUNCTION BUTTON ⑦.
vehicle in a secure location and delete the registered telephone set.
MAKING A PHONE CALL
Phone number is not displayed while driving. Only when the vehicle is
stopped or parked, the phone number is displayed.
You can make a phone call using the phone book of the main unit,
manually dialing from the main unit or direct from your mobile phone.
ATTENTION
ATTENTION
ATTENTION
BT
CELL
DEL
YES
DIAL
CALL
BOOK
CALL
END
END
FUJITSU TEN CONFIDENTIAL
ANSWERING A PHONE CALL
(2) Press MENU BUTTON ⑥, then press in the FUNCTION
BUTTON ⑦ to display Bluetooth menu.
When your telephone set receives a call, the name or telephone (3) Press in the FUNCTION BUTTON ⑦ to add phone book
number appears in the DISPLAY WINDOW ③ entry.
• If the incoming telephone number is not registered, the telephone
(4) Press in the FUNCTION BUTTON ⑦ so that the main device
number is displayed in the DISPLAY WINDOW ③.
will be ready to receive the phone book entry.
If the incoming telephone name and number are registered, the name
(5) When "Connecting…" and "Please send phonebook!" is displayed
is displayed in the DISPLAY WiNDOW ③.
in the DISPLAY WINDOW ③, send the phone book data from
If only the incoming telephone number is registered, the telephone
the mobile phone to the main device via Bluetooth.
number is displayed in the DISPLAY WINDOW ③.
• When the mobile phone has completed the sending, "Completed" appears for a
few seconds in the DISPLAY WINDOW ③.
(1) Press in the FUNCTION BUTTON ⑦ and talk "hands-free".
• When the main device's phone book has run out of registration capacity,
• When you have finished the call, press in the FUNCTION BUTTON ⑦. "Memory Full" will be displayed in the DISPLAY WINDOW ③.
(6) Press the PHONE button ② to go back to the previous mode.
REFUSING AN INCOMING CALL
(1) Press in the FUNCTION BUTTON ⑦ while the phone is
ringing.
You cannot register any information in the phone book while driving.
Park your vehicle in secure location and then register the information.
REGISTERING INFORMATION IN THE PHONE BOOK
Telephone numbers and names can also be registered manually
in the phone book. Up to 100 entries can be registered in the
DELETING THE DATA IN THE PHONE BOOK
phone book of the main device.
(1) Press the PHONE BUTTON ② to display the phone menu.
REGISTERING THE PHONE BOOK DATA OF A MOBILE PHONE IN
(2) Press MENU BUTTON ⑥, then press in the FUNCTION
THE PHONE BOOK OF THE MAIN DEVICE
BUTTON ⑦ to display Bluetooth menu.
To register the phone book data of a mobile phone registered in
the main device.
(1) Press the PHONE BUTTON ② to display the phone menu.
ATTENTION
CALL
END
END
BT
BOOK
ADD
BT
FUJITSU TEN CONFIDENTIAL
(3) Press in the FUNCTION BUTTON ⑦ to display all
SETTING THE VOLUME
registered phone number.
(4) Turn the TUNE•FILE KNOB ④ to search for the phone book
SETTING THE SPEECH VOLUME
entry you wish to delete. (1) Turn the VOLUME ADJUST KNOB ① clockwise or anticlockwise to
(5) Press in the FUNCTION BUTTON ⑦ to delete the achieve the speech volume you consider best.
registered phone number.
•The volume set in the adjustment is recorded.
• There is also an option for deleting all phone book entries by pressing
in the FUNCTION BUTTON ⑦.
SETTING THE VOLUME OF THE RING TONE
(6) "Delete ok?" will appear in the DISPLAY WINDOW ③ asking for (1)While the phone is ringing, turn the VOLUME ADJUST KNOB ①
confirmation, then press in the FUNCTION BUTTON ⑦. clockwise or anticlockwise to achieve the ring tone volume you
• When there is no data in the main device's phone book, "No Entry" will appear
consider best.
in the DISPLAY WINDOW ③. •The volume set in the adjustment is recorded.
(7) Press the PHONE button ② to go back to the previous mode.
The volume and microphone gain setting for each mobile phone is different
You cannot delete the phone book data while driving. Park your vehicle according to its specification.
in a secure location and then delete the data. Please adjust the volume by turning the VOLUME ADJUST KNOB ①.
DISPLAYING THE DEVICE INFORMATION OF THE
MAIN DEVICE
(1) Press the PHONE BUTTON ② to display the phone menu.
(2) Press MENU BUTTON ⑥, then press in the FUNCTION
BUTTON ⑦ to display Bluetooth menu.
(3) Press in the FUNCTION BUTTON ⑦ to display the
Bluetooth information of the main unit.
(4) Press the PHONE button ② to go back to the previous mode.
You cannot adjust the displayed device information of the main device while
driving. Park your vehicle in a secure location and then carry out the display.
ATTENTION
ATTENTION NOTE
BOOK
YES
DEL
A.DEL
INFO
BT
FUJITSU TEN CONFIDENTIAL
FCC ID: BABFT0018A
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.
Changes or modifications not expressly approved by the party
responsible for compliance could void the user's
authority to operate the equipment.
Radio Frequency Radiation Exposure
This equipment complies with FCC radiation exposure limits set
forth for uncontrolled equipment and meets the FCC radio
frequency (RF) Exposure Guidelines in Supplement C to OET65.
This equipment has very low levels of RF energy that it
deemed to comply without maximum permissive
exposure evaluation (MPE).
But it is desirable that it should be installed and
operated with at least 20cm
and more between the radiator and person's body
(excluding extremities: hands, writsts, feet and ankles).
This transmitter must not be co-located or operated in conjunction
with any other antenna or transmitter.
WARNING
CAUTION
FUJITSU TEN CONFIDENTIAL