FUNG SHING MOTOA1 MOTO A1 Helmet Communicator User Manual 1

FUNG SHING CO. LTD MOTO A1 Helmet Communicator 1

15_MOTO A1 UserMan

Music FunctionConnecting the Speakers and Moto A1PlayPress the MFB oncePausePress the MFB oncePush the volume joystick upVolume UpPush the volume joystick downPush and hold the volume joystick upVolume Down BacktrackPush and hold the volume joystick downFast Forward76Install Control UnitIdentify a position on the helmet to attach the Moto A1Stick the velcro onto the position identified in step A1Install the Moto A1Ensure the Moto A1 is firmly installed onto the helmet8Hide the cable into the cushion padsInsert the USB plug into Moto A1Stick the velcro into the ear cavities of the helmetLeft and right speakers must be installed symmetrically. The Microphones must be placed facing to the mouth9Simultaneously connect to 2 Bluetooth devicesPairingSwitch off the bluetooth function of Device A. Press and hold the MFB for 8 seconds while Moto A1 is off and pair with device BB2Press and hold the MFB for 8 seconds while Moto A1 is off and pair with device A1A3After pairing with device B, restart the bluetooth function of device A and manually connect to Moto A1ABRemarks: Moto A1 will automatically connect to only 1 bluetooth device. User has to manually connect Moto A1 to the second device if connecting to 2 bluetooth devices is in need.MouthDirec tionMOTO A1 User ManualMOTO A1 User ManualMOTO A1 User ManualBasic Function4Phone Call FunctionIntroductionChanging CasesVolume JoystickSpeaker/ Charging SocketMulti-Function Button(MFB)LED IndicatorChoose your desire caseInstall the case from top to bottomYou will hear "Click" when the case is successfully installedOpen the case from the sideof the charging35Press and hold the MFB for 5 secondsPower On Power OffPress and hold the MFB for 3 secondsParingWhen the MOTO A1 is off, press and hold the MFB for 8 secondsPush the volume joystick up Push the volume joystick downVolume Up Volume Down ResetPress and hold MFB and push and hold the volume joystick up for 7 secondsPress the MFB once while incoming callAnswering Incoming Call End Phone CallPres s the MFB once wh ile phone callDouble click the MFBReject Incoming CallDouble click the MFB in standby modeLast Number RedialPush the volume joystick twice in standby modeActivate ” Siri ”This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.FCC COMPLIANCE STATEMENT: Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses andcan radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.Consult the dealer or an experienced radio/TV technician for help.FCC Radiation Exposure StatementThe device has been evaluated to meet general RF exposure requirement. Warning: Changes or modifications to this unit not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment.The device can be used in portable exposure condition without restriction.

Navigation menu