Falcon 2019 Price Book (as Of 5/4/19) PB7
User Manual: Falcon 2019 Falcon Price Book (as of 5/4/19) Price Book
Open the PDF directly: View PDF 
.
Page Count: 352 [warning: Documents this large are best viewed by clicking the View PDF Link!]
Effective May 4, 2019 • Rev. 05/19
Price book 7
Click next for quick tips on
how to navigate Allegion
Price Books quicker!
Placing orders
You can place orders with Allegion via the fax numbers or emails listed below:
Locks, Exits (panic devices), Closers
Fax#: 1-800-452-0665
Email: Order_Entry_Schlage_Commercial@allegion.com
This price list supersedes and cancels all previous price lists. Prices shown are subject to change without notice.
Administrative Offices
Allegion Administrative Office
11819 N. Pennsylvania St.
Carmel, IN 46032
allegion.com/us
Customer Care
Our Customer Care Representatives are available for questions or assistance.
You can reach them at 877-671-7011 (Press 1 for Sales Support | Press 2 for Product Support | Press 3 for RSO) or
through the email addresses listed below:
Sales Support
support@allegion.com
Request for Quote
Carolinas
(North Carolina, South Carolina, Virginia)
Carolinas.Quotes@allegion.com
Central
(Arkansas, Illinois, Iowa, Kansas, Missouri,
Nebraska, Oklahoma)
Central.Quotes@allegion.com
Chicago
(Illinois-Northern, Wisconsin)
Chicago.Quotes@allegion.com
Florida
Florida.Quotes@allegion.com
Great Lakes
(New York, Pennsylvania)
GreatLakes.Quotes@allegion.com
Metro New York
Metro.Quotes@allegion.com
Technical Product Support
Mechanical Locks/Keying Systems
Mechanical_Locks_TechProdSupport@allegion.com
Exit Devices
Exits_TechProdSupport@allegion.com
Closers
Closers_TechProdSupport@allegion.com
Michigan
Michigan.Quotes@allegion.com
Mid Atlantic North
(New York, Pennsylvania)
Mid.Atlantics.north.quotes@allegion.com
Mid Atlantic South
(Delware, Maryland, New Jersey)
Mid.Atlantics.south.quotes@allegion.com
Midwest
(Indiana, Kentucky, Ohio, West Virginia)
Midwest.Quotes@allegion.com
Mountain States
(Colorado, Idaho, Montana, Nevada, Utah, Wyoming)
Mtn.States.Quotes@allegion.com
New England
(Connecticut, Main, Massachusetts, New Hampshire,
Rhode Island, Vermont)
NewEngland.Quotes@allegion.com
North Central
(Minnesota, North Dakota, South Dakota)
NorthCentral.Quotes@allegion.com
Northern California
NoCal.Quotes@allegion.com
Northwest
(Alaska, Oregon, Washington)
Northwest.Quotes@allegion.com
South
(Alabama, Georgia, Louisiana,
Mississippi, Tennessee)
South.Quotes@allegion.com
Southern California
(California-Southern, Hawaii)
SoCal.Quotes@allegion.com
Southwest
(Arizona, New Mexico)
Southwest.Quotes@allegion.com
Texas
Texas.Quotes@allegion.com
Electronic Products
Fax#: 1-800-452-0665
Email: Order_Entry_Schlage_Commercial@allegion.com
ProExpress
Fax#: 800-924-3551
Email: Order.Pro.Express@Allegion.com
Online: www.Allegion.com/us/proexpress
Price Book 7
Effective May 4, 2019 • Rev. 05/19
2
FastTrack
Fax#: 1-800-288-4242
Email: Order_Fasttrack@allegion.com
3
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Table of Contents
Contact Information ............................................2
General Terms ................................................4-7
Locks
Miscellaneous Information ..................................... 8
Finishes........................................................ 9
Forms & Examples ......................................... 14-27
Product Index ............................................169-172
MA Series ..................................................29-42
RU Series ..................................................43-56
T Series ....................................................57-70
X Series .....................................................71-78
K Series ....................................................79-84
D100 Series ............................................... 85-94
B Series ...................................................95-102
W Series ..................................................103-112
D200 Series...............................................113-124
H Series (Discontinued) ..................................125-130
H2 Series..................................................131-140
Cylinders ..................................................141-158
Auxillary Products........................................159-168
Exits
Finishes.......................................................174
Factors Affecting Exit Devices .................................175
New Nomenclature Conversion Chart..........................176
How to Order .............................................177-178
25 Series .................................................180-189
25 Series Options/Trims/Accessories/Parts ..............190-200
25 Series Exploded View .................................202-215
24 Series.................................................216-223
24 Series Options/Trims/Strikes/Accessories/Parts ...... 224-233
24 Series Exploded View ................................234-245
19 Series ................................................246-249
19 Series Options/Trims/Strikes/Accessories/Parts ......250-256
19 Series Exploded View.................................258-263
20 Series ....................................................264
1490 Series .............................................265-266
1590 Series ..................................................267
1590 Series ..................................................268
1490-1590 Series Exploded View ........................269-276
1690 Series ..............................................277-278
1690 Series Exploded View...............................279-281
1790 Series..............................................282-283
1790 Series Exploded View ..............................284-285
XX Series ...............................................286-295
XX Series Options/Trims/Strikes/Accessories/Parts......296-303
XX Series Exploded View.................................304-315
1990 Series .................................................. 316
1990 Series ...................................................317
1990 Series Exploded View...............................318-321
2090 Series..............................................322-323
2090 Series Exploded View ..............................324-327
2390 Series ..................................................328
2390 Series Exploded View .............................330-333
Exit Accessories .........................................334-335
Mullions/Mullion Options/Parts .........................334-335
Product Index ...........................................336-338
Closers
Available Finishes ............................................339
Common Applications .......................................340
SC Series Options ............................................ 341
SC60/SC60A Series Surface Mount ..........................342
SC70/SC70A Series Surface Mount ...........................343
SC80/SC80A Series Surface Mount ..........................344
SC90 Series Surface Mount ..................................345
OHC Series Concealed........................................346
8200 Series Auto Operator...................................347
8300 Series Actuators & Accessories .........................348
Electronics
Power Supplies .........................................349-350
Warranty..................................................... 351
4
Price Book 7
Effective May 4, 2019 • Rev. 05/19
General Terms and Conditions of Sale and Service
Allegion General Terms and Conditions of Sale and Service
1. GENERAL/ACCEPTANCE. (a) This Agreement contains the only terms and conditions by
which Company will quote and sell Deliverables to Customer; (b) The terms “purchase order”
or “order” for the purposes of this Agreement include the term “request for quotation,” as
appropriate; (c) This Agreement supersedes all pre-printed or boilerplate terms and conditions
set forth in any purchase order issued by Customer; (d) No reference herein to Customer’s
purchase order will in any way incorporate different or additional terms and conditions, all
of which Company hereby expressly objects to; (e) ANY ACCEPTANCE BY COMPANY OF
CUSTOMER’S PURCHASE ORDER IS EXPRESSLY CONDITIONED ON THE CUSTOMER’S
ASSENT TO AND ACCEPTANCE OF THE TERMS AND CONDITIONS CONTAINED IN THIS
AGREEMENT; (f) Company reserves the right to decline any order, in whole or in part, for any
reason.
2. ORDERS.
a. Order Processing. When Customer wishes to place an order for Deliverables, it will deliver to
Company a purchase order. All such purchase orders must (i) be in a written format acceptable
to Company, (ii) be legible, (iii) include a purchase order number, (iv) include Customer’s account
number, invoice address, ship to address, shipping method, shipper’s letter of instruction for
international shipments, part number, pricing, and designated contact information, (v) include,
if applicable, any special configuration ID numbers, necessary programming information, special
factory instructions, and requested specifications regarding a particular finish, handing, design,
backset, or strike, (vi) reference any applicable pricing discounts under an ongoing buying
program or based on a written quote from Company, along with the applicable buying program
number or quotation number, and (vii) not combine buying program and quoted product on the
same order.
b. Minimum Orders. In the event the order value does not meet any required minimum
net Deliverable value, Company may, at its sole discretion, (i) increase the quantity of items
in the order to meet the minimum net Deliverable value requirement; (ii) apply a minimum
order charge; (iii) reject the order, or (iv) waive the requirement, provided that the waiver of a
requirement for one order shall not constitute a waiver of the requirement for any future orders.
c. Acceptance of Purchase Orders. Company will endeavor to (i) acknowledge receipt of
each purchase order issued in accordance with this Agreement, and (ii) notify Customer whether
Company accepts or rejects the purchase order. If Company fails to accept or reject a purchase
order within a reasonable time period, such failure to respond will be deemed a rejection of the
entire order. Orders that combine buying program and quoted product on the same order will be
routed back to your local RSO office in order to review subject purchase order.
d. Changes to Order/ Cancellation of Orders. Additional terms and conditions regarding order
changes and cancellations are available on the Allegion customer website, WHICH TERMS
ARE EXPRESSLY INCORPORATED HEREIN BY REFERENCE. Unless otherwise provided
herein, Customer acknowledges that (i) requesting a Change Order may cause a delay in the
scheduled shipment date, a longer lead time or result in a new scheduled shipment date; (ii)
Orders may not be changed after 48 hours of Company’s order acknowledgment; (iii) After 48
hours of Company’s order acknowledgment, all changes to an accepted purchase order will be
subject to a Change Order charge of 25% of the net Deliverable value, plus the cost of labor and
fabrication or raw material that Company incurred prior to the receipt of the Change Order from
Customer, or that may be required due to the Change Order; (iv) the requested change may
result in additional charges for labor, fabrication, and raw material, and (v) if Customer cancels
an order or portion of an order that includes Deliverables that have been manufactured and
prepped for shipping, a 45% restocking fee will apply. Notwithstanding the foregoing, Customer
cannot change or cancel credential orders, reader orders, biometrics orders or any non-cataloged,
special, Custom or nonstandard items once they have been placed. All cancelled orders for a
Non Recurring Expense (NRE), credential orders, reader orders, biometrics orders, and/or Custom
orders will be subject to a cancellation charge of 100% of the acknowledged price.
e. Add-ons. Add-on orders will not be accepted. Additions to orders will be entered as
separate stand-alone orders and must qualify for all terms of sale, including discounts, on an
individual basis.
f. Fast-Track Orders. No changes or cancellations will be accepted on the 24-Hour Fast
Track Program. For 3-day Fast Track orders, changes and cancellations may only be requested
by Customer within 24 hours of Company’s order acknowledgment if the order has not shipped.
For 5-Day Fast Track orders, changes and cancellations may only be requested by Customer if
the order has not shipped and if the request is made to Company within 48 hours of Company’s
order acknowledgment. Return Material Authorization (RMA) for Deliverables must be processed
through Fast Track Customer Service.
g. Steelcraft Orders. For all Steelcraft orders, changes or cancellations are allowed without
penalty only if made within 48 hours of Company’s order acknowledgment, and provided that
the order has not shipped. Some exceptions do apply – please consult the factory. Changes
are not allowed on Rapid Program orders after the order has been entered and acknowledged.
After 48 hours of Company’s order acknowledgment, all changes or cancellations are subject to
a charge of 25% of the order. Unless otherwise specified by Company in writing, any changes
to orders acknowledged by Company that affect the delivery date will be deemed a new
order and will require acknowledgement by Company as provided in this Section. Additional
products, features, terms and conditions regarding the Rapid Program are available on the
Allegion customer website, WHICH TERMS ARE EXPRESSLY INCORPORATED HEREIN BY
REFERENCE.
3. PRICES, INVOICES AND PAYMENT.
a. Prices. The prices in Company’s Price Book are subject to change at any time, without
notice to Customer. Company may charge Customer additional amounts if Customer requests
special packing, marking, shipment, product modification, or engineering services. Oral prices
specified by Company are null and void. Quote numbers must be referenced on Customer’s
purchase order in order for the Company’s quoted pricing to apply. Orders that do not reference
a quote number will receive buy program pricing or book net pricing. Quoted prices are for those
specific products quoted for a specified job, and are subject to the Price Book in effect at the time
Company receives the order.
b. Taxes. Prices do not include any present or future federal, state or local property, license,
privilege, sales, use, excise, gross receipts or other like taxes or assessments which may result
from transactions or any services performed in connection therewith. Any taxes, charges,
or duties imposed by any governmental authority on the sale of Deliverables will be paid by
Customer, in addition to the selling price specified by Company. Credits for U.S. sales tax applied
to invoices will only be granted if valid exemption documentation is provided within 30-days
of the invoice date and a case is initiated by customer service. Exemption documentation
may be emailed to sales.tax.certificates@allegion.com, this e-mail address cannot be used to
request a credit for sales tax charged all such requests must be made with customer service.
All certificates sent to the e-mail address must include the following information: (1) Customer
account number(s); (2) Customer name; and (3) Allegion brand(s) the certificate should be
applied to.
c. Payment Terms. Company will deliver to Customer an invoice with each shipment of
Deliverables hereunder. Customer will pay all invoiced amounts within 35 days of the invoice
date (subject to any early pay discounts that may be offered to Customer by Company in its
sole discretion). Customer will make all payments in United States dollars. Past due invoices
will be subject to a late payment service charge of 1.5% per month on any overdue unpaid
balance, equivalent to 18% per annum, or the maximum rate permitted by law, whichever is
less. Customer shall reimburse Company for all costs of collection, including, without limitation,
reasonable attorneys' fees, for any overdue amount owed by Customer to Company, and such
collection costs shall also be subject to interest charges.
4. QUOTATIONS.
a. Project Quotations. Project or new construction quotes are restricted to the specific project
quoted for the quantities, finishes, and series of Deliverables referenced on the quote. Company
reserves the right to require proof of sale of Company products for any quoted project.
b. Stock Quotations. Deliverables fulfilling stock quotations may only be used for the
following: i) Stocking of the Customer’s shelves for small, quick-turn, discretionary projects, or
ii) Sale to a general contractor or installer for new construction. Stock quotations may not be
used for any project containing any Company no-substitution, specified products. Deliverables
purchased under Stock Quotations cannot be redistributed to other Customer branch locations
or re-sold to other resellers or used for aftermarket sales, end-user annual contracts or sold over
the counter to any walk in trade.
c. General. All quotes are subject to this Agreement, unless otherwise specified by Company,
and are subject to change at any time prior to Company’s acceptance of a purchase order
referencing the applicable quote number. Company, its representatives and employees reserve
the right, in their sole discretion and for any reason, to refuse a Customer’s request to quote a
price other than the standard list price, regardless of whether Company or its representatives
or employees have previously quoted discounted prices to the Customer on some or all of its
orders. Customer’s failure to comply with this Section 4 will be considered a material breach of
this Agreement, and will entitle Company to immediately terminate any purchase orders and/or
Customer’s ability to distribute Company’s products.
5. SECURITY INTEREST. Customer grants Company, and Company retains, a purchase
money security interest and lien on any and all of Customer’s rights, title and interest in each
Deliverable sold by Company to Customer, wherever located, until the invoice for the applicable
Deliverable(s) is paid in full, including any late charges and costs of collection. Customer
authorizes Company to, and will assist Company in, taking all necessary steps to perfect and
maintain Company’s interest in such Deliverables.
6. CREDIT TERMS. . Unless Customer pre-pays all of its purchase orders in advance, its
purchase orders will be subject to the credit limit and other terms of credit (“Credit Terms”) set
forth in Company’s credit application, which Credit Terms Customer acknowledges are subject
to change by Company at any time. Company reserves the right to request payment in advance
of shipment or any order or to request adequate assurances for Customer’s payment of an order
and may withhold or stop shipment, without any liability to Company, until Customer submits
payment or adequate assurance of payment.
7. RESALE OF DELIVERABLES. Customer agrees and warrants that it will offer Company
products in support of Company-written specifications and will maintain sufficient inventory
to adequately support End Users, installers, and/or general contractors’ needs. Company may
implement an MSRP or a resale pricing programs at any time in its sole discretion. Failure to
comply with such program(s) will be considered a material breach of this Agreement, and will
entitle Company to immediately terminate any purchase order and/or Customer’s ability to
distribute Company’s products. Customer shall, at its own expense, gain and maintain sufficient
knowledge of the industry and products competitive with Deliverables so as to be able to (a)
explain in detail to End Users, installers, and/or general contractors the differences between the
Deliverables and competing products, (b) ensure that an adequate number of trained, capable
and qualified technical personnel with sufficient knowledge of the Deliverables and who have
obtained all necessary licenses and permits are available to assist End Users, installers, and/or
general contractors, and (c) respond to such End Users, installers, and/or general contractors
with respect to the general operation and use of the Deliverables including, but not limited to,
(1) acting as a liaison between the End Users, installers and/or general contractors and Company
in matters requiring Company participation, (2) providing general product information and
configuration support on standard protocols and features, (3) collecting relevant technical
problem identification information, and (4) posting and distributing any warranty information
concerning the Products in accordance with Company’s instructions. Customer is responsible for
all service and support resulting from the re-sale of any Deliverable to End-Users, installers and/
or general contractors, examples of which may include, but are not limited to, support activities
such as installation, initialization, software set-up, training, trouble-shooting, technical support
and field service. In the event Customer is unwilling or unable to perform said support activities,
Company reserves the right to recover from Customer any and all expenses incurred by Company
to resolve the afore-mentioned End-User, installer and/or general contractor issues. Technical
product training is recommended for Customer in order to fully service and support Deliverables
purchased from Company that are resold to End-Users, installers and/or general contractors.
8. DEFAULT. If Customer is in default of payment or otherwise with respect to any purchase
order or other contract with Company, Company shall have the right, in addition to all other legal
remedies and without prejudice to any of its right hereunder, to defer further shipments under
that or any other purchase order until such default is corrected and to declare all outstanding
bills of Customer to be immediately due and payable.
9. INSPECTION AND DELIVERY.
a. Inspection. Customer will inspect all Deliverables immediately after receiving them.
Customer will be deemed to have accepted the Deliverables unless Customer notifies Company
in writing of any nonconformance within 10 days of delivery and provides Company written
evidence reasonably documenting that nonconformance. Inspection of Deliverables at
Company’s facility is not permitted.
b. Delivery. Delivery schedules for Deliverables are based upon current production capacities,
material or component availability, and inventory, and may be changed by Company as
conditions require. Delivery schedules for services are based upon Company’s prompt receipt
of, and prompt access to, Customer’s equipment and all information necessary to complete the
services. In no event will any delivery date be construed as falling within the meaning of “time is
of the essence.” Partial delivery shall be accepted by Customer and paid for at the price and on
the terms stated herein. Any partial delivery shall constitute a separate sale, and payment shall
be separately made when due. If any part of a delivery hereunder is not delivered by Company in
accordance with Customer’s purchase order, this Agreement shall not be affected thereby.
5
Price Book 7
Effective May 4, 2019 • Rev. 05/19Price
General Terms and Conditions of Sale and Service
10. TITLE & RISK OF LOSS. Unless otherwise specified by Company, (i) where the Customer is
located in the United States, all Deliverables will be sold “Uniform Commercial Code, FOB Origin,
Company’s factory”; and (ii) where the Customer is located outside of the United
States, all Products will be sold “Ex-works, Company’s factory (Incoterms 2010).” In either
instance, title and risk of loss will pass to Customer upon delivery to the carrier at Company’s
factory, provided, however, as set forth herein, Company shall retain a security interest in the
Deliverables until full payment has been made therefore, and Customer agrees, upon request,
to do all things and acts necessary to protect Company’s interest by adequately insuring
the Deliverables against loss or damage from any cause and to have Company named as
an additional insured. Customer will promptly provide Company with a copy of the relevant
certificate of insurance upon Company’s request.
11. SHIPPING.
a. Freight Charges. Company will ship all Deliverables in accordance with Company’s
freight shipment guidelines, which are set forth on the My Allegion Portal (“Freight Shipping
Guidelines”), WHICH TERMS ARE EXPRESSLY INCORPORATED HEREIN.
b. Rush Charges. Expedited order options are available as set forth in Company’s Freight
Shipping Guidelines.
c. Packing and Marking. Company will pack, mark, and ship Deliverables according to its
standard procedures for shipment, unless the parties agree, in writing, that Company will
comply with any special instructions provided by Customer. Special instructions may result in an
increased price.
d. International Shipments. For all international orders, a Shipper’s letter of instruction must
be submitted in writing with the order. Failure to do so will result in the order being rejected.
Complete adherence to this order requirement will be strictly enforced. Company will not be held
liable for any charges resulting from delays due to lack of complete required information being
supplied.
e. Once received by the Company, a purchase order cannot be combined with any other order
to increase average order size as it relates to Company’s Freight Shipping Guidelines. However,
for orders placed under Company’s FastTrack 24 Hour/5 Day Program (available for Schlage, Von
Duprin, LCN and Glynn-Johnson products); ii) FastTrack 24 Hour/3 Day Program (available for
Ives products); or ProExpress (available for specific product lines stated in the ProExpress price
book for Falcon, Ives, Glynn Johnson, LCN, Schlage and Von Duprin products), the applicable
brands or product categories may, subject to certain order requirements identified by Company,
be combined on a single order to increase average order size used in Company’s Freight Shipping
Guidelines.
12. CLAIMS. All claims must be submitted in writing to Company as follows: (i) All claims for
prices must be submitted within thirty (30) days from the date of invoice; (ii) All claims regarding
Deliverable quantity or incorrect orders must be submitted within ten (10) days from the date
of delivery; (iii) All claims for damage to Deliverables (while in the care, custody, and control of
Company) must be submitted within thirty (30) days from the date of invoice; (iv) All claims for
loss or damage to Deliverables while in the care, custody, and/or control of a carrier will be the
responsibility of Customer, unless otherwise agreed by the parties.
13. PRODUCT CHANGES. Company’s product policy is one of ongoing update and revision, and
accordingly, Company reserves the right to change, without notice, the design of, or the process
of manufacturing, the Deliverables covered by this Agreement.
14. PRODUCT USAGE LIMITATION. Customer agrees: (i) not to sell or use a Deliverable in any
manner contrary to the manner in which the Deliverable is intended to be used; and/or (ii) not
to modify the design of any Deliverable for use with another product without the prior written
consent of Company.
15. PRODUCT RETURNS. Unless otherwise agreed by the parties in writing, Deliverables
that are correctly furnished by Company per the purchase order may not be returned unless
Customer receives written authorization from Company. If returns are authorized by Company, a
return merchandise authorization (“RMA”) number must be provided by Company. Deliverables
identified under such RMA must be returned to Company within 90 days of issuance of the RMA.
Such RMA number and any accompanying RMA documents, the original invoice number, and
a written explanation for the return must be included with the returned Deliverables in order
for Company to inspect and approve a credit for the return. For warranty returns, a credit in
the amount of the original purchase price will only be issued if, after Company’s receipt and
inspection of the returned Deliverables, Company confirms, in its sole discretion, the defect is
valid and approves the return. For non-warranty returns/convenience returns, in the event
Company approves such a return, in its sole discretion, the following shall apply: (a) the total
amount of Deliverables requested to be returned shall be a minimum of $250.00; (b) a credit
will be made to Customer’s account in the amount of the original purchase price less freight and
a handling charge of 45% of the net material on the original invoice; and (c) only Deliverables
that are new, current, standard, non-obsolete, non-specially manufactured, unused, in their
original condition as at the time of sale by Company to Customer, in their original packaging and
in Customer’s inventory less than 180 days from the date of shipment by the Company, and not
ordered as part of a master key solution may be considered by Company for return. Such credit
will only be issued if, after Company’s receipt and inspection of Deliverables, Company approves
the return. The amount of final credit will be determined upon receipt at the factory and
following Company’s inspection and analysis of the condition of the returned material. Company
retains the right to deny credit to anyone for any reason.
16. CONFIDENTIAL INFORMATION.
a. Non-Use And Non-Disclosure. Customer shall not use the Confidential Information of the
Company except for the purpose of performing its obligations under this Agreement or exercising
the rights granted herein (the “Purpose”). Customer shall protect Confidential Information of
the Company from disclosure and unauthorized use in the same manner that it protects its own
Confidential Information, but in no event shall such standard of care be less than reasonable
care. Customer may disclose Confidential Information of the Company only to its employees who
require such information for the Purpose and who are subject to confidentiality obligations at
least as protective as those set forth herein.
b. Proprietary Information and Advice. (a) All designs, data, and specifications provided by
Company are proprietary and may not be disclosed or reused by Customer without the prior
written consent of Company; (b) Company assumes no obligation or liability for any advice given
by Company, the results obtained, or damages incurred as a result of such advice, and all such
advice is given and accepted at Customer’s risk.
c. Return. Upon the termination or expiration of a purchase order or this Agreement or upon
the request of the Company, the Customer agrees to end all further use of, to immediately
return to the Company the original version of, and to delete or destroy all copies of, any and all
Confidential Information of the Company.
17. TRADEMARKS. Except as agreed to by Company in writing, Customer agrees not to (a)
use Company’s name in any form of publicity; or (b) use, create, register or market, directly or
indirectly, in whole or in part, Company’s names, logos, brands, or any other trademarks, or
names that are now or may hereafter be owned by Company, as part of Customer’s corporate
or business name, as part of an internet domain name, uniform resource locator (URL), or in any
way connected with Customer’s business, trade address or other designations. Upon termination
of this Agreement or upon the request of company for any reason, any use of Company’s
trademarks or names will be immediately discontinued.
18. LIMITED WARRANTY.
COMPANY MAKES NO OTHER WARRANTIES EXCEPT THOSE STATED IN COMPANY’S
LIMITED WARRANTY IN EFFECT ON THE DATE COMPANY ACCEPTS EACH APPLICABLE
PURCHASE ORDER (“LIMITED WARRANTY”). THE LIMITED WARRANTY MAY BE
FOUND IN THE APPLICABLE PRICE BOOK AND ON THE ALLEGION CUSTOMER WEBSITE,
WHICH TERMS ARE EXPRESSLY INCORPORATED HEREIN BY REFERENCE. COMPANY
WILL MAIL CUSTOMER A HARD COPY OF THIS WARRANTY UPON CUSTOMER’S
WRITTEN REQUEST. IN THE EVENT THAT CERTAIN DELIVERABLE WARRANTIES ARE
NOT FURNISHED BY THE COMPANY TO CUSTOMER, COMPANY WARRANTS ONLY TO
CUSTOMER THAT THE DELIVERABLES WILL BE FREE FROM DEFECTS IN MATERIAL
AND WORKMANSHIP FOR A PERIOD OF 12 MONTHS FROM THE DATE OF SHIPMENT
OF THE DELIVERABLES. COMPANY’S SOLE OBLIGATION UNDER THIS WARRANTY
IS LIMITED TO REPAIRING OR REPLACING, AT COMPANY’S OPTION, THE DEFECTIVE
DELIVERABLE, PROVIDED WRITTEN NOTICE OF THE DEFECT OR NONCONFORMANCE
IS PROVIDED BY CUSTOMER WITHIN 30 DAYS OF DISCOVERY OF THE DEFECT OR
NONCONFORMANCE. COMPANY DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR
IMPLIED, WITH RESPECT TO THE DELIVERABLES, INCLUDING BUT NOT LIMITED TO,
ANY IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY, OR FITNESS
FOR A PARTICULAR PURPOSE.
a. Exclusions. The provisions of this Limited Warranty do not apply to Deliverables that: (A)
are not the proper size for the application; (B) are not installed in accordance with Company’s
published installation instructions; (C) are installed with improper or incorrect parts and/or
are used for purposes for which they are not designed or intended; (D) have been repaired or
altered without the Company’s prior written consent; (E) have been subjected to misuse, abuse,
negligence or accident; (F) have been improperly stored, installed, maintained or operated;
(G) have been used in violation of written instructions provided by Company to Customer; (H)
have been subjected to improper temperature, humidity, or other environmental conditions,
or (I) have been affected by normal wear and tear. In addition, the provisions of this Limited
Warranty do not apply to any defects or issues with the design or performance of equipment
or products not manufactured by Company, nor does it apply to any code compliance or permit
requirements for the assembly, installation, erection or construction of any goods. Company is
not responsible for loss or damage resulting from use of Deliverables in conjunction with parts or
systems not manufactured by Company. Accessories or products furnished by the Company, but
manufactured by others, shall carry whatever warranty the manufacturers have conveyed to the
Company and which can be passed to Customer.
b. Services. Company warrants that its services will be free from defects in material
and workmanship for a period of 12 months from the date of completion of the particular
items of service. Company’s sole obligation under this service warranty is limited to repair or
reperformance, at its option of the service, provided however, if repair or reperformance is either
impractical or impossible, the Company will refund to Customer that portion of the price paid to
Company for any defective service, provided written notice of the defect or nonconformance is
provided by Customer within 30 days of discovery of the nonconformance.
c. Notification. Customer agrees to immediately notify Company in writing if any claim is
made against Customer for any damages caused by any modules, parts, products, service or
other Deliverables which may be the direct result of any defect in the manufacture of such
aforementioned products. Customer agrees to cooperate with Company and its counsel in the
defense of such claim and Customer agrees not to settle such claim without Company’s written
consent. If Customer fails to notify Company of such claim or fails to cooperate in such defense
as aforesaid, then Company shall be discharged from any obligations under this Section and shall
have no further liability to Customer.
d. Exceptions. The following costs and expenses are not covered by the provisions of these
limited warranties: (i) labor costs for the removal and reinstallation of Deliverables or other
manufacturer’s products; (ii) shipping and freight expenses required to return Deliverables to
Company; (iii) normal maintenance; and (iv) economic losses. In addition, the provisions of this
warranty are not applicable to anything other than defects in Company’s material (products
only) or workmanship.
19. LIMITATION OF REMEDIES.
CUSTOMER’S EXCLUSIVE AND SOLE REMEDY ON ACCOUNT OF, OR IN RESPECT
OF, THE FURNISHING OF NON-CONFORMING DELIVERABLES, SHALL BE TO (A)
SECURE REPAIR OR REPLACEMENT OF THE PRODUCTS; OR (B) SECURE REPAIR
OR RE-PERFORMANCE OF THE SERVICES OR TO OBTAIN A REFUND OF THE PRICE
PAID FOR THE DEFECTIVE SERVICE, ALL AT COMPANY’S OPTION. IN NO EVENT
WILL THE COMPANY’S MAXIMUM LIABILITY EXCEED THE SELLING PRICE FOR THE
DELIVERABLE. THE WARRANTY, OBLIGATIONS AND LIABILITIES OF COMPANY
(INCLUDING ITS SUPPLIERS) AND THE RIGHTS AND REMEDIES OF CUSTOMER ARE
EXCLUSIVE AND ARE IN LIEU OF AND CUSTOMER HEREBY WAIVES AND RELEASES ALL
OTHER WARRANTIES, OBLIGATIONS, REPRESENTATIONS OR LIABILITIES EXPRESS
OR IMPLIED ARISING BY LAW, IN CONTRACT, TORT (INCLUDING NEGLIGENCE OR
STRICT LIABILITY) OR OTHERWISE, INCLUDING BUT NOT LIMITED TO (I) ANY IMPLIED
WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
OR ANY WARRANTY IMPLIED THROUGH COURSE OF PERFORMANCE, COURSE OF
DEALING, OR USAGE OF TRADE OR (II) CLAIMS ARISING OUT OF THE NEGLIGENCE OF
COMPANY OR COMPANY’S SUPPLIERS OR (III) ANY OTHER CLAIM ARISING OUT OF,
CONNECTED WITH, OR RESULTING FROM THE PERFORMANCE OF COMPANY OR FROM
THE DESIGN, MANUFACTURE, SALE, REPAIR, LEASE OR USE OF THE DELIVERABLE, OR
ANY COMPONENT THEREOF, DELIVERED OR RENDERED HEREUNDER OR OTHERWISE.
20. INDEMNIFICATION AND LIMITATION OF LIABILITY. a. Customer shall indemnify,
defend and hold Company, and its officers, directors, employees, customers, Affiliates,
suppliers, users and agents, (collectively the “Indemnitees”) harmless from and against any
and all damages, claims, losses, expenses, costs, obligations, liabilities, including without
limiting the generality of the foregoing, liabilities for court costs and attorneys’ fees, suffered
directly or indirectly by an Indemnitee by reason of, or arising out of any injury, death or loss
to any person, or injury to any property (collectively, “Damages”), received or sustained by any
person(s) or property, arising out of, occasioned by, attributable or related to i) any breach of
any representation or warranty made by Customer, its officers, directors, employees, affiliates,
users, agents, representatives or customers to Company or any third party, (ii) any failure by
Price Book 7
Effective May 4, 2019 • Rev. 05/19
6
General Terms and Conditions of Sale and Service
Customer to perform or fulfill any of its covenants, acts and/or omissions to Company or to
any third party, or (iii) any litigation, proceeding or claim by any third party relating in any
way to the obligations of Customer and/or the Deliverables sold by Company to Customer
hereunder. Customer shall not consummate any settlement of any indemnified claim without
the Indemnitees’ prior written consent. Customer’s obligation to indemnify Indemnitees will
continue in full force and effect notwithstanding the termination or expiration of any order
under this Agreement. In any claim against an Indemnitee by an employee of Customer or any
subcontractor or anyone directly or indirectly employed by any of them or anyone for whose
acts they may be liable, the indemnification obligations set forth in this Section shall not be
limited in any way by or for Customer or any subcontractor under any applicable worker’s
compensation act, disability or other employee benefit act, or insurance coverage. This provision
shall survive termination of any order or Agreement. IN NO EVENT WILL COMPANY, ITS
OFFICERS, DIRECTORS, EMPLOYEES, CUSTOMERS, AFFILIATES, USERS AND AGENTS,
(NOR COMPANY’S SUPPLIERS) BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL,
INDIRECT, SPECIAL, OR PUNITIVE DAMAGES OF ANY KIND OR NATURE UNDER ANY
CIRCUMSTANCES INCLUDING, BUT NOT LIMITED TO, LOSS OF USE OF THE PRODUCTS,
SERVICE INTERRUPTION, LOSS OF PROFITS, LOSS OF REVENUE, LOSS OF INTEREST,
LOST GOODWILL, LOSS OF DATA, WORK STOPPAGE, IMPAIRMENT OF OTHER GOODS,
LOSS BY REASON OF SHUTDOWN OR NON-OPERATION, INCREASED EXPENSES OF
OPERATION, OR CLAIMS OF CUSTOMER’S CUSTOMERS, OR ANY OTHER LOSSES
OR DAMAGES ARISING OUT OF ANY LACK OR LOSS OF USE OF THE DELIVERABLES
WHETHER BASED ON CONTRACT, WARRANTY, TORT (INCLUDING, BUT NOT LIMITED
TO, STRICT LIABILITY OR NEGLIGENCE), PATENT INFRINGEMENT, OR OTHERWISE,
EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
b) INTELLECTUAL PROPERTY INDEMNITY. Company makes no representation or warranty
to the Customer that the Deliverables shall not infringe any intellectual property rights including,
without limitations, claims arising from patent, copyright, trademark, trade secret, or other
intellectual property infringement. Customer agrees to hold Company harmless from and
defend the Company against any such claim of intellectual property infringement, including any
Damages resulting from that claim, the cost of complying with any preliminary or permanent
injunction, and all other costs of defense (including the attorneys’ fees and costs), in connection
with the foregoing.
c) To the extent that applicable law does not permit any limitations set out in this Agreement,
such limitation shall not be applied or invoked. Nothing in this Agreement will be interpreted
to disclaim liability of Company or the Indemnitees for gross negligence or willful misconduct.
The limitations of remedy and liability herein shall not be interpreted to affect Company’s
obligations, if any, for claims for (i) property damage, (ii) personal injury, or (iii) wrongful
death asserted by persons who are not parties to or beneficiaries of this Agreement. Further,
the limitations of remedy and liability herein shall not be interpreted to limit Company’s or
Customer’s right, if permitted by applicable law, to assert a claim for contribution among joint
tortfeasors in connection with a claim by a person who is not a party to this Agreement.
21. CERTIFICATIONS. Certification of Deliverables for compliance with UL and ANSI standards
are tested and performed by third-party independent laboratories. Any field modification or
alteration of certified Deliverables will void certification and Company is not liable to Customer
to certify any modified or altered Deliverable.
22. TERM FOR CLAIMS. NO ACTION ARISING OUT OF ANY CLAIMED BREACH OF THIS
AGREEMENT BY COMPANY MAY BE BROUGHT BY CUSTOMER MORE THAN ONE (1)
YEAR AFTER THE CAUSE OF ACTION HAS ARISEN.
23. CONSUMER PRODUCTS
WITH RESPECT TO “CONSUMER PRODUCTS” AS DEFINED UNDER THE MAGNUSON-
MOSS WARRANTY ACT (“MMWA”), THE FOLLOWING STATEMENTS ARE MADE.
(A) SOME STATES OR LOCAL LAWS DO NOT ALLOW LIMITATIONS ON HOW LONG
AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY
TO YOU; (B) IF ANY IMPLIED WARRANTY IS PROVIDED UNDER THE MMWA, IT IS
LIMITED TO THE DURATION OF THE WARRANTY PROVIDED IN SECTION 18 ABOVE.
(C) SOME STATES OR LOCAL LAWS DO NOT ALLOW THE EXCLUSION OR LIMITATION
OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR
EXCLUSION MAY NOT APPLY TO YOU; AND (D) THIS WARRANTY GIVES YOU SPECIFIC
LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE
TO STATE OR LOCATION TO LOCATION.
24. FORCE MAJEURE/EXCUSABLE DELAY. Any delay or failure of Company to perform its
obligations hereunder will be excused to the extent that it is caused by an event or occurrence
beyond Company’s control such as, by way of example and not by way of limitation, acts of
God, acts by any governmental authority (whether valid or invalid), governmental laws and
regulations not presently in effect, fires, floods, windstorms, explosions, riots, natural disasters,
wars, sabotage, accidents, labor problems (including, without limitation, lockouts, strikes, and
slowdowns) at Company’s facility, its source plant or their suppliers, inability to obtain power,
material, labor equipment, or transportation, or court injunction or order. The delivery date will
be extended for a time equal to that of the delay and the schedule for Company’s performance
will be deemed adjusted to that effect.
25. ENTIRE AGREEMENT AND AMENDMENT. This Agreement, together with the
attachments, exhibits, webpages, or supplements specifically referenced and incorporated
herein, constitute the entire agreement between Company and Customer with respect to
the matters contained herein and supersede all previous communications, representations,
or agreements, either oral or written between Company and Customer. No agreement or
understanding varying or expanding this Agreement will be binding upon either party unless it is
in writing and signed by a duly authorized representative of each party hereto.
26. CONFLICTS. In the event of any conflict or inconsistency between the terms of any
agreement, or any part of an agreement or the various documents (including, but not limited to,
electronic documents) between Company and Customer, unless the parties agree otherwise in
writing, the various components of the agreements shall be given the following precedence (in
descending order of precedence): a) any master agreement or long term agreement between
Company and Customer; b) any specific terms, conditions and/or warranties of the individual
products or Deliverables; c) the terms and conditions of this Agreement, and d) any purchase
order.
27. UNSATISFACTORY CREDIT/TERMINATION FOR INSOLVENCY OR DEFAULT.
Customer shall furnish Company with statements evidencing Customer’s financial condition as
Company may, from time to time, reasonably request, and shall notify Company immediately of
any and all events that may have a material adverse effect on Customer’s business or financial
condition. If Company determines, in its sole discretion, that Customer’s financial condition or
creditworthiness is inadequate or unsatisfactory, then in addition to Company’s other rights,
Company may without liability or penalty, take any of the following actions: (i) modify the
payment terms for any outstanding and/or future purchases; (ii) cancel any previously accepted
orders; (iii) delay any further shipment of Deliverables to Customer; or (iv) any combination of
the above.
Company may immediately terminate an order from Customer by giving written notice to
Customer in the event of the happening of any of the following or any other comparable event:
(i) insolvency of the Customer; (ii) filing of a petition in bankruptcy by or against the Customer;
(iii) appointment of a receiver or trustee for the Customer; (iv) execution of an assignment for
the benefit of creditors by the Customer, all of which will allow Company to demand reclamation
of all affected orders; (v) Customer ceases or threatens to cease to trade; (vi) Company
determines that Customer does not meet or no longer meets the credit requirements of
Company or Customer’s credit account is closed; (vii) any Customer violation of law, specifically
including, without limitation, those laws set forth in this Agreement.
In the event of termination in accordance with this section, Company will not be obligated to
accept any existing or additional orders from Customer and Company will be released from
its obligation to deliver under orders accepted prior to such termination. The rejection or
termination of any order by Company will not entitle Customer to any termination or severance
compensation, or to any payment in respect to any goodwill established by Customer, or render
Company liable for damages on account of the loss of prospective profits, or on account of any
loss, expenditure, investment or obligation incurred or made by Customer.
No action taken under this Section 27 by Company (nor any failure of Company to act under
this Section 27) will constitute a waiver by Company of any of its rights to enforce Customer’s
obligations, including the obligation of Customer to make payments as required under this
Agreement. Upon termination of any order, all amounts owed by Customer to Company will
become immediately due and payable, whether or not otherwise then due or payable.
28. CREDIT RISK ON RESALE OF DELIVERABLES. Customer is responsible for all credit risks
with respect to, and for collecting payment for, all Deliverables sold to third parties (including
End Users, installers, and/or general contractors) whether or not Customer has made full
payment to Company for such Deliverables. The inability of Customer to collect payment for any
Deliverable shall not affect Customer’s obligation to pay Company for any Deliverable.
29. GOVERNING LAW; VENUE; AND EXPENSES. Any dispute or claim relating to this
Agreement shall be governed by and construed according to the laws of the State of Indiana
(excluding its conflict of laws principles); and not by the provisions of the 1980 United Nations
Convention on the International Sale of Goods. Any disputes or claims shall be instituted
and maintained in the courts of the State of Indiana. Customer consents to the exercise of
jurisdiction over it by such courts and agrees that Indiana is not an inconvenient forum for any
action arising from or relating to this Agreement. Customer agrees to pay for all expenses
(including, but not limited to, collection costs, court costs and attorneys’ fees) incurred by
Company in enforcing the obligations of Customer under this Agreement.
30. RELATIONSHIP OF THE PARTIES. Nothing in this Agreement or any other document
creates an employment, partnership, joint venture, or agency relationship between Company and
Customer, including that of franchisee/franchisor. No party will have any power or authority to
enter into any commitment on behalf of or otherwise bind the any other party on any matter.
No employee of Customer will be deemed to be an employee of Company. If any provision of
this Agreement is deemed to create a franchise relationship or business opportunity between
the Parties, then Company may terminate any purchase order or this Agreement or the Parties
shall negotiate in good faith to modify this Agreement so as to effect the original intent of the
Parties as closely as possible in a mutually acceptable manner in order that the transactions
contemplated hereby are consummated as a reseller agreement and not a franchise or business
opportunity agreement.
31. SETOFF. Customer does not have the right to setoff or to back charge against any amounts
which become payable to Company under this Agreement or otherwise. Company will not
accept responsibility for backcharges for the cost of material or labor by Customer or any third
party.
32. ELECTRONIC COMMUNICATIONS AND ELECTRONIC SIGNATURES. Both parties
expressly agree to electronic transactions and acknowledge that documents they sign
electronically will bind them to the same extent as a paper signature. Customer represents
and warrants to Company that only employees authorized to bind Customer legally shall
electronically sign any document under this Agreement. Customer shall comply with any
method of electronic communication/payment processing specified by Company, including
electronic funds transfer, pay-on-receipt processes/systems, order transmission, releases,
electronic signature, and electronic communication systems, including, without limitation, the
use of electronic data interchange (“EDI”) portals. Notwithstanding the foregoing, e-mails, even
those containing a signature block of one of Company’s representatives, shall not constitute a
signed writing.
33. COMPLIANCE WITH APPLICABLE LAWS.
a. General. Company and Customer will comply with all applicable federal, state and
municipal laws, regulations, codes, ordinances and orders that pertain to the Deliverables,
including but not limited to full compliance with any applicable provisions of The Health
Insurance Portability and Accountability Act. Where the Customer is located outside the
United States, or where the customer intends to ship the product outside the United States,
the Customer shall be responsible for compliance with all U.S. export laws, and for filing all U.S.
Electronic Export Information, as applicable.
b. The Customer acknowledges and agrees that: (i) it shall not violate applicable laws and
regulations in performing its duties under this Agreement; (ii) it does not and shall not engage in
any conduct that shall violate any applicable anti-bribery or anti-corruption laws or regulations;
(iii) it (and its owners, officers, directors, employees and agents) shall not pay, offer, promise or
authorize the payment of, either directly or indirectly, anything of value (including but not limited
to cash, gifts and entertainment) to (a) any government official or employee of any government;
(b) any official or employee of any department, agency, or instrumentality of a government;
(c) any employee of any corporation or entity owned or controlled by a government; (d) any
family member of such officials or employees; (e) any political party, party official, or political
candidate; or (f) any other persons, owners, officers, directors, employees and agents of any
corporation or entity; to improperly or illegally assist in obtaining or retaining business (including
but not limited to any contracts, avoidance of duties or reduction of tariffs, reduction of taxes or
7
Price Book 7
Effective May 4, 2019 • Rev. 05/19
General Terms and Conditions of Sale and Service
to obtain money owed, or to obtain regulatory approval) or for the purpose of causing, soliciting
or inducing the sale and purchase of the Deliverables by any party, and (iv) it has full knowledge
of and will comply with the Company’s Code of Conduct for Business Partners as set forth on the
Allegion customer website, WHICH IS HEREBY INCORPORATED BY REFERENCE.
c. The Customer shall indemnify and hold the Company harmless from any claim, demand,
expense or cost arising from any breach of this Article.
d. The Customer shall permit the Company to conduct an audit or review of the Customer’s
financial books and records and business operations at such other times that the Company
considers it necessary to confirm compliance with this provision. Such audit may be conducted
by representatives of the Company or, at the Company’s sole discretion, by a certified public
accounting firm selected by the Company. The Customer shall cooperate with any inquiries from
the Company’s Ethics & Compliance Group.
e. A violation of this provision constitutes a material breach of this Agreement and the
Company may terminate any purchase order or this Agreement immediately, with no opportunity
to cure, in accordance with Section 27 of this Agreement.
f. Notwithstanding the foregoing provisions of this Section 33, (i) Company is not responsible
for obtaining or maintaining any permits for the performance of services or the verification
or compliance with any code requirements relative to the performance of services, (ii) to the
extent any sale of Deliverables pursuant to this Agreement may require approval of the U.S.
Government, Company’s obligations under this Agreement are conditioned upon the grant of
such approval and upon compliance by Customer with any restrictions imposed by the U.S.
Government in connection with such approval, and (iii) in the event the Deliverables are to
be used in a nuclear facility, the Customer shall, prior to such use, arrange for insurance or
governmental indemnity protecting Company against liability. The Customer hereby releases and
agrees to indemnify Company and its suppliers for any nuclear damage including, but not limited
to, loss of use, in any manner arising out of the nuclear incident, whether alleged to be due, in
whole or in part by Company or its suppliers.
g. No Inducements. Each party represents to each other that neither it nor any person
acting on its behalf has, in contravention of any applicable law, given or offered to give or will
give or offer to give, any sum of money or other material consideration to any person, directly
or indirectly, as an inducement to obtain business hereunder or to influence the granting of
licenses or other governmental permissions to enter into this Agreement or perform obligations
hereunder.
h. Equal Employment Opportunity. Company is a U.S. federal contractor that complies with
Executive Order 11246, as amended, and applicable regulations in 41 CFR Parts 60-1 through
60-60, 29 U.S.C. § 793 and applicable regulations in 41 CFR § 60-741; and 38 U.S.C. § 4212 and
applicable regulations in 41 CFR Part 60-250 and 60-300. THE FOLLOWING PROVISIONS
ARE INCORPORATED HEREIN BY REFERENCE: Executive Order 11246, as amended by
Executive Order 13672, and 41 CFR § 60-4.3(a); Executive Order 11701 and 41 CFR §§ 60-250.5(a),
60-300.5; Executive Order 11758 and 41 CFR § 60-741.5(a); U.S. immigration laws, including the
L-1 Visa Reform Act of 2004 and the H-1B Visa Reform Act of 2004; and Executive Order 13496.
i. Ethical Business Conduct. Customer shall adopt and comply with Company’s Business
Partner Code of Conduct which is EXPRESSLY INCORPORATED HEREIN BY REFERENCE.
34. REPRESENTATIONS AND WARRANTIES. Customer represents, warrants and covenants
to Company that: (a) it has the right, power, and authority to enter into this Agreement and fully
perform its obligations hereunder; (b) it has all necessary rights in and to its respective Content
and Marks for use within the scope of this Agreement, including the licenses granted herein; and
(c) it complies, and at all times shall comply, with all laws, rules, and regulations in effect that
are applicable to its performance under this Agreement, including obtaining all such approvals
and/or permits as may be required hereunder.
35. NO THIRD-PARTY BENEFICIARY. Each party is entering into this Agreement solely based
on the representations contained herein for its own purposes and not for the benefit of any third
party.
36. NOTICES AND CHANGE OF ADDRESS. All notices or other communications under this
Agreement shall be in writing and delivered in person, or sent by receipted courier, express mail,
e-mail, or postage prepaid certified or registered mail, addressed to the party for whom it is
intended, at the addresses set forth in this Agreement. Either party may change its address for
notice by giving written notice to the other party. Any notice or other communication shall be
deemed given no later than the date actually received. Notice by courier, express mail, certified
mail, or registered mail shall be deemed given on the date it is officially recorded as delivered
and, in the absence of such record of delivery, it shall be rebuttably presumed to have been
delivered on the third Business Day after it was deposited. Notices sent by e-mail require tangible
confirmation of receipt from addressee.
37. ASSIGNMENT. Customer may not assign this Agreement without the prior written consent
of Company. Company may assign its rights and delegate its duties under this Agreement,
without the prior consent of Customer, to an Affiliate, or to a third party in the event of a spin-
off, merger, business combination, consolidation or sale of all, or substantially all, of its assets or
business that are related to this Agreement. The rights and duties in this Agreement shall bind
and inure to the benefit of any such assignee.
38. SEVERABILITY. If any provision of this Agreement is held to be invalid, illegal, or
unenforceable under any statute, regulation, ordinance, executive order, or other rule of law,
that provision will be deemed severed to the extent necessary to comply with such statute,
regulation, ordinance, order, or rule. In the event such provision is deemed severed, the parties
will negotiate in good faith to arrive at an alternative arrangement approximating the original
business objective of the parties. The remaining terms and conditions of this Agreement will
remain in effect.
39. NO IMPLIED WAIVER. The failure of either party at any time to require performance by
the other party of any provision of this Agreement will in no way affect the right to require
such performance at any time thereafter, nor will the waiver of either party of a breach of any
provision of this Agreement constitute a waiver of any succeeding breach of the same or any
other provision.
40. MISCELLANEOUS. (a) This Agreement does not make either party the agent or legal
representative of the other party. Neither party is authorized to create any obligation on behalf
of the other party including, but not limited to, the obligation for payment of any service or
warranty obligation hereunder; (b) The rights and remedies herein reserved to Company are
cumulative and additional to any other rights and remedies provided at law or equity; (c) The
official text of this Agreement is in the English language. If this Agreement is translated into
another language, the English text will govern any question with respect to interpretation;
(d) The headings in this Agreement are for convenience of reference only and do not affect the
meaning of this Agreement in any manner.
DEFINITIONS.
Capitalized terms have the meanings set forth in this Section, or in the Section in which they first
appear in this Agreement.
“Agreement” means these Allegion Terms and Conditions of Sale and Service, together with
any applicable Country Supplement or Region Supplement provided by Company, and all of the
documents referenced herein or therein.
“Affiliate” means any Person that directly or indirectly, through one or more intermediaries,
controls, is controlled by, or is under common control with, the Company. The term “control”
(including the terms “controlled by” and “under common control with”) means the possession,
directly or indirectly, of the power to direct or cause the direction of the management and
policies of a Person, whether through the ownership of voting securities, by contract or otherwise.
“Business Day” means any day except Saturday, Sunday or any other day on which commercial
banks located in the United States are authorized or required by Law to be closed for business.
“Company” means Schlage Lock Company, LLC or any subsidiary or affiliate thereof selling
products that are part of the Allegion product portfolio. Schlage Lock Company and/or its
subsidiary or affiliates will be severally but not jointly liable under the Agreement.
“Company Marks” refers to the Marks of Company.
“Confidential Information” shall mean any and all information provided by either party to
the other party pertaining to the disclosing party’s business. Confidential Information shall
include, but not be limited to, any bitting lists, formulae for products, manufacturing processes,
production techniques, packaging processes, methods, research materials, ideas, marketing
plans and related materials, quality standards, test results and data, apparatus, engineering
drawings, contract documents, computer software, hardware, or firmware, business activities
information such as financial information, reports, projections, books and records, customer and
supplier information, and operations, customer and supplier lists and data, specifications, know
how, and other Proprietary Information or Trade Secrets (as defined herein) that either party
may furnish to the other party. Confidential Information shall not include information that:
(a) is or becomes publicly known if such public knowledge or disclosure is not the result of any
act or failure to act on the part of the receiving party; (b) is, at the time of disclosure, already
known to the Receiving Party without utilizing the Confidential Information; (c) is information
disclosed to the Receiving Party by a third party which is not to the Receiving Party’s knowledge,
after inquiry of the third party, under a duty of confidentiality to the Disclosing Party; or (d) is
independently developed by the Receiving Party without the use of Confidential Information.
The Receiving Party shall have the burden of proof as to prior knowledge and absence of breach.
Confidential Information may be furnished in any tangible or intangible form including, but not
limited to, writings, drawings, computer and other electronic media, logic diagrams, component
specifications, graphs, prototypes, samples, or verbal communications and regardless of
whether such information is marked or designated as “confidential.” For the avoidance of
doubt, all information, knowledge or data disclosed by Company to Customer, regardless of
whether disclosed in written, tangible, oral, visual or other form, including, without limitation,
sample products, equipment, software, or other objects or material, provided by Company to
Customer, and all information, knowledge or data which was obtained by Customer from visits
to Company’s facilities, shall be considered “Confidential Information” under this Agreement.
“Content” means all information (including without limitation any text, music, sound,
photographs, video, graphics, data or software), in any medium, on a particular Company Web
page or Website or in Marketing Materials.
“Customer” means the purchaser of Deliverables from Company.
“Deliverables” means any good or service or both purchased by Customer from Company under
these General Terms and Conditions of Sale and Service.
“End Users” means the purchaser that (a) has acquired a Deliverable from Customer for (i) its
own and its Affiliate’s/Affiliates’ internal use and not for resale, remarketing or distribution or
(ii) incorporation into its own products and (b) is an individual or entity, other than any federal,
state or local agency, office or division.
“IP” means all intellectual property and industrial property rights comprising or relating to/
of the following: (a) Patents; (b) Trademarks; (c) internet domain names, whether or not
Trademarks, registered by any authorized private registrar or Governmental Authority, web
addresses, web pages, website and URLs; (d) works of authorship, expressions, designs and
design registrations, whether or not copyrightable, including copyrights and copyrightable
works, software and firmware, application programming interfaces, architecture, files, records,
schematics, data, data files, and databases and other specifications and documentation; (e)
Trade Secrets; and (f) all other intellectual property and industrial property rights, and all rights,
interests and protections that are associated with, equivalent or similar to, or required for the
exercise of, any of the foregoing, however arising, in each case whether registered or unregistered
and including all registrations and applications for, and renewals or extensions of, such rights or
forms of protection pursuant to the Laws of any jurisdiction throughout in any part of the world.
“Marketing Materials” means all marketing brochures, buckslips, pamphlets, emails, text, call
scripts or other material, whether in printed format, audio or audiovisual format, or in any other
format, that contain any (i) Content relating to the Company Deliverables or (ii) Company Marks.
“Marks” means collectively the domain names, trademarks, trade names, service marks,
trade dress, logos, and the like used or provided by either party for use in connection with this
Agreement.
“Patents” means all patents (including all reissues, divisionals, provisionals, continuations and
continuations-in-part, re-examinations, renewals, substitutions and extensions thereof), patent
applications, and other patent rights and any other Governmental Authority-issued indicia of
invention ownership (including inventor’s certificates, petty patents and patent utility models).
“Person” means a person or entity.
“Price Books” mean Company’s current Price Book in effect for the applicable Deliverable being
purchased by Customer.
“Trade Secrets” means and includes business or technical information of either party, including
processes, formulas, devices, techniques, compilations and other material that a party attempts
to maintain in secret and that derive commercial value for such party from not being generally
known to the public or readily ascertainable through independent development or reverse
engineering.
8
LOCKS
Prices subject to change without notice
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Miscellaneous Information
LOCKS FOR THICK DOORS
Many Series of Falcon locks are available for doors over 1-3/4" thick. Consult the options section for each series for available door
thicknesses and charges.
LEAD-LINING OR LEAD-WRAPPING
T and RU Series locksets and latchsets are available lead-lined. MA Series locksets are available lead-wrapped. Consult the options
section for each series for availability and charges.
ABRASIVE COATING AND KNURLING
Abrasive coated or knurled knobs or levers are available for most Falcon locksets and latchsets. Consult the options section for each
series for availability and charges.
MOUNTED LOCK SAMPLES
Individual mounted samples are available for all lock series. The samples are mounted on a mount block and are fully operative thus
allowing demonstration of each functions’ individual features. There is a nominal charge for the mount block. There is no charge for
mounting of the hardware. See page 168 for mount selection.
SET OF FINISH SAMPLES
One (1) of each finish on 1-1/4" diameter disks attached together with a bead chain.
Finishes Included: 605, 606, 612, 613, 625, 626 & 630. Contact your RSO representative for availability.
COMPETITORS’ KEYWAYS
A selection of standard keyways of other lock manufacturers is available as listed below (6-pin only). Consult options sections of each
series for availability. (Not available in any mortise and rim cylinders, except Schlage C, or factory master keyed.)
Furnished 0-Bitted unless otherwise specified. KD option is not available for locks containing 2 cylinders.
INTERCHANGEABLE CORES
The “A” keyway is standard for IC products and will be supplied unless otherwise specified. A, B, C, D, DD, E, F, G, H, J, K, L, M, N, Q, R,
TB, TD are equivalent to Best and Arrow IC keyways of the same names. Consult Allegion Customer Service for restricted keyways not
listed here. Conventional cylinders are not compatible with interchangeable core.
COMPETITORS’ CORES
Falcon standard IC preps accept Arrow (including Flex-Core), Best (including PKS, Peaks and Cormax®), InstaKey, Kaba Peaks,
Keymark and KSP cores. Other brands of interchangeable cores are compatible with T and RU Series locksets. See those sections for
details.
CONVENTIONAL CYLINDERS
The “G” keyway is standard for conventional cylinder products and will be supplied unless otherwise specified. E, H, K, L, N and P are
also available. Consult Allegion Safety Customer Service for restricted keyways and other keyways not listed here.
* Interchangeable core not compatible with conventional cylinders
RESTRICTED KEYWAY POLICY
All keyways not listed in the above statements defined as standard keyways are considered RESTRICTED. Falcon requires a minimum
cylinder order size to qualify for a defined geographic area restricted key system. A letter of authorization is required for the purchase
of keys, locks or cylinders (to include plugs) for a restricted keyway. Contact 877-671-7011 for availability.
Manufacturer Keyway Keying Options
Corbin Russwin 60 O Bitted, KD
L4 O Bitted, KA4
Russwin D1 O Bitted, KD
Sargent LA O Bitted, KD
Schlage CO Bitted, KD, KA4
EO Bitted
Yale 8 (Para) O Bitted, KD
9
LOCKS
Prices subject to change without notice
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Miscellaneous Information
FINISHES
Although we apply the finest available protective plating and/or enamel coating to the surface of our products, these finishes have
limitations and in time may deteriorate either from exposure to weather, pollution, perspiration, extremes of climate, frequency of use
or other factors. Deterioration of these finishes is, therefore, not a defect, but a normal process which is unavoidable. Our Company
cannot accept responsibility for finish deterioration in these circumstances and therefore the finishes cannot be guaranteed. These
products will not be refinished or replaced under our warranty should deterioration of finishes occur.
Some finishes are not suggested for areas that are subject to corrosive climate or chemical conditions. We recommend chrome plated
or stainless steel finishes for these areas.
* 605 Finish is not recommended for corrosive climates.
** Oil rubbed bronze (613) is considered a category “B” finish by ANSI/BHMA and will vary in color when applied to different alloys and forms of base material. 613 will
also vary from production lot and additionally from one manufacturer to another. Oil rubbed bronze will wear off over time due to the “rubbed” finishing method
that has no protective coating or plating.
Please refer to price columns for each lock series for finish availability.
HOW TO SPECIFY FINISHES
STRAIGHT FINISHES: When the finish is to be the same for both sides of the door.
EXAMPLE: 40 EA. 511HG 626
SPLIT FINISHES: Split finishes are available on all models except for H and Padlocks. Finish may vary from one side of the door to the
other and will be priced at the highest list price of the design/finish chosen.
EXAMPLE: 40 EA. X301TG 606 x 625 (Outside finish is always specified first)
MARKING CARTONS
Markings (e.g., door number, stock reference numbers) on individual product cartons will be provided with no charge.
ANSI/BHMA
Finish
Code
U.S. Standard
Code Description
605* 3Bright Brass - Clear Coated
606 4 Satin Brass - Clear Coated
612 US10 Satin Bronze
613** 10B Satin Bronze; Dark Oxidized and Oil Rubbed
619 US15 Satin Nickel
622 Matte Black
625 26 Bright Chromium
626 26D Satin Chromium
630 32D Satin Stainless Steel
643E US11 Aged Bronze
Price Book 7
Effective May 4, 2019 • Rev. 05/19
10
LOCKS
Prices subject to change without notice
Notes
11
Price Book 7
Effective May 4, 2019 • Rev. 05/19
LOCKS
Prices subject to change without notice
* X Series chassis only.
** SFIC = Small format interchangeable core
Note 1) Failure to use the above fax numbers or mailing address will delay processing of your order.
WHERE TO SEND ORDERS
Type of Order Fax No. Mailing Address
Factory 888-840-7732 (West)
888-840-7735 (East)
Falcon Lock
3899 Hancock Expressway
Security, CO 80911
877-671-7011
PRODUCT IDENTIFICATION CODING
Latch Suffix
D Deadlatch
S Springlatch
Cylinder Suffix
P 6 pin cylinder, keyed to 5 chambers
L Less cylinder
B Less SFIC
BDC Disposable construction core, plastic (SFIC**)
J FSIC core prep (competitor’s full-size IC, designate competitor in
“Additional Details” of Order Form)
G SFIC (Old Falcon designation = WIC)
H Construction Core SFIC (brass, keyed)
BB Best Syle Capped Core (SFIC)
CP6 Schlage C Keyway
Trim and Chassis Prefix
6 Abrasive Lever (6DA = Dane Lever x abrasive strip)
8 Knurled (8TG = Troy-Gala knob trim x knurled lever or knob)
9 Lead-Lined (9AV = Avalon lever x lead-lining of levers (and/or chassis)
XC Corrosion resistant chassis (XC561 = X corrosion resistant chassis,
classroom function)*
Price Book 7
Effective May 4, 2019 • Rev. 05/19
12
LOCKS
Prices subject to change without notice
To order Falcon products, descriptive data should be in the same sequence as shown:
Line
Item Qty Product
Outside Inside
Hand Latch Strike Dr. Thk Ext DIM Additional DetailsDES FIN DES FIN
1 2 3 4 5 6 7 8 9 10 11 12 13 14
1. LINE ITEM: Line item number
2. QTY: Quantity
3. PRODUCT: Complete lock product or part number
4. OUTSIDE DES: Outside design code
5. OUTSIDE FIN: Outside finish code
6. INSIDE DES: Inside design code. Leave blank if same as outside design code.
7. INSIDE FIN: Inside finish code. Leave blank if same as outside finish code.
8. HAND: Hand of door. Only one hand allowed per line item.
Example: RH = Right Hand, LH = Left Hand, RHR = Right Reverse, LHR = Left Reverse.
9. LATCH: Latch. Leave blank for standard or specify part number if non-standard latch is
required. LLL = Less Latch.
10. STRIKE: Strike. Leave blank for standard or specify part number if non-standard strike is required. LLL =
Less Strike.
11. DR THK: Door Thickness. Enter door thickness if non-standard. Example: 138 = 1-3/8",
214 = 2 1/4", 212 = 2 1/2".
12. EXT: Extension. Enter one of the following when doors 2" thick or greater are specified:
EE = Extended Equally
EI = Extended Inside
EO = Extended Outside
ED = Extended Differently
EI or EO assumes the latch will be centered on a 1-3/4" door, to which material has been added.
13. DIM: Enter dimension for non-standard strike lip length and mortise cylinder or blocking ring length.
012 = 1/8" 118 = 1-1/8"
018 = 3/16" 114 = 1-1/4"
025 = 1/4" 138 = 1-3/8"
031 = 5/16" 112 = 1-1/2"
037 = 3/8" 158 = 1-5/8"
050 = 1/2" 134 = 1-3/4"
078 = 7/8" 200 = 2"
100 = 1" 400 = 4"
14. ADDITIONAL DETAILS: Enter detail for keying information and for special requirements.
How to Determine Hand of Door
RHR
LHR
13
Price Book 7
Effective May 4, 2019 • Rev. 05/19
LOCKS
Prices subject to change without notice
Line
Item Qty Product
Outside Inside
Hand Latch Strike Dr. Thk Ext DIM
Additional
Details/KeyingDES FIN DES FIN
Ten B-Series storeroom locks with a Dane outside lever in 605 and Dane inside lever in 626, with a 2-3/8 radius face
latch and full lip radius strike, 6-pin standard cylinder, G keyway.
2 10 B581PD6 DAN 605 DAN 626 57421 5104-1
Four T-Series entry office locks with an Avalon lever in 613, standard latch and strike, 5-pin standard cylinder, G keyway
3 4 T511PD AVA 613 98535 5164 134
Three T-Series entry office locks with a Quantum lever in 605, abrasive outside lever, standard latch and strike,
for 2-1/4" thick doors, 6-pin standard cylinder, G keyway, masterkeyed to new system, with 3 keys each.
Provide 2 masterkeys.*
Note: Masterkeying charges and extra cut key charges will be added to the applicable lock/cylinder order line and list price of lock will be adjusted.
Charges will not be shown separately on acknowledgements or invoices.
4 3 T511PD6 6QU 605 QUA 98535 5164 214 G Keyway, w/3 keys ea.
5 2 KB578 G Section, master key
6 3 50-215 Extra cut keys charges
7 3 50-210 Master keying charges
Two X-Series dormitory locks with a Troy knob and Gala rose in 606, 7-pin SFIC, A keyway, 0-bitted, one
control key, less strike.
8 2 X571BD7 TG 606 98535 LLL A-000000
9 1 KB609-2 A Section
control key 0-bit
Two MA-Series dormitory locks with a Hana knob and Gala rose in 625, right hand, lead-lined, 6-pin SFIC, A keyway, construction
core, one control key, two change keys.
10 2 MA571HDG 9HG 625 RH
11 2 KB632-1 CCA A Section
const. change key
12 1 KB609-1CCA A Section
const. ctrl. key
One MA-Series dormitory locks with a Hana knob and Gala rose in 625, left hand reverse, knurled outside knob,
6-pin SFIC, disposable construction core.
13 1 MA571BDC 9HG 625 LR
Five W-Series classroom locks with a Dane lever in 626. Standard latch and strike. 6-pin Schlage C keyway,
Keyed Different.
14 5 W5619D6 DAN 626 30-197 30-148 Sch C KD
*Use Master Keying Schedule form and appropriate Master Key Specification Sheet when ordering.
Price Book 7
Effective May 4, 2019 • Rev. 05/19
14
LOCKS
Prices subject to change without notice
FORMS & EXAMPLES •
May 1, 2003
To: Falcon Dealer
100 East Avenue
Dealer City, State 11111
RE: District 10, Jones Elementary School
Please consider this authorization to ship product for the above-referenced project.
Jones Elementary School is to be keyed using a new Falcon Restricted Key System. For security reasons, we would like to
have all keys for this facility shipped to a location other than the job site. Master keyed products, however, can be shipped
directly to the site. This letter authorizes Falcon to ship our restricted products to the following addresses:
Master Keyed Products, Construction Keys, Locks Less
Cylinders, and Locks with Construction Cores
Attn: Building Project Manager
District 10 Schools
555 Main Street
End User City, State 55555
Master Keys, Change Keys, Control Keys, and Key Blanks
Attn: Locksmith
District 10 Lockshop
1201 Fifth Avenue
End User City, State 55555
These two addresses above serve as our only authorized shipment addresses for all orders placed for our facility. We
understand that this letter will be kept on file and referenced for our future orders and that a new letter is only required to
add, remove, or change authorized shipping locations.
Sincerely,
End User Representative
Facilities Manager
Date - REQUIRED
Facility Name - REQUIRED
Dealer Name -
RECOMMENDED
Authorized Ship -
To Addresses -
REQUIRED
End User
Representative
Signature -
REQUIRED
Letter may be mailed or faxed to Falcon
Falcon Restricted Order Processing
3899 Hancock Expressway
Security, CO 80911
Fax: (888) 840-7735
District 10 Schools
555 Main Street
End User City, State 55555
(555) 555-5555
End User
Letterhead - REQUIRED
DISTRICT 10
Sample Letter of Authorization
For Falcon® Restricted Products
Non-Master Keyed
ORDER
MARK CARTONS: ACCOUNT NO. P.O. NO DATE
CUSTOMER NAME AND ADDRESS: SHIP TO:
Page 1 of _______ © 2013 Allegion
ADDITIONAL DETAILS
LINE OUTSIDE INSIDE Use for Key Section and Bitting
ITEM QTY PRODUCT DES FIN DES FIN HAND LATCH STRIKE EXT DIM Information, KA Groups, etc.
QUOTE# PRICE BOOK:
SHIPPING INSTRUCTIONS
REQUESTED SHIPDATE
ORDER WRITTEN BY
FOR FURTHER INFORMATION, CONTACT
Name:
Phone:
Fax.
Account No. _______ _____________ P.O. No. ______________________ Page _______ of _______ © 2013 Allegion
ADDITIONAL DETAILS
LINE
OUTSIDE INSIDE Use for Key Section and Bitting
ITEM QTY PRODUCT DES FIN DES FIN HAND LATCH STRIKE EXT DIM Information, KA Groups, etc.
FALCON
MASTER KEYED ORDER
This form must be attached to the
MASTER KEY SYSTEM SUMMARY FORM
Please provide as complete and accurate as possible
so we can provide what you need for your Key System
Excel Soft copy - Print Instructions:
To avoid printing more sheets than
needed, Select <Print>, from the print
screen select <Print range>, then select
<Pages> from ___to___& click OK.
Quote #:
Account No.: P.O. #:
Shipping Instructions:
Mark Cartons: Date:
Order Written By:
Customer Name and Address: Ship to:
For Further Information Contact:
Name:
Phone:
Fax:
Page 1 of ___
Items Ordered OUTSIDE
HAND
(Only one
hand per
line item)
INSIDE LATCH STRIKE Enter door
thickness
if not
standard
Enter
when door
thickness
is greater/
equal to 2˝
Dimension
for mortise
cylinder,
blocking
ring, etc.
ADDITIONAL DETAILS
Lock Details DESIGN FINISH DESIGN FINISH
Key/Label Instructions
QTY Heading DOOR #
KEY
Symbol(s)
MK
Symbol(s)
LINE ITEM
QTY PRODUCT DR THK EXT DIM
© 2013 Allegion
Page 2 of ___
Items Ordered OUTSIDE
HAND
(Only one
hand per
line item)
INSIDE LATCH STRIKE Enter door
thickness
if not
standard
Enter
when door
thickness
is greater/
equal to 2˝
Dimension
for mortise
cylinder,
blocking
ring, etc.
ADDITIONAL DETAILS
Lock Details DESIGN FINISH DESIGN FINISH
Key/Label Instructions
QTY Heading DOOR #
KEY
Symbol(s)
MK
Symbol(s)LINE ITEM QTY PRODUCT DR THK EXT DIM
© 2013 Allegion
1 of 5 MS-I200
MASTER KEY
SYSTEM SUMMARY
This form must be attached to the
Master Key Order form and P.O.
Please provide as complete and accurate as
possible so we can provide what you need for
your Key Syste m.
o New
o Attached Dealer Specified Combinations
Construction Keyed o Yes o No
Full Size Construction Cores o ICA o ICB o ICC
(Schlage Only)
Small Format Construction Cores o Brown o Green
Construction Keyed Type
oFalcon o CK (BOK) o Lost Ball
oSchlage o CK (Split) o RCK ( 5-Pin C only )
Type
o 5-pin o 6-pin o 7-pin
See compatibility chart on page 5
Keyway
Specified **:
Schlage
oClassic
oClassic Primus *
Everest ®
oB (Small Format IC, Restricted *)
oC (Open)
oPrimus® *
oD (Restricted *)
oPrimus® *
Everest 29™
oR (Small Format IC, Restricted *)
oS (Open)
oPrimus® *
oT (Restricted *)
oPrimus® *
Job Name
Address
City / State
Country
Account
No.
P.O.#
For detailed instructions on how to complete this form please refer to pages 4 & 5
System Overview
1. Select System
o Existing (provide info below)
Registry # __________________________________________
Structure or
Factory Order # _____________________________________
Falcon
oStandard
oSchlage C
oRestricted *
oInterchangeable Core A2
oInterchangeable Core A4
** = The Commercial Master Key Department makes the final
decision in the selection of key sections
Everest 29 key sections are backwards compatible to Everest key-
ways and have the following relationships:
R family sections > B family keyways
S family sections > C family keyways
T family sections > D family keyways
2 of 5 MS-I200
2. Select Keys & Key Stamping
3. Select Cylinder Stamping
Change Keys
No. Of Keys per Symbol
No. Of Keys per Cylinder
Type
oStandard Bow oStandard Bow oAccess Bow oLarge Bow
(Unembossed) (Schlage Only)
Key Stamp Details
oKeyset Symbol oDo Not Duplicate oWith Custom Die
(DND) (Specify)
oNon-standard Code (Specify)
Change Key Packaging and Shipping Instructions
Pack Keys Independently (PKI) of Lock or Cylinder ***
oYes oNo
If PKI, ship change keys to:
oDealer oOther
oSee Primus Facesheet
*** = Furnished standard at no charge with
Split-Key construction keying
Cylinder Stamp Details
oWith Industry Standard Key Symbol oNon-Standard Code (Specify)
Cylinder Stamping Location
oPlug Face (N/A in Primus) - VKC oConcealed (N/A in Falcon STD) - CKC
3 of 5 MS-I200
6. Operating Instructions
(Unless otherwise specified, all hierarchical master keys will operate cross-keyed cylinders)
Cross Keyed is operated by
Cylinder these change keys
X
X
X
X
Cross Keyed is operated by
Cylinder these change keys
X
X
X
X
GGM o
GM o
MK o
MK o
MK o
MK o
Others o
5. Master Key Future Expansion
List Future MK Symbols
Example:
MK………o BJ, BK 40 each
Approx. # of Change Key Symbols Under Each Future MK
3
Level Qty. Per Master Key Symbol (s) Total Quantity
GGM
GM
MK or RMK
Control
Emergency
Others
Ship Master Keys To:
oDealer oSee Primus Facesheet oOther
Special Function Qty. Per Qty. Per
RCK (Lost Ball) **** Full Size Construction Core Keys (Schlage Only)
CK (Split Key) **** Full Size Construction Core Control Keys (Schlage Only)
Extractor Tools **** Small Format Construction Core Keys
Small Format Construction Core Control Keys
4. Select Key Quantities
**** = Use with Construction Keying
4 of 5 MS-I200
7. Instructions and Compatibility
General Information
If you do not know the registry number (R#), structure number or the original factory order number for an existing system, contact Customer
Service prior to placing the order:
Tel. 1-877-671-7011
Fax 1-800-452-0663
• Only one structure may be ordered on the same purchase order
• Classic refers to Obverse, Numbered (Paracentric), Quad, and Reverse key section families
• Classic Primus refers to Primus Obverse and Primus Quad key section families
Section 1: System a System
Full Size Construction Cores
• Schlage only
Small Format Construction Cores
• 7-pin only for Schlage
• 6- and 7-pin for Falcon
CK (Split)
• 6-pin for Schlage and Falcon
• Split key construction keying is not available for Classic Primus or Everest 29 Primus
RCK (Lost Ball)
• 5-pin (C keyway) only for Schlage
• 5-, 6-, and 7-pin for Falcon
System Selection
• Refer to the compatibility chart
Section 2: Select Kys and Key Stamping
Stamp Details
• Unless otherwise specified, industry standard key symbols are stamped on Everest 29™ and Primus® keys
• For custom die, attach RFQ approval for Schlage
Section 3: Select Cylinder Stamping
Type
• For cylinder type refer to the compatibility chart
Keyway (specify)
• Schlage Commercial’s default key section for new Master Key Systems is Everest™ S145
5 of 5 MS-I200
Section 4: Key Quantities
Level
• Unless otherwise specified, the control key has the same cut as the highest-level key in the system
(Except SFIC systems)
Special Function
• Construction keys are not furnished unless specified
Change Keys
• Unless otherwise specified 2 change keys are furnished per lock or cylinder
Section 5: Master Key Future Expansion
• Do not use the letters “I”, “O”, “CK”, “KA, or “KD” for any master key symbols
Section 6: Operating Instructions
• Cross keying reduces the security and expansion of key systems
• Unless otherwise specified, all hierarchical master keys will operate cross-keyed cylinders
5 Pin 6 Pin 7 Pin Split
Key
Block
O-Key
Lost
Ball
Tempe
Core A2 A4 0.025 0.018
Schlage
Classic X X X X X
Everest 29 S X X X
Everest 29 T X X X
Everest 29 R X X X
Classic Primus (XP) X X
Everest 29 Primus (XP) X X
Falcon
Open X X X X X X
Restricted X X X X X
Schlage C X X
SFIC Open X X X X X
SFIC Restricted X X X X X
Compatibility Chart
29
MA SeriesMortiseGrade 1LOCKS
Prices subject to change without notice
Price Book 7
Effective May 4, 2019 • Rev. 05/19
MA-Series
Introduction
Finish Codes and Descriptions
Code Description
605 (US3) Bright Brass
606 (US4) Satin Brass
613 (US10B) Oil Rubbed Bronze
619 (US15) Satin Nickel
622 (US19) Matte Black
625 (US26) Bright Chrome
626 (US26D) Satin Chrome
630 (US32D) Satin Stainless Steel
643E (US11) Aged Bronze
Standard Features - Furnished unless otherwise specified
Certification ANSI A156.13, Series 1000, Grade 1 Operation and Security, UL Listed for 3-Hour fire door
with SFIC Interchangeable Core Cylinders: Grade 3 Security
Latch 2 piece stainless steel anti-friction bolt 3/4" projection.
Strike 1-1/4" x 4-7/8", ANSI, Square corner, with dust box
Cylinder 6-Pin, Solid brass, Keyed 5-Pin, Falcon G keyway, Keyed different (KD)
Door Range 1-3/4" - 1-7/8" standard
Keys Two, Nickel silver cut keys per lock, Falcon G keyway
MA Series
Function Chart 31
MA Complete Lock Pricing 33
Option
Conventional Cylinder Options ...............................................37
SFIC Cylinder Options ................................................................37
Small Format Interchangeable Core.....................................37
Small Format Constructoin Core ...........................................37
Strikes ...........................................................................................38
Armor Fronts (Scalps) .............................................................38
Lock Less Components ............................................................. 41
Non-Standard Door Thickness ............................................... 41
Abrasive Coating and Knurling ...............................................41
Lead Wrap.....................................................................................41
Allegion Connect .........................................................................41
Indicators ......................................................................................41
MA Series Parts
Full Body Mortise Deadlocks .................................................. 36
Lock Cases ...................................................................................39
Knobs & Levers ...........................................................................39
Roses .............................................................................................39
Escutcheons ................................................................................40
Screws and Screw Packs .........................................................40
Misc. Parts ....................................................................................40
Allegion Connect .........................................................................41
Indicators ......................................................................................41
Trim Packs ....................................................................................42
Product Identification
MA 501 P D
Latch Suffix
D = Deadlatch
Cylinder Suffix
B = Less SFIC
BB = With SFIC Core (Best)
BDC = Disp. Const. Core
G = With SFIC Core (Falcon)
H = With SFIC Keyed Const.
Core
L = Less 6-Pin Cylinder
P = 6-Pin Cylinder pinned
to 5 chambers
P6 = 6-Pin Cylinder pinned
to 6 chambers
P7 = 7-Pin Cylinder pinned
to 7 chambers
Function
See 31
Lock Series
SFIC = Small Format (Best® Style) Interchangeable Core
Prices subject to change without notice
30 Price Book 7
Effective May 4, 2019 • Rev. 05/19
MA Series Mortise Grade 1 LOCKS
Outside escutcheon
Outside rose
Mounting posts
Lock case
mounting screws
Mounting screws
Inside
escutcheon
Outside lever
Spindle
Spindle Inside lever
Inside rose
Inside thumbturn
Lock assembly
Strike screws
Armor screw
Armor front Mounting screws
Strike
MA Series
GRADE 1 MORTISE LOCK
31
MA SeriesMortiseGrade 1LOCKS
Prices subject to change without notice
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Functions • MA-Series
ANSI A156.13 Series 1000 Grade 1 Operation
Mortise Mortise
FALCON ANSI FALCON ANSI
MA101 F01 Passage/Closet Latchset
Latchbolt retracted by knob/lever from
either side at all times. Inside knob/
lever is always free for immediate
egress.
MA411* F30 Asylum Lock
Latch bolt operated by key from either side.
Both knobs/levers always inoperative. Auxiliary
dead latch.
MA161 F31 Connecting Room/Exit Latch
Latch bolt operated by knob/lever from
inside. No trim outside. Auxiliary dead
latch.
MA431 F34 Classroom Security Lock with Deadbolt
Latch bolt operated by knob/lever from
either side except when outside knob/lever
is locked from inside or outside by key. Dead
bolt retracted by key from inside or outside.
Operating inside knob/lever retracts both bolts
and unlocks outside. Latch bolt dead locked
when dead bolt is thrown. Inside knob/lever is
always free for immediate egress.
MA301 F02 Privacy Lock
Latch bolt operated by knobs/levers
either side, dead bolt operated by turn
from inside or by emergency release
outside.
MA441 F32 Classroom Security Lock
Latch bolt operated by knob/lever from either
side except when outside knob/lever is locked
from inside or outside by key. When outside
knob/lever is locked, latch bolt is retracted by
key from inside or outside or by operating inside
knob/lever. Auxiliary dead latch. Inside knob/
lever is always free for immediate egress.
MA311 F19 Privacy, Bedroom or Bath Lock
Latch bolt operated by knobs/levers.
Dead bolt operated by turn from
inside and emergency release outside.
Rotating inside knob/lever retracts both
bolts. Inside knob/lever is always free
for immediate egress.
MA451 F15 Hotel Guest Lock
Latch bolt operated by key from outside or by
operating inside knob/lever. Outside knob/lever
is always inoperative. Dead bolt projected by
turn from inside and all keys except emergency
key are shut out. Operating inside knob/lever
retracts both bolts. Auxiliary dead latch. Inside
knob/lever is always free for immediate egress.
MA321 F22 Privacy Lock
Latch bolt operated by knob/lever
from either side except when outside
knob/lever is locked by inside T-turn.
Operating inside knob/lever, closing
door or operating outside emergency
release unlocks outside knob/lever.
Inside knob/lever is always free for
immediate egress.
MA521 F04 Entry/Office Lock
Latch bolt operated by knob/lever from either
side except when outside knob/lever is made
inoperative by buttons in face. When outside
knob/lever is locked, latch bolt is retracted by
key from outside or by operating inside knob/
lever. Auxiliary dead latch. Inside knob/lever is
always free for immediate egress.
MA371* F14 Store Door Lock
Latch bolt operated by knobs/levers
either side. Dead bolt by key from either
side.
MA531 F20 Apartment Corridor Door Lock
Latch bolt operated by knob/lever from either
side, except when outside knob/lever is made
inoperative by buttons in face. Dead bolt
operated by key outside or turn inside. Key
outside operates both bolts. Operating inside
knob/lever retracts both bolts and outside
remains locked. Latch bolt is deadlocked when
outside knob/lever is made inoperative or
when the dead bolt is projected. When dead
bolt is retracted, knob/lever is unlocked by
buttons in face. Inside knob/lever is always free
for immediate egress.
MA381 F09 Apartment, Exit Lock
Latch bolt operated by knob/lever from
either side, except when outside knob/
lever is locked by key from inside. When
outside knob/lever is locked, latch bolt
is retracted by key from outside or by
operating inside lever. Auxiliary dead
latch. Inside knob/lever is always free
for immediate egress.
* Caution: Double cylinder locks on residences and any door, in any structure, which is used for egress are a life safety hazard in times of emergency and
their use is not recommended. Installation should be in accordance with existing codes only.
32
MA Series Mortise Grade 1 LOCKS
Prices subject to change without notice
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Mortise
FALCON ANSI
MA851-12
MA851-24
Storeroom-Fail Safe EL
Latch bolt operated by knob/lever from either
side except when outside knob/lever is electrically
locked. When outside knob/lever is locked, latch
bolt retracted by key in outside cylinder. Deadlocking
latch. Specify 12 or 24V DC. Inside knob/lever is
always free for immediate egress.
MA851-12RX
MA851-24RX
Storeroom-Fail Safe EL w/ MA851-24RX
Request to Exit (RX)
Latch bolt operated by knob/lever from either
side except when outside knob/lever is electrically
locked. When outside knob/lever is locked, latch
bolt retracted by key in outside cylinder. RX monitors
inside or outside trim independently; compatible
with normally open or normally closed systems.
Deadlocking latch. Specify 12 or 24V DC. Inside
knob/lever is always free for immediate egress.
MA881-12
MA881-24
Storeroom-Fail Secure EU
Latchbolt operated by knob/lever from inside
except when outside knob/lever is electrically
unlocked, then knob/lever from either side. When
locked, key in outside cylinder retracts latch bolt.
Specify 12 or 24V DC. Deadlocking latch. Inside
knob/lever is always free for immediate egress.
MA881-12RX
MA881-24RX
F15 Storeroom-Fail Secure EU
Latchbolt operated by knob/lever from inside
except when outside knob/lever is electrically
unlocked, then knob/lever from either side. When
locked, key in outside cylinder retracts latch bolt.
RX indepently monitors inside or outside trim;
compatible with normally open or normally closed
systems. Deadlocking latch. Specify 12 or 24V DC
Inside knob/lever is always free for immediate
egress.
MA911 F29 Classroom Dead Lock
Key from outside operates dead bolt. Turn from
inside retracts but does not project dead bolt.
MA921 F18 Outside Only Deadlock
Dead bolt by key outside only.
MA931* F16 Two-sided Deadlock
Dead bolt by key from either side.
MA941 F17 Deadlock w/ inside turn
Dead bolt by key outside or turn inside.
MA12/MA18 Dummy Trim
Single or double available.
Single (MA12)
Double (MA18)
ANSI A156.13 Series 1000 Grade 1 Operation
Mortise
FALCON ANSI
MA541* F21 Entry or Office Lock
Latchbolt retractedby knob/lever from either
side. Deadbolt thrown or retracted by key
outside or thumbturn inside.
MA551 F06 Holdback Lock
Latch bolt operated by lever from either side
except when outside lever is locked from
outside by key. Latch bolt can be locked in a
retracted position by key. When outside lever
is locked, latch bolt is retracted by key from
outside or by operating inside lever unless
latch bolt has been locked in a retracted
position.Auxiliary dead latch. Inside knob/
lever is always free for immediate egress.
Note: Chassis is handed
MA561 F05 Classroom Lock
Latchbolt operated by knob/lever from
either side except when outside knob/lever
is locked by key. When outside knob/lever
is locked, latchbolt is retracted by key from
outside or by operating inside knob/lever.
Auxiliary latch deadlocks latchbolt when door
is closed. Inside knob/lever is always free for
immediate egress.
MA571 F13 Dormitory or Exit Lock
Latch bolt operated by knob/lever from
either side. Dead bolt projected by key from
outside and turn from inside. Operating inside
knob/lever retracts both bolts and unlocks
outside. Inside knob/lever is always free for
immediate egress.
MA581 F07 Storeroom Lock
Latch bolt operated by key from outside or
by operating inside knob/lever. Outside knob/
lever is always inoperative. Auxiliary dead
latch. Inside knob/lever is always free for
immediate egress.
MA621 F08/F10 Apartment Corridor Lock
Latch bolt is operated by knob/lever from
either side, except when outside knob/lever
is made inoperative by buttons in face. Dead
bolt is operated by turn inside. Key outside
operates both bolts. Inside knob/lever is
always free for immediate egress.
MA641 Dormitory Lock
Latch bolt by knob/lever inside and key
outside. Inside knob/lever free. Outside knob/
lever rigid. Dead bolt by key outside or T-turn
inside. Rotating inside knob/lever retracts
both bolts. Deadlocking latch. Inside knob/
lever is always free for immediate egress.
MA-Series • Functions
* Caution: Double cylinder locks on residences and any door, in any structure, which is used for egress are a life safety hazard in times of emergency and their use
is not recommended. Installation should be in accordance with existing codes only. No Immediate Egress.
33
MA SeriesMortiseGrade 1LOCKS
Prices subject to change without notice
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Grade 1 Mortise Locks with Cast/Forged or Heavy Wrought
Trim ANSI-A156.13, SERIES 1000, GRADE 1 Complete Locks • MA-Series
AG (Avalon-Gala) DG (Dane-Gala) LTG (Latitude-Gala*)
QG (Quantum-Gala) SG (Sutro-Gala)
Cast Lever BOG (Boardwalk-Gala*)
BRG (Broadway-Gala*)
Note: 1) Specify 12 or 24VDC. Default is 12V.
Power supply PS902 will be sufficient to operate an individual lock for multiple lock installation - see Power Supply section.
* Latitude, Longitude, Broadway and Boardwalk levers not available in 630 finish.
** Sutro-Gala trim not available in 619, 622 or 643e finishes.
MA Lever/Rose Styles
Function Description
Designs and Finishes
AG DG QG SG** LTG* LGG* BRG* BOG*
626 643E 605 606 613 619 622 625 630
*
Single Cylinder Functions
MA521P Entry/Office
$575.00 $587.00
MA541P Entry/Office
MA551P Holdback
MA561P Classroom
MA571P Dormitory Exit
MA581P Storeroom
MA531P Apartment Corridor
592.00 604.00 MA621P Front Door
MA641P Dormitory
MA451P Hotel 747.00 759.00
MA851P-12 or -24 1 Elect. Storeroom (Fail Safe) 1,062.00 1,074.00
MA881P-12 or -24 1 Elect. Storeroom (Fail Secure)
MA851P-12RX or -24RX 1 Elect. Storeroom (Fail Safe) w/ RX 1,162.00 1,174.00
MA881P-12RX or -24RX 1 Elect. Storeroom (Fail Secure) w/ RX
Double Cylinder Functions
MA371P Store Door
$634.00 $646.00
MA381P Apartment /Exit
MA411P Asylum
MA431P Classroom Security with deadbolt
MA441P Classroom Security
CAUTION: Double cylinder locks on residences and any door in any structure which is used for egress are a life safety hazard in times of emergency and their use is
not recommended. Installation should be in accordance with existing codes only.
Non-Keyed Functions
MA101 Passage $448.00 $460.00
MA161 Exit/Connecting 466.00 478.00
MA301 Privacy
521.00 533.00 MA311 Privacy
MA321 Privacy
MA12 Half Dummy 186.00 192.00
MA18 Full Dummy 369.00 381.00
LGG (Longitude-Gala*)
34
MA Series Mortise Grade 1 LOCKS
Prices subject to change without notice
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Grade 1 Mortise Locks with Cast/Forged or Heavy
Wrought Trim ANSI-A156.13, SERIES 1000, GRADE 1
MA-Series • Complete Locks
AN (Avalon-Napa) DN (Dane-Napa)
QN (Quantum-Napa) SN (Sutro-Napa)
Cast Lever
Note: 1) Specify 12 or 24 VDC.
Power supply PS902 will be sufficient to operate an individual lock for multiple lock installation - see Power Supply section.
* Latitude, Longitude, Broadway and Boardwalk levers not available in 630 finish.
** Sutro-Gala trim not available in 619, 622 or 643e finishes.
MA Lever Escutcheon Styles
Function Description
Designs and Finishes
AN DN QN SN** LTN* LGN* BRN* BON*
626 643E 605 606 613 619 622 625 630
Single Cylinder Functions
MA521P Entry/Office
$620.00 $632.00
MA541P Entry/Office
MA551P Holdback
MA561P Classroom
MA571P Dormitory Exit
MA581P Storeroom
MA531P Apartment Corridor
629.00 641.00 MA621P Front Door
MA641P Dormitory
MA451P Hotel 686.00 698.00
MA851P-12 or -241 Elect. Storeroom (Fail Safe) 1,131.00 1,143.00
MA881P-12 or -241 Elect. Storeroom (Fail Secure)
MA851P-12RX or -24RX1 Elect. Storeroom (Fail Safe) w/ RX 1,231.00 1,243.00
MA881P-12RX or -24RX1 Elect. Storeroom (Fail Secure) w/ RX
Double Cylinder Functions
MA371P Store Door
$681.00 $693.00
MA381P Apartment/Exit
MA411P Asylum
MA431P Classroom Security with deadbolt
MA441P Classroom Security
CAUTION: Double cylinder locks on residences and any door in any structure which is used for egress are a life safety hazard in times of emergency and their use is
not recommended. Installation should be in accordance with existing codes only.
Non-Keyed Functions
MA101 Passage $486.00 $498.00
MA161 Exit/Connecting 504.00 516.00
MA301 Privacy
559.00 571.00 MA311 Privacy
MA321 Privacy
MA12 Half Dummy 200.00 206.00
MA18 Full Dummy 401.00 413.00
LTN (Latitude-Napa*)
BON (Boardwalk-Napa*)
BRN (Broadway-Napa*)
LGN (Longitude-Napa*)
35
MA SeriesMortiseGrade 1LOCKS
Prices subject to change without notice
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Complete Locks • MA-Series
HG (Hana-Gala) HN (Hana-Napa)
Note: 1) Specify 12 or 24VDC. Default is 12V.
Power supply PS902 will be sufficient to operate an individual lock for multiple lock installation - see Power Supply section.
MA Knob Styles – Hana
Function Description
Designs and Finishes
HANA – GALA HANA – NAPA
626
605 606 613
625 630 626
605 606 613
625 630
Single Cylinder Functions
MA521P Entry/Office
$509.00 $521.00 $525.00 $537.00
MA541P Entry/Office
MA551P Holdback
MA561P Classroom
MA571P Dormitory Exit
MA581P Storeroom
MA531P Apartment Corridor
525.00 537.00 533.00 545.00 MA621P Front Door
MA641P Dormitory
MA451P Hotel 580.00 592.00 592.00 604.00
MA851P-12 or -241 Elect. Storeroom (Fail Safe) 1,025.00 1,037.00 1,034.00 1,046.00
MA881P-12 or -241 Elect. Storeroom (Fail Secure)
MA851P-12RX or -24RX1 Elect. Storeroom (Fail Safe) w/ RX 1,125.00 1,137.00 1,134.00 1,146.00
MA881P-12RX or -24RX1 Elect. Storeroom (Fail Secure)w/ RX
Double Cylinder Functions
MA371P Store Door
$581.00 $593.00 $590.00 $602.00
MA381P Apartment/Exit
MA411P Asylum
MA431P Classroom Security with deadbolt
MA441P Classroom Security
CAUTION: Double cylinder locks on residences and any door in any structure which is used for egress are a life safety hazard in times of emergency and their use is
not recommended. Installation should be in accordance with existing codes only.
Non-Keyed Functions
MA101 Passage $351.00 $363.00 $366.00 $378.00
MA161 Exit/ Connecting 375.00 387.00 388.00 400.00
MA301 Privacy
441.00 453.00 460.00 472.00 MA311 Privacy
MA321 Privacy
MA12 Half Dummy 144.00 150.00 142.00 148.00
MA18 Full Dummy 272.00 284.00 284.00 296.00
36
MA Series Mortise Grade 1 LOCKS
Prices subject to change without notice
Price Book 7
Effective May 4, 2019 • Rev. 05/19
MA-Series • Deadlocks and Cylinders
** Hotel mortise cylinder are only offered as Master keyed or 6-pin 0-bitted and must be specified. If not specified, 0-bitted
furnished.
Notes: 1) Cylinders are furnished 5-pin G keyway, keyed differently unless otherwise specified.
2) Restricted sections see page 141. See Keys & Keying for standard keyways. Contact 877-671-7011 for availability.
3) MA cam (5622-STD) provided unless otherwise specified.
4) For 7-pin conventional add $11.50.
5) All mortise cylinders will be furnished with cam 5622-STD, except for MA381 function which will be supplied with 5620-STD and 5621-STD. See page 152 for
additional available cams.
6) Mortise and rim cylinders are not available in any competitor keyway, except Schlage C.
7) 984D, 985D not available in 629 and 630.
8) Conventional mortise cylinder with Schlage C keyway are available with the following cams only, 5622-STD & B502-191. Specify XQ11-949 when ordering with
cylinder dogging
9) Add $10.80 (list) for Falcon restricted keyways. See page 8 for standard keyways. All others are restricted. Falcon conventional cylinder restricted keyways use a
unique pin kit (P/N 1417) and cutter wheel for keys.
Notes: 1) All mortise cylinders will be furnished with cam 5622-IC, except for MA381 function which will be supplied
with 5620-IC and 5621-IC. See page 154 for additional available cams.
2) C977 is only furnished with 012667-001 Adams Rite Cam.
Conventional Mortise Cylinders
Pins Length Description Number 626 605 606 613 619
622 625 630 643e
5 or 6 1-1/8 Mortise 985 $61.00 $63.00
1-1/4 986
5, 6, or 7
1-3/8
Mortise
987 61.00 63.00
1-1/2 988 78.00 80.00
1-3/4 990 100.00 102.00
2992 105.00 107.00
61-1/8
Mortise, hotel function**
250
80.00 82.00
1-1/4 251
6 1-3/8 252
7 1-3/8 253
- 1-1/8 Mortise, thumbturn 985T 95.00 97.00
1-1/4 986T
- 1 Dummy 984D 37.00 39.00
1-1/8 985D
SFIC MA Series housings only
Cat. Number Length Pins Description 626, 643E 605 606 613, 619
622 625 630
C987-xx 1 3/8" 6 or 7 Mortise $38.00 $40.00
C988-xx 1 1/2" 6 or 7 Mortise
C990-xx 1 3/4" 6 or 7 Mortise 49.00 51.00
C992-xx 2" 6 or 7 Mortise 51.00 53.00
C997-xx 1 3/8" 6 or 7 Mortise, unassembled, less cam 24.00 26.00
C262-xx 1 5/8" 6 or 7 Mortise, hotel function RH 68.00 70.00
C265-xx 1 5/8" 6 or 7 Mortise, hotel function LH
Notes: 1) If ordered with Napa Escutcheon Trim - add $132 (both sides will be included)
2) Deadlock case comes with appropriate scalp (front).
MA Series Mortise Deadlocks (No Knob or Lever Trim)
Function Description
List Price
626, 643E
605 606 613 619
622 625 630
MA911P Classroom Deadlock $350.00 $356.00
MA921P Deadlock by key outside 315.00 321.00
MA931P** Deadlock by key from either side, Double Cylinder lock 343.00 349.00
MA941P Single Cylinder, Thumbturn inside 430.00 436.00
**CAUTION: Double cylinder locks on residences and any door in any structure which is used for egress are a life safety hazard in
times of emergency and their use is not recommended. Installation should be in accordance with existing codes only.
37
Price Book 7
Effective May 4, 2019 • Rev. 05/19
MA SeriesMortiseGrade 1LOCKS
Prices subject to change without notice
Cylinder Options • MA-Series
* Competitor keyways are furnished 0 bitted, unless otherwise specified. Not available Master keyed, except Schlage C
Notes: 1) Finishes: 606, 622, & 626 only
2) Specify keyway
3) Cylinders are furnished G keyway, keyed differently unless otherwise specified.
4) Restricted sections add $10.80 to list price. See page 8 for list of standard keyways.
All other keyways are considered restricted. Contact 877-671-7011 for availability.
5) 622 Finish is available only on Allegion cylinders (P, P6, & P7) in C & G Keyways.
* Keying must be specified
** Locks are assessed one non-refundable handling charge (50-231F) per core.
Note: 6) Control keys are not furnished with locks and must be ordered separately. See page 151 for details.
7) 622 Finish is available only on SFIC (G) in C & G Keyways.
Conventional Cylinder options
Description Specify Add to Lock Price
5 pinned cylinder P Suffix
Example: MA581P STD
6 pinned cylinder P6 Suffix
Example: MA581P6 N/C
7 pinned cylinder P7 Suffix
Example: MA581P7 $11.50
6 pinned Competitor keyway cylinders* P6 Suffix
Example: MA581P6 (0 Bitted, KD, KA4 only) N/C
Small Format Interchangeable Core and Small Format Construction Core
Description Specify Add to Lock Price
(per core)
Small format core * G Suffix
Example: MA581GD $45.00
Small format core (Best Style) * BB Suffix
Example: MA581BB
Small format construction core ** H Suffix
Example: MA581HD 45.00
Less Small format core B Suffix
Example: MA581BD N/C
Small format disposable core BDC Suffix
Example: MA581BDC N/C
38
MA Series Mortise Grade 1 LOCKS
Prices subject to change without notice
Price Book 7
Effective May 4, 2019 • Rev. 05/19
MA-Series • Strikes and Armor Fronts
MA-Series Strikes with Locks
Descriptions Lip Length Specify
Add to Lock Price
605, 606, 613, 619
622, 629, 630, 643E
Standard - 1-3/4" Door Thickness 1-1/4" A8737-1
N/C
Optional - 2" Door Thickness 1-7/16" A8737-2
Optional - 2-1/4" Door Thickness 1-9/16" A8737-3
Optional - 2-1/2" Door Thickness 1-11/16" A8737-4
Optional - 1-3/4" Door Thickness 7/8" A8737-5
MA-Series Strikes Sold Separately
Descriptions Lip Length Specify
Price
605, 606, 613, 619
622, 629, 630, 643E
Standard - 1-3/4" Door Thickness 1-1/4" A8737-1 $22.70
Optional - 2" Door Thickness 1-7/16" A8737-2
28.90
Optional - 2-1/4" Door Thickness 1-9/16" A8737-3
Optional - 2-1/2" Door Thickness 1-11/16" A8737-4
Optional - 1-3/4" Door Thickness 7/8" A8737-5
MA-Series Armor Fronts (Scalps) Sold Separately
Descriptions Part Number
Price
605, 606, 613, 619
622, 629, 630, 643E
MA101, 321 S77801-LL
$41.90
MA521 S77804-LL
MA161, 381, 411, 441, 561, 581, 851, 881, 551 S77805-LL
MA621 S77811-LL
MA451, 641 S77815-LL
MA911, 921, 931, 941 S77816-LL
MA301, 311, 371, 541, 571, 431 S77819-LL
MA531 S77820-LL
Notes: 1) Armor front is included in complete MA lock
2) Screws not provided with armors or strikes when ordered separately.
Please order S76300 if additional screws are required.
39
MA SeriesMortiseGrade 1LOCKS
Prices subject to change without notice
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Cases and Trim • MA-Series
MA-Series Lock Case
Part Number Description List Price
A7801-xx MA101 $224.00
A7831-xx MA161 213.00
A7802-xx MA301 250.00A7819-xx MA311
A7822-xx MA321
A7814-xx MA371 279.00A7809-xx MA381
A7830-xx MA411
A7815-xx MA451 316.00
A7804-xx MA521 279.00
A7820-xx MA531 369.00
A7821-xx MA541
279.00
A7805-xx MA561, 441
A7813-xx MA571, 431
A7807-xx MA581
A7808-xx MA621
A7815-xx MA641 316.00
A7806-xx MA551 382.00
A7851-12-xx MA851 12V
664.00
A7851-24-xx MA851 24V
A7881-12-xx MA881 12V
A7881-24-xx MA881 24V
A7851-12RX-xx MA851 12V RX
787.00
A7851-24RX-xx MA851 24V RX
A7881-12RX-xx MA881 12V RX
A7881-24RX-xx MA881 24V RX
A7829-xx MA911 202.00
A7816-xx MA921, 931, 941
Notes: 1) xx Specify handing: RH= Right hand. LH= Left hand. RR = Right hand reverse. LR = Left hand reverse.
2) Does not include armor front
MA-Series Lever & Knob Assemblies
Part Number Description
List Price
626 643E*
605 606 613 619*
622* 625 630
AS76029-L/RH Avalon, sectional trim
$123.00 $126.00
AS76140-L/RH Quantum, sectional trim
AS76526-L/RH Sutro, sectional trim
AS76280-L/RH Dane, sectional trim
AS76100-L/RH Hana, sectional trim
AS76321-L/RH Broadway, sectional trim (Not available in 630 finish)
AS76310-L/RH Boardwalk, sectional trim (Not available in 630 finish)
AS76360-L/RH Latitude, sectional trim (Not available in 630 finish)
AS76760-L/RH Longitude, sectional trim (Not available in 630 finish)
AS77321-L/RH Broadway, escutcheon trim (Not available in 630 finish)
AS77310-L/RH Boardwalk, escutcheon trim (Not available in 630 finish)
AS77360-L/RH Latitude, escutcheon trim (Not available in 630 finish)
AS77760-L/RH Longitude, escutcheon trim (Not available in 630 finish)
AE77029-L/RH Avalon, escutcheon trim
AE77140-L/RH Quantum, escutcheon trim
AE77526-L/RH Sutro, escutcheon trim
AE77280-L/RH Dane, escutcheon trim
AE77100-L/RH Hana, escutcheon trim
Notes: 3) Specify finish and handing
4) Lever assemblies include one lever assemblies with spring cage.
* Not available on Hana knobs.
MA-Series Rose
Part Number Description
List Price
626 643E
605 606 613 619
622 625 630
S76012 Rose, Gala $31.60 $34.60
AS76853 Emergency Coin Turn Rose Turn for MA 301/311/321 32.00 35.00
AS75319 Thumbturn assembly for sectional trim for MA 301/311/321 when door thickness is
less than 2" 43.10 46.10
AS76319 Thumbturn Assembly for sectional trim for all functions except MA 301/311/321
when door thickness is less than 2"
Notes: 5) Specify finish
MA-Series ROSE with INDICATOR
Part Number Description
List Price
626 630
AE55012-OT Outside indicator, sectional trim, MA301/311/321. $32.00 $35.00
AE55012-OC Outside Indicator, sectional trim, All functions except MA 301/311/321/441.
Notes: 6) Specify finish
40
MA Series Mortise Grade 1 LOCKS
Prices subject to change without notice
Price Book 7
Effective May 4, 2019 • Rev. 05/19
MA-Series • Trim, Screws and Parts
MA-Series Screw Packs
Part Number Description
List Price
606 613 622 630
S76300 1-3/4" - 1-7/8" door thickness, sectional trim with levers
$24.40
S76301 Over 1-7/8" - 2-1/2" door thickness, sectional trim with levers
E77301 Over 1-7/8" - 2-1/2" door thickness, escutcheon trim with levers
E77303 Over 1-7/8" - 2-1/2" door thickness, escutcheon trim with knobs
S76306 Torx screw pack, sectional trim, no turn
S76307 Torx screw pack, sectional trim, with turn
E77306 Torx screw pack, escutcheon trim, standard
E77307 Torx screw pack, escutcheon trim, over 1-7/8" – 2-1/2" door thickness
S76302 1-3/4" - 1-7/8" door thickness, sectional trim with knobs
S76303 Over 1-7/8" - 2-1/2" door thickness, sectional trim with knobs
E77300 1-3/4" - 1-7/8" door thickness, escutcheon trim with levers
E77302 1-3/4" - 1-7/8" door thickness, escutcheon trim with knobs
Notes: 3) Specify finish
4) Non torx screw packs contains armor front screws, strike screws, trim screws, mortise screws, spindle, mounting posts
5) Torx screw packs contain armor front, strike and trim screws only
MA/M-Series Miscellaneous Parts
Part Number Description List Price
PE1396 Dust Box, standard with lock $5.20
005099-000 Metal Dust Box 10.10
S76806 Spindles (2) for lever on standard door thickness or knob on
door thickness 1-7/8" - 2-1/2" 6.60
S76816 Spindles (2) for lever on door thickness 1-7/8" - 2-1/2" 6.60
S76206 Spindles (2) for knob on standard door thickness 6.60
S76802 Spindles (2) for connecting door, MA161 6.60
AS5813 Mounting plate for use with no outside trim 17.50
030057-002 Replacement M lock lever return spring* 9.40
Note 6): *Return spring is for the old Falcon M mortise lock not the current Falcon MA mortise lock.
MA-Series Escutcheons
Part Number Description
List Price
626 643E
605 606 613 619
622 625 630
AE77012-OP Napa, Outside lever opening
$74.90 $77.90
AE77012-OC Napa, Outside Cylinder and lever openings
AE77012-OK Napa, Outside Cylinder only opening
AE77012-OT Napa, Outside Emergency key and lever opening
E77012-IP Napa, Inside lever opening
E77012-IB Napa, inside Blank, no lever opening
AE77012-IT Napa, Inside lever opening with thumbturn attached 87.30 90.30
AE77012-IE Napa, Inside no lever opening with thumbturn attached
E77012-IC Napa, Inside Cylinder and lever opening 74.90 77.90
E77012-IK Napa, Inside Cylinder only opening
Note: 1) Specify finish
MA-Series ESCUTCHEONS with INDICATOR
Part Number Description
List Price
626 630
AE87012-0T Napa, outside indicator escutcheon trim, MA301/311/321. Vacant/Occupied.
$111.00 $114.00
AE87012-0K Napa, outside indicator escutcheon trim, MA911/921/931/941. Vacant/Occupied.
AE87012-0C Napa, outside indicator escutcheon trim, all other functions. Vacant/Occupied.
AE87012-IC Napa, inside indicator escutcheon trim, MA441. Vacant/Occupied.
AE87112-0T Napa, outside indicator escutcheon trim, MA301/311/321. Locked/Unlocked.
AE87112-0K Napa, outside indicator escutcheon trim, MA911/921/931/941. Locked/Unlocked.
AE87112-0C Napa, outside indicator escutcheon trim, all other functions. Locked/Unlocked.
AE87212-IC Napa, inside indicator escutcheon trim, MA441. Locked/Unlocked.
Note: 2) Specify finish
41
MA SeriesMortiseGrade 1LOCKS
Prices subject to change without notice
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Options • MA-Series
Notes: 1) MA-series locks ordered less all components will be furnished as lock cases. See page 39 for part numbers.
2) Sum of applicable deducts, use DG (Dane Gala) and specified finish for base price.
Notes: 3) Must indicate how lock will be extended: Extended Inside (EI) on non-thumb turn functions only
Extended Outside (EO) on all functions
Extended Equally (EE) on all functions
4) MA451 has maximum 1-3/4” door thickness
Note: 8) Optional Vacant available on the following functions: MA301, MA311, MA321, MA371, MA431, MA451, MA541, MA571, MA641, MA921, MA931, MA941 on the
outside of door.
Optional Vacant available on the following functions: MA441 on the inside of door.
Available in 626 (Satin Chrome) or 630 (Satin Stainless) finish only.
LOCKED/UNLOCKED message indicator only available on the following functions: MA441 on the inside of the door.
Locks Less Components
Description Specify Deduct from Lock Price
Less each knob or lever LLL for knob/lever design
Example: MA581P LLL/DG x DG $27.40
Less each escutcheon LLL for escutcheon design
Example: MA581P DN x DN/LLL 27.70
Less each rose LLL for rose design
Example: MA581P DG x DG/LLL 7.10
Less standard cylinder L suffix
Example: MA581L DG 61.00
Less standard hotel cylinder L suffix
Example: MA451L DG 61.00
Less armor front LLL for latch
Example: MA581P DG 626 LLL 21315R 23.50
Less strike LLL for strike
Example: MA581P DG 626 20099 LLL 12.20
Non-Standard Door Thickness
Description Specify Add to Lock Price
Over 1 7/8" – 2 1/2" thick doors Door thickness and how door is extended
Example: 2", EE $85.30
Abrasive
Description Specify Add to Lock Price
6 Prefix Example: 6 DG for Dane Gala*
* G Prefix not available in 613 $59.10
Knurling
Description Specify Add to Lock Price
8 Prefix Example: 8 DG for Dane Gala**
**Only available in 626 finish and levers only $88.30
Lead Wrap
Description Specify Add to Lock Price
9 Prefix Example: 9 DG for Dane Gala $190.00
Allegion Connect
Suffix List Add
CON Cross-category solution using common interconnect components for electrified options.
Available on the MA851 and MA881 functions including all voltage (12 or 24) and RX options.
For wire harness options refer to Electronic Power Supplies section.
N/C
Indicators
Description Specify Add to Lock Price
OCCUPIED/VACANT message indicator.
For Sectional and Escutcheon Trim
Add M Suffix to trim.
Example: DGM for Dane Gala $96.60
LOCKED/UNLOCKED message indicator.
For Sectional and Escutcheon Trim
Add SI Suffix to trim.
Example: DGSI for Dane Gala 96.60
Note: 5) Abrasive option not available on Latitude, Longitude, Broadway, & Boardwark levers.
Note: 6) Knurling option not available on Latitude, Longitude, Broadway, & Boardwark levers.
Note: 7) Lead Wrap option not available on Latitude, Longitude, Broadway, & Boardwark levers.
42
MA Series Mortise Grade 1 LOCKS
Prices subject to change without notice
Price Book 7
Effective May 4, 2019 • Rev. 05/19
MA-Series • Trim Packages
Notes:
S = Sectional, No Thumbturn, up to 2 cylinders
C = Sectional, Thumbturn, no cylinder
T = Sectional, Thumbturn & cylinder
E = Escutcheon Trim
1) Specify Lever/Knob style and finish
2) Contains inside and outside trim, screw pack with mounting hardware
* Not available on Hana Knob Trim Packages.
**Latitude, Longitude, Broadway and Boardwalk levers not available in 630 finish.
MA-Series Trim Packages
List Price
Cat. Number Function Specify Style 626
643E*
605 606 613
619* 622*
625 630**
TP 50 S 101, 371, 381, 411, 431, 441, 521, 551, 561, 581, 851, 881 Dane, Sutro, Avalon, Quantum, Hana, Latitude,
Longitude, Broadway, Boardwalk $316.00 $322.00
TP 60 C 301, 311, 321 Dane, Sutro, Avalon, Quantum, Hana, Latitude,
Longitude, Broadway, Boardwalk 344.00 350.00
TP 70 T 451, 531, 541, 571, 621, 641 Dane, Sutro, Avalon, Quantum, Hana, Latitude,
Longitude, Broadway, Boardwalk 368.00 374.00
TP 55 E 101 Dane, Sutro, Avalon, Quantum, Hana, Latitude,
Longitude, Broadway, Boardwalk 381.00 387.00
TP 65 E 311, 321, 301 Dane, Sutro, Avalon, Quantum, Hana, Latitude,
Longitude, Broadway, Boardwalk
399.00 405.00
TP 75 E 431, 441, 411, 371, 381 Dane, Sutro, Avalon, Quantum, Hana, Latitude,
Longitude, Broadway, Boardwalk
TP 85 E 551, 881, 851, 581, 561, 521 Dane, Sutro, Avalon, Quantum, Hana, Latitude,
Longitude, Broadway, Boardwalk
TP 95 E 641, 541, 531, 571, 621, 451 Dane, Sutro, Avalon, Quantum, Hana, Latitude,
Longitude, Broadway, Boardwalk
43
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Prices subject to change without notice
RU-Series
Introduction
Finish Codes and Descriptions
Code Description
613 (US10B) Oil Rubbed Bronze
626 (US26D) Satin Chrome
Standard Features - Furnished unless otherwise specified
Certification ANSI A156.2, Series 2000, Grade 1, UL Listed for 3-Hour fire door
Latch 1-1/8" x 2-1/4", Square corner faceplate, 1" housing diameter, 1/2" throw, 2-3/4" backset
Strike 1-1/4" x 4-7/8", ANSI, Square corner, with dust box
Cylinder 6-Pin, Solid brass, Keyed 5-Pin, Falcon G keyway, Keyed different (KD)
Door Range 1-3/4" - 2-1/8" standard
Keys Two, Nickel silver cut keys per lock, Falcon G keyway
RU SeriesPreassembledGrade 1LOCKS
Product Identification
RU 501 P D
Latch Suffix
D = Deadlatch
S = Springlatch
Cylinder Suffix
B = Less SFIC
BB = With SFIC Core (Best)
BDC = Disp. Const. Core
G = With SFIC Core (Falcon)
H = With SFIC Keyed Const.
Core
J = Full Size IC
(Specify Manufacturer)
L = Less 6-Pin Cylinder
P = 6-Pin Cylinder pinned
to 5 chambers
P6 = 6-Pin Cylinder pinned
to 6 chambers
P7 = 7-Pin Cylinder
to 7 chambers
CP6 = 6-Pin Cylinder
Schlage C
Function
See 45
Lock Series
SFIC = Small Format (Best® Style) Interchangeable Core
Options
Latches ......................................................................................... 47
Strikes ........................................................................................... 47
Cylinder Requirements .............................................................49
Competitor Cylinders ................................................................50
Parts
Complete Cylinders ....................................................................51
Conventional Cylinder Options ...............................................51
Lock Less Components ............................................................ 52
Tactile Warning ..........................................................................52
Lead Lining .................................................................................. 52
Levers ............................................................................................ 53
Roses ............................................................................................. 53
Misc. Parts .................................................................................... 54
Screws ........................................................................................... 54
Tailpieces ......................................................................................55
Table of Contents
Function Chart 45
Complete Lock Pricing 46
Order Detail 48
Prices subject to change without notice
44 Price Book 7
Effective May 4, 2019 • Rev. 05/19
Mounting screws
Inside lever
Inside rose
Inner mounting plate
Flange nut
Inside spring cage
Mounting plate screws
Outside lever/chassis
RU Series
GRADE 1 PREASSEMBLED LOCK
RU Series Preassembled Grade 1 LOCKS
45
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Prices subject to change without notice
Functions • RU-Series
Retrofit Locks
FALCON ANSI
RU521 F40 Office Lock
Turn button locking. Turning button locks outside
lever requiring use of key until button is manually
unlocked. Inside lever always free. Deadlocking latch
bolt.
RU561 F42 Classroom Lock
Deadlocking latch bolt by levers. Outside lever is
locked by key in outside lever. Inside lever is always
free.
RU571 F48 Dormitory/Corridor Lock
Deadlocking latch bolt by levers except when locked
by push button in inside lever. Key in outside lever
locks or unlocks lever and releases button. Closing
door releases push button. Inside lever always free.
RU581 F44 Storeroom Lock
Deadlocking latch bolt by lever inside or key outside.
Outside lever is inoperable. Inside lever always free.
RU851 Storeroom (Electrified-Fail Safe)
Latch bolt operated by lever from either side except
when outer lever is electrically locked. When outer
lever is locked (inoperable), latch bolt retracted
by key in cylinder outside. 24 volt DC .185 Amps,
continuous duty.
RU881 Storeroom (Electrified-Fail Secure)
Deadlocking latch bolt operated by lever inside at
all times. Outside lever inoperable until electrically
unlocked, then latch bolt from either side. When
outside lever is inoperable, latch bolt retracted by
key in cylinder outside.
24 volt DC .185 Amps, continuous duty.
ANSI A156.2, Series 2000 Grade 1
Retrofit Locks
FALCON ANSI
RU101 F36 Passage/Closet Latchset
Latch bolt by levers at all times.
RU301 F37 Privacy/Bedroom/Bath Lock
Latch bolt by levers. Outside lever locked by
push button in inside lever. Rotating inside
lever or closing door releases push button.
Emergency release in outside lever unlocks
door.
RU381 F45 Classroom Security Lock
Latchbolt operated by lever from either
side except when key from inside lever locks
outside lever. When outside lever is locked,
latchbolt retracted by key in outside lever or
by turning inside lever.
RU411 Asylum Lock*
Deadlocking latch bolt by key from either side
at all times. Both levers inoperable.
RU501 F41 Entry Lock
Push button locking. Button on inside locks
outside lever until unlocked by key or by
rotating inside lever.
Inside lever always free.
Deadlocking latch bolt.
RU511 F40/F41 Entry/Office Lock
Turn/push button locking. Pushing and
turning button locks outside lever requiring
use of key until button is manually unlocked.
Push button locking. Pushing button locks
outside lever until unlocked by key or by
rotating inside lever. Inside lever always free.
Deadlocking latch bolt.
* Caution: Double cylinder locks on residences and any door, in any structure, which is used for egress are a life safety hazard in times of emergency and their use
is not recommended. Installation should be in accordance with existing codes only.
RU SeriesPreassembledGrade 1LOCKS
46 Price Book 7
Effective May 4, 2019 • Rev. 05/19
Prices subject to change without notice
Grade 1 Heavy Duty Unit Lock Retrofit
Key-In-Lever Lockset ANSI- A156.2, GRADE 1
RU-Series • Complete Locks
D (Dane)
Q (Quantum)
Key-In-Lever
Function Description
Designs and Finishes
D Q D
626 613
Single Cylinder Functions
RU501PD Entry
$810.00 $822.00
RU511PD Entry/Office
RU521PD Entry/Office
RU561PD Classroom
RU571PD Dormitory/Corridor
RU581PD Storeroom
Single Cylinder Functions - Electrified
RU8511PD Elec. Storeroom – Fail Safe 1,225.00 1,237.00
RU8811PD Elec. Storeroom – Fail Secure
Double Cylinder Functions
RU381PD Classroom Security 894.00 906.00
RU411PD Asylum
CAUTION: Double cylinder locks on residences and any door in any structure which is used for egress are a life safety hazard in times of emergency
and their use is not recommended. Installation should be in accordance with existing codes only.
Non-Keyed Functions
RU101S Passage $673.00 $685.00
RU301S Privacy 753.00 765.00
RU Series Preassembled Grade 1 LOCKS
47
Prices subject to change without notice
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Latches, Strikes • RU-Series
Latches with Locks
Latch Description
Door Thickness
Add to Lock Price
1-3/4" 2" 2-1/4"
314691 2-3/4" Latch height 1-3/4" x 1/2 Proj. Std. Default N/C
314692 2-3/4" Latch height 2-1/16" x 1/2 Proj. lN/C
314693 2-3/4" Latch height 2-5/8" x 1/2 Proj. lN/C
314694 2-3/4" Latch height 2-11/16" x 1/2 Proj. lN/C
315491 2-3/4" Latch height 1-3/4" x 3/4 Proj. l$159.00
315492 2-3/4" Latch height 2-1/16" x 3/4 Proj. l159.00
315493 2-3/4" Latch height 2-5/8" x 3/4 Proj. l159.00
315494 2-3/4" Latch height 2-11/16" x 3/4 Proj. l159.00
316231 2-3/4" Latch height 1-3/4" x 1/2 Proj. Default N/C
316232 2-3/4" Latch height 2 1/16" x 1/2 Proj. lN/C
316233 2-3/4" Latch height 2 5/8" x 1/2 Proj. lN/C
316234 2-3/4" Latch height 2 11/16" x 1/2 Proj. lN/C
316241 2-3/4" Latch height 1-3/4" x 1/2 Proj. Default N/C
316242 2-3/4" Latch height 2 1/16" x 1/2 Proj. lN/C
316243 2-3/4" Latch height 2 5/8" x 1/2 Proj. lN/C
316244 2-3/4" Latch height 2 11/16" x 1/2 Proj. lN/C
LLL LLL : Less Latch l-66.40
Strikes with Locks
Description Specify Add to Lock Price
ANSI, 1-1/4" x 4-7/8" standard 5164
N/CEarly Corbin Russwin single door 31471
Early Corbin Russwin single door 31471S
Early Corbin Russwin pair doors 31472
$95.20
Yale Mono Pair of Doors 31473
Early Corbin 31474
Early Russwin Unit Lock 31477
ANSI Dust Box 1” deep steel 005099-000 30 N/C
3/4 deep for 3-1/4" high strike, dust box 031453-000 30 2.30
Strikes sold separate
Finishes: 613, 626, 630
Description Lip Length Specify List Price
ANSI, 1-1/4" x 4-7/8" standard
1-3/16"
005164-000 $13.80
Early Corbin Russwin single door
(center line same as early Corbin Russwin)
031471-000 16.60
Early Corbin Russwin single door
(center line is different than early Corbin Russwin)
031471-001
Early Corbin Russwin pair doors 031472-000
89.10
Yale Mono Pair of Doors 031473-000
Early Corbin 031474-000
Early Russwin Unit Lock 031477-000
ANSI Dust Box 1” deep steel 005099-000 30 3.20
3/4 deep for 3-1/4" high strike, dust box - 031453-000 30 2.20
Latches sold separate
Finishes: 613, 626
Backset Description Spring Latch Dead Latch List Price
2-3/4"
Latch height 1-3/4" x 1/2 Proj. A31469-001 A31469-01D $101.00
Latch height 2-1/16" x 1/2 Proj. A31469-002 A31469-02D 133.00
Latch height 2-5/8" x 1/2 Proj. A31469-003 A31469-03D 139.00
Latch height 2-11/16" x 1/2 Proj. A31469-004 A31469-04D
Latch height 1-3/4" x 3/4 Proj. - A31549-01D
199.00
Latch height 2-1/16" x 3/4 Proj. - A31549-02D
Latch height 2-5/8" x 3/4 Proj. - A31549-03D
Latch height 2-11/16" x 3/4 Proj. - A31549-04D
RU SeriesPreassembledGrade 1LOCKS
48 Price Book 7
Effective May 4, 2019 • Rev. 05/19
Prices subject to change without notice
RU-Series • Order Detail
When evaluating the retrofit requirements for an RU Series lockset, the following ques tions need to be answered.
o Which manufacturer’s unit lock is currently installed?
oRusswin oCorbin oCorbin Russwin oYale oFalcon
o What is the existing latch height? To determine latch height measure existing latch height as shown here:
Latch heights currently identified and the manufacturer:
1. 1 3/4" Most Corbin & Russwin sold 1949 thru current; Yale 6200
2. 2 1/16" Corbin, Falcon
3. 2 5/8" Certain Corbin (0)2400 Series sold 1913-1953
4. 2 11/16" Russwin 2100 & 2800 Series sold 1904-1968
o What is the existing strike condition?
o What is the existing door thickness?
Locks are for 1 3/4" thick doors only.
0005164-000 031477-000
Early Russwin
Unit Lock
031474-000
Early Corbin
031471-000
Note: Strike, Door and Lock
Same Center Line Early
Corbin Russwin Single Door
031471-001
Note: Strike Center Line is not the
Same as Door and Lock Early
Corbin Russwin Single Door
031472-000
Early Corbin Russwin
Pair of Doors
031473-000
Yale Mono
Pair of Doors
DOOR LATCH
CUT OUT HEIGHT
1-1/4"
3-3/8"
4-1/8"
4-7/8"
1-5/6"
1-15/6"
2-5/8"
1-3/8"
1-15/16"
4-13/16 "
4 "
1-1/8"
9/16"
3-
11/32"
1-1/2"
2-1/8"
5/8"
4-5/32 "
1-1/4"
1- 3/4"
1-1/8" 9/16"
1-9/16"
2-
1/4"
2-1/8"
2-5/8"
3-
1/4"
2-
1/4"
1-1/8"
9/16"
1-9/16"
2-1/8"
2
-5/8"
3-1/4"
1- 7/8"
1-1/8"
2-
1/4"
2-5/8"
3-1/4 "
1- 3/8" 11/16"
1- 7/8"
1-1/8"
2-
1/4"
2-5/8"
3-1/4 "
1- 3/8" 11/16"
Ordering Format
Qty. Catalog
Number
Trim
Design
Finish Latch
Height
Strike
Part No.
Hand Cylinder Other
Requirements
8 RU521 D 626 13/4"031471-000 RH Less IC-CR Cylinder
RU Series Preassembled Grade 1 LOCKS
49
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Prices subject to change without notice
Order Detail Cont. • RU-Series
Specify cylinder requirements.
Note: Locks furnished with Falcon’s standard “G” keyway cylinder or prepared for Falcon interchangeable core unless otherwise specified.
With Cylinder
Falcon IC
o6-pin
o 7-pin
Falcon Standard
o 6-pin
specify keyway
o 7-pin
specify keyway
Competitors’ Keyways -
6-pin Standard Cylinder*
o Corbin - 60, 0 Bitted, KD
o Russwin - D1, 0 Bitted, KD
o Sargent - LA, 0 Bitted, KD (Also accepts LB, LC keys)
o Schlage - C, 0 Bitted, KD, KA4
o Schlage - E, 0 Bitted
o Yale - 8 (Para), 0 Bitted, KD
Less Cylinder - Prepared to Accept**
oFalcon IC
Falcon Standard
o 6-pin
o 7-pin
Unit / Mono Lock Cylinders
o Falcon Standard (R Series old small plug) 6-pin
o Corbin Russwin Unit Lock
(2000-052) - Master Ring not available
o Medeco Unit Lock Retrofit Cylinder
(20W5005) - Corbin Russwin Unit Lock
o Medeco Unit Lock Retrofit Cylinder
(20W0500) - Yale 6200 Mono Lock
o Yale Mono Lock (1801) and later models
Competitors’ Standard Cylinders
o Assa (65611 or 65661) 6-pin
o Corbin Russwin (2000-034 / CL3400) 6-pin-
Master Ring not available
o Medeco (20W200V3) 6-pin
- tailpiece supplied by Medeco
- Falcon / Schlage style
o Peaks (Kaba) 6-pin
o Primus (Schlage) 6-pin
o Sargent (6, 7 & 10 Line) 6-pin - Keso not available
o Schlage 6-pin
o Yale (1801) 6-pin - Bicentric not available
Competitors’ IC
o Arrow 6, 7-pin
o Assa (70600IC & V70600IC) 6-pin
o Best 6, 7-pin
o Corbin Russwin (8000) 6-pin
o Corbin Russwin (8000-7) 7-pin
o InstaKey
o Medeco 31 Series 6-pin
o Medeco 32 Series 6-pin
o Medeco Keymark 6, 7-pin
o Peaks (Kaba) 6, 7-pin
o Primus (Schlage) 6-pin
o Sargent (6300) 6-pin
o Schlage 6-pin
o Yale (1210) 6-pin
* Generic replacement cylinders with competitors’ keyways. ** Proper tailpiece supplied unless otherwise noted.
RU SeriesPreassembledGrade 1LOCKS
50 Price Book 7
Effective May 4, 2019 • Rev. 05/19
Prices subject to change without notice
RU-Series • Competitors’ I-Cores & Competitors’ Standard Cylinder
Compatibility with Competitors’ I-Cores
Compatibility with Competitors’ Standard Cylinders
The RU Series is furnished with Falcon’s standard “G” keyway cylinder unless otherwise specified.
The RU Series accepts the following competitors’ standard 6-pin cylinders.
o Assa (65611 or 65661) 6-pin
o Corbin Russwin (2000-034 / CL3400) 6-pin -
Master Ring not available
o Medeco (20W200V3) 6-pin
- tailpiece supplied by Medeco
- Falcon / Schlage style
o Peaks (Kaba) 6-pin
o Primus (Schlage) 6-pin
o Sargent (6, 7 & 10 Line) 6-pin - Keso not available
o Schlage 6-pin
o Yale (1801) 6-pin - Bicentric not available
Falcon’s standard interchangeable core option. Specify 6 or 7-pin.
Locksets with this option also accept Schlage SFIC, Arrow (in clud ing Flex Core),
Best (including PKS & Peaks), InstaKey, Kaba Peaks, Keymark and KSP cores.
The following larger format interchangeable cores will work with the T Series locksets when lockset is so specified:
Assa
old and new style
Specify IC-AS
Corbin Russwin
8000 or 8000-7
Specify IC-CR6
or IC-CR7
Medeco
32 Series 6-pin
Specify IC-ME
Medeco
31 Series 6-pin
Specify IC-YA6
Sargent
6300
Specify IC-SA
Schlage 6-pin
including Primus
Specify IC-SC
Yale 6-pin
Specify IC-YA6
Falcon
Assa Corbin
Russwin Medeco
32 Medeco
31 Sargent
6300 Schlage Yale
RU Series Preassembled Grade 1 LOCKS
51
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Prices subject to change without notice
Cylinder Options • RU-Series
Notes: 1) Finishes: 606 and 626 only
2) Specify keyway
3) Cylinders are furnished G keyway, keyed differently unless otherwise specified.
4) Restricted sections add $10.80 to list price. See page 8 for list of standard keyways.
All other keyways are considered restricted. Contact 877-671-7011 for availability.
* Competitor keyways are furnished 0 bitted, unless otherwise specified. Not available Master keyed, except Schlage C.
KD option is not available for locks containing 2 cylinders.
Note: 5) Control keys are not furnished with locks and must be ordered separately. See page 151 for details policy
on use of restricted keyway cylinders. Contact 877-671-7011 for availability.
* Keying must be specified
** Locks are assessed one non-refundable handling charge (50-231F) per core.
RU Series • Complete Cylinders
Cylinder Mechanism Part Number Price Each
5 pin cylinder RU series (except 381 IS, 571) A23151-05
$54.00
5 pin cylinder RU series 381 IS A23151-06
5 pin cylinder RU series 571 A23151-07
6 pin cylinder RU series (except 381 IS, 571) A23161-05
6 pin cylinder RU series 381 IS A23161-06
6 pin cylinder RU series 571 A23161-07
7 pin cylinder RU series (except 381 IS, 571) A23171-05
69.007 pin cylinder RU series 381 IS A23171-06
7 pin cylinder RU series 571 A23171-07
Conventional Cylinder Options
Description Specify
Add to Lock
Price (per core)
5 pinned cylinder P Suffix
Example: RU581P STD
6 pinned cylinder P6 Suffix
Example: RU581P6 N/C
7 pinned cylinder P7 Suffix
Example: RU581P7 $11.50
6 pinned Competitor keyway cylinders* P6 Suffix
Example: RU581P6 (0 Bitted, KD, KA4 only) N/C
Schlage C (6 pin only) CP6 Suffix
Example: RU581CP6 (All other keying, not listed above)
Interchangeable Core and Small Format Construction Core
Description Specify
Add to Lock
Price (per core)
Small format core * G Suffix
Example: RU581GD $45.00
Small format core (Best Style) * BB Suffix
Example: RU581BB
Small format construction core ** H Suffix
Example: RU581HD 45.00
Less Small format core B Suffix
Example: RU581BD N/C
Less Full Size core J Suffix
Example: RU581JD SCH x DAN
Small format disposable core BDC Suffix
Example: RU581BDC N/C
RU SeriesPreassembledGrade 1LOCKS
52 Price Book 7
Effective May 4, 2019 • Rev. 05/19
Prices subject to change without notice
RU-Series • Less Components, Thick Door, Tactile Warning, Lead Lining
Locks Less Components
Description Specify
Deduct from
Price (per core)
Less standard cylinder L suffix
Example: RU581LD DAN $54.00
Less latch LLL suffix
Example: RU581PD DAN 626 LLL/5164 7.20
Less strike LLL suffix
Example: RU581PD DAN 626 314691 LLL 8.80
Tactile Warning (Abrasive coat)
Description Specify
Add to
Lock Price
Abrasive Preface the design code with 6
Example: 6DA for DAN $66.30
Lead Lining
Description Specify
Add to
Lock Price
Lead lining Preface the design code with 9
Example: 9DA for DAN $293.00
RU Series Preassembled Grade 1 LOCKS
53
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Prices subject to change without notice
Trim • RU-Series
* Specify design prefix D (Dane), Q (Quantum)
Note: 1) Dane available in 626 and 613 Quantum available in 626.
Levers, Conventional Cylinder
Part Number Description List Price
030742-000 Dane lever, closed
$49.10
030742-001 Dane lever, open
030744-000 Quantum lever, closed
030744-001 Quantum lever, open
030929-002 Lever, Dane open (Corbin Russwin, Medeco, Yale unit) 58.50
030929-003 Lever, Quantum open (Corbin Russwin, Medeco, Yale unit)
030996-002 Lever, Dane open (Sargent 6, 7 & 10 line, Yale) 65.70
030996-003 Lever, Quantum open (Sargent 6, 7 & 10 line, Yale)
A30753-00* Inside lever w/set screw, closed 40.10
A30753-01* Inside lever w/set screw, open
A31544-00* Inside lever w/set screw, closed 851/881 101.00
Levers and related parts, Small Format and Large Format Interchangeable Core
Part Number Description List Price
030742-002 Lever, Dane SFIC $49.10
030744-002 Lever, Quantum SFIC
030926-002 Lever, Dane IC, ASSA, Medeco, Yale 105.00
030926-003 Lever, Quantum IC, ASSA, Medeco, Yale
030927-002 Lever, Dane IC, Schlage 105.00
030927-003 Lever, Quantum IC, Schlage
030928-002 Lever, Dane IC, Corbin Russwin 102.00
030928-003 Lever, Quantum IC, Corbin Russwin
030930-002 Lever, Dane IC, Sargent 109.00
030930-003 Lever, Quantum IC, Sargent
Roses
Part Number Description List Price
031452-000 Rose, square $33.60
RU SeriesPreassembledGrade 1LOCKS
54
Prices subject to change without notice
Price Book 7
Effective May 4, 2019 • Rev. 05/19
RU-Series • Miscellaneous Parts
Miscellaneous Parts
Part Number Description List Price
022104-000-30 Short Slide Catch $0.88
022105-000-30 Slide Catch 2.50
022106-002-55 Retractor 3.10
022108-000-60 Retractor Spring 1.90
022112-000-30 Retainer, Retractor Spring 1.90
022986-001-50 Retractor Insert 0.62
030703-000-30 Inner Spindle, Passage and Button Functions 26.00
030704-002-30 Lever Stop Plate 3.70
030709-000-60 Clutch Spring 0.42
030712-000-30 Mounting Plate, Inner 3.60
030712-001-30 Mounting Plate, Outer 3.20
030718-000-30 Key Spindle, std 4.60
030718-001-30 Key Spindle, IC
030722-000-30 Dogging Bar 3.10
030724-000-30 Lever Retaining Ring 0.62
030726-000-30 Flanged Nut 7.30
030726-007-30 Flanged Nut, Inner Electrified 10.20
030728-000 Push Button Cap 9.60
030733-000-55 Spindle Inner 3.30
031511-000-30 Hex Nut, 1/-28 Special 8.10
031514-000-30 Solenoid Mount 10.40
031519-000-30 Inner Spindle, RU851/881 41.00
1387 Hex Key – 1/8" with Looped Handle 15.40
1388 Hex (castle) Not installation tool 35.50
A30746-000-00 Hub & Housing Assembly 15.20
A30747-000-00 Hub & Plate Assembly 14.00
A30749-060-00 Insert & Spindle Assembly, Outer, 6 Pin 99.50
A30749-070-00 Insert & Spindle Assembly, Outer, 7 Pin 59.40
A30905-001-00 Spindle & Driver Assembly, IC
55.80A30905-060-00 Spindle & Driver Assembly, 6 Pin
A30906-070-00 Spindle & Driver Assembly, 7 Pin
A30913-000-00 Key Spindle Assembly, Inner Std. 163.00
A30913-001-00 Key Spindle Assembly, Inner IC
Q330-272 RU Lock Spring Cage Kit (for all functions except RU101 and RU301) 38.90
Q330-273 RU Lock Spring Cage Kit (RU101 and RU301)
Screws
Part Number Description Finishes Size List Price
002762-000 RU latch screw 606, 613, 626 8-32 x3/8 $0.34
002770-016-30 Insert screws –10-32 x 1 0.48
021164-016 ANSI strike screws 606, 613, 626, 630 12-24 x 1" combo 0.56
024416-012 Latch and strike screws 606, 613, 626, 630 8-32 x 3/4"combo 0.32
030755-005-30 Type D screw – 8-32 x 5/16" 0.42
030831-004-30 Set screw – 1/4-20 x 1/4" 0.60
031533-006-30 Self tap screw – 8-32 x 3/8" 0.44
031541-006-30 Mounting plate screws – 8-32 x 1/2" 0.46
RU Series Preassembled Grade 1 LOCKS
55
Prices subject to change without notice
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Cylinder & IC Parts • RU-Series
* Arrow, Best, InstaKey. Kaba Peaks, Keymark, KSP and Schlage small format cores all use the Falcon configuration.
Tailpieces for Conventional Cylinders
Cylinder Std. Functions RU381 Inside RU571 Price
Falcon 6-pin* (10/pack) A30730-001-00 A30730-003-00 A30730-002-00 $23.10 pkg. of 10
Falcon 7-pin (10/pack) A30730-002-00 A30730-004-00 A30730-006-00 $23.10 pkg. of 10
Sargent 6 & 10 Line 030997-001-30 030997-003-30 030997-005-30 12.20
Yale1801, 5801 030917-001-30 030917-003-30 030917-005-30 34.90 each
Corbin Russwin 030994-001-30 030994-003-30 030994-005-30 65.80
IC Throw Members (Tailpieces)
Core Type Std. Functions RU381 Inside RU571 Price
Falcon 6-pin* 030739-000-30 030739-004-30 $2.90
Falcon 6-pin* 030739-002-30 9.90
Falcon 7-pin* 030739-001-30 030739-005-30 2.90
Falcon 7-pin * 030739-003-30 2.90
Corbin Russwin 8000 and Sargent 6300 031468-000-30 031468-002-30 031468-004-30 7.50
Corbin Russwin 8000-7 (7-pin) 031468-001-30 031468-003-30 031468-005-30 7.50
Medeco 32 Series & ASSA A30988-000-00 A30988-002-00 A30988-000-00 6.40
Schlage full size, including Primus 031467-000-30 031467-002-30 031467-004-30 15.30
Yale and Medeco 31 Series 6-pin 030917-001-30 030917-003-30 030917-005-30 34.90
RU SeriesPreassembledGrade 1LOCKS
56 Price Book 7
Effective May 4, 2019 • Rev. 05/19
Prices subject to change without notice
RU-Series Notes
RU Series Preassembled Grade 1 LOCKS
57
Prices subject to change without notice
Price Book 7
Effective May 4, 2019 • Rev. 05/19
T-Series
Introduction
Standard Features - Furnished unless otherwise specified
Certification ANSI A156.2, Series 4000, Grade 1, UL Listed for 3-Hour fire door
Latch 1-1/8" x 2-1/4", Square corner faceplate, 1" housing diameter, 1/2" throw, 2-3/4" backset
Strike 1-1/4" x 4-7/8", ANSI, Square corner, no box
Cylinder 6-Pin, Solid brass, Keyed 5-Pin, Falcon G keyway, Keyed different (KD)
Door Range 1-3/4" - 2-1/8" standard
Keys Two, Nickel silver cut keys per lock, Falcon G keyway
T SeriesCylindricalGrade 1LOCKS
Finish Codes and Descriptions
Code Description
605 (US3) Bright Brass
606 (US4) Satin Brass
613 (US10B) Oil Rubbed Bronze
619 (US15) Satin Nickel
622 Matte Black
625 (US26) Bright Chrome
626 (US26D) Satin Chrome
643E (US11) Aged Bronze
Product Identification
T 501 P D
Latch Suffix
D = Deadlatch
S = Springlatch
Cylinder Suffix
B = Less SFIC
BB = With SFIC Core (Best)
BDC = Disp. Const. Core
G = With SFIC Core (Falcon)
H = With SFIC Keyed Const.
Core
J = Full Size IC
(Specify Manufacturer)
L6 = Less 6-Pin Cylinder
L7 = Less 7-Pin Cylinder
P = 6-Pin Cylinder pinned
to 5 chambers
P6 = 6-Pin Cylinder pinned
to 6 chambers
P7 = 7-Pin Cylinder
to 7 chambers
CP6 = 6-Pin Cylinder
Schlage C
Function
See 59
Lock Series
SFIC = Small Format (Best® Style) Interchangeable Core
Table of Contents
Function Chart 59
Complete Lock Pricing 60
Options & Parts
Cylinders ........................................................................................61
Tailpieces ......................................................................................62
Order Detail .................................................................................63
Competitor Cylinders ................................................................64
Lock Less Components ............................................................65
Non-Standard Door Thickness .............................................. 65
Tactile Warning ..........................................................................65
Lead Lining ..................................................................................65
Allegion Connect ........................................................................65
Latches with Locks ....................................................................65
Strikes ...........................................................................................66
Levers ............................................................................................ 67
Roses ............................................................................................. 67
Misc. Parts ....................................................................................68
Chassis Assemblies ...................................................................68
Screws ........................................................................................... 69
58 Price Book 7
Effective May 4, 2019 • Rev. 05/19
Prices subject to change without notice
Mounting screws
Inside lever
Inside rose
Inner mounting plate
Flange nut
Inside spring case
Reversible deadlatch
Outside lever/chassis
T Series
GRADE 1 CYLINDRICAL LOCK
T Series Cylindrical Grade 1 LOCKS
59
Prices subject to change without notice
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Key-In-Lever Locks
FALCON ANSI
T521 F81 Office Lock
Turn button locking. Turning button locks outside
lever requiring use of key until button is manually
unlocked. Inside lever always free. Deadlocking latch
bolt.
T561 F84 Classroom Lock
Deadlocking latch bolt by levers. Outside lever is
locked by key in outside lever. Inside lever is always
free.
T571 F90 Dormitory/Corridor Lock
Deadlocking latch bolt by levers except when locked
by push button in inside lever. Key in outside lever
locks or unlocks outside lever and releases button.
Closing door releases push button. Inside lever
always free.
T581 F86 Storeroom Lock
Deadlocking latch bolt by lever inside or key outside.
Outside lever is inoperable. Inside lever always free.
T851 Storeroom (Electrified – Fail Safe)
Latch bolt operated by lever from either side except
when outer lever is electrically locked. When outer
lever is locked (inoperable), latch bolt retracted
by key in cylinder outside. Available in both 12 (.65
Amps) or 24 (.32 Amps) volt DC, continuous duty.
T881 Storeroom (Electrified – Fail Secure)
Deadlocking latch bolt operated by lever inside at
all times. Outside lever inoperable until electrically
unlocked, then latch bolt from either side. When
outside lever is inoperable latch bolt retracted by
key in cylinder outside. Available in both 12 (.65
Amps) or 24 (.32 Amps) volt DC, continuous duty.
T12 Dummy Trim
Single Trim-surface mounted rigid lever.
ANSI A156.2 Series 4000 Grade 1
Key-In-Lever Locks
FALCON ANSI
T101 F75 Passage/Closet Latchset
Latch bolt by levers at all times.
T291 Privacy Hospital Lock
Latch bolt by levers. Outside lever locked by
push button in inside lever. Rotating inside
lever, closing door, or turning emergency
release turn button on outside, release push
button. Inside is always free for egress.
T301 F76 Privacy Lock
Latch bolt by levers. Outside lever locked by
push button in inside lever. Rotating inside
lever or closing door releases push button.
Emergency release in outside lever unlocks
door.
T351 Closet Lock
Deadlocking latch bolt by turn knob inside
or lever outside except when outside lever is
locked by key.
T381 F88 Classroom Security Lock
Latchbolt operated by lever from either
side except when key from inside lever locks
outside lever. When outside lever is locked,
latchbolt retracted by key in outside lever or
by turning inside lever.
T411 F87 Asylum Lock*
Deadlocking latch bolt operated by key in
lever from either side. Both levers always
inoperable.
T501 F82 Entry Lock
Push button locking. Button on inside locks
outside lever until unlocked by key or by
rotating inside lever. Inside lever always free.
Deadlocking latch bolt.
T511 F109 Entry/Office Lock
Turn/push button locking. Pushing and
turning button locks outside lever requiring
use of key until button is manually unlocked.
Push button locking. Pushing button locks
outside lever until unlocked by key or by
rotating inside lever. Inside lever always free.
Deadlocking latch bolt.
Functions • T-Series
* Caution: Double cylinder locks on residences and any door, in any
structure, which is used for egress are a life safety hazard in times of
emergency and their use is not recommended. Installation should be
in accordance with existing codes only.
T SeriesCylindricalGrade 1LOCKS
60
Prices subject to change without notice
Price Book 7
Effective May 4, 2019 • Rev. 05/19
T-Series • Complete Locks Grade 1 Extra Heavy Duty Cylindrical Locksets
ANSI-A156.2, SERIES 4000, GRADE 1
A (Avalon)
LON (Longitude)*
LAT (Latitude) D (Dane)
BRW (Broadway)
Q (Quantum)
BRK (Boardwalk)
Key-In-Lever
Function Description
Designs and Finishes
A D Q LAT LON BRW BRK
626 643E 605 606 613 619 622 625
Single Cylinder Functions
T351PD Closet
$430.00 $442.00
T501PD Entry
T511PD Entry/Office
T521PD Office
T561PD Classroom
T571PD Dormitory/Corridor
T581PD Storeroom
T851PD1Elec. Storeroom – Fail Safe 784.00 796.00
T881PD1Elec. Storeroom – Fail Secure
Double Cylinder Functions
T381PD Exit Security $504.00 $516.00
T411PD Asylum
CAUTION: Double cylinder locks on residences and any door in any structure which is used for egress are a life safety hazard in times of emergency
and their use is not recommended. Installation should be in accordance with existing codes only.
Non-Keyed Functions
T101S Passage $308.00 $320.00
T291S Hospital/Grade School Privacy 386.00 398.00
T301S Privacy
Dummy Trim
T12 Half Dummy $137.00 $143.00
T Series Cylindrical Grade 1 LOCKS
Notes: 1) 24V is standard. Power supply PS902 will be sufficient to operate an individual lock for multiple lock installation -
see Power Supply section.
61
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Prices subject to change without notice
Cylinder Options • T-Series
Notes: 1)Finishes: 606, 622*, & 626 only
2) Specify keyway
3) Cylinders are furnished G keyway, keyed differently unless otherwise specified.
4) Restricted sections add $10.80 to list price. See page 8 for list of standard keyways.
All other keyways are considered restricted. Contact 877-671-7011 for availability.
5) 622 Finish is available only on Allegion cylinders (P, P6, & P7) in C & G Keyways.
* Competitor keyways are furnished 0 bitted, unless otherwise specified. Not available Master keyed, except Schlage C.
KD option is not available for locks containing 2 cylinders.
Note: 6) Control keys are not furnished with locks and must be ordered separately. See page 151 for details.
7) 622 Finish is available only on SFIC (G) in C & G Keyways.
* Keying must be specified
** Locks are assessed one non-refundable handling charge (50-231F) per core.
T Series • Complete Cylinders
Cylinder Mechanism Part Number Price Each
5 pin cylinder T series (except 381 IS, 571) A23151-05
$58.00
5 pin cylinder T series 381 IS A23151-06
5 pin cylinder T series 571 A23151-07
6 pin cylinder T series (except 381 IS, 571) A23161-05
6 pin cylinder T series 381 IS A23161-06
6 pin cylinder T series 571 A23161-07
7 pin cylinder T series (except 381 IS, 571) A23171-05
73.007 pin cylinder T series 381 IS A23171-06
7 pin cylinder T series 571 A23171-07
Conventional Cylinder Options
Description Specify
Add to Lock
Price (per core)
5 pinned cylinder P Suffix
Example: T581P STD
6 pinned cylinder P6 Suffix
Example: T581P6 N/C
7 pinned cylinder P7 Suffix
Example: T581P7 $11.50
6 pinned Competitor keyway cylinders* P6 Suffix
Example: T581P6 (0 Bitted, KD, KA4 only)
Schlage C (6 pin only) CP6 Suffix
Example: T581CP6 (All other keying, not listed above) N/C
Small Format Interchangeable Core and Small Format Construction Core
Description Specify
Add to Lock
Price (per core)
Small format core * G Suffix
Example: T581GD $45.00
Small format core (Best Style) * BB Suffix
Example: T581BB
Small format construction core ** H Suffix
Example: T581HD 45.00
Less Small format core B Suffix
Example: T581BD N/C
Less Full Size core J Suffix
Example: T581JD SCH x DAN
Small format disposable core BDC Suffix
Example: T581BDC N/C
T SeriesCylindricalGrade 1LOCKS
62
Prices subject to change without notice
Price Book 7
Effective May 4, 2019 • Rev. 05/19
T-Series • Cylinder Parts
* Assa 65611 and 65661, Corbin Russwin 2000-034 and Schlage, including Primus, all use the Falcon 6-pin tailpiece.
* Arrow, Best, InstaKey, Kaba Peaks, Keymark, KSP and Schlage small format cores all use the Falcon configuration.
Tailpieces for Conventional Cylinders
Cylinder Std. Functions T381 Inside T571 Price
Falcon 6-pin* (10/pack) A30730-001-00 A30730-003-00 A30730-002-00 $23.10 pkg. of 10
Falcon 7-pin (10/pack) A30730-002-00 A30730-004-00 A30730-006-00 $23.10 pkg. of 10
Sargent 6 & 10 Line 030997-001-30 030997-003-30 030997-005-30 12.20 each
Yale1801, 5801 030917-001-30 030917-003-30 030917-005-30 34.90 each
Corbin Russwin 030994-001-30 030994-003-30 030994-005-30 65.80
IC Throw Members (Tailpieces)
Cylinder Std. Functions T381 Inside T571 Price
Falcon 6-pin* 030739-000-30 030739-000-30 $2.90
Falcon 6-pin* 030739-002-30 9.90
Falcon 7-pin* 030739-001-30 030739-001-30 2.90
Falcon 7-pin* 030739-003-30 2.90
Corbin Russwin 8000 and Sargent 6300 031468-000-30 031468-002-30 031468-004-30 7.50
Corbin Russwin 8000-7 (7-pin) 031468-001-00 031468-003-30 031468-005-30 7.50
Medeco 32 Series & ASSA A30988-000-00 A30988-002-00 A30988-000-00 6.40
Schlage Full Size, Including Primus 031467-000-30 031467-002-30 031467-004-30 15.30
Yale and Medeco 31 Series, 6-pin 030917-001-30 030917-003-30 030917-005-30 34.90
T Series Cylindrical Grade 1 LOCKS
63
Prices subject to change without notice
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Order Detail • T-Series
Specify cylinder requirements.
Note: Locks furnished with Falcon’s standard “G” keyway cylinder or prepared for Falcon interchangeable core unless otherwise specified.
With Cylinder
Falcon IC
o6-pin
o 7-pin
Falcon Conventional
o 6-pin
specify keyway
o 7-pin
specify keyway
Competitors’ Keyways -
6-pin Conventional Cylinder*
o Corbin - 60, 0 Bitted, KD
o Russwin - D1, 0 Bitted, KD
o Sargent - LA, 0 Bitted, KD (Also accepts LB, LC keys)
o Schlage - C, 0 Bitted, KD, KA4
o Schlage - E, 0 Bitted
o Yale - 8 (Para), 0 Bitted, KD
Less Cylinder - Prepared to Accept**
oFalcon IC
Falcon Conventional
o 6-pin
o 7-pin
Unit / Mono Lock Cylinders
o Falcon Standard (R Series old small plug) 6-pin
o Corbin Russwin Unit Lock
(2000-052) - Master Ring not available
o Medeco Unit Lock Retrofit Cylinder
(20W5005) - Corbin Russwin Unit Lock
o Medeco Unit Lock Retrofit Cylinder
(20W0500) - Yale 6200 Mono Lock
o Yale Mono Lock (1801) and later models
Competitors’ Conventional Cylinders
o Assa (65611 or 65661) 6-pin
o Corbin Russwin (2000-034 / CL3400) 6-pin-
Master Ring not available
o Medeco (20W200V3) 6-pin
- tailpiece supplied by Medeco
- Falcon / Schlage style
o Peaks (Kaba) 6-pin
o Primus (Schlage) 6-pin
o Sargent (6, 7 & 10 Line) 6-pin - Keso not available
o Schlage 6-pin
o Yale (1801) 6-pin - Bicentric not available
Competitors’ IC
o Arrow 6, 7-pin
o Assa (70600IC & V70600IC) 6-pin
o Best 6, 7-pin
o Corbin Russwin (8000) 6-pin
o Corbin Russwin (8000-7) 7-pin
o InstaKey
o Medeco 31 Series 6-pin
o Medeco 32 Series 6-pin
o Medeco Keymark 6, 7-pin
o Peaks (Kaba) 6, 7-pin
o Primus (Schlage) 6-pin
o Sargent (6300) 6-pin
o Schlage 6-pin
o Yale (1210) 6-pin
* Generic replacement cylinders with competitors’ keyways. ** Proper tailpiece supplied unless otherwise noted.
T SeriesCylindricalGrade 1LOCKS
64 Price Book 7
Effective May 4, 2019 • Rev. 05/19
Prices subject to change without notice
T-Series • Competitors’ I-Cores & Competitors’ Standard Cylinder
Compatibility with Competitors’ I-Cores
Falcon’s standard interchangeable core option. Specify 6 or 7-pin.
Locksets with this option also accept Schlage SFIC, Arrow (in clud ing Flex Core),
Best (including PKS & Peaks), InstaKey, Kaba Peaks, Keymark and KSP cores.
The following larger format interchangeable cores will work with the T Series locksets when lockset is so specified:
Assa
old and new style
Specify IC-AS
Corbin Russwin
8000 or 8000-7
Specify IC-CR6
or IC-CR7
Medeco
32 Series 6-pin
Specify IC-ME
Medeco 31
31 Series 6-pin
Specify IC-YA6
Sargent
6300
Specify IC-SA
Schlage 6-pin
including Primus
Specify IC-SC
Yale 6-pin
Medeco 31 Series
Specify IC-YA6
Falcon
Assa Corbin
Russwin Medeco
32 Medeco
31 Sargent
6300 Schlage Yale
Compatibility with Competitors’ Standard Cylinders
The T Series is furnished with Falcon’s standard “G” keyway cylinder unless otherwise specified, and accepts the following competitors’
standard 6-pin cylinders.
o Assa (65611 or 65661) 6-pin
o Corbin Russwin (2000-034 / CL3400) 6-pin -
Master Ring not available
o Medeco (20W200V3) 6-pin
- tailpiece supplied by Medeco
- Falcon / Schlage style
o Peaks (Kaba) 6-pin
o Primus (Schlage) 6-pin
o Sargent (6, 7 & 10 Line) 6-pin - Keso not available
o Schlage 6-pin
o Yale (1801) 6-pin - Bicentric not available
T Series Cylindrical Grade 1 LOCKS
65
Prices subject to change without notice
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Special Options • T-Series
Locks Less Components
Description Specify Deduct from
Lock Price
Less each lever LLL
Example: T581PD LLL/DAN $23.90
Less standard cylinder L suffix
Example: T581LD DAN 55.60
Less latch LLL
Example: T581PD DAN 626 LLL/5164 37.30
Less strike LLL
Example: T581PD DAN 626 98535 LLL 8.90
Non-Standard Door Thickness
Description Specify Add to
Lock Price
Door thickness 1-3/8" to 1-3/4" A30775-000-00 for thin door shims $12.40
Tactile Warning (abrasive coat)
Description Specify Add to
Lock Price
Abrasive Strip* Preface the design code with 6
Example: 6DA for DAN $58.40
Lead Lining
Description Specify Add to
Lock Price
Lead lining Preface the design code with 9
Example: 9DA for DAN $268.00
Part Number Description Price
24483760 latch spacer for hollow door applications $5.10
Note: 1) T Series lockset will accommodate up to a 2-1/8" thick door prep standard.
Note: 2) Outside lever only is coated unless otherwise specified.
* Not available in 613, Latitude, Longitude, Broadway, & Boardwalk Levers.
Note: 3) Lead Lining is not available on Latitude, Longitude, Broadway, & Boardwalk levers.
Latches with Locks
Backset Description
HSG
Dia
Specify Add to
Lock PriceSpringlatch Deadlatch
2-3/8" Square corner, 1" x 2-1/4"
1"
23981111 23981160 N/C
2-3/4" Square corner, 1-1/8" x 2-1/4", std. 23981137 23981145
2-3/4" Anti-friction fire door latch
Square corner, 1-1/8" x 2-1/4", 3/4" throw – 23981152 $182.00
3-3/4" Square corner, 1-1/8" x 2-1/4" 24074387 23981129 N/C
5" Backset extension Link 43-005 31.00
Allegion Connect
Suffix List Add
CON Cross-category solution using common interconnect components for electrified options. Available on the
T851 and T881 functions. For wire harness options refer to Electronic Power Supplies Section. N/C
T SeriesCylindricalGrade 1LOCKS
66
Prices subject to change without notice
Price Book 7
Effective May 4, 2019 • Rev. 05/19
T-Series • Latches and Strikes
Shaded items are standard components and are furnished with locks unless otherwise specified.
Latches sold separate
Finishes: 606, 613, 630
Specify
Backset Description
HSG
Dia List PriceSpringlatch Deadlatch
23981111 23981160 2-3/8" Square corner, 1" x 2-1/4"
1"
$93.10
23981137 23981145 2-3/4" Square corner, 1-1/8" x 2-1/4", std. 71.50
– 23981152 2-3/4" Anti-friction fire door latch
Square corner, 1-1/8" x 2-1/4", 3/4" throw 274.00
24074387 23981129 3-3/4" Square corner, 1-1/8" x 2-1/4" 85.80
43-005 5" Backset extension Link 33.10
Strikes with Locks
Description Lip Length Specify Add to Lock Price
ANSI, 1-1/4" x 4-7/8" standard 1-3/16” 5164 N/C
Square corner, full lip 1-5/8" x 2-1/4" 1” 01-049 N/C
1/4" Radius round corner, full lip 1-5/8" x 2-1/4" 1” 01-048 N/C
Square Corner, T-strike, 1-1/8" x 2-3/4" 1-5/16” 5185 N/C
ANSI dust box 1" deep, steel - 005099-000-30 N/C
ANSI 1-1/4” x 4-7/8” 7/8” 5161 N/C
Radius T Strike, 1-1/8” x 2-3/4” 9/16” 5185-4 N/C
Strikes sold separate
Description Lip Length Specify List Price
ANSI, 1-1/4" x 4-7/8" standard 1-3/16” 005164-000 $13.80
Square Corner, T-strike, 1-1/8" x 2-3/4" 1-1/8" A05185-000 4.30
1/4" Radius round corner, full lip 1-5/8" x 2-1/4" 1" Q001-048 4.30
Square corner, full lip 1-5/8" x 2-1/4" Q001-049
ANSI dust box 1" deep, steel - 005099-000-30 3.20
ANSI 1-1/4” x 4-7/8” 7/8” 005161-000 23.20
Radius T Strike, 1-1/8” x 2-3/4” 9/16” A05185-004 29.00
T Series Cylindrical Grade 1 LOCKS
67
Prices subject to change without notice
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Levers and Parts • T-Series
Note: 1) When ordering levers or roses, specify finish.
Note: 2) Competitor prepped levers are not available in 622 Finish.
Levers, Conventional Cylinder
Part Number Description List Price
030740-000 Avalon lever, closed
$49.10
030740-001 Avalon lever, open
Q330-430 BRK Boardwalk lever, closed
Q330-431 BRK Boardwalk lever, open
Q330-430 BRW Broadway lever, closed
Q330-431 BRW Broadway lever, open
030742-000 Dane lever, closed
030742-001 Dane lever, open
Q330-430 LAT Latitude lever, closed
Q330-431 LAT Latitude lever, open
Q330-430 LON Longitude lever, closed
Q330-431 LON Longitude lever, open
030744-000 Quantum lever, closed
030744-001 Quantum lever, open
030929-001 Lever, Avalon open (Corbin Russwin, Medeco, Yale unit)
58.50030929-002 Lever, Dane open (Corbin Russwin, Medeco, Yale unit)
030929-003 Lever, Quantum open (Corbin Russwin, Medeco, Yale unit)
030996-001 Lever, Avalon open (Sargent 6, 7 & 10 line, Yale)
65.70030996-002 Lever, Dane open (Sargent 6, 7 & 10 line, Yale)
030996-003 Lever, Quantum open (Sargent 6, 7 & 10 line, Yale)
A30753-00* Inside lever w/set screw, closed 40.10
A30753-01* Inside lever w/set screw, open
A31544-00* Inside lever w/set screw, closed 851/881 101.00
Levers, Small and Large Format Interchangeable Core
Part Number Description List Price
030740-002 Lever, Avalon SFIC
$49.10
Q330-432 BRK Lever, Boardwalk SFIC
Q330-432 BRW Lever, Broadway SFIC
030742-002 Lever, Dane SFIC
Q330-432 LAT Lever, Latitude SFIC
Q330-432 LON Lever, Longitude SFIC
030744-002 Lever, Quantum SFIC
030926-001 Lever, Avalon IC, ASSA, Medeco, Yale
105.00030926-002 Lever, Dane IC, ASSA, Medeco, Yale
030926-003 Lever, Quantum IC, ASSA, Medeco, Yale
030927-001 Lever, Avalon IC, Schlage
105.00
Q330-433 BRK Lever, Boardwalk FSIC
Q330-433 BRW Lever, Broadway FSIC
030927-002 Lever, Dane IC, Schlage
Q330-433 LAT Lever, Latitude FSIC
Q330-433 LON Lever, Longitude FSIC
030927-003 Lever, Quantum IC, Schlage
030928-001 Lever, Avalon IC, Corbin Russwin
102.00030928-002 Lever, Dane IC, Corbin Russwin
030928-003 Lever, Quantum IC, Corbin Russwin
030930-001 Lever, Avalon IC, Sargent
109.00030930-002 Lever, Dane IC, Sargent
030930-003 Lever, Quantum IC, Sargent
Roses
Part Number Description List Price
626 643E 605 606 613 619 622
030706-002 Rose cover $23.70 $26.70
T SeriesCylindricalGrade 1LOCKS
68
Prices subject to change without notice
Price Book 7
Effective May 4, 2019 • Rev. 05/19
T-Series • Levers and Parts
Miscellaneous Parts
Part Number Description List Price
022104-000-30 Short Slide Catch 0.88
022105-000-30 Slide Catch 2.50
022106-002-55 Retractor 3.10
022108-000-60 Retractor Spring 1.90
022112-000-30 Retainer, Retractor Spring 1.90
022986-001-50 Retractor Insert 0.62
030654-000-625 Emergency Release Cap 2.30
030654-000-626 Emergency Release Cap 2.80
030703-000-30 Inner Spindle, Passage and Button Functions 26.00
030704-002-30 Lever Stop Plate 3.70
030709-000-60 Clutch Spring 0.42
030712-000-30 Mounting Plate, Inner 3.60
030712-001-30 Mounting Plate, Outer 3.20
030722-000-30 Dogging Bar 3.10
030724-000-30 Lever Retaining Ring 0.62
030726-000-30 Flanged Nut 7.30
030726-007-30 Flanged Nut, Inner Electrified 10.20
030728-000 Push Button Cap 9.60
030729-000-70 Outer Button Mount 1.30
030733-000-55 Spindle Inner 3.30
030787-000-70 Button Spacer 2.40
M204-198 Drill guide for locating 5/16" thru-bolt holes 15.20
031516-000-70 Solenoid, Fail secure T881 377.00
031511-000-30 Hex Nut, 1/-28 Special 8.10
031514-000-30 Solenoid Mount 10.40
031519-000-30 Inner Spindle, T851/881 41.00
1387 Hex Key – 1/8" with Looped Handle 15.30
1388 Hex Wrench 35.50
A30746-000-00 Hub & Housing Assembly 15.20
A30747-000-00 Hub & Plate Assembly 14.00
A30749-060-00 Insert & Spindle Assembly, Outer, 6 Pin 99.50
A30749-070-00 Insert & Spindle Assembly, Outer, 7 Pin 59.40
A30906-001-00 Spindle & Driver Assembly, IC 55.80
A30775-000-00 Door thickness 1-3/8" to 1-3/4" Door Shims 12.40
A30906-060-00 Spindle & Driver Assembly, 6 Pin 55.80
A30906-070-00 Spindle & Driver Assembly, 7 Pin
Q330-270 T Lock Spring Cage Kit (Inside for T411 and outside for all functions except T101, T291, T301) 40.10
Q330-271 T Lock Spring Cage Kit (Inside- all functions except T411 and inside & outside for T101, T291, T301)
030718-000-30 Key Spindle Assembly T501, T511 T521, T851, T881 STD and T381 Outside STD 4.70
030718-001-30 Key Spindle Assembly T501, T511 T521, T851, T881 IC and T381 Outside IC 4.70
A30913-000-00 Key Spindle Assembly T381 Inside STD 168.00
A30913-001-00 Key Spindle Assembly T381 Inside IC
A30780-000-00 Key Spindle Assembly T351, T561 STD 168.00
A30780-001-00 Key Spindle Assembly T351, T561 IC 168.00
A30915-000-00 Key Spindle Assembly T571 STD 81.10
A30915-001-00 Key Spindle Assembly T571 IC 79.50
030732-000-30 Key Spindle Assembly T581 STD 4.90
030732-001-30 Key Spindle Assembly T581 IC 4.90
T Series Cylindrical Grade 1 LOCKS
69
Prices subject to change without notice
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Chassis and Parts • T-Series
Screws
Part Number Description Finishes Size List Price
021164-016 ANSI strike screws 606, 613, 622, 626, 630 12-24 x 1" combo $0.56
024416-012 Latch and strike screws 606, 613, 622, 626, 630 8-32 x 3/4" combo 0.32
030755-005-30 Type D screw - 8-32 x 5/16" 0.42
030831-004-30 Set screw for standard lever - 1/4 x 20 x 1/4" 0.58
031515-004-30 Fillister Head Screw - 4-40 x 1/4" 2.20
031531-006-30 Set Screw for electrified screw - 1/4-20 x 3/8" 0.50
031533-006-30 Self Tap Screw - 8-32 x 3/8" 0.44
002770-016-30 Mounting Screws -10-32 x 1” 0.48
Chassis Assemblies
Part Number
Conventional
Cylinder IC Core Description List Price
A30761-000-00 T101 Chassis $84.50
A30765-000-00 T301 Chassis, T291 Chassis
146.00
A30758-000-00 A30758-001-00 T351/561 Chassis
A30769-000-00 A30769-001-00 T411 Chassis
A30773-000-00 A30773-001-00 T501 Chassis
A30756-000-00 A30756-001-00 T511 Chassis
A30748-000-00 A30748-001-00 T521 Chassis
A30760-000-00 A30760-001-00 T581 Chassis
A30767-000-00 A30767-001-00 T381 Chassis 276.00
A30759-000-00 A30759-001-00 T571 Chassis
A31517-000-00 A31517-001-00 T851 Chassis 787.00
A31518-000-00 A31518-001-00 T881 Chassis
T SeriesCylindricalGrade 1LOCKS
70 Price Book 7
Effective May 4, 2019 • Rev. 05/19
Prices subject to change without notice
T-Series Notes
T Series Cylindrical Grade 1 LOCKS
71
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Prices subject to change without notice
Introduction X-Series
Finish Codes and Descriptions
Code Description
605 (US3) Bright Brass
606 (US4) Satin Brass
613 (US10B) Oil Rubbed Bronze
625 (US26) Bright Chrome
626 (US26D) Satin Chrome
630 (US32D) Satin Stainless
Standard Features - Furnished unless otherwise specified
Certification ANSI A156.2, Series 4000, Grade 1, UL Listed for 3-Hour fire door
Latch 1-1/8" x 2-1/4", Square corner faceplate, 1" housing diameter, 1/2" throw, 2-3/4" backset
Strike 1-1/4" x 4-7/8", ANSI, Square corner, no box
Cylinder 6-Pin, Solid brass, Keyed 5-Pin, Falcon G keyway, Keyed different (KD)
Door Range 1-3/8" - 2-1/8" standard
Keys Two, Nickel silver cut keys per lock, Falcon G keyway
Backset 2-3/4"
X SeriesCylindricalGrade 1LOCKS
Product Identification
X 501 P D
Latch Suffix
D = Deadlatch
S = Springlatch
Cylinder Suffix
B = Less SFIC
BB = With SFIC Core (Best)
BDC = Disp. Const. Core
G = With SFIC Core (Falcon)
H = With SFIC Keyed Const.
Core
L = Less 6-Pin Cylinder
P = 6-Pin Cylinder pinned
to 5 chambers
P6 = 6-Pin Cylinder pinned
to 6 chambers
P7 = 7-Pin Cylinder
to 7 chambers
CP6 = 6-Pin Cylinder
Schlage C
Function
See 72
Lock Series
SFIC = Small Format (Best® Style) Interchangeable Core
Table of Contents
Function Chart 72
Complete Lock Pricing 73
Options & Parts
Latches ................................................................................... 74-75
Strikes ..................................................................................... 74-75
Cylinders ....................................................................................... 76
Knobs .............................................................................................77
Roses ..............................................................................................77
Misc. Parts ..................................................................................... 77
Screws ............................................................................................ 77
Screw Packs .................................................................................77
Lock Less Components ............................................................ 78
Tactile Warning ..........................................................................78
Stainless Steel/Corros. Resist. Chassis ................................78
Non-Standard Door Thickness .............................................. 78
72 Price Book 7
Effective May 4, 2019 • Rev. 05/19
Prices subject to change without notice
Key-In-Knob Locks
FALCON ANSI
X521 F81 Office Lock
Turn button locking. Turning button locks outside
knob requiring use of key until button is manually
unlocked. Inside knob always free.
X561 F84 Classroom Lock
Deadlocking latch bolt by knobs. Outside knob is
locked by key in outside knob. Inside knob is always
free.
X571 F90 Dormitory Lock
Deadlocking latch bolt by knobs except when locked
by push button in inside knob. Key in outside knob
locks or unlocks outside knob and releases button.
Closing door releases push button. Inside knob
always free.
X581 F86 Storeroom Lock
Deadlocking latch bolt by inside knob or key outside.
Outside knob rigid.
X12 Single Dummy Trim
Single Trim–Surface mounted.
ANSI A156.2 Series 4000 Grade 2
Key-In-Knob Locks
FALCON ANSI
X101 F75 Passage/Closet Latchset
Latch bolt by knobs at all times.
X301 F76 Privacy Lock
Latch bolt by knobs. Outside locked by push
button in inside knob. Rotating inside knob or
closing door releases push button. Emergency
release in outside knob. Emergency Release
Tool M504-271.
X411 F87 Asylum Lock*
Deadlocking latch bolt by key from either side.
Both knobs rigid.
X501 F82 Entry Lock
Push button locking. Button on inside locks
outside knob until unlocked by key or by
rotating inside knob.
X511 F109 Entry/Office Lock
Turn/push button locking. Pushing and
turning button locks outside knob requiring
use of key until button is manually unlocked.
Push button locking. Pushing button locks
outside knob until unlocked by key or by
turning inside knob.
X-Series • Functions
* Caution: Double cylinder locks on residences and any door, in any structure, which is used for egress are a life safety hazard
in times of emergency and their use is not recommended. Installation should be in accordance with existing codes only.
X Series Cylindrical Grade 1 LOCKS
73
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Prices subject to change without notice
Key-In-Knob • X -Series
Grade 1 Heavy Duty Cylindrical Locksets
ANSI-A156.2, SERIES 4000, GRADE 1
EG (Elite-Gala) HG (Hana-Gala)** TG (Troy-Gala)
EY (Elite-York) HY (Hana-York)** TY (Troy-York)
** Hana Knob not available in IC
Key-In-Knob
Function Description
Designs and Finishes
EG EY HG HY TG TY TG TY
626 605 606 613 625 630
Single Cylinder Functions
X501PD Entry
$540.00 $552.00 $552.00
X511PD Entry/Office
X521PD Entry/Office
X561PD Classroom
X571PD Dormitory
X581PD Storeroom
Double Cylinder Functions
X411PD Asylum $627.00 $639.00 $639.00
CAUTION: Double cylinder locks on residences and any door in any structure which is used for egress are a life safety hazard in times of emergency and their use is
not recommended. Installation should be in accordance with existing codes only.
Non-Keyed Functions
X101S Passage $385.00 $397.00 $397.00
X301S Privacy 477.00 489.00 489.00
X12 Single Dummy Trim 172.00 178.00 178.00
X SeriesCylindricalGrade 1LOCKS
74
Prices subject to change without notice
Price Book 7
Effective May 4, 2019 • Rev. 05/19
X-Series • Latches and Strikes
Shaded items are standard components and are furnished with locks unless otherwise specified.
Note: 1) Marine non-ferrous mechanism latches can be ordered by adding "OSD" for Deadlatch or "OOS" for Springlatch
2) These latches conform to the standards set forth within ANSI/BHMA 156.2, 156.5, & 156.15 and are suitable for marine applications.
3) Marine latches have a $20.70 add to list price
Note: 1) Stainless steel applications can be substituted for the 2-3/4" backsets. Specify as "S" after part number (ex: 98535S)
* 2-3/8" backset is furnished as a 1" faceplate standard.
** Only available as a deadlatch.
Latches with Locks
Finishes 606, 613, 630
Backset Description Specify Add to Lock Price
2-3/4"
Square corner, 1 1/8" x 2-1/4", std. 98535 N/C
9/16" radius corner, 1-1/8" x 2-1/4" 98538
3/4" proj. square corner, 1-1/8" x 2-1/4" 98835S** $172.00
9/16" radius x 3/4" proj., 1-1/8" x 2-1/4" 98838S**
Square corner, 1" x 2 1/4" 92330 16.10
1/4" Radius round corner, 1" x 2-1/4" 92331
2-3/8"* Square corner, 1" x 2-1/4" 92320 16.10
1/4" Radius round corner, 1" x 2-1/4" 92321
5" Backset Link for 2-3/4" Backset Latch A22161-005-00 130.00
Strikes with Locks
Description Lip Length Specify Add to Lock Price
ANSI, 1-1/4" x 4-7/8" standard 1-3/16” 5164
N/C
Square corner, full lip 1-5/8" x 2-1/4" 1" 01-049
1/4" Radius round corner, full lip 1-5/8" x 2-1/4" 1" 01-048
Square Corner, T-strike, 1-1/8" x 2-3/4" 1-5/16" 5185
Vermin proof strike for ships, 9/16" radius 5133-4 $95.40
2 3/4" high T strike, ANSI A115.3 1 5183
N/C
2 3/4" high T strike, ANSI A115.3 9/16" 5185-4
2 3/4" high T strike, ANSI A115.3 1-9/16" 5186
2 3/4" high T strike, ANSI A115.3 1-13/16" 5187
2 3/4" high T strike, ANSI A115.3 2-1/16" 5188
2 3/4" high T strike, ANSI A115.3 2-5/16" 5189
ANSI dust box 1" deep, steel - 005099-000-30
Dust box, 1/2" deep, use with 2-3/4" strike - 012191-003-70
Dust box, 1/2” deep, stainless steel - 012191-000-60 N/C
ANSI, 1-1/4" x 4-7/8" 7/8" 5161 N/C
Latches sold separate
Finishes: 606, 613, 630
Backset
Latch Face 2-3/8" 2-3/4" List Price
1" Spring Latch A92320-000 A92330-000
$59.20
1" Deadlatch A92320-00D A92330-00D
1" Spring Latch – 1/4" Radius A92321-000 A92331-000
1" Deadlatch – 1/4" Radius A92321-00D A92331-00D
1-1/8" Spring Latch *
-
A98535-000
1-1/8" Deadlatch * A98535-00D
1-1/8" Spring Latch – 9/16" Radius * A98538-000
1-1/8" Deadlatch – 9/16" Radius * A98538-00D
1-1/8" Deadlatch – 3/4" Projection * A98835-0SD 230.00
1-1/8" Deadlatch – 9/16" Rad. X 3/4" Proj. * A98838-0SD
5" Backset Link for 2-3/4" Backset Latch A22161-005-00 103.00
X Series Cylindrical Grade 1 LOCKS
75
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Prices subject to change without notice
Latches and Strikes • X-Series
Strikes sold separate Finishes: 605, 606, 613, 625, 626, 629, 630
Description Lip Length Specify List Price
ANSI, 1-1/4" x 4-7/8" 1-3/16” 005164-000 $13.80
1/4" Radius round corner, full lip 1-5/8" x 2-1/4" 1" Q001-048
4.30Square corner, full lip 1-5/8" x 2-1/4" Q001-049
Square Corner, T-strike, 1-1/8" x 2-3/4" 1-1/8" A05185-000
2-3/4" high T strike, ANSI A115.3 9/16" A05185-004 29.00
2-3/4" high T strike, ANSI A115.3 1" A05183-000
2-3/4" high T strike, ANSI A115.3 1-9/16" A05183-004 48.60
A05186-000
2-3/4" high T strike, ANSI A115.3 1-13/16" A05187-000
54.302-3/4" high T strike, ANSI A115.3 2-1/16" A05188-000
2-3/4" high T strike, ANSI A115.3 2-5/16" A05189-000
Vermin proof strike for ships, 9/16" radius A05133-004-630 74.90
ANSI dust box 1" deep, steel - 005099-000-30 79.70
ANSI dust box 1" deep, stainless steel - 005099-000-60 3.20
Dust box, 1/2" deep, stainless steel 012191-000-60 10.10
Dust box, 1/2" deep, use with 2-3/4" strike 012191-003-70 6.10
ANSI, 1-1/4" x 4-7/8" 7/8" 005161-000 2.30
X SeriesCylindricalGrade 1LOCKS
76 Price Book 7
Effective May 4, 2019 • Rev. 05/19
Prices subject to change without notice
X-Series • Cylinder Options
Notes: 1) Cylinders are furnished G keyway, keyed differently unless otherwise specified.
2) Finishes: 606 and 626 only.
3) Specify keyway
4) Restricted sections add $10.80 to list price. See page 8 for list of standard keyways.
All other keyways are considered restricted. Contact 877-671-7011 for availability.
* Keying must be specified
** Locks are assessed one non-refundable handling charge (50-231F) per core.
* Competitor keyways are furnished 0 bitted, unless otherwise specified. Not available Master keyed, except Schlage C.
KD option is not available for locks containing 2 cylinders.
Note: 5) Control keys are not furnished with locks and must be ordered separately. See page 151 for details
X-Series Complete Cylinders
Cylinder Mechanism Part Number Price Each
5 pin cylinder X411, 501, 511, 521, 581 E & T A23152
$54.00
5 pin cylinder X411, 501, 511, 521, 581 H A23152-02
5 pin cylinder X561 – E and T designs A23151
5 pin cylinder X561 – H designs, 571 – E & T A23151-02
5 pin cylinder X571 – H designs A23151-03
6 pin cylinder X411, 501, 511, 521, 581 E & T A23162
6 pin cylinder X411, 501, 511, 521, 581 H A23162-02
6 pin cylinder X561 – E and T designs A23161
6 pin cylinder X561 – H designs, 571 – E & T A23161-02
6 pin cylinder X571 – H designs A23161-03
7 pin cylinder X411, 501, 511, 521, 581 H A23172-02
69.007 pin cylinder X561 – H designs A23171-01
7 pin cylinder X571 – H designs A23171-02
Conventional Cylinder Options
Description Specify
Add to Lock
Price (per core)
5 pinned cylinder P Suffix
Example: X581P STD
6 pinned cylinder P6 Suffix
Example: X581P6 N/C
7 pinned cylinder P7 Suffix
Example: X581P7 $11.50
6 pinned Competitor keyway cylinders* P6 Suffix
Example: X581P6 (0 Bitted, KD, KA4 only)
Schlage C (6 pin only) CP6 Suffix
Example: X581CP6 (All other keying, not listed above) N/C
Small Format Interchangeable Core and Small Format Construction Core
Description Specify
Add to Lock
Price (per core)
Small format core * G Suffix
Example: X581GD $45.00
Small format core (Best Style) * BB Suffix
Example: X581BB
Small format construction core ** H Suffix
Example: X581HD 45.00
Less Small format core B Suffix
Example: X581BD N/C
Small format disposable core BDC Suffix
Example: X581BDC N/C
X Series Cylindrical Grade 1 LOCKS
77
Prices subject to change without notice
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Parts • X-Series
Note: 1) Hana and Elite not available in 630
Miscellaneous Parts
Part Number Description List Price
012138-000 Push button cap (X301/X501/X571) $2.70
012137-000 Turn button cap (X511/X521) 2.70
012136-000 Button mount For Elite & Troy knobs (X501/X521/X301/X511) 14.40
012236-000 Button mount For Elite & Troy knobs (X571) 14.40
012966-000 Button mount For Hana knobs (X501/X521/X301/X511) 14.40
012967-000 Button mount For Hana knobs (X571) 14.40
012172-000-30 X Lock Spanner Wrench 2.50
Note: Need to specify finish
Screws
Part Number Description Finishes Size List Price
024416-012 Latch and strike screws 606, 613, 626, 630 8-32 x 3/4" combo $0.32
021164-016 ANSI strike screws 606, 613, 626, 630 12-24 x 1" combo 0.56
Screws packs
Part Number Description Specify Finish Contents List price
A03519-000 Screw pack 605, 613, 626 024416-012 (2 ea) $3.50
Knobs
Part Number Description List Price
626 605 606 613 625 630
022258-007 Knob, Troy – Closed
$80.90 $83.90
022258-008 Knob, Troy – Emergency
022258-009 Knob, Troy – SFIC
022290-007 Knob, Troy – Button/Cylinder
022950-007 Knob, Hana – Closed
76.90 79.90022950-008 Knob, Hana – Emergency
022953-007 Knob, Hana – Button/Cylinder
022980-007 Knob, Elite – Closed
69.60 72.60
022980-008 Knob, Elite – Emergency
022980-009 Knob, Elite – SFIC
022981-007 Knob, Elite – Button/Cylinder
Roses
Part Number Description List Price
626 605 606 613 625 630
022920-000 Rose, Gala $30.60 $33.60
024030-000 Rose, York
X SeriesCylindricalGrade 1LOCKS
78
Prices subject to change without notice
Price Book 7
Effective May 4, 2019 • Rev. 05/19
X-Series • Options
Note: 1) Outside lever only is coated unless otherwise specified
Locks Less Components
Description Specify Deduct from
Lock Price
Less each knob LLL for knob design
Example: X581PD LLL/EG $12.60
Less standard cylinder L suffix
Example: X581LD EG 54.00
Less latch LLL for latch
Example: X581PD EG 626 LLL/5164 46.40
Less strike LLL for strike
Example: X581PD EG 626 98535 LLL 11.10
Tactile Warning
Description Specify Add to
Lock Price
Abrasive - 6 Prefix (not available in 613) Preface the design code with 6
Example: 6EG for ELITE GALA $66.20
Knurled - 8 Prefix (not available in 630) Preface the design code with 8
Example: 8EG for ELITE GALA 120.00
Stainless Steel / Corrosion Resistant Chassis
Description Specify Add to
Lock Price
SS – Stainless steel/non-ferrous mechanism After the function code as “SS”
Example: X581 SS PD TG 630 $209.00
Non-Standard Door Thickness
Description Specify Add to
Lock Price
Door thickness over 2-1/8" - 2-1/4" Door thickness and how door is extended
Example: 2-1/4", EE $13.50
X Series Cylindrical Grade 1 LOCKS
Note: 1) When ordering SS you will get the A98538 OSD Deadlatch standard.
79
Prices subject to change without notice
Price Book 7
Effective May 4, 2019 • Rev. 05/19
K SeriesCylindricalGrade 1LOCKS
K-Series
Introduction
Finish Codes and Descriptions
Code Description
613 (US10B) Oil Rubbed Bronze
626 (US26D) Satin Chrome
Standard Features - Furnished unless otherwise specied
Certication ANSI A156.2, Series 4000, Grade 1, UL Listed for 3-Hour re door
Latch 1-1/8" x 2-1/4", Square corner faceplate, 1" housing diameter, 1/2" throw, 2-3/4" backset
Strike 1-1/4" x 4-7/8", ANSI, Square curved lip corner, no box
Cylinder 6-Pin, Solid brass, keyed 5-pin, Falcon G keyway, Keyed different (KD)
Door Range 1-3/8" - 2-1/4" standard, come set for a 1-3/4" thick door standard
Keys Two, Nickel silver cut keys per lock, Falcon G keyway
Product Identification
K 501 P D
Latch Suffix
D = Deadlatch
S = Springlatch
Cylinder Suffix
B = Less SFIC
BB = With SFIC Core (Best)
BDC = Disp. Const. Core
G = With SFIC Core (Falcon)
H = With SFIC Keyed Const.
Core
L = Less 6-Pin Cylinder
P = 6-Pin Cylinder pinned
to 5 chambers
P6 = 6-Pin Cylinder pinned
to 6 chambers
CP6 = 6-Pin Cylinder
Schlage C
Function
See 99
Lock Series
SFIC = Small Format (Best® Style) Interchangeable Core
Table of Contents
Function Charts 80
Levers ........................................................................................... 80
Complete Lock Pricing 81
Levers .............................................................................................81
Options 82
Conventional Cylinder Options .............................................. 82
Latches .........................................................................................83
Strikes ...........................................................................................83
Miscellaneous Parts ..................................................................84
80 Price Book 7
Effective May 4, 2019 • Rev. 05/19
K Series Cylindrical Grade 1 LOCKS
K-Series • Lever Functions
Key-In-Lever Locks
FALCON ANSI &
Function
K561 F84 Classroom Lock
Deadlocking latch bolt by levers. Outside lever is
locked by key in outside lever. Inside lever is always
free.
K571 Corridor Lock
Deadlocking latch bolt. Push Button Locking. Button
on the inside locks outside lever until unlocked
by key or by rotating inside lever. Closing the door
releases button. Inside lever always free. Key will
lock and unlock from the outside.
K581 F86 Storeroom Lock
Deadlocking latch bolt by lever inside or key outside.
Outside lever is always locked. Inside lever is always
free.
K12 Dummy Trim
Single trim - surface mounted right lever
ANSI A156.2, Series 4000 Grade 1
Key-In-Lever Locks
FALCON ANSI &
Function
K101 F75 Passage Latchset
Latch bolt by levers at all times.
K301 F76 Privacy Lock
Latch bolt by levers. Outside lever is locked
by push button in inside lever. Rotating inside
lever or closing door release push button and
frees outside lever. Inside lever is always free.
Emergency release in outside lever unlocks
door.
K501 F82 Entry Lock
Push Button Locking. Button on the inside
locks outside lever until unlocked by key or by
rotating inside lever. Inside lever always free.
Deadlocking latch bolt.
K511 F109 Entry/Office Lock
Deadlocking latch bolt by levers. Turn/push
button locking. Pushing and turning button
locks outside lever, requiring use of a key for
unlocking the door until button is manually
unlocked. Pushing button locks outside lever
until unlocked by key or by rotating inside
lever. Inside lever is always free.
81
Prices subject to change without notice
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Levers Complete Locks • K-Series
Grade 1 Medium Duty Cylindrical Locksets
ANSI-A156.2, SERIES 4000, Grade1
D (Dane) Q (Quantum)
Key-In-Lever
Function Description
Designs and Finishes
A D Q
626 613
Single Cylinder Functions
K501PD Entry
$274.00 $286.00
K511PD Entry/Office
K561PD Classroom
K571PD Dormitory/Corridor
K581PD Storeroom
Non-Keyed Functions
K101S Passage $225.00 $237.00
K301S Privacy 252.00 264.00
Dummy Trim
K12 Half Dummy $115.00 $121.00
K SeriesCylindricalGrade 1LOCKS
A (Avalon)
82
Prices subject to change without notice
Price Book 7
Effective May 4, 2019 • Rev. 05/19
K Series Cylindrical Grade 1 LOCKS
K-Series Levers • Cylinder Options
* Competitor keyways are furnished 0 bitted.
Not available Master keyed, except Schlage C. KD option is not available for locks containing 2 cylinders.
Notes: 5) Finishes for Falcon keyway cylinders are 613 and 626 only.
6) Falcon cylinders are furnished G keyway unless otherwise specified.
7) Restricted sections See page 141. See Restricted Keyway Policy for standard keyway and policy on use
of restricted keyway cylinders. Contact 877-671-7011 for availability.
Note: 8) Control keys are not furnished with locks and must be ordered separately. See page 151 for details
Notes: 1) Finishes: 613 and 626 only
2) Specify keyway
3) Cylinders are furnished G keyway, keyed differently unless otherwise specified.
4) Restricted sections add $10.80 to list price. See page 8 for list of standard keyways.
All other keyways are considered restricted. Contact 877-671-7011 for availability.
* Keying must be specified
** Locks are assessed one non-refundable handling charge (50-231F) per core.
Conventional Cylinder Options
Description Specify
Add to Lock Price
(per core)
5 pinned cylinder P Suffix
Example: K581P STD
6 pinned cylinder P6 Suffix
Example: K581P6 N/C
6 pinned Competitor keyway cylinders* P6 Suffix
Example: K581P6 (0 Bitted, KD, KA4 only) $11.50
Schlage C (6 pin only) CP6 Suffix
Example: K581CP6 (All other keying, not listed above) N/C
Small Format Interchangeable Core and Small Format Construction Core
Description Specify
Add to Lock Price
(per core)
Small format core * G Suffix
Example: K581GD
$45.00
Small format core (Best Style) * BB Suffix
Example: K581BB
Small format construction core ** H Suffix
Example: K581HD
Less Small format core B Suffix
Example: K581BD N/C
Small format disposable core BDC Suffix
Example: K581BDC N/C
K-Series Complete Conventional Cylinders
Part Number
Cylinder Mechanism For All Other Functions For K571 Price Each
6 Pin Falcon keyway cylinder Q330-396 Q330-310
$54.00 6 Pin Schlage C keyway cylinder Q330-391 Q330-306
6 Pin to 5 Pin Falcon G keyway cylinder Q330-397 Q330-311
For other cylinders, see pages 141-146.
83
Prices subject to change without notice
Price Book 7
Effective May 4, 2019 • Rev. 05/19
K SeriesCylindricalGrade 1LOCKS
Latch & Strike Options • K-Series
Note: 1) Specify finish when ordering.
Note: 1) Standard faceplate size is 2-1/4" x 1-1/8"
Latches with Locks
Backset Description
Specify
Add to Lock Price
Springlatch
101
Restoring
Springlatch
301
Deadlatch
501, 511,
561, 581
Restoring
Deadlatch
571
2-3/8" Square corner 30-267 30-271 30-301 30-386
N/C
Radius corner 30-269 30-273 30-275 30-388
2-3/4" Square corner 30-266 30-270 30-302 30-385
Radius corner 30-268 30-272 30-274 30-387
Latches as Parts Finishes: 613, 626
Backset Description
Specify
List Price
Springlatch
101
Restoring
Springlatch
301
Deadlatch
501, 511,
561, 581
Restoring
Deadlatch
571
2-3/8" Square corner Q630-267 Q630-271 Q630-301 Q630-386
$54.20
Radius corner Q630-269 Q630-273 Q630-275 Q630-388
2-3/4" Square corner Q630-266 Q630-270 Q630-302 Q630-385
Radius corner Q630-268 Q630-272 Q630-274 Q630-387
Strikes with Locks
Description Lip Length Specify Add to Lock Price
ANSI, 1-1/4" x 4-7/8" standard 1-3/8" 30-148
N/C
Square Corner, T-Strike 1-1/8" x 2-3/4" 1-3/8" 30-149
Radius Corner, Full Lip Strike 1-5/8" x 2-1/4" 1" 30-150
Square Corner, Full Lip Strike 1-5/8" x 2-1/4" 1" 30-151
Strikes as Parts Finishes: 613, 626
Description Lip Length Specify List Price
ANSI, 1-1/4" x 4-7/8" standard 1-3/8" Q330-148
$10.70
Square Corner, T-strike, 1-1/8" x 2-3/4" 1-3/8" Q330-149
Radius Corner, Full Lip Strike 1-5/8" x 2-1/4" 1” Q330-150
Square Corner, Full Lip Strike 1-5/8" x 2-1/4" 1” Q330-151
84
Prices subject to change without notice
Price Book 7
Effective May 4, 2019 • Rev. 05/19
K Series Cylindrical Grade 1 LOCKS
K-Series • Misc. Parts & Options
Locks Less Components
Description Specify
Deduct from
Lock Price
Less standard (conventional) cylinder L Suffix
Example: K581LD DAN $21.00
Less latch LLL Suffix
Example: K581PD6 DAN 626 LLL 30-148 16.50
Less strike LLL Suffix
Example: K581GD7 DAN 626 30-206 LLL 5.50
Screws
Part Number Description Finishes List Price
Q630-254 Screw Pack 613, 626 $5.60
Q330-399 Screw Pack — Dummy Trim – 4.00
Miscellaneous Parts
Part Number Description List Price
Q330-393 Conventional Falcon G Cylinder tailpiece (K501, 511, 581, 561)
$4.00
Q330-394 Conventional Falcon G Cylinder tailpiece (K571)
Q630-312 Conventional Schlage C cylinder tailpiece (K501, 511, 581, 561)
Q630-288 Conventional Schlage C cylinder tailpiece (K571)
Q630-289 SFIC Tailpiece (K501, 511, 581, 561)
Q330-392 SFIC Tailpiece (K571)
Q630-246 Inside Spring Cage Kit 55.30
Q630-279 2-1/4" x 1-1/8" Faceplate, deadlatch, round corner
6.10
Q630-278 2-1/4" x 1-1/8" Faceplate, deadlatch, square corner
Q630-277 2-1/4" x 1-1/8" Faceplate, springlatch, round corner
Q630-276 2-1/4" x 1-1/8" Faceplate, springlatch, square corner
85
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Prices subject to change without notice
D100-Series
Finish Codes and Descriptions
Code Description
605 (US3) Bright Brass
606 (US4) Satin Brass
613 (US10B) Oil Rubbed Bronze
625 (US26) Bright Chrome
626 (US26D) Satin Chrome
Standard Features - Furnished unless otherwise specified
Certification BHMA - ANSI A156.5, 2001, Grade 1 auxiliary lock, Available UL Listed for 3-Hour fire door
Deadbolt 1-1/8" x 2-1/4", Square corner faceplate, 1" housing diameter, 1" throw
Strike 1-1/8" x 2-3/4", lipless, with box
Cylinder 6-Pin, Solid brass, Keyed 5-Pin, Falcon G keyway, Keyed different (KD)
Door Range 1-3/8" - 1 7/8" standard cylinder and thumbturn only; 1-5/8" - 2-1/4" interchangeable core cylinder
Keys Two, Nickel silver cut keys per lock, Falcon G keyway
Reinforcement Metal dust box reinforcer with three - 3" screws
Trim Ring 1" Wrought brass or bronze, reinforced with security insert
Backset 2-3/8" and 2-3/4" adjustable
Introduction
D100 SeriesDeadboltGrade 1LOCKS
Product Identification
D 111 P F
Latch Suffix
F = UL Listed
Cylinder Suffix
B = Less SFIC
BDC = Disp. Const. Core
BB = With SFIC Core (Best)
G = With SFIC Core (Falcon)
H = With SFIC Keyed Const.
Core
L = Less 6-Pin Cylinder
P = 6-Pin Cylinder pinned
to 5 chambers
P6 = 6-Pin Cylinder pinned
to 6 chambers
P7 = 7-Pin Cylinder pinned
to 7 chambers
Function
See 81
Lock Series
SFIC = Small Format (Best® Style) Interchangeable Core
Table of Contents
Function Charts 87
Complete Lock Pricing 88
Options
Deadbolts ....................................................................................89
Strikes ...........................................................................................89
Small Format Interchangeable Cores ..................................90
Small Format Construction Cores ........................................90
Lock Less Components .............................................................91
Conventional Cylinder Options ............................................... 91
Parts
Trim ................................................................................................ 92
Deadbolts ....................................................................................92
Strikes ...........................................................................................93
Adapters .......................................................................................93
Screws ...........................................................................................94
Screw Packs ................................................................................94
86 Price Book 7
Effective May 4, 2019 • Rev. 05/19
Prices subject to change without notice
D141 / 241
D131 / 231
D111 / 211
D121 / 221
2 ³⁄₄
Mounting screws
Mounting screws
Faceplate
Anti-pry shield
UL rated
firecup
Mounting screws
Rose
Rose
Rose
Mounting screws
Mounting screws
Mounting
screws
Trim ring
Steel mounting plate
Dust box
Strike
Steel mounting
plate
Steel mounting
plate
Deadbolt
Trim ring
Cylinder
D100 Series
GRADE 1 DEADBOLT
D100 Series Deadbolt Grade 1 LOCKS
87
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Prices subject to change without notice
Functions • D100-Series
BHMA / ANSI A156.5, 2001, Grade 1
Bored Deadbolt Locks
FALCON ANSI
D111P E0171 Classroom Function
Deadbolt thrown or retracted by key from outside.
Inside turn will only retract bolt. Bolt automatically
deadlocks when fully thrown.
D121P E0161 Single Cylinder x Rose
Deadbolt thrown or retracted by key only. Blank
plate inside. Bolt automatically deadlocks when
fully thrown.
D131P E0141 Double Cylinder
Deadbolt thrown or retracted by key from either
side. Bolt automatically deadlocks when fully
thrown.
D141P E0151 Single Cylinder x Turn
Deadbolt thrown or retracted by key or by turn.
Bolt automatically deadlocks when fully thrown.
D151 Turn x Turn
Deadbolt thrown or retracted by turn unit from
either side. Application for shelters. Bolt
automatically deadlocks when fully thrown.
D100 SeriesDeadboltGrade 1LOCKS
88
Prices subject to change without notice
Price Book 7
Effective May 4, 2019 • Rev. 05/19
D100 Series • Levers and Parts
Outside Cylinder Trim Inside Cylinder Trim Rose and Turn
Notes: 1) Split finishes are priced at the highest finish price.
2) Keying options: See page 8
3) ‘F’ suffix must be added for UL product.
D-100 Series
Function Description
Designs and Finishes
626 605 606 613 625
Single Cylinder Functions
D111P Classroom Function $143.00 $149.00
D121P Single Cylinder x Blank Rose 126.00 132.00
D141P Single Cylinder x Turn
Double Cylinder Functions
CAUTION: Double cylinder locks on residences and any door in any structure which is used for egress are a life safety hazard in
times of emergency and their use is not recommended. Installation should be in accordance with existing codes only.
D131P Cylinder x Cylinder $163.00 $169.00
Non-Keyed Functions
D151 Turn x Turn $105.00 $111.00
D100 Series Deadbolt Grade 1 LOCKS
89
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Prices subject to change without notice
Shaded items are standard components and are furnished with locks unless otherwise specified.
Square Corner 1/4" Radius Drive-In
10-094 10-087 10-095 10-092
Deadbolts with Locks
Backset Description HSG Dia Specify
Add to
Lock Price
2-3/8" or
2-3/4"
Square corner, 1-1/8" x 2-1/4", standard
1"
30-256
N/C
Square corner, 1" x 2-1/4" 30-176
1/4" Radius round corner, 1" x 2-1/4" 30-178
Circular, Drive-In bolt, 626 only 30-257
For UL Listed Locks
2-3/8" or
2-3/4" UL
Square corner, 1-1/8" x 2-1/4", standard
1"
30-174
N/CSquare corner, 1" x 2-1/4" 30-172
Circular, Drive-In bolt, 626 only 30-259
Strikes with Locks
Description Lip Length Specify Add to Lock Price
Drive-In thimble strike, 1-3/16" dia. 1" 10-064 N/C
ANSI, 1-1/4" x 4-7/8", with box 1-1/8" 10-087 $8.60
Full Lip, 1/4" radius corner, 1-5/8" x 2-1/4", no box 1-5/16" 10-092
N/C
Square Corner with metal dust box, 1-1/8" x 2-3/4", standard
–
10-094
Full Lip, square corner, 1-5/8" x 2-1/4", no box 10-095
1-1/8" square corner and strike 5075
Options • D100 Series
D100 SeriesDeadboltGrade 1LOCKS
90 Price Book 7
Effective May 4, 2019 • Rev. 05/19
Prices subject to change without notice
Small Format
Interchangeable Core
* Keying must be specified
** Locks are assessed one non-refundable handling charge (50-231F) per core.
Notes: 1) Split finishes are priced at the highest finish price.
2) Key section must be specified and applicable charges for restricted sections will be applied. See page 141.
3) Control keys are not furnished with locks and must be ordered separately. See page 151 for details
Small Format Interchangeable Core and Small Format Construction Core
Description Specify
Add to Lock Price
(per core)
Small format core * G Suffix
Example: D111GD $45.00
Small format core (Best Style) * BB Suffix
Example: D111BB
Small format construction core ** H Suffix
Example: D111HD 45.00
Less Small format core B Suffix
Example: D111BD N/C
Small format disposable core BDC Suffix
Example: D111BDC N/C
D100 Series • Options
D100 Series Deadbolt Grade 1 LOCKS
91
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Prices subject to change without notice
Conventional Cylinders and Lock Less Components Options • D100 Series
* Specify specific competitor keyway on order. Competitor keyways are furnished 0 bitted, unless otherwise specified.
Not available Master keyed, except Schlage C. KD option is not available for locks containing 2 cylinders.
Notes: 1) Finishes: 606 and 626 only
2) Specify keyway
3) Cylinders are furnished G keyway, keyed differently unless otherwise specified.
4) Restricted sections add $10.80 to list price. See page 8 for list of standard keyways.
All other keyways are considered restricted. Contact 877-671-7011 for availability.
Lock Less Components
Description Specify
Deduct from
Lock Price
Less deadbolt LLL for latch
Example: D211P 605 30-171 LLL $11.00
Less strike LLL for strike
Example: D211L 3.50
Less conventional cylinder L suffix
Example: D211L 19.20
Less conventional cylinder D131 L suffix
Example: D131L 36.20
Conventional Cylinder Options
Description Specify
Add to Lock Price
(per core)
5 pinned cylinder P Suffix
Example: D111P STD
6 pinned cylinder P6 Suffix
Example: D111P6 N/C
7 pinned cylinder
(Not available on D131)
P7 Suffix
Example: D111P7 $11.50
6 pinned Competitor keyway cylinders* P6 Suffix
Example: D111P6 (0 Bitted, KD, KA4 only) N/C
D100-Series Complete Conventional Cylinders
Cylinder Mechanism Part Number Price Each
5 Pin Cylinder - D111, D141 Q500-064
$54.00
5 Pin Cylinder - D121 Q500-066
5 Pin Cylinder - D131 Q500-070
6 Pin Cylinder - D111, D141 Q500-021
6 Pin Cylinder - D121 Q500-058
6 Pin Cylinder - D131 Q500-054
7 Pin Cylinder - D111, D141 Q500-046 69.00
7 Pin Cylinder - D121 Q500-059
D100 SeriesDeadboltGrade 1LOCKS
92 Price Book 7
Effective May 4, 2019 • Rev. 05/19
Prices subject to change without notice
D100 Series • Parts
Rose and Turn Mounting Plate Rose
Note: 1) For trim rings and inserts see Cylinders: D100
Square Corner 1/4" Radius Drive-In
Trim
Part Number Specify Finish Description Price Each
B302-041 • Rose and Turn $44.50
B302-045 • Rose and Turn (D111) 44.50
12-626 • Blank Rose (D121) 25.30
B600-018 • Mounting plate for rose and rose & turn 10.30
Deadbolts
Part Number Specify Finish Housing Diameter Description Price Each
Q330-256 •
2-3/8" or 2- 3/4"
Universal
Square corner, 1-1/8" x 2-1/4" faceplate
$16.20
Q330-176 • Square corner, 1" x 2-1/4" faceplate
Q330-178 • 1/4" radius corner, 1" x 2-1/4" faceplate
Q330-257 626 1" circular drive-in, 626 only
D100 Series Deadbolt Grade 1 LOCKS
93
Prices subject to change without notice
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Parts • D100 Series
38-031 B520-649 B520-650
10-064 10-087 10-092 10-094 10-095
Strikes
Part Number Specify
Finish Description Lip Length Price
Each
10-064 • Drive-In, thimble strike, 1-3/16" deep - $16.70
10-087 • ANSI, 1-1/4" x 4-7/8, with box 1-1/8" 22.90
10-094 • Square corner with metal dust box, 1-1/8" x 2-3/4" - 12.20
10-092 • Full lip, 1/4" radius corner, 1-5/8" x 2-1/4", no box
1-5/16" 7.90
10-095 • Full lip, square corner, 1-5/8" x 2-1/4", no box 8.10
J250-028 2" strike mounting screws 2.00
5075 • Security Strike -9.60
Adapters
Part Number Specify
Finish Description Price Each
(per finish)
605 606
613 625 626
38-031 • 2-1/2" diameter adapter ring for 2-1/8" door prep, for under cylinder $19.00
B520-649 • Trim ring w/shield for D131/D141 23.50
B520-650 • Trim ring w/shield for IC functions 23.50
36-071 • 1-3/8” IC Core thin door shim kit, contains 36-066 & 36-068 14.60
Strikes , Adapters
D100 SeriesDeadboltGrade 1LOCKS
94 Price Book 7
Effective May 4, 2019 • Rev. 05/19
Prices subject to change without notice
D100 Series • Parts
Screw Packs
Part
Number
Specify
Finish Door Thickness Contents Price
Each
Keyed, Single Conventional Cylinder
61-500 • 1 3/8" – 1 3/4" (1) B600-018
(2) B600-100
(2) B600-066
(4) C603-897
$14.60
61-501 • over 1 3/4" – 2 1/4" (1) B600-018
(2) B600-101
(2) B600-066
(4) C603-897
14.60
Keyed, Single SFIC Cylinder
61-500 • 1 3/8" – 2" (1) B600-018
(2) B600-100
(2) B600-066
(4) C603-897
$14.60
Keyed, Double Conventional Cylinder
61-502 • 1 3/8" – 1 3/4" (2) B600-047
(4) C603-897 $11.10
61-503 • over 1 3/4" – 2 1/4" (2) B600-078
(4) C603-897 11.10
Keyed, Double SFIC Cylinder
61-507 • 1 3/8" – 2" (2) B600-053
(4) C603-897 $11.10
Screws
Part
Number
Specify
Finish
Description Application Price Each
(Order in
multiples
of 100)Size Type Use Door Thickness
Keyed, Single Conventional Cylinder
B600-100 1/4"-28 x 1-15/16" POH mach. Mounting 1-3/8" - 1-3/4"
$2.40 B600-101 1/4"-28 x 2.425" POH mach. Mounting over 1-3/4"
B600-066 • 6-32 x 1/4" PH mach. Turn -
B520-298 10-32 x 3/8" PH mach. Anti-pry shield - 0.78
Keyed, Single SFIC Cylinder
B600-100 1/4"-28 x 1-15/16" POH mach. Mounting 1-3/8" - 2-1/4" 2.40
B600-066 • 6-32 x 1/4" PH mach. Turn -
Keyed, Double Conventional Cylinder
B600-047 1/4"-28 x 3-13/16" PH mach. Mounting 1-3/8" - 1-3/4" 2.40
B600-078 1/4"-28 x 3-29/64" PH mach. Mounting over 1-3/4"
B520-298 10-32 x 3/8" PH mach. Anti-pry shield - 0.78
Keyed, Double SFIC Cylinder
B600-053 1/4"-28 x 3-61/64" PH mach. Mounting 1-3/4" - 2-1/4" 2.40
B520-298 10-32 x 3/8" PH mach. Anti-pry shield -0.78
All Functions
C603-897 • #8 x 3/4" PFH combo Deadbolt & strike - 0.90
J250-028 #8 x 2" PFH wood 2" strike screw -2.00
R525-256 #12 x 3" PFH wood 3" metal dust box -
Screws
D100 Series Deadbolt Grade 1 LOCKS
95
Prices subject to change without notice
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Introduction B-Series
Finish Codes and Descriptions
Code Description
605 (US3) Bright Brass
606 (US4) Satin Brass
613 (US10B) Oil Rubbed Bronze
625 (US26) Bright Chrome
626 (US26D) Satin Chrome
Standard Features - Furnished unless otherwise specified
Certification ANSI A156.2, Series 4000, Grade 2, UL Listed for 3-Hour fire door
Latch 1-1/8" x 2-1/4", Square corner faceplate, 1" housing diameter, 1/2" throw, 2-3/4" backset
Strike 1-1/4" x 4-7/8", ANSI, Square corner, no box
Cylinder 6-Pin, Solid brass, Keyed 5-Pin, Falcon G keyway, Keyed different (KD)
Door Range 1-3/8" - 2" standard (exceptions for communicating locks - see pg 98)
Keys Two, Nickel silver cut keys per lock, Falcon G keyway
B SeriesCylindricalGrade 2LOCKS
Product Identification
B 501 P D
Latch Suffix
D = Deadlatch
S = Springlatch
Cylinder Suffix
B = Less SFIC
BDC = Disp. Const. Core
BB = With SFIC Core (Best)
G = With SFIC Core (Falcon)
H = With SFIC Keyed Const.
Core
L = Less 6-Pin Cylinder
P = 6-Pin Cylinder pinned
to 5 chambers
P6 = 6-Pin Cylinder pinned
to 6 chambers
CP6 = 6-Pin Cylinder
Schlage C
Function
See 97
Lock Series
SFIC = Small Format (Best® Style) Interchangeable Core
Table of Contents
Functions 97
Complete Lock Pricing 98
Options
Conventional Clyinder Options ..............................................99
Small Format Interchangeable Cores .................................. 99
Small Format Construction Cores ........................................99
Latches .......................................................................................100
Strikes .........................................................................................100
Lock Less Components ........................................................... 101
Tactile Warnging Strip (not available in 613)................... 101
Parts
Levers ........................................................................................... 101
Roses ............................................................................................ 101
Chassis Assemblies .................................................................. 101
Screws ......................................................................................... 102
Misc. Parts .................................................................................. 102
96 Price Book 7
Effective May 4, 2019 • Rev. 05/19
Prices subject to change without notice
B Series
GRADE 2 CYLINDRICAL LOCK
Outside lever
Cylinder
Plastic insert
Plastic insert
Spring cage
Lock chassis
Inner mounting plate
Inside lever
Outside rose
Inside rose
Deadlatch
Mounting screw
B Series Cylindrical Grade 2 LOCKS
97
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Prices subject to change without notice
ANSI A156.2 Series 4000 Grade 2
Key-In-Lever Locks Key-In-Lever Locks
FALCON ANSI FALCON ANSI
B101 F75 Passage/Closet Latchset
Latch bolt by levers at all times.
B561 F84 Classroom Lock
Deadlocking latch bolt by levers. Outside lever
is locked by key in outside lever. Inside lever is
always unlocked for immediate egress.
B161 F111 Communicating Passage Lock
Deadlocking latch bolt by inside lever.
Non-removable blank plate outside.
B581 F86 Store Room
Deadlocking latch bolt by lever inside or key
outside. Outside lever is always locked. Inside
lever is always unlocked for immediate egress.
B301 F76 Privacy/Bedroom/Bath Lock
Latch bolt by levers. Outside lever
locked by push button in inside lever.
Rotating inside lever or closing door
releases push button. Emergency
release in outside lever unlocks door.
B611 F90 Dormitory/Corridor Lock
Deadlocking latch bolt by levers except when
locked by push button on inside lever. Key in
outside lever locks or unlocks outside lever
and releases button. Closing door releases push
button. Inside lever is always free.
B341 F112 Communicating Store Room Lock
Deadlocking latch bolt by inside lever
except when locked by key.
Non-removable blank plate on opposite
side of lever (11/16" projection).
B12 Dummy Trim
Single Trim-surface mounted rigid lever.
B501 F82 Entry Lock
Push button locking. Button on inside
locks outside lever until unlocked by key
or by rotating inside lever. Inside lever
always free. Deadlocking latch bolt.
B511 F109 Entry/Office Lock
Turn/push button locking. Pushing and
turning button locks outside lever
requiring use of key until button is
manually unlocked. Push button
locking. Pushing button locks outside
lever until unlocked by key or by
rotating inside lever. Inside lever always
free. Deadlocking latch bolt.
Functions • B-Series
Grade 2 Standard Duty Cylindrical Locksets
ANSI-A156.2, SERIES 4000, GRADE 2
B SeriesCylindricalGrade 2LOCKS
98
Prices subject to change without notice
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Grade 2 Standard Duty Cylindrical Locksets
ANSI-A156.2, SERIES 4000, GRADE 2
B-Series • Complete Locks
D (Dane) Q (Quantum)
Key-In-Lever
Designs and Finishes
D Q
Function Description 626 605 606 613 625
Single Cylinder Functions
B341PD* Connecting/Exit
$209.00 $221.00
B501PD Entry
B511PD Entry/Office
B561PD Classroom
B581PD Storeroom
B611PD Dormitory/Corridor 236.00 248.00
Non-Keyed Functions
B101S Passage $150.00 $162.00
B161D* Communicating Latch
B301S Privacy 174.00 186.00
Dummy Trim
B12 Half Dummy $68.00 $74.00
* The B161 and B341 need to be specified as shown for correct door ranges: 138 for ( 1-3/8"- 1-5/8") or 134 for (>1-5/8"-2")
B Series Cylindrical Grade 2 LOCKS
99
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Prices subject to change without notice
Cylinder Options • B-Series
* Specify specific competitor keyway on order. Competitor keyways are furnished 0 bitted, unless otherwise specified.
Not available Master keyed, except Schlage C. KD option is not available for locks containing 2 cylinders.
Notes: 1) Finishes: 606 and 626 only.
2) Specify keyway.
3) Cylinders are furnished G keyway, keyed differently unless otherwise specified.
4) Restricted sections add $10.80 to list price. See page 8 for list of standard keyways.
All other keyways are considered restricted. Contact 877-671-7011 for availability.
*Keying must be specified.
** Locks are assessed one non-refundable handling charge (50-231F) per core.
Note: 5) Control keys are not furnished with locks and must be ordered separately. See page 151 for details
Conventional Cylinder Options
Description Specify Add to Lock Price
(per core)
5 pinned cylinder P Suffix
Example: B581P STD
6 pinned cylinder P6 Suffix
Example: B581P6
N/C6 pinned Competitor keyway cylinders* P6 Suffix
Example: B581P6 (0 Bitted, KD, KA4 only)
Schlage C (6 pin only) CP6 Suffix
Example: B581CP6 (All other keying, not listed above)
Small Format Interchangeable Core and Small Format Construction Core
Description Specify Add to Lock Price
(per core)
Small format core * G Suffix
Example: B581GD $45.00
Small format core (Best Style) * BB Suffix
Example: B581BB
Small format construction core ** H Suffix
Example: B581HD 45.00
Less Small format core B Suffix
Example: B581BD N/C
Small format disposable core BDC Suffix
Example: B581BDC N/C
B-Series Complete Conventional Cylinders
Cylinder Mechanism Part Number Price
Each
5 Pin Cylinder A23155-02
$54.00
5 Pin Cylinder - B611 A23151-06
6 Pin Cylinder A23165-02
6 Pin Cylinder - B611 A23161-06
B SeriesCylindricalGrade 2LOCKS
100
Prices subject to change without notice
Price Book 7
Effective May 4, 2019 • Rev. 05/19
B-Series • Latch and Strike Options
Shaded items are standard components and are furnished with locks unless otherwise specified.
Latches with Locks
Backset Description
Specify
Add to Lock Price
Springlatch/Deadlatch
301/611
2-3/4"
Square corner, 1-1/8" x 2-1/4", standard 57435 57635
N/CSquare corner, 1" x 2-1/4" 57430 57630
1/4" Radius round corner, 1" x 2-1/4" 57431 57631
2-3/8" **
Square corner, 1" x 2-1/4" 57420 57620
N/CSquare corner, 1-1/8" 57425 57625
1/4" Radius round corner, 1" x 2-1/4" 57421 57621
5" Backset extension link A31727-005-00 * $38.60
Strikes with Locks
Description Lip Length Specify Add to Lock Price
ANSI, 1-1/4" x 4-7/8" standard 1-3/16” 5164 N/C
Square Corner, full lip 1-5/8" x 2-1/4" 1" 01-049 N/C
1/4" Radius round corner, full lip 1-5/8" x 2-1/4" 1" 01-048 N/C
Square Corner, T-strike, 1-1/8" x 2-3/4" 1-5/16" 01-046 N/C
ANSI dust box 1" deep, steel - 005099-000-30 N/C
ANSI, 1-1/4" x 4-7/8" 7/8" 5161 N/C
Strikes sold separate
Finishes: 605, 606, 613, 626, 630 (ANSI only)
Description Lip Length Specify List Price
Square Corner, T-strike, 1-1/8" x 2-3/4" 1-1/8" Q001-046
1/4" Radius round corner, full lip 1-5/8" x 2-1/4" 1” Q001-048 $4.30
Square corner, full lip 1-5/8" x 2-1/4" Q001-049
ANSI, 1-1/4" x 4-7/8" standard 1-3/16” 005164-000 13.80
ANSI dust box 1" deep, steel - 005099-000-30 3.20
ANSI, 1-1/4" x 4-7/8" 7/8" 005161-000 23.20
Latches sold separate
Finishes: 605, 613, 630
Latch Face Backset & Price
2-3/8" 2-3/4" Price
1" Spring Latch (101) A57420-000 A57430-000
$28.30
1" Spring Latch (301) A57620-000 A57630-000
1" Spring Latch - 1⁄4" Rad. (101) A57421-000 A57431-000
1" Spring Latch - 1⁄4" Rad. (301) A57621-000 A57631-000
1" Deadlatch A57420-00D A57430-00D
1" Deadlatch (611) A57620-00D A57630-00D
1" Deadlatch - 1⁄4" Rad. A57421-00D A57431-00D
1" Deadlatch - 1⁄4" Rad. (611) A57621-00D A57631-00D
1-1⁄8" Spring Latch (101) A57425-000 A57435-000
1-1⁄8" Spring Latch (301) A57625-000 A57635-000
1-1⁄8" Deadlatch A57425-00D A57435-00D
1-1⁄8" Deadlatch (611) A57625-00D A57635-00D
* Backset extension link A31727-005-00 must be used with 2-3/8" backset latches
** 2-3/8" backset is furnished as a 1" faceplate standard.
B Series Cylindrical Grade 2 LOCKS
101
Prices subject to change without notice
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Trim and Chassis Options • B-Series
Notes: 1) Outside lever only has abrasive strip adhered to the back surface of the lever.
2) B581 Storeroom function locks should be used on doors requiring tactile warning of danger.
3) Abrasive strip not available in 613 finish.
Note: 4) Chassis provided with trim finish on B341 and B611.
Lock Less Components
Description Specify Deduct from
Lock Price
Less standard cylinder L suffix
Example: B581LD DAN $54.00
Less latch LLL for latch
Example: B581PD DAN 626 LLL 5164 13.30
Less strike LLL for strike
Example: B581PD DAN 626 57435 LLL 10.10
Tactile Warning (abrasive strip)
Description Specify Add to
Lock Price
Abrasive Strip Preface the design code with 6
Example: 6DA for DAN $48.70
Levers
Part Number Description
List Price
605, 606, 613,
625, 626
A31750-000 Lever, Dane closed
$41.80
A31751-000 Lever, Quantum closed
A31750-001 Lever, Dane open
A31751-001 Lever, Quantum open
031700-002 Lever, Dane IC
031701-002 Lever, Quantum IC
B Series Chassis Assemblies
Part Number
Description Price
Conventional
Cylinder IC Core
A31706-000-00 B101 Chassis $121.00
A31707-000-00 B161 Chassis – 1-5/8" – 2" Door Thickness
A31707-002-00 B161 Chassis – 1-3/8" – 1-5/8" Door Thickness 121.00
A31709-000-00 A31709-001-00 B301/501 Chassis 147.00
A31714-000-00 A31714-001-00 B511 Chassis
A31715-000-00 A31715-001-00 B561 Chassis 197.00
A31716-000-00 A31716-001-00 B581 Chassis
147.00A31708-000 A31708-001 B341 Chassis – >1-5/8" – 2" Door Thickness
A31708-002 A31708-003 B341 Chassis – 1-3/8" – 1-5/8" Door Thickness
A31739-000 A31739-001 B611 Chassis 220.00
Roses
Part Number Description
List Price
605, 606, 613,
625, 626
031702-000 Rose, Outer
$16.80 031703-000 Rose, Inner
A31764-000 Rose, Blank Insert and Post
B SeriesCylindricalGrade 2LOCKS
102
Prices subject to change without notice
Price Book 7
Effective May 4, 2019 • Rev. 05/19
B-Series • Parts
Miscellaneous Parts
Part Number Description List Price
031705-000-30 Inside Rose Liner $2.00
031718-000 Push button cap 2.40
031719-000 Turn button cap 2.70
031741-000-50 Lever insert 0.56
Screws
Part Number Description Finishes Size List Price
021164-016 ANSI strike screws 606, 613, 626, 630 12-24 x 1" combo $0.52
024416-012 Latch and strike screws 606, 613, 626, 630 8-32 x 3/4" combo 0.32
A31767-000 Screw pack
2-Strike screws, 2- Latch screws, 2- Mounting
screws, 2- ANSI Strike screws, and 1- Pin Wrench
605, 613, 626 4.90
B Series Cylindrical Grade 2 LOCKS
103
Prices subject to change without notice
Price Book 7
Effective May 4, 2019 • Rev. 05/19
W-Series
Introduction
Finish Codes and Descriptions
Code Description
605 (US3) Bright Brass
606* (US4) Satin Brass
613 (US10B) Oil Rubbed Bronze
619 (US15) Satin Nickel
622 Matte Black
625 (US26) Bright Chrome
626 (US26D) Satin Chrome
643E (US11) Aged Bronze
*Not available on small rose
Standard Features - Furnished unless otherwise specied
Certication ANSI A156.2, Series 4000, Grade 2, UL Listed for 3-Hour re door
Latch 1-1/8" x 2-1/4", Square corner faceplate, 1" housing diameter, 1/2" throw, 2-3/4" backset
Strike 1-1/4" x 4-7/8", ANSI, Square corner, no box
Cylinder 6-Pin, Solid brass, keyed 5-pin, Falcon G keyway, Keyed different (KD)
Door Range 1-3/8" - 1-3/4" standard
Keys Two, Nickel silver cut keys per lock, Falcon G keyway
W SeriesCylindricalGrade 2LOCKS
Product Identification
W 501 P D
Latch Suffix
D = Deadlatch
S = Springlatch
Cylinder Suffix
B = Less SFIC
BB = With SFIC Core (Best)
BDC = Disp. Const. Core
G = With SFIC Core (Falcon)
H = With SFIC Keyed Const.
Core
L = Less 6-Pin Cylinder
P = 6-Pin Cylinder pinned
to 5 chambers
P6 = 6-Pin Cylinder pinned
to 6 chambers
CP6 = 6-Pin Cylinder
Schlage C
Function
See 105
Lock Series
SFIC = Small Format (Best® Style) Interchangeable Core
Table of Contents
Function Charts 105
Levers .......................................................................................... 105
Knobs ..........................................................................................106
Complete Lock Pricing
Levers/Knobs .............................................................................107
Small Rose Levers/Knobs ..................................................... 108
Options
Conventional Cylinder Options ............................................ 109
Complete Conventional Cylinders ......................................109
Interchageable Core & Const. Core ..................................... 109
Latches ........................................................................................ 110
Strikes .......................................................................................... 110
Lock Less Components .............................................................111
Tactile Warning Strip .................................................................111
Scews .............................................................................................111
Misc. Parts .....................................................................................111
104 Price Book 7
Effective May 4, 2019 • Rev. 05/19
Prices subject to change without notice
W Series
GRADE 2 CYLINDRICAL LOCK
Outside lever
Cylinder
Outside mounting plate - lever
Inside mounting plate - lever
Mounting screws
Plastic insert
Plastic insert
Cup
Deadlatch
Lock chassis
Strike
Inside rose
Inside lever
Outside spring
cage with rose
W Series Cylindrical Grade 2 LOCKS
105
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Prices subject to change without notice
Lever Functions • W-Series
Key-In-Lever Locks
FALCON ANSI &
Function
W561 F84 Classroom Lock
Deadlocking latch bolt by levers. Outside lever is
locked by key in outside lever. Inside lever is always
free.
W571*Corridor Lock
Deadlocking latch bolt. Push Button Locking. Button
on the inside locks outside lever until unlocked
by key or by rotating inside lever. Closing the door
releases button. Inside lever always free.
NEW FUNCTION NOTE: THIS LOCK WILL UNLOCK
WHEN THE DOOR IS CLOSED. IF YOU WANT YOUR
DOOR TO REMAIN LOCKED WHEN IT CLOSES,
PLEASE PURCHASE THE 501 FUNCTION.
W581 F86 Storeroom Lock
Deadlocking latch bolt by lever inside or key outside.
Outside lever is always locked. Inside lever is always
free.
W711*Apartment Entrance Lock
Deadlocking latch bolt by levers. Turn/push button
locking. Pushing and turning button locks outside
lever, requiring use of a key for unlocking the door
until button is manually unlocked. Pushing button
locks outside lever until unlocked by key, by rotating
inside lever, or by closing door. Inside lever is always
free.
W12/W18*Dummy Trim
Single or double available.
Single (W12)
Double (W18)
ANSI A156.2, Series 4000 Grade 2
Key-In-Lever Locks
FALCON ANSI &
Function
W101 F75 Passage Latchset
Latch bolt by levers at all times.
W161 F111 Communicating/Exit Latch
Deadlocking latch bolt by inside lever.
Non-removable blank plate outside.
W201* F77 Patio Lock
Deadlocking latch bolt by levers. Outside lever
is locked by push button from inside. Rotating
inside lever or closing door releases button
and unlocks outside lever.
W301 F76 Privacy Lock
Latch bolt by levers. Outside lever is locked
by push button in inside lever. Rotating inside
lever or closing door release push button and
frees outside lever. Inside lever is always free.
Emergency release in outside lever unlocks
door.
W501*F82 Entry Lock
Push Button Locking. Button on the inside
locks outside lever until unlocked by key or by
rotating inside lever. Inside lever always free.
Deadlocking latch bolt.
FUNCTION CHANGE NOTE: THIS LOCK WILL
STAY LOCKED WHEN THE DOOR IS CLOSED.
IF YOU WANT YOUR DOOR TO UNLOCK WHEN
IT CLOSES, PLEASE PURCHASE THE 571
FUNCTION.
W511 F109 Entry/Office Lock
Deadlocking latch bolt by levers. Turn/push
button locking. Pushing and turning button
locks outside lever, requiring use of a key for
unlocking the door until button is manually
unlocked. Pushing button locks outside lever
until unlocked by key or by rotating inside
lever. Inside lever is always free.
* Functions are not available for small rose option
W SeriesCylindricalGrade 2LOCKS
106
Prices subject to change without notice
Price Book 7
Effective May 4, 2019 • Rev. 05/19
W-Series • Knob Functions
Key-In-Knob Locks
FALCON ANSI &
Function
W561 F84 Classroom Lock
Deadlocking latch bolt by knobs. Outside knob is
locked by key in outside knob. Inside knob is always
free.
W571 Corridor Lock
Deadlocking latch bolt. Push Button Locking. Button
on the inside locks outside knob until unlocked
by key or by rotating inside knob. Closing the door
releases button. Inside knob always free.
NEW FUNCTION NOTE: THIS LOCK WILL UNLOCK
WHEN THE DOOR IS CLOSED. IF YOU WANT YOUR
DOOR TO REMAIN LOCKED WHEN IT CLOSES,
PLEASE PURCHASE THE 501 FUNCTION.
W581 F86 Storeroom Lock
Deadlocking latch bolt by knob inside or key outside.
Outside knob is always locked. Inside knob is always
free.
W711 Apartment Entrance Lock
Deadlocking latch bolt by knobs. Turn/push button
locking. Pushing and turning button locks outside
knob, requiring use of a key for unlocking the door
until button is manually unlocked. Pushing button
locks outside knob until unlocked by key, by rotating
inside knob, or by closing door. Inside knob is always
free.
W12 Dummy Trim
Single Trim rigid knob.
ANSI A156.2, Series 4000 Grade 2
Key-In-Knob Locks
FALCON ANSI &
Function
W101 F75 Passage Latchset
Latch bolt by knob at all times.
W301 F76 Privacy Lock
Latch bolt by knobs. Outside knob is locked
by push button in inside lever. Rotating inside
knob or closing door release push button and
frees outside knob. Inside knob is always free.
Emergency release in outside knob unlocks
door.
W501 F82 Entry Lock
Push Button Locking. Button on the inside
locks outside knob until unlocked by key or by
rotating inside knob. Inside knob always free.
Deadlocking latch bolt.
FUNCTION CHANGE NOTE: THIS LOCK WILL
STAY LOCKED WHEN THE DOOR IS CLOSED.
IF YOU WANT YOUR DOOR TO UNLOCK WHEN
IT CLOSES, PLEASE PURCHASE THE 571
FUNCTION.
W511 F109 Entry/Office Lock
Deadlocking latch bolt by knobs. Turn/push
button locking. Pushing and turning button
locks outside knob, requiring use of a key for
unlocking the door until button is manually
unlocked. Pushing button locks outside knob
until unlocked by key or by rotating inside
lever. Inside knob is always free.
W Series Cylindrical Grade 2 LOCKS
107
Prices subject to change without notice
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Levers/Knobs Complete Locks • W-Series
Grade 2 Medium Duty Cylindrical Locksets
ANSI-A156.2, SERIES 4000, Grade 2
D (Dane) Q (Quantum) AVA (Avalon) LAT (Latitude)
BRW (Broadway) BRK (Boardwalk) LON (Longitude)
Key-In-Lever 3-3/8" Rose
Function Description
Designs and Finishes
AVA D Q LAT LON BRW BRK AVA D Q LAT LON BRW BRK
626 643E 605 606 613 619 622 625
Single Cylinder Functions
W501PD Entry
$114.00 $126.00
W511PD Entry/Office
W561PD Classroom
W571PD Dormitory/Corridor
W581PD Storeroom
W711PD Apartment Entry
Non-Keyed Functions
W101S Passage $104.00 $116.00
W161D Communicating/Exit
105.00 117.00 W201D Patio
W301S Privacy
Dummy Trim
W12 Half Dummy $61.00 $67.00
W18 Two Sided Dummy 121.00 133.00
ELI (Elite) HAN (Hana)
Key-In-Knob
Function Description
Designs and Finishes
E H
626 605 606 613 625
Single Cylinder Functions
W511PD Entry/Office
$66.00 $78.00
W561PD Classroom
W571PD Corridor
W581PD Storeroom
W711PD Apartment Entry
Non-Keyed Functions
W101S Passage $54.00 $66.00
W301S Privacy 55.00 67.00
Dummy Trim
W12 Half Dummy $40.00 $46.00
Note: 2) Not available with a small rose. Small rose option is for levers only.
Note: 1) New Finishes (643E, 619, 622) & New Levers (AVA, LAT, LON, BRW, BRK) are not available on W18 function.
W SeriesCylindricalGrade 2LOCKS
108
Prices subject to change without notice
Price Book 7
Effective May 4, 2019 • Rev. 05/19
W-Series Small Rose • Levers Complete Locks
SRD (Dane)
SRLO (Longitude)
SRQ (Quantum)
SRBR (Broadway)
SRA (Avalon)
SRBO (Boardwalk)
SRLA (Latitude)
Small Rose 2-9/16" (65mm)
Function Description
Designs and Finishes
SRA, SRD, SRQ, SRLA, SRLO, SRBR, SRBO
626 643E 605 613 619 622 625
Single Cylinder Functions
W511 Entry/Office
$137.00 $149.00 W561 Classroom
W581 Storeroom
Non-Keyed Functions
W101 Passage $112.00 $124.00
W161 Communicating/Exit 114.00 126.00
W301 Privacy
Dummy Trim
W12 Single Dummy $65.00 $71.00
How to Order the Small Rose Option
Small Rose 2-9/16" (65mm)
Function
W511
Cylinder
PD
Trim
SRD
Finish
626
W Series Cylindrical Grade 2 LOCKS
109
Prices subject to change without notice
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Cylinder Options • W-Series Levers
* Competitor keyways are furnished 0 bitted.
Not available Master keyed, except Schlage C. KD option is not available for locks containing 2 cylinders.
Notes: 6) Finishes for Falcon keyway cylinders are 606, 622, & 626 only.
7) Falcon cylinders are furnished G keyway unless otherwise specified.
8) Restricted sections See page 141. See Restricted Keyway Policy for standard keyway and policy on use
of restricted keyway cylinders. Contact 877-671-7011 for availability.
Note: 9) Control keys are not furnished with locks and must be ordered separately. See page 151 for details.
10) 622 Finish is available only on SFIC (G) in C & G Keyways.
Notes: 1) Finishes: 606, 622, & 626 only.
2) Specify keyway.
3) Cylinders are furnished G keyway, keyed differently unless otherwise specified.
4) Restricted sections add $10.80 to list price. See page 8 for list of standard keyways.
All other keyways are considered restricted. Contact 877-671-7011 for availability.
5) 622 Finish is available only on Allegion cylinders (P, P6, & P7) in C & G Keyways.
* Keying must be specified
** Locks are assessed one non-refundable handling charge (50-231F) per core.
Conventional Cylinder Options - both small and regular rose sizes
Description Specify
Add to Lock Price
(per core)
5 pinned cylinder P Suffix
Example: W581P STD
6 pinned cylinder P6 Suffix
Example: W581P6 N/C
6 pinned Competitor keyway cylinders* P6 Suffix
Example: W581P6 (0 Bitted, KD, KA4 only) $6.70
Schlage C (6 pin only) CP6 Suffix
Example: W581CP6 (All other keying, not listed above) N/C
Small Format Interchangeable Core and Small Format Construction Core
Description Specify
Add to Lock Price
(per core)
Small format core * G Suffix
Example: W581GD $45.00
Small format core (Best Style) * BB Suffix
Example: W581BB
Small format construction core ** H Suffix
Example: W581HD 45.00
Less Small format core B Suffix
Example: W581BD N/C
Small format disposable core BDC Suffix
Example: W581BDC N/C
W-Series Complete Conventional Cylinders
Part Number
Cylinder Mechanism For All Other Functions Price Each
6 Pin Falcon keyway cylinder Q330-154
6 Pin Schlage C keyway cylinder Q330-152 $54.00
For other cylinders, see pages 141-146.
W SeriesCylindricalGrade 2LOCKS
110
Prices subject to change without notice
Price Book 7
Effective May 4, 2019 • Rev. 05/19
W-Series • Latch & Strike Options
Shaded items are standard components and are furnished with locks unless otherwise specified.
Note: 1) Specify finish when ordering.
Latches with Locks
Backset Description
Specify
Add to Lock Price
Springlatch
101, 301
Deadlatch
161, 501, 511,
561, 581
Restoring Deadlatch
201, 511**, 571, 711
2-3/8"*
Square corner, 1-1/8" x 2-1/4" 30-209 30-203 30-200
N/C
Square corner, 1" x 2-1/4" 30-207 30-201 30-198
Radius corner, 1" x 2-1/4" 30-208 30-202 30-199
2-3/4"
Square corner, 1-1/8" x 2-1/4" 30-206 30-197 30-194
Square corner, 1" x 2-1/4" 30-204 30-195 30-192
Radius corner, 1" x 2-1/4" 30-205 30-196 30-193
* 2-3/8" backset is furnished as a 1" faceplate standard.
** W511 Standard offering is the Deadlatch 30-197, however if a Restoring Deadlatch is needed it will have to be ordered 30-194
Latches as Parts Finishes: 605, 606, 613, 619, 622, 625, 626, 643E
Backset Description
Specify
List Price
Springlatch
101, 301
Deadlatch
161, 501, 511,
561, 581
Restoring
Deadlatch
201, 511, 571, 711
2-3/8"
Square corner, 1-1/8" x 2-1/4" Q330-209 Q330-203 Q330-200
$10.70
Square corner, 1" x 2-1/4" Q330-207 Q330-201 Q330-198
Radius corner, 1" x 2-1/4" Q330-208 Q330-202 Q330-199
2-3/4"
Square corner, 1-1/8" x 2-1/4" Q330-206 Q330-197 Q330-194
Square corner, 1" x 2-1/4" Q330-204 Q330-195 Q330-192
Radius corner, 1" x 2-1/4" Q330-205 Q330-196 Q330-193
Strikes with Locks
Description Lip Length Specify Add to Lock Price
ANSI, 1-1/4" x 4-7/8" standard 1-3/8" 30-148
N/C
Square Corner, T-Strike 1-1/8" x 2-3/4" 1-3/8" 30-149
Radius Corner, Full Lip Strike 1-5/8" x 2-1/4" 1" 30-150
Square Corner, Full Lip Strike 1-5/8" x 2-1/4" 1" 30-151
Strikes as Parts Finishes: 605, 606, 613, 619, 622, 625, 626, 643E
Description Lip Length Specify List Price
ANSI, 1-1/4" x 4-7/8" standard 1-3/8" Q330-148
$10.70
Square Corner, T-strike, 1-1/8" x 2-3/4" 1-3/8" Q330-149
Radius Corner, Full Lip Strike 1-5/8" x 2-1/4" 1” Q330-150
Square Corner, Full Lip Strike 1-5/8" x 2-1/4" 1” Q330-151
W Series Cylindrical Grade 2 LOCKS
111
Prices subject to change without notice
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Misc. Parts & Options • W-Series
Notes: 1) Outside lever only has abrasive strip application.
2) Abrasive strip not available in 613 finish.
3) Abrasive strip is not available on Avalon, Latitude, Longitude, Broadway, & Boardwalk.
Locks Less Components
Description Specify
Deduct from
Lock Price
Less standard (conventional) cylinder L Suffix
Example: W581LD DAN $7.10
Less latch LLL Suffix
Example: W581PD6 DAN 626 LLL 30-148 6.50
Less strike LLL Suffix
Example: W581GD7 DAN 626 30-206 LLL 6.50
Tactile Warning (abrasive strip)
Description Specify Add to Lock Price
Abrasive Strip Preface the design code with 6
Example: W581PD6 6DA (for Dane)
For small rose: preface the design code with 6S
Example for Small Rose: W501PD 6SD (for Dane) 6SQ (for Quantum)
$54.00
Screws
Part Number Description Finishes List Price
Q005-085 Screw Pack — Knobs 605, 613, 622, 630 $6.00
Q330-170 Screw Pack 605, 606, 613, 622, 630 6.00
Q330-182 Screw Pack — Dummy Trim – 4.30
Q330-179 Screw Pack — Small Rose 605, 613, 622, 626 6.00
Miscellaneous Parts
Part Number Description List Price
Q330-164 Conventional Cylinder tailpiece for all keyed functions
$4.30 Q330-168 SFIC Tailpiece (throw member for levers)
Q330-169 SFIC Tailpiece (throw member for knobs)
Q330-282 Inside Spring Cage Kit 10.30
Q330-448 Inside Spring Cage Kit, Small Rose 11.50
Q330-447 Outside Spring Cage Kit, Small Rose 11.50
Q033-026 Cylinder Lever Insert 0.24
W SeriesCylindricalGrade 2LOCKS
112 Price Book 7
Effective May 4, 2019 • Rev. 05/19
Prices subject to change without notice
W-Series Notes
W Series Cylindrical Grade 2 LOCKS
Prices subject to change without notice
113
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Introduction D200-Series
Finish Codes and Descriptions
Code Description
605 (US3) Bright Brass
606 (US4) Satin Brass
613 (US10B) Oil Rubbed Bronze
625 (US26) Bright Chrome
626 (US26D) Satin Chrome
Standard Features - Furnished unless otherwise specified
Certification BHMA - ANSI A156.5, 2001, Grade 2 auxiliary lock, Available UL Listed for 3-Hour fire door
Deadbolt 1-1/8" x 2-1/4", Square corner faceplate, 1" housing diameter, 1" throw
Strike 1-1/8" x 2-3/4", lipless, with box
Cylinder 6-Pin, Solid brass, Keyed 5-Pin, Falcon G keyway, Keyed different (KD)
Door Range 1-3/8" - 2-1/4" standard cylinder or thumbturn only; 1-5/8" - 2" interchangeable core cylinder
Keys Two, Nickel silver cut keys per lock, Falcon G keyway
Reinforcement Metal dust box reinforcer with three - 3" screws
Trim Ring 1" Wrought brass or bronze, reinforced with security insert
Backset 2-3/8" and 2-3/4" adjustable
D200 SeriesDeadboltGrade 2LOCKS
Product Identification
D 211 P F
Latch Suffix
F = UL Listed
Cylinder Suffix
B = Less SFIC
BDC = Disp. Const. Core
BB = With SFIC Core (Best)
G = With SFIC Core (Falcon)
H = With SFIC Keyed Const.
Core
L = Less 6-Pin Cylinder
P = 6-Pin Cylinder pinned
to 5 chambers
P6 = 6-Pin Cylinder pinned
to 6 chambers
P7 = 7-Pin Cylinder pinned
to 7 chambers
Function
See 115
Lock Series
SFIC = Small Format (Best® Style) Interchangeable Core
Table of Contents
Funcion Chart 115
Complete Lock Pricing 116
Options
Deadbolts ....................................................................................117
Strikes ...........................................................................................117
Small Format Interchangeable Cores ................................. 118
Small Small Construction Cores .......................................... 118
Lock Less Components ........................................................... 119
Conventional Cylinder Options ............................................. 119
Parts
Trim .............................................................................................. 120
Deadbolts .................................................................................. 120
Keys .............................................................................................. 120
Strikes ...........................................................................................121
Adapters ....................................................................................... 121
Screws .......................................................................................... 122
Screw Packs ...............................................................................123
Prices subject to change without notice
114 Price Book 7
Effective May 4, 2019 • Rev. 05/19
D141 / 241
D131 / 231
D111 / 211
D121 / 221
2 ³⁄₄
Mounting screws
Mounting screws
Faceplate
Anti-pry shield
UL rated
firecup
Mounting screws
Rose
Rose
Rose
Mounting screws
Mounting screws
Mounting
screws
Trim ring
Steel mounting plate
Dust box
Strike
Steel mounting
plate
Steel mounting
plate
Deadbolt
Trim ring
Cylinder
D200 Series
GRADE 2 DEADBOLT
D200 Series Deadbolt Grade 2 LOCKS
Prices subject to change without notice
115
Price Book 7
Effective May 4, 2019 • Rev. 05/19
D200 SeriesDeadboltGrade 2LOCKS
Functions D200 Series
D211P E0172 Classroom Function
Deadbolt thrown or retracted by key from outside.
Inside turn will only retract bolt. Bolt automatically
deadlocks when fully thrown.
D221P E0162 Single Cylinder x Rose
Deadbolt thrown or retracted by key only. Blank
plate inside. Bolt automatically deadlocks when
fully thrown.
D231P E0142 Double Cylinder*
Deadbolt thrown or retracted by key from either
side. Bolt automatically deadlocks when fully
thrown.
D241P E0152 Single Cylinder x Turn
Deadbolt thrown or retracted by key or by turn.
Bolt automatically deadlocks when fully thrown.
D251 Thumbturn x Thumbturn
Deadbolt thrown or retracted by turn unit from
either side. Application for storm shelters. Bolt
automatically deadlocks when fully thrown.
D261 E0192 Thumbturn, Inside Only
Deadbolt thrown or retracted by turn unit only. No
outside trim. Bolt automatically deadlocks when
fully thrown.
D261M E01112 Thumbturn, Inside x Rose
Deadbolt thrown or retracted by turn unit only.
Outside blank rose. Bolt automatically deadlocks
when fully thrown.
D271 Thumbturn x Occupancy Indicator
Deadbolt thrown or retracted by turn unit only.
Occupancy indicator on outside (reads either in use
or vacant with color coding). Bolt automatically
deadlocks when fully thrown.
Note: This function is not UL Listed.
BHMA / ANSI A156.5, 2001, Grade 2
Bored Deadbolt Locks
FALCON ANSI
* Caution: Double cylinder locks on residences and any door, in any structure, which is used for egress are a life safety hazard in times of emergency and their use
is not recommended. Installation should be in accordance with existing codes only.
Prices subject to change without notice
116 Price Book 7
Effective May 4, 2019 • Rev. 05/19
D200 Series Deadbolt Grade 2 LOCKS
D200-Series • Complete Locks
Notes: 1) Split finishes are priced at the highest finish price.
2) D271 Occupancy Indicator deadbolt is shipped with emergency key (61-509) and instructions.
3) ‘F’ Suffix must be added for UL product
Outside Cylinder Trim Rose and Turn
Inside Cylinder Trim
D-200 Series
Function Description
Designs and Finishes
626 605 606 613 622 625
Keyless
D251 Turn x Turn
$56.00 $62.00 D261 Turn, Inside Only
D261M Turn , Inside x Rose
D271 Turn, Inside x Occupancy Indicator 57.00 63.00
Single Cylinder Functions
D211P Classroom Function $76.00 $82.00
D221P Single Cylinder x Rose 73.00 79.00
D241P Single Cylinder x Turn
Double Cylinder Functions
CAUTION: Double cylinder locks on residences and any door in any structure which is used for egress are a life safety hazard in times of emergency
and their use is not recommended. Installation should be in accordance with existing codes only.
D231P Double Cylinder $96.00 $102.00
Prices subject to change without notice
117
Price Book 7
Effective May 4, 2019 • Rev. 05/19
D200 SeriesDeadboltGrade 2LOCKS
Bolt & Strike Options • D200 Series
Square Corner Round Corner Drive-In
Shaded items are standard components and are furnished with locks unless otherwise specified.
10-064 10-087 10-092 10-094 10-095
Deadbolts with Locks
Backset Description HSG Dia Specify Add to
Lock Price
2-3/8" or
2-3/4"
Square corner, 1-1/8" x 2-1/4", standard
1"
30-253
N/C
Square corner, 1" x 2-1/4" 30-175
1/4" Radius round corner, 1" x 2-1/4" 30-177
Circular, Drive-In bolt, 626 only 30-254
For UL Listed Locks
2-3/8" or
2-3/4" UL
Square corner, 1-1/8" x 2-1/4", standard
1"
30-173
N/CSquare corner, 1" x 2-1/4" 30-171
Circular, Drive-In bolt, 626 only 30-258
Strikes with Locks
Description Lip Length Specify Add to Lock Price
Drive-In thimble strike, 1-3/16" dia. 1" 10-064 N/C
ANSI, 1-1/4" x 4-7/8", with box 1-1/8" 10-087 $8.20
Full Lip, 1/4" radius corner, 1-5/8" x 2-1/4", no box 1-5/16" 10-092
N/CSquare Corner with metal dust box, 1-1/8" x 2-3/4", standard –10-094
Full Lip, square corner, 1-5/8" x 2-1/4", no box 10-095
Prices subject to change without notice
118 Price Book 7
Effective May 4, 2019 • Rev. 05/19
D200 Series Deadbolt Grade 2 LOCKS
D200-Series • Options Small Format IC
Small Format
Interchangeable Core
Notes: 1) Split finishes are priced at the highest finish price.
2) Key section must be specified and applicable charges for restricted sections will be applied. See page 141
3) Control keys are not furnished with locks and must be ordered separately. See page 151 for details.
4) Adapter kit 36-071 required for interchangeable core cylinders on 1-3/8" doors.
* Keying must be specified
** Locks are assessed one non-refundable handling charge (50-231F) per core.
Small Format Interchangeable Core and Small Format Construction Core
Description Specify
Add to Lock Price
(per core)
Small format core * G Suffix
Example: D211GD $45.00
Small format core (Best Style) * BB Suffix
Example: D211BB
Small format construction core ** H Suffix
Example: D211HD 45.00
Less Small format core B Suffix
Example: D211BD N/C
Small format disposable core BDC Suffix
Example: D211BDC N/C
Prices subject to change without notice
119
Price Book 7
Effective May 4, 2019 • Rev. 05/19
D200 SeriesDeadboltGrade 2LOCKS
Conventional Cylinders and Lock Less Components Options • D200 Series
Notes: 1) Finishes: 606 and 626 only
2) Specify keyway
3) Cylinders are furnished G keyway, keyed differently unless otherwise specified.
4) Restricted sections add $10.80 to list price. See page 8 for list of standard keyways.
All other keyways are considered restricted. Contact 877-671-7011 for availability.
* Specify specific competitor keyway on order. Competitor keyways are furnished 0 bitted, unless otherwise specified.
Not available Master keyed, except Schlage C. KD option is not available for locks containing 2 cylinders.
Lock Less Components
Description Specify Deduct from
Lock Price
Less deadbolt LLL for latch
Example: D211P 605 30-171 LLL $9.80
Less strike LLL for strike
Example: D211L 3.20
Less conventional cylinder L suffix
Example: D211L 18.10
Less conventional cylinder D231 L suffix
Example: D231L 36.20
Conventional Cylinder Options
Description Specify Add to Lock Price
(per core)
5 pinned cylinder P Suffix
Example: D211P STD
6 pinned cylinder P6 Suffix
Example: D211P6 N/C
7 pinned cylinder
(Not available on D231)
P7 Suffix
Example: D211P7 $11.50
6 pinned Competitor keyway cylinders* P6 Suffix
Example: D211P6 (0 Bitted, KD, KA4 only) N/C
D200-Series Complete Conventional Cylinders
Cylinder Mechanism Part Number Price Each
5 Pin Cylinder - D211, D241 Q500-067
$54.00
5 Pin Cylinder - D221 Q500-069
5 Pin Cylinder - D231 Q500-072
6 Pin Cylinder - D211, D241 Q500-010
6 Pin Cylinder - D221 Q500-056
6 Pin Cylinder - D231 Q500-012
7 Pin Cylinder - D211, D241 Q500-014 69.00
7 Pin Cylinder - D221 Q500-057
Prices subject to change without notice
120 Price Book 7
Effective May 4, 2019 • Rev. 05/19
D200 Series Deadbolt Grade 2 LOCKS
D200-Series • Parts Trim, Deadbolts, Cylinders
Rose and Turn Mounting Plate Rose
Square Corner 1/4" Radius Drive-In
Trim
Part Number Specify Finish Description Price Each
B302-041 • Rose and Turn $44.50
B302-045 • Rose and Turn (D211) 44.50
12-626 • Blank Rose (D221) 25.30
B600-018 • Mounting plate for rose and rose & turn 10.30
Deadbolts
Part Number Specify Finish Housing Diameter Description Price Each
Q330-253 •
2-3/8" or 2- 3/4"
Universal
Square corner, 1-1/8" x 2-1/4" faceplate
$16.20
Q330-175 • Square corner, 1" x 2-1/4" faceplate
Q330-177 • 1/4" radius corner, 1" x 2-1/4" faceplate
Q330-254 626 1" circular drive-in, 626 only
Keys - Emergency For Occupancy Indicator
Part Number Description Price Each
61-509 Emergency Release Key – Standard Size for Occupancy Indicator $11.00
61-510 Emergency Release Key – Large Size for Occupancy Indicator 20.90
Prices subject to change without notice
Price Book 7
Effective May 4, 2019 • Rev. 05/19 121
D200 SeriesDeadboltGrade 2LOCKS
Strikes, Adapters Parts • D200 Series
38-031 B520-649 B520-650
10-064 10-087 10-094 10-094 10-095
Strikes
Part Number Specify
Finish Description Lip Length Price
Each
10-064 • Drive-In, thimble strike, 1-3/16" deep - $16.70
10-087 • ANSI, 1-1/4" x 4-7/8, with box 1-1/8" 22.90
10-094 • Square corner with metal dust box, 1-1/8" x 2-3/4" - 12.20
10-092 • Full lip, 1/4" radius corner, 1-5/8" x 2-1/4", no box 1-5/16" 7.90
10-095 • Full lip, square corner, 1-5/8" x 2-1/4", no box
J250-028 2" strike mounting screws 2.00
5075 • Security Strike -9.00
Adapters
Part Number Specify
Finish Description Price Each
(per finish)
605 606
613 625 626
38-031 • 2-1/2" diameter adapter ring for 2-1/8" door prep, for under cylinder $19.00
B520-649 • Trim ring w/shield for D131/D141 23.50
B520-650 • Trim ring w/shield for IC functions 23.50
36-071 • 1-3/8” IC Core thin door shim kit, contains 36-066 & 36-068 14.60
Prices subject to change without notice
122 Price Book 7
Effective May 4, 2019 • Rev. 05/19
D200 Series Deadbolt Grade 2 LOCKS
D200-Series • Parts Screws
Screws
Part
Number
Specify
Finish
Description Application Price Each
(Order in
multiples
of 100)Size Type Use Door Thickness
Keyed, Single Conventional Cylinder
B600-100 1/4"-28 x 1-15/16" POH mach. Mounting 1-3/8" - 1-3/4"
$2.40B600-101 1/4"-28 x 2.425" POH mach. Mounting over 1-3/4"
B600-066 • 6-32 x 1/4" PH mach. Turn -
B520-298 10-32 x 3/8" PH mach. Anti-pry shield - 0.78
Keyed, Single SFIC Cylinder
B600-100 1/4"-28 x 1-15/16" POH mach. Mounting 1-3/8" - 2-1/4" 2.40
B600-066 • 6-32 x 1/4" PH mach. Turn -
Keyed, Double Conventional Cylinder
B600-047 1/4"-28 x 3-13/16" PH mach. Mounting 1-3/8" - 1-3/4" 2.40
B600-078 1/4"-28 x 3-29/64" PH mach. Mounting over 1-3/4"
B520-298 10-32 x 3/8" PH mach. Anti-pry shield - 0.78
Keyed, Double SFIC Cylinder
B600-053 1/4"-28 x 3-61/64" PH mach. Mounting 1-3/4" - 2-1/4" 2.40
B520-298 10-32 x 3/8" PH mach. Anti-pry shield -0.78
All Functions
C603-897 • #8 x 3/4" PFH combo Deadbolt & strike - 0.90
J250-028 #8 x 2" PFH wood 2" strike screw -2.00
R525-256 #12 x 3" PFH wood 3" metal dust box -
Prices subject to change without notice
123
Price Book 7
Effective May 4, 2019 • Rev. 05/19
D200 SeriesDeadboltGrade 2LOCKS
Parts• D200 Series
Screws
Screw Packs
Part
Number
Specify
Finish Door Thickness Contents Price
Each
Keyed, Single Conventional Cylinder
61-506 • 1 3/8" – 2 1/4" (2) B600-048
(2) F605-359
(4) C603-897
(1) B600-018
(2) B600-066
$17.80
Keyless, D261M, D271
61-504 • 1-3/8" - 1-3/4" (2) B520-662
(4) C603-897
(2) B600-066
(4) B600-018
23.10
61-505 • 1-3/4" - 2-1/4" (2) B520-663
(4) C603-897
(2) B600-066
(4) B600-018
23.10
Keyed, Single Conventional Cylinder
61-500 • 1 3/8" – 1 3/4" (1) B600-018
(2) B600-100
(2) B600-066
(4) C603-897
14.60
61-501 • over 1 3/4" – 2 1/4" (1) B600-018
(2) B600-101
(2) B600-066
(4) C603-897
14.60
Keyed, Single SFIC Cylinder
61-500 • 1 3/8" – 2" (1) B600-018
(2) B600-100
(2) B600-066
(4) C603-897
14.60
Keyed, Double Conventional Cylinder
61-502 • 1 3/8" – 1 3/4" (2) B600-047
(4) C603-897 11.10
61-503 • over 1 3/4" – 2 1/4" (2) B600-078
(4) C603-897 11.10
Keyed, Double SFIC Cylinder
61-507 • 1 3/8" – 2" (2) B600-053
(4) C603-897 11.10
Prices subject to change without notice
124 Price Book 7
Effective May 4, 2019 • Rev. 05/19
D200 Series Deadbolt Grade 2 LOCKS
D200-Series Notes
Prices subject to change without notice
125
Price Book 7
Effective May 4, 2019 • Rev. 05/19
H-SeriesIntroduction
InterconnectedLOCKS
Product No Longer Available.
Prices subject to change without notice
Price Book 7
Effective May 4, 2019 • Rev. 05/19
126
Interconnected LOCKS
H-Series • Functions
Product No Longer Available.
Prices subject to change without notice
127
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Interconnected Locks • H-Series
InterconnectedLOCKS
Product No Longer Available.
Prices subject to change without notice
128 Price Book 7
Effective May 4, 2019 • Rev. 05/19
Interconnected LOCKS
H-Series • Latch and Strike Options
Product No Longer Available.
Prices subject to change without notice
129
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Latches and Strikes • H-Series
InterconnectedLOCKS
Product No Longer Available.
Prices subject to change without notice
Price Book 7
Effective May 4, 2019 • Rev. 05/19
130
Interconnected LOCKS
H-Series • Cylinders & Options
Product No Longer Available.
131
Prices subject to change without notice
Price Book 7
Effective May 4, 2019 • Rev. 05/19
InterconnectedLOCKS
H2-Series
Introduction
Standard Features
Certification: ANSI/BHMA Certified A156.12-2013, Grade 2, UL listed for 3-hour fire door
With SFIC interchangable core cylinders: Grade 3 Security
Deadbolt: 1 X 2-1/4”, dual option faceplate, (square corner standard, round corner included in package),
1” housing diameter, 1” throw
Latch 1” x 2-1/4” dual option faceplate (square corner standard, round corner included in package).
1” edge bore required
Strikes: 1-1/8” X 2-3/4”, Square corner (deadbolt) and 1-5/8” X 2-1/4”, Square corner, T-strike, box,
1 1/8” x 2 3/4” (Deadlatch)
Backset: Adjustable backset, fits 2-3/8” or 2-3/4”
Cylinders: 6-pin, solid brass, keyed 6-pin, G keyway, keyed different (KD)
Door Range: 1-3/4” to 2” standard (1-3/8” available, must be specified)
Keys: Nickel silver cut keys, 6-pin, G keyway
Center to Center: Fits 4” or 5 1/2” (factory default) center to center door preps
Finish Codes and Descriptions
Code Description
605 (US 3) Bright Brass
619 (US 15) Satin Nickel
625 (US 26) Bright Chromium Plated
626 (US 26D) Satin Chromium Plated
643e (US 11) Aged Bronze
622 Matte Black
Product Identification
H2 210-500 P D
Latch Suffix
D = Deadlatch
Cylinder Suffix
P = 6-Pin Cylinder pinned
to 5 chambers
L = Less 6-Pin Cylinder(s)
B = Less SFIC
BDC = Disposable SFIC
G = Falcon Patented SFIC
H = Construction Core
BB = Best SFIC
P6 = 6-Pin Cylinder pinned
to 6 chambers
CP6 = 6-Pin Cylinder
Schlage C
Function
101 = Entry Lock
171 = Public Restroom Lock
w/Occupied Indicator
Lock Series
SFIC = Small Format (Best® Style) Interchangeable Core
Table of Contents
Functions 133
Complete Locks 134
Options
Deadbolts/Deadlatches ......................................................... 137
Deadbolt Strikes ....................................................................... 137
Strike Combinations ................................................................ 137
Lock Less Components ........................................................... 137
Parts
Deadbolts ...................................................................................138
Deadlatches ...............................................................................138
Deadbolt/Deadlatch Combinations ...................................138
Deadbolt Strikes .......................................................................138
Deadlatch Strikes .....................................................................138
Deadbolt/Deadlatch Strike Combinations .......................138
Screw/Screw Packs ..................................................................139
Complete Cylinders See Cylinders Section
How to Order Forms & Examples
132
Prices subject to change without notice
Price Book 7
Effective May 4, 2019 • Rev. 05/19
H2 Series
GRADE 2 INTERCONNECT LOCK
Interconnected LOCKS
133
Prices subject to change without notice
Price Book 7
Effective May 4, 2019 • Rev. 05/19
ANSI/BHMA Certified A156.12-2013, Grade 2, UL Listed for 3-hour fire door.
FALCON ANSI FALCON ANSI
H2101 F95 Entrance Lock
Deadbolt operated by key from
outside or by turn unit from inside.
Bolt automatically deadlocks when
fully thrown. Latch retracted by lever
from either side. Turning inside lever
retracts deadbolt and latch simulta-
neously for immediate exit.
H2171 Public Restroom Lock
with Occupancy Indicator
Deadlocking latch bolt operated by emergency
key outside or rotating inside lever. Outside
lever rigid. Rotating turn from inside extends
dead bolt and changes visual message on
outside from vacant to occupied. Both dead
bolt and deadlocking latch bolt retract by
rotating inside lever.
Functions • H2-Series
InterconnectedLOCKS
134 Price Book 7
Effective May 4, 2019 • Rev. 05/19
Prices subject to change without notice
Interconnected LOCKS
Avalon (AVA)
Quantum (QUA)
Dane (DAN)
Longitude (LON)
Flair (FLA)
Broadway (BRW)
Latitude (LAT)
Boardwalk (BRK)
Specify hand
H2-Series • Complete Locks
135
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Prices subject to change without notice
Complete Locks • H2 Series
InterconnectedLOCKS
Strikes, Deadbolts
10-094
Standard 10-092 10-095 10-116
Strikes, Deadlatches
10-001 10-026
Standard 10-027
Latches
Q330-041 Q100-101
Escutcheons
Plymouth (PLY)
136
Prices subject to change without notice
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Function Description Design and Finishes
AVL DAN FLA LAT QUA LON BRW BRK
626 643E 605* 619 622 625
H2101 Entrance Lock - Deadbolt Single Cylinder $305.00 $317.00
H2171 Public Restroom with Occupancy Indicator - No Cylinder (Interior Locking Only) 402.00 414.00
Specify both outside and inside designs if split.
*605 nish not available for LON and BRK lever designs.
Interconnected LOCKS
H2-Series • Complete Locks
137
Prices subject to change without notice
Price Book 7
Effective May 4, 2019 • Rev. 05/19
InterconnectedLOCKS
Deadbolts/Deadlatches, Deadbolt Strikes, Strike Combinations,
Locks Less Components
Deadbolts/Deadlatches
Combo Part
Number Deadbolt Deadlatch Backset - Hsg Dia. - Description Lock Adjustment
Q100-100 Q330-041 Q100-101 2 3/8" or 2 3/4" - 1" - Dual Option, 1" x 2 1/4", standard (square corner
standard, round corner included in the package) N/C
Deadbolt Strikes
Part Number Lip Length - Description Lock Adjustment
10-094 N/A - Square corner, 1 1/8" x 2 3/4"
N/C
10-092 1 1/8" - 1/4" Radius round corner, full lip, no box, 1 5/8" x 2 1/4"
10-095 1 1/8" - 1/4" Square corner, full lip, no box, 1 5/8" x 2 1/4"
10-116 N/A - Round corner strike, no lip, 1 1/8" X 2 3/4"
Deadlatch Strikes
Part Number Lip Length - Description Lock Adjustment
10-001 1 1/8" - Square corner, T-strike, box, 1 1/8" x 2 3/4"
N/C10-026 1 1/8" - Square corner, full lip, no box, 1 5/8" x 2 1/4"
10-027 1 1/8" - 1/4" Radius round corner, full lip, no box, 1 5/8" x 2 1/4"
Locks Less Components
Description Specify Deduct from Lock Price
Less deadbolt strike LLL for deadbolt strike
Example: H2101 DAN 12-339 LLL/10-001 N/C
Less deadlatch strike LLL for deadlatch strike
Example:H2101 DAN 12-339 LLL/10-094 N/C
Less both levers LLL for both Levers
Example: H2101 LLL/DAN LLL $11.60
Less Conventional Cylinder L sufx
Example: H2101LD/DAN 18.10
Strike Combinations
Deadbolt Strike Deadlatch Strike Specify Combo Number Add to Lock Price
10-094 10-001 10-109
N/C
10-094 10-026 10-121
10-116 10-027 10-122
10-092 10-027 10-123
10-095 10-026 10-124
Options • H2 Series
Notes: 1) Finishes: 606, 622, 626 and 643e
2) Specify keyway
3) Cylinders are furnished G keyway, keyed differently unless otherwise specified.
4) Restricted sections add $10.80 to list price. See page 8 for list of standard keyways.
All other keyways are considered restricted.
* Specify specific competitor keyway on order. Competitor keyways are furnished 0 bitted, unless otherwise specified.
Not available Master keyed, except Schlage C. KD option is not available for locks containing 2 cylinders.
* Keying must be specified
** Locks are assessed one non-refundable handling charge (50-231F) per core.
Notes: 5) Control keys are not furnished with locks and must be ordered separately. See page 151 for details
Conventional Cylinder Options
Description Specify Add to Lock Price (per core)
5 pinned cylinder P Suffix Example: H2101P STD
6 pinned cylinder P6 Suffix Example: H2101P6
6 pinned Competitor keyway cylinders*
available on H101, H511 only
P6 Suffix Example: H2101P6 (0 Bitted, KD, KA4 only) N/C
Small Format Interchangeable Core and Small Format Construction Core
Description Specify Add to Lock Price (per core)
Small format core * G Suffix Example: H2101GD $45.00
Small format core (Best Style) * BB Suffix Example: H2101BB
Small format construction core ** H Suffix Example: H2101HD 45.00
Less Small format core B Suffix Example: H2101BD N/C
Small format disposable core BDC Suffix Example: H2101BDC N/C
Shaded items are standard components and are furnished with locks unless otherwise specified.
138
Prices subject to change without notice
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Interconnected LOCKS
H2-Series • Parts
Deadbolts
Available Finishes - Specify for Listed Parts 605 619 626 643e 622
Q330-041, Q330-177, Q330-175 •••••
Part Number Backset - Description Price Each
Q330-041 2 3/8" or 2 3/4" - 1" Square corner, 1" x 2 1/4 $40.10
Q330-177 2 1/4" Standard Round Corner standard 40.10
Q330-175 2 1/4" standard Square Corner standard 40.10
Deadlatches
Available Finishes - Specify for Listed Parts 605 619 626 643e 622
Q100-101, Q100-102 •••••
Part Number Backset - Description Price Each
Q100-101 2 3/8" or 2 3/4" - Square corner, 1" x 2 1/4"
Round corner, 1"x 2 1/4", included w/o screws $35.60
Q100-102 2 1/4" - 1" Square corner, 1" x 2 1/4" Round corner, 1" x 2 1/4", included w/screws
Deadbolt Strikes
Available Finishes - Specify for Listed Parts 605 619 626 643e 622
10-094, 10-092, 10-095 •••••
Part Number Lip Length - Description Price Each
10-094 N/A - Square corner, 1 1/8” x 2 3/4” $12.20
10-092 1 1/8" - 1/4” Radius round corner, full lip, no box, 1 5/8” x 2 1/4” 7.90
10-095 1 1/8" - Square corner, full lip, no box, 1 5/8” x 2 1/4”
10-116 N/A - Round corner strike, no lip, 1 1/8” X 2 3/4” 13.70
37-016 Strike reinforce, use with 10-094 and 10-116 15.70
Deadlatch Strikes
Available Finishes - Specify for Listed Parts 605 619 626 643e 622
10-001, 10-026, 10-027 •••••
Part Number Lip Length - Description Price Each
10-001 Square corner, T-strike, box, 1 1/8” x 2 3/4” $6.50
10-026 1 1/8” - Square corner, full lip, no box, 1 5/8” x 2 1/4” 7.60
10-027 1 1/8” - 1/4” Radius round corner, full lip, no box, 1 5/8” x 2 1/4”
Deadbolt/Deadlatch Strike Combinations
Available Finishes - Specify for Listed Parts 605 619 626 643e 622
10-109, 10-121, 10-122, 10-123, 10-124 •••••
Part Number Deadbolt Strike Deadlatch Strike Price Each
10-109 10-094 10-001 $18.70
10-121 10-094 10-026 19.80
10-122 10-116 10-027 21.30
10-123 10-092 10-027 15.50
10-124 10-095 10-026
Deadbolt/Deadlatch Combinations
Available Finishes - Specify for Listed Parts 605 619 626 643e 622
Q100-100 & Q100-103 •••••
Part Number Backset - Description Deadbolt Deadlatch Price Each
Q100-100 2 3/8" or 2 3/4" - Dual Option, 1" x 2-1/4" w/ screws Q330-041 Q100-101 $75.70
Q100-103 2 3/8" or 2 3/4" - Dual Option, 1" x 2-1/4" w/o screws Q330-177 Q100-102
Q100-103 2 3/8" or 2 3/4" - Dual Option, 1" x 2-1/4" w/o screws Q330-177 Q100-102
Deadbolts, Deadlatches, Deadbolt/Deadlatch Combinations, Deadbolt Strikes,
Deadlatch Strikes, Deadbolt/Deadlatch Strike Combinations
139
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Prices subject to change without notice
InterconnectedLOCKS
Parts • H2 Series
Screw/Screw Packs
Available Finishes - Specify for Listed Parts 605 619 626 643e 622
B202-578, S206-504 •••••
Part Number Description Contents Price Each
B202-578 Latch and strike (4) C603-897 $4.80
S206-504 Chassis & trim
(2) B600-100
(2) B520-621
(2) F506-278
6.50
S206-505 Chassis & Trim, Thick Door
(2) B600-101
(2) B520-621
(2) F506-278
6.50
B502-873* Screw, reinf. strike - 0.58
* Order in multiples of 100
Finished Trim Subassemblies/Components, Miscellaneous
Subassemblies/Components, Screw/Screw Packs, Cylinders
140 Price Book 7
Effective May 4, 2019 • Rev. 05/19
Prices subject to change without notice
Interconnected LOCKS
H2-Series Notes
141
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Cylinders &
Key Systems
LOCKS
Prices subject to change without notice
Cylinders, Keys and Keying
Introduction
Finish Codes and Descriptions*
Code Description
605 (US 3) Bright Brass-Clear Coated
606 (US 4) Satin Brass-Clear Coated
613 (US 10B) Satin Bronze-Dark Oxidized and Oil Rubbed
619 (US15) Satin Nickel
622 Matte Black
643e Alternate 613 finish
626 (US 26D) Satin Chromium
629 (US32) Bright Stainless Steel
630 (US 32D) Satin Stainless Steel
* See individual products for finish availability.
Standard Features - Furnished unless otherwise specified
Standard Cylinder Solid Brass housings and plugs. Standard Keyway is Falcon G keyway.
Keyed different furnished unless otherwise specified (additional charges may apply,
See page 156 for keying charges) with 2 nickel silver keys. Mortise cylinder standard lengths
are 1-1/8" for conventional cylinders and 1-3/8" for small format interchangeable core housings.
SFIC Furnished in A keyway unless otherwise specified. Combinated cores are provided with 2 keys.
Restricted Keyways Falcon has a varied selection of restricted keyways for conventional and SFIC cylinders based
on geographic restrictions for usage. Minimum cylinder purchase required. See your Security and Safety
Consultant for more information or availability.
Table of Contents
Conventional Cylinders ...............................................142
Interchangeable Cores ................................................ 147
IC Cylinders and Cabinet Locks .................................148
Conventional Keys and Blanks .................................149
IC Keys and Key Blanks,
Disposable Construction Core ................................... 150
Keys & Keying Construction Core Program ............151
Cams, Tailpieces, Throw Members .......................... 152
Cylinder Parts and Service Equipment ................... 153
IC Cams, Throw Members, etc. ..................................154
IC Service Equipment & Supplies .............................155
Keying and Stamping Charges .................................156
Cylinders &
Key Systems LOCKS
Prices subject to change without notice
142
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Conventional Cylinders
Non-IC Products
* For 7-pin cylinder add $11.50.
Note: 5) Postal regulations prohibit master keying of mail box cylinders.
951 Available in:
605 606
613 619
622 625
626 630
643e
985 Available in:
605 606
613 619
622 625
626 630
643e
986T Available in:
605 606
613 619
622 626
630
643e
985D Available in:
605 606
613 619
622 625
626 630
643e
945 Available in:
605 606
613 626
629 630
950 Available in:
606 626 954 Available in:
606
626
MA and M Series Conventional Rim and Mortise Cylinders
Pins Length Description Number 626, 643e 605 606 613 630
619/622/625/626
5 or 6 1-1/8 Mortise 985 $61.00 $63.00
1-1/4 986
1-3/8
Mortise
987 61.00 63.00
1-1/2 988 78.00 80.00
5, 6, or 7 1-3/4 990 100.00 102.00
2992 105.00 107.00
61-1/8
Mortise, hotel function*
250
80.00 82.00
1-1/4 251
6 1-3/8 252
7 1-3/8 253
5, 6, or 7 – Rim 951 61.00 63.00
- 1-1/8 Mortise, thumbturn 985T
95.00 97.00
- 1-1/4 986T
-1-1/8 Mortise, classroom thumbturn (RH, CCW) 973
-1-1/8 Mortise, classroom thumbturn (LH, CW) 974
- 1 Dummy 984D 37.00 39.00
- 1-1/8 985D
*Hotel mortise cylinders are offered as masterkeyed or “O” bitted only and must be specified.
Notes: 1) MA cam (5622-STD) provided unless otherwise specified. See page 154 for additional available cams.
2) Mortise and rim cylinders are not available in any competitor keyway, except Schlage C.
3) 984D, 985D not available in 629 and 630.
4) Add $10.80 (list) for Falcon restricted keyways. See page 8 for for standard keyways. All others are restricted. Falcon
conventional cylinder restricted keyways use a unique pin kit (P/N 1417) and cutter wheel for keys.
Miscellaneous Cylinders
Finishes
Part Number Description 606, 626
605,
613 629, 630
945 Cam lock $109.00 $109.00 $109.00
950* Sliding door cylinder 49.00 - -
954* Mail box cylinder 60.00 - -
Falcon Conventional Cylinders, 5 and 6 Pin
Cylinder Mechanism Part Number List Price
5 Pin Cylinder 955 A23151-01
$54.00
5 Pin Cylinder B series except 611 function A23155-02
5 Pin Cylinder B series 611 function A23151-06
5 Pin Cylinder - D111, D141 for 1 3/8" to 1 3/4" thick doors Q500-064
5 Pin Cylinder - D111, D141 for 1 7/8"- 2 1/4" thick doors Q500-065
5 Pin Cylinder - D121 Q500-066
5 Pin Cylinder - D131 Q500-070
5 Pin Cylinder - D211, D241 Q500-067
5 Pin Cylinder - D221 Q500-069
5 Pin Cylinder - D231 Q500-072
5 Pin Cylinder H all other functions & designs A30028
5 Pin cylinder H511 knobs A30040
5 Pin Cylinder - H2101 Q100-105
5 Pin Cylinder RU/T series (except 381 IS, 571) A23151-05
5 Pin Cylinder RU/T series 381 IS A23151-06
5 Pin Cylinder RU/T series 571 A23151-07
5 Pin Cylinder X411, 501, 511, 521, 581 E & T A23152
5 Pin Cylinder X411, 501, 511, 521, 581 H A23152-02
5 Pin Cylinder X561 – E and T designs A23151
5 Pin Cylinder X561 – H designs, 571 – E & T A23151-02
5 Pin Cylinder X571 – H designs A23151-03
5 Pin Cylinder Y series A23155
6 Pin Cylinder 955 A23161-01
6 Pin Cylinder B series except 611 function A23165-02
6 Pin Cylinder B series 611 function A23161-06
6 Pin Cylinder - D111, D141 for 1 3/8" to 1 7/8" thick doors Q500-021
6 Pin Cylinder - D111, D141 for 1 7/8"- 2 1/4" thick doors Q500-022
6 Pin Cylinder - D121 Q500-058
6 Pin Cylinder - D131 for 1 3/8" - 1 3/4" thick doors Q500-054
6 Pin Cylinder - D131 for 1 7/8"- 2 1/4" thick doors Q500-055
6 Pin Cylinder - D211, D241 Q500-010
6 Pin Cylinder - D221 Q500-056
6 Pin Cylinder - D231 Q500-012
6 Pin Cylinder H101 A30028-01
6 Pin Cylinder H511 knobs A30040-01
6 Pin Cylinder - H2101 Q100-104
6 Pin Cylinder RU /T series 381 IS A23161-06
6 Pin Cylinder RU/T series (except 381 IS, 571) A23161-05
6 Pin Cylinder RU/T series 571 A23161-07
6 Pin Cylinder X411, 501, 511, 521, 581 E & T A23162
6 Pin Cylinder X411, 501, 511, 521, 581 H A23162-02
6 Pin Cylinder X561 – E and T designs A23161
6 Pin Cylinder X561 – H designs, 571 – E & T A23161-02
6 Pin Cylinder X571 – H designs A23161-03
6 Pin Cylinder Y series A23165
6 Pin Cylinder H451, 461 hotel/motel A30036-01 69.00
6 Pin Cylinder W lock Q330-154
54.006 Pin Cylinder W lock - except W561 (knob) Q330-238
6 Pin Cylinder W561 (knob) Q330-246
Falcon Conventional Cylinders, 7 Pin
Cylinder Mechanism Part Number List Price
7 Pin Cylinder - D111, D141 for 1 3/8" to 1 7/8" thick doors Q500-046
$69.00
7 Pin Cylinder - D111, D141 for 1 7/8"- 2 1/4" thick doors Q500-047
7 Pin Cylinder - D121 Q500-059
7 Pin Cylinder - D211, D241 Q500-014
7 Pin Cylinder - D221 Q500-057
7 pin cylinder RU/T series (except 381 IS, 571) A23171-05
7 pin cylinder RU/T series 381 IS A23171-06
7 pin cylinder RU/T series 571 A23171-07
7 pin cylinder X411, 501, 511, 521, 581 H A23172-02
7 pin cylinder X561 – H designs A23171-01
7 pin cylinder X571 – H designs A23171-02
Cylinders &
Key Systems
LOCKS
Prices subject to change without notice
143
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Conventional Cylinders
Key-in-Knob / Lever Type Cylinders
Including Padlock and Deadlock Insert Cylinders
Non-IC Products
Notes: 1) Finishes: 606 and 626 only
2) Specify keyway
3) Cylinders are furnished G keyway, keyed differently unless otherwise specified.
4) Add $10.80 (list) for Falcon restricted keyways. See page 8 for standard keyways. All others are restricted.
Falcon conventional cylinder restricted keyways use a unique pin kit (P/N 1417) and cutter wheel for keys.
Cylinders &
Key Systems LOCKS
Prices subject to change without notice
144
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Key-in-Knob / Lever Type Cylinders
Including Padlock and Deadlock Insert Cylinders
Conventional Cylinders
Notes: 1) Finishes: 606 and 626 only
2) Specify keyway, cylinders are furnished 0-bitted unless otherwise specified.
3) Master keying is available on Schlage C Keyway only.
Schlage Conventional Cylinders, 6 Pin
Cylinder
Mechanism Function Keying Offered Part Number List Price
Schlage C kwy 955 KA4, KD, 0-bit A23160-2
$54.00
Schlage E kwy 0-bit A23159-2
Schlage C kwy B except 611 KD, 0-bit A23160-13
Schlage E kwy 0-bit A23159-13
Schlage C kwy B611, T381 IS KD, 0-bit A23160-11
Schlage E kwy 0-bit A23159-11
Schlage C kwy D121, 221 KD, 0-bit Q033-071
Schlage E kwy 0-bit Q033-066
Schlage C kwy D131, 231 KD, 0-bit, KA4 Q033-070
Schlage E kwy 0-bit Q033-067
Schlage C kwy D111, D211, D241 (Q033-069 only) KD, 0-bit, KA4 Q033-069
Schlage E kwy 0-bit Q033-066
Schlage C kwy H deadbolt KA4, KD, 0-bit A23160-10
Schlage E kwy 0-bit A23159-10
Schlage C H2101 KA4, KD, 0-bit Q100-108
Schlage C kwy H511 knobs KA4, KD, 0-bit A23160-7
Schlage E kwy 0-bit A23159-7
Schlage C kwy T571 KA4, KD, 0-bit A23160-12
Schlage E kwy 0-bit A23159-12
Schlage C kwy T Except 571 & 381 IS KA4, KD, 0-bit A23160-000
Schlage E kwy 0-bit A23159-000
Schlage C kwy X411, 501, 511, 521, 581 E & T KA4, KD, 0-bit A23160-5
Schlage E kwy 0-bit A23159-5
Schlage C kwy X411, 501, 511, 521, 581 H KA4, KD, 0-bit A23160-6
Schlage E kwy 0-bit A23159-6
Schlage C kwy X561 E & T KA4, KD, 0-bit A23160-1
Schlage E kwy 0-bit A23159-1
Schlage C kwy X571 E & T, X561 H KA4, KD, 0-bit A23160-3
Schlage E kwy 0-bit A23159-3
Schlage C kwy X571 H KA4, KD, 0-bit A23160-4
Schlage E kwy 0-bit A23159-4
Schlage C kwy Y series KA4, KD, 0-bit A23160-8
Schlage E kwy 0-bit A23159-8
Schlage C kwy
W Series Levers MK, KA4, KD, 0-bit Q330-152
W Series Knobs (except W561) MK, KA4, KD, 0-bit Q330-237
W561 Knob MK, KA4, KD, 0-bit Q330-245
Schlage Conventional Cylinders, 5 Pin
Cylinder
Mechanism Function Part Number List Price
5 Pin Schlage C Q500-065-5C : 5 Pin cylinder Schlage C -D111, 141 for 1-7/8" - 2-1/4" Q500-065-5C
$54.00
5 Pin Schlage C Q500-071 : 5 Pin cylinder D131 for 1-7/8' - 2-1/4" Q500-071
5 Pin Schlage C Q500-071-5C : 5 Pin cylinder Schlage C - D131 for 1-7/8' - 2-1/4" Q500-071-5C
5 Pin Schlage C T lock all except T571 A23160-14
5 Pin Schlage C X LOCK 561 E & T A23160-15
5 Pin Schlage C PADLOCKS A23160-16
5 Pin Schlage C X LOCK 561 H, 571 E & T A23160-17
5 Pin Schlage C X LOCK 571 H A23160-18
5 Pin Schlage C X LOCK 411 E & T, X501,511,521,581 E & T A23160-19
5 Pin Schlage C X LOCK 411 H, X501,511,521,581 H A23160-20
5 Pin Schlage C H LOCK 511 LOWER A23160-21
5 Pin Schlage C Y LOCK A23160-22
5 Pin Schlage C H LOCK 101,511 (UPPER) A23160-23
5 Pin Schlage C B611 A23160-24
5 Pin Schlage C T571 A23160-25
5 Pin Schlage C B LOCK EXCEPT B611 A23160-26
5 Pin Schlage C W561 (Knobs) Q330-245-5
Cylinders &
Key Systems
LOCKS
Prices subject to change without notice
145
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Conventional Cylinders
Key-in-Knob / Lever Type Cylinders
Including Padlock and Deadlock Insert Cylinders
Corbin Russwin Conventional Cylinders, 6 Pin
Cylinder Mechanism Function Keying Offered Part Number List Price
Corbin 60 kwy
955
KD, 0-bit A23167-2
$54.00
Corbin/Russ L4 kwy 0-bit A23174-2
Russwin D1 kwy KD, 0-bit A23168-2
Corbin 60 kwy
B Series
KD, 0-bit A23167-13
Corbin/Russ L4 kwy KA4, 0-bit A23174-13
Russwin D1 kwy KD, 0-bit A23168-13
Corbin 60 kwy
B611, T381 IS series
KD, 0-bit A23167-11
Corbin/Russ L4 kwy KA4, 0-bit, KD A23174-11
Russwin D1 kwy KD, 0-bit A23168-11
Russwin D1 kwy D121, 221 KD, 0-bit Q033-074
Corbin/Russ L4 kwy 0-bit Q033-079
Russwin D1 kwy D131, 231 KD, 0-bit Q033-073
Corbin/Russ L4 kwy 0-bit Q033-078
Russwin D1 kwy D141, D241 KD, 0-bit Q033-072
Corbin 60 kwy KD, 0-bit Q033-077
Corbin/Russ L4 kwy
H deadbolt
KA4, 0-bit A23174-7
Corbin 60 kwy KD, 0-bit A23167-7
Russwin D1 kwy 0-bit A23168-7
Corbin 60 kwy
H511 knobs
0-bit A23167-10
Corbin/Russ L4 kwy KA4, 0-bit A23174-10
Russwin D1 kwy KD, 0-bit A23168-10
Corbin 60 kwy
T Except 571 & 381 IS
0-bit A23167
Corbin/Russ L4 kwy KA4, 0-bit A23174
Russwin D1 kwy KD, 0-bit A23168
Corbin 60 kwy
T571
KD, 0-bit A23167-12
Corbin/Russ L4 kwy 0-bit A23174-12
Russwin D1 kwy KD, 0-bit A23168-12
Corbin 60 kwy
X 411, 501, 511, 521, 581 H
0-bit A23167-6
Corbin/Russ L4 kwy 0-bit A23174-6
Russwin D1 kwy KD, 0-bit A23168-6
Corbin 60 kwy
X411, 501, 511, 521, 581 E & T
0-bit A23167-5
Corbin/Russ L4 kwy 0-bit A23174-5
Russwin D1 kwy KD, 0-bit A23168-5
Corbin 60 kwy
X561 E & T
KD, 0-bit A23167-1
Corbin/Russ L4 kwy 0-bit A23174-1
Russwin D1 kwy KD, 0-bit A23168-1
Corbin 60 kwy
X571 E & T, X561 H
KD, 0-bit A23167-3
Corbin/Russ L4 kwy 0-bit A23174-3
Russwin D1 kwy KD, 0-bit A23168-3
Corbin 60 kwy
X571 H
KD, 0-bit A23167-4
Corbin/Russ L4 kwy 0-bit A23174-4
Russwin D1 kwy KD, 0-bit A23168-4
Corbin 60 kwy
Y Series
0-bit A23167-8
Corbin/Russ L4 kwy 0-bit A23174-8
Russwin D1 kwy KD, 0-bit A23168-8
Corbin 60 kwy
W Series Levers
0-bit Q330-166
Corbin/Russ L4 kwy 0-bit , KA4 Q330-158
Russwin D1 kwy KD, 0-bit Q330-210
Corbin 60 kwy
W Series Knobs (except W561)
KD, 0-bit Q330-241
Corbin/Russ L4 kwy 0-bit , KA4 Q330-240
Russwin D1 kwy KD, 0-bit Q330-242
Corbin 60 kwy
W561 Knobs only
KD, 0-bit Q330-249
Corbin/Russ L4 kwy 0-bit , KA4 Q330-248
Russwin D1 kwy KD, 0-bit Q330-250
* Cylinders are furnished 6-pin 0-bit unless otherwise specified, KA and KD available, no masterkeying.
Notes: 1) Finishes: 606 and 626 only.
2) Specify keyway.
Cylinders &
Key Systems LOCKS
Prices subject to change without notice
146
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Key-in-Knob / Lever Type Cylinders
Including Padlock and Deadlock Insert Cylinders
Conventional Cylinders
Notes: 1) Finishes: 606 and 626 only
2) Specify keyway, cylinders are furnished 0-bitted unless otherwise specified.
3) Master keying is not available.
Sargent Conventional Cylinders, 6 Pin
Cylinder
Mechanism Function Keying Offered Part Number List Price
Sargent LA Keyway
955
KD, 0 Bit
A23166-2
$54.00
B Series A23166-13
B611, T381 IS A23166-11
H deadbolt A23166-7
H511 Knobs A23166-10
T Except 571 & 381 IS A23166
T571 A23166-12
X411, 501, 511, 521, 581 E & T A23166-5
X411, 501, 511, 521, 581 H A23166-6
X561 E & T A23166-1
X571 E & T, X561 H A23166-3
X571 H A23166-4
Y Series A23166-8
W Series Levers Q330-160
W Series Knobs (except W561) Q330-243
W561 Knob only Q330-251
Yale Conventional Cylinders, 6 Pin
Cylinder
Mechanism Function Keying Offered Part Number List Price
Yale 8 (Para) Keyway
955
KD, 0-bit
A23169-2
$54.00
B except 611 A23169-13
B611, T381 IS A23169-11
D121, D221 KD Q033-076
D141, 241, 111, 211 Q033-075
H deadbolt
KD, 0-bit
A23169-7
H511 knobs A23169-10
T Except 571 & 381 IS A23169
T571 A23169-12
X411, 501, 511, 521, 581 E & T A23169-5
X411, 501, 511, 521, 581 H A23169-6
X561 E & T A23169-1
X571 E & T, X561 H A23169-3
X571 H A23169-4
Y series A23169-8
W Series Levers Q330-156
W Series Knobs (except W561) Q330-239
W561 Knob only Q330-247
Cylinders &
Key Systems
LOCKS
Prices subject to change without notice
147
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Interchangeable Cores
Pricing: Uncombinated cores have no pins, springs or keys. Combinated core prices include master keying.
Finishes: 606 and 626 standard.
Packaging: Uncombinated cores are packed 20 per box.
Keyways: The “A” keyway is standard for IC products and will be supplied unless otherwise specified.
A, B, C, D, DD, E, F, G, H, J, K, L, M, N, Q, R, TB and TD are equivalent to Best and Arrow IC keyways of the same letter
designations. All other keyways are restricted. Add $10.80 list for all restricted keyways.
When ordering locks or cores master keyed into existing Best, Arrow or other IC systems, a copy of the bitting list for the
existing system is required with the order. Competitors’ bitting lists are safeguarded the same as Falcon bitting lists.
See page 157.
Logo: Cores and keys are supplied with the Falcon logo standard.
Combinated cores supplied without logo are furnished with plain (non-embossed) keys.
Notes: 1) For restricted keyways add $10.80 per core. See page 141 for restricted keyway policies.
2) For temporary construction cores and policy, See page 151.
3) For 605, 613 and 625 add $2.80 per core. Minimum 250 pieces.
4) Keying must be specified on combinated cores. (unspecified orders will default to 0-bitted)
IC Products
C607 Available in:
606 622
626 643e
Regular Core (sufx keyway to number)
Uncombinated Combinated
Description 6-Pin 7-Pin Price 6-Pin 7-Pin Price
Standard C646 C647 $34.00 C606 C607
$45.00
Best style capping CB846 CB847 CB806 CB807
No logo C648 C649 34.00 C608 C609
No logo, Best capping CB848 CB849 CB808 CB809
Cylinders &
Key Systems LOCKS
Prices subject to change without notice
148
Price Book 7
Effective May 4, 2019 • Rev. 05/19
IC Cylinders & Cabinet Locks
All prices are less core. Not available with C997.
IC Products
Note: 5) U.S. postal regulations prohibit master keying of mail box locks.
Notes: 1) All mortise cylinders will be furnished with cam 5622-IC, except for MA381 function which will be supplied
with 5620-IC and 5621-IC. See page 154 for additional available cams.
2) C977 is only furnished with 012667-001 Adams Rite Cam
3) When ordering cylinders with construction cores, include the suffix -7 CCA or -6 CCA added to the part
number. i.e. C987-6 CCA 626 for a 6 pin small format construction core included with a C987 cylinder in 626 finish
4) For mortise cylinders A08794-XXX tapered ring is supplied by default. If different is desired, please specify.
Available in:
605 606
613 619
622 625
626 643e
Available in:
605 606
613 619
622 625
626 643e
Available in:
605 606
613 619
622 625
626 643e
Rim Tapered Head Mortise
C943 C945 C959 C979 C982
Small Format Interchangeable Rim and Mortise Core Housings Only
Cat. Number Length Pins Description 626
605 606 613 629 630
626/625/619/643e
C987 1-3/8" 6 or 7 Mortise $38.00 40.00
C988 1-1/2" 6 or 7 Mortise
C990 1-3/4" 6 or 7 Mortise 49.00 51.00
C991 1 7/8" 6 or 7 Mortise 51.00 53.00
C992 2" 6 or 7 Mortise 51.00 53.00
C977 Fits Adams Rite 6 or 7 Mortise, tapered head 38.00 40.00
C997 1-3/8" 6 or 7 Mortise, unassembled, less cam 24.00 26.00
C262 1-5/8" 6 or 7 Mortise, hotel function RH 68.00 70.00
C265 1-5/8" 6 or 7 Mortise, hotel function LH
C953 N/A 6 or 7 Rim 40.00 42.00
Cabinet Locks and Miscellaneous
Cat. No. Description
Finishes
606, 626 606, 626 605, 626 605, 613, 629, 630
C942 Cabinet lock $87.00 - - $89.00
C943 Cam lock 124.00 - - 126.00
C945 Cam lock - heavy cam 87.00 - - 89.00
C959 Push lock for sliding doors 121.00 - -
C979 Rim cabinet lock - 75.00 -
C982 Mail box lock 71.00 - 75.00
Cylinders &
Key Systems
LOCKS
Prices subject to change without notice
149
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Conventional Keys and Blanks
Non-IC Products
* Specify key section to key (blank) numbers.
Note: 1) Prices listed for key blanks and cut keys are for E, G and H sections only. For all other key sections
add $0.80 list per key to prices shown. Letter of au tho ri za tion required for re strict ed sections;
not available to stock; shipped directly to the end user.
001911-001-70 Blue Plastic Bow
(not shown full size)
2” access bow meets Title 24 of
The California Code for the Hand i capped.
Standard Plain
(non-embossed) Large Bow
Key Blanks
(Specify keyway and order in multiples of 50 except where specified)
Part. Number Description Qty./Wt. Each
KB573 Standard 5-pin 50/1 $2.30
KB577 Standard 6-pin
KB581 Standard 7-pin 35/1 2.70
KB751 Plain 5-pin (non-embossed) 50/1 2.40
KB761 Plain 6-pin (non-embossed)
KB771 Plain 7-pin (non-embossed) 35/1 2.70
KB544 Large bow - 5-pin 25/1 5.30
KB590 Large bow - 6-pin 25/1 6.30
KB579 Emergency - 6-pin 50/1 8.80
KB592 Emergency, large bow - 6-pin 25/1 10.50
001911-001-70 Plastic handicap access bow only 17.00
KB525 Block-O-Key construction key - 4-pin 1 4.90
KB536 Block-O-Key removal tool (Specify Keyway) 1 2.30
Q330-215 6 Pin Schlage C Blank 1 3.20
Cut Keys
Part. Number Description Each
KB574 Standard 5 Pin
$7.50
KB578 Standard 6 Pin
KB582 Standard 7 Pin
KB794 Plain 5-pin (non-embossed)
KB797 Plain 6-pin (non-embossed)
KB799 Plain 7-pin (non-embossed)
KB545 Large bow - 5-pin (When furnished with lock - 2 keys) additional per lock 8.20
KB545 Large bow - 5-pin
KB591 Large bow - 6-pin (When furnished with lock - 2 keys) additional per lock 9.80
KB591 Large bow - 6-pin
KB580 Emergency - 6-pin 12.40
KB584 Emergency - 7-pin 14.90
KB593 Emergency, large bow - 6-pin 12.80
KB905 With 2" handicap access bow, 5-pin 16.90
KB906 With 2" handicap access bow, 6-pin
KB907 With 2" handicap access bow, 7-pin 22.70
KB531 Block-O-Key construction key - 4-pin 8.00
KB565 Construction key - 5-pin 7.70
KB566 Construction key - 6-pin
KB567 Construction key - 7-pin 8.60
330055 Schlage C - 6 pin 7.30
Q330-276 Schlage Split Key 6-pin 9.80
Cylinders &
Key Systems LOCKS
Prices subject to change without notice
150
Price Book 7
Effective May 4, 2019 • Rev. 05/19
IC Keys and Key Blanks, Disposable Construction Core
IC Products
Notes: 1) Specify keyway
2) Order standard blanks in multiples of 50.
3) Prices for key blanks and/or cut keys are for single key sections only.
Key blanks 50 min. Cut keys no minimum quantity
4) For double milled key (e.g. DE, EF, FG) add $3.20 each to prices shown,
minimum order quantity of 50 keys.
5) Triple and quadruple milled keys add $3.70 each to price shown,
minimum order quantity of 50 keys.
6) Letter of au tho ri za tion required for re strict ed sections; not available to stock; shipped directly to the end user.
7) Prices shown above are for standard key sections, prices for all restricted sections add $0.80.
Standard Plain
(non-embossed) Clipped
for Handicap
Standard
Key Tip
Mortise EMK
Tip
Best Key
* KB 800 & 801 are not available in multi milled keyways.
IC Core Key Blanks
Standard Plain Both Sides Price
Standard KB628 KB718 $2.60
Stamped CONTROL KB608 KB744 5.00
M Series EMERGENCY KB737 KB748 7.50
Blade for 2" Access Bow KB633 - 7.20
Plastic Access Bow 001911-001-70 - 7.00
IC Core Cut Keys
Standard Plain Both Sides
Price6-Pin 7-Pin 6-Pin 7-pin
Standard KB632-1 KB632-2 KB673-1 KB673-2 $7.50
CONTROL KB609-1 KB609-2 KB778-1 KB778-2 9.70
M Series EMERGENCY KB738-1 KB738-2 KB779-1 KB779-2 11.30
2" Access Bow KB916 KB916-1 - - 17.30
Best® Style SFIC Core Key Blanks
Standard Plain Both Sides Price
Standard KB800* KB801* $2.70
Best® Style SFIC Core Cut Keys
Standard Plain Both Sides Price
Standard 6-Pin KB807-1 KB809-1 $7.80
Stamped Control 6-Pin KB811-1 KB813-1 10.10
Standard 7-Pin KB807-2 KB809-2 11.80
Standard Control 7-Pin KB811-2 KB813-2 18.00
Cylinders &
Key Systems
LOCKS
Prices subject to change without notice
151
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Keys & Keying Construction Core Program
Notes: 1) Keyed and temporary construction cores will be installed in locks and cylinders automatically unless otherwise
specified on orders.
2) Construction cores for a given project are keyed alike to one of a limited number of combinations nationwide.
Different Falcon projects in the same area using the same or different contractors may use the same key.
Where a higher degree of security is desired, order a set of cores in 606 or 626 finish keyed alike to a random
combination. Specify “KS1.” Such cores are not returnable to Falcon but may be reused for other projects.
3) Temporary construction cores are an inexpensive alternative to interior keyed construction cores.
This temporary is intended for use on interior door applications or where security on-site is not a concern.
C607CCA 1408
Construction Core Program
Part Number Description Specify Price
C606CCA Construction core 6-pin Specify "H" suffix when ordering with Locks, Specify
CCA when ordering with Mortise and Rim Cylinders $45.00
C607CCA Construction core 7-pin
KB632-1CCA Cut key for construction core 6-pin 7.80
KB632-2CCA Cut key for construction core 7-pin
KB609-1CCA Cut control key 6-pin (order separately) 10.10
KB609-2CCA Cut control key 7-pin (order separately)
1408 Disposable construction core Specify “BDC” suffix when ordering 5.50
50-231F Non-refundable handling charge per core 7.60
Construction Core Program
Keyed construction cores may be ordered with interchangeable core locks and cylinders. These cores may also be ordered
separately. All keyed construction cores are assessed a non-refundable handling charge (50-231). Standard payment terms apply.
Features:
• 6-pin A keyway.
• 7-pin A keyway.
• Construction cores are a flat black finish on the face. Other colors may be provided. Contact Customer Service for available colors.
• Construction cores are furnished with no keys (NCK). Cut keys must be ordered separately.
• A control key is required to install and remove construction cores. Control keys must be ordered separately.
• Construction cores may be returned for credit in working condition. Credit is issued upon receipt of cores at our factory.
A Return Material Authorization (RMA) must be issued, in order for cores to be returned.
Temporary Construction Core Program (Disposable)
Temporary construction cores may be ordered with interchangeable core locks and cylinders. These cores may also be ordered separately. Standard
payment terms apply.
Features:
• Conveniently fits both 6 & 7-pin SFIC applications.
• No keys need to be issued.
• Disposable construction cores are not returnable.
• The disposable core is inserted in the lever or knob and is operated by a thumbturn, which retracts the latch bolt.
Cylinders &
Key Systems LOCKS
Prices subject to change without notice
152
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Cams, Tailpieces, Throw Members
Non-IC Products
Conventional Mortise Cylinder Cams
Part Number Application Price
1396 Cam kit for conventional cylinders $181.00
A09890-000-00 Adapter ring for 1-1/2˝ diameter cylinders 41.10
5622-STD Falcon MA CAM for conventional mortise cylinders, except MA381
3.105620-STD Falcon MA CAM for conventional mortise cylinder MA381 inside function
5621-STD Falcon MA CAM for conventional mortise cylinder MA381 outside function
10-Pack Price
A08867-000-00 Falcon cyl. in Sargent and Yale (26) $69.60
A09888-000-00 Falcon cyl. in Schlage L Series (13)
A09894-001-00 Falcon, Ilco, Lori and Schlage cyl. in M deadbolt functions (1) 47.20
A09894-002-00 Arrow, Sargent, Yale cyl. in M deadbolt functions (2)
69.60
A09894-003-00 Corbin Russwin cyl. in M deadbolt functions (3)
A09894-021-00 Falcon cyl. in Falcon concealed VR Delta trim (21)
A09894-022-00 Arrow, Sargent, Yale cyl. in Falcon Delta trim (22)
A09894-023-00 Corbin Russwin cyl. in Falcon Delta trim (23)
A09897-000-00 Falcon M Series non-deadbolt functions (4) 47.20
A09897-024-00 Falcon dogging cyl. in Falcon device (24) 63.90
A09898-000-00 Adams Rite 4070 (16)
A09899-000-00 Adams Rite MS (6) 47.20
A20065-000-00 M381 outside (14)
A20069-000-00 Corbin Russwin ML2200 69.60
Conventional Cylinder Tailpieces and Driver Bars
Part Number Application Price
1389 Tailpiece kit (assortment of tailpieces and 1416 cap tool) $226.00
B600-045 D Series double cylinder (1-3/8" - 1-3/4" doors) 2.60
B600-046 D Series double cylinder (over 1-3/4" - 2-1/4" doors)
B520-651 D Series single cylinder (1-3/8" - 1-3/4" doors) 2.60
B520-652 D Series single cylinder (over 1-3/4" - 2-1/4" doors) 2.60
Q330-164 W Series 501, 511, 561, 581, 711 Functions 4.30
030480-004-00 Y Series 1.00
A08350-000-00 H101 1.00
10-Pack Price
A22164-000-00 X Series 561 (6 Pin) Elite & Troy $27.60
A22164-001-00 X Series 561 (6 Pin) Hana, 955 33.70
A22164-002-00 X Series 571 (6 Pin) Elite & Troy, 571 (7 Pin) Hana 27.60
A22164-003-00 X571 – H designs 27.60
A22169-000-00 X Series 411, 501, 511, 521 (6 Pin) Elite & Troy 7.00
A22169-002-00 X Series 411, 501, 511, 521 (6 & 7 Pin) Hana
A28351-000-00 Rim conventional $33.00
A30034-001-00 H451, H461 10.40
A30038-000-00 H511 7.00
A30480-004-00 B Series 10.50
A30730-001-00 RU, T Series most 6-pin
23.10
A30730-002-00 RU, T Series most 7-pin and T571 6-pin
A30730-003-00 RU381, T381 inside 6-pin, B611
A30730-004-00 RU381, T381 inside 7-pin
A30730-006-00 RU571, T571 7-pin
Conventional Cylinder Tailpiece Retainers, Etc.
Part Number Application 10-Pack Price
A08355-000-00 Tailpiece retainer for rim cylinder $29.30
A08395-000-00 Tailpiece retaining washer for H101 6.10
A12053-000-00 Tailpiece retainer, 22164 & 22169 9.00
A24264-000-00 Tailpiece spacer 3.60
A30037-000-00 Tailpiece retainer, 30034 & 30038 9.00
B600-071 D Series Retainer Washer 1 pack / 0.82
Cylinders &
Key Systems
LOCKS
Prices subject to change without notice
153
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Cylinder Parts and Service Equipment
PIN KIT
Non-IC Products
See below for wave washer. Protective rings listed above include wave washer.
Cylinder Collars (also used for IC cylinders)
Part Number Size Shape 626
605, 606
613, 625, 622, 643e
A08790-000 9/32"
Straight Protective
used on escutcheon
trim
$13.70 $15.70
A08790-001 13/32"
A08790-002 17/32"
A08790-003 21/32"
A08790-004 55/64"
A08794-000 9/32"
Tapered Protective
used on sectional trim 13.70 15.70
A08794-001 13/32"
A08794-002 17/32"
A08794-003 21/32"
008876-000 1/8"
Blocking Ring 5.30 7.30
008876-005 3/16"
008876-001 1/4"
008876-002 3/8"
008876-003 1/2"
008876-004 5/8"
008862-000 n/a Rim Cylinder 5.30 7.30
Other Parts
Part Number Application Pack Qty. Pkg. Price
008789-001-60 Wave washer - $1.60
012162-000-10 Cylinder cap - 2.30
031100-000-30 Hex nut for cam lock and mortise cylinders -10.00
A02750-000-00 Cam Screw 100 23.20
A03039-000-00 Mortise hotel function instruction plate packet -9.00
A12165-000-00 Cap retaining pin 10 7.30
A12165-100-00 Cap retaining pin 100 57.10
A12166-000-00 Spring for retaining pin 100 10.30
Pin Kits, Pins, Tools and Service Equipment
Part Number Application Pack Qty. Pkg. Price
1416 Cylinder cap tool - steel
-
$47.20
1417 Pin kit for restricted keyways (includes follower and cyl. Cap tool) 274.00
1418 Pin kit, standard (includes follower and cyl. Cap tool) 364.00
1421 Plug follower 19.00
1453 Depth key set, 5-pin 48.70
1453-1 Depth key set, 6-pin
1453-2 Depth key set, 7-pin 61.50
030113-000-60 Key gauge for standard keys (.018" systems) 8.00
030166-T10-30 Torx Screw Bit #10 25.10
030166-T15-30 Torx Screw Bit #15
030166-T20-30 Torx Screw Bit #20 28.90
042613-000-60 Key gauge for restricted keyways (.025" systems)
35-057 Extractor Tool 22.50
A08552-000-00 Universal top pin
100
8.90
A08553-00X-00 Bottom pins, 0 thru 9: replace; "x" with size (.018" systems)
A08554-000-00 Tumbler springs 11.00
A08556-000-00 Construction master pins 25.50
A08580-00X-00 Master pins, 2 thru 9: replace; "x" with size (.018" systems)
8.90A48553-00X-00 Bottom pins, 0 thru 6: replace; "x" with size (.025" systems)
A48580-00X-00 Master pins, 1 thru 6: replace; "x" with size (.025" systems)
61-509 Emergency Release Key – Standard Size for Occupancy Indicator - 11.00
61-5110 Emergency Release Key – Large Size for Occupancy Indicator - 20.90
Cylinders &
Key Systems LOCKS
Prices subject to change without notice
154
Price Book 7
Effective May 4, 2019 • Rev. 05/19
IC Cams, Throw Members, etc.
Door Range:
1³⁄₈” to 1⁷⁄₈"
>1⁷⁄₈” to 2¹⁄₄”
SFIC: <2”
D111/D211
D141/D241
759-202B
256-025B
D121/D221
B520-667
NA
B220-032
D131/D231
085-202B
640-006B
540-006B
D251/D271
B520-653
AN
AN
D261/D261M
B600-041
AN
AN
”0.2
1.265” 0.67”
2.875” 2.4”
0.95”
156-025B
”6.1
1.4” 1.03” 0.45”
IC Products
IC Mortise Cylinder Cams
Part Number Description Price
1397 Cam kit $225.00
10-Pack Price
5622-IC Falcon MA CAM for SFIC mortise cylinders, except MA381
$57.30 pkg of 10
5620-IC Falcon MA CAM for SFIC mortise cylinders MA381 inside function
5621-IC Falcon MA CAM for SFIC mortise cylinders MA381 outside function
A12667-000-00 Sargent / Yale (7)
A12667-001-00 Adams Rite MS (8)
A12667-002-00 Adams Rite 4070
A12667-003-00 Straight (5), M series non-deadbolt functions
A12667-006-00 Corbin Russwin master ring (25) (requires bushing A09890)
A12667-007-00 M series deadbolt functions (10)
A12667-008-00 Schlage L Series (12)
A12667-011-00 Corbin Russwin, Arrow (11)
A12667-013-00 Corbin Russwin DL4000
A12667-020-00 Falcon concealed vertical rod Delta trim (20)
A12667-03A-00 Sargent 7737
A20278-000-00 M381 outside (15)
IC Throw Members (Tailpieces) and Spacers for Cylindrical Locksets
022175-000-30 X Series except X571, new style
$2.90
022175-001-30 X571 new style 6-pin
022175-002-30 X571 new style 7-pin
030739-000-30 RU, T Series most 6-pin
030739-001-30 RU, T Series most 7-pin
030739-002-30 RU381, T381 inside 6-pin 9.90
030739-003-30 RU381, T381 inside 7-pin
Q001-055 B & Y Series 2.90
Q330-168 W Series Levers 3.90
Q330-169 W Series Knobs 3.90
A12689-000-00 Rim 10.40 pkg. of 10
A12698-000-00 Retainer, IC rim cylinder 16.30 pkg. of 10
A12742-001-00 Coupler and tailpiece H, D400 and D800 series deadbolts 5.10
Cylinder Collars
See page 153 for cylinder collars. –
Other Parts
A12663-001-00 Throw pins, package of ten (10)
$12.80 pkg.
A12663-002-00 Throw pins, package of ten (10)
A12663-003-00 Throw pins, package of ten (10)
A12663-004-00 Throw pins, package of ten (10)
A12663-008-00 Throw pins, package of ten (10)
A12663-009-00 Throw pins, package of ten (10)
A12664-010-00 Drive washer, package of ten (10)
002807-000-30 Mortise cylinder security screw 0.68
Cylinders &
Key Systems
LOCKS
Prices subject to change without notice
155
Price Book 7
Effective May 4, 2019 • Rev. 05/19
IC Service Equipment & Supplies
IC Products
Tools
Part Number Description Price Each
1208 Key bitting punch machine, standard A2 System $3,407.00
1392 Capping pin, Best style capping 35.20
1393 Capping block, Best style capping 164.00
1398 Core and key stamping fixture 190.00
1400 IC mortise cyl. assy./ disassembly tool set w/punch 247.00
1401 IC mortise cyl. assy./ disassembly tool 224.00
1402 IC cam staking center punch 20.50
1405 Ejector tool 23.10
1407 Mortise cylinder installation wrench 38.20
1411 Pinning block set, Falcon spring cover cores 130.00
1414 Pinning block only, Falcon spring cover cores 85.30
1415 Tamping Plate 46.80
012612-000-60 Key Gauge (A2 System) 15.70
030425-000-60 Key Gauge (A4 System) 15.70
031034-000-30 A4 System depth bar for key bitting punch 232.00
Pin Kits
1404 (standard) Pin kit, A2 System complete in wooden case; Falcon spring cover cores
$765.00
1391 Pin kit, A2 System complete in wooden case; Best style capping
1403 Pin kit, A4 System complete in wooden case; Falcon spring cover cores
1390 Pin kit, A4 System complete in wooden case; Best style capping
Pin, Springs, etc.
A12635-0xx-00 A2 top pins, #2 through #19; replace “xx” with size, 100/pkg
$11.70 pkg
A12636-0xx-00 A2 bottom pins, #0 through #9; replace “xx” with size, 100/pkg
A30375-0xx-00 A4 top pins, #1 through #11; replace “xx” with size, 100/pkg
A30376-0xx-00 A4 bottom pins, #0 through #5; replace “xx” with size, 100/pkg
A12637-000-00 Tumbler Spring, 100/pkg. 9.70 pkg
A12637-500-00 Tumbler Spring, 500/pkg. 25.20 pkg
A12638-000-00 Caps for Best style cores, 500/pkg.
29.40 pkgA12639-001-00 Spring cover, 6-Pin, 100/pkg.
A12639-002-00 Spring cover, 7-Pin 100/pkg.
Cylinders &
Key Systems LOCKS
Prices subject to change without notice
156
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Keying and Stamping Charges
Notes: 1) Any cylinder operated by keys other than its own change key, or Single Keyed (SKD) groups within a masterkey system are subject
to masterkeying charges. The Falcon Masterkey department determines and makes the final decision in the selection and use of key.
100% system expansion is allowed for new masterkey systems, unless otherwise specified.
2) Construction keyed cylinder charges are in addition to masterkeying charges. PKI (Pack Keys Independently) packaging is included at
no additional charge.
3) Construction keying is not available with SFIC cylinders. Construction cores may be ordered for interchangeable core locks and for
mortise and rim cylinders, for use during construction. See Construction Core Program.
4) Block-O-Key construction keying requires 6-pin cylinders and is available only in select keyways.
5) Construction keys must be ordered separately. See Page 151.
6) Conventional cylinders are available 0-bitted.
7) Conventional restricted key section cylinders are furnished 1-bitted unless otherwise specified.
8) Falcon locks and cylinders are furnished with Falcon G key section, keyed differently (KD) unless otherwise specified.
9) Falcon SFIC cylinders are furnished with A keyway, uncombinated, without keys when not specified.
Master Keying
Part Number Description List Price
50-210 Conventional cylinder Master Keyed (MK), Grand Master Keyed (GMK),
Emergency Master Keyed (EMK), and Single Keyed (SKD) groups $14.60
–Interchangeable core Master Keyed (MK), Grand Master Keyed (GMK),
Emergency Master Keyed (EMK), and Single Keyed (SKD) groups No Charge
Construction Keying – Conventional Cylinder
Part Number Description List Price
50-211 Cylinder Construction Keyed (CK) $4.80
50-212 Cylinder Block-O-Keyed (BOK)
60-000 Pack change keys independently for construction keying No Charge
Other Keying (Non-Masterkeyed)
Part Number Description List Price
–Cylinder keyed different (KD) or keyed alike to a Falcon selected
combination (KA) in sets of 2 or more No Charge
–Cylinder 0-bitted or 1-bitted, as applicable No Charge
50-001 Conventional cylinder keyed to a specific combination $7.30
50-215 Standard cylinder extra key charge 6.00
50-232 IC core extra key charge 6.50
60-001 Pack change keys independently for non-construction keying 0.52 per key
Cylinders &
Key Systems
LOCKS
Prices subject to change without notice
Price Book 7
Effective May 4, 2019 • Rev. 05/19 157
Keying and Stamping Charges
Key & Core Stamping
Part Number Description
Price
Standard I-Core
50-002 VKC - Cylinders - Standard and I-Core, Standard and
non-standard code $4.20 –
50-217 VKC – Visual Key Control, standard symbols
(AA1, AA2, etc. on keys 1.90 $1.90
50-003 Non-standard code letters or numbers than industry standard key
symbols on key (5 max.)
50-216 CKC - Cylinders - I-Core only, Standard and
non-standard code – 4.20
Special & Custom Die Stamps
Part Number Description List Price
50-219 Keys stamped with custom or special dies – i.e, STATE OF FLORIDA, DO NOT DUPLICATE,
etc. $1.90
Bitting Lists (Keying Transcripts)
Part Number Description List Price
50-123 Bitting list for factory masterkeyed products (requires written authorization
from end-user on letterhead) $161.00
50-120 Establish new masterkey system for field masterkeying, up to 50 bittings. 147.00
50-121 Each additional bitting for field masterkeying. 1.00
50-122 New change key bitting for cylinders keyed in the field
Prices subject to change without notice
Price Book 7
Effective May 4, 2019 • Rev. 05/19
158
Cylinders &
Key Systems LOCKS
Notes
159
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Auxiliary
Products
LOCKS
Prices subject to change without notice
Introduction Auxillary Products
Table of Contents
Padlocks 160
Complete Lock Pricing 160
Cable Locks 161
Padlocks ......................................................................................163
Padlocks, Parts and Accessories ......................................... 164
Complete Padlocks 166
Special Security Products ......................................................167
Lock Mounts ..............................................................................168
Price Book 7
Effective May 4, 2019 • Rev. 05/19
160
Auxiliary
Products LOCKS
Prices subject to change without notice
Auxiliary Products
Notes: 1) Key is removable with shackle in locked position only.
2) Falcon padlocks now discount as complete locks and not as parts.
Padlocks Available in:
606
Padlocks
Cat No. Description
Finish
606
955-1P Deadlocking type - 1" shackle $142.00
955-2P Deadlocking type - 2" shackle 153.00
955-6P Deadlocking type - 6" shackle
Options
Description Price
Cylinders
5-pin (drilled for 6) Standard
6-pin No Charge
7-pin (per cylinder) $11.50
Less cylinder Deduct $19.00
Competitor’s keyways in standard cylinder model (see page 8) No Charge
Keying
Master keying, conventional cylinder See page 156
Construction master keying, con ven tion al cylinder See page 156
161
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Auxiliary
Products
LOCKS
Prices subject to change without notice
Introduction Padlocks • Auxiliary Products
Standard Features for Commercial Series Padlocks - Stock
Certification
Meets or exceeds ASTM standards for standard steel shackle, shackle cutting
and corrosion resistance.
Lock Body Chrome plated brass - resists corrosion.
Shackle Hardened steel alloy, double deadbolt locking mechanism.
Cylinder* Accepts Falcon 6 or 7-pin small format interchangeable core (SFIC), as well as SFIC products from
other manufacturers.
*All padlocks supplied less cylinder. Cylinders must be ordered separately.
Standard Features for Commercial Series Cables - Interchangeable Core
Lock Head Die-cast zinc, 407 satin finish
Cable Braided steel vinyl coated for greater cut resistance than twisted cables
Cylinder* Accepts Falcon 6 or 7-pin small format interchangeable core (SFIC), as well as SFIC products from
other manufacturers.
*All cables supplied less cylinder. Cylinders must be ordered separately.
Important Ordering Information
Locks must be ordered in case quantities; this does not apply to factory ordered Falcon branded 955 Series locks. Case quantity is listed with each
product. All prices listed are unit prices.
Note: All Falcon cylinders will ship separately.
162
Auxiliary
Products LOCKS
Prices subject to change without notice
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Auxiliary Products • Cable Locks
Stainless Steel Shackles
For use with 10 Series Padlocks
KZ13D10 1/4” 1 1/2” 3/4” $5.50
KZ13F10 1/4” 2” 3/4” 5.60
For use with 20 Series Padlocks
KZ13D20 5/16” 1 1/2” 3/4” $6.80
KZ13F20 5/16” 2” 3/4” 7.10
For use with 40 Series Padlocks
KZ13D40 3/8” 1 1/2” 3/4” $8.50
KZ13F40 3/8” 2” 3/4” 8.80
Note: 2) Case quantity is 6.
KC Series - 2', 4' lengths
40 Series - 3/8" Shackle diameter
10 Series - 1/4" Shackle diameter 20 Series - 5/16" Shackle diameter
163
Auxiliary
Products
LOCKS
Prices subject to change without notice
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Padlocks Commercial Series • Auxiliary Products
Notes: 1) Product is shipped without cylinder. For cylinder options: see Cylinders.
2) Keying options: see Keys & Keying. See Terms & Conditions for more information.
3) Case quantity is 6.
Notes: 4) Product is shipped without cylinder. For cylinder options: see Cylinders.
5) Keying options: see Keys & Keying. See Terms & Conditions for more information.
6) Case quantity is 6.
Padlocks - Small Format Interchangeable Core (SFIC) - Less Cylinder
Shackle Dimensions
Part Number A B C List Price
Chrome Plated Brass Body - KS11 2 Series (Body Dimensions: 1-25/32" wide, 2-3/16 " high, 7/8" thick)
KS11D1200 1/4" (6.4mm) 1-1/2" (38mm) 3/4" (19mm) $31.10
KS11F1200 2" (51mm) 32.50
Chrome Plated Brass Body - KS21 Series (Body Dimensions: 1-25/32" wide, 2-3/16" high, 7/8" thick)
KS21A1200
5/16" (8mm)
3/4" (19mm)
3/4" (19mm)
$30.00
KS21D1200 1-1/2" (38mm) 33.00
KS21F1200 2" (51mm) 34.60
Chrome Plated Brass Body - KS41 Series (Body Dimensions: 1-15/16" wide, 2-3/16" high, 7/8" thick)
KS41D1200 3/8" (9.5mm) 1-1/2" (38mm) 3/4" (19mm) $33.00
KS41F1200 2" (51mm) 34.60
Cables - SFIC - Less Cylinder
Part Number Cable Diameter Cable Length List Price
Braided Steel Key Cable - KC2 Series
KC215A130 5/8" (15mm) 2' (60cm) $62.60
KC215B130 5/8" (15mm) 4' (121cm) 67.00
164
Auxiliary
Products LOCKS
Prices subject to change without notice
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Padlocks, Parts and Accessories
Auxiliary Products • Commercial Series
Note: 1) Case quantity is 6.
10 Series Shackles
3/4” 1 1/2” 2“ 4“
40 Series Shackles
3/4” 1 1/2” 2“ 4“
20 Series Shackles
1 1/2” 2“ 4“
Commercial Series: Replacement Shackles
Part Number
Shackle Dimensions
List Price A B C
Hardened Steel Shackle - For Use with 10 Series Padlocks
KZ11A10
1/4" (6.4mm)
3/4" (19mm)
3/4" (19mm)
$5.20
KZ11D10 1-1/2" (38mm) 6.40
KZ11F10 2" (51mm) 6.50
KZ11G10 4" (102mm) 9.10
Hardened Steel Shackle - For Use with 20 Series Padlocks
KZ11D20 5/16" (8mm) 1-1/2" (38mm) 3/4" (19mm) $8.00
KZ11G20 4" (102mm) 11.50
Hardened Steel Shackle - For Use with 40 Series Padlocks
KZ11F40 3/8" (9.5mm) 2" (51mm) 3/4" (19mm) $10.30
KZ11G40 4" (102mm) 14.20
Brass Shackle - For Use with 10 Series Padlocks
KZ12D10 1/4" (6.4mm) 1-1/2" (38mm) 3/4" (19mm) $6.40
KZ12G10 4" (102mm) 9.10
Brass Shackle - For Use with 20 Series Padlocks
KZ12D20 5/16" (8mm) 1-1/2" (38mm) 3/4" (19mm) 7.50
KZ12G20 4" (102mm) 11.50
Brass Shackle - For Use with 40 Series Padlocks
KZ12D40 3/8" (9.5mm) 1-1/2" (38mm) 3/4" (19mm) $10.00
KZ12G40 4" (102mm) 14.20
Stainless Steel Shackles - For use with 10 Series Padlocks
KZ13D10 1/4" (6.4mm) 1-1/2" (38mm) 3/4" (19mm) $6.00
KZ13F10 2" (51mm) 6.40
Stainless Steel Shackles - For use with 20 Series Padlocks
KZ13D20 5/16" (8mm) 1-1/2" (38mm) 3/4" (19mm) $8.00
KZ13F20 2" (51mm) 8.30
Stainless Steel Shackles - For use with 40 Series Padlocks
KZ13D40 3/8" (9.5mm) 1-1/2" (38mm) 3/4" (19mm) $10.00
KZ13F40 2" (51mm) 10.30
Important Ordering Information
Locks must be ordered in case quantities; this does not apply to factory ordered Falcon branded 955 Series locks. Case quantity is listed with each
product. All prices listed are unit prices.
Note: All Falcon cylinders will ship separately.
40 Series Shackles
3/4” 1 1/2” 2“ 4“
165
Auxiliary
Products
LOCKS
Prices subject to change without notice
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Parts and Accessories - Stock Commercial Series • Auxiliary Products
This page intentionally le blank
Price Book 7
Effective May 4, 2019 • Rev. 05/19
166
Auxiliary
Products LOCKS
Prices subject to change without notice
Auxiliary Products • Complete Padlocks
Dust Cover Screws
Dust Cover
Cylinder
Lock Head
Washer
Throw Member
Mounting Screw
Kryptonite by Schlage
Commercial Padlock Series
Exploded View - SFIC
KS Series Padlock Parts
Exploded View - SFIC
KC Series Cable Parts
SFIC
Throw Member
167
Auxiliary
Products
LOCKS
Prices subject to change without notice
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Special Security • Auxiliary Products
855101 855118 855125
994848
Specialty Security Products
Security Hasps
Part Number Body Dimension Price Each
855101 8-1/2" x 4-1/2" 3 $39.20
855118 7-3/4" x 1-3/4" 6 12.50
855125 5" x 2" 6 11.90
Hasp
994848 4-1/2" x 1-5/8" 6 $6.40
Prices subject to change without notice
Price Book 7
Effective May 4, 2019 • Rev. 05/19
168
Displays LOCKS
Displays • Lock Mounts
No. 21 No. 22 No. 23 No. 24 No.35-410 No. 002086-000-70
Note: 1) For MA Series, locks must be 1-3/4" door thickness and left handed.
Lock Mounts
Part Number For Product Backset Price
21 B, T ,K and W Lever Series
2-3/4" $133.00
22 D, X and W Knob Series
23 H Series
24 RU Series
35-MA MA Series (101)
36-MA MA Series (371, 381, 411, 431, 441)
37-MA MA Series (521, 551, 561, 581)
38-MA MA Series (301, 311, 321)
39-MA MA Series (531, 541, 571, 621, 641)
40-MA MA Series (451)
002086-000-70 Acrylic Mounting Ring N/A 37.40
169
Product Index
LOCKS
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Locks • Product Index
253 ......................142
330055 .................149
35-057 ..................153
35-MA...................168
36-071...................93, 121
36-MA...................168
37-016...................138
37-MA...................168
38-031 ..................93, 121
38-MA...................168
39-MA...................168
40-MA ..................168
50-001 ..................156
50-002 .................157
50-003..................157
50-120 ..................157
50-121 ...................157
50-122...................157
50-123...................157
50-210 ..................156
50-211 ...................156
50-212...................156
50-215...................156
50-216 ..................157
50-217...................157
50-219 ..................157
50-232 ..................156
5075 ....................93, 121
5620-IC .................154
5620-STD...............152
5621-IC . . . . . . . . . . . . . . . . . .154
5621-STD ...............152
5622-IC .................154
5622-STD...............152
60-000 .................156
60-001 ..................156
61-500 ..................94, 123
61-501 ...................94, 123
61-502 ..................94, 123
61-503 ..................94, 123
61-504 ..................123
61-505 ..................123
61-506 ..................123
61-507...................94, 123
61-509 ..................120
61-510 ...................120
855101...................167
855118...................167
855125 ..................167
945......................142
950......................142
951 ......................142
954......................142
973 . . . . . . . . . . . . . . . . . . . . . .142
974......................142
984D....................142
985......................142
985D ....................142
985T ....................142
986 .....................142
986T ....................142
031702-000 ............101
031703-000 ............101
031705-000-30 ........102
031718-000 . . . . . . . . . . . . .102
031719-000 . . . . . . . . . . . . .102
031741-000-50 .........102
042613-000-60 ........153
10-001...................137, 138
10-026 ..................137, 138
10-027...................137, 138
10-064 ..................93, 121
10-087 ..................93, 121
10-092 .................. 93, 121,
137, 138
10-094 .................. 93, 121,
137, 138
10-095 .................. 93, 121,
137, 138
10-109...................137, 138
10-116....................137, 138
10-121....................137, 138
10-122 ...................137, 138
10-123 ...................137, 138
10-124 . . . . . . . . . . . . . . . . . . .137, 138
12-626...................92, 120
1208.....................155
1387 .....................54, 68
1388.....................54, 68
1389.....................152
1390.....................155
1391......................155
1392 .....................155
1393 .....................155
1396.....................152
1397 .....................154
1398.....................155
1400.....................155
1401 .....................155
1402.....................155
1403.....................155
1404.....................155
1405.....................155
1407 .....................155
1411 ......................155
1414 .....................155
1415......................155
1416 .....................153
1417......................153
1418 .....................153
1421......................153
1453 .....................153
1453-1 ...................153
1453-2...................153
21........................168
22 .......................168
23 .......................168
24 .......................168
24483760...............65
250......................142
251 ......................142
252 ......................142
030709-000-60 .......54, 68
030712-000-30 ........54, 68
030712-001-30 .........54, 68
030718-000-30 ........54, 68
030718-001-30 .........54, 68
030722-000-30 ........54, 68
030724-000-30........54, 68
030726-000-30........54, 68
030726-007-30 ........54, 68
030728-000............54, 68
030729-000-70 ........68
030732-000-30 ........68
030732-001-30.........68
030733-000-55 ........54, 68
030739-000-30........154
030739-001-30.........154
030739-002-30 ........154
030739-003-30 ........154
030740-000 ...........67
030740-001 ............67
030740-002............67
030742-000............53, 67
030742-001 ............53, 67
030742-002 ............53, 67
030744-000............53, 67
030744-001 ............53, 67
030744-002............53, 67
030755-005-30 ........54, 69
030787-000-70 ........68
030831-004-30 ........54, 69
030926-001 ............67
030926-002............53, 67
030926-003............53, 67
030927-001 ............67
030927-002 ............53, 67
030927-003 ............53, 67
030928-001 ............67
030928-002............53, 67
030928-003............53, 67
030929-001 ............67
030929-002............53, 67
030929-003............53, 67
030930-001 ............67
030930-002............53, 67
030930-003............53, 67
030996-001 ............67
030996-002 ...........53, 67
030996-003 ...........53, 67
031034-000-30 ........155
031100-000-30.........153
031452-000 ............53
031511-000-30..........54, 68
031514-000-30 .........54, 68
031515-004-30 .........69
031516-000-70 .........68
031519-000-30.........54, 68
031531-006-30 .........69
031533-006-30.........54, 69
031541-006-30 . . . . . . . . .54
031700-002 ............101
031701-002 .............101
001911-001-70 ..........149
002086-000-70 .......168
002762-000............54
002770-016-30.........54, 69
002807-000-30 .......154
005099-000 . . . . . . . . . . .40
008789-001-60 . . . . . . . .153
008862-000 ...........153
008876-000 ...........153
008876-001 ............153
008876-002............153
008876-003............153
008876-004 ...........153
008876-005 ...........153
012136-000.............77
012137-000 .............77
012138-000.............77
012162-000-10 .........153
012172-000-30 .........77
012236-000 ............77
012612-000-60.........155
012966-000 ............77
012967-000 ............77
021164-016.............. 54, 69, 77,
102
022104-000-30 ........54, 68
022105-000-30 ........54, 68
022106-002-55.........54, 68
022108-000-60 ........54, 68
022112-000-30 .........54, 68
022175-000-30.........154
022175-001-30 .........154
022175-002-30 .........154
022258-007 ............77
022258-008............77
022258-009............77
022290-007 ............77
022920-000 ...........77
022950-007............77
022950-008............77
022953-007 ............77
022980-007............77
022980-008 ...........77
022980-009 ...........77
022981-007.............77
022986-001-50 ........54, 68
024030-000 ...........77
024416-012 ............. 54, 69, 77,
102
030057-002............40
030113-000-60.........153
030166-T10-30.........153
030166-T15-30 .........153
030166-T20-30 ........153
030425-000-60 .......155
030480-004-00 . . . . . . .152
030654-000-625 ......68
030654-000-626 ......68
030703-000-30........54, 68
030704-002-30........54, 68
030706-002............67
Part No. Page Part No. Page Part No. Page Part No. Page
170
Product Index LOCKS
Price Book 7
Effective May 4, 2019 • Rev. 05/19
A23168-7................145
A23168-8 ...............145
A23169 ..................146
A23169-1 ................146
A23169-10...............146
A23169-11 ...............146
A23169-12...............146
A23169-13...............146
A23169-2................146
A23169-3................146
A23169-4 ...............146
A23169-5................146
A23169-6 ...............146
A23169-7................146
A23169-8 ...............146
A23171-01................76, 143
A23171-02 ...............76, 143
A23171-05 . . . . . . . . . . . . . . . 51, 61,
143
A23171-06............... 51, 61,
143
A23171-07 ............... 51, 61,
143
A23172-02 ..............76, 143
A23174 ..................145
A23174-1 ................145
A23174-10...............145
A23174-11................145
A23174-12 ...............145
A23174-13 ...............145
A23174-2 ................145
A23174-3 ................145
A23174-4................145
A23174-5 ................145
A23174-6................145
A23174-7 ................145
A23174-8................145
A24264-000-00 .......152
A28351-000-00 ........152
A30028 . . . . . . . . . . . . . . . . .143
A30028-01..............143
A30034-001-00........152
A30036-01..............143
A30037-000-00 .......152
A30038-000-00 . . . . . . .152
A30040.................143
A30040-01 .............143
A30375-0xx-00 ........155
A30376-0xx-00 ........155
A30480-004-00 .......152
A30730-001-00 ........152
A30730-002-00........152
A30730-003-00........152
A30730-004-00 .......152
A30730-006-00 .......152
A30746-000-00 .......54, 68
A30747-000-00........54, 68
A30748-000-00 .......69
A30748-001-00 ........69
A30749-060-00 .......54, 68
A30749-070-00........54, 68
A23160-23 ..............144
A23160-24 . . . . . . . . . . . . . .144
A23160-25 ..............144
A23160-26 . . . . . . . . . . . . . .144
A23160-3................144
A23160-4 ...............144
A23160-5 ...............144
A23160-6 ...............144
A23160-7................144
A23160-8 ...............144
A23161...................76, 143
A23161-01 ...............143
A23161-02...............76, 143
A23161-03...............76, 143
A23161-05............... 51, 61,
143
A23161-06............... 51, 61,
99, 143
A23161-07............... 51, 61,
143
A23162 ..................76, 143
A23162-02 ..............76, 143
A23165 ..................143
A23165-02 ..............99, 143
A23166 ..................146
A23166-1 ................146
A23166-10...............146
A23166-11 ...............146
A23166-12...............146
A23166-13...............146
A23166-2................146
A23166-3................146
A23166-4 ...............146
A23166-5................146
A23166-6 ...............146
A23166-7................146
A23166-8 ...............146
A23167 ..................145
A23167-1 ................145
A23167-10...............145
A23167-11................145
A23167-12 ...............145
A23167-13 ...............145
A23167-2 ................145
A23167-3 ................145
A23167-4................145
A23167-5................145
A23167-6................145
A23167-7 ................145
A23167-8................145
A23168..................145
A23168-1 ................145
A23168-10...............145
A23168-11 ...............145
A23168-12...............145
A23168-13...............145
A23168-2................145
A23168-3................145
A23168-4 ...............145
A23168-5................145
A23168-6 ...............145
A12667-007-00.........154
A12667-008-00 ........154
A12667-011-00..........154
A12667-013-00 .........154
A12667-020-00 ........154
A12667-03A-00 ........154
A12689-000-00........154
A12698-000-00........154
A12742-001-00 .........154
A20065-000-00 .......152
A20069-000-00.......152
A20278-000-00 .......154
A22164-000-00 ........152
A22164-001-00.........152
A22164-002-00 ........152
A22164-003-00 ........152
A22169-000-00 ........152
A22169-002-00 ........152
A23151...................76, 143
A23151-01 ...............143
A23151-02...............76, 143
A23151-03...............76, 143
A23151-05............... 51, 61,
143
A23151-06............... 51, 61,
99, 143
A23151-07 . . . . . . . . . . . . . . . 51, 61,
143
A23152 ..................76, 143
A23152-02 ..............76, 143
A23155 ..................143
A23155-02 ..............99, 143
A23159-000 ............144
A23159-1 ................144
A23159-10...............144
A23159-11 ...............144
A23159-12 ...............144
A23159-13 ...............144
A23159-2................144
A23159-3................144
A23159-4................144
A23159-5................144
A23159-6................144
A23159-7................144
A23159-8................144
A23160-000 . . . . . . . . . . . .144
A23160-1 ................144
A23160-10 ..............144
A23160-11 ...............144
A23160-12...............144
A23160-13...............144
A23160-14...............144
A23160-15...............144
A23160-16...............144
A23160-17...............144
A23160-18...............144
A23160-19...............144
A23160-2 ...............144
A23160-20..............144
A23160-21...............144
A23160-22 ..............144
987......................142
988 .....................142
990 .....................142
992......................142
994848 .................167
A02750-000-00 .......153
A03039-000-00 .......153
A03519-000 ............77
A08350-000-00 .......152
A08355-000-00 .......152
A08395-000-00 .......152
A08552-000-00 .......153
A08553-00X-00 .......153
A08554-000-00 .......153
A08556-000-00 . . . . . . .153
A08580-00X-00.......153
A08790-000 ...........153
A08790-001 . . . . . . . . . . . .153
A08790-002 ...........153
A08790-003 ...........153
A08790-004 ...........153
A08794-000 ...........153
A08794-001 ............153
A08794-002............153
A08794-003............153
A08867-000-00 .......152
A09888-000-00.......152
A09890-000-00.......152
A09894-001-00........152
A09894-002-00 .......152
A09894-003-00 .......152
A09894-021-00........152
A09894-022-00 .......152
A09894-023-00 .......152
A09897-000-00 .......152
A09897-024-00 .......152
A09898-000-00.......152
A09899-000-00.......152
A12053-000-00 ........152
A12165-000-00.........153
A12165-100-00 .........153
A12166-000-00 ........153
A12635-0xx-00.........155
A12636-0xx-00.........155
A12637-000-00 ........155
A12637-500-00 ........155
A12638-000-00 ........155
A12639-001-00.........155
A12639-002-00 ........155
A12663-001-00.........154
A12663-002-00 ........154
A12663-003-00 ........154
A12663-004-00 ........154
A12663-008-00 . . . . . . . .154
A12663-009-00 ........154
A12664-010-00.........154
A12667-000-00 ........154
A12667-001-00.........154
A12667-002-00 ........154
A12667-003-00 ........154
A12667-006-00 ........154
Product Index • Locks
Part No. Page Part No. Page Part No. Page Part No. Page
171
Product Index
LOCKS
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Locks • Product Index
KB797 ...................149
KB799...................149
KB905 ..................149
KB906 ..................149
KB907...................149
KC215A130 ..............163
KC215B130 ..............163
KS11D1200 ..............163
KS11F1200...............163
KS21A1200..............163
KS21D1200..............163
KS21F1200 ..............163
KS41D1200..............163
KS41F1200 ..............163
KZ11A10 .................164
KZ11D10 .................164
KZ11D20.................164
KZ11F10..................164
KZ11F40 .................164
KZ11G10 .................164
KZ11G20.................164
KZ11G40.................164
KZ12D10.................164
KZ12D20 ................164
KZ12D40 ................164
KZ12G10.................164
KZ12G20 ................164
KZ12G40 ................164
KZ13D10.................164
KZ13D20 ................164
KZ13D40 ................164
KZ13F10 .................164
KZ13F20.................164
KZ13F40 ................164
M204-198...............68
PE1396..................40
Q001-055 ...............154
Q005-085 ..............111
Q033-026...............111
Q033-066 ..............144
Q033-067...............144
Q033-069 ..............144
Q033-070...............144
Q033-071 ...............144
Q033-072 ...............145
Q033-073 ...............145
Q033-074...............145
Q033-075...............146
Q033-076...............146
Q033-077 ...............145
Q033-078...............145
Q033-079...............145
Q100-100 ...............137, 138
Q100-101 ................137, 138
Q100-102 ...............138
Q100-103................138
Q100-104 ...............143
Q100-105 ...............143
Q100-108 ...............144
Q330-041 ...............137, 138
Q330-152................109, 144
AS77310-L/RH ..........39
AS77321-L/RH ..........39
AS77360-L/RH .........39
AS77760-L/RH..........39
B202-578 ...............139
B302-041 ...............92, 120
B302-045...............92, 120
B502-873 ...............139
B520-298...............94, 122
B520-649...............93, 121
B520-650...............93, 121
B520-651 ...............152
B520-652 ...............152
B600-018...............92, 120
B600-045 ..............152
B600-046 ..............152
B600-047 ..............94, 122
B600-053 ..............94, 122
B600-066 ..............94, 122
B600-071 ...............152
B600-078 ..............94, 122
B600-100...............94, 122
B600-101................94, 122
C603-897 ...............94, 122
E77012-IB ...............40
E77012-IC . . . . . . . . . . . . . . .40
E77012-IK ...............40
E77012-IP ...............40
E77300..................40
E77301...................40
E77302 . . . . . . . . . . . . . . . . . .40
E77303 . . . . . . . . . . . . . . . . . .40
E77306..................40
E77307 ..................40
J250-028 ............... 93, 94,
121, 122
KB525...................149
KB531 ...................149
KB536...................149
KB544...................149
KB545...................149
KB565...................149
KB566 ..................149
KB567...................149
KB573 . . . . . . . . . . . . . . . . . . .149
KB574...................149
KB577 ...................149
KB578...................149
KB579...................149
KB580 ..................149
KB581 ...................149
KB582...................149
KB584 ..................149
KB590 ..................149
KB591 ...................149
KB592...................149
KB593...................149
KB751....................149
KB761 ...................149
KB771....................149
KB794...................149
A7801-xx................39
A7802-xx ...............39
A7804-xx ...............39
A7805-xx ...............39
A7806-xx ...............39
A7807-xx................39
A7808-xx ...............39
A7809-xx ...............39
A7813-xx ................39
A7814-xx . . . . . . . . . . . . . . . .39
A7815-xx ................
39
A7816-xx ................39
A7819-xx ................39
A7820-xx ...............39
A7821-xx ................39
A7822-xx................39
A7829-xx ...............39
A7830-xx ...............39
A7831-xx ................39
A7851-12-xx . . . . . . . . . . . . .39
A7851-12RX-xx..........39
A7851-24-xx ............39
A7851-24RX-xx .........39
A7881-12-xx.............39
A7881-12RX-xx..........39
A7881-24-xx ............39
A7881-24RX-xx . . . . . . . . .39
AE55012-OC ............39
AE55012-OT ............39
AE77012-IE .............40
AE77012-IT .............40
AE77012-OC ............40
AE77012-OK ............40
AE77012-OP ............40
AE77012-OT ............40
AE77029-L/RH .........39
AE77100-L/RH ..........39
AE77140-L/RH ..........39
AE77280-L/RH .........39
AE77526-L/RH..........39
AE87012-0C.............40
AE87012-0K ............40
AE87012-0T ............40
AE87012-IC..............40
AE87112-0C .............40
AE87112-0K .............40
AE87112-0T .............40
AE87212-IC..............40
AS5813..................40
AS75319.................39
AS76029-L/RH .........39
AS76100-L/RH..........39
AS76140-L/RH..........39
AS76280-L/RH .........39
AS76310-L/RH..........39
AS76319.................39
AS76321-L/RH ..........39
AS76360-L/RH .........39
AS76526-L/RH .........39
AS76760-L/RH .........39
AS76853 ...............39
A30753-00 .............53, 67
A30753-01 ..............53, 67
A30756-000-00 .......69
A30756-001-00 ........69
A30758-000-00 .......69
A30758-001-00 ........69
A30759-000-00 .......69
A30759-001-00 ........69
A30760-000-00 .......69
A30760-001-00 . . . . . . . .69
A30761-000-00 . . . . . . . .69
A30765-000-00 .......69
A30767-000-00........69
A30767-001-00 ........69
A30769-000-00 .......69
A30769-001-00 ........69
A30773-000-00........69
A30773-001-00.........69
A30775-000-00........68
A30780-000-00 .......68
A30780-001-00 ........68
A30905-001-00........54
A30905-060-00 .......54
A30906-001-00........68
A30906-060-00 .......68
A30906-070-00 .......54, 68
A30913-000-00........54, 68
A30913-001-00.........54, 68
A30915-000-00........68
A30915-001-00.........68
A31517-000-00 .........69
A31517-001-00..........69
A31518-000-00.........69
A31518-001-00 .........69
A31544-00* ............53
A31544-00..............67
A31706-000-00 . . . . . . . .101
A31707-000-00 ........101
A31707-002-00.........101
A31708-000 ............101
A31708-001 .............101
A31708-002 ............101
A31708-003 ............101
A31709-000-00 . . . . . . . .101
A31709-001-00.........101
A31714-000-00.........101
A31714-001-00..........101
A31715-000-00 .........101
A31715-001-00..........101
A31716-000-00.........101
A31716-001-00..........101
A31739-000 ............101
A31739-001 .............101
A31750-000 ............101
A31750-001 .............101
A31751-000 .............101
A31751-001 ..............101
A31764-000 ............101
A31767-000.............102
A48553-00X-00 .......153
A48580-00X-00 .......153
Part No. Page Part No. Page Part No. Page Part No. Page
172
Product Index LOCKS
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Product Index • Locks
Q500-070 ..............91, 143
Q500-071 ...............144
Q500-071-5C ...........144
Q500-072...............119, 143
Q630-246...............84
Q630-254...............84
Q630-276...............84
Q630-277 ...............84
Q630-278...............84
Q630-279...............84
Q630-288 ..............84
Q630-289 ..............84
Q630-312 ...............84
R525-256 ...............94, 122
S206-504...............139
S76012 ..................39
S76206 .................40
S76300 .................40
S76301 ..................40
S76302..................40
S76303..................40
S76306 .................40
S76307..................40
S76802 .................40
S76806 .................40
S76816 ..................40
Q330-431 LAT ..........67
Q330-431 LON ..........67
Q330-432 BRK..........67
Q330-432 BRW.........67
Q330-432 LAT ..........67
Q330-432 LON..........67
Q330-433 BRK..........67
Q330-433 BRW.........67
Q330-433 LAT ..........67
Q330-433 LON..........67
Q500-010...............119, 143
Q500-012 ...............119, 143
Q500-014...............119, 143
Q500-021 ...............91, 143
Q500-022 ..............143
Q500-046 ..............91, 143
Q500-047 ..............143
Q500-054 ..............91, 143
Q500-055 ..............143
Q500-056 ..............119, 143
Q500-057...............119, 143
Q500-058 ..............91, 143
Q500-059 ..............91, 143
Q500-064 ..............91, 143
Q500-065 ..............143
Q500-065-5C ..........144
Q500-066 ..............91, 143
Q500-067 ..............119, 143
Q500-069 ..............119, 143
Q330-249...............145
Q330-250...............145
Q330-251................146
Q330-253 . . . . . . . . . . . . . . .120
Q330-254...............120
Q330-256...............92
Q330-257 ...............92
Q330-270 ...............68
Q330-271................68
Q330-272 ...............54
Q330-273 ...............54
Q330-276 ...............149
Q330-282...............111
Q330-306...............82
Q330-310 ...............82
Q330-311 ................82
Q330-391 ...............82
Q330-392...............84
Q330-393...............84
Q330-394...............84
Q330-396...............82
Q330-397 ...............82
Q330-399...............84
Q330-430 BRK .........67
Q330-430 BRW.........67
Q330-430 LAT..........67
Q330-430 LON .........67
Q330-431 BRK ..........67
Q330-431 BRW .........67
Q330-154 ...............109, 143
Q330-156 ...............146
Q330-158 ...............145
Q330-160 ...............146
Q330-164 ...............111, 152
Q330-166 ...............145
Q330-168 ...............111, 154
Q330-169 ...............111, 154
Q330-170 ...............111
Q330-175................120, 138
Q330-176................92
Q330-177 ................120, 138
Q330-178................92
Q330-179................111
Q330-182 ...............111
Q330-210 ...............145
Q330-215................149
Q330-237 ...............144
Q330-238...............143
Q330-239...............146
Q330-240...............145
Q330-241 ...............145
Q330-242...............145
Q330-243...............146
Q330-245...............144
Q330-245-5 ............144
Q330-246...............143
Q330-247 ...............146
Q330-248...............145
Part No. Page Part No. Page Part No. Page Part No. Page
173
Prices subject to change without notice
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Exit Devices Table Of Contents
EXITS
Finishes......................................................174
General Exit Device Information ...........................174
Factors Affecting Exit Devices .............................175
New Nomenclature Conversion Chart .....................176
How to Order ............................................177-178
Exit Device
Pushpad Architectural Heavy Duty
25-R Series ..............................................180-181
25-V Series...............................................182-183
25-M Series ..............................................184-185
25-C Series...............................................186-187
25-C-WDC Series.........................................188-189
25 Series Device Options .................................190-191
25 Series Trims............................................... 192
25 Series Device Accessories..............................192-195
25 Series Device and Trim Parts .........................196-200
2
4-R Series................................................ 216-217
24-V Series ..............................................218-219
24-C Series...............................................220-221
24-C-CWDC Series .......................................222-223
24 Series Device Options .....................................224
24 Series Trims...............................................225
24 Series Device Accessories.............................226-228
24 Series Device and Trim Parts ......................... 229-233
Puahpad Commercial Medium Duty
19-R Series.............................................. 246-247
19-V Series ..............................................248-249
19 Series Device Options......................................250
19 Series Trims ............................................... 251
19 Series Device Accessories .............................252-254
19 Series Device and Trim Parts..........................255-256
20 Series Devices and Trims ..................................264
1490 Series and Device Options/Accessories.............265-266
1590 Series and Device Options/Accessories .............267-268
1490/1590 Device Parts ......................................269
1690 Series and Device Options/Accessories..............277-278
1690 Device Parts ............................................279
1790 Series and Devcie Options/Accessories .............282-283
1790 Device Parts ............................................284
Crossbar Wide Stile
XX-R Series .............................................286-287
XX-V Series .............................................288-289
XX-M Series............................................. 290-291
XX-C Series .............................................292-293
XX-CWDC Series ........................................294-295
XX Series Device Options.....................................296
XX Series Trims .........................................297-298
XX Series Device Accessories ............................299-300
XX Series Device and Trim Parts ......................... 301-303
Crosbar Narrow Stile
1990 Series and Device Options/Accessories.............. 316-317
1990 Device Parts ............................................ 318
2090 Series and Device Options/Accessories .............322-323
2090 device Parts............................................324
Recessed Concealed Vertical Mid-Panel
2390 Series and Devcice Options/Accessories ................328
2390 Device Parts............................................330
Exit Device Accessories
Mullions and Mullion Parts ...................................334
Sex Bolts.....................................................335
Delayed Egress...............................................335
Numerical Index.........................................336-338
174
Prices subject to change without notice
Price Book 7
Effective May 4, 2019 • Rev. 05/19
EXITS
Exit Device Finishes
General Information (Specific to the Falcon 19, 24, 25, and XX series exit devices)
All products listed meet ANSI A156.3 Grade 1 standard.
Devices will be furnished for hollow metal doors 3'0" x 7'0" x 1-3/4" full flush, with 5/8" high frame stops unless specified otherwise.
DOOR WIDTHS
EXIT DEVICES for door widths exceeding 4'0" are custom applications. Specify the exact door width and consult factory for price
and availability. For device widths on narrow stile aluminum and glass doors, consult factory.
DOOR THICKNESS
EXIT DEVICES are furnished at prices listed for door thicknesses of 1 3/4" with standard centerlines. Other door thicknesses and/or
offset installations may require additional charges for the device, trim, control and/or strike. Consult factory.
DOOR HEIGHTS/DEVICE CENTERLINE
SURFACE and CONCEALED VERTICAL ROD DEVICES for heights over 7'0" up to 8'0", extension rods are furnished at no
additional charge. For heights over 8'0" up to 10'0" extension rods are furnished at prices shown on specific device parts pages.
For doors higher than 10'0" or when centerline is other than standard, specify exact height. Consult factory for price.
86 OR 161 DOOR PREPARATIONS
When devices will apply over a 86 or 161 door preparation, consult factory.
DEVICE MOUNTING SCREWS
Machine screws are furnished with Fire Exit Devices. Sheet metal screws are furnished with Panic Devices. Machine screws can be
substituted at no additional charge, specify AMS.
SUBSTITUTION OF OUTSIDE TRIM OR STRIKES
When other than standard is desired, deduct price of standard and add price of item used. Check catalog for compatibility. Lever trim
is furnished standard Dane. Optional lever designs of Avalon, Quantum, and Sutro are available at no additional charge.
ELECTRIC ACCESSORIES
When specifying Electrical Products, consult catalog or factory to ensure all coordinating accessories have been considered. All
electric devices must use respective power supply for warranty to apply.
US BHMA Finish Color Description
SP28 689 Silver Painted (Resembles Aluminum Finish)
P13/SP313 695 Dark Bronze Painted (Spray Duranodic)
P35 622 Flat Black Painted
US3 605/666 Brass, Polished
US4 606/667 Brass, Satin
US9 611/705 Bronze, Polished
US10 612/668 Bronze, Satin
US11 643e Aged Bronze
US10B 613/703 Bronze, Oil-Rubbed Satin
US15 619/670 Nickel, Satin
US19 622 Flat Black Painted
US26 625/672 Chrome, Polished
US26D 626/702 Chrome, Satin
US32 629 Stainless Steel, Polished
US32D 630 Stainless Steel, Satin
US28 628 Anodized Aluminum, Clear (Satin)
DC13 / 313AN 710 Anodized Aluminum, Duranodic Dark Bronze
DC35 711 Anodized Aluminum, Flat Black
USP 600 Prime Coat
REFERENCE NOTES:
1) Material substrate varies by device component, US and BHMA code used represents overall nish appearance of assembled device.
2) SP28 and SP313 contain certain exposed parts that are molded from black plastic material or black powder coated nish.
3) When split nish is desired, the nish listed rst is understood to be the outside nish.
4) See specic device pages for available nishes by device.
175
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Prices subject to change without notice
EXITS
Factors Affecting Exit Devices
A Door Width
Specify exact door width. This determines what size device
is supplied. If door width not specified, 3' is furnished
standard.
B Stile Width
Determines which series can be used because of the
dimension of the active or inactive case. In conjunction with
the door width, the width of the device is also affected.
C Door Height
Rod lengths and extension rod requirements for surface
vertical or concealed vertical rod devices are determined by height.
D Undercut
Bottom rods and bottom latches or bolts for vertical rod applications are
affected by the distance between the bottom of the door and the surface
to which the strike will apply; 1/4" minimum, 3/4" maximum.
E Thickness
When trim is used with a device it is affected by thickness
as is the length of fasteners and cylinders.
F Stop Height
The type of strike and affect on backsets is
determined by the stop (5/8" standard)
Glass Bead
In the case of touch bar devices, series 19, 24 and 25,
glazing bead or trim can interfere with the device requiring
shim kits with modified trim and/or device.
Fire Labels
As a component of a fire door assembly, exit devices must
meet special requirements.
Other
Factors such as transom panels, sill conditions and
astragals can affect exit device selection.
Pairs
When devices will occur on paired door leaves, order them together.
Materials
Unusual door or frame materials can affect device selection
such as channel iron frames, blade stop frames, hollow core doors and
mineral core doors.
A
C
E
B
D
F
(To finished floor)
Handing Diagrams
Same Egress – Double Door
Double Egress – Double Door
Single Door
Single Door
176
Prices subject to change without notice
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Conversion Table
17 Series to 24 Series 18 Series to 25 Series
OldNew Trim OldNew Trim
(F)17-R (F)24-R No Change (F)18-R (F)25-
RS
ee Below
(F)17-V (F)24-V No Change (F)18-V (F)25-
VS
ee Below
(F)17-C (F)24-C No Change (F)18-C (F)25-
CS
ee Below
(F)17-C-WDC (F)24-C-WDC No Change (F)18-C-WDC(F)25-C-WDC See Below
(F)18-M (F)25-
MS
ee Below
18 Series to 25 Series Trim
Old Old Trim NewOld Old Tri
mN
ew
812L Lever Trim 510L 810TP Apollo 512TP
812L-NL Lever Trim510L-NL 810NLApoll
o5
12NL
812L-DT Lever Trim 510L-DT810DT Apollo 512DT
812L-BE Lever Trim 510L-BE 810TP-BE Apollo 512TP-BE
816L Vandal Resistant 511L 811KKno
b5
13K
820TP Vanguard 512TP811K-NL Knob 513K-NL
820NL Vanguard 512NL 811K-DT Knob 513K-DT
820DT Vanguard 512DT811K-BE Knob 513K-BE
820TP-BE Vanguard 512TP-BE 717DT Delta 717DT
814KILKey in Leve
rD
iscontinued
17/18 Strikes to 24/25 Strikes
OldNew 24 Series 25 Series Comments
F490299 XX Need 650106 retrofit kit for existing prep
F490299FXX Need 650106 retrofit kit for existing prep
565 1439 XX
F570299 XX Need 650106 retrofit kit for existing prep
F570299FXX Need 650106 retrofit kit for existing prep
5711609XX
5791606Not recommended X
No Equivalent 499F Not offeredX
No Equivalent 264 XX
Power Supply
OldNew
LUT-2 PS861
RDS-2 (17/18 ELR) PS873-2 (24/25 EL Only)
Conversion Table
19 Series Trim Changes
Old New Trim/Control Old New Trim/Control
1953DT 920DT Trident 1910L-NL 912L-NL-Dane Control
1955P 920NL Trident 1920L LS/LK 912L-BE-Dane Control
1904 PULL ONLY 917DT Centron 1980L-DT 912L-DT-Dane Control
2301BE 930EO Centron 1919L 912L-Quantum Control
2303DT 930DT Centron 1919L-NL 912L-NL-Quantum Control
2302C 930C Centron 1929L LS/LK 912L-BE-Quantum Control
2305P 930NL Centron 1989L-DT 912L-DT-Quantum Control
1907K 911K Control 1912L 912L-Sutro Control
1907K-NL 911K-NL Control 1912L-NL 912L-NL-Sutro Control
1927K LS/LK 911K-BE Control 1922L-BE 912L-BE-Sutro Control
1937K-DT 911K-DT Control 1982L-DT 912L-DT-Sutro Control
1911L 912L Control 2400KIL w/IC Core 914KIL-IC Key in Lever
1911L-NL 912L-NL Control 2400KIL 914KIL-KD Key in Lever
1921L LS/LK 912L-BE Control 2401KIL LS/LK 914KIL-BE Key in Lever
1981LDT 912L-DT Control 2402KIL-NL 914KIL-NL-KD Key in Lever
1910L 912L-Dane Control
EXITS
177
Prices subject to change without notice
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Exit Device - How to Order
How to Order Sequence Example
MEL F 25 V L-DANE US3 3' LHR LBR SNB WD
Prefixes
AX Accessible Device (25 and 19 Series Only)
CD Cylinder Dogging
LD Less Dogging
RX Touchbar Request to Exit
DM Latchbolt Monitor Switch - when fully extended
LM Latchbolt Monitor Switch - when fully retracted
KOR Key Bypass Switch
EL Electric Latch Retraction
MEL Motorized Electric Latch Retraction
FSA Electric Lock or Unlock Trim-Fail Safe
(25 Series Only)
FSE Electric Lock or Unlock Trim-Fail Secure
(25 Series Only)
EA Exit Alarm
Rating
F Fire Exit Hardware
Blank Panic Exit Hardware
Device Series
19 Touch Bar Device, Narrow Stile
24 Touch Bar Device, Narrow Stile
25 Touch Bar Device
XX Crossbar Device
Device Type
R Rim C Concealed Vertical rod
V Surface Vertical Rod C-WDC Concealed Vertical rod
M Mortise Wood Door
Trim Function (see Trim pages for all functions)
EO Exit Only K Knob
DT Dummy Trim L Lever (Dane Standard)
NL Night Latch TL Thumb Lever
C Cylinder Trim Plate NL-OP Night Latch Pull by other
TP Thumbpiece KIL Key in Lever
Latch Option
DL Dead Locking
Finish
US3 US10 US15* US26 US32 SP28
US4 643E* US19* US26D US32D SP313 313AN
Door Width
3' Standard Default
4'
2'
Handing
RHR Right Hand Reverse
LHR Left Hand Reverse
Less Bottom Rod
LBR Less Bottom Rod
LBR-AFL LBR w/Auxiliary Fire Pin
Accessories
CYL Cylinder SNB Sex Bolts AMS All Machine Screws
SK Shim Kit SLM SLM Blocking
Other Miscellaneous Door Information
HMD Hollow Metal Door SCDC Steel Channel Door Construction _ Door Label (20 min, 45 min, 90 min 1-1/2 hr)
HMF Hollow Metal Frame _ Specify other Door or Frame _ Stile Width
WD Wood Door Material information _ Frame Stop Height
WDF Wood Frame _ Door Height SGL Single Door
ALD Aluminum Door _ Door Thickness PR Pair of Doors Swinging Same Direction
ALF Aluminum Frame _ Door Undercut DE Double Egress Doors
CPD Composite Door _ CON Allegion Connect
Door Thickness
1-3/4" Standard
2-1/4" Optional
Not all options are available on all series, consult customer service.
For Special Order Product Quotes: Email: vdi_specials@allegion.com Fax: 1-877-730-6248
EXITS
*643E, US15 and US 19 are available on select 24 and 25 Series
178
Prices subject to change without notice
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Trim - How to Order
How to Order Sequence Example
510 L - R US26D LHR SUTRO FSE CYL
Trim Series
D24 Series D25 Series 19 Series XX Series
711 510 911 711
712 511 912 712
715 512 914 717
717 513 917 718
718 717 918 810
718 920 811
930 812
815
816
820
Trim Function (see Trim pages for all functions)
EO Exit Only
DT Dummy Trim
NL Night Latch
C Cylinder Trim Less Pull
TP Thumbpiece
K Knob
L Lever (Dane Standard)
KIL Key in Lever
TL Thumb Lever
Device Type
R Rim
V Surface Vertical Rod
M Mortise
C Concealed Vertical Rod (includes WDC)
Finish
US3 US10 643E* US19* US26D SP313
US4 US10B US15* US26 SP28 US32 US32D
Handing
RHR Right Hand Reverse
LHR Left Hand Reverse
Lever Style
DANE (DAN) supplied standard if not specified BROADWAY (BRW)* (available on 24 and 25 Series only)
SUTRO (SUT) DANISH (DSH)* (available on 24 and 25 Series only)
QUANTUM (QUA) LATITUDE (LAT)* (available on 24 and 25 Series only)
AVALON (AVA) (available on 24, 25 and xx Series only) LONGITUDE (LON)* (available on 24 and 25 Series only)
BOARDWALK (BRK)* (available on 24 and 25 Series only)
Trim Options
FSA Electric Lock or Unlock-Fail Safe (FSA device required)
FSE Electric Lock or Unlock-Fail Secure (FSE device required)
CON Allegion Connect
Other Information or Accessories
CYL Include Cylinder with Trim
KD Cylinder Keyed Different
Door Thickness
Specify door thickness other than 1-3/4"
EXITS
*New finishes and levers are available on select 24 and 25 Series.
179
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Prices subject to change without notice
EXITS
Notes
Discount Policy on Von Duprin and Falcon Common Products and Parts:
• Von Duprin discount applies on products and parts, such as power supplies, power transfers, and other parts or accessories
common to both brands.
• Customers not open to Von Duprin product will receive a minimum buying program with a 50% multiplier.
180
Prices subject to change without notice
25 Series Architectural /
Heavy Duty Pushpads EXITS
Price Book 7
Effective May 4, 2019 • Rev. 05/19
25-R Device Series
3' Devices are priced with standard trim and strike, 4' add $19 list.
Cylinders are not included in the price.
EXIT HARDWARE
Rim Devices
(Price includes 299 Strike)
Trim/Control US28 US32D 313AN
US19*
US26D US26 US32 US10 US4
US3
643E*
US15*
* 25-R-EO ―869 1081 921 1059 1102 1124 1102 1124 1239
* 25-R-NL-OP (Supplied as NL less trim) 869 1081 921 1059 1102 1124 1102 1124 1239
Lever - Dane (handed and eld reversible)
* 25-R-L 510L* 1194 1464 1246 1442 1491 1513 1427 1449 1628
* 25-R-L-BE 510L-BE* 1194 1464 1246 1442 1491 1513 1427 1449 1628
* 25-R-L-NL 510L-NL* 1129 1387 1181 1365 1459 1481 1362 1384 1596
* 25-R-L-DT 510L-DT* 1129 1387 1181 1365 1459 1481 1362 1384 1596
VR Lever (handed and eld reversible)
* 25-R-L 511L* 1252 1518 1304 1496 1548 1570 1485 1507 1685
Thumbpiece (non-handed)
25-R-TP 512TP 1159 1401 1211 1379 1478 1500 1392 1414 1615
25-R-TP-BE 512TP-BE 1159 1401 1211 1379 1478 1500 1392 1414 1615
* 25-R-NL 512-NL* 1104 1337 1156 1315 1405 1427 1337 1359 1542
Knob (non-handed)
25-R-K 513K 1115 1367 1167 1345 1438 1460 1348 1370 1575
25-R-K-BE 513K-BE 1115 1367 1167 1345 1438 1460 1348 1370 1575
25-R-K-NL 513K-NL 1115 1367 1167 1345 1438 1460 1348 1370 1575
25-R-K-DT 513K-DT 1115 1367 1167 1345 1438 1460 1348 1370 1575
DT Pull (717 handed and eld reversible, 512 non-handed)
25-R-DT 717DT 1048 1337 1140 1315 1358 1380 1281 1303 1495
25-R-DT 512DT 1067 1281 1119 1259 1405 1427 1300 1322 1542
* These devices and 510L, 510L-BE, 510L-NL, 510L-DT, 511L, 512NL trims are available in 643E, US15, and US19 nishes.
REFERENCE NOTES:
25 Series ordered in 313AN will be supplied with trims in SP313.
Handing: 25-R Device is non-handed. Trims are furnished RHR when handing is not specied.
Sex Bolts:
Optional Sex Bolts are recommended for center case mounting when device is used with hollow core wood,
composite or light gauge hollow metal doors. See chart below for quantities and list prices.
Application
Sex Bolt 425
(Optional) List Add
Hollow core wood, composite, or light gauge hollow metal doors - EO (exit only device) 8 96
Hollow core wood, composite, or light gauge hollow metal doors - Device x Trim 4 48
181
Prices subject to change without notice
25 Series
Architectural /
Heavy Duty
PushpadsEXITS
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Device Series F-25-R
FIRE EXIT HARDWARE
Rim Devices
(Price includes 299F Strike)
Trim/Control US28 US32D 313AN
US19*
US26D US26 US32 US10 US4
US3
643E*
US15*
* F-25-R-EO 1073 1285 1125 1263 1306 1328 1306 1328 1443
* F-25-R-NL-OP (Supplied as NL less trim) 1073 1285 1125 1263 1306 1328 1306 1328 1443
Lever - Dane (handed and eld reversible)
* F-25-R-L 510L* 1398 1668 1450 1646 1695 1717 1631 1653 1832
* F-25-R-L-BE 510L-BE* 1398 1668 1450 1646 1695 1717 1631 1653 1832
* F-25-R-L-NL 510L-NL* 1333 1591 1385 1569 1663 1685 1566 1588 1800
* F-25-R-L-DT 510L-DT* 1333 1591 1385 1569 1663 1685 1566 1588 1800
VR Lever (handed and eld reversible)
* F-25-R-L 511L* 1456 1722 1508 1700 1752 1774 1689 1711 1889
Thumbpiece (non-handed)
F-25-R-TP 512TP 1363 1605 1415 1583 1682 1704 1596 1618 1819
F-25-R-TP-BE 512TP-BE 1363 1605 1415 1583 1682 1704 1596 1618 1819
* F-25-R-NL 512-NL* 1308 1541 1360 1519 1609 1631 1541 1563 1746
Knob (non-handed)
F-25-R-K 513K 1319 1571 1371 1549 1642 1664 1552 1574 1779
F-25-R-K-BE 513K-BE 1319 1571 1371 1549 1642 1664 1552 1574 1779
F-25-R-K-NL 513K-NL 1319 1571 1371 1549 1642 1664 1552 1574 1779
F-25-R-K-DT 513K-DT 1319 1571 1371 1549 1642 1664 1552 1574 1779
DT Pull (717 handed and eld reversible, 512 non-handed)
F-25-R-DT 717DT 1252 1541 1344 1519 1562 1584 1485 1507 1699
F-25-R-DT 512DT 1271 1485 1323 1463 1609 1631 1504 1526 1746
* These devices and 510L, 510L-BE, 510L-NL, 510L-DT, 511L, 512NL trims are available in 643E, US15, and US19 nishes.
REFERENCE NOTES:
25 Series ordered in 313AN will be supplied with trims in SP313.
Handing: F-25-R Device is non-handed. Trims are furnished RHR when handing is not specied.
Sex Bolts:
Sex Bolts are supplied for center case mounting when device is used with wood,
composite or non-reinforced hollow metal doors. See chart below for quantities.
Application
Sex Bolt 425
(Supplied)
Wood, composite or non-reinforced hollow metal doors - EO (exit only device) 8
Wood, composite or non-reinforced hollow metal doors - Device x Trim 4
3' Devices are priced with standard trim and strike, 4' add $19 list.
Cylinders are not included in the price.
182
Prices subject to change without notice
25 Series Architectural /
Heavy Duty Pushpads EXITS
Price Book 7
Effective May 4, 2019 • Rev. 05/19
25-V Device Series
3' Devices are priced with standard trim and strikes, 4' add $19 list and 2' add $123 list.
Cylinders are not included in the price.
EXIT HARDWARE
Surface Vertical Rod Devices
(Includes 3788 & 2130 Strikes )
Trim/Control US28 US32D 313AN
US19*
US26D US26 US32 US10 US4
US3
643E*
US15*
* 25-V-EO 1263 1583 1342 1542 1607 1638 1607 1638 1730
* 25-V-NL-OP (Supplied as NL less trim) 1263 1583 1342 1542 1607 1638 1607 1638 1730
Lever - Dane (handed and eld reversible)
* 25-V-L 510L* 1588 1966 1667 1925 1996 2027 1932 1963 2119
*25-V-L-BE 510L-BE* 1588 1966 1667 1925 1996 2027 1932 1963 2119
* 25-V-L-NL 510L-NL* 1523 1889 1602 1848 1964 1995 1867 1898 2087
* 25-V-L-DT 510L-DT* 1523 1889 1602 1848 1964 1995 1867 1898 2087
VR Lever (handed and eld reversible)
* 25-V-L 511L* 1646 2020 1725 1979 2053 2084 1990 2021 2176
Thumbpiece (non-handed)
25-V-TP 512TP 1553 1903 1632 1862 1983 2014 1897 1928 2106
25-V-TP-BE 512TP-BE 1553 1903 1632 1862 1983 2014 1897 1928 2106
* 25-V-NL 512-NL* 1498 1839 1577 1798 1910 1941 1842 1873 2033
Knob (non-handed)
25-V-K 513K 1509 1869 1588 1828 1943 1974 1853 1884 2066
25-V-K-BE 513K-BE 1509 1869 1588 1828 1943 1974 1853 1884 2066
25-V-K-NL 513K-NL 1509 1869 1588 1828 1943 1974 1853 1884 2066
25-V-K-DT 513K-DT 1509 1869 1588 1828 1943 1974 1853 1884 2066
DT Pull (717 handed and eld reversible, 512 non-handed)
25-V-DT 717DT 1442 1839 1561 1798 1863 1894 1786 1817 1986
25-V-DT 512DT 1461 1783 1540 1742 1910 1941 1805 1836 2033
* These devices and 510L, 510L-BE, 510L-NL, 510L-DT, 511L, 512NL trims are available in 643E, US15, and US19 nishes.
REFERENCE NOTES:
25 Series ordered in 313AN will be supplied with trims in SP313.
25-V Device ordered in US15 will be supplied with US32D Rod and Latch Cover.
Handing: The 25-V Device is handed and eld reversible. Trims are furnished RHR when handing is not specied.
Extension Rods: For door heights over 7'0" up to 8'0", 12" extension rods are furnished at no additional charge at the time of device order.
For door heights over 8'0" up to 10'0" extension rods are furnished at prices shown in parts section with the device at the time of order.
MUST specify door height on order line.
Sex Bolts:
Optional Sex Bolts are recommended for center case and latch mounting when device is used with hollow core wood,
composite or light gauge hollow metal doors. See chart below for quantities and list prices.
Application
Latches
Sex Bolt 2729
(Optional)
Device
Sex Bolt 425
(Optional) List Add
Hollow core wood, composite or light gauge hollow metal doors - EO (exit only device) 6 6 126.00
Hollow core wood, composite or light gauge hollow metal doors - Device x Trim 6 2 78.00
Hollow core wood, composite or light gauge hollow metal doors - EO (exit only device) LBR 3 6 99.00
Hollow core wood, composite or light gauge hollow metal doors - Device x Trim LBR 3 2 51.00
183
Prices subject to change without notice
25 Series
Architectural /
Heavy Duty
PushpadsEXITS
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Device Series F-25-V
3' Devices are priced with standard trim and strikes, 4' add $19 list and 2' add $123 list.
Cylinders are not included in the price.
FIRE EXIT HARDWARE
Surface Vertical Rod Devices
(Includes 3788 & 2130 Strikes )
Trim/Control US28 US32D 313AN
US19*
US26D US26 US32 US10 US4
US3
643E*
US15*
* F-25-V-EO 1451 1771 1530 1730 1795 1826 1795 1826 1918
* F-25-V-NL-OP (Supplied as NL less trim) 1451 1771 1530 1730 1795 1826 1795 1826 1918
Lever - Dane (handed and eld reversible)
* F-25-V-L 510L* 1776 2154 1855 2113 2184 2215 2120 2151 2307
* F-25-V-L-BE 510L-BE* 1776 2154 1855 2113 2184 2215 2120 2151 2307
* F-25-V-L-NL 510L-NL* 1711 2077 1790 2036 2152 2183 2055 2086 2275
* F-25-V-L-DT 510L-DT* 1711 2077 1790 2036 2152 2183 2055 2086 2275
VR Lever (handed and eld reversible)
* F-25-V-L 511L* 1834 2208 1913 2167 2241 2272 2178 2209 2364
Thumbpiece (non-handed)
F-25-V-TP 512TP 1741 2091 1820 2050 2171 2202 2085 2116 2294
F-25-V-TP-BE 512TP-BE 1741 2091 1820 2050 2171 2202 2085 2116 2294
* F-25-V-NL 512-NL* 1686 2027 1765 1986 2098 2129 2030 2061 2221
Knob (non-handed)
F-25-V-K 513K 1697 2057 1776 2016 2131 2162 2041 2072 2254
F-25-V-K-BE 513K-BE 1697 2057 1776 2016 2131 2162 2041 2072 2254
F-25-V-K-NL 513K-NL 1697 2057 1776 2016 2131 2162 2041 2072 2254
F-25-V-K-DT 513K-DT 1697 2057 1776 2016 2131 2162 2041 2072 2254
DT Pull (717 handed and eld reversible, 512 non-handed)
F-25-V-DT 717DT 1630 2027 1749 1986 2051 2082 1974 2005 2174
F-25-V-DT 512DT 1649 1971 1728 1930 2098 2129 1993 2024 2221
* These devices and 510L, 510L-BE, 510L-NL, 510L-DT, 511L, 512NL trims are available in 643E, US15, and US19 nishes.
REFERENCE NOTES:
25 Series ordered in 313AN will be supplied with trims in SP313.
25-V Device ordered in US15 will be supplied with US32D Rod and Latch Cover.
Handing: The F-25-V Device is handed and eld reversible. Trims are furnished RHR when handing is not specied.
Extension Rods: For door heights over 7'0" up to 8'0", 12" extension rods are furnished at no additional charge at the time of device order.
For door heights over 8'0" up to 10'0" extension rods are furnished at prices shown in parts section with the device at the time of order.
MUST specify door height on order line.
Sex Bolts:
Sex Bolts are supplied for center case mounting and latch mounting when device is used with wood,
composite or non-reinforced hollow metal doors. See chart below for quantities.
Application
Latches
Sex Bolt 2729
(Supplied)
Device
Sex Bolt 425
(Supplied)
Wood, composite or non-reinforced hollow metal doors - EO (exit only device) 6 6
Wood, composite or non-reinforced hollow metal doors - Device x Trim 6 2
Wood, composite or non-reinforced hollow metal doors - EO (exit only device) LBR 3 6
Wood, composite or non-reinforced hollow metal doors - Device x Trim LBR 3 2
184
Prices subject to change without notice
25 Series Architectural /
Heavy Duty Pushpads EXITS
Price Book 7
Effective May 4, 2019 • Rev. 05/19
25-M Device Series
3' Devices are priced with standard trim and strike, 4' add $19 list.
Cylinders are not included in the price.
EXIT HARDWARE
Mortise Lock Devices
(Includes 1279 Strike)
Trim/Control US28 US32D 313AN
US19*
US26D US26 US32 US10 US4
US3
643E*
US15*
* 25-M-EO ―1148 1433 1219 1404 1462 1489 1463 1492 1577
* 25-M-NL-OP (Supplied as NL less trim) 1148 1433 1219 1404 1462 1489 1463 1492 1577
Lever - Dane
* 25-M-L 510L* 1473 1816 1544 1787 1851 1878 1788 1817 1966
* 25-M-L-BE 510L-BE* 1473 1816 1544 1787 1851 1878 1788 1817 1966
* 25-M-L-NL 510L-NL* 1408 1739 1479 1710 1819 1846 1723 1752 1934
* 25-M-L-DT 510L-DT* 1408 1739 1479 1710 1819 1846 1723 1752 1934
VR Lever
* 25-M-L 511L* 1531 1870 1602 1841 1908 1935 1846 1875 2023
Thumbpiece
25-M-TP 512TP 1438 1753 1509 1724 1838 1865 1753 1782 1953
25-M-TP-BE 512TP-BE 1438 1753 1509 1724 1838 1865 1753 1782 1953
* 25-M-NL 512-NL* 1383 1689 1454 1660 1765 1792 1698 1727 1880
Knob
25-M-K 513K 1394 1719 1465 1690 1798 1825 1709 1738 1913
25-M-K-BE 513K-BE 1394 1719 1465 1690 1798 1825 1709 1738 1913
25-M-K-NL 513K-NL 1394 1719 1465 1690 1798 1825 1709 1738 1913
25-M-K-DT 513K-DT 1394 1719 1465 1690 1798 1825 1709 1738 1913
DT Pull
25-M-DT 717DT 1327 1689 1438 1660 1718 1745 1642 1671 1833
25-M-DT 512DT 1346 1633 1417 1604 1765 1792 1661 1690 1880
* These devices and 510L, 510L-BE, 510L-NL, 510L-DT, 511L, 512NL trims are available in 643E, US15, and US19 nishes.
REFERENCE NOTES:
25 Series ordered in 313AN will be supplied with trims in SP313.
Handing: The 25-M Device is handed and not eld reversible. Specify handing RHR or LHR.
Sex Bolts:
Optional Sex Bolts are recommended for center case and latch mounting when device is used with hollow core wood,
composite or light gauge hollow metal doors. See chart below for quantities and list prices.
Application
Device
Sex Bolt 425
(Optional) List Add
Hollow core wood, composite or light gauge hollow metal doors - EO (exit only device) 672
Hollow core wood, composite or light gauge hollow metal doors - Device x Trim 224
185
Prices subject to change without notice
25 Series
Architectural /
Heavy Duty
PushpadsEXITS
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Device Series F-25-M
3' Devices are priced with standard trim and strike, 4' add $19 list.
Cylinders are not included in the price.
FIRE EXIT HARDWARE
Mortise Lock Devices
(Includes 1279 Strike)
Trim/Control US28 US32D 313AN
US19*
US26D US26 US32 US10 US4
US3
643E*
US15*
* F-25-M-EO ―1336 1621 1407 1592 1650 1677 1651 1680 1765
* F-25-M-NL-OP (Supplied as NL less trim) 1336 1621 1407 1592 1650 1677 1651 1680 1765
Lever - Dane
* F-25-M-L 510L* 1661 2004 1732 1975 2039 2066 1976 2005 2154
* F-25-M-L-BE 510L-BE* 1661 2004 1732 1975 2039 2066 1976 2005 2154
* F-25-M-L-NL 510L-NL* 1596 1927 1667 1898 2007 2034 1911 1940 2122
* F-25-M-L-DT 510L-DT* 1596 1927 1667 1898 2007 2034 1911 1940 2122
VR Lever
* F-25-M-L 511L* 1719 2058 1790 2029 2096 2123 2034 2063 2211
Thumbpiece
F-25-M-TP 512TP 1626 1941 1697 1912 2026 2053 1941 1970 2141
F-25-M-TP-BE 512TP-BE 1626 1941 1697 1912 2026 2053 1941 1970 2141
* F-25-M-NL 512-NL* 1571 1877 1642 1848 1953 1980 1886 1915 2068
Knob
F-25-M-K 513K 1582 1907 1653 1878 1986 2013 1897 1926 2101
F-25-M-K-BE 513K-BE 1582 1907 1653 1878 1986 2013 1897 1926 2101
F-25-M-K-NL 513K-NL 1582 1907 1653 1878 1986 2013 1897 1926 2101
F-25-M-K-DT 513K-DT 1582 1907 1653 1878 1986 2013 1897 1926 2101
DT Pull
F-25-M-DT 717DT 1515 1877 1626 1848 1906 1933 1830 1859 2021
F-25-M-DT 512DT 1534 1821 1605 1792 1953 1980 1849 1878 2068
* These devices and 510L, 510L-BE, 510L-NL, 510L-DT, 511L, 512NL trims are available in 643E, US15, and US19 nishes.
REFERENCE NOTES:
25 Series ordered in 313AN will be supplied with trims in SP313.
Handing: The F-25-M Device is handed and not eld reversible. Specify handing RHR or LHR.
Sex Bolts:
Optional Sex Bolts are supplied for center case mounting when device is used with hollow core wood,
composite or light gauge hollow metal doors. See chart below for quantities.
Application
Device
Sex Bolt 425
(Supplied)
Hollow core wood, composite or light gauge hollow metal doors - EO (exit only device) 6
Hollow core wood, composite or light gauge hollow metal doors - Device x Trim 2
186
Prices subject to change without notice
25 Series Architectural /
Heavy Duty Pushpads EXITS
Price Book 7
Effective May 4, 2019 • Rev. 05/19
25-C Device Series
3' Devices are priced with standard trim and strikes, 4' add $19 list and 2' add $123 list.
Cylinders are not included in the price.
EXIT HARDWARE
Concealed Vertical Rod Devices
(Includes 4188 Strikes )
Trim/Control US28 US32D 313AN
US19*
US26D US26 US32 US10 US4
US3
643E*
US15*
* 25-C-EO ―1295 1646 1375 1583 1646 1677 1646 1677 1773
Lever - Dane (handed and eld reversible)
* 25-C-L 510L* 1620 2029 1700 1966 2035 2066 1971 2002 2162
* 25-C-L-BE 510L-BE* 1620 2029 1700 1966 2035 2066 1971 2002 2162
* 25-C-L-NL 510L-NL* 1555 1952 1635 1889 2003 2034 1906 1937 2130
* 25-C-L-DT 510L-DT* 1555 1952 1635 1889 2003 2034 1906 1937 2130
VR Lever (handed and eld reversible)
* 25-C-L 511L* 1678 2083 1758 2020 2092 2123 2029 2060 2219
Thumbpiece (non-handed)
25-C-TP 512TP 1585 1966 1665 1903 2022 2053 1936 1967 2149
25-C-TP-BE 512TP-BE 1585 1966 1665 1903 2022 2053 1936 1967 2149
* 25-C-NL 512-NL* 1530 1902 1610 1839 1949 1980 1881 1912 2076
Knob (non-handed)
25-C-K 513K 1541 1932 1621 1869 1982 2013 1892 1923 2109
25-C-K-BE 513K-BE 1541 1932 1621 1869 1982 2013 1892 1923 2109
25-C-K-NL 513K-NL 1541 1932 1621 1869 1982 2013 1892 1923 2109
25-C-K-DT 513K-DT 1541 1932 1621 1869 1982 2013 1892 1923 2109
DT Pull (717 handed and eld reversible, 512 non-handed)
25-C-DT 717DT 1474 1902 1594 1839 1902 1933 1825 1856 2029
25-C-DT 512DT 1493 1846 1573 1783 1949 1980 1844 1875 2076
Delta Trim (handed and eld reversible)
* 25-C-C 718C* 1434 1843 1554 1780 1843 1874 1785 1816 1970
* These devices and 510L, 510L-BE, 510L-NL, 510L-DT, 511L, 512NL trims are available in 643E, US15, and US19 nishes.
REFERENCE NOTES:
25 Series ordered in 313AN will be supplied with trims in SP313.
Handing: The 25-C Device is handed and eld reversible. Trims are furnished RHR when handing is not specied.
Extension Rods: For door heights over 7'0" up to 8'0", 12" extension rods are furnished at no additional charge at the time of device order.
For door heights over 8'0" up to 10'0" extension rods are furnished at prices shown in parts section with the device at the time of order.
MUST specify door height on order line.
Sex Bolts:
Optional Sex Bolts are recommended for center case mounting when device is used with light gauge hollow metal doors.
See chart below for quantities and list prices.
Application
Sex Bolt 425
(Optional) List Add
Light gauge hollow metal doors - EO (exit only device) 672
Light gauge hollow metal doors - Device x Trim 224
187
Prices subject to change without notice
25 Series
Architectural /
Heavy Duty
PushpadsEXITS
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Device Series F-25-C
3' Devices are priced with standard trim and strikes, 4' add $19 list and 2' add $123 list.
Cylinders are not included in the price.
FIRE EXIT HARDWARE
Concealed Vertical Rod Devices
(Includes 4188 and 2130 Strikes )
Trim/Control US28 US32D 313AN
US19*
US26D US26 US32 US10 US4
US3
643E*
US15*
* F-25-C-EO 1483 1834 1563 1771 1834 1865 1834 1865 1961
Lever - Dane (handed and eld reversible)
* F-25-C-L 510L* 1808 2217 1888 2154 2223 2254 2159 2190 2350
* F-25-C-L-BE 510L-BE* 1808 2217 1888 2154 2223 2254 2159 2190 2350
* F-25-C-L-NL 510L-NL* 1743 2140 1823 2077 2191 2222 2094 2125 2318
* F-25-C-L-DT 510L-DT* 1743 2140 1823 2077 2191 2222 2094 2125 2318
VR Lever (handed and eld reversible)
* F-25-C-L 511L* 1866 2271 1946 2208 2280 2311 2217 2248 2407
Thumbpiece (non-handed)
F-25-C-TP 512TP 1773 2154 1853 2091 2210 2241 2124 2155 2337
F-25-C-TP-BE 512TP-BE 1773 2154 1853 2091 2210 2241 2124 2155 2337
* F-25-C-NL 512-NL* 1718 2090 1798 2027 2137 2168 2069 2100 2264
Knob (non-handed)
F-25-C-K 513K 1729 2120 1809 2057 2170 2201 2080 2111 2297
F-25-C-K-BE 513K-BE 1729 2120 1809 2057 2170 2201 2080 2111 2297
F-25-C-K-NL 513K-NL 1729 2120 1809 2057 2170 2201 2080 2111 2297
F-25-C-K-DT 513K-DT 1729 2120 1809 2057 2170 2201 2080 2111 2297
DT Pull (717 handed and eld reversible, 512 non-handed)
F-25-C-DT 717DT 1662 2090 1782 2027 2090 2121 2013 2044 2217
F-25-C-DT 512DT 1681 2034 1761 1971 2137 2168 2032 2063 2264
Delta Trim (handed and eld reversible)
* F-25-C-C 718C* 1622 2031 1742 1968 2031 2062 1973 2004 2158
* These devices and 510L, 510L-BE, 510L-NL, 510L-DT, 511L, 512NL trims are available in 643E, US15, and US19 nishes.
REFERENCE NOTES:
25 Series ordered in 313AN will be supplied with trims in SP313.
Handing: The F-25-C Device is handed and eld reversible. Trims are furnished RHR when handing is not specied.
Extension Rods: For door heights over 7'0" up to 8'0", 12" extension rods are furnished at no additional charge at the time of device order.
For door heights over 8'0" up to 10'0" extension rods are furnished at prices shown in parts section with the device at the time of order.
MUST specify door height on order line.
Sex Bolts:
Sex Bolts are supplied for center case mounting when device is used with non-reinforced hollow metal doors.
See chart below for quantities.
Application
Sex Bolt 425
(Supplied)
Non-reinforced hollow metal doors - EO (exit only device) 6
Non-reinforced hollow metal doors - Device x Trim 2
188
Prices subject to change without notice
25 Series Architectural /
Heavy Duty Pushpads EXITS
Price Book 7
Effective May 4, 2019 • Rev. 05/19
25-CWDC Device Series
3' Devices are priced with standard trim and strikes, 4' add $19 list and 2' add $123 list.
Cylinders are not included in the price.
EXIT HARDWARE
Wood Door Concealed Vertical Rod
(Includes 4188 and 2130 Strikes )
Trim/Control US28 US32D 313AN
US19*
US26D US26 US32 US10 US4
US3
643E*
US15*
* 25-CWDC-EO ―1466 1827 1557 1791 1863 1897 1863 1897 2008
Lever - Dane (handed and eld reversible)
* 25-CWDC-L 510L* 1791 2210 1882 2174 2252 2286 2188 2222 2397
* 25-CWDC-L-BE 510L-BE* 1791 2210 1882 2174 2252 2286 2188 2222 2397
* 25-CWDC-L-NL 510L-NL* 1726 2133 1817 2097 2220 2254 2123 2157 2365
* 25-CWDC-L-DT 510L-DT* 1726 2133 1817 2097 2220 2254 2123 2157 2365
VR Lever (handed and eld reversible)
* 25-CWDC-L 511L* 1849 2264 1940 2228 2309 2343 2246 2280 2454
Thumbpiece (non-handed)
25-CWDC-TP 512TP 1756 2147 1847 2111 2239 2273 2153 2187 2384
25-CWDC-TP-BE 512TP-BE 1756 2147 1847 2111 2239 2273 2153 2187 2384
* 25-CWDC-NL 512-NL* 1701 2083 1792 2047 2166 2200 2098 2132 2311
Knob (non-handed)
25-CWDC-K 513K 1712 2113 1803 2077 2199 2233 2109 2143 2344
25-CWDC-K-BE 513K-BE 1712 2113 1803 2077 2199 2233 2109 2143 2344
25-CWDC-K-NL 513K-NL 1712 2113 1803 2077 2199 2233 2109 2143 2344
25-CWDC-K-DT 513K-DT 1712 2113 1803 2077 2199 2233 2109 2143 2344
DT Pull (717 handed and eld reversible, 512 non-handed)
25-CWDC-DT 717DT 1645 2083 1776 2047 2119 2153 2042 2076 2264
25-CWDC-DT 512DT 1664 2027 1755 1991 2166 2200 2061 2095 2311
Delta Trim (handed and eld reversible)
* 25-CWDC-C 718C* 1605 2024 1736 1988 2060 2094 2002 2036 2205
* These devices and 510L, 510L-BE, 510L-NL, 510L-DT, 511L, 512NL trims are available in 643E, US15, and US19 nishes.
REFERENCE NOTES:
25 Series ordered in 313AN will be supplied with trims in SP313.
Handing: The 25-CWDC Device is handed and eld reversible. Trims are furnished RHR when handing is not specied.
Extension Rods: For door heights over 7'0" up to 8'0", 12" extension rods are furnished at no additional charge at the time of device order.
For door heights over 8'0" up to 10'0" extension rods are furnished at prices shown in parts section with the device at the time of order.
MUST specify door height on order line.
Sex Bolts:
Optional Sex Bolts are recommended for center case mounting when device is used with hollow core wood or composite doors.
See chart below for quantities and list prices.
Application
Device
Sex Bolt 425
(Optional) List Add
Hollow core wood or composite doors - EO (exit only device) 672
Hollow core wood or composite doors - Device x Trim 224
189
Prices subject to change without notice
25 Series
Architectural /
Heavy Duty
PushpadsEXITS
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Device Series F-25-CWDC
3' Devices are priced with standard trim and strikes, 4' add $19 list and 2' add $123 list.
Cylinders are not included in the price.
FIRE EXIT HARDWARE
Wood Door Concealed Vertical Rod
(Includes 4188 and 2130 Strikes )
Trim/Control US28 US32D 313AN
US19*
US26D US26 US32 US10 US4
US3
643E*
US15*
* F-25-CWDC-EO ―1654 2015 1745 1979 2051 2085 2051 2085 2196
Lever - Dane
* F-25-CWDC-L 510L* 1979 2398 2070 2362 2440 2474 2376 2410 2585
* F-25-CWDC-L-BE 510L-BE* 1979 2398 2070 2362 2440 2474 2376 2410 2585
* F-25-CWDC-L-NL 510L-NL* 1914 2321 2005 2285 2408 2442 2311 2345 2553
* F-25-CWDC-L-DT 510L-DT* 1914 2321 2005 2285 2408 2442 2311 2345 2553
VR Lever
* F-25-CWDC-L 511L* 2037 2452 2128 2416 2497 2531 2434 2468 2642
Thumbpiece
F-25-CWDC-TP 512TP 1944 2335 2035 2299 2427 2461 2341 2375 2572
F-25-CWDC-TP-BE 512TP-BE 1944 2335 2035 2299 2427 2461 2341 2375 2572
* F-25-CWDC-NL 512-NL* 1889 2271 1980 2235 2354 2388 2286 2320 2499
Knob
F-25-CWDC-K 513K 1900 2301 1991 2265 2387 2421 2297 2331 2532
F-25-CWDC-K-BE 513K-BE 1900 2301 1991 2265 2387 2421 2297 2331 2532
F-25-CWDC-K-NL 513K-NL 1900 2301 1991 2265 2387 2421 2297 2331 2532
F-25-CWDC-K-DT 513K-DT 1900 2301 1991 2265 2387 2421 2297 2331 2532
DT Pull
F-25-CWDC-DT 717DT 1833 2271 1964 2235 2307 2341 2230 2264 2452
F-25-CWDC-DT 512DT 1852 2215 1943 2179 2354 2388 2249 2283 2499
Delta Trim (handed and eld reversible)
* F-25-CWDC-C 718C* 1793 2212 1924 2176 2248 2282 2190 2224 2393
* These devices and 510L, 510L-BE, 510L-NL, 510L-DT, 511L, 512NL trims are available in 643E, US15, and US19 nishes.
REFERENCE NOTES:
25 Series ordered in 313AN will be supplied with trims in SP313.
Extension Rods: For door heights over 7'0" up to 8'0", 12" extension rods are furnished at no additional charge at the time of device order.
For door heights over 8'0" up to 10'0" extension rods are furnished at prices shown in parts section with the device at the time of order.
MUST specify door height on order line.
Handing: The F-25-CWDC Device is handed and eld reversible. Trims are furnished RHR when handing is not specied.
Sex Bolts:
Sex Bolts are supplied for center case mounting when device is used with hollow core or composite
doors. See chart below for quantities.
Application
Device
Sex Bolt 425
(Supplied)
Hollow core or composite doors - EO (Exit only device) 6
Hollow core or composite doors - Device x Trim 2
190
Prices subject to change without notice
25 Series Architectural /
Heavy Duty Pushpads EXITS
Price Book 7
Effective May 4, 2019 • Rev. 05/19
25 Device Options
Cylinder Dogging
Not for use with Fire Exit Hardware
Prex List Add
CD Cylinder Dogging available on all 25 series Panic Devices. 62
LD Less Dogging available on all 25 series Panic Devices. N/C
Less Bottom Rod
Sufx List Add
LBR Less Bottom Rod available with UL Fire Label at no additional charge on F-25-V and F-25-C devices.
Fire rated LBR devices must be ordered in pairs of Vertical Rod Devices.
For Fire Rated Devices specify one device LBR and second device LBR-AFL. Second device provided with a Fire Pin.
N/C
Accessible Device
Sufx List Add
AX Accessible device compliant with the California Building Code (Section 11B-309.4) requirement for 5 lb. maximum opera-
tional force. Available on 3' and 4' AX-25-R, AX-F-25-R, AX-25-V, AX-F-25-V, AX-25-V-LBR, AX-F-25-V-LBR/LBR-AFL, AX-
25-C, AX-F-25-C, AX-25-C-LBR, AX-F-25-C-LBR/LBR-AFL. Trim functions available EO, DT, NL, L, L-BE, L-NL, L-DT, NL-OP,
and C. Other device and trim options compatible with AX25 devices: EL, RX, DM, LM, CON, EA, FSA/FSE, CD, LD.
24
Hurricane Device
Meets all FBC Hurricane Listings. Consult factory for specic Applications.
Prex List Add
HH Hurricane option available on 25-R*, F-25-R, 25-V, F-25-V. Prex device "HH".
Note: HH-25-V-EO and HH-F-25-V-EO, will be supplied with twelve sexbolts. Add $126.00 LIST.
Other device functions will be supplied with eight sexbolts. Add $78.00 LIST.
*HH-25-R requires 299F Strike; Strike 299F will be provided/charged in place of Strike 299.
Standard Devices 25-C, F-25-C, 25-M, F-25-M meet all FBC Hurricane
listing requirements. Consult factory for specic applications.
Prex "HH" is not required on these devices.
28
N/C
Electric Latch Retraction
Prex List Add
EL Electric Latch Retraction - Available on all 25 series Panic and Fire Devices
Electric Latch cannot be used in combination with CD, EA or KOR options.
766
MEL Motorized Electric Latch Retraction - Available on all 25 series Panic and Fire Devices except for 25-M and F-25-M.
Motorized Electric Latch Retraction cannot be used in combination with AX, HD, CD, EA, or KOR options
725
REFERENCE NOTE:
PS914 is required for EL operation. See Power Supply section for more detail.
Device Monitoring
Prex List Add
RX Touch Bar Request to Exit Switch available on all 25 series devices.
RX dogging monitoring switch can be used in combination with a second DM or LM switch.
201
DM Latch Bolt Monitor Switch (provide signal when latch bolt is fully extended)
DM device monitoring switch can be used in combination with a RX switch.
210
LM Latch Bolt Monitoring Switch (provide signal when latch bolt is fully retracted)
LM device monitoring switch can be used in combination with a RX switch.
201
KOR Key Override - Override device monitoring on a door by use of a keyed cylinder.
KOR must be used in combination with a device monitoring switch.
56
Allegion Connect
Sufx List Add
CON Cross-category solution using common interconnect components for electried options.
Available with EL, RX, DM, LM, EA, RX-DM, RX-LM, EL-RX, EL-DM, EL-LM options.
Also available as an option on FSA and FSE options for the Falcon 25 series trim.
N/C
NOTE: For wire harness options refer to Power Supply and Electronic Component Section.
191
Prices subject to change without notice
25 Series
Architectural /
Heavy Duty
PushpadsEXITS
Price Book 7
Effective May 4, 2019 • Rev. 05/19
(continued) Device Options 25
Exit Alarm
Prex List Add
EA Exit Alarm available on 25-R and 25-V Panic and Fire Devices.
Price includes switch - "RX" is standard, "LM" is optional at no charge. To order
"Less Switch", Deduct $201 list. For vertical rod tampering monitoring on Surface Vertical Devices, specify device with
DM (Latch Bolt Monitor Switch). Add $210 list. 9 volt battery included.
498
Electric Lock or Unlock of Trims
Prex List Add
FSA Electric Lock/Unlock Trim, Fail Safe (unlocks when power is interrupted). 294
FSE Electric Lock/Unlock Trim, Fail Secure (locks when power is interrupted). 294
REFERENCE NOTES:
FSA/FSE available on all 25 series devices.
Available with TP, K, or L functions only.
Can be used in combination with EL, EA, or any device monitoring switch.
Power supply PS902 is the recommended power supply for use with FSA/FSE trim. If paired with an EL device, PS914 is required.
See the power supply section for more information.
Schlage Electronic Exit Trim
AD series Electronic Exit Trim is available on Series 25 for rim. AD-300/400 network trim is available exclusively
with Series 25 devices when mounted with LC-RX switch must be specied with exit device.
Four communication options:
AD-200 993 Ofine, access rights stored on lock.
AD-250 993 Ofine, access rights on stored magnetic stripe credential.
AD-300 993 Networked Hardware Locks.
AD-400 993 Networked Wireless Locks
For complete pricing information refer to Schlage Electronic Security Price Book
192
Prices subject to change without notice
25 Series Architectural /
Heavy Duty Pushpads EXITS
Price Book 7
Effective May 4, 2019 • Rev. 05/19
25 Series Trims
Lever Trim
Model No.
Lever
Style Device Type Description
SP28 SP313
US4 US10
US32D
US19*
US26D
US3 643E*
US15* US26
US32
510L Dane R,V,M,C Lever, Key Locks or Unlocks 325 383 389
510L-NL Dane R,V,M,C Lever, Night Latch 260 306 357
510L-DT Dane R,V,M,C Lever, Dummy Trim 260 306 357
510L-BE Dane R,V,M,C Lever, Blank Escutcheon 325 383 389
* 643E, US15, US19 are available on the lever trim type listed above except Sutro.
510 series trim are handed and eld reversible. Trims are furnished RHR when handing is not specied.
The Dane Lever is furnished standard. Optional lever designs Broadway, Boardwalk, Danish, Latitude, Longitude, Sutro, Quantum and Avalon are available at no
additional charge.
Electric Lock or Unlock option is available on 510L function only.
Sufx FSA for Fail Safe operation, or FSE for Fail Secure operation, add $294 List.
Knurling on Dane lever, add $63 List. Contact factory for lead times.
Vandal Resistant Trim
Model No.
Lever
Style Device Type Description
SP28 SP313
US4 US10
US32D
US19*
US26D
US3 643E*
US15* US26
US32
511L* Dane R,V,M,C Lever, Key Locks or Unlocks 383 437 446
* 643E, US15, US19 are available on the lever trim type listed above except Sutro.
511 series trim are handed and eld reversible. Trims are furnished RHR when handing is not specied.
The Dane Lever is furnished standard. Optional lever designs Broadway, Boardwalk, Danish, Latitude, Longitude, Sutro, Quantum and Avalon are available at no
additional charge.
Electric Lock or Unlock option is available on 511L.
Sufx FSA for Fail Safe operation, or FSE for Fail Secure operation, add $294 List.
Night Latch and Thumbpiece Trim
Model No. Device Type Description
SP28 SP313
US4 US10
US32D
US19*
US26D
US3 643E*
US15* US26
US32
512NL* R,V,M,C Night Latch 235 256 303
512TP R,V,M,C Thumbpiece, Key Locks or Unlocks 290 320 376
512TP-BE R,V,M,C Thumbpiece, Blank Escutcheon 290 320 376
* Available in 643E, US15, US19 on all Falcon Exit levers except for Sutro.
Electric Lock or Unlock option is available on 512TP function only.
Sufx FSA for Fail Safe operation, or FSE for Fail Secure operation, add $294 List.
Knob Trim
Model No. Device Type Description
SP28 SP313
US4 US10
US32D
US26D US3 US26 US32
513K R,V,M,C Knob, Key Locks or Unlocks 246 286 336
513K-NL R,V,M,C Knob, Night Latch 246 286 336
513K-DT R,V,M,C Knob, Dummy Trim 246 286 336
513K-BE R,V,M,C Knob, Blank Escutcheon 246 286 336
Electric Lock or Unlock option is available on 513K function only.
Sufx FSA for Fail Safe operation, or FSE for Fail Secure operation, add $294 List.
Pull Trim
Model No. Device Type Description
SP28 SP313
US4 US10
US32D
US26D US3 US26 US32
512DT R,V,M,C Dummy Trim 198 200 303
Delta Trim
Model No. Device Type Description
SP28 US4
US10 SP313
US19* US26D
US3, 643E*
US15 US26
717DT R,V,M,C Dummy Trim 179 219 256
718C* C Night Latch Less Pull 139 179 197
* Available in 643E and US19.
717 and 718 series trim are handed and eld reversible. Trims are furnished RHR when handing is not specied.
Cylinders are not included in price.
193
Prices subject to change without notice
25 Series
Architectural /
Heavy Duty
PushpadsEXITS
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Device Strikes 25
Rim Strikes
Model Description Unnished US19 US26D US32D US4 US10 US10B SP313 US3 US26 US32
264 24/25-R Panic Devices - Opt. - 101 117 --------
299 24/25-R Panic Devices - Std. - 61 73 -73 - - 73 95 95 -
299F 24/25-R Fire Devices - Std. - 77 - 102 119 119 119 - 137 -137
499F 25-R Fire Devices - Opt. - 182 - 190 - - - - - - -
1439 24/25-R Panic Devices - Opt. - 147 _ - - - - - _ - -
1606 24/25-R Panic Devices - Opt. 73 ----------
1609 25-R Panic Devices - Opt. - 101 113 -113 113 113 -122 122 -
Must be used with a Coordinator. Not a UL re exit hardware listed application.
Vertical Rod Bottom Strikes
Model Description Unnished
2130 19-V/24/25/XX-V,C Panic or Fire - Std. 52
4155 19-V/24/25/XX-V,C Panic 52
Mortise Lock Strikes
Model Description Unnished
1279 25/XX-M Panic and Fire Devices - Std. 52
F1280 25-M Fire Devices - Opt. 52
REFERENCE NOTES:
Refer to device catalogs for specic door application strike requirements.
Vertical Rod Top Strikes
Model Description Unnished
3788* 19/24/25/XX-V Panic and Fire Devices 52
4188 24/25/XX-C,CWDC Panic and Fire Devices 52
* For Flush Transom applications, Specify part number 4215-019 Angle Bracket, add $53 List.
194
Prices subject to change without notice
25 Series Architectural /
Heavy Duty Pushpads EXITS
Price Book 7
Effective May 4, 2019 • Rev. 05/19
25 Device Accessories
Cover Plates & Filler Plates
Model No. Description Unnished
3722 Strike cover - ASA 4-7/8" 11
3723 Mortise front - 8" x 1-1/4" 11
3721 Lock front - 2-1/4" x 1-1/8" 11
Cylinders
Model No. Description US26D
US3 , US4, US10B
US10, US32, US32D
985 1-1/8" Mortise Cylinder with Straight Cam (#24) 61 63
986 1-1/4" Mortise Cylinder with Straight Cam (#24) 61 63
951 Rim Cylinder 61 63
C987 1-3/8" Interchangeable Core Mortise Cylinder Housing 38 40
C953 Interchangeable Core Rim Cylinder Housing 40 42
REFERENCE NOTES:
Interchangeable Core Cylinder Housing uses #5 cam.
Custom Keying not available. Falcon G - default keyway.
Cylinder type determined by trim function.
IC Cylinder Housings sold LESS SFIC
US11 nish = 643e
Cylinder Dogging Kits
Model No. Description Part No.
US3 , US4, US10, US26, US26D,
US28, US32D, 313AN
25CDK-3 25 Series - 3' device 650159 62
25CDK-4 25 Series - 4' device 650160 62
REFERENCE NOTES:
Cylinder Sold Separately.
When a device is ordered "with CD with Cylinder" a 1-1/4" mortise cylinder (986 Falcon G x straight cam KD) is supplied for CD.
CD Kits can also pair with a 1-1/8" mortise cylinder (985 Falcon G x straight cam KD). Must be ordered separately.
195
Prices subject to change without notice
25 Series
Architectural /
Heavy Duty
PushpadsEXITS
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Device Accessories 25
Dummy Touch Bars
3´ Device pricing below, 4´ add $19 list.
Model No. Description
SP28
SP313
US4
US10 US32D
US3, US32,
US15, US19,
643e, US26
US26D
250DT 24/25 Series Dummy Touch Bar 331 367 417 476
Model No. Description Part #
US3, US4, US10, US26, US26D,
US32D, SP28, SP313
ELK-3 24/25 Electric Latch Retraction Kit 3' 650147 766
ELK-4 24/25 Electric Latch Retraction Kit 4' 650148 766
Model No. Description Part #
Part Number
w/ Allegion Connect (-CON)
US3, US4, US10, US26, US26D,
US28, US32D, 313AN
25-MELK-3 25 Motorized Electric Latch Retraction Kit 3' 47266630 47270546 725
25-MELK-4 25 Motorized Electric Latch Retraction Kit 4' 47266631 47270547 725
Model No. Description Part # Unnished
24/25 RX KIT 24/25 Series RX Switch Kit 650359 248
Extension Rods
Part No. Description All Finishes
650006 24/25/19/XX-V Extension Rod 12" (ER12-V) 21
650007 24/25/19/XX-V Extension Rod 24" (ER24-V) 37
650008 24/25/19/XX-V Extension Rod 36" (ER36-V) 60
650017 24/25/XX-C, CWDC Extension Rod 12" (ER12-C) 21
650018 24/25/XX-C, CWDC Extension Rod 24" (ER24-C) 37
650019 24/25/XX-C, CWDC Extension Rod 36” (ER36-C) 60
REFERENCE NOTES:
1) Surface Vertical and Concealed Vertical Rod Devices for door heights over 7'0" up to 8'0", 12" extension rods are furnished at no additional charge at the
time of device order. Must specify door height on order line.
2) For door heights over 8'0" up to 10'0" extension rods are furnished at prices shown above with the device at the time of order. MUST specify door height
on order line.
3) Replacement extension rods can be ordered individually by the part numbers listed above.
Electric and Alarm Kits
Model No. Description Part #
US3, US4, US10, US26 US26D,
US28, US32D, 313AN
25-EAK-3 25 Series Exit Alarm Kit 3' 650167 498
25-EAK-4 25 Series Exit Alarm Kit 4' 650168 498
Optional Features:
Prex List Add
RX Touchbar Request to Exit Switch - For D250 only 201
KOR Key Override device monitoring on a door by use of a keyed cylinder - For D250 only 56
250DT Parts
Part No. Description
SP28,SP313,
US32D
US4,
US10
US26,
US32 US26D US3
600291 250 Front Cover Plate Pkg 23 33 91 29 47
196
Prices subject to change without notice
25 Series Architectural /
Heavy Duty Pushpads EXITS
Price Book 7
Effective May 4, 2019 • Rev. 05/19
8500 Mortise Lock
Model No. Description
US4
US10 US19 US10B
US3, US26
US26D
8500NL Night Latch (Universal for all 25 Device Mortise Lock Trim Options) 321 401 401 401
REFERENCE NOTES:
US32D and US32 nish device supplied with US26D and US26 mortise lock.
Mortise Device is handed. For replacement of Mortise Lock only, handing is eld reversible. Lock is furnished RHR when handing is not specied.
See Trim section for FSA/FSE options compatible with 8500NL, ordered as Trim option.
8500 Mortise Locks - Parts
Part No. Description Unnished
3518 Dead Lock Arm Spring 7
3519 Knob Cam 36
3530 Auxiliary Bolt Actuator 36
661473 Auxiliary Bolt Spring 7
661472 Deadlocking Arm 36
3542 Cylinder Operating Arm 36
4067 Locking Arm 37
610042 Locking Arm and Spring Assembly 38
25 SLM Blocking
For use with devices on doors with special high density blocking material.
Blocking material must be UL or Warnock Hersey approved.
Model No. Part #
F-25-R/C F-25 Rim/Concealed Vertical SLM Blocking Kit 600335 18
F-25-V F-25 Surface Vertical SLM Blocking Kit 600336 20
25 Device Series - Parts
Shim Kits
Model No. Description Part # US19
SK25-R/M 25 Rim or 25 Mortise Shim Kit - 1/4" 650107 66
SK25-V-8 25 Surface Vertical Shim Kit - 1/4" - over 7' up to 8' doors 650108 66
SK25-V-10 25 Surface Vertical Shim Kit - 1/4" - over 8' up to 10' doors 650266 66
579 Retrot Shim Kit - HH-25-R, HH-F25-R (Required) 650106 28
REFERENCE NOTES:
All shim kits for use on door thicknesses up to 2". Consult factory for door thickness over 2"
197
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Prices subject to change without notice
25 Series
Architectural /
Heavy Duty
PushpadsEXITS
Device Series - Parts 25
(F) 25 Exit Devices
Part No. Description Unnished US28 US32D 313AN US26D
US10, US26
US32 US4 US3
650239 25-R Center Case Kit 175 ---- - --
650240 F-25-R Center Case Kit 188 - - - - - - -
650242 (F) 25-V Center Case Kit 148 ---- - --
650244 (F) 25-C, CWDC Center Case Kit 135 ---- - --
650246 (F) 25-M Center Case Kit RHR 148 ---- - --
650398 (F) 25-M Center Case Kit LHR 148 ---- - --
650255 (F) 25-R Center Case Cover Kit - 123 155 132 152 158 162 168
650257 (F) 25-V Center Case Cover Kit - 123 155 132 152 158 162 168
650259 (F) 25-C, M Center Case Cover Kit - 123 155 132 152 158 162 168
600307 25 Series Center Case Cover Mtg Pkg - - - 11 - 11 11 11
650261 25-V/M/C Center Case Housing Kit 19 - - - - - - -
600308 25-V/M/C Center Case Housing Screw Pkg 10 - - - - - - -
650262 25-V Center Case Finger Kit 36 - - - - - - -
650263 25-C Center Case Finger Kit 27 ---- - --
600309 25-V/C Center Case Finger Screw Pkg 10 - - - - - - -
650378 25-M Center Case Slide Bar Assy RHR 75 - - - - - - -
650377 25-M Center Case Slide Bar Assy LHR 75 - - - - - - -
661412 25 Series Channel 3' Door - 79 98 84 96 100 101 107
661413 25 Series Channel 4' Door - 101 129 105 122 130 132 136
650227 F-25 Series Channel Cover 3' - 38 38 38 38 38 38 38
650228 F-25 series Channel Cover 4' - 41 41 41 41 41 41 41
650119 25 Series CD Channel Cover 3' - 48 48 48 48 48 48 48
650120 25 Series CD Channel Cover 4' - 55 55 55 55 55 55 55
650135 25 Series EA Channel Cover 3' - 73 73 73 73 73 73 73
650136 25 Series EA Channel Cover 4' - 83 83 83 83 83 83 83
650143 25 Series KOR Channel Cover 3' - 61 61 61 61 61 61 61
650144 25 Series KOR Channel Cover 4' - 65 65 65 65 65 65 65
650191 25 Series Hex Dogging Kit 3' - 64 64 64 64 64 64 64
650192 25 Series Hex Dogging Kit 4' - 68 68 68 68 68 68 68
610480 25 Dogging Housing 18 - - - - - - -
060109 25 Hex Dogging Key 7/32" (Pkg of 10) 13 ---- - --
650294 25 Channel End Cap Kit 1-3/4" Door - 31 38 35 37 39 39 41
650348 25 Channel End Cap Kit 2-1/4" Door - 31 38 35 37 39 39 41
600305 25 Series Channel Screw (Pkg of 10) 15
600310 25 Series Push Bar End Cap Kit - 35 40 36 39 40 41 45
600319 25 Series Push Bar Guide Pkg 11 - - - - - - -
650345 (F) 25-R/M Mounting Pkg 1-3/4" Door 21 - - - - - - -
650293 (F) 25-R/M Mounting Pkg 2-1/4" Door 21 - - - - - - -
650315 25-V Mounting Pkg 1-3/4" - 2-1/4" Door 41 - - - - - - -
650316 F-25-V Mounting Pkg 1-3/4" Door 41 - - - - - - -
650295 F-25-V Mounting Pkg 2-1/4" Door 41 - - - - - - -
650318 25-C Mounting Pkg 1-3/4" Door 30 - - - - - - -
650300 25-C Mounting Pkg 2-1/4" Door 30 - - - - - - -
650317 F-25-C Mounting Pkg 1-3/4" Door 30 - - - - - - -
650346 F-25-C Mounting Pkg 2-1/4" Door 30 - - - - - - -
650299 (F) 25-CWDC Mounting Pkg 1-3/4" Door - - - 61 - 61 61 61
650296 (F) 25-CWDC Mounting Pkg 2-1/4" Door - - - 61 - 61 61 61
060111 Cotter Key 1/8" x 1" (Pkg of 10) 13 ---- - --
600320 EL Solenoid Pkg 181 - - - - - - -
600321 EL Plunger Solenoid Pkg 68 - - - - - - -
650359 24/25 Series RX Switch Kit 248 ---- - --
050534 EL Potted Circuit Breaker 305 - - - - - - -
650265 Exit Alarm Label - Service 10 - - - - - - -
198
Prices subject to change without notice
25 Series Architectural /
Heavy Duty Pushpads EXITS
Price Book 7
Effective May 4, 2019 • Rev. 05/19
25 Device Series - Parts
(F) 25 Exit Devices - Latches and Rods
Part No. Description Unnished SP28
SP313
US32D US26D
US32
US26
US32
US3
US4
US10
650389 25-V Top Latch Case 117 -----
650375 F-25-V Top Latch Case 121 - - - -
650202 25-V Latch Case Cover Kit - 68 68 88 88 88
650336 25-V Latch Case Cover Mounting Pkg - 4 4 4 4 4
650311 25-V Rod Guide Kit - 52 55 - 66 49
650387 25-V Bottom Bolt Guide (Latch cover sold separately) 10 - - -
3777 25-V Top Rod Kit - 88 88 88 88 88
610055 25-V Bottom Rod Kit - 119 119 119 119 119
5494 F-25-V Auxiliary Fire Pin Kit (LBR application only) 151 - - - - -
603 25-C, C-WDC Top Latch Case 202 - - - - -
F603 F-25-C Top Latch Case 280 - - - - -
WF603 F-25-CWDC Top Latch Case 280 - - - - -
650339 (F) 25-C, CWDC Top Latch Release Kit - - 39 39 35 35
4567 25-C Bottom Bolt Guide 48 - - - - -
4835 25-CWDC Bottom Bolt Guide 44 - - - - -
4694 F-25-CWDC Latch Bracket 10 - - - - -
650376 (F) 25-C, CWDC Center Slide Assy 281 - - - - -
4832 (F) 25-CWDC Center Slide Reinforcement Plate 36 - - - - -
4833 24-CWDC Reinforcement Plate - 32 32 43 43 43
4834 24-CWDC Reinforcement Plate w/ Access Hole - 32 32 43 43 43
610061 (F) 25-C, CWDC Top Rod Kit 88 - - - - -
610057 (F) 25-C, CWDC Bottom Rod Kit 119 - - - - -
5494 F-25-C Auxiliary Fire Pin Kit (LBR application only) 151 - - - - -
660002 #10 x 1 1/4" FPHSMS Clear Zinc 2 - - - - -
199
Prices subject to change without notice
25 Series
Architectural /
Heavy Duty
PushpadsEXITS
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Device Series - Parts 25
25 Series Trim
Part No. Description Unnished SP28 SP313
US26D
US32D
US10
US26
US4
US32 US3
600272 510 Backplate Assembly 28 - - - - - -
600273 510/512/513 Slider 74 ------
600282 511L Slider Assy 174 ------
090041 Hook Spring Pkg 11 - - - - - -
600274 510/511L Spring (Pkg of 2) 21 - - - - - -
600284 512TP/513K Spring (Pkg of 2) 11 - - - - - -
600275 510L/512TP/513K Locking Hook 28 - - - - - -
600281 510L-NL/512NL/513K-NL Cam 30 - - - - - -
600276 L/K Spindle Cam Kit 30 - - - - - -
600280 L-NL/L-DT Spindle Cam Kit 32 - - - - - -
600277 510/511/513 Spindle Cam Retaining Ring (Pkg of 10) 10 - - - - - -
650267 510L/513K Shear Pin (Pkg of 10) 24 ------
600283 511L Shear Pin (Pkg of 5) 10 - - - - - -
600278 500 Series Cylinder Lock Nut 11 - - - - - -
600279 500 Series Cylinder Nut Tool 20 - - - - - -
600296 500 Series Security Collar - 24 24 30 30 30 31
600289 Lower Pull Bracket Kit 1.3/4" - 15 12 15 15 15 20
600290 Lower Pull Bracket Kit 2.1/4" - 15 12 15 15 15 20
600285 512TP Thumbpiece - 35 36 41 44 44 48
600286 512TP Thumbpiece Pivot Pin 9 - - - - - -
600287 512TP Thumbpiece Bracket 12 ------
600297 512TP Pull - 137 147 173 175 180 188
600298 513K Knob Assy - 136 145 169 174 178 187
600299 510L Dane Lever Kit - 101 106 129 131 133 138
600300 510L Sutro Lever Kit - 101 106 129 131 133 138
600301 510L Quantum Lever Kit - 101 106 129 131 133 138
600337 510 Avalon Lever Kit - 162 164 164 224 164 224
600288 Pull Grip Screw (Pkg of 10) 4 - - - - - -
650231 512 Mounting Pkg 1-3/4" - - 5 5 - 9 -
650232 512 Mounting Pkg 2-1/4" - - 5 5 - 9 -
650235 510/511/512/513 Screw Pkg 1-3/4" 4 - - - - - -
650237 510/511/512/513 Screw Pkg 2-1/4" 4 - - - - - -
600293 FSA/FSE Solenoid Kit 145 ------
600294 FSA/FSE Solenoid Plunger 21 - - - - - -
600295 FSA/FSE Pivot Pin 4 - - - - - -
650278 FSA/FSE Solenoid Spring 6 - - - - - -
200
Prices subject to change without notice
25 Series Architectural /
Heavy Duty Pushpads EXITS
Price Book 7
Effective May 4, 2019 • Rev. 05/19
25 Parts Maintenance Kit
Part No. Description List Price
650277 24/25 Maintenance Kit (See below for what is supplied in Kit) 1,807.00
Rell Parts/Packages
Part No. Description
Rell
List Price Each Kit Contents Qty
299 Strike 299 Strike US19 61.00 5
325 SNB 325 Sex Bolt, 1/4-20 US32D (Pkg of 2) 24.00 10
425 SNB 425 Sex Bolt, 10-24 US32D (Pkg of 2) 24.00 10
4208 CD/EA/KOR Cylinder Retaining Bracket 7.00 30
060126 512/718 Lever Washer (Pkg of 10) 6.00 1
3894-000 Cylinder Nut BRS 4.00 10
650311 Rod Guide Kit US32D 55.00 6
650311 Rod Guide Kit SP28 52.00 2
650311 Rod Guide Kit SP313 55.00 2
060109 Hex Dogging Key 7/32" (Pkg of 10) 13.00 1
650231 512 Mtg Pkg US4 1-3/4" Dr 9.00 2
650231 512 Mtg Pkg US10B 1-3/4" Dr 5.00 2
650231 512 Mtg Pkg US26D 1-3/4" Dr 5.00 6
650294 24/25 End Cap Kit US32D 1-3/4" Dr. 38.00 6
650294 24/25 End Cap Kit US26D 1-3/4" Dr. 37.00 2
650294 24/25 End Cap Kit SP28 1-3/4" Dr. 31.00 1
650294 24/25 End Cap Kit SP313 1-3/4" Dr. 35.00 1
600283 511 Trim Shear Pin (Pkg of 5) 10.00 6
640001 24 Device Plastic Mounting Template 4.00 2
640002 25 Device Plastic Mounting Template 4.00 2
650267 510/513 Trim Shear Pin (Pkg of 10) 24.00 3
060112 8500 Lock Housing Screws (Pkg of 10) 6.00 2
060113 24/25-C Latch Screw (Pkg of 10) 6.00 5
060114 Rod Guide Screws (Pkg of 10) 6.00 3
060119 510/511/512/513 Back Plate Screws (Pkg of 10) 6.00 5
600309 25 Lift Finger Screws (Pkg of 2) 10.00 10
600173 8500 Lock Face Screws US3/US4/US10 4.00 10
600173 8500 Lock Face Screws US26D/US32D 4.00 10
600173 8500 Lock Face Screws US10B 4.00 10
060120 8500 Lock Backplate Screws (Pkg of 10) 6.00 5
060121 24/25-V Latch Cover Screws US26D/US32D/US28 (Pkg of 10) 6.00 5
060121 24/25-V Latch Cover Screws US3/US4/US10 (Pkg of 10) 6.00 5
060121 24/25-V Latch Cover Screws US10B (Pkg of 10) 6.00 5
060123 Electric Option Dogging Screw (Pkg of 10) 6.00 5
060122 K-NL/L-NL Spindle Cam Screw (Pkg of 10) 11.00 2
060124 K/L/TL Trim Lock Nut (Pkg of 10) 6.00 1
600305 24/25 Channel Screw (Pkg of 10) 15.00 3
060111 Cotter Key 1/8" x 1" (Pkg of 10) 13.00 5
600279 Cylinder Nut Tool (Pkg of 5) 20.00 2
060125 FSE/FSE Trim Pivot Pin (Pkg of 10) 6.00 2
600319 24/25 Pushbar Guide (Pkg of 2) 11.00 10
600278 25 Trim Cylinder Locknut 11.00 10
060117 25 Center Case Mtg Screws (Pkg of 10) 6.00 5
060118 24 Center Case Housing Screws (Pkg of 10) 6.00 5
060116 25-R/M Device Mounting Screws (Pkg of 10) 7.00 5
060115 FSA/FSE Trim Screws (Pkg of 10) 6.00 5
600307 24/25 Center Case Cover Screws US3 (Pkg of 4) 11.00 12
600307 24/25 Center Case Cover Screws US4 (Pkg of 4) 11.00 12
600307 24/25 Center Case Cover Screws US10 (Pkg of 4) 11.00 12
600307 24/25 Center Case Cover Screws US10B (Pkg of 4) 11.00 12
600307 24/25 Center Case Cover Screws US26D/US32D/SP28 (Pkg of 4) 11.00 12
600277 510/513 Spindle Cam Ret. Ring (Pkg of 10) 10.00 2
600308 25 Housing Plate Screws (Pkg of 2) 10.00 2
970321 299 Strike Shim 12.00 20
201
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Prices subject to change without notice
25 Series
Architectural /
Heavy Duty
PushpadsEXITS
Notes
Price Book 7
Effective May 4, 2019 • Rev. 05/19
202
Prices subject to change without notice
25 Series Architectural /
Heavy Duty Pushpads EXITS
(F)25 rim exit device
Panic and fire
7
6
7
1
2
4
9
32
27
8
11
17
6
Fire
or
Panic
Fire Device Only
Panic Device Only
13
20
203
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Prices subject to change without notice
25 Series
Architectural /
Heavy Duty
PushpadsEXITS
Rim exit device (F)25
No. Qty. Part no. Description Package contents Notes
1 1 650294 25 Channel Endcap Kit 1C\v" Door 1– Channel Endcap A
2– #10-24 x C\," PPHMS
1– Channel Endcap Bracket
2– #10 x 1Z\v" PPHSMS
2– #10-24 x 1" PPHMS
1 650348 25 Channel Endcap Kit 2Z\v" Door 1– Channel Endcap A
2– #10-24 x C\," PPHMS
1– Channel Endcap Bracket
2– #10 x 1Z\v" PPHSMS
2– #10-24 x 1" PPHMS
2 1 661412 25 Channel 3' A
661413 25 Channel 4
4 1 600305 25 Channel Screw package of 10 #10-16 x Z\x" Hex Washer Head Taptite
6 1 600319 25 Pushbar Guide Pkg 2– Pushbar Guide
7 1 600310 25 Pushbar Endcap Kit 2– Pushbar Endcap A
4– #8-18 x C\v" FPHSMS
8 1 600307 25 Center Case Cover Screw Pkg 4– #8-18 x C\," UFPHSMS A
9 1 299 299 Strike C
11 1 650227 F-25 Channel Cover Plate 3' A, B
650228 F-25 Channel Cover Plate 4'
13 1 650191 25 Hex Dogging Kit 3' 1– Panic Channel Cover (3' or 4")
1– Dogging Subassembly
1– #8-32 x C\," UFPHMS
A, B
650192 25 Hex Dogging Kit 4'
17 1 060109 Hex Dogging Key M\cx" package of 10
20 1 650239 25-R Center Case Kit, Panic 1– Center Case
650240 F-25-R Center Case Kit, Fire 2– #10-16 x Z\x" Hex Washer Head Taptite
27 1 650255 (F)25-R Center Case Cover Kit 1– Head Cover A
4– #8-18 x C\," UFPHSMS
32 1 650345 (F)25-R/M Mounting Pkg 1C\v" Door 6– #10 x 1Z\v" PPHSMS *
4– #10-24 x C\v" PPHMS
2– #10-24 x 1" PPHMS
1– Tailpiece Guide *
650293 (F)25-R/M Mounting Pkg 2Z\v" Door 6– #10 x 1Z\v" PPHSMS *
4– #10-24 x 1Z\v" PPHMS
2– #10-24 x 1Z\x" PPHMS
1– Tailpiece Guide *
* Item(s) not shown.
A Specify by nish: US3, US4, US10, US26, US26D, US32, US32D, US28, 313AN
B Specify by nish: US3, US4, US10, US19, US26, US26D, SP313
Price Book 7
Effective May 4, 2019 • Rev. 05/19
204
Prices subject to change without notice
25 Series Architectural /
Heavy Duty Pushpads EXITS
25-V Surface vertical rod exit device
Panic and fire
11
17
Fire
or
Panic
Fire Device Only
Panic Device Only
1
2
4
28
8
6
7
21
19
13
6
7
30
15
18
33
33
No. Qty. Part no. Description Package contents Notes
1 1 650294 25 Channel Endcap Kit 1C\v" Door 1– Channel Endcap A
2– #10-24 x C\," PPHMS
1– Channel Endcap Bracket
2– #10-24 x 1" PPHMS
2– #10 x 1Z\v" PPHSMS
1 1 650348 25 Channel Endcap Kit 2Z\v" Door 1– Channel Endcap A
2– #10-24 x C\," PPHMS
1– Channel Endcap Bracket
2– #10-24 x 1" PPHMS
2– #10 x 1Z\v" PPHSMS
205
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Prices subject to change without notice
25 Series
Architectural /
Heavy Duty
PushpadsEXITS
Surface vertical rod exit device 25-V
No. Qty. Part no. Description Package contents Notes
2 1 661412 25 Channel 3' A
661413 25 Channel 4'
4 1 600305 25 Channel Screw package of 10 10– #10-16 x Z\x" Hex Washer Head Taptite
6 1 600319 25 Pushbar Guide Pkg 2– Pushbar Guide
7 1 600310 25 Pushbar Endcap Kit 2– Pushbar Endcap A
4– #8-18 x C\v" FPHSMS
8 1 600307 25 Center Case Cover Screw Pkg 4– #8-18 x C\," UFPHSMS A
11 1 650227 F-25 Channel Cover Plate 3' A
650228 F-25 Channel Cover Plate 4'
13 1 650191 25 Hex Dogging Kit 3' 1– Panic Channel Cover (3' or 4")
1– Dogging Subassembly
1– #8-32 x C\," UFPHMS
A
650192 25 Hex Dogging Kit 4'
15 1 600309 25-V/C Finger Screw Pkg 2– #10-24 x C\," UFPHMS
17 1 060109 Hex Dogging Key M\cx" package of 10
18 1 600308 25-V/M/C Center Case Housing Screw Pkg 2– #8-32 x C\," PPHMS Trilob
19 1 650261 25-V/M/C Center Case Housing Kit 2– #8-32 x C\," PPHMS Trilob
1– Vertical Housing
21 1 650242 (F)25-V Center Case Kit 1– Center Case
2– #10-16 x Z\x" Hex Washer Head Taptite
28 1 650257 (F)25-V Center Case Cover Kit 1– Head Cover A
4– #8-18 x C\," UFPHSMS
30 1 650262 25-V Center Case Finger Kit 2– #10-24 x C\," UFPHMS
1–Vertical Finger
33 1 650315 25-V Mounting Pkg 1C\v" – 2Z\v" Door 6– #10 x 1Z\v" PPHSMS *
4– #10 x 1Z\v" FPHSMS *
1– Z\, x 1" Cotter Key *
1– Dogging Key
650316 F-25-V Mounting Pkg 1C\v" Door 6– #10-24 x C\v" PPHMS
4– #10-24 x C\v" FPHMS *
1– Z\, x 1" Cotter Key *
650295 F-25-V Mounting Pkg 2Z\v" Door 6– #10-24 x 1Z\v" PPHMS *
4– #10-24 x 1Z\v" FPHMS *
1– Z\," x 1" Cotter Key *
* Item(s) not shown.
A Specify by nish: US3, US4, US10, US26, US26D, US32, US32D, US28, 313AN
Price Book 7
Effective May 4, 2019 • Rev. 05/19
206
Prices subject to change without notice
25 Series Architectural /
Heavy Duty Pushpads EXITS
(F)25-V Surface vertical rods and latches
40
43
42
39
42
46
45
44
47
50
41
33
44
39
33
33
37
36
38
Panic and fire
207
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Prices subject to change without notice
25 Series
Architectural /
Heavy Duty
PushpadsEXITS
Surface vertical rods and latches (F)25-V
No. Qty. Part no. Description Package contents Notes
33 1 650315 25-V Mounting Pkg 1C\v" – 2Z\v" Door 4– #10 x 1Z\v" FPHSMS *
6– #10 x 1Z\v" PPHSMS *
1– Z\, x 1" Cotter Key
1– Dogging Key *
650316 F-25-V Mounting Pkg 1C\v" Door 4– #10-24 x C\v" FPHMS *
6– #10-24 x C\v" PPHMS
1– Z\, x 1" Cotter Key
650295 F-25-V Mounting Pkg 2Z\v" Door 4– #10-24 x 1Z\v" FPHMS *
6– #10-24 x 1Z\v" PPHMS *
1– Z\," x 1" Cotter Key
36 1 3788 Vertical Rod Top Strike
37 2 660002 #10 x 1Z\v" FPHSMS
38 1 2130 Vertical Rod Bottom Strike
39 1 650336 25-V Latch Case Cover Mounting Pkg 4– #8-32 x Z\v" UFPHMS
40 1 650389 25-V Top Latch Case
650375 F-25-V Top Latch Case
41 1 060111 Z\," x 1" Cotter Key package of 10
42 2 650202 25-V Latch Case Cover Kit A
43 13777 25-V Top Rod Kit A
44 2 650311 25-V Rod Guide Kit A
45 1 610055 25-V Bottom Rod Kit A
46 1 650387 25-V Bottom Bolt Guide A
47 1 650006 Vertical Extension Rod 12" A
650007 Vertical Extension Rod 24"
650008 Vertical Extension Rod 36"
50 1 5494 Auxiliary Fire Pin Kit
(Less Bottom Rod application only)
* Item(s) not shown.
A Specify by nish: US3, US4, US10, US26, US26D, US32, US32D, US28, 313AN
Price Book 7
Effective May 4, 2019 • Rev. 05/19
208
Prices subject to change without notice
25 Series Architectural /
Heavy Duty Pushpads EXITS
(F)25-C Concealed vertical rod exit device
Panic and fire
12
11
17
Fire
or
Panic
Fire Device Only
Panic Device Only
2
6
8
6
1
22
31
29
4
13
15
19
18
7
7
209
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Prices subject to change without notice
25 Series
Architectural /
Heavy Duty
PushpadsEXITS
Concealed vertical rod exit device (F)25-C
No. Qty. Part no. Description Package contents Notes
1 1 650294 25 Channel Endcap Kit 1C\v" Door 1– Channel Endcap A
2– #10-24 x C\," PPHMS
1– Channel Endcap Bracket
2– #10-24 x 1" PPHMS
2– #10 x 1Z\v" PPHSMS
1 650348 25 Channel Endcap Kit 2Z\v" Door 1– Channel Endcap A
2– #10-24 x C\," PPHMS
1– Channel Endcap Bracket
2– #10-24 x 1" PPHMS
2– #10 x 1Z\v" PPHSMS
2 1 661412 25 Channel 3' A
661413 25 Channel 4'
4 1 600305 25 Channel Screw package of 10 #10-16 x Z\x" Hex Washer Head Taptite
6 1 600319 25 Pushbar Guide Pkg 2– Pushbar Guide
7 1 600310 25 Pushbar Endcap Kit 2– Pushbar Endcap A
4– #8-18 x C\v" FPHSMS
8 1 600307 25 Center Case Cover Screw Pkg 4– #8-18 - C\," UFPHSMS A
11 1 650227 F-25 Channel Cover Plate 3' A, B
650228 F-25 Channel Cover Plate 4'
13 1 650191 25 Hex Dogging Kit 3' 1– Panic Channel Cover (3' or 4')
1– Dogging Subassembly
1– #8-32 x C\," UFPHMS
A, B
650192 25 Hex Dogging Kit 4'
15 1 600309 25-V/C Center Case Finger Screw Pkg 2– #10-24 x C\," UFPHMS
17 1 060109 Hex Dogging Key M\cx" package of 10
18 1 600308 25-V/M/C Center Case Housing Screw Pkg 2– #8-32 x C\," PPHMS Trilob Housing
19 1 650261 25-V/M/C Center Case Housing Kit 2– #8-32 x C\," PPHMS Trilob Housing
1– Vertical Housing
22 1 650244 25-C, CWDC Center Case Kit 1– Center Case
2– #10-16 x Z\x" Hex Washer Head Taptite
29 1 650259 (F)25-C/M Center Case Cover Kit 1– Center Case A
4– #8-18 - C\," UFPHSMS
31 1 650263 25-C Center Case Finger Kit 2– #10-24 x C\," UFPHMS
1– Concealed Finger
A Specify by nish: US3, US4, US10, US26, US26D, US32, US32D, US28, 313AN
Price Book 7
Effective May 4, 2019 • Rev. 05/19
210
Prices subject to change without notice
25 Series Architectural /
Heavy Duty Pushpads EXITS
(F)25-C and F-25-C-WDC-90 Concealed vertical rods and latches
65
48
50
41
34b
62
63
64
67
60
34b
34c
34e
34a
51
17
34d
34n
52
53
34f
F-25-C
F-25-WDC-90
F-25-WDC-90
34n
For panic
devices only
61
25-C
Metal door—panic and fire, wood door—90 minute fire device
25-C Panic Device shown
No. Qty. Part no. Description Package contents Notes
17 1 060109 Hex Dogging Key M\cx" package of 10
34 1 650317 F-25-C Mounting Pkg 1C\v" Door 34a 8– #10-24 x C\v" PPHMS
34b 7– #10-24 x C\v" FPHMS
34c 2– #8-32 x C\," UFPHMS
34d 1– Z\, x 1" Cotter Key
—2– Z\v-20 x C\v" PPHMS *
211
Prices subject to change without notice
25 Series
Architectural /
Heavy Duty
PushpadsEXITS
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Concealed vertical rods and latches (F)25-C and F-25-C-WDC-90
No. Qty. Part no. Description Package contents Notes
34 1 650318 25-C Mounting Pkg 1C\v" Door 34a 8– #10 x 1Z\v" PPHSMS *
34b 6– #10-24 x C\v" FPHMS
34c 2– #8-32 x C\," UFPHMS
34d 1– Z\, x 1" Cotter Key
34e 1– Dogging Key
— 2– #14 x 1" PPHSMS *
650299 F-25-CWDC Mounting Pkg 1C\v" Door 34a 4– #10 x 1Z\v" PPHSMS *
34a 8– #10-24 x C\v" PPHMS
34b 3– #10 x 1Z\v" FPHSMS *
34c 2– #8-32 x C\," UFPHMS
34d 1– Z\, x 1" Cotter Key
34f 2– Latch Bracket (Sold Separately #4694-089)
34n 6– #10-24 x C\v" FPHMS
650296 F-25-CWDC Mounting Pkg 2Z\v" Door 34a 4– #10 x 1Z\v" PPHSMS *
34a 8– #10-24 x C\v" PPHMS
34b 3– #10 x 1Z\v" FPHSMS *
34c 2– #8-32 x C\," UFPHMS
34d 1– Z\, x 1" Cotter Key
34f 2– Latch Bracket
(Sold Separately #4694-089)
34n 6– #10-24 x C\v" FPHMS
650300 25-C Mounting Pkg 2Z\v" Door 34a 8– #10 x 1Z\v" PPHSMS *
34b 6– #10-24 x 1Z\v" FPHMS
34c 2– #8-32 x C\," UFPHMS
34d 1– Z\, x 1" Cotter Key
34e 1– Dogging Key
— 2– #14 x 1" PPHSMS *
650346 F-25-C Mounting Pkg 2Z\v" Door 34a 8– #10-24 x 1Z\v" PPHMS
34b 7– #10-24 x 1Z\v" FPHMS
34c 2– #8-32 x C\," UFPHMS
34d 1– Z\, x 1" Cotter Key
—2– Z\v-20 x 1Z\v" PPHMS *
41 1 060111 Z\, x 1" Cotter Key package of 10
48 1 650017 Concealed Vertical Extension Rod 12"
650018 Concealed Vertical Extension Rod 24"
650019 Concealed Vertical Extension Rod 36"
50 1 5494 Auxiliary Fire Latch Kit (Less Bottom Rod applica-
tion only)
51 1 603L 25-C, CWDC Top Latch Case LHR
603R 25-C, CWDC Top Latch Case RHR
52 1 F603 F-25-C Top Latch Case
53 2 4694 F-25 CWDC Latch Bracket
60 1 4188 Concealed Vertical Top Rod Strike
61 1 650339 (F)25-C, CWDC Top Latch Release Kit A
62 1 610061 (F)25-C, CWDC Top Rod Kit
63 1650376 (F)25-C, CWDC Center Slide Assembly
64 1 610057 (F)25-C, CWDC Bottom Rod Kit
65 1 4567 25-C Bottom Bolt Guide
67 1 2130 Vertical Rod Bottom Strike
* Items for 24 Series devices only, not shown.
A Specify by nish: US3, US4, US10, US26, US26D, US32, US32D, US28, 313AN
Price Book 7
Effective May 4, 2019 • Rev. 05/19
212
Prices subject to change without notice
25 Series Architectural /
Heavy Duty Pushpads EXITS
25-C-WDC and F-25-C-WDC-20 Concealed vertical rods and latches
Wood door—panic devices, wood door—20 minute fire device
50
66
41
35b
52
62
63
64
61
35a
54
35b
35h
55
56
48
35c
35f
35e
35d
35a
35n
35g
F-25-C-WDC-20 Device shown
REFERENCE NOTE:
F-25-C-WDC-20 is no longer available for purchase. Parts listed for installed SERVICE ONLY.
213
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Prices subject to change without notice
25 Series
Architectural /
Heavy Duty
PushpadsEXITS
Concealed vertical rods and latches 25-C-WDC and F-25-C-WDC-20
No. Qty. Part no. Description Package contents Notes
17 1 060109 Hex Dogging Key M\cx" package of 10
35 1 650299 F-25-CWDC Mounting Pkg 1C\v" Door 35a 8– #10 x 1Z\v" PPHSMS A
— 4– #10-24 x 1" PPHMS
35b 11– #10 x 1Z\v" FPHSMS
35c 2– #8-32 x C\," UFPHMS
35d 1– Z\, x 1" Cotter Key
35e 2– C\v" CS Plate Mtg Screw
35f 4– Z\v-20 x C\v" FPHMS
35g 4– Z\v" CS Washer
35h 6– Z\v-20 Sexbolt
35n 4– #10-24 x C\v" FPHMS
650296 25-CWDC Mounting Pkg 2Z\v" Door 35a 8– #10 x 1Z\v" PPHSMS A
—4– #10-24 x 1Z\x" PPHMS
35b 11– #10 x 1Z\v" FPHSMS
35c 2– #8-32 x C\," UFPHMS
35d 1– Z\, x 1" Cotter Key
35e 2– C\v" CS Plate Mtg Screw
35f 4– Z\v-20 x 1Z\v" FPHMS
35g 4– Z\v" CS Finish Washer
35h 6– Z\v-20 Sexbolt
35n 2– #10-24 x C\v" FPHMS
41 1 060111 Z\, x 1" Cotter Key package of 10
48 1 650017 Concealed Vertical Extension Rod 12"
650018 Concealed Vertical Extension Rod 24"
650019 Concealed Vertical Extension Rod 36"
49 1 WF603 F-25-CWDC Top Latch Case *
50 1 5494 Auxiliary Fire Latch Kit (Less Bottom Rod appli-
cation only)
52 1 F603 F-25-C Top Latch Case
54 1 4833 Top Reinforcement Plate A
55 1 4834 Top Reinforcement Plate with Access Hole A
56 1 4832 (F)25-CWDC Center Slide Reinforcement Plate
61 1 650339 (F)25-C, CWDC Top Latch Release Kit A
62 1 610061 (F)25-C, CWDC Top Rod Kit
63 1650376 (F)25-C, CWDC Center Slide Assembly
64 1 610057 (F)25-C, CWDC Bottom Rod Kit
66 1 4835 25-CWDC Bottom Bolt Guide
* Item(s) not shown.
A Specify by nish: US3, US4, US10, US26, US26D, US32, US32D, US28, 313AN
Price Book 7
Effective May 4, 2019 • Rev. 05/19
214
Prices subject to change without notice
25 Series Architectural /
Heavy Duty Pushpads EXITS
(F)25-M Mortise exit device
Panic and fire
11
17
Fire
or
Panic
Fire Device Only
Panic Device Only
1
2
6
29
8
6
7
23
4
7
24
19
18
32
13
15
No. Qty. Part no. Description Package contents Notes
1 1 650294 25 Channel Endcap Kit 1C\v" Door 1– Channel Endcap A
2– #10-24 x C\," PPHMS
1– Channel Endcap Bracket
2– #10-24 x 1" PPHMS
2– #10 x 1Z\v" PPHSMS
215
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Prices subject to change without notice
25 Series
Architectural /
Heavy Duty
PushpadsEXITS
Mortise exit device (F)25-M
No. Qty. Part no. Description Package contents Notes
1 1 650348 25 Channel Endcap Kit 2Z\v" Door 1– Channel Endcap A
2– #10-24 x C\," PPHMS
1– Channel Endcap Bracket
2– #10-24 x 1" PPHMS
2– #10 x 1Z\v" PPHSMS
2 1 661412 25 Channel 3' A
661413 25 Channel 4'
4 1 600305 25 Channel Screw package of 10 #10-16 x Z\x" Hex Washer Head Taptite
6 1 600319 25 Pushbar Guide Pkg 2– Pushbar Guide
7 1 600310 25 Pushbar Endcap Kit 2– Pushbar Endcap A
4– #8-18 x C\v" FPHSMS
8 1 600307 25 Center Case Cover Screw Pkg 4– #8-18 x C\," UFPHSMS A
11 1 650227 F-25 Channel Cover Plate 3' B
650228 F-25 Channel Cover Plate 4'
13 1 650191 25 Hex Dogging Kit 3' 1– Panic Channel Cover (3' or 4')
1– Dogging Subassembly
1– #8-32 x C\," UFPHMS
A
650192 25 Hex Dogging Kit 4'
15 1 650377 25-M Center Case Slide Bar Assembly LHR C
650378 25-M Center Case Slide Bar Assembly RHR
17 1 060109 Hex Dogging Key M\cx" package of 10
18 1 600308 25-V/M/C Housing Screw Pkg 2– #8-32 x C\," PPHMS Trilob
19 1 650261 25-V/M/C Housing Kit 2– #8-32 x C\," PPHMS Trilob
1– Vertical Housing
23 1 650246 (F)25-M Center Case Kit, RHR 1– Center Case
2– #10-16 x Z\x" Hex Washer Head Taptite
1– Mortise Finger
650398 (F)25-M Center Case Kit, LHR 1– Mortise Block
2– #10-24 x C\," UFPHMS
24 1 8500 Mortise Lock Assembly 1– Mortise Lock
2– #12-24 x Z\x" UFPHMS
29 1 650259 (F)25-C, M Center Case Cover Kit 1– Center Case Cover A
4– #8-18 x C\," UFPHSMS
32 1 650345 (F)25-R/M Mounting Pkg 1C\v" Door 6– #10 x 1Z\v" PPHSMS *
4– #10-24 x C\v" PPHMS
2– #10-24 x 1" PPHMS *
1– Tailpiece Guide *
650293 (F)25-R/M Mounting Pkg 2Z\v" Door 6– #10 x 1Z\v" PPHSMS *
4– #10-24 x 1Z\v" PPHMS
2– #10-24 x 1Z\x" PPHMS *
1– Tailpiece Guide *
* Item(s) not shown.
A Specify by nish: US3, US4, US10, US26, US26D, US32, US32D, US28, 313AN
B Lift Finger is pre-installed on the Slide Bar Assembly. Screws secured with Loctite®.
216
Prices subject to change without notice
24 Series Architectural /
Heavy Duty Pushpads EXITS
Price Book 7
Effective May 4, 2019 • Rev. 05/19
24-R Device Series
3' Devices are priced with standard trim and strikes, 4' add $19 list.
Cylinders are not included in the price.
EXIT HARDWARE
Rim Devices
(Includes 299 Strike)
Trim/Control US28 US32D 313AN
US19*
US26D US26 US32 US10 US4
US3
643E*
US15*
* 24-R-EO ―1122 1410 1189 1365 1416 1444 1416 1444 1542
* 24-R-NL-OP (Supplied as NL less trim) 1122 1410 1189 1365 1416 1444 1416 1444 1542
Delta Trim (handed and eld reversible)
24-R-DT 717DT 1301 1666 1408 1621 1672 1700 1595 1623 1798
24-R-DT 718DT 1467 1686 1386 1641 1692 1720 1761 1789 1818
* 24-R-NL 718NL* 1301 1666 1408 1621 1672 1700 1595 1623 1798
* 24-R-C 718C* 1261 1607 1368 1562 1613 1641 1555 1583 1739
Knob Control (handed and eld reversible)
24-R-K 711K 1289 1716 1432 1671 1722 1750 1583 1611 1848
24-R-K-BE 711K-BE 1289 1716 1432 1671 1722 1750 1583 1611 1848
24-R-K-NL 711K-NL 1289 1716 1432 1671 1722 1750 1583 1611 1848
Dane Lever Control (handed and eld reversible)
* 24-R-L 712L* 1458 1787 1541 1742 1793 1821 1752 1780 1919
* 24-R-L-BE 712L-BE* 1458 1787 1541 1742 1793 1821 1752 1780 1919
* 24-R-L-NL 712L-NL* 1458 1787 1541 1742 1793 1821 1752 1780 1919
* 24-R-L-DT 712L-DT* 1458 1787 1541 1742 1793 1821 1752 1780 1919
* These devices and 712L, 712L-BE, 712L-NL, 712L-DT, 718C, 718NL trims are available in 643E, US15 and US19 nishes.
REFERENCE NOTES:
24 Series ordered in 313AN will be supplied with trims in SP313.
Handing: Trims are furnished RHR when handing is not specied.
24 Rim, comes with dead latching as a standard effective April 3, 2017.
Sex Bolts:
Optional Sex Bolts are recommended for center case mounting when device is used with hollow core wood,
composite or light gauge hollow metal doors. See chart below for quantities and list prices.
Application
Sex Bolt 325
(Optional)
Sex Bolt 425
(Optional) List Add
Hollow core wood, composite or light gauge hollow metal doors - EO (exit only device) 2 4 72
Hollow core wood, composite or light gauge hollow metal doors - Device with Trim Not Required 4 48
217
Prices subject to change without notice
24 Series
Architectural /
Heavy Duty
PushpadsEXITS
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Device Series F-24-R
3' Devices are priced with standard trim and strikes, 4' add $19 list.
Cylinders are not included in the price.
EXIT HARDWARE
Rim Devices
(Includes 299F Strike)
Trim/Control US28 US32D 313AN
US19*
US26D US26 US32 US10 US4
US3
643E*
US15*
* F-24-R-EO 1325 1613 1392 1568 1619 1647 1619 1647 1745
* F-24-R-NL-OP (Supplied as NL less trim) 1325 1613 1392 1568 1619 1647 1619 1647 1745
Delta Trim (handed and eld reversible)
F-24-R-DT 717DT 1504 1869 1611 1824 1875 1903 1798 1826 2001
F-24-R-DT 718DT 1670 1889 1589 1844 1895 1923 1964 1992 2021
* F-24-R-NL 718NL* 1504 1869 1611 1824 1875 1903 1798 1826 2001
* F-24-R-C 718C* 1464 1810 1571 1765 1816 1844 1758 1786 1942
Knob Control (handed and eld reversible)
F-24-R-K 711K 1492 1919 1635 1874 1925 1953 1786 1814 2051
F-24-R-K-BE 711K-BE 1492 1919 1635 1874 1925 1953 1786 1814 2051
F-24-R-K-NL 711K-NL 1492 1919 1635 1874 1925 1953 1786 1814 2051
Dane Lever Control (handed and eld reversible)
* F-24-R-L 712L* 1661 1990 1744 1945 1996 2024 1955 1983 2122
* F-24-R-L-BE 712L-BE* 1661 1990 1744 1945 1996 2024 1955 1983 2122
* F-24-R-L-NL 712L-NL* 1661 1990 1744 1945 1996 2024 1955 1983 2122
* F-24-R-L-DT 712L-DT* 1661 1990 1744 1945 1996 2024 1955 1983 2122
* These devices and 712L, 712L-BE, 712L-NL, 712L-DT, 718C, 718NL trims are available in 643E, US15 and US19 nishes.
REFERENCE NOTES:
24 Series ordered in 313AN will be supplied with trims in SP313.
Handing: Trims are furnished RHR when handing is not specied.
Sex Bolts:
Sex Bolts are supplied for center case mounting when device is used with wood, composite or non-reinforced
hollow metal doors.
Application
Sex Bolt 325
(Supplied)
Sex Bolt 425
(Supplied)
Wood, composite or non-reinforced hollow metal doors - EO (exit only device) 2 4
Wood, composite or non-reinforced hollow metal doors - Device with Trim Not Required 4
218
Prices subject to change without notice
24 Series Architectural /
Heavy Duty Pushpads EXITS
Price Book 7
Effective May 4, 2019 • Rev. 05/19
24-V Device Series
3' Devices are priced with standard trim and strikes, 4' add $19, 2' add $123 list.
Cylinders are not included in the price.
EXIT HARDWARE
Surface Vertical Rod Devices
(Includes 3788 and 2130 Strikes)
Trim/Control US28 US32D 313AN
US19*
US26D US26 US32 US10 US4
US3
643E*
US15*
* 24-V-EO 1466 1862 1553 1792 1862 1897 1862 1897 2008
* 24-V-NL-OP (Supplied as NL less trim) 1466 1862 1553 1792 1862 1897 1862 1897 2008
Delta Trim (handed and eld reversible)
24-V-DT 717DT 1645 2118 1772 2048 2118 2153 2041 2076 2264
24-V-DT 718DT 1811 2138 1750 2068 2138 2173 2207 2242 2284
* 24-V-NL 718NL* 1645 2118 1772 2048 2118 2153 2041 2076 2264
* 24-V-C 718C* 1605 2059 1732 1989 2059 2094 2001 2036 2205
Knob Control (handed and eld reversible)
24-V-K 711K 1633 2168 1796 2098 2168 2203 2029 2064 2314
24-V-K-BE 711K-BE 1633 2168 1796 2098 2168 2203 2029 2064 2314
24-V-K-NL 711K-NL 1633 2168 1796 2098 2168 2203 2029 2064 2314
Dane Lever Control (handed and eld revers-
ible)
* 24-V-L 712 L* 1802 2239 1905 2169 2239 2274 2198 2233 2385
* 24-V-L-BE 712L-BE* 1802 2239 1905 2169 2239 2274 2198 2233 2385
* 24-V-L-NL 712L-NL* 1802 2239 1905 2169 2239 2274 2198 2233 2385
* 24-V-L-DT 712L-DT* 1802 2239 1905 2169 2239 2274 2198 2233 2385
* These devices and 712L, 712L-BE, 712L-NL, 712L-DT, 718C, 718NL trims are available in 643E, US15 and US19 nishes.
REFERENCE NOTES:
24 Series ordered in 313AN will be supplied with trims in SP313.
24-V Device ordered in US15 will be supplied with US32D Rod and Latch Cover.
Handing: 24-V devices and noted Trims are handed and eld reversible. The Device and Trims are furnished RHR when handing is not specied.
Extension Rods: For door heights over 7'0" up to 8'0", 12" extension rods are furnished at no additional charge at the time of device order. For door
heights over 8'0" up to 10'0" extension rods are furnished at prices shown in parts section with the device at the time of order.
MUST specify door height on order line.
Sex Bolts:
Optional Sex Bolts are recommended for center case and latch mounting when device is used with hollow core wood,
composite or light gauge hollow metal doors. See chart below for quantities and list prices.
Application
Latches
Sex Bolt 2729
(Optional)
Device
Sex Bolt 425
(Optional)
Device
Sex Bolt 325
(Optional) List Add
Hollow core wood, composite or light gauge hollow metal doors - EO (exit only device) 6 2 2 102.00
Hollow core wood, composite or light gauge hollow metal doors - Device with Trim 6 2 Not Required 78.00
Hollow core wood, composite or light gauge hollow metal doors - EO (exit only device) LBR 3 2 2 75.00
Hollow core wood, composite or light gauge hollow metal doors - Device with Trim LBR 3 2 Not Required 51.00
219
Prices subject to change without notice
24 Series
Architectural /
Heavy Duty
PushpadsEXITS
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Device Series F-24-V
3' Devices are priced with standard trim and strikes, 4' add $19 list, 2' add $123 list.
Cylinders are not included in the price.
FIRE EXIT HARDWARE
Surface Vertical Rod Devices
(Includes 3788 and 2130 Strikes)
Trim/Control US28 US32D 313AN
US19*
US26D US26 US32 US10 US4
US3
643E*
US15*
* F-24-V-EO ―1653 2049 1740 1979 2049 2084 2049 2084 2195
* F-24-V-NL-OP (Supplied as NL less trim) 1653 2049 1740 1979 2049 2084 2049 2084 2195
Delta Trim (handed and eld reversible)
F-24-V-DT 717DT 1832 2305 1959 2235 2305 2340 2228 2263 2451
F-24-V-DT 718DT 1998 2325 1937 2255 2325 2360 2394 2429 2471
* F-24-V-NL 718NL* 1832 2305 1959 2235 2305 2340 2228 2263 2451
* F-24-V-C 718C* 1792 2246 1919 2176 2246 2281 2188 2223 2392
Knob Control (handed and eld reversible)
F-24-V-K 711K 1820 2355 1983 2285 2355 2390 2216 2251 2501
F-24-V-K-BE 711K-BE 1820 2355 1983 2285 2355 2390 2216 2251 2501
F-24-V-K-NL 711K-NL 1820 2355 1983 2285 2355 2390 2216 2251 2501
Dane Lever Control (handed and eld reversible)
* F-24-V-L 712L* 1989 2426 2092 2356 2426 2461 2385 2420 2572
* F-24-V-L-BE 712L-BE* 1989 2426 2092 2356 2426 2461 2385 2420 2572
* F-24-V-L-NL 712L-NL* 1989 2426 2092 2356 2426 2461 2385 2420 2572
* F-24-V-L-DT 712L-DT* 1989 2426 2092 2356 2426 2461 2385 2420 2572
* These devices and 712L, 712L-BE, 712L-NL, 712L-DT, 718C, 718NL trims are available in 643E, US15 and US19 nishes.
REFERENCE NOTES:
24 Series ordered in 313AN will be supplied with trims in SP313.
24-V Device ordered in US15 will be supplied with US32D Rod and Latch Cover.
Handing: F-24-V devices and noted Trims are handed and eld reversible. The Device and Trims are furnished RHR when handing is not specied.
Extension Rods: For door heights over 7'0" up to 8'0", 12" extension rods are furnished at no additional charge at the time of device order.
For door heights over 8'0" up to 10'0" extension rods are furnished at prices shown in parts section with the device at the time of order.
MUST specify door height on order line.
Sex Bolts:
One 4122 Sex Bolt is supplied standard no charge for hinge side mounting. Sex Bolts are supplied for
center case and latch mounting when device is used with wood, composite or non-reinforced hollow metal doors.
Application
Latches
Sex Bolt 2729
(Supplied)
Device
Sex Bolt 425
(Supplied)
Device
Sex Bolt 325
(Supplied)
Wood, composite or non-reinforced hollow metal doors - EO (exit only device) 6 2 2
Wood, composite or non-reinforced hollow metal doors - Device with Trim 6 2 Not Required
Wood, composite or non-reinforced hollow metal doors - EO (exit only device) LBR 3 2 2
Wood, composite or non-reinforced hollow metal doors - Device with Trim LBR 3 2 Not Required
220
Prices subject to change without notice
24 Series Architectural /
Heavy Duty Pushpads EXITS
Price Book 7
Effective May 4, 2019 • Rev. 05/19
24-C Device Series
3' Devices are priced with standard trim and strikes, 4' add $19 list, 2' add $123 list.
Cylinders are not included in the price.
EXIT HARDWARE
Concealed Vertical Rod Devices
(Includes Strikes 4188 and 2130)
Trim/Control US28 US32D 313AN
US19*
US26D US26 US32 US10 US4
US3
643E*
US15*
* 24-C-EO 1539 1921 1634 1882 1959 1997 1959 1997 2111
Delta Trim (handed and eld reversible)
24-C-DT 717DT 1718 2177 1853 2138 2215 2253 2138 2176 2367
24-C-DT 718DT 1884 2197 1831 2158 2235 2273 2304 2342 2387
* 24-C-NL 718NL* 1718 2177 1853 2138 2215 2253 2138 2176 2367
* 24-C-C 718C* 1678 2118 1813 2079 2156 2194 2098 2136 2308
Knob Control (handed and eld reversible)
24-C-K 711K 1706 2227 1877 2188 2265 2303 2126 2164 2417
24-C-K-BE 711K-BE 1706 2227 1877 2188 2265 2303 2126 2164 2417
24-C-K-NL 711K-NL 1706 2227 1877 2188 2265 2303 2126 2164 2417
Dane Lever Control (handed and eld reversible)
* 24-C-L 712L* 1875 2298 1986 2259 2336 2374 2295 2333 2488
* 24-C-L-BE 712L-BE* 1875 2298 1986 2259 2336 2374 2295 2333 2488
* 24-C-L-NL 712L-NL* 1875 2298 1986 2259 2336 2374 2295 2333 2488
* 24-C-L-DT 712L-DT* 1875 2298 1986 2259 2336 2374 2295 2333 2488
* These devices and 712L, 712L-BE, 712L-NL, 712L-DT, 718C, 718NL trims are available in 643E, US15 and US19 nishes.
REFERENCE NOTES:
24 Series ordered in 313AN will be supplied with trims in SP313.
Handing: All 24-C Devices and Trims are handed and eld reversible. The Device and Trims are furnished RHR when handing is not specied.
Extension Rods: For door heights over 7'0" up to 8'0", 12" extension rods are furnished at no additional charge at the time of device order. Must specify
door height on order line. For door heights over 8'0" up to 10'0" extension rods are furnished at prices shown in parts section with the device at the time of
order. MUST specify door height on order line.
Sex Bolts:
Optional Sex Bolts are recommended for center case when device is used with light gauge hollow metal doors.
See chart below for quantities and list prices.
Application
Device
Sex Bolt 425
(Optional)
Device
Sex Bolt 325
(Optional) List Add
Light gauge hollow metal doors - EO (exit only device) 2 2 48
Light gauge hollow metal doors - Device with Trim 2 Not Required 24
221
Prices subject to change without notice
24 Series
Architectural /
Heavy Duty
PushpadsEXITS
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Device Series F-24-C
3' Devices are priced with standard trim and strikes, 4' add $19 list, and 2' add $123 list.
Cylinders are not included in the price.
FIRE EXIT HARDWARE
Concealed Vertical Rod Devices
(Includes Strikes 4188 and 2130)
Trim/Control US28 US32D 313AN
US19*
US26D US26 US32 US10 US4
US3
643E*
US15*
* F-24-C-EO ―1726 2108 1821 2069 2146 2184 2146 2184 2298
Delta Trim (handed and eld reversible)
F-24-C-DT 717DT 1905 2364 2040 2325 2402 2440 2325 2363 2554
F-24-C-DT 718DT 2071 2384 2018 2345 2422 2460 2491 2529 2574
* F-24-C-NL 718NL* 1905 2364 2040 2325 2402 2440 2325 2363 2554
* F-24-C-C 718C* 1865 2305 2000 2266 2343 2381 2285 2323 2495
Knob Control (handed and eld reversible)
F-24-C-K 711K 1893 2414 2064 2375 2452 2490 2313 2351 2604
F-24-C-K-BE 711K-BE 1893 2414 2064 2375 2452 2490 2313 2351 2604
F-24-C-K-NL 711K-NL 1893 2414 2064 2375 2452 2490 2313 2351 2604
Dane Lever Control (handed and eld reversible)
* F-24-C-L 712L* 2062 2485 2173 2446 2523 2561 2482 2520 2675
* F-24-C-L-BE 712L-BE* 2062 2485 2173 2446 2523 2561 2482 2520 2675
* F-24-C-L-NL 712L-NL* 2062 2485 2173 2446 2523 2561 2482 2520 2675
* F-24-C-L-DT 712L-DT* 2062 2485 2173 2446 2523 2561 2482 2520 2675
* These devices and 712L, 712L-BE, 712L-NL, 712L-DT, 718C, 718NL trims are available in 643E, US15 and US19 nishes.
REFERENCE NOTES:
24 Series ordered in 313AN will be supplied with trims in SP313.
Handing: All F-24-C Devices and Trims are handed and eld reversible. The Device and Trims are furnished RHR when handing is not specied.
Extension Rods: For door heights over 7'0" up to 8'0", 12" extension rods are furnished at no additional charge at the time of device order.
For door heights over 8'0" up to 10'0" extension rods are furnished at prices shown in parts section with the device at the time of order.
MUST specify door height on order line.
Sex Bolts:
Sex Bolts are supplied for center case mounting when device is used with non-reinforced hollow metal doors.
See chart below for quantities.
Application
Device
Sex Bolt 425
(Supplied)
Device
Sex Bolt 325
(Supplied)
Non-reinforced hollow metal doors - EO (exit only device) 2 2
Non-reinforced hollow metal doors - Device with Trim 2 Not Required
222
Prices subject to change without notice
24 Series Architectural /
Heavy Duty Pushpads EXITS
Price Book 7
Effective May 4, 2019 • Rev. 05/19
24-CWDC Device Series
3' Devices are priced with standard trim and strikes, 4' add $19 list, 2' add $123 list.
Cylinders are not included in the price.
EXIT HARDWARE
Wood Door Concealed Vertical Rod Devices
(Includes Strikes 4188 and 2130)
Trim/Control US28 US32D 313AN
US19*
US26D US26 US32 US10 US4
US3
643E*
US15*
* 24-CWDC-EO ―1875 2342 1991 2292 2386 2433 2386 2433 2573
Delta Trim (handed and eld reversible)
24-CWDC-DT 717DT 2054 2598 2210 2548 2642 2689 2565 2612 2829
24-CWDC-DT 718DT 2220 2618 2188 2568 2662 2709 2731 2778 2849
* 24-CWDC-NL 718NL* 2054 2598 2210 2548 2642 2689 2565 2612 2829
* 24-CWDC-C 718C* 2014 2539 2170 2489 2583 2630 2525 2572 2770
Knob Control (handed and eld reversible)
24-CWDC-K 711K 2042 2648 2234 2598 2692 2739 2553 2600 2879
24-CWDC-K-BE 711K-BE 2042 2648 2234 2598 2692 2739 2553 2600 2879
24-CWDC-K-NL 711K-NL 2042 2648 2234 2598 2692 2739 2553 2600 2879
Dane Lever Control (handed and eld reversible)
* 24-CWDC-L 712L* 2211 2719 2343 2669 2763 2810 2722 2769 2950
* 24-CWDC-L-BE 712L-BE* 2211 2719 2343 2669 2763 2810 2722 2769 2950
* 24-CWDC-L-NL 712L-NL* 2211 2719 2343 2669 2763 2810 2722 2769 2950
* 24-CWDC-L-DT 712L-DT* 2211 2719 2343 2669 2763 2810 2722 2769 2950
* These devices and 712L, 712L-BE, 712L-NL, 712L-DT, 718C, 718NL trims are available in 643E, US15 and US19 nishes.
REFERENCE NOTES:
24 Series ordered in 313AN will be supplied with trims in SP313.
Handing: All 24-CWDC Devices and Trims are handed and eld reversible. The Device and Trims are furnished RHR when handing is not specied.
Extension Rods: For door heights over 7'0" up to 8'0", 12" extension rods are furnished at no additional charge at the time of device order.
For door heights over 8'0" up to 10'0" extension rods are furnished at prices shown in parts section with the device at the time of order.
MUST specify door height on order line.
Sex Bolts:
Optional Sex Bolts are recommended for center case when device is used with hollow core or composite doors.
See chart below for quantities and list prices.
Application
Device
Sex Bolt 425
(Optional)
Device
Sex Bolt 325
(Optional) List Add
Hollow core or composite doors - EO (exit only device) 2 2 48
Hollow core or composite doors - Device with Trim 2 Not Required 24
223
Prices subject to change without notice
24 Series
Architectural /
Heavy Duty
PushpadsEXITS
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Device Series F-24-CWDC
3' Devices are priced with standard trim and strikes, 4' add $19 list, 2' add $123 list.
Cylinders are not included in the price.
FIRE EXIT HARDWARE
Wood Door Concealed Vertical Rod Devices
(Includes Strikes 4188 and 2130)
Trim/Control US28 US32D 313AN
US19*
US26D US26 US32 US10 US4
US3
643E*
US15*
* F-24-CWDC-EO 2062 2529 2178 2479 2573 2620 2573 2620 2760
Delta Trim (handed and eld reversible)
F-24-CWDC-DT 717DT 2241 2785 2397 2735 2829 2876 2752 2799 3016
F-24-CWDC-DT 718DT 2407 2805 2375 2755 2849 2896 2918 2965 3036
* F-24-CWDC-NL 718NL* 2241 2785 2397 2735 2829 2876 2752 2799 3016
* F-24-CWDC-C 718C* 2201 2726 2357 2676 2770 2817 2712 2759 2957
Knob Control (handed and eld reversible)
F-24-CWDC-K 711K 2229 2835 2421 2785 2879 2926 2740 2787 3066
F-24-CWDC-K-BE 711K-BE 2229 2835 2421 2785 2879 2926 2740 2787 3066
F-24-CWDC-K-NL 711K-NL 2229 2835 2421 2785 2879 2926 2740 2787 3066
Dane Lever Control (handed and eld reversible)
* F-24-CWDC-L 712L* 2398 2906 2530 2856 2950 2997 2909 2956 3137
* F-24-CWDC-L-BE 712L-BE* 2398 2906 2530 2856 2950 2997 2909 2956 3137
* F-24-CWDC-L-NL 712L-NL* 2398 2906 2530 2856 2950 2997 2909 2956 3137
* F-24-CWDC-L-DT 712L-DT* 2398 2906 2530 2856 2950 2997 2909 2956 3137
* These devices and 712L, 712L-BE, 712L-NL, 712L-DT, 718C, 718NL trims are available in 643E, US15 and US19 nishes.
REFERENCE NOTES:
24 Series ordered in 313AN will be supplied with trims in SP313.
Handing: All F-24-CWDC Devices and Trims are handed and eld reversible. The Device and Trims are furnished RHR when handing is not specied.
Extension Rods: For door heights over 7'0" up to 8'0", 12" extension rods are furnished at no additional charge at the time of device order.
For door heights over 8'0" up to 10'0" extension rods are furnished at prices shown in parts section with the device at the time of order.
MUST specify door height on order line.
Sex Bolts:
Sex Bolts are supplied for center case mounting when device is used with hollow core or composite doors. See chart below for quantities.
Application
Device
Sex Bolt 425
(Supplied)
Device
Sex Bolt 325
(Supplied)
Hollow core or composite doors - EO (exit only device) 2 2
Hollow core or composite doors - Device x Trim 2 Not Required
224
Prices subject to change without notice
24 Series Architectural /
Heavy Duty Pushpads EXITS
Price Book 7
Effective May 4, 2019 • Rev. 05/19
24 Device Options
Cylinder Dogging
Not for use with Fire Exit Hardware
Prex List Add
CD Cylinder Dogging available on all 24 series Panic Devices. 62
LD Less Dogging available on all 24 series Panic Devices. N/C
Less Bottom Rod
Sufx List Add
LBR Less Bottom Rod available with UL Fire Label at no additional charge on F-24-V and F-24-C devices.
Fire rated LBR devices must be ordered in pairs of Vertical Rod Devices.
For Fire Rated Devices specify one device LBR and second device LBR-AFL.
Second device provided with a Fire Pin.
N/C
Electric Latch Retraction
Prex List Add
EL Electric Latch Retraction - Available on all 24 series Panic and Fire Devices.
Electrical Latch cannot be used in combination with CD, EA or KOR options.
766
MEL Motorized Electric Latch Retraction - Available on all 24 series Panic and Fire Devices. Motorized Electric Latch
Retraction cannot be used in combination with AX, HD, CD, EA, or KOR options.
725
REFERENCE NOTE:
PS914 is required for EL operation. See Power Supply section for more detail.
Device Monitoring
Prex List Add
RX Touch Bar Request to Exit Switch available on all 24 series devices.
RX device monitoring switch can be used in combination with a second DM or LM switch (except for 24-R panic and re).
201
KOR Key Override - Override device monitoring on a door by use of a keyed cylinder.
KOR must be used in combination with a device monitoring switch.
56
Exit Alarm
Prex List Add
EA Exit Alarm available on 24-R and 24-V Panic and Fire Devices.
Price includes switch - "RX" is standard, "DC" is optional at no charge.
To order "Less Switch", Deduct $201 list.
498
Allegion Connect
Sufx List Add
CON Cross-category solution using common interconnect components for electried options.
Available with EL, RX, DM, LM, EA, RX-DM, RX-LM, EL-RX, EL-DM, EL-LM options.
N/C
NOTE: For wire harness options refer to Power Supply and Electronic Component Section.
225
Prices subject to change without notice
24 Series
Architectural /
Heavy Duty
PushpadsEXITS
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Series Trim 24
Athena Trim
Model No. Device Type Description
US4,
US10, SP28 SP313 US15
US3, US26
US26D
715DT R, V Dummy Trim 123 227 -227
Control Trim
Model No. Device Type Description
US4,
US10, SP28 SP313
US3, US15,
US26, US26D,
711K R, V Knob, Key Locks or Unlocks 167 243 306
711K C Knob, Key Locks or Unlocks 167 243 306
711K-BE R, V Knob, Blank Escutcheon 167 243 306
711K-BE C Knob, Blank Escutcheon 167 243 306
711K-NL R, V Knob, Night Latch 167 243 306
711K-NL C Knob, Night Latch 167 243 306
711 series trim are handed and eld reversible. Trims are furnished RHR when handing is not specied.
Delta Controls
Model No. Device Type Description
US4,
US10, SP28 SP313
US3, US15,
US19, US26,
US26D
717DT R, V Dummy Trim 179 219 256
717DT C Dummy Trim 179 219 256
717 series trim are handed and eld reversible. Trims are furnished RHR when handing is not specied.
Delta Controls
Model No. Device Type Description
US4,
US10, SP28 SP313
US3, 643E*
US15, US19*,
US26 US26D
718DT C Dummy Trim 345 197 276
718NL* R, V Night Latch 179 219 256
718NL* C Night Latch 179 219 256
718C* R, V Night Latch Less Pull 139 179 197
718C* C Night Latch Less Pull 139 179 197
* Available in 643E and US19.
718 series trim are handed and eld reversible. Trims are furnished RHR when handing is not specied.
Control Lever Trims
Model No. Device Type Description
US4,
US10, SP28 SP313
US3, 643E*
US15, US19*,
US26 US26D
712 L* R, V Dane Lever, Key Locks or Unlocks 336 352 377
712 L* C Dane Lever, Key Locks or Unlocks 336 352 377
712L-BE* R, V Dane Lever, Blank Escutcheon 336 352 377
712L-BE* C Dane Lever, Blank Escutcheon 336 352 377
712L-NL* R, V Dane Lever, Night Latch 336 352 377
712L-NL* C Dane Lever, Night Latch 336 352 377
712L-DT* R, V Dane Lever, Dummy Trim 336 352 377
712L-DT* C Dane Lever, Dummy Trim 336 352 377
* Available in 643E and US19.
712 series trim are handed and eld reversible. Trims are furnished RHR when handing is not specied.
The Dane Lever is furnished standard. Optional lever designs Sutro, Quantum and Avalon are available at no additional charge.
24 Series ordered in US32D will be supplied with trims in US15.
Cylinders are not included in price unless noted.
226
Prices subject to change without notice
24 Series Architectural /
Heavy Duty Pushpads EXITS
Price Book 7
Effective May 4, 2019 • Rev. 05/19
24 Device Strikes
Rim Strikes
Model Description Unnished US19 US26D US32D US4 US10 SP313 US10B US3 US26 US32
264 24/25-R Panic Devices - Opt. – 101 117 – –––––––
299 24/25-R Panic Devices - Std. – 61 73 –73 –73 - 95 95 –
299F 24/25-R Fire Devices - Std. – 77 – 102 119 119 – 119 137 –137
1439 24/25-R Panic Devices - Opt. – 147 – – –––––––
1606 24/25-R Panic Devices - Opt. 73 - – – –––––––
1609-D24 24-R Panic Devices - Opt. – 101 – – – – – – – – –
Must be used with a Coordinator. Not a UL re exit hardware listed application.
Vertical Rod Top Strikes
Model Description Unnished
3788 19/24/25/XX-V Panic and Fire Devices 52
4188 24/25/XX-C,CWDC Panic and Fire Devices 52
Vertical Rod Bottom Strikes
Model Description Unnished
2130 19-V/24/25/XX-V,C Panic or Fire - Std. 52
4155 19-V/24/25/XX-V,C Panic 52
REFERENCE NOTES:
Refer to device catalogs for specic door application strike requirements.
227
Prices subject to change without notice
24 Series
Architectural /
Heavy Duty
PushpadsEXITS
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Device Accessories 24
Cover Plates & Filler Plates
Model No. Description Unnished
3722 Strike cover - ASA 4-7/8" 11
3723 Mortise front - 8" x 1-1/4" 11
3721 Lock front - 2-1/4" x 1-1/8" 11
Cylinders
Model No. Description US26D
US3, US4, US10, US10B
US32, US32D
985 1-1/8" Mortise Cylinder with Straight Cam #24 61 63
986 1-1/4" Mortise Cylinder with Straight Cam #24 61 63
951 Rim Cylinder 61 63
C987 1-3/8" Interchangeable Core Mortise Cylinder Housing 38 40
C953 Interchangeable Core Rim Cylinder Housing 40 42
REFERENCE NOTES:
Interchangeable Core Cylinder Housing uses #5 cam.
Custom Keying not available. Falcon G - default keyway.
Cylinder type needed is determined by trim function.
IC Cylinder Housings sold LESS SFIC
Cylinder Dogging Kits
Model No. Description Part No.
US3, US4, US10, US26, US26D,
US28, US32D, 313AN
24CDK-3 24 Series - 3' device 650155 62
24CDK-4 24 Series - 4' device 650156 62
REFERENCE NOTES:
Cylinder Sold Separately.
When a device is ordered "with CD with Cylinder" a 1-1/4" mortise cylinder (986 Falcon G x straight cam KD) is supplied for CD.
CD Kits can also pair with a 1-1/8" mortise cylinder (985 Falcon G x straight cam KD). Must be ordered separately.
228
Prices subject to change without notice
24 Series Architectural /
Heavy Duty Pushpads EXITS
Price Book 7
Effective May 4, 2019 • Rev. 05/19
24 Device Accessories
Dummy Touch Bars
3´ Device pricing below, 4´ add $19 list.
SP28
SP313
US4
US10 US32D
US3, US32,
US15, US19,
643e, US26,
US26DModel No. Description
250DT 24/25 Series Dummy Touch Bar 331 367 417 476
Model No. Description Part #
US3, US4, US10, US26,
US26D, US32D, SP28, SP313
ELK-3 24/25 Electric Latch Retraction Kit 3' 650147 766
ELK-4 24/25 Electric Latch Retraction Kit 4' 650148 766
Model No. Description Part #
Part Number
w/ Allegion Connect (-CON)
US3, US4, US10, US26, US26D,
US28, US32D, 313AN
24-MELK-3 24 Motorized Electric Latch Retraction Kit 3' 47266632 47270548 725
24-MELK-4 24 Motorized Electric Latch Retraction Kit 4' 47266633 47270549 725
Model No. Description Part # Unnished
24/25 RX KIT 24/25 Series RX Switch Kit 650359 248
Extension Rods
Part No. Description All Finishes
650006 24/25/19/XX-V Extension Rod 12" (ER12-V) 21
650007 24/25/19/XX-V Extension Rod 24" (ER24-V) 37
650008 24/25/19/XX-V Extension Rod 36" (ER36-V) 60
650017 24/25/XX-C, CWDC Extension Rod 12" (ER12-C) 21
650018 24/25/XX-C, CWDC Extension Rod 24" (ER24-C) 37
650019 24/25/XX-C, CWDC Extension Rod 36” (ER36-C) 60
REFERENCE NOTES:
1) Surface Vertical and Concealed Vertical Rod Devices for door heights over 7'0" up to 8'0", 12" extension rods are furnished at no additional charge at the
time of device order. Must specify door height on order line.
2) For door heights over 8'0" up to 10'0" extension rods are furnished at prices shown above with the device at the time of order. MUST specify door height
on order line.
3) Replacement extension rods can be ordered individually by the part numbers listed above.
Electric and Alarm Kits
Model No. Description Part #
US3, US4, US10, US26, US26D,
US28, US32D, 313AN
24-EAK-3 24 Series Exit Alarm Kit 3' 650163 498
24-EAK-4 24 Series Exit Alarm Kit 4' 650164 498
Optional Features:
Prex List Add
RX Touchbar Request to Exit Switch - For D250 only 201
KOR Key Override device monitoring on a door by use of a keyed cylinder - For D250 only 56
229
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Prices subject to change without notice
24 Series
Architectural /
Heavy Duty
PushpadsEXITS
Device Series - Parts 24
Shim Kits
Model No. Description Part # US19
SK24-R 24 Rim Shim Kit - 1/4" 650109 66
SK24-V-8 24 Surface Vertical Shim Kit - 1/4" - over 7' up to 8' doors 650110 66
SK24-V-10 24 Surface Vertical Shim Kit - 1/4" - over 8' up to 10' doors 650208 66
REFERENCE NOTES:
All shim kits for use on door thicknesses up to 2". Consult factory for door thickness over 2"
SLM Blocking
For use with devices on doors with special high density blocking material.
Blocking material must be UL or Warnock Hersey approved.
Model No. Description Part # Unnished
F-24-R/C F-24 Rim/Concealed Vertical SLM Blocking Kit 600333 18
F-24-V F-24 Surface Vertical SLM Blocking Kit 600334 20
230
Prices subject to change without notice
24 Series Architectural /
Heavy Duty Pushpads EXITS
Price Book 7
Effective May 4, 2019 • Rev. 05/19
24 Device Series - Parts
(F) 24 Exit Devices
Unnished US28 US32D 313AN US26D
US10
US26
US32 US4 US3Part No. Description
650234 (F)24-R Center Case Kit 606.00 – – – – – – –
650236 (F) 24-V Center Case Kit 252.00 – – – – – – –
650238 (F) 24-C Center Case Kit RHR 243.00 –––––––
090978-00 (F) 24-C Center Case Kit LHR 243.00 –––––––
650247 24-R Center Case Cover Kit – 123.00 153.00 132.00 151.00 157.00 162.00 169.00
650249 F-24-R Center Case Cover Kit – 123.00 153.00 132.00 151.00 157.00 162.00 169.00
650251 (F) 24-V Center Case Cover Kit – 123.00 153.00 132.00 151.00 157.00 162.00 169.00
650253 (F) 24-C Center Case Cover Kit – 123.00 153.00 132.00 151.00 157.00 162.00 169.00
600307 24 Series Center Case Cover Mtg Pkg – – – 11.00 11.00 11.00 11.00
661408 24 Series Channel 3' Door – 82.00 101.00 87.00 97.00 101.00 104.00 112.00
661409 24 Series Channel 4' Door – 102.00 130.00 107.00 129.00 132.00 134.00 138.00
650121 F-24 Series Channel Cover 3' – 39.00 39.00 39.00 39.00 39.00 39.00 39.00
650122 F-24 series Channel Cover 4' – 44.00 44.00 44.00 44.00 44.00 44.00 44.00
650116 24 Series CD Channel Cover 4' – 55.00 55.00 55.00 55.00 55.00 55.00 55.00
650117 24 Series CD Channel Cover 3' – 49.00 49.00 49.00 49.00 49.00 49.00 49.00
650131 24 Series EA Channel Cover 3' – 74.00 74.00 74.00 74.00 74.00 74.00 74.00
650132 24 Series EA Channel Cover 4' – 84.00 84.00 84.00 84.00 84.00 84.00 84.00
650139 24 Series KOR Channel Cover 3' – 62.00 62.00 62.00 62.00 62.00 62.00 62.00
650140 24 Series KOR Channel Cover 4' – 66.00 66.00 66.00 66.00 66.00 66.00 66.00
650187 24 Series Hex Dogging Kit 3' – 65.00 65.00 65.00 65.00 65.00 65.00 65.00
650188 24 Series Hex Dogging Kit 4' – 69.00 69.00 69.00 69.00 69.00 69.00 69.00
610480 24 Panic Dogging Housing 18.00 –––––––
060109 24 Hex Dogging Key 7/32" (Pkg of 10) 13.00 – – – – – – –
650294 24 Channel End Cap Kit 1-3/4" Door – 31.00 38.00 35.00 37.00 39.00 39.00 41.00
650348 24 Channel End Cap Kit 2-1/4" Door – 31.00 38.00 35.00 37.00 39.00 39.00 41.00
600305 24 Series Channel Screw Pkg 15.00 – – – – – – –
600310 24 Series Push Bar End Cap Kit – 35.00 40.00 36.00 39.00 40.00 41.00 45.00
600319 24 Series Push Bar Guide Pkg 11.00 – – – – – – –
650324 (F) 24-R Mounting Pkg 1-3/4" Door 30.00 –––––––
650302 (F) 24-R Mounting Pkg 2-1/4" Door 29.00 –––––––
650304 24-V Mounting Pkg 1-3/4" - 2-1/4" Door 44.00 – – – – – – –
650325 F-24-V Mounting Pkg 1-3/4" Door 44.00 – – – – – – –
650201 F-24-V Mounting Pkg 2-1/4" Door 44.00 – – – – – – –
650318 24-C Mounting Pkg 1-3/4" Door 30.00 –––––––
650300 24-C Mounting Pkg 2-1/4" Door 30.00 –––––––
650317 F-24-C Mounting Pkg 1-3/4" Door 30.00 –––––––
650346 F-24-C Mounting Pkg 2-1/4" Door 30.00 –––––––
650326 24-CWDC Mounting Pkg 1-3/4" Door – – 63.00 63.00 – – 63.00 –
650298 24-CWDC Mounting Pkg 2-1/4" Door – – 63.00 63.00 – – 63.00 –
650327 F-24-CWDC Mounting Pkg 1-3/4" Door 63.00 –––––––
060111 Cotter Key 1/8" x 1" (Package of 10) 13.00 – – – – – – –
600320 EL Solenoid Pkg 181.00 – – – – – – –
600321 EL Plunger Solenoid Pkg 68.00 –––––––
650359 24/25 Series RX Switch Kit 248.00 –––––––
050534 EL Potted Circuit Breaker 305 - - - - - - -
650265 Exit Alarm Label - Service 10 - - - - - - -
231
Prices subject to change without notice
24 Series
Architectural /
Heavy Duty
PushpadsEXITS
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Device Series - Parts 24
(F) 24 Exit Devices - Latches and Rods
Unnished SP28 US32D 313AN US26D
US10
US26
US32Part No. Description
650389 24-V Top Latch Case 117.00 – – – – –
650375 F-24-V Top Latch Case 121.00 – – – – –
650202 24-V Latch Case Cover Kit – 68.00 68.00 88.00 88.00 88.00
650336 24-V Latch Case Cover Mounting Pkg – 4.00 4.00 4.00 4.00 4.00
650311 24-V Rod Guide Kit – 52.00 55.00 – 66.00 49.00
650387 24-V Bottom Bolt Guide (Latch cover sold separately) 10.00 –––––
4450 24-V Top Rod Kit – 88.00 88.00 88.00 88.00 88.00
610056 24-V Bottom Rod Kit – 119.00 119.00 119.00 119.00 119.00
– –––––
603 24-C, C-WDC Top Latch Case 202.00 – – – – –
F603 F-24-C Top Latch Case 280.00 – – – – –
WF603 F-24-CWDC Top Latch Case 280.00 – – – – –
650339 (F) 24-C, CWDC Top Latch Release Kit – 39.00 39.00 35.00 35.00 35.00
– –––––
4567 24-C Bottom Bolt Guide 48.00 –––––
4835 24-CWDC Bottom Bolt Guide 44.00 – – – – –
4694 F-24-CWDC Latch Bracket 10.00 –––––
650351 (F) 24-C, CWDC Center Slide Assy 291.00 – – – – –
4833 24-CWDC Reinforcement Plate – 32.00 32.00 43.00 43.00 43.00
4834 24-CWDC Reinforcement Plate w/ Access Hole – 32.00 32.00 43.00 43.00 43.00
610061 (F) 24-C, CWDC Top Rod Kit 88.00 –––––
610057 (F) 24-C, CWDC Bottom Rod Kit 119.00 – – – – –
5494 F-24-C Auxiliary Fire Pin Kit (LBR application only) 151.00 – – – – –
660002 #10 x 1 1/4" FPHSMS Clear Zinc 2.00 - - - - -
232
Prices subject to change without notice
24 Series Architectural /
Heavy Duty Pushpads EXITS
Price Book 7
Effective May 4, 2019 • Rev. 05/19
24 Trim Series - Parts
24 Series Trim
Part No. Description Unnished
SP28
SP313
US26D
US32D
US10
US26
US4
US32 US3
4120 710NL, 718C/NL Cylinder Spacer Collar 7.00 –––––
4121 710NL, 718C/NL Cylinder Anchor Plate 7.00 –––––
661560 700/900 Locking Plate 18.00 –––––
4270 700 Series Trim Hex Stud 4.00 – – – – –
4349 Control Hex Stud 5.00 – – – – –
650314 700/900 Lever Actuator Spring 18.00 –––––
600288 717/718/719 Pull Grip Screw Pkg 4.00 – – – – –
650366 TP/K/L Actuator Shaft Assembly 30.00 –––––
650313 710TP Retainer Plate 36.00 –––––
650312 711/712-R/V Retainer Plate 41.00 – – – – –
060136 700/900 Output Cam Pkg 2-1/4" Dr 41.00 – – – – –
060137 700/900 Output Cam Pkg 1-3/4" Dr 28.00 –––––
650151 715DT Mtg Pkg 1-3/4" – 12.00 12.00 12.00 12.00 12.00
650152 715DT Mtg Pkg 2-1/4" – 12.00 12.00 12.00 12.00 12.00
650153 717DT Mtg Pkg 1-3/4" – 7.00 7.00 7.00 7.00 7.00
650154 717DT Mtg Pkg 2-1/4" – 7.00 7.00 7.00 7.00 7.00
650157 710DT Mtg Pkg 1-3/4" – 7.00 7.00 7.00 7.00 7.00
650158 710DT Mtg Pkg 2-1/4" – 7.00 7.00 7.00 7.00 7.00
650161 710NL Mtg Pkg 1-3/4" – 22.00 22.00 22.00 22.00 22.00
650162 710NL Mtg Pkg 2-1/4" – 22.00 22.00 22.00 22.00 22.00
650165 710TP Mtg Pkg 1-3/4" – 12.00 12.00 12.00 12.00 12.00
650166 710TP Mtg Pkg 2-1/4" – 12.00 12.00 12.00 12.00 12.00
650169 718C/NL-R/V Mtg Pkg 1-3/4" – 12.00 12.00 12.00 12.00 12.00
650170 718C/NL-R/V Mtg Pkg 2-1/4" – 12.00 12.00 12.00 12.00 12.00
650173 718NL-C Mtg Pkg 1-3/4" – 30.00 30.00 30.00 30.00 30.00
650174 718NL-C Mtg Pkg 2-1/4" – 30.00 30.00 30.00 30.00 30.00
650177 718C-CV Mtg Pkg 1-3/4" – 30.00 30.00 30.00 30.00 30.00
650178 718C-CV Mtg Pkg 2-1/4" – 30.00 30.00 30.00 30.00 30.00
650181 718DT Mtg Pkg 1-3/4" – 7.00 7.00 7.00 7.00 7.00
650182 718DT Mtg Pkg 2-1/4" – 7.00 7.00 7.00 7.00 7.00
650185 718TP Mtg Pkg 1-3/4" – 7.00 7.00 7.00 7.00 7.00
650186 718TP Mtg Pkg 2-1/4" – 7.00 7.00 7.00 7.00 7.00
650189 711/712/719 Mtg Pkg 1-3/4" 7.00 –––––
650190 711/712/719 Mtg Pkg 2-1/4" 7.00 –––––
650327 F-24 CWDC SERV Mtg Pkg 63.00 –––––
600339 700/900 NL Spring Pkg 6.00 –––––
600283 Shear Pin, package of 5 10.00 –––––
24 Series Trim
Part No. Description Unnished SP28 SP313
US26D
US32D
US10
US26
US4
US32 US3
600298 Knob Assy - 136.00 145.00 169.00 174.00 178.00 187.00
600299 Dane Lever Kit - 101.00 106.00 129.00 131.00 133.00 138.00
600300 Sutro Lever Kit - 101.00 106.00 129.00 131.00 133.00 138.00
600301 Quantum Lever Kit - 101.00 106.00 129.00 131.00 133.00 138.00
600337 Avalon Lever Kit - 162.00 164.00 164.00 224.00 164.00 224.00
233
Prices subject to change without notice
24 Series
Architectural /
Heavy Duty
PushpadsEXITS
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Parts Maintenance Kit 24
Part No. Description List Price
650277 24/25 Maintenance Kit (See below for what is supplied in Kit) 1,807.00
Rell Parts/Packages
Part No. Description
Rell
List Price Each
Kit
Contents Qty
299 Strike 299 Strike US19 61.00 5
325 SNB 325 Sex Bolt, 1/4-20 US32D (Pkg of 2) 24.00 10
425 SNB 425 Sex Bolt, 10-24 US32D (Pkg of 2) 24.00 10
4208 CD/EA/KOR Cylinder Retaining Bracket 7.00 30
060126 512/718 Lever Washer (Pkg of 10) 6.00 1
3894-000 Cylinder Nut BRS 4.00 10
650311 Rod Guide Kit US32D 55.00 6
650311 Rod Guide Kit SP28 52.00 2
650311 Rod Guide Kit SP313 55.00 2
060109 Hex Dogging Key 7/32" (Pkg of 10) 13.00 1
650231 512 Mtg Pkg US4 1-3/4" Dr 9.00 2
650231 512 Mtg Pkg US10B 1-3/4" Dr 5.00 2
650231 512 Mtg Pkg US26D 1-3/4" Dr 5.00 6
650294 24/25 End Cap Kit US32D 1-3/4" Dr. 38.00 6
650294 24/25 End Cap Kit US26D 1-3/4" Dr. 37.00 2
650294 24/25 End Cap Kit SP28 1-3/4" Dr. 31.00 1
650294 24/25 End Cap Kit SP313 1-3/4" Dr. 35.00 1
600283 511 Trim Shear Pin (Pkg of 5) 10.00 6
640001 24 Device Plastic Mounting Template 4.00 2
640002 25 Device Plastic Mounting Template 4.00 2
650267 510/513 Trim Shear Pin (Pkg of 10) 24.00 3
060112 8500 Lock Housing Screws (Pkg of 10) 6.00 2
060113 24/25-C Latch Screw (Pkg of 10) 6.00 5
060114 Rod Guide Screws (Pkg of 10) 6.00 3
060119 510/511/512/513 Back Plate Screws (Pkg of 10) 6.00 5
600309 25 Lift Finger Screws (Pkg of 2) 10.00 10
600173 8500 Lock Face Screws US3/US4/US10 4.00 10
600173 8500 Lock Face Screws US26D/US32D 4.00 10
600173 8500 Lock Face Screws US10B 4.00 10
060120 8500 Lock Backplate Screws (Pkg of 10) 6.00 5
060121 24/25-V Latch Cover Screws US26D/US32D/US28 (Pkg of 10) 6.00 5
060121 24/25-V Latch Cover Screws US3/US4/US10 (Pkg of 10) 6.00 5
060121 24/25-V Latch Cover Screws US10B (Pkg of 10) 6.00 5
060123 Electric Option Dogging Screw (Pkg of 10) 6.00 5
060122 K-NL/L-NL Spindle Cam Screw (Pkg of 10) 11.00 2
060124 K/L/TL Trim Lock Nut (Pkg of 10) 6.00 1
600305 24/25 Channel Screw (Pkg of 10) 15.00 3
060111 Cotter Key 1/8" x 1" (Pkg of 10) 13.00 5
600279 Cylinder Nut Tool (Pkg of 5) 20.00 2
060125 FSE/FSE Trim Pivot Pin (Pkg of 10) 6.00 2
600319 24/25 Pushbar Guide (Pkg of 2) 11.00 10
600278 25 Trim Cylinder Locknut 11.00 10
060117 25 Center Case Mtg Screws (Pkg of 10) 6.00 5
060118 24 Center Case Housing Screws (Pkg of 10) 6.00 5
060116 25-R/M Device Mounting Screws (Pkg of 10) 7.00 5
060115 FSA/FSE Trim Screws (Pkg of 10) 6.00 5
600307 24/25 Center Case Cover Screws US3 (Pkg of 4) 11.00 12
600307 24/25 Center Case Cover Screws US4 (Pkg of 4) 11.00 12
600307 24/25 Center Case Cover Screws US10 (Pkg of 4) 11.00 12
600307 24/25 Center Case Cover Screws US10B (Pkg of 4) 11.00 12
600307 24/25 Center Case Cover Screws US26D/US32D/SP28 (Pkg of 4) 11.00 12
600277 510/513 Spindle Cam Ret. Ring (Pkg of 10) 10.00 2
600308 25 Housing Plate Screws (Pkg of 2) 10.00 2
970321 299 Strike Shim 12.00 20
Price Book 7
Effective May 4, 2019 • Rev. 05/19
234
Prices subject to change without notice
24 Series Architectural /
Heavy Duty Pushpads EXITS
(F)24 Rim exit device
Panic and fire
1
4
9
36
8
5
17
6
Fire
or
Panic
Fire Device Only
Panic Device Only
25
6
36
73
13
3
7
7
235
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Prices subject to change without notice
24 Series
Architectural /
Heavy Duty
PushpadsEXITS
Rim exit device (F)24
No. Qty. Part no. Description Package contents Notes
1 1 650294 24 Channel Endcap Kit 1C\v" Door 1– Channel Endcap A
2– #10-24 x C\," PPHMS
1– Channel Endcap Bracket
2– #10-24 x 1" PPHMS
2– #10 x 1Z\v" PPHSMS
650348 24 Channel Endcap Kit 2Z\v" Door 1– Channel Endcap A
2– #10-24 x C\," PPHMS
1– Channel Endcap Bracket
2– #10-24 x 1" PPHMS
2– #10 x 1Z\v" PPHSMS
3 1 661408 24 Channel 3' A
661409 24 Channel 4'
4 1 600305 24 Channel Screw Pkg 10– #10-16 x Z\x" Hex Washer Head Taptite
5 1 650121 F-24 Channel Cover 3' A, B
650122 F-24 Channel Cover 4'
6 1 600319 24 Pushbar Guide Pkg 2– Pushbar Guide
7 1 600310 24 Pushbar Endcap Kit 2– Pushbar Endcap A
4– #8-18 x C\v" FPHSMS
8 1 600307 Center Case Cover Screw Pkg 4– #8-18 x C\," UFPHSMS A
9 1 299 299 Strike C
13 1 650187 24 Hex Dogging Kit 3' 1– Panic Channel Cover
1– Dogging Subassembly
1– #8-32 x C\," UFPHMS
A, B
650188 24 Hex Dogging Kit 4'
17 1 060109 24 Panic Hex Dogging Key M\cx" package of 10
25 1 650234 (F)24-R Center Case Kit 2– #10-16 x Z\x" Hex Washer Head Taptite
36 1 650324 (F)24-R Mounting Pkg 1C\v" Door 2– #10 x 1Z\v" PPHSMS *
2– #14 x 1" PPHSMS *
2– 1/4 - 20 x C\v" PPHMS
2– 10-24 x 1Z\x" PPHMS
1– Dogging Key
1 650302 (F)24-R Mounting Pkg 2Z\v" Door 2– #10 x 1Z\v" PPHSMS *
2– #14 x 1" PPHSMS *
2– 1/4 - 20 x 1Z\v" PPHMS *
2– #10-24 x 2" PPHMS *
73 1 650247 24-R Center Case Cover Kit 1– Center Case Cover A
650249 F-24-R Center Case Cover Kit 4– #8-18 x C\," UFPHSMS
* Item(s) not shown
A Specify by nish: US3, US4, US10, 313AN, US26, US32, US26D, US32D, US28
B Specify by nish: US3, US4, US10, US19, US26, US26D, SP313
Price Book 7
Effective May 4, 2019 • Rev. 05/19
236
Prices subject to change without notice
24 Series Architectural /
Heavy Duty Pushpads EXITS
(F)24-V Surface vertical rod exit device
Panic and fire
1
4
37
74
8
5
17
6
Fire
or
Panic
Fire Device Only
Panic Device Only
57
6
3
37 13
7
7
237
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Prices subject to change without notice
24 Series
Architectural /
Heavy Duty
PushpadsEXITS
Surface vertical rod exit device (F)24-V
No. Qty. Part no. Description Package contents Notes
1 1 650294 24 Channel Endcap Kit 1C\v" Door 1– Channel Endcap A
2– #10-24 x C\," PPHMS
1– Channel Endcap Bracket
2– #10-24 x 1" PPHMS
2– #10 x 1Z\v" PPHSMS
1 650348 24 Channel Endcap Kit 2Z\v" Door 1– Channel Endcap A
2– #10-24 x C\," PPHMS
1– Channel Endcap Bracket
2– #10-24 x 1" PPHMS
2– #10 x 1Z\v" PPHSMS
3 1 661408 24 Channel 3' A
661409 24 Channel 4'
4 1 600305 24 Channel Screw Pkg 10– #10-16 x Z\x" Hex Washer Head Taptite
5 1 650121 F-24 Channel Cover 3' A, B
650122 F-24 Channel Cover 4'
6 1 600319 24 Pushbar Guide Pkg 2– Pushbar Guide
7 1 600310 24 Pushbar Endcap Kit 2– Pushbar Endcap A
4– #8-18 x C\v" FPHSMS
8 1 600307 Center Case Cover Screw Pkg 4– #8-18 x C\,” UFPHSMS A
13 1 650187 24 Hex Dogging Kit 3' 1– Panic Channel Cover
1– Dogging Subassembly
1– #8-32 x C\,” UFPHMS
A, B
650188 24 Hex Dogging Kit 4'
17 1 060109 24 Panic Hex Dogging Key M\cx" package of 10
37 1 650304 24-V Mounting Pkg 1C\v" - 2Z\v" Door 4– #10 x 1Z\v" PPHSMS *
2– #10 x 1Z\v" FPHSMS *
2– #14 x 1" PPHSMS *
1– Z\, x 1" Cotter Key *
1– Dogging Key
650325 F-24-V Mounting Pkg 1C\v" Door 2– #10-24 x C\v" PPHMS *
4– #10-24 x C\v" FPHMS *
2– 1/4-20 x C\v" PPHMS
1– Z\, x 1" Cotter Key *
650201 F-24-V Mounting Pkg 2Z\v" Door 2– #10-24 x 1Z\v" PPHMS *
4– #10-24 x 1Z\v" FPHMS *
2– 1/4-20 x 1Z\v" PPHMS *
1– Z\," x 1" Cotter Key *
57 1 650236 (F)24-V Center Case Kit 1– Center Case A
2– #10-16 x Z\x" Hex Washer Head Taptite
74 1 650251 (F)24-V Center Case Cover Kit 1– Center Case Cover A
4– #8-18 x C\,” UFPHSMS
* Item(s) not shown
A Specify by nish: US3, US4, US10, 313AN, US26, US32, US26D, US32D, US28
Price Book 7
Effective May 4, 2019 • Rev. 05/19
238
Prices subject to change without notice
24 Series Architectural /
Heavy Duty Pushpads EXITS
(F)24-C Concealed vertical rod exit device
1
4
34
75
8
5
17
6
Fire
or
Panic
Fire Device Only
Panic Device Only
58
6
3
13
7
7
Panic and fire
239
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Prices subject to change without notice
24 Series
Architectural /
Heavy Duty
PushpadsEXITS
Concealed vertical rod exit device (F)24-C
No. Qty. Part no. Description Package contents Notes
1 1 650294 24 Channel Endcap Kit 1C\v" Door 1– Channel Endcap A
2– #10-24 x C\," PPHMS
1– Channel Endcap Bracket
2– #10-24 x 1" PPHMS
2– #10 x 1Z\v" PPHSMS
1 650348 24 Channel Endcap Kit 2Z\v" Door 1– Channel Endcap A
2– #10-24 x C\," PPHMS
1– Channel Endcap Bracket
2– #10-24 x 1" PPHMS
2– #10 x 1Z\v" PPHSMS
3 1 661408 24 Channel 3' A
661409 24 Channel 4'
4 1 600305 24 Channel Screw Pkg 10– #10-16 x Z\x" Hex Washer Head Taptite
5 1 650121 F-24 Channel Cover 3' A, B
650122 F-24 Channel Cover 4'
6 1 600319 24 Pushbar Guide Pkg 2– Pushbar Guide
7 1 600310 24 Pushbar Endcap Kit 2– Pushbar Endcap A
4– #8-18 x C\v" FPHSMS
8 1 600307 24 Center Case Cover Screw Pkg 4– #8-18 x C\,” UFPHSMS A
13 1 650187 24 Hex Dogging Kit 3' 1– Panic Channel Cover
1– Dogging Subassembly
1– #8-32 x C\,” UFPHMS
A, B
650188 24 Hex Dogging Kit 4'
17 1 060109 24 Panic Hex Dogging Key M\cx" package of 10
34 Included with C, F-24-C, F-24-CWDC Mounting Packages.
35
58 1 650238 (F)24-C Center Case Kit RHR 1– Center Case
090978 (F) 24-C Center Case Kit LHR 2– #10-16 x Z\x" Hex Washer Head Taptite
75 1 650253 (F)24-C Center Case Cover Kit 1– Center Case A
4– #8-18 x C\,” UFPHSMS
A Specify by nish: US3, US4, US10, 313AN, US26, US32, US26D, US32D, US28
Price Book 7
Effective May 4, 2019 • Rev. 05/19
240
Prices subject to change without notice
24 Series Architectural /
Heavy Duty Pushpads EXITS
(F)24-V Surface vertical rods and latches
Panic and fire
40
43
42
39
42
46
45
44
47
50
37
41
44
39
37
37
33
32
38
241
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Prices subject to change without notice
24 Series
Architectural /
Heavy Duty
PushpadsEXITS
Surface vertical rods and latches (F)24-V
No. Qty. Part no. Description Package contents Notes
32 1 3788 Vertical Rod Top Strike **
33 2 660002 #10 x 1Z\v" FPHSMS
37 1 650304 24-V Mounting Pkg 1C\v" - 2Z\v" Door 2– #10 x 1Z\v" PPHSMS *
4– #10 x 1Z\v" FPHSMS *
2– #14 x 1" PPHSMS *
1– Z\, x 1" Cotter Key
1– Dogging Key *
650325 F-24-V Mounting Pkg 1C\v" Door 2– #10-24 x C\v" PPHMS *
4– #10-24 x C\v" FPHMS
2–1/4-20 x C\v" PPHMS *
1– Z\, x 1" Cotter Key
650201 F-24-V Mounting Pkg 2Z\v" Door 2– #10-24 x 1Z\v" PPHMS *
4– #10-24 x 1Z\v" FPHMS *
2–1/4-20 x 1C\v" PPHMS *
1– Z\," x 1" Cotter Key
39 1 650336 24-V Latch Case Cover Screw Pkg 4– #8-32 x Z\v" UFPHMS
40 1 650389 24-V Top Latch Case - Panic
650375 24-V Top Latch Case - Fire
41 1 060111 Z\," x 1" Cotter Key package of 10
42 2 650202 24-V Latch Case Cover B
43 1 4450 24-V Top Rod Kit B
44 2 650311 24-V Rod Guide Kit C
45 1 610056 24-V Bottom Bolt Kit B
46 1 650387 24-V Bottom Guide Assembly (screws not included)
47 1 650006 Vertical Extension Rod 12" A
650007 Vertical Extension Rod 24"
650008 Vertical Extension Rod 36"
50 1 5494 F-24-C Auxiliary Fire Pin Kit (Less Bottom Rod
applications only)
* Item(s) not shown
** For Flush Transom applications, specify part number 4215-019 angle bracket
A Specify by nish: US3, US4, US10, US10B, US32, US32D, SP28, SP313
B Specify by nish: US3, US4, US10, US26, US26D, US32, US32D, SP28, SP313
C Specify by nish: US3, US4, US10, US26, US32, US32D, SP28, SP313
Price Book 7
Effective May 4, 2019 • Rev. 05/19
242
Prices subject to change without notice
24 Series Architectural /
Heavy Duty Pushpads EXITS
(F)24-C and F-24-C-WDC-90 Concealed vertical rods and latches
No. Qty. Part no. Description Package contents Notes
17 1 060109 24 Panic Hex Dogging Key M\cx" package of 10
34 1 650317 F-24-C Mounting Pkg 1C\v" Door 34a 8– #10-24 x C\v" PPHMS
34b 7– #10-24 x C\v" FPHMS
34c 2– #8-32 x C\," UFPHMS
34d 1– Z\, x 1" Cotter Key
—2– 1/4-20 x C\v" PPHMS *
Metal door—panic and fire, wood door—90 minute fire device
24-C
52
34b
53
34f
F-24-C
F-24-WDC-90
F-24-WDC-90
For panic
devices only
65
48
50
41
34b
62
63
64
60
34b
61
34c
34d
51
17
34e
34a
34n
67
243
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Prices subject to change without notice
24 Series
Architectural /
Heavy Duty
PushpadsEXITS
Concealed vertical rods and latches (F)24-C and F-24-C-WDC-90
No. Qty. Part no. Description Package contents Notes
34 1 650318 24-C Mounting Pkg 1C\v" Door 34a 8– #10 x 1Z\v" PPHSMS
34b 6– #10-24 x C\v" FPHMS
34c 2– #8-32 x C\," UFPHMS
34d 1– Z\, x 1" Cotter Key
34e 1– Dogging Key
— 2– #14 x 1" PPHSMS *
650327 F-24-CWDC 90 Minute Mounting Pkg 1C\v" Door 34a 4– #10 x 1Z\v" PPHSMS
34b 3– #10 x 1Z\v" FPHSMS
34c 2– #8-32 x C\," UFPHMS
34d 1– Z\, x 1" Cotter Key
34f 2– Latch Bracket
—2– 1/4-20 x C\v" PPHMS *
34n 6– #10-24 x C\v" FPHMS
650300 24-C Mounting Pkg 2Z\v" Door 34a 8– #10 x 1Z\v" PPHSMS
34b 6– #10-24 x 1Z\v" FPHMS
34c 2– #8-32 x C\," UFPHMS
34d 1– Z\, x 1" Cotter Key
34e 1– Dogging Key
— 2– #14 x 1" PPHSMS *
650346 F-24-C Mounting Pkg 2Z\v" Door 34a 8– #10-24 x 1Z\v" PPHMS
34b 7– #10-24 x 1Z\v" FPHMS
34c 2– #8-32 x C\," UFPHMS
34d 1– Z\, x 1" Cotter Key
—2– 1/4-20 x 1Z\v" PPHMS *
41 1 060111 Z\, x 1" Cotter Key package of 10
48 1 650017 Concealed Vertical Extension Rod 12"
650018 Concealed Vertical Extension Rod 24"
650019 Concealed Vertical Extension Rod 36"
50 1 5494 F-24-C Auxiliary Fire Pin Kit (Less Bottom Rod application only)
51 1 603L 24-C, C-WDC Top Latch Case - LHR
1 603R 24-C, C-WDCTop Latch Case - RHR
52 1 F603 F-24-C, C-WDC Top Latch Case
53 2 4694 F-24-CWDC Latch Bracket
60 1 4188 Concealed Vertical Top Rod Strike
61 1 650339 (F)24-C, CWDC Top Latch Release Kit A
62 1 610061 (F)24-C, CWDC Top Rod Kit
63 1 650351 (F)24-C, CWDC Center Slide Assembly
64 1 610057 (F)24-C, CWDC Bottom Rod Kit
65 1 4567 24-C Bottom Bolt Guide
67 1 2130 Vertical Rod Bottom Strike
* Item(s) not shown
A Specify by nish: US3, US4, US10, 313AN, US26, US32, US26D, US32D, SP28
Price Book 7
Effective May 4, 2019 • Rev. 05/19
244
Prices subject to change without notice
24 Series Architectural /
Heavy Duty Pushpads EXITS
24-C-WDC and F-24-C-WDC-20 Concealed vertical rods latches
No. Qty. Part no. Description Package contents Notes
17 1 060109 24 Panic Hex Dogging Key M\cx" package of 10
35 1 650326 24-CWDC Mounting Pkg 1C\v" Door 35a 2– Z\v-20 x C\v" PPHMS A
— 4– #10-24 x 1" PPHMS *
35b 11– #10 x 1Z\v" FPHSMS
35c 2– #8-32 x C\," UFPHMS
—2– C\v" CS Plate Mtg Screw *
35d 1– Z\, x 1" Cotter Key
35f 4– Z\v" CS FInish Washer
Wood door—panic devices, wood door—20 minute fire device
66
41
35b
52
62
63
64
61
54
35b
55
56
48
35c
35d
35h
35a
50
17
35k
35n
For panic
devices only
35g
35f
REFERENCE NOTE:
F-24-C-WDC-20 is no longer available for purchase. Parts listed for installed SERVICE ONLY.
245
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Prices subject to change without notice
24 Series
Architectural /
Heavy Duty
PushpadsEXITS
Concealed vertical rods latches 24-C-WDC and F-24-C-WDC-20
No. Qty. Part no. Description Package contents Notes
35 1 650326 24-CWDC Mounting Pkg 1C\v" Door 35g 4– Z\v-20 x C\v" FPHMS A
35h 6– Z\v-20 Sexbolt
35k 1– Dogging Key
35n 2– #10-24 x C\v" FPHMS
—2– #10-24 x C\v" FPHMS *
650327 F-24-CWDC 20 Minute Mounting Pkg 1C\v" Door 35a 2– Z\v-20 x C\v" PPHMS A
35b 11– #10 x 1Z\v" FPHSMS
35c 2– #8-32 x C\," UFPHMS
35d 1– Z\, x 1" Cotter Key
—2– C\v" CS Plate Mtg Screw *
35f 4– Z\v" CS Finish Washer
35g 4– Z\v-20 x C\v" FPHMS
35h 6– Z\v-20 Sexbolt
— 4– #10-24 x 1" PPHMS *
35n 2– #10-24 x C\v" FPHMS
—2– #10-24 x C\v" FPHMS *
650298 24-CWDC Mounting Pkg 2Z\v" Door 35a 2– Z\v-20 x 1Z\v" PPHMS A
— 4– #10-24 x 1" PPHMS *
35b 11– #10 x 1Z\v" FPHSMS
35c 2– #8-32 x C\," UFPHMS
—2– #8-32 x C\," UFPHMS *
35d 1– Z\, x 1" Cotter Key
—2– C\v" CS Plate Mtg Screw *
35f 4– Z\v-20 x 1Z\v" FPHMS
35g 4– Z\v" CS Finish Washer
35h 6– Z\v-20 Sexbolt
35n 2– #10-24 x C\v" FPHMS
41 1 060111 Z\, x 1" Cotter Key package of 10
48 1 650017 Concealed Vertical Extension Rod 12"
650018 Concealed Vertical Extension Rod 24"
650019 Concealed Vertical Extension Rod 36"
49 1 WF603 F-24-C-WDC Top Latch Case *
50 1 5494 F-24-C Auxiliary Fire Pin Kit (Less Bottom Rod
application only)
54 1 4833 Top Reinforcement Plate A
55 1 4834 Top Reinforcement Plate with Access Hole A
56 1 4832 (F)24-CWDC Center Slide Reinforcement Plate
61 1 650339 (F)24-C, CWDC Top Latch Release Kit A
62 1 610061 (F)24-C, CWDC Top Rod Subassembly
63 1 650351 (F)24-C, CWDC Center Slide Assembly
64 1 610057 (F)24-C, CWDC Bottom Rod Kit
66 1 4835 24-CWDC Bottom Bolt Guide
* Item(s) not shown
A Specify by nish: US3, US4, US10, 313AN, US26, US32, US26D, US32D, SP28
246
Prices subject to change without notice
19 Series Commercial /
Medium Duty Pushpads EXITS
Price Book 7
Effective May 4, 2019 • Rev. 05/19
19-R Device Series
EXIT HARDWARE
Trim/Control
SP28
SP313 US32DRim Devices (Includes F570 Strike)
19-R-EO 287 504
Trident Trim (must specify handing)
19-R-DT 920DT 325 542
19-R-NL 920NL 354 571
Centron Trim (non-handed)
19-R-EO 930EO 321 538
19-R-DT 930DT 325 542
19-R-NL 930NL 340 557
19-R-C 930C 334 551
19-R-DT 917DT 317 534
Control Trim (non-handed)
19-R-DT 918DT 398 707
19-R-NL 918NL 398 707
Knob Control (handed and eld reversible)
19-R-K 911K 398 707
19-R-K-BE 911K-BE 398 707
19-R-K-NL 911K-NL 398 707
Dane Lever Control (handed and eld reversible)
19-R-L 912L 441 741
19-R-L-BE 912L-BE 441 741
19-R-L-NL 912L-NL 441 741
19-R-L-DT 912L-DT 441 741
Key in Lever (handed and eld reversible)
19-R-KIL 914-KIL-KD W/CYL 472 689
19-R-KIL-NL 914-KIL-NL-KD W/CYL 472 689
19-R-KIL-BE 914-KIL-BE 472 689
19-R-KIL-IC 914-KIL-IC W/CYL 515 732
REFERENCE NOTE:
930 series trim is available in SP313 and US32D nish only.19 series devices order in SP28 paired with 930 trim are supplied with US32D nish trim.
3´ Devices are priced with standard trim and strikes, 4´ add $19 list.
Cylinders are not included in price unless noted.
Sex Bolts:
Three 4122 Sex Bolts are supplied standard no charge, one for hinge side mounting and two for center case mounting.
247
Prices subject to change without notice
19 Series
Commercial /
Medium Duty
PushpadsEXITS
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Device Series F-19-R
FIRE EXIT HARDWARE
Trim/Control
SP28
SP313 US32DRim Devices (Includes F570 Strike)
F-19-R-EO ―358 588
Trident Trim (must specify handing)
F-19-R-DT 920DT 396 626
F-19-R-NL 920NL 425 655
Centron Trim (non-handed)
F-19-R-EO 930EO 392 622
F-19-R-DT 930DT 396 626
F-19-R-NL 930NL 411 641
F-19-R-C 930C 405 635
F-19-R-DT 917DT 388 618
Control Trim (non-handed)
F-19-R-DT 918DT 469 791
F-19-R-NL 918NL 469 791
Knob Control (handed and eld reversible)
F-19-R-K 911K 469 791
F-19-R-K-BE 911K-BE 469 791
F-19-R-K-NL 911K-NL 469 791
Dane Lever Control (handed and eld reversible)
F-19-R-L 912L 512 825
F-19-R-L-BE 912L-BE 512 825
F-19-R-L-NL 912L-NL 512 825
F-19-R-L-DT 912L-DT 512 825
Key in Lever (handed and eld reversible)
F-19-R-KIL 914-KIL-KD W/CYL 543 773
F-19-R-KIL-NL 914-KIL-NL-KD W/CYL 543 773
F-19-R-KIL-BE 914-KIL-BE 543 773
F-19-R-KIL-IC 914-KIL-IC W/CYL 586 816
REFERENCE NOTE:
930 series trim is available in SP313 and US32D nish only.19 series devices order in SP28 paired with 930 trim are supplied with US32D nish trim.
3' Devices are priced with standard trim and strike, 4' add $19 list.
Cylinders are not included in the price unless noted.
Sex Bolts:
Three 4122 Sex Bolts are supplied standard, one for hinge side mounting and two for center case mounting.
Two 2729 Sex bolts are supplied for additional center case mounting when device is used with wood, composite or non-reinforced hollow metal doors.
Application
Sex Bolt 2729
(Supplied)
Wood, composite or non-reinforced hollow metal doors 2
248
Prices subject to change without notice
19 Series Commercial /
Medium Duty Pushpads EXITS
Price Book 7
Effective May 4, 2019 • Rev. 05/19
19-V Device Series
EXIT HARDWARE
Trim/Control
SP28
SP313 US32D
Surface Vertical Rod Devices
(Includes 3788 and 2130 Strikes )
19-V-EO 444 841
Trident Trim (must specify handing)
19-V-DT 920DT 482 879
19-V-NL 920NL 511 908
Centron Trim (non-handed)
19-V-EO 930EO 478 875
19-V-DT 930DT 482 879
19-V-NL 930NL 497 894
19-V-C 930C 491 888
19-V-DT 917DT 474 871
Control Trim (non-handed)
19-V-DT 918DT 555 1044
19-V-NL 918NL 555 1044
Knob Control (handed and eld reversible)
19-V-K 911K 555 1044
19-V-K-BE 911K-BE 555 1044
19-V-K-NL 911K-NL 555 1044
Dane Lever Control (handed and eld reversible)
19-V-L 912L 598 1078
19-V-L-BE 912L-BE 598 1078
19-V-L-NL 912L-NL 598 1078
19-V-L-DT 912L-DT 598 1078
Key in Lever (handed and eld reversible)
19-V-KIL 914-KIL-KD W/CYL 629 1026
19-V-KIL-NL 914-KIL-NL-KD W/CYL 629 1026
19-V-KIL-BE 914-KIL-BE 629 1026
19-V-KIL-IC 914-KIL-IC W/CYL 672 1069
REFERENCE NOTES:
Handing: 19-V devices are handed and eld reversible. Devices and Trims are furnished RHR when handing is not specied.
Extension Rods: For door heights over 7'0" up to 8'0", 12" extension rods are furnished at no additional charge at the time of device order.
For door heights over 8'0" up to 10'0" extension rods are furnished at prices shown in parts section with the device at the time of order.
MUST specify door height on order line.
930 series trim is available in SP313 and US32D nish only.19 series devices order in SP28 paired with 930 trim are supplied with US32D nish trim.
3' Devices are priced with standard trim and strikes, 4' add $19 list.
Cylinders are not included in the price unless noted.
Sex Bolts:
Three 4122 Sex Bolts are supplied standard no charge, one for hinge side mounting and two for center case mounting.
Six 2729 Sex Bolts are recommended for latch mounting when device is used with hollow core, composite or light gauge hollow
metal doors. See chart below for quantities and list prices.
Application
Sex Bolt 2729
(Optional) List Add
Hollow core, composite or light gauge hollow metal doors 6 54
249
Prices subject to change without notice
19 Series
Commercial /
Medium Duty
PushpadsEXITS
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Device Series F-19-V
FIRE EXIT HARDWARE
Trim/Control
SP28
SP313 US32D
Surface Vertical Rod Devices
(Includes 3788 and 2130 Strikes )
F-19-V-EO 558 946
Trident Trim (must specify handing)
F-19-V-DT 920DT 596 984
F-19-V-NL 920NL 625 1013
Centron Trim (non-handed)
F-19-V-EO 930EO 592 980
F-19-V-DT 930DT 596 984
F-19-V-NL 930NL 611 999
F-19-V-C 930C 605 993
F-19-V-DT 917DT 588 976
Control Trim (non-handed)
F-19-V-DT 918DT 669 1149
F-19-V-NL 918NL 669 1149
Knob Control (handed and eld reversible)
F-19-V-K 911K 669 1149
F-19-V-K-BE 911K-BE 669 1149
F-19-V-K-NL 911K-NL 669 1149
Dane Lever Control (handed and eld reversible)
F-19-V-L 912L 712 1183
F-19-V-L-BE 912L-BE 712 1183
F-19-V-L-NL 912L-NL 712 1183
F-19-V-L-DT 912L-DT 712 1183
Key in Lever (handed and eld reversible)
F-19-V-KIL 914-KIL-KD W/CYL 743 1131
F-19-V-KIL-NL 914-KIL-NL-KD W/CYL 743 1131
F-19-V-KIL-BE 914-KIL-BE 743 1131
F-19-V-KIL-IC 914-KIL-IC W/CYL 786 1174
REFERENCE NOTES:
Handing: F-19-V devices are handed and eld reversible. Devices and Trims are furnished RHR when handing is not specied.
Extension Rods: For door heights over 7'0" up to 8'0", 12" extension rods are furnished at no additional charge at the time of device order.
For door heights over 8'0" up to 10'0" extension rods are furnished at prices shown in parts section with the device at the time of order.
MUST specify door height on order line.
930 series trim is available in SP313 and US32D nish only.19 series devices order in SP28 paired with 930 trim are supplied with US32D nish trim.
3' Devices are priced with standard trim and strikes, 4' add $19 list.
Cylinders are not included in the price unless noted.
Sex Bolts:
Three 4122 Sex Bolts are supplied standard no charge, one for hinge side mounting and two for center case mounting.
Six 2729 are supplied for additional latch case mounting when device is used with wood, composite or non-reinforced hollow metal doors.
Application
Sex Bolt 2729
(Supplied)
Wood, composite or non-reinforced hollow metal doors 6
250
Prices subject to change without notice
19 Series Commercial /
Medium Duty Pushpads EXITS
Price Book 7
Effective May 4, 2019 • Rev. 05/19
19 Device Options
Cylinder Dogging
Not for use with Fire Exit Hardware
Prex List Add
CD Cylinder Dogging available on all 19 series Panic Devices. 62
LD Less Dogging available on all 19 series Panic Devices N/C
Less Bottom Rod
Sufx List Add
LBR Less Bottom Rod available with UL Fire Label at no additional charge on F-19-V devices.
Fire rated LBR devices must be ordered in pairs of Vertical Rod Devices.
For Fire Rated Devices specify one device LBR and second device LBR-AFL. Second device provided
with a Fire Pin.
N/C
* The 19-Series Exit Alarm option has been eliminated. Consult Customer Care for availability and warranty claims.
** (F) 19-V-LBR requires handing
Accessible Device
Sufx List Add
AX Accessible device compliant with the California Building Code (Section 11B-309.4) requirement for 5 lb.
maximum operational force. Available on 3' and 4' AX-19-R, AX-F-19-R, AX-19-V, AX-F-19-V, AX-19-V-LBR,
AX-F-19-V-LBR/LBR-AFL. Trim functions available EO, DT, NL, L, L-BE, L-NL, L-DT, C, KIL, KIL-BE, KIL-NL,
and KIL-IC.
24
251
Prices subject to change without notice
19 Series
Commercial /
Medium Duty
PushpadsEXITS
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Series Trims 19
Trident Trim
Model No. Lever Style Description SP28, SP313 US32D
920DT - Dummy Trim 38 -
920NL - Night Latch 67 -
920 series trim are handed and not eld reversible, specify RHR or LHR.
Centron Trim
Model No. Lever Style Description SP28 US32D, SP313
917DT - Dummy Trim 30 30
930EO - Exit Only - 34
930DT - Dummy Trim - 38
930NL - Night Latch - 53
930C - Night Latch Less Pull - 47
930 series trim are available in SP313 and US32D nish only.
Control Trim
Model No. Lever Style Description SP28, SP313 US15
918DT - Dummy Trim 111 203
918NL - Night Latch 111 203
911K - Knob, Key Locks or Unlocks 111 203
911K-BE - Knob, Blank Escutcheon 111 203
911K-NL - Knob, Night Latch 111 203
911 series trim are handed and eld reversible. Trims are furnished RHR when handing is not specied.
Lever Trim
Model No. Lever Style Description SP28, SP313 US15
912L Dane Lever, Key Locks or Unlocks 154 237
912L-BE Dane Lever, Blank Escutcheon 154 237
912L-NL Dane Lever, Night Latch 154 237
912L-DT Dane Lever, Dummy Trim 154 237
Optional lever designs Quantum and Sutro are available at no additional charge.
912 series trim are handed and eld reversible. Trims are furnished RHR when handing is not specied.
Key In Lever Trims
Model No. Lever Style Description US32D, SP313
914KIL-KD Dane Key in Lever, with Keyed Different Cylinder 185
914KIL-BE Dane Key in Lever, Blank Escutcheon 185
914KIL-NL-KD Dane Key in Lever, Night Latch with Cylinder 185
914KIL-IC Dane Key in Lever with IC Core Cylinder 228
914 series trim are handed and eld reversible. Trims are furnished RHR when handing is not specied.
914 KIL-KD, KIL-NL-KD come standard with a C keyway and 914 KIL-IC come standard with a A keyway.
Consult factory if other keyways are desired to order separately.
Cylinders are not included in price unless noted.
252
Prices subject to change without notice
19 Series Commercial /
Medium Duty Pushpads EXITS
Price Book 7
Effective May 4, 2019 • Rev. 05/19
19 Device Strikes
Rim Strikes
Model Description Unnished US19 US26D US32D SP313
F490 19-R/XX-R Panic and Fire Devices - Opt. 52 ––––
565 19-R/XX-R Panic Devices - Opt. – – 52 –52
F570 19-R/XX-R Panic and Fire Devices - Std. – 52 –––
571 19/XX-R Inactive Leaf 2 7/8" backset - Opt. – 52 –52 –
571A 19/XX-R Inactive Leaf 2 3/8" backset - Opt. – 52 –52 –
Vertical Rod Top Strikes
Model Description Unnished
* 3788 19/24/25/XX-V Panic and Fire Devices 52
* For Flush Transom applications, Specify part number 4215-019 Angle Bracket, add $53 List.
Vertical Rod Bottom Strikes
Model Description Unnished
2130 19-V/24/25/XX-V,C Panic or Fire - Std. 52
4155 19-V/24/25/XX-V,C Panic 52
REFERENCE NOTES:
Refer to device catalogs for specic door application strike requirements.
253
Prices subject to change without notice
19 Series
Commercial /
Medium Duty
PushpadsEXITS
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Device Accessories 19
Cover Plates & Filler Plates
Model No. Description Unnished SP313 US32D
4167 19 TP or DT Controls used on 86 or 161 door preps - 33 50
4168 19 EO used on 86 door preps - 33 50
4170 19 K or L Controls used on 86 or 161 door preps - 33 50
4174 19 Device (push side) used on 86 door preps - 33 50
3722 Strike cover - ASA 4-7/8" 11 - -
3723 Mortise front - 8" x 1-1/4" 11 - -
3721 Lock front - 2-1/4" x 1-1/8" 11 - -
Cylinders
Model No. Description US26D
US4
US10B
US3
US10
US32
US32D
951 Rim Cylinder, Keyed Different 61 63 63 63
986 Threaded 1-1/4" Mortise Cylinder, with Straight Cam Keyed Different 61 63 63 63
985 1-1/8" Mortise Cylinder with Straight Cam 61 63 63 63
REFERENCE NOTES:
Custom keying not available. Falcon G keyway supplied.
Cylinder type determined by trim function.
Cylinder Dogging Kits
Model No. Description Part No. SP28, SP313
19CDK-3 19 Series - 3' device 650060 62
19CDK-4 19 Series - 4' device 650063 62
REFERENCE NOTES:
Cylinder Sold Separately.
When a device is ordered "with CD with Cylinder" a 1-1/4" mortise cylinder (986 Falcon G x straight cam KD) is supplied for CD.
CD Kits can also pair with a 1-1/8" mortise cylinder (985 Falcon G x straight cam KD). Must be ordered separately.
Price Book 7
Effective May 4, 2019 • Rev. 05/19
254
Prices subject to change without notice
19 Series Commercial /
Medium Duty Pushpads EXITS
19 Device Accessories
Dummy Touch Bars
3´ Device pricing below, 4´ add $19 list.
Model No. Description
SP28
SP313
190DT 19 Series Dummy Touch Bar 165
Extension Rods
Part No. Description All Finishes
650006 24/25/19/XX-V Extension Rod 12" (ER12-V) 21
650007 24/25/19/XX-V Extension Rod 24" (ER24-V) 37
650008 24/25/19/XX-V Extension Rod 36" (ER36-V) 60
REFERENCE NOTES:
1) Surface Vertical and Concealed Vertical Rod Devices for door heights over 7'0" up to 8'0", 12" extension rods are furnished at no additional charge at the
time of device order. Must specify door height on order line.
2) For door heights over 8'0" up to 10'0" extension rods are furnished at prices shown above with the device at the time of order. MUST specify door height
on order line.
3) Replacement extension rods can be ordered individually by the part numbers listed above.
Shim Kits
Model No. Description Part # US19
SK19-R 19 Rim Shim Kit - 1/4" 650022 66
SK19-V 19 Surface Vertical Shim Kit - 1/4" 650023 66
REFERENCE NOTES:
19 series shim kits for use on door thickness devices less trim. For devices with trim, consult factory.
All shim kits for use on door thicknesses up to 2". Consult factory for door thickness over 2"
255
Prices subject to change without notice
19 Series
Commercial /
Medium Duty
PushpadsEXITS
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Device Series - Parts 19
(F) 19 Exit Devices
Part No. Description Unnished
SP28
SP313 US32D Black
650307 19-R Center Case 82.00 – – –
650374 F-19-R Center Case 101.00 – – –
650308 19-V Center Case LHR 71.00 – – –
650309 19-V Center Case RHR 71.00 – – –
650384 19-R Center Case Cover Kit (w/Screws) – – – 36.00
650385 19-V Center Case Cover Kit (w/Screws) – – – 36.00
650338 19-R Center Case Cover Mounting Pkg 4.00 – – –
650334 19-V Center Case Cover Mounting Pkg 4.00 – – –
650393 19-V Center Case Retractor Cam 35.00 – – –
650390 19-V Drawbar 10.00 –––
650391 19-V Center Case Drawbar Lever 22.00 –––
650392 19-V Center Case Slidebar Lever 13.00 – – –
4107 19 Channel 3' Door – 122.00 318.00 –
4108 19 Channel 4' Door – 141.00 351.00 –
650297 19 Panic Hex Dogging Kit 4' Door – 81.00 117.00 –
650303 19 Panic Hex Dogging Kit 3' Door – 58.00 95.00 –
610480 19 Panic Dogging Housing 18.00 –––
060109 19 Panic Hex Dogging Key 7/32" (Pkg of 10) 13.00 – – –
060110 19 Panic Dogging Pin (Pkg of 10) 4.00 – – –
650343 19 Channel End Cap Kit (w/Screws) 24.00 – – –
650320 19 End Cap Mounting Bracket with SNB – 10.00 – –
––––
650328 19-R Mounting Pkg – 28.00 – –
650329 F-19-R Mounting Pkg – 28.00 – –
650330 19-V Mounting Pkg – 39.00 – –
650331 F-19-V Mounting Pkg – 39.00 – –
––––
3722 Strike ASA Filler Plate 11.00 – – –
660136 8-32 5/16" UFPHMS STL BO NYL 3.00 – – –
(F) 19 Exit Devices
Part No. Description
SP313
US32D,
SP28
650360 F-19 Channel Cover Plate 3' Door 40.00 37.00
650361 F-19 Channel Cover Plate 4' Door 45.00 40.00
(F) 19-V Surface Vertical Rod and Latches
Part No. Description Unnished
SP28
SP313 US32D Black
650389 19-V Top Latch Case (Latch cover sold separately) 117.00 – – –
650388 19-V Latch Case Cover Kit (w/Screws) – – – 36.00
650337 19-V Latch Cover Mounting Pkg 6.00 –––
––––
650386 Rod Guide Kit (w/Screws) – – – 11.00
610045 Bottom Bolt Assembly 39.00 – – –
650387 Bottom Bolt Guide (Latch cover sold separately) 10.00 –––
––––
4286 19 Top Rod – 69.00 81.00 –
4288 19 Bottom Rod – 69.00 81.00 –
5494 F-19-V Auxiliary Fire Pin Kit (LBR application only) 151.00 – – –
650375 V-F Top Latch Asy Serv PKG 121.00 – – –
660002 #10 x 1 1/4" FPHSMS Clear Zinc 2.00 – – –
256
Prices subject to change without notice
19 Series Commercial /
Medium Duty Pushpads EXITS
Price Book 7
Effective May 4, 2019 • Rev. 05/19
19 Trim Series - Parts
Part No. Description Unnished
SP28, SP313
US32D
050526 Cylinder Locknut Package 13.00 –
650314 700/900 Locking Plate 18.00 –
4270 900 Series Hex Stud 4.00 –
600315 920/930 Cylinder Anchor 18.00 –
600161 914 Tailpiece Guide Pkg 9.00 –
600346 911/912 Tailpiece Guide Package 9.00 –
661565 700/900 Lever Actuator Spring 3.00 –
4349 Control Hex Stud 5.00 –
650371 Tailpiece Pkg 1 3/4" - Service 6.00 –
600339 700/900 NL Spring Pkg 6.00 –
600283 Shear Pin, package of 5 10.00 –
600166 918NL Cylinder Mounting package 11.00 –
650355 912 Dane Lever – 89.00
650356 912 Sutro Lever – 113.00
650358 912 Quantum Lever – 89.00
257
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Prices subject to change without notice
19 Series
Commercial /
Medium Duty
PushpadsEXITS
Notes
Price Book 7
Effective May 4, 2019 • Rev. 05/19
258
Prices subject to change without notice
19 Series Commercial /
Medium Duty Pushpads EXITS
19 and F-19 Rim exit device
Fire and panic
6
5
13
12
14
16
PANIC DEVICE ONLY
FIRE DEVICE ONLY
Fire or
Panic
19
18
20
11
1
2
259
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Prices subject to change without notice
19 Series
Commercial /
Medium Duty
PushpadsEXITS
Rim exit device 19 and F-19
No. Qty. Part no. Description Notes
1 1 650343 19 Channel End Cap Kit (with screws)
2 1 650320 19 End Cap Mounting Bracket with SNB
5 1 4122 Sex Bolt, package of 1, includes machine screw, Z\x - 20 x C\v" PPHMS A
6 1 4107 19 Channel 3’ Door A
1 4108 19 Channel 4’ Door A
11 1 650360 F-19 Channel Cover Plate 3' A
1 650361 F-19 Channel Cover Plate 4'
12 1 650297 19 Panic Hex Dogging Channel Cover, 4' A
1 650303 19 Panic Hex Dogging Channel Cover 3' A
13 1 610480 19 Panic Dogging Housing
14 1 060110 19 Panic Dogging Pin (package of 10)
16 1 060109 19 Panic Hex Dogging Key M\cx" (package of 10)
18 1 F570 F570 Strike (US19)
19 1 650307 19-R Center Case Assembly
650374 F-19-R Center Case Assembly
20 1 650384 19-R Center Case Cover Kit (with screws)
* 1 650328 19-R Mounting Package
* 1 650329 F-19-R Mounting Package
* Item(s) not shown
A Specify by nish: US32D or SP28/SP313
Price Book 7
Effective May 4, 2019 • Rev. 05/19
260
Prices subject to change without notice
19 Series Commercial /
Medium Duty Pushpads EXITS
19-V and F-19-V Surface vertical rod exit device
Panic and fire
6
5
13
12
14
16
5
22
24
25
26
28
30
1
2
31
11
PANIC DEVICE ONLY
FIRE DEVICE ONLY
Fire or
Panic
261
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Prices subject to change without notice
19 Series
Commercial /
Medium Duty
PushpadsEXITS
Surface vertical rod exit device 19-V and F-19-V
No. Qty. Part no. Description Notes
1 1 650343 19 Channel End Cap Kit (with screws)
2 1 650320 19 End Cap Mounting Bracket with SNB
5 1 4122 Sex Bolt, package of 1, includes machine screw (Z\x - 20 x C\v" PPHMS) A
6 1 4107 19 Channel 3’ Door A
1 4108 19 Channel 4’ Door A
11 1 650360 F-19 Channel Cover Plate 3' A
1 650361 F-19 Channel Cover Plate 4' A
12 1 650297 19 Panic Hex Dogging Channel Cover 4' A
1 650303 19 Panic Hex Dogging Channel Cover 3' A
13 1 610480 19 Panic Dogging Housing
14 1 060110 19 Panic Dogging Pin (package of 10)
16 1 060109 19 Panic Hex Dogging Key M\cx" (package of 10)
22 1 650385 19-V Center Case Cover Kit (with screws)
25 1 650392 19-V Center Case Slidebar Lever
26 1 650391 19-V Center Case Drawbar Lever
28 1 650393 19-V Center Case Retractor Cam
30 1 650390 19-V Drawbar
31 1 650308 19-V Center Case LHR
1 650309 19-V Center Case RHR
* 1 650330 19-V Mounting package
* 1 650331 F-19-V Mounting package
* Item(s) not shown
A Specify by nish: US32D or SP28/SP313
Price Book 7
Effective May 4, 2019 • Rev. 05/19
262
Prices subject to change without notice
19 Series Commercial /
Medium Duty Pushpads EXITS
19-V and F-19-V Surface vertical rods and latch cases
Panic and fire
34
33
32
35
36 40
38
39
41
38 42
43
44
44
37
45
39
36
53
263
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Prices subject to change without notice
19 Series
Commercial /
Medium Duty
PushpadsEXITS
Surface vertical rods and latch cases 19-V and F-19-V
No. Qty. Part no. Description Notes
32 1 3788 Vertical Rod Top Strike *
33 2 660002 #10 x 1Z\v" FPHSMS
34 1 650389 19-V Top Latch Case
35 1 060111 Z\," x 1" Cotter Key package of 10
36 1 060114 Rod Guide Screws package of 10
37 1 060113 Latch Screw package of 10
38 2 650388 19-V Latch Case Cover Kit (with screws) A
39 1 650337 19-V Latch Case Cover Mounting package of 4
40 1 4286 19 Top Rod
41 1 4288 19 Bottom Rod
42 1 650387 Bottom Bolt Guide (screws not included)
43 1 2130 Vertical Rod Bottom Strike
44 2 650386 Rod Guide Kit (with screws)
45 1 650006 19/24/25/XX-V Extension Rod 12" A
45 1 650007 19/24/25/XX-V Extension Rod 24" A
45 1 650008 19/24/25/XX-V Extension Rod 36" A
53 1 610045 (F)19-V Bottom Bolt Assembly
* For Flush Transom applications, specify part number 4215-019 angle bracket
A Specify by nish: US32D or SP28/SP313
264
Prices subject to change without notice
1490 Series Commercial /
Medium Duty Pushpads EXITS
Falcon 20 Series
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Devices
SP28 US32D
EXIT HARDWARE
20-R-EO Rim Device Exit Only 3' 249 440
20-V-EO Surface Vertical Rod Device Exit Only 3' 382 607
20-R-EO Rim Device - Exit Only 4' 268 459
20-V-EO Surface Vertical Rod Device Exit Only 4' 401 626
FIRE EXIT HARDWARE
F-20-R-EO Fire Rim Device - Exit Only 3' 311 514
F-20-V-EO Fire Surface Vertical Rod Device - Exit Only 3' 548 684
Trims
SP28 US32D
Model No. Description
212-L Escutcheon Lever - Key Locks or Unlocks 154 209
212-L-NL Escutcheon Lever - Night Latch 154 209
214-KIL Key in Lever Round Rose - Entrance 185 185
214-KIL-NL Key in Lever Round Rose - Night Latch 185 185
214-KIL-BE Key in Lever Round Rose - Passage 185 185
218-NL Handle Pull Plate - Night Latch 98 139
218-TP Handle Pull Plate - Thumbpiece 215 226
240-NL Raised Lip Pull Plate - Night Latch 66 75
265
Prices subject to change without notice
1490 Series
Commercial /
Medium Duty
PushpadsEXITS
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Concealed Vertical Rod Touchbar Exit Devices 1490
PUSH
1490 Series
Devices are priced for 36" x 7',
Aluminum or Hollow Metal Doors.
RL Bottom Latch furnished standard.
(Price includes PB48 Strike.)
Model No. US28
DC13,
DC35 Standard Trim
1490EO 846 869 -
1491DT 1014 1037 9970 Pull
1492NL-OP 978 1001 149CA-NL
w/Rim Cylinder
1493HB-OP 978 1001 149CA-HB
w/Rim Cylinder
1494NL-P 1146 1169 9970 Pull 149CA-NL w/Rim Cylinder
1495HB-P 1146 1169 9970 Pull 149CA-HB w/Rim Cylinder
1498 592 592 N/A Dummy Touchbar Device
REFERENCE NOTES:
Specify Handing RHR or LHR. Device furnished RHR when handing is not specied, both RHR and LHR labels are provided.
Specify if Door Material other than Aluminum.
Not recommended for use on wood doors.
Cylinder assembly furnished in DC35 nish, unless specied. Available nishes DC13, US28 & DC35.
Rim cylinder supplied standard with NL and HB options is C keyway.
1490 Device Options
List Add
Extra Length 42" 1490 Device 35.00
48" 1490 Device 76.00
Extra Length 42" 1498 Device 20.00
48" 1498 Device 25.00
Extension Rods For Door Heights over 7' up to 10' 105.00
Door Thickness For Doors greater than 1 3/4" up to 2 1/4" using cylinder assembly 23.00
Rim Cylinder For Door with cylinder assembly (3216 - C Keyway) 89.00
7 Pin Cylinder Assembly For Door with cylinder assembly and using 7 pin cylinder 22.00
Risers (1/2") Specify device “x Riser” (example 1490EO x 36" x US28 x Riser) 89.00
Centerlines Change from 40 9/16" standard Device Centerline 102.00
HH Hurricane Device. Available up to 8' device only. Prex device “HH” 20.00
Signal Switch Base Exit Device unit modied with signal switch (SPDT) indicating latch condition.
Prex device "S".
385.00
Electric Latch Retraction Base Exit Device unit modied with Electric Latch Retraction and Signal Switch (SPDT).
Prex device "EL". EL Kits are eld replaceable, please refer to page 263 for part numbers.
874.00
(One PS914 x 900-2RS is the minimum requirement to power one or two EL devices.
See Power Supply Section for requirements and options.)
REFERENCE NOTES:
HH (Hurricane) 1490 devices are hurricane rated by specic door manufacturers. Consult your device manufacturer to assure the HH1490 is hurricane rated
with their door solution.
266
Prices subject to change without notice
1590 Series Commercial /
Medium Duty Pushpads EXITS
Price Book 7
Effective May 4, 2019 • Rev. 05/19
1490 Device Accessories
Offset Pull
Model No. Non-Finish
DC13,
DC35, US28
US26,
US26D
9970 Pull – 168 378
STUD.102 9970 Mounting Stud (Pkg Qty 10) 30 – –
Strikes - Concealed Vertical Rod
Model No. Description Non-Finish
P13 , P35,
US32D
PB48 Top strike for 1990/1490/1690/2390 devices. – 24
SHIM.112 PB48 Strike Shim (Pkg Qty: 10) 25 –
Replacement Cylinders
Model No. Description
US26D,
US10B
3216 Rim Cylinder C Keyway 89
Cylinder Assembly
Model No. Description
US28, DC13,
DC35
149CA-NL Cylinder Assembly Less Cylinder 43
149CA-HB Cylinder Assembly Less Cylinder 43
REFERENCE NOTES:
Door Thickness greater than 1 3/4” up to 2 1/4”, add $23 list. 7 Pin Cylinder applications, add $22 list.
Risers
Model No. Description List Price
RSR1490 1490 Riser Pkg 89
267
Prices subject to change without notice
1590 Series
Commercial /
Medium Duty
PushpadsEXITS
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Rim Type Touchbar Exit Devices 1590
PUSH
1590 Series
Devices are priced 36",
Aluminum or Hollow Metal Doors.
(Price includes TD35 Strike. Retractor needed for cylinder
operation only furnished with 1592/3/4/5.
Model No. US28
DC13,
DC35 Standard Trim
1590EO 696 722 -
1591DT 864 890 9970 Pull
1592NL-OP
(Specify if used on pair of doors with Mullion.)
828 854 159CA-NL
w/Rim Cylinder
1593HB-OP
(Specify if used on pair of doors with Mullion.)
828 854 159CA-HB
w/Rim Cylinder
1594NL-P
(Specify if used on pair of doors with Mullion.)
996 1022 9970 Pull
159CA-NL
w/Rim Cylinder
1595HB-P
(Specify if used on pair of doors with Mullion.)
996 1022 9970 Pull
159CA-HB
w/Rim Cylinder
REFERENCE NOTES:
Specify if Door Material other than Aluminum.
Device furnished non-handed with RHR and LHR Pushbar labels for eld installation.
Cylinder assembly furnished in DC35 nish, unless specied. Available nishes DC13, US28 & DC35.
Rim cylinder supplied standard with NL and HB options is C keyway.
1590 Device Options
List Add
Matching Dummy Touchbar Specify 1498 series. Refer to 1490 Device Page 254 for pricing. –
Extra Length 42" 1590 Device 35.00
48” 1590 Device 76.00
Door Thickness For Doors greater than 1 3/4" up to 2 1/4" using cylinder assembly 23.00
Rim Cylinder For Door with cylinder assembly (3216 - C Keyway) 89.00
7 Pin Cylinder Assembly For Door with cylinder assembly and using 7 pin cylinder 22.00
Risers (1/2") Specify device "x Riser" (example 1590EO x 36" x US28 x Riser) 89.00
Signal Switch Base Exit Device unit modied with signal switch (SPDT) indicating latch condition.
Prex device “S”.
385.00
Electric Latch Retraction Base Exit Device unit modied with Electric Latch Retraction and Signal Switch (SPDT).
Prex device “EL”. EL Kits are eld replaceable, please refer to page 263 for part numbers.
874.00
(One PS914 x 900-2RS is the minimum requirement to power one or two EL devices.
See Power Supply Section for requirements and options.)
268
Prices subject to change without notice
1490 / 1590
Series
Commercial /
Medium Duty Pushpads EXITS
Price Book 7
Effective May 4, 2019 • Rev. 05/19
1590 Device Accessories
Strikes - Rim
Model No. Description Black P28 P13 P35 Non-Fi nish
STK45 Strike for inactive door, pair of doors with 1590/1790/2090 devices – – – 83 –
TD35 Strike for single doors, 1590 and 1790 device – – – 113 –
SHIM.150 TD35 Strike Shim 25 – – – –
SCREW.1016 TD35 Screw 10-32 x 1" FPHMS (Pkg Qty 25) 23 – – – –
4270109590 TD35 Wear Strip – – – – 12
RIVET.101 TD35 Drive Rivet (Pkg Qty 25) – – – – 33
Cylinder Assembly
Model No. Description
US28, DC13,
DC35
159CA-NL Cylinder Assembly Less Cylinder 43
159CA-HB Cylinder Assembly Less Cylinder 43
REFERENCE NOTES:
Door Thickness greater than 1 3/4” up to 2 1/4”, add $23 list. 7 Pin Cylinder applications, add $22 list.
Retractors
Model No. Description List Price
For eld conversion of 1590 inactive device to NL or HB functions.
RTR10 1590 Retractor Single Door 15
RTR11 1590 Retractor Single Door with Riser 15
RTR12 1590 Retractor Pair with Mullion 1 3/4" Door 15
RTR13 1590 Retractor Pair with Mullion 2 1/4" Door 15
RTR14 1590RL Retractor 1 3/4" Door 90
RTR15 1590RL Retractor 2 1/4" Door 90
Risers
Model No. Description List Price
RSR1590 1590 Riser Pkg 89
Replacement Cylinders
Model No. Description
US26D,
US10B
3216 Rim Cylinder C Keyway 89
Offset Pull
Model No. Non-Finish
DC13,
DC35, US28
US26,
US26D
9970 Pull – 168 378
STUD.102 9970 Mounting Stud (Pkg Qty 10) 30 – –
269
Prices subject to change without notice
1490 / 1590
Series
Commercial /
Medium Duty
PushpadsEXITS
Price Book 7
Effective May 4, 2019 • Rev. 05/19
14
19
9
2
6
37
12
13
10
4
7
5
8
18
7
14
20
19
92
6
3
7
1
10
12
13
7
3
8
2
18
21
Exploded View And Parts List 1490/1590 Series
Pushbar
1490 1590
Part No. Description Finish Pkg. Qty Price
1 SCREW.1028 10-32 1/4" UFPHMS Screw - 10 24.00
2 4270106786 1490/1590 Pushbar Mounting Bracket - each 25.00
3 4270106787 1490/1590 Pushbar End Cap P35 each 46.00
4 4270106875 1590 Pushbar End Cap P35 each 21.00
5 4270106863 1590 Center Case Cover P35 P35 each 29.00
6 4270106770 1490/1590 P/Bar Hingeside Mounting Plate - each 13.00
7 SCREW.1050 8-32 1" FH Torx Screw (before September, 2004) - 10 32.00
SCREW.1143 8-18 1.1/4" FPH TF Typ 25 - 10 24.00
8 SCREW.1282 12-24 1 1/2" UFPHMS Screw (1490) - 10 25.00
SCREW.1066 12-24 1" UFPHMS Screw (1590) - 10 25.00
9 SCREW.1053 12-24 1" PPH W/SEMS EXT TF Screw - 10 25.00
10 SCREW.1012 8-32 1/4" UFPHMS Screw US32D 10 12.00
SCREW.1055 8-32 1/4" UFPHMS Screw BLACK 10 12.00
12 BUMPER.103 Pushbar Bumper 4' (2 ea. Required) - each 12.00
13 KEY.102 Short Arm Key - 10 36.00
14 4270107321 1490 RHR/1590 LHR Push Label BLACK each 29.00
4270107323 1490 LHR/1590 RHR Push Label BLACK each 29.00
4270107320 1490 RHR/1590 LHR Push Label GOLD each 29.00
4270107322 1490 LHR/1590 RHR Push Label GOLD each 29.00
270
Prices subject to change without notice
1490 / 1590
Series
Commercial /
Medium Duty Pushpads EXITS
Price Book 7
Effective May 4, 2019 • Rev. 05/19
1490/1590 Series (continued)
Pushbar
Part No. Description Finish Pkg. Qty Price
18 4270107027 1490 Pushbar 36” US28 each 114.00
4270107028 1490 Pushbar 36" DC13 each 119.00
4270107029 1490 Pushbar 36" DC35 each 119.00
4270107685 1490 Pushbar 36" US3 each 1176.00
4270107689 1490 Pushbar 36" US4 each 1176.00
4270107686 1490 Pushbar 36" US10 each 1176.00
4270107691 1490 Pushbar 36" US10B each 1231.00
4270107687 1490 Pushbar 36" US14 each 1231.00
4270107688 1490 Pushbar 36" US15 each 1231.00
18 4270107031 1490 Pushbar 48" US28 each 122.00
4270107032 1490 Pushbar 48" DC13 each 129.00
4270107033 1490 Pushbar 48" DC35 each 129.00
4270107703 1490 Pushbar 48" US3 each 1182.00
4270107707 1490 Pushbar 48" US4 each 1182.00
4270107704 1490 Pushbar 48" US10 each 1182.00
4270107709 1490 Pushbar 48" US10B each 1235.00
4270107705 1490 Pushbar 48" US14 each 1235.00
4270107706 1490 Pushbar 48" US15 each 1235.00
18 4270107091 1590 Pushbar 36" US28 each 122.00
4270107092 1590 Pushbar 36" DC13 each 129.00
4270107093 1590 Pushbar 36" DC35 each 129.00
4270107712 1590 Pushbar 36" US3 each 1176.00
4270107716 1590 Pushbar 36" US4 each 1176.00
4270107713 1590 Pushbar 36" US10 each 1176.00
4270107718 1590 Pushbar 36" US10B each 1238.00
4270107714 1590 Pushbar 36" US14 each 1238.00
4270107715 1590 Pushbar 36" US15 each 1238.00
18 4270107095 1590 Pushbar 48" US28 each 139.00
4270107096 1590 Pushbar 48" DC13 each 144.00
4270107097 1590 Pushbar 48" DC35 each 144.00
EXT.255 1590 Pushbar 48" US3 each 1195.00
EXT.259 1590 Pushbar 48" US4 each 1195.00
EXT.256 1590 Pushbar 48" US10 each 1195.00
EXT.261 1590 Pushbar 48" US10B each 1251.00
EXT.257 1590 Pushbar 48" US14 each 1251.00
EXT.258 1590 Pushbar 48" US15 each 1251.00
19 4270107034 1490 Channel 36" US28 each 114.00
4270107035 1490 Channel 36" DC13 each 119.00
4270107036 1490 Channel 36" DC35 each 119.00
19 4270107038 1490 Channel 48" US28 each 122.00
4270107039 1490 Channel 48" DC13 each 129.00
4270107040 1490 Channel 48" DC35 each 129.00
19 4270107587 1590 Channel 36" US28 each 139.00
4270107588 1590 Channel 36" DC13 each 144.00
4270107589 1590 Channel 36" DC35 each 144.00
19 4270107591 1590 Channel 48" US28 each 151.00
4270107592 1590 Channel 48" DC13 each 159.00
4270107593 1590 Channel 48" DC35 each 159.00
20 ECAP.111 1490 Lockside End Cap Assembly P35 each 36.00
21 ECAP.103 1490 Hingeside End Cap Assembly P35 each 41.00
PKG.102 1490 Mounting Package US28 each 23.00
PKG.104 1490 Mounting Package DC35 each 24.00
PKG.105 1590 Mounting Package - each 23.00
271
Prices subject to change without notice
1490 / 1590
Series
Commercial /
Medium Duty
PushpadsEXITS
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Exploded View And Parts List 1490/1590 Series
Activating Baseplate Assembly
1490
1590
7
2
13 19
18
7
8
3
4
6
75
76
14
16
17 11
15
13 19 12
10 714 7
9
13 19
7
1
15
12
714 7
15
20
See panic hardware price list for retractor selections.
11
9
10
8
14
13 19
18
272
Prices subject to change without notice
1490 / 1590
Series
Commercial /
Medium Duty Pushpads EXITS
Price Book 7
Effective May 4, 2019 • Rev. 05/19
1490/1590 Series
Activating Baseplate Assembly
Part No. Description Finish Pkg. Qty Price
14270107603 1590 Latchbolt Assembly - each 122.00
2 4270106769 Lift Lever Axle - each 13.00
3 WASHER.102 Lift Lever Washer - 10 22.00
4 RRING.104 Retaining Ring .500" - 10 15.00
5 4270106773 Link - each 12.00
6 WASHER.103 Link Washer - 10 22.00
7 RRING.105 Retaining Ring .188" - 10 12.00
8 4270107046 Dogging Bracket Assembly - each 69.00
9 971659-79 Dogging Clip - each 37.00
10 4299101020 Compression Spring - each 9.00
11 971660-79 Act. Rod Spring Stop CZNC - each 15.00
12 4270106977 Clevis - each 96.00
13 SCREW.1136 8-32 3/8" PPHMS w/Sems - 10 36.00
14 AXLE.1007 Clevis Assembly Axle - 10 15.00
15 SCREW.1043 10-32 3/8" UFPHMS Screw - 10 15.00
16 4270106745 Lift Lever - each 22.00
17 4270106772 Pivot Pin - each 22.00
18 KEY.10020 Hex Dogging Key 5/32" - 10 46.00
19 WASHER.107 #8 Washer Hi-Collar - 10 13.00
20 4270106888 1590 Retractor-Sgl Dr 1 3/4" (Only furnished with 1592/3/4/5) - each 15.00
4270107422 1590 Retractor-Sgl Dr 2 1/4" (Only furnished with 1592/3/4/5) - each 15.00
4270107520 1590 Retractor-Pair w/Mullion 1 3/4" Dr (Only furnished with 1592/3/4/5) - each 15.00
4270107521 1590 Retractor-Pair w/Mullion 2 1/4" Dr (Only furnished with 1592/3/4/5) - each 15.00
1490 Base Plate Assemblies
4270107061 1490 Baseplate Assembly LHR 36" – each 479.00
4270107048 1490 Baseplate Assembly LHR 48" - each 536.00
4270107047 1490 Baseplate Assembly RHR 36" - each 479.00
4270107060 1490 Baseplate Assembly RHR 48" - each 536.00
4270107089 1590 Baseplate Assembly 36" - each 344.00
4270107090 1590 Baseplate Assembly 48" - each 404.00
273
Prices subject to change without notice
1490 / 1590
Series
Commercial /
Medium Duty
PushpadsEXITS
Price Book 7
Effective May 4, 2019 • Rev. 05/19
7
5
8
11
9
3
4
14
13
13
12
10
16
1
24
25
26
15
14
23
21
20
19
18
14 15
22
14
15
12
10
17
6
11
98
5
4
3
Exploded View And Parts List EL1490/EL1590 Series
Activating Baseplate Assembly
EL1490
EL1590
Price Book 7
Effective May 4, 2019 • Rev. 05/19
274
Prices subject to change without notice
1490 Series Commercial /
Medium Duty Pushpads EXITS
EL1490/EL1590 Series
Activating Baseplate Assembly
Part No. Description Finish Pkg. Qty Price
1 4270107623 EL1590 Latchbolt Assembly 36" - each 347.00
LATCHR.102 EL1590 Latchbolt Assembly 48" - each 352.00
2 4270108763 S1590 Latchbolt Assembly - each 258.00
3 SOLENOID.142 EL Solenoid - each 238.00
4 050534-00 EL Potted Circuit Breaker - each 305.00
5 PLUNGER.101 EL Solenoid Plunger - each 72.00
110388-00 EL Cable Assembly (not shown) - each 46.00
6 4270107193 EL1490 Pull Rod 36" - each 37.00
4270107361 EL1490 Pull Rod 48" - each 44.00
74270107342 EL1590 Push Rod 36" - each 44.00
4270107360 EL1590 Push Rod 48" - each 58.00
8 NUT.103 1/4-20 Hex Nut - 10 6.00
94270107341 EL1590 Link - each 7.00
10 SWITCH.1002 Subminiature Switch Assembly 36" - each 65.00
SWITCH.1004 Subminiature Switch Assembly 48" - each 71.00
11 SCREW.1061 1/4-20 29/32" Soc Shoulder Screw BLACK 10 35.00
SCREW.1136 8-32 3/8" PPH w/Sems Machine Screw - 10 35.00
12 SCREW.1063 2-56 RHMS Screw - 10 7.00
SCREW.1065 8-32 1/4" PPH MS Typ 2A Screw - 10 6.00
14 RRING.105 Retaining Ring .188 - 10 12.00
15 WASHER.103 Link Washer - 10 22.00
16 LEVER.103 EL1590 Release Lever Assembly - each 75.00
17 4270107429 EL1490 Lift Lever Spring-LHR - each 9.00
4270107430 EL1490 Lift Lever Spring-RHR - each 9.00
18 LEVER.104 EL1490 Lift Lever Sub-Assembly LHR - each 35.00
LEVER.105 EL1490 Lift Lever Sub-Assembly RHR - each 35.00
19 4270107194 EL Lift Lever Spacer - each 14.00
20 4270107192 EL1490 Pivot Bracket - each 9.00
21 4270109142 Lift Lever Washer - each 13.00
22 4270107186 Link Pin - each 8.00
23 4270107188 EL1490 Lift Lever Bracket-LHR - each 9.00
4270107189 EL1490 Lift Lever Bracket-RHR - each 9.00
24 4270106773 1490 Link - each 12.00
25 WASHER.102 Lift Lever Washer - 10 21.00
26 RRING.104 Retaining Ring .500 - 10 14.00
27 4270107363 Pivot Pin YZNC STL - each 4.00
S1490/S1590 Baseplate Assemblies
BASEASY.210 S1490 Baseplate Assembly LHR 36" - each 953.00
BASEASY.211 S1490 Baseplate Assembly LHR 48" - each 1009.00
BASEASY.208 S1490 Baseplate Assembly RHR 36" - each 953.00
BASEASY.209 S1490 Baseplate Assembly RHR 48" - each 1009.00
BASEASY.220 S1590 Baseplate Assembly 36" - each 818.00
BASEASY.221 S1590 Baseplate Assembly 48" - each 877.00
EL1490/EL1590 Baseplate Assemblies
KIT.1011 EL1490 Conversion Kit LHR 36" - each 995.00
KIT.1010 EL1490 Conversion Kit RHR 36" - each 995.00
KIT.1013 EL1490 Conversion Kit LHR 48" - each 995.00
KIT.1012 EL1490 Conversion Kit RHR 48" - each 995.00
KIT.1008 EL1590 Conversion Kit 36" - each 995.00
KIT.1009 EL1590 Conversion Kit 48" - each 995.00
275
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Prices subject to change without notice
1490 Series
Commercial /
Medium Duty
PushpadsEXITS
Exploded View And Parts List 1490 Series
Rod Assembly
Standard Rod Assembly EL Rod Assembly
8
14
2
11
3
4
3
10
13
2
1
1
5
5
9
8
14
12
2
6
3
4
3
10
13
2
1
1
5
5
9
7
Part No. Description Finish Pkg. Qty Price
1 RRING.103 Retaining Ring .250 - 25 12.00
2 SCREW.1028 10-32 1/4" UFPH Screw US32D 10 24.00
SCREW.1029 10-32 1/4" UFPH Screw BLACK 10 24.00
3 NUT.101 3/8-24 Jam Nut - 10 24.00
4 4270106796 Lift Bracket Assembly - each 64.00
4270107495 EL Lift Bracket Assembly - each 74.00
5 WASHER.116 Rod Washer - 10 15.00
6 4270108426 EL Hex Rod Guide Assembly US32D each 46.00
GUIDE.101 EL Hex Rod Guide Assembly P35 each 46.00
7 BUSH.107 EL Hex Bushing - 10 24.00
GUIDE.102 HH Hex Rod Guide Assembly P35 each 66.00
8 4270106776 Top Rod 35.000" - each 61.00
9 4270106775 Standard Bottom Rod 31.625" - each 61.00
4270109003 EL Bottom Rod 34.625" - each 68.00
10 4270105926 EL Top Latch - each 151.00
4270101806 SU Top Latch - each 113.00
11 4270100521 RL Bottom Latch - each 96.00
12 4270101830 Hex Bottom Bolt - each 41.00
13 RODASY.110 1490 Top Rod Assembly 7' Dr - each 178.00
4270109078 EL1490 Top Rod Assembly 7' Dr - each 215.00
14 RODASY.112 Bottom Rod Assembly - each 106.00
4270109077 EL1490 Bottom Rod Assembly - each 116.00
15 4270106782 1490 Top/Btm Rod Assembly 7' Dr - each 344.00
4270107497 EL1490 Top/Btm Rod Assembly 7' Dr - each 384.00
4270107791 Extension Rod Kit over 7' up to 10' Drs - each 125.00
276
Prices subject to change without notice
1690 Series Commercial /
Medium Duty Pushpads EXITS
Price Book 7
Effective May 4, 2019 • Rev. 05/19
1490 Series Exploded View And Parts List
Cylinder Assembly
Part No. Description Finish Pkg. Qty Price
1 4270107213 Cylinder Collar 1.00" P28 each 24.00
4270107214 Cylinder Collar 1.00" P13 each 24.00
4270107215 Cylinder Collar 1.00" P35 each 24.00
4270109005 Cylinder Collar 7 Pin 1.25" P28 each 36.00
4270109006 Cylinder Collar 7 Pin 1.25" P13 each 36.00
4270109007 Cylinder Collar 7 Pin 1.25" P35 each 36.00
2 4270107286 Cylinder Tube w/Pin 1 3/4" DR - each 38.00
4270107833 Cylinder Tube w/Pin 2" DR - each 66.00
4270107787 Cylinder Tube w/Pin 2 1/4" DR - each 66.00
4270109009 Cylinder Tube w/Pin 7 Pin 1 3/4" DR - each 66.00
4270109190 Cylinder Tube w/Pin 7 Pin 2" DR - each 66.00
4270109630 HH Cylinder Tube w/Pin 2 3/8" DR - each 46.00
CTUBE.232 HH Cylinder Tube w/Pin 7 Pin 2 3/8" DR - each 72.00
3 4270107268 1490 NL Cam Assembly - each 32.00
4270107270 1490 HB Cam Assembly - each 32.00
4270107283 1590 NL Cam Assembly - each 32.00
4270107285 1590 HB Cam Assembly - each 32.00
4 WASHER.108 Cylinder Adaptor Washer - 10 15.00
5 WASHER.109 Cylinder Lock Washer CZNC 10 22.00
WASHER.110 Cylinder Lock Washer BLACK 10 22.00
6 SPRING.105 Cylinder Collar Spring - 10 10.00
7 SCREW.1105 12-24 1.1/2" UFPHMS Screw CZNC 10 25.00
SCREW.1099 12-24 1.1/2" UFPHMS Screw BLACK 10 24.00
5
6
1
2
3
4
7
4
3
2
1
6
5
1490 1590
Hold Back Night Latch
Cam Assembly
277
Prices subject to change without notice
1690 Series
Commercial /
Medium Duty
PushpadsEXITS
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Concealed Vertical Rod Pushpad Exit Devices 1690
1690 Series
Devices are priced for 30", 36" x 7',
Aluminum or Hollow Metal Doors.
Hex Bottom Latch furnished standard.
(Price includes PB48 Strike)
Model No. US28
DC13,
DC35 US26 US26D Standard Trim
1690EO 470 502 612 591 –
1691DT 638 669 990 966 9970 Pull
1692NL-OP/HB-OP 559 590 701 677 169CA w/Rim Cylinder
1694NL-P/HB-P 727 758 1079 1055 9970 Pull 169CA
w/Rim Cylinder
REFERENCE NOTES:
Devices are supplied 36" x 7' standard, if not specied.
Rim cylinder supplied standard with NL and HB options is C keyway.
Extra Length
List Add
42" 19.00
48" 27.00
Door Heights over 7'
List Add
Up to 8' 64.00
Up to 9' 82.00
Up to 10' 94.00
Optional Latches
Sufx List Add
RL Rod Bottom Latch 28.00
PL Pullman Bottom Latch 28.00
ES Top Latch for use with Electric Strikes
Device Furnished LBR (Less Bottom Rod and Less Strike) deduct $23 List
32.00
Less Rods For retrot of 1990 crossbar device, deduct $46 List
Device Options
List Add
RX Switch Base Exit Device unit modied Request to Exit Switch monitoring pushpad.
Prex device "RX".
209.00
Electric Latch Retraction Base Exit Device unit modied with Electric Latch Retraction.
Prex device "EL".
The EL option is not eld replaceable on this model.
562.00
(One PS914 x 900-2RS is the minimum requirement to power one or two EL devices.
See Power Supply Section for requirements and options.)
Electric Dogging Base Exit Device unit modied with Electric Dogging
Prex device "ED".
562.00
HH Hurricane device. Available up to 8' device only. Prex device "HH".
HH is for a Hurricane device for all door manufactures other than YKK.
112.00
HHYKK Hurricane device. Available up to 8' device only. Prex device "HHYKK".
HHYKK is for a Hurricane device for door manufacture YKK.
112.00
REFERENCE NOTES:
For EL1690 Door widths other than the standard size (30", 36", 42" or 48"), please specify exact door width. For non-standard widths, the price of the next
widest standard size will apply.
HH (Hurricane) 1690 devices are hurricane rated by specic door manufacturers. Consult your device manufacturer to assure the HH1690 is hurricane rated
with their door solution.
Price Book 7
Effective May 4, 2019 • Rev. 05/19
278
Prices subject to change without notice
1690 Series Commercial /
Medium Duty Pushpads EXITS
1690 Device Accessories
Replacement Cylinders
Model No. Description US26D, US10B
3216 Rim Cylinder C Keyway 89
Strikes - Concealed Vertical Rod
Model No. Description Non-Finish
P13, P35,
US32D
PB48 Top strike for 1990/1490/1690/2390 devices. – 24
SHIM.112 PB48 Strike Shim (Pkg Qty: 10) 25 –
Cylinder Assembly
Model No. Description Non-Finish
169CA Cylinder Assembly Less Cylinder 28
Offset Pull
Model No. Non-Finish
DC13,
DC35, US28
US26,
US26D
9970 Pull – 168 378
STUD.102 9970 Mounting Stud (Pkg Qty 10) 30 – –
279
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Prices subject to change without notice
1690 Series
Commercial /
Medium Duty
PushpadsEXITS
15
14
13
6
17
23
12
9
10
5
4
87
22 20
18
1
19
11
29
30
24
25
3
2
21
31
28
33
32
24
26
36
1
1
34
27
Part No. Description Finish Pkg. Qty Price
1 SCREW.1028 10-32 1/4" UFPHMS US32D 10 24.00
SCREW.1029 10-32 1/4" UFPHMS BLACK 10 24.00
2 BUSH.109 Bearing Bushing - 10 25.00
3 RRING.109 Retaining Ring .250" - 25 22.00
4 SCREW.1069 Lock Stile Mounting Screw - 10 13.00
5 BRKT.138 Lift Bracket - each 24.00
6 KEY.10020 Hex Dogging Key 5/32" - 10 46.00
PKG.150 Auxiliary Package (part 1-6) US28 each 25.00
PKG.151 Auxiliary Package (part 1-6) DC13/DC35 each 25.00
7 BUSH.102 Cylinder Bushing - 10 25.00
8 CAM.102 Pinion Cam - 10 139.00
4270903177 Pinion Cam - each 22.00
9 RETRACT.101 Rod Retractor - 10 58.00
10 SCREW.1074 Retainer Screw - 10 22.00
11 BRKT.478 Pinion Support Bracket - each 9.00
12 COVER.113 Center Case Cover Kit - each 39.00
13 ECAP.130 Channel/Hinge End Cap Kit - each 27.00
Exploded View And Parts List 1690 Series
280
Prices subject to change without notice
1690 Series Commercial /
Medium Duty Pushpads EXITS
Price Book 7
Effective May 4, 2019 • Rev. 05/19
1690 Series Exploded View And Parts List
Part No. Description Finish Pkg. Qty Price
14 SCREW.1070 1/4-20 1/2" PPHMS Screw - 10 12.00
15 SCREW.1072 #8 1.1/2" FPH TC Typ AB Screw (before September, 2004) - 10 12.00
SCREW.1143 8-18 1.1/4" FPH TF Typ 25 - 10 24.00
16 SCREW.1067 1/4-20 3/8" Hex Soc Set Screw BLACK 3 13.00
SCREW.1068 1/4-20 3/8" Hex Soc Set Screw US28 3 13.00
17 KIT.1197 Dogging Kit each 33.00
18 PIN.128 Push Bar Pin - 10 12.00
19 971493-76 Dogging Spring - each 6.00
20 BRKTASY.107 Actuator Arm Bracket Assy - each 15.00
21 ECAP.129 Lock Stile Push Bar End Cap P35 each 15.00
22 SCREW.1077 8-3/4" FPHSMS (before September, 2004) BLACK 10 24.00
SCREW.1141 8-18 .3/4" FPH TF Typ 25 - 10 18.00
23 SCREW.1025 8-5/8" FPHSMS (before September, 2004) BLACK 10 22.00
24 NUT.101 Rod Jam Nut - 10 24.00
25 4270100017 SU/PL/ES/RL Rod (Standard) - each 35.00
4270102427 SU/PL/ES/RL Rod-1/4" Insulclad 7' - each 35.00
4270102426 SU/PL/ES/RL Rod-1/4" Insulclad 8' - each 111.00
4270100018 SU Rod 8' Door each 111.00
4270100172 SU Ext Rod Kit Up to 9' Dr (not shown) - each 98.00
4270100197 SU Ext Rod Kit Up to 10' Dr (not shown) each 114.00
26 4270101825 Hex Bottom Rod - each 35.00
27 BRKTASY.101 Latch Mtg Bracket Kit-HMD - each 48.00
28 l4270100521 RL Bottom Latch - each 96.00
29 l4270101806 SU Top Latch - each 113.00
30 l4270100346 ES Top Latch - each 132.00
31 l4270101482 PL Bottom Latch - each 96.00
32 BOLT.1004 Hex Bottom Bolt Beveled - each 46.00
33 4270107176 Hex Rod Guide Assembly US32D each 39.00
4270107178 Hex Rod Guide Assembly P35 each 39.00
SCREW.1076 Hex Rod Guide Screws US28 10 9.00
SCREW.1081 Hex Rod Guide Screws DC13/DC35 10 9.00
PIN.110 ES Latch Pin - 10 23.00
PIN.109 SU/ES/PL/HH Latch Spirol Pin - 10 18.00
34 SCREW.1037 10-32 3/8" FPHMS - 25 22.00
l4270106632 SU Top Rod Assembly 7' Dr - each 151.00
l4270106633 SU Top Rod Assembly 8' Dr - each 227.00
l4270101818 SU Top Rod Assembly 9' Dr - each 247.00
l4270101819 SU Top Rod Assembly 10' Dr - each 268.00
l4270101873 ES Top Rod Assembly 7' Dr - each 190.00
4270101874 ES Top Rod Assembly 8' Dr - each 288.00
l4270100522 RL Bottom Rod Assembly - each 151.00
RODASY.1075 Hex Bottom Rod Assembly - each 107.00
l4270100266 PL Bottom Rod Assembly - each 155.00
36 BRKT.128 Pushbar Anchor Bracket - each 9.00
REFERENCE NOTES:
lSpecify if door material other than aluminum. Complete rod and latch assembly includes (4270100017) standard rod and (Nut.101).
Part numbers shown are for standard centerlines and assembled lengths.
281
Prices subject to change without notice
1690 Series
Commercial /
Medium Duty
PushpadsEXITS
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Part No. Description Finish Pkg. Qty Price
KIT.1156 NL Cylinder Assy & Auxiliary Parts (parts 1-10) US28 each 61.00
KIT.1157 NL Cylinder Assy & Auxiliary Parts (parts 1-10) DC13/DC35 each 61.00
169CA 1690NL Cylinder Assembly (parts 7-11) - each 28.00
SCREW.1121 10-32 3/8" UFPH TF US28 8 10.00
SCREW.1114 10-32 3/8" UFPH TF DC13/DC35 8 10.00
BRKT.156 Center Case Bracket - each 15.00
SWITCH.1006 RX Switch Wire Assembly (not shown) Valid for Field Install
RX Option on Devices shipped after June, 2002 - each 221.00
050534-00 EL Potted Circuit Breaker (not shown) - each 305.00
971687-00 EL Solenoid 24 VDC (not shown) - each 249.00
PLUNGER.101 EL Plunger (not shown) - each 72.00
110388-00 EL Cable Assembly (not shown) - each 46.00
1690/1790 Pushbars and Channels Standard EL
EXT.827 EXT.830 1690/1790 Pushbar 30” US28 each 106.00
EXT.828 EXT.825 1690/1790 Pushbar 30” DC13 each 122.00
EXT.829 EXT.826 1690/1790 Pushbar 30” DC35 each 122.00
EXT.2351 EXT.2323 1690/1790 Pushbar 30” US3 each 288.00
EXT.2352 EXT.2333 1690/1790 Pushbar 30” US10 each 259.00
EXT.2353 EXT.2338 1690/1790 Pushbar 30” US26 each 288.00
EXT.2354 EXT.2340 1690/1790 Pushbar 30” US26D each 259.00
EXT.608 EXT.398 1690/1790 Pushbar 36” US28 each 106.00
EXT.609 EXT.399 1690/1790 Pushbar 36” DC13 each 122.00
EXT.631 EXT.400 1690/1790 Pushbar 36” DC35 each 122.00
EXT.2355 EXT.2324 1690/1790 Pushbar 36” US3 each 288.00
EXT.2356 EXT.2334 1690/1790 Pushbar 36” US10 each 259.00
EXT.2357 EXT.2339 1690/1790 Pushbar 36” US26 each 288.00
EXT.2358 EXT.2289 1690/1790 Pushbar 36” US26D each 259.00
EXT.646 EXT.438 1690/1790 Pushbar 42” US28 each 114.00
EXT.736 EXT.439 1690/1790 Pushbar 42” DC13 each 136.00
EXT.737 EXT.441 1690/1790 Pushbar 42” DC35 each 136.00
EXT.2359 EXT.2341 1690/1790 Pushbar 42” US3 each 299.00
EXT.2360 EXT.2345 1690/1790 Pushbar 42” US10 each 270.00
EXT.2361 EXT.2349 1690/1790 Pushbar 42” US26 each 299.00
EXT.2362 EXT.2350 1690/1790 Pushbar 42” US26D each 270.00
EXT.738 EXT.442 1690/1790 Pushbar 48” US28 each 122.00
EXT.739 EXT.443 1690/1790 Pushbar 48” DC13 each 144.00
EXT.740 EXT.444 1690/1790 Pushbar 48” DC35 each 144.00
EXT.2363 EXT.2298 1690/1790 Pushbar 48” US3 each 307.00
EXT.2364 EXT.2303 1690/1790 Pushbar 48” US10 each 277.00
EXT.2365 EXT.2304 1690/1790 Pushbar 48” US26 each 307.00
EXT.2366 EXT.2294 1690/1790 Pushbar 48” US26D each 277.00
EXT.175 1690 Channel 27.138 US28 each 25.00
EXT.177 1690 Channel 27.138 DC13 each 39.00
EXT.741 1690 Channel 33.138 US28 each 28.00
EXT.742 1690 Channel 33.138 DC13 each 33.00
EXT.743 1690 Channel 33.138 DC35 each 32.00
EXT.744 1690 Channel 39.138 US28 each 33.00
EXT.745 1690 Channel 39.138 DC13 each 38.00
EXT.746 1690 Channel 39.138 DC35 each 38.00
EXT.747 1690 Channel 45.138 US28 each 37.00
EXT.748 1690 Channel 45.138 DC13 each 45.00
EXT.749 1690 Channel 45.138 DC35 each 48.00
4270109291 1690 Channel 32.250 US28 each 31.00
4270109295 1690 Channel 44.250 US28 each 37.00
4270109293 1690 Channel 44.250 DC35 each 44.00
EXT.178 1690 Channel 27.138 DC35 each 45.00
4270109297 1690 Channel 44.250 DC35 each 54.00
4270109423 1690 Channel 38.250 US28 each 37.00
4270109424 1690 Channel 38.250 DC13 each 37.00
4270109425 1690 Channel 38.250 DC35 each 54.00
EXT.101 1790 Channel 33.580 US28 each 61.00
EXT.102 1790 Channel 39.580 US28 each 64.00
EXT.103 1790 Channel 45.580 US28 each 68.00
4270109571 1790 Channel 33.580 DC13 each 56.00
4270109572 1790 Channel 39.580 DC13 each 66.00
4270109574 1790 Channel 33.580 DC35 each 62.00
4270109575 1790 Channel 39.580 DC35 each 69.00
4270109576 1790 Channel 45.580 DC35 each 75.00
(continued) 1690 Series
282
Prices subject to change without notice
1790 Series Commercial /
Medium Duty Pushpads EXITS
Price Book 7
Effective May 4, 2019 • Rev. 05/19
1790 Series Rim Type Pushpad Exit Devices
1790 Series
Devices are priced for 30" and 36",
Aluminum or Hollow Metal Doors.
(Price includes TD35 Strike)
Model No. US28
DC13,
DC35 US26 US26D Standard Trim
1790EO 428 457 568 548 –
1791DT 596 625 946 926 9970 Pull
1792NL-OP/HB-OP 517 546 657 637 179CA w/Rim Cylinder
1794NL-P/HB-P 685 714 1,035 1,015 9970 Pull 179CA
w/Rim Cylinder
REFERENCE NOTES:
Devices are supplied 36" x 7' standard, if not specied.
Rim cylinder supplied standard with NL and HB options is C keyway.
Lever Control
P28
P13
P35 US15
179L Lever Control 327 365
179L-BE Lever Control, Blank Escutcheon 327 365
179L-NL Lever Control, Night Latch 327 365
REFERENCE NOTES:
Lever Controls are Handed. Specify handing RHR or LHR.
179L Trims are eld retrottable with all 1790 Series Devices.
For initial installation requiring lever trim, the 1790EO is the suggested device to order with the 179L trims.
179L and L-NL require a 1 1/8” mortise cylinder with straight cam, sold separately.
Extra Length
List Add
42" 19.00
48" 27.00
Device Options
List Add
RX Switch Base Exit Device unit modied Request to Exit Switch monitoring pushpad.
Prex device "RX".
209.00
Electric Latch Retraction Base Exit Device unit modied with Electric Latch Retraction.
Prex device "EL".
The EL option is not eld replaceable on this model.
562.00
(One PS914 x 900-2RS is the minimum requirement to power one or two EL devices.
See Power Supply Section for requirements and options.)
Electric Dogging Base Exit Device unit modied with Electric Dogging
Prex device "ED".
562.00
REFERENCE NOTES:
For EL1790 Door widths other than the standard size (30", 36", 42" or 48"), please specify exact door width.
For non-standard widths, the price of the next widest standard size will apply.
283
Prices subject to change without notice
1790 Series
Commercial /
Medium Duty
PushpadsEXITS
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Device Accessories 1790 Series
Replacement Cylinders
Model No. Description US26D, US10B
3216 Rim Cylinder C Keyway 89.00
Cylinder Assembly
Model No. Description Non-Finish
179CA Cylinder Assembly Less Cylinder 28.00
Strikes - Rim
Model No. Description Non-Fi nish Black P35
STK45 Strike for inactive door, pair of doors with 1590/1790/2090 devices – – 83.00
TD35 Strike for single doors, 1590 and 1790 device – – 113.00
SHIM.150 TD35 Strike Shim – 25.00 –
SCREW.1016 TD35 Screw 10-32 x 1" FPHMS (Pkg Qty 25) – 23.00 –
4270109590 TD35 Wear Strip 12.00 – –
RIVET.101 TD35 Drive Rivet (Pkg Qty 25) 33.00 – –
Offset Pull
Model No. Non-Finish
DC13,
DC35, US28
US26,
US26D
9970 Pull – 168.00 378.00
STUD.102 9970 Mounting Stud (Pkg Qty 10) 30.00 – –
Price Book 7
Effective May 4, 2019 • Rev. 05/19
284
Prices subject to change without notice
1790 Series Commercial /
Medium Duty Pushpads EXITS
1790 Series Exploded View And Parts List
1
10
5
4
3
11
9
23 16
8
21 20
19 18
17
15
14
13
6
12
2
22
285
Prices subject to change without notice
1790 Series
Commercial /
Medium Duty
PushpadsEXITS
Price Book 7
Effective May 4, 2019 • Rev. 05/19
1790 Series
Part No. Description Finish Pkg. Qty Price
1ECAP.130 Channel/Hingeside End Cap Kit - each 27.00
2 COVER.120 Center Case Cover Kit - each 39.00
3 KEY.10020 Hex Dogging Key 5/32" - 10 46.00
4 SCREW.1070 1/4-20 1/2" PPHMS Screw - 10 12.00
5 SCREW.1072 #8 1.1/2" FPH TC Typ AB Screw (before September, 2004) - 10 12.00
SCREW.1143 8-18 1.1/4" FPH TF Typ 25 - 10 24.00
6 SCREW.1075 1/4-20 3/4" PPHMS Screw - 10 13.00
SCREW.1121 10-32 3/8" UFPH TF US28 8 10.00
7 PKG.133 Auxiliary Package - each 10.00
8 LBOLT.105 Latch Assembly - each 61.00
SWITCH.1006 RX Switch Wire Assembly (not shown) Valid for Field Install
RX Option on Devices shipped after June, 2002 - each 221.00
050534-00 EL Potted Circuit Breaker (not shown) - each 305.00
971687-00 EL Solenoid 24VDC (not shown) - each 249.00
PLUNGER.101 EL Plunger (not shown) - each 72.00
110388-00 EL Cable Assembly (not shown) - each 46.00
9 PIN.128 Pushbar Pin - 10 12.00
10 971493-76 Dogging Spring - each 6.00
11 KIT.1197 Dogging Kit US28 each 33.00
12 SCREW.1025 8 x 5/8" FPHTC Typ 25 (before July, 2006) - 10 22.00
13 ECAP.129 Lock Stile End Cap DC35 each 15.00
14 SCREW.1077 8-3/4" FPHSMS (before September, 2004) BLACK 10 24.00
SCREW.1141 8-18 .3/4" FPH TF Typ 25 - 10 18.00
15 969467-89 Latch Pin - each 10.00
16 RRING.105 Latch Pin Retaining Clip - 10 12.00
17 4270109548 Short Arm Allen Wrench - each 6.00
18 SCREW.1150 10-32 3/8" UFPH MS - 10 23.00
19 SPACER.107 1790 Channel Spacer - each 18.00
20 CAMASY.101 Drive Bushing - each 48.00
21 SLIDER.101 Slider - each 7.00
22 179CA 1790 NL/HB Cylinder Assembly - each 28.00
23 BRKT.128 Pushbar Anchor Bracket - each 9.00
1790 Pushbars on page 270
Price Book 7
Effective May 4, 2019 • Rev. 05/19
286
Prices subject to change without notice
XX Series Wide Stile Crossbars EXITS
XX-R Device Series
Devices are furnished standard for door widths
up to 4' and priced with standard trim and strikes.
Cylinders are not included in price.
EXIT HARDWARE
Rim Devices
(Includes F570 Strike)
Trim
US4
US10
SP313
US32D US26D
US3
US26
US32
XX-R-EO - 1005 1210 1319 1367
Athena (non-handed)
XX-R-DT 815DT 1128 1437 1546 1594
XX-R-NL 815NL 1140 1454 1563 1611
XX-R-C 815C 1045 1273 1382 1430
XX-R-TP 815TP 1165 1482 1591 1639
XX-R-TP-BE 815TP-BE 1165 1482 1591 1639
*XX-R-TP-NL * 815TP 1165 1482 1591 1639
Knob (non-handed)
XX-R-K 811K 1213 1459 1607 1655
XX-R-K-BE 811K-BE 1213 1459 1607 1655
*XX-R-K-NL * 811K 1213 1459 1607 1655
XX-R-K-DT 811K-DT 1172 1453 1625 1673
Dane Lever (handed and eld reversible)
XX-R-L 812L 1343 1604 1721 1769
XX-R-L-BE 812L-BE 1343 1604 1721 1769
*XX-R-L-NL * 812L 1343 1604 1721 1769
XX-R-L-DT 812L-DT 1343 1604 1721 1769
* NL function is in device, trim does not change.
REFERENCE NOTES:
Handing: Device and Trim are furnished RHR when handing is not specied.
The EO Device is compatible with all device functions except all L and K.
When ordering device only for L and K functions specify device with function "less trim". Example: XX-R-L less trim.
Sex Bolts:
Optional Sex Bolts are recommended for center case and end case mounting when device is used with hollow core wood,
composite or light gauge hollow metal doors. See chart below for quantities and list prices.
Application
Sex Bolt 2729
(Optional) List Add
Hollow core wood, composite or light gauge hollow metal doors - EO (exit only device) 872
Hollow core wood, composite or light gauge hollow metal doors - Device x Athena Trim 872
Hollow core wood, composite or light gauge hollow metal doors - Device x all other Trims 4 36
To be Discontinued - June 2019
287
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Prices subject to change without notice
XX SeriesWide StileCrossbarsEXITS
Device Series F-XX-R
Devices are furnished standard for door widths
up to 4' and priced with standard trim and strikes.
Cylinders are not included in price.
FIRE EXIT HARDWARE
Rim Devices
(Includes F570 Strike)
Control Trim
US4
US10
SP313
US32D US26D
US3
US26
US32
F-XX-R-EO - 1365 1521 1619 1662
Athena (non-handed)
F-XX-R-DT 815DT 1488 1748 1846 1889
F-XX-R-NL 815NL 1500 1765 1863 1906
F-XX-R-C 815C 1405 1584 1682 1725
F-XX-R-TP 815TP 1525 1793 1891 1934
F-XX-R-TP-BE 815TP-BE 1525 1793 1891 1934
*F-XX-R-TP-NL * 815TP 1525 1793 1891 1934
Knob (non-handed)
F-XX-R-K 811K 1573 1770 1907 1950
F-XX-R-K-BE 811K-BE 1573 1770 1907 1950
*F-XX-R-K-NL * 811K 1573 1770 1907 1950
F-XX-R-K-DT 811K-DT 1532 1764 1925 1968
Dane Lever (handed and eld reversible)
F-XX-R-L 812L 1703 1915 2021 2064
F-XX-R-L-BE 812L-BE 1703 1915 2021 2064
*F-XX-R-L-NL * 812L 1703 1915 2021 2064
F-XX-R-L-DT 812L-DT 1703 1915 2021 2064
* NL function is in device, trim does not change.
REFERENCE NOTES:
Handing: Device and Trim are furnished RHR when handing is not specied.
The EO Device is compatible with all device functions except all L and K. When ordering device only for L and K functions specify device with function "less
trim". Example: F-XX-R-L less trim.
Sex Bolts:
Sex Bolts are supplied for center case and end case mounting when device is used with wood,
composite or non-reinforced hollow metal doors. See chart below for quantities.
Application
Sex Bolt 2729
(Supplied)
Wood, composite or non-reinforced hollow metal doors - EO (exit only device) 10
Wood, composite or non-reinforced hollow metal doors - Device x Athena Trim 10
Wood, composite or non-reinforced hollow metal doors - Device x all other Trims 6
To be Discontinued - June 2019
288
Prices subject to change without notice
XX Series Wide Stile Crossbars EXITS
Price Book 7
Effective May 4, 2019 • Rev. 05/19
XX-V Device Series
Devices are furnished standard for door widths
up to 4' and priced with standard trim and strikes.
Cylinders are not included in price.
EXIT HARDWARE
Surface Vertical Rod Devices
(Includes 3788 and 2130 Strikes )
Trim
US4
US10
SP313
US32D US26D
US3
US26
US32
XX-V-EO -1422 1693 1693 1977
Athena (non-handed)
XX-V-DT 815DT 1545 1920 1920 2204
XX-V-NL 815NL 1557 1937 1937 2221
XX-V-C 815C 1462 1756 1756 2040
XX-V-TP 815TP 1582 1965 1965 2249
XX-V-TP-BE 815TP-BE 1582 1965 1965 2249
*XX-V-TP-NL * 815TP 1582 1965 1965 2249
Knob (non-handed)
XX-V-K 811K 1630 1942 1981 2265
XX-V-K-BE 811K-BE 1630 1942 1981 2265
*XX-V-K-NL * 811K 1630 1942 1981 2265
XX-V-K-DT 811K-DT 1589 1936 1999 2283
Dane Lever (handed and eld reversible)
XX-V-L 812L 1760 2087 2095 2379
XX-V-L-BE 812L-BE 1760 2087 2095 2379
*XX-V-L-NL * 812L 1760 2087 2095 2379
XX-V-L-DT 812L-DT 1760 2087 2095 2379
* NL function is in device, trim does not change.
REFERENCE NOTES:
Handing: Device and Trim are furnished RHR when handing is not specied.
The EO Device is compatible with all device functions except all L and K. When ordering device only for L and K functions specify device with function "less
trim". Example: XX-V-L less trim.
Extension Rods: For door heights over 7'0" up to 8'0", 12" extension rods are furnished at no additional charge at the time of device order.
For door heights over 8'0" up to 10'0" extension rods are furnished at prices shown in parts section with the device at the time of order.
MUST specify door height on order line.
Sex Bolts:
Optional Sex Bolts are recommended for center case, end case and latch mounting when device is used with hollow core
wood, composite or light gauge hollow metal doors. See chart below for quantities and list prices.
Application
Latches
Sex Bolt 2729
(Optional)
Center & End Case
Sex Bolt 2729
(Optional) List Add
Hollow core wood, composite or light gauge hollow metal doors - EO (exit only device) 6 8 126
Hollow core wood, composite or light gauge hollow metal doors - Device x Athena Trim 6 8 126
Hollow core wood, composite or light gauge hollow metal doors - Device x all other Trims 6 4 90
To be Discontinued - June 2019
289
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Prices subject to change without notice
XX SeriesWide StileCrossbarsEXITS
Device Series F-XX-V
Devices are furnished standard for door widths
up to 4' and priced with standard trim and strikes.
Cylinders are not included in price.
FIRE EXIT HARDWARE
Surface Vertical Rod Devices
(Includes 3788 and 2130 Strikes )
Control Trim
US4
US10
SP313
US32D US26D
US3
US26
US32
F-XX-V-EO -1978 2231 2409 2482
Athena (non-handed)
F-XX-V-DT 815DT 2101 2458 2636 2709
F-XX-V-NL 815NL 2113 2475 2653 2726
F-XX-V-C 815C 2018 2294 2472 2545
F-XX-V-TP 815TP 2138 2503 2681 2754
F-XX-V-TP-BE 815TP-BE 2138 2503 2681 2754
*F-XX-V-TP-NL * 815TP 2138 2503 2681 2754
Knob (non-handed)
F-XX-V-K 811K 2186 2480 2697 2770
F-XX-V-K-BE 811K-BE 2186 2480 2697 2770
*F-XX-V-K-NL * 811K 2186 2480 2697 2770
F-XX-V-K-DT 811K-DT 2145 2474 2715 2788
Dane Lever (handed and eld reversible)
F-XX-V-L 812L 2316 2625 2811 2884
F-XX-V-L-BE 812L-BE 2316 2625 2811 2884
*F-XX-V-L-NL * 812L 2316 2625 2811 2884
F-XX-V-L-DT 812L-DT 2316 2625 2811 2884
* NL function is in device, trim does not change.
REFERENCE NOTES:
Handing: Device and Trim are furnished RHR when handing is not specied.
The EO Device is compatible with all device functions except all L and K. When ordering device only for L and K functions specify device with function "less
trim". Example: F-XX-V-L less trim.
Extension Rods: For door heights over 7'0" up to 8'0", 12" extension rods are furnished at no additional charge at the time of device order.
For door heights over 8'0" up to 10'0" extension rods are furnished at prices shown in parts section with the device at the time of order.
MUST specify door height
on order line.
Sex Bolts:
Sex Bolts are supplied for center case, end case and latch mounting when device is used with wood,
composite or non-reinforced hollow metal doors. See chart below for quantities.
Application
Latches
Sex Bolt 2729
(Supplied)
Center & End Case
Sex Bolt 2729
(Supplied)
Wood, composite or non-reinforced hollow metal doors - EO (exit only device) 6 8
Wood, composite or non-reinforced hollow metal doors - Device x Athena Trim 6 8
Wood, composite or non-reinforced hollow metal doors - Device x all other Trims 6 4
To be Discontinued - June 2019
Price Book 7
Effective May 4, 2019 • Rev. 05/19
290
Prices subject to change without notice
XX Series Wide Stile Crossbars EXITS
XX-M Device Series
Devices are furnished standard for door widths
up to 4' and priced with standard trim and strikes.
Cylinders are not included in price.
EXIT HARDWARE
Mortise Lock Devices
(Includes 1279 Strike)
Trim US32D
US4
US10 SP313 US26D
US3
US26
US32
XX-M-EO -1477 1314 1549 1571 1614
Athena
XX-M-DT 815DT 1704 1437 1776 1798 1841
XX-M-NL 815NL 1721 1449 1793 1815 1858
XX-M-C 815C 1540 1354 1612 1634 1677
XX-M-TP 815TP 1749 1474 1821 1843 1886
XX-M-TP-BE 815TP-BE 1749 1474 1821 1843 1886
*XX-M-TP-NL * 815TP 1749 1474 1821 1843 1886
Knob
XX-M-K 811K 1726 1522 1798 1859 1902
XX-M-K-BE 811K-BE 1726 1522 1798 1859 1902
*XX-M-K-NL * 811K 1726 1522 1798 1859 1902
XX-M-K-DT 811K-DT 1720 1481 1792 1877 1920
Dane Lever
XX-M-L 812L 1871 1652 1943 1973 2016
XX-M-L-BE 812L-BE 1871 1652 1943 1973 2016
*XX-M-L-NL * 812L 1871 1652 1943 1973 2016
XX-M-L-DT 812L-DT 1871 1652 1943 1973 2016
* NL function is in device, trim does not change.
REFERENCE NOTES:
Handing: The XX-M Device is handed and not eld reversible. Specify handing RHR or LHR.
The Mortise Lock determines function of the device. When ordering device only, specify device with function "Less Trim". Example: XX-M-L less trim.
Sex Bolts:
Optional Sex Bolts are recommended for center case and end case mounting when device is used with hollow core wood,
composite or light gauge hollow metal doors. See chart below for quantities and list prices.
Application
Sex Bolt 2729
(Optional) List Add
Hollow core wood, composite or light gauge hollow metal doors - EO (exit only device) 872
Hollow core wood, composite or light gauge hollow metal doors - Device x Athena Trim 872
Hollow core wood, composite or light gauge hollow metal doors - Device x all other Trims 4 36
To be Discontinued - June 2019
291
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Prices subject to change without notice
XX SeriesWide StileCrossbarsEXITS
Device Series F-XX-M
Devices are furnished standard for door widths
up to 4' and priced with standard trim and strikes.
Cylinders are not included in price.
FIRE EXIT HARDWARE
Mortise Lock Devices
(Includes 1279 Strike)
Control Trim US32D
US4
US10 SP313 US26D
US3
US26
US32
F-XX-M-EO - 1560 1453 1633 1756 1803
Athena
F-XX-M-DT 815DT 1787 1576 1860 1983 2030
F-XX-M-NL 815NL 1804 1588 1877 2000 2047
F-XX-M-C 815C 1623 1493 1696 1819 1866
F-XX-M-TP 815TP 1832 1613 1905 2028 2075
F-XX-M-TP-BE 815TP-BE 1832 1613 1905 2028 2075
*F-XX-M-TP-NL * 815TP 1832 1613 1905 2028 2075
Knob
F-XX-M-K 811K 1809 1661 1882 2044 2091
F-XX-M-K-BE 811K-BE 1809 1661 1882 2044 2091
*F-XX-M-K-NL * 811K 1809 1661 1882 2044 2091
F-XX-M-K-DT 811K-DT 1803 1620 1876 2062 2109
Dane Lever
F-XX-M-L 812L 1954 1791 2027 2158 2205
F-XX-M-L-BE 812L-BE 1954 1791 2027 2158 2205
*F-XX-M-L-NL * 812L 1954 1791 2027 2158 2205
F-XX-M-L-DT 812L-DT 1954 1791 2027 2158 2205
* NL function is in device, trim does not change.
REFERENCE NOTES:
Handing: The XX-M Device is handed and not eld reversible. Specify handing RHR or LHR.
The Mortise Lock determines function of the device. When ordering device only, specify device with function "Less Trim". Example: XX-M-L less trim.
Sex Bolts:
Sex Bolts are supplied for center case and end case mounting when device is used with wood, composite
or non-reinforced hollow metal doors. See chart below for quantities.
Application
Sex Bolt 2729
(Supplied)
Wood, composite or non-reinforced hollow metal doors - EO (exit only device) 8
Wood, composite or non-reinforced hollow metal doors - Device x Athena Trim 8
Wood, composite or non-reinforced hollow metal doors - Device x all other Trims 4
To be Discontinued - June 2019
292
Prices subject to change without notice
XX Series Wide Stile Crossbars EXITS
Price Book 7
Effective May 4, 2019 • Rev. 05/19
XX-C Device Series
Devices are furnished standard for door widths
up to 4' and priced with standard trim and strikes.
Cylinders are not included in price.
EXIT HARDWARE
Concealed Vertical Rod Devices
(Includes 4188 and 2130 Strikes )
Trim/Control US32D
US4
US10 SP313 US26D
US3
US26
US32
XX-C-EO - 1831 1634 1831 2059 2106
Delta
XX-C-DT 717DT 2087 1813 2050 2315 2362
XX-C-DT 718DT 2107 1979 2028 2335 2382
XX-C-NL 718NL 2087 1813 2050 2315 2362
XX-C-C 718C 2028 1773 2010 2256 2303
Knob
XX-C-K 711K 2137 1801 2074 2365 2412
XX-C-K-BE 711K-BE 2137 1801 2074 2365 2412
XX-C-K-NL 711K-NL 2137 1801 2074 2365 2412
Dane Lever Controls
XX-C-L 712L 2208 1970 2183 2436 2483
XX-C-L-BE 712L-BE 2208 1970 2183 2436 2483
XX-C-L-NL 712L-NL 2208 1970 2183 2436 2483
XX-C-L-DT 712L-DT 2208 1970 2183 2436 2483
REFERENCE NOTES:
Handing: All XX-C Devices are handed and not eld reversible. Specify handing RHR or LHR.
The "EO" Device is compatible with all device functions.
Extension Rods: For door heights over 7'0" up to 8'0", 12" extension rods are furnished at no additional charge at the time of device order.
For door heights over 8'0" up to 10'0" extension rods are furnished at prices shown in parts section with the device at the time of order.
MUST specify door height on order line.
Sex Bolts:
Optional Sex Bolts are recommended for center case and end case mounting when device is used with hollow core wood,
composite or light gauge hollow metal doors. See chart below for quantities and list prices.
Application
Sex Bolt 2729
(Optional) List Add
Hollow core wood, composite or light gauge hollow metal doors - EO (exit only device) 872
Hollow core wood, composite or light gauge hollow metal doors - Device x all other Trims 4 36
To be Discontinued - June 2019
293
Prices subject to change without notice
XX SeriesWide StileCrossbarsEXITS
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Device Series F-XX-C
Devices are furnished standard for door widths
up to 4' and priced with standard trim and strikes.
Cylinders are not included in price.
FIRE EXIT HARDWARE
Concealed Vertical Rod Devices
(Includes 4188 and 2130 Strikes )
Trim/Control
US32D
US4
US10 SP313 US26D
US3
US26
US32
F-XX-C-EO -1970 1773 1970 1991 2028
Delta
F-XX-C-DT 717DT 2226 1952 2189 2247 2284
F-XX-C-DT 718DT 2246 2118 2167 2267 2304
F-XX-C-NL 718NL 2226 1952 2189 2247 2284
F-XX-C-C 718C 2167 1912 2149 2188 2225
Knob
F-XX-C-K 711K 2276 1940 2213 2297 2334
F-XX-C-K-BE 711K-BE 2276 1940 2213 2297 2334
F-XX-C-K-NL 711K-NL 2276 1940 2213 2297 2334
Dane Lever Controls
F-XX-C-L 712L 2347 2109 2322 2368 2405
F-XX-C-L-BE 712L-BE 2347 2109 2322 2368 2405
F-XX-C-L-NL 712L-NL 2347 2109 2322 2368 2405
F-XX-C-L-DT 712L-DT 2347 2109 2322 2368 2405
REFERENCE NOTES:
Handing: All XX-C Devices are handed and not eld reversible. Specify handing RHR or LHR.
The "EO" Device is compatible with all device functions.
Extension Rods: For door heights over 7'0" up to 8'0", 12" extension rods are furnished at no additional charge at the time of device order.
For door heights over 8'0" up to 10'0" extension rods are furnished at prices shown in parts section with the device at the time of order.
MUST specify door height on order line.
Sex Bolts:
Sex Bolts are supplied for center case and end case mounting when device is used with wood, composite
or non-reinforced hollow metal doors. See chart below for quantities.
Application
Sex Bolt 2729
(Supplied) List Add
Wood, composite or non-reinforced hollow metal doors - EO (exit only device) 872
Wood, composite or non-reinforced hollow metal doors - Device x all other Trims 4 36
To be Discontinued - June 2019
294
Prices subject to change without notice
XX Series Wide Stile Crossbars EXITS
Price Book 7
Effective May 4, 2019 • Rev. 05/19
XX-CWDC Device Series
Devices are furnished standard for door widths
up to 4' and price with standard trim and strikes.
Cylinders are not included in price.
EXIT HARDWARE
Wood Door Concealed Vertical Rod Devices
(Includes 4188 and 2130 Strikes )
Trim/Control US32D
US4
US10 SP313 US26D
US3
US26
US32
XX-C-WDC-EO - 2535 2216 2535 2721 2766
Delta
XX-C-WDC-DT 717DT 2791 2395 2754 2977 3022
XX-C-WDC-DT 718DT 2811 2561 2732 2997 3042
XX-C-WDC-NL 718NL 2791 2395 2754 2977 3022
XX-C-WDC-C 718C 2732 2355 2714 2918 2963
Knob
XX-C-WDC-K 711K 2841 2383 2778 3027 3072
XX-C-WDC-K-BE 711K-BE 2841 2383 2778 3027 3072
XX-C-WDC-K-NL 711K-NL 2841 2383 2778 3027 3072
Dane Lever Controls
XX-C-WDC-L 712L 2912 2552 2887 3098 3143
XX-C-WDC-L-BE 712L-BE 2912 2552 2887 3098 3143
XX-C-WDC-L-NL 712L-NL 2912 2552 2887 3098 3143
XX-C-WDC-L-DT 712L-DT 2912 2552 2887 3098 3143
REFERENCE NOTES:
Handing: All XX-CWDC Devices are handed and not eld reversible. Specify handing RHR or LHR.
The "EO" Device is compatible with all device functions.
Extension Rods: For door heights over 7'0" up to 8'0", 12" extension rods are furnished at no additional charge at the time of device order.
For door heights over 8'0" up to 10'0" extension rods are furnished at prices shown in parts section with the device at the time of order.
MUST specify door height on order line.
Sex Bolts:
Optional Sex Bolts are recommended for center case and end case mounting when device is used with hollow core or
composite doors. See chart below for quantities and list prices.
Application
Sex Bolt 2729
(Optional) List Add
Hollow core or composite doors - EO (Exit only device) 872
Hollow core or composite doors - Device x all other trim 4 36
To be Discontinued - June 2019
295
Prices subject to change without notice
XX SeriesWide StileCrossbarsEXITS
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Device Series F-XX-C-WDC
Devices are furnished standard for door widths up
to 4' and priced with standard trim and strikes.
Cylinders are not included in price.
FIRE EXIT HARDWARE
Wood Door Concealed Vertical Rod Devices
(Includes 4188 and 2130 Strikes )
Trim/Control US32D
US4
US10 SP313 US26D
US3
US26
US32
F-XX-C-WDC-EO 2729 2410 2729 2915 2960
Delta Trim
F-XX-C-WDC-DT 717DT 2985 2589 2948 3171 3216
F-XX-C-WDC-DT 718DT 3005 2755 2926 3191 3236
F-XX-C-WDC-NL 718NL 2985 2589 2948 3171 3216
F-XX-C-WDC-C 718C 2926 2549 2908 3112 3157
Knob Control
F-XX-C-WDC-K 711K 3035 2577 2972 3221 3266
F-XX-C-WDC-K-BE 711K-BE 3035 2577 2972 3221 3266
F-XX-C-WDC-K-NL 711K-NL 3035 2577 2972 3221 3266
Dane Lever Control
F-XX-C-WDC-L 712L 3106 2746 3081 3292 3337
F-XX-C-WDC-L-BE 712L-BE 3106 2746 3081 3292 3337
F-XX-C-WDC-L-NL 712L-NL 3106 2746 3081 3292 3337
F-XX-C-WDC-L-DT 712L-DT 3106 2746 3081 3292 3337
REFERENCE NOTES:
The "EO" Device is compatible with all device functions.
Handing: All F-XX-CWDC Devices are handed and not eld reversible. Specify handing RHR or LHR.
Extension Rods: For door heights over 7'0" up to 8'0", 12" extension rods are furnished at no additional charge at the time of device order.
For door heights over 8'0" up to 10'0" extension rods are furnished at prices shown in parts section with the device at the time of order.
MUST specify door height on order line.
Handing: All F-XX-CWDC Devices are handed and not eld reversible. Specify handing RHR or LHR.
Sex Bolts:
Sex Bolts are supplied for center case and end case mounting when device is used hollow
core or composite doors.
Application
Sex Bolt 2729
(Supplied)
Hollow core or composite doors - EO (Exit only device) 8
Hollow core or composite doors - Device x all other trim 4
To be Discontinued - June 2019
Price Book 7
Effective May 4, 2019 • Rev. 05/19
296
Prices subject to change without notice
XX Series Wide Stile Crossbars EXITS
XX Device Options
Less Bottom Rod
Sufx List Add
LBR Less Bottom Rod available at no additional charge on Vertical and Concealed Vertical Rod Devices.
Fire rated LBR devices must be ordered in pairs of Vertical Rod Devices.
For Fire Rated Devices specify one device LBR and second device LBR-AFL. Second
device provided with an Auxiliary Fire Pin.
N/C
To be Discontinued - June 2019
297
Prices subject to change without notice
XX SeriesWide StileCrossbarsEXITS
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Series Trims XX
Cylinders are not included in price.
Athena Trim
Model No. Device Type Description
US4
US10
US3, US10B, US26, US26D,
US32, US32D, SP313
815DT R, V, M Dummy Trim 123 227
815NL R, V, M Night Latch 135 244
815C R, V, M Night Latch Less Pull 40 63
815TP R, V, M Thumbpiece, Key Locks or Unlocks 160 272
815TP-BE R, V, M Thumbpiece, Blank Escutcheon 160 272
Delta Trim
Model No. Device Type Description
US4
US10, SP28 SP313
US3, US 15,
US26,
US26D
718DT C Dummy Trim 345 197 276
717DT C Dummy Trim 179 219 256
718NL C Night Latch 179 219 256
718C C Night Latch Less Pull 139 179 197
718 series trim are handed and eld reversible. Trims are furnished RHR when handing is not specied.
Vanguard Trim
Model No. Device Type Description
US4
US10
SP313
US10B
US32D
US3, US26,
US26D, US32
820DT R, V, M Dummy Trim 157 179 179
820NL R, M Night Latch 197 197 237
820TP R Thumbpiece, Key Locks or Unlocks 230 288 300
820TP V, M Thumbpiece, Key Locks or Unlocks 230 288 300
820TP-BE R, M Thumbpiece, Blank Escutcheon 230 288 300
Apollo Trim
Model No. Device Type Description
US4
US10
SP313
US10B
US32D
US3, US26,
US26D, US32
810EO R, V, M Exit Only 123 123 157
810DT R, V, M Dummy Trim 144 179 219
810NL R, M, V Night Latch 155 188 237
810TP R Thumbpiece, Key Locks or Unlocks 178 219 237
810TP V, M Thumbpiece, Key Locks or Unlocks 178 219 237
810TP-BE R, V, M Thumbpiece, Blank Escutcheon 178 219 237
To be Discontinued - June 2019
To be Discontinued - June 2019
To be Discontinued - June 2019
298
Prices subject to change without notice
XX Series Wide Stile Crossbars EXITS
Price Book 7
Effective May 4, 2019 • Rev. 05/19
XX (continued) Series Trims
Cylinders are not included in price.
Knob Trim
Model No. Device Type Description
US4
US10
SP313
US10B
US32D
US3
US15
US26
US26D
US32
811K * R, V, M Knob, Key Locks or Unlocks 208 249 288
711K C Knob, Key Locks or Unlocks 167 243 306
811K-BE * R, V, M Knob, Blank Escutcheon 208 249 288
711K-BE C Knob, Blank Escutcheon 167 243 306
811K-DT * R, V, M Knob, Dummy Trim 167 243 306
711 series trim are handed and eld reversible. Trims are furnished RHR when handing is not specied.
Finish – US15 nish available on 711 series trim only.
Finish – US32D nish available on 811 series trim only.
Lever Trim
Model No. Device Type
Lever
Style Description
US4
US10
SP313
US10B
US32D
US3
US15
US26
US26D
US32
812L * R, V, M Dane Lever, Key Locks or Unlocks 338 394 402
712L C Dane Lever, Key Locks or Unlocks 336 352 377
812L-BE * R, V, M Dane Lever, Blank Escutcheon 338 394 402
712L-BE C Dane Lever, Blank Escutcheon 336 352 377
812L-DT * R, V, M Dane Lever, Dummy Trim 338 394 402
712L-DT C Dane Lever, Dummy Trim 336 352 377
712 and 812 series trim are handed and eld reversible. Trims are furnished RHR when handing is not specied.
The Dane Lever is furnished standard. Optional lever designs Sutro, Quantum and Avalon are available at no additional charge.
Finish – US15 nish available on 712 series trim only.
Finish – US32D nish available on 812 series trim only.
Breakaway Lever Trim
Model No. Device Type
Lever
Style Description
US4
US10
SP313
US10B
US32D
US3
US26
US26D
US32
816L * R, V, M Dane Lever, Key Locks or Unlocks 394 454 460
816L-BE * R, V, M Dane Lever, Blank Escutcheon 394 454 460
816L-NL * R, V, M Dane Lever, Night Latch 394 454 460
816L-DT * R, V, M Dane Lever, Dummy Trim 394 454 460
816 series trim are handed and eld reversible. Trims are furnished RHR when handing is not specied.
The Dane Lever is furnished standard. Optional lever designs Sutro, Quantum and Avalon are available at no additional charge.
* To be Discontinued - June 2019
299
Prices subject to change without notice
XX SeriesWide StileCrossbarsEXITS
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Device Strikes XX
Vertical Rod Top Strikes
Model Description Unnished
* 3788 19/24/25/XX-V Panic and Fire Devices 52
4188 24/25/XX-C,CWDC Panic and Fire Devices 52
* For Flush Transom applications, Specify part number 4215-019 Angle Bracket, add $53 List.
Vertical Rod Bottom Strikes Unnished
2130 19-V/24/25/XX-V,C Panic or Fire - Std. 52
4155 19-V/24/25/XX-V,C Panic 52
Mortise Lock Strikes
Model Description Unnished
1279 25/XX-M Panic and Fire Devices - Std. 52
REFERENCE NOTES:
Refer to device catalogs for specic door application strike requirements.
Rim Strikes
Model Description Unnished US19 US26D US32D US4 US10 SP313 US10B US3 US26 US32
F490 19-R/XX-R Panic and Fire Devices - Opt. 52 – – – – – – – - - -
565 19-R/XX-R Panic Devices - Opt. – – 52 –52 52 52 52 52 52 –
F570 19-R/XX-R Panic and Fire Devices - Std. – 52 – – – – – – - - -
571 19/XX-R Inactive Leaf 2 7/8" backset - Opt. – 52 –52 – – – – - - -
571A 19/XX-R Inactive Leaf 2 3/8" backset - Opt. – 52 –52 – – – – - - -
300
Prices subject to change without notice
XX Series Wide Stile Crossbars EXITS
Price Book 7
Effective May 4, 2019 • Rev. 05/19
XX Device Accessories
Cover Plates & Filler Plates
Model No. Description Unnished
3722 Strike cover - ASA 4-7/8" 11
3723 Mortise front - 8" x 1-1/4" 11
3721 Lock front - 2-1/4" x 1-1/8" 11
Extension Rods
Part No. Description All Finishes
650006 24/25/19/XX-V Extension Rod 12" (ER12-V) 21
650007 24/25/19/XX-V Extension Rod 24" (ER24-V) 37
650008 24/25/19/XX-V Extension Rod 36" (ER36-V) 60
650017 24/25/XX-C, CWDC Extension Rod 12" (ER12-C) 21
650018 24/25/XX-C, CWDC Extension Rod 24" (ER24-C) 37
650019 24/25/XX-C, CWDC Extension Rod 36” (ER36-C) 60
REFERENCE NOTES:
1) Surface Vertical and Concealed Vertical Rod Devices for door heights over 7'0" up to 8'0", 12" extension rods are furnished at no additional charge at the
time of device order. Must specify door height on order line.
2) For door heights over 8'0" up to 10'0" extension rods are furnished at prices shown above with the device at the time of order. MUST specify door height
on order line.
3) Replacement extension rods can be ordered individually by the part numbers listed above.
Cylinders
Model No. Description US26D
US4
US10B
US3,
US10, US32
US32D
951 Rim Cylinder, Keyed Different 61 63 63
986 Threaded 1-1/4" Mortise Cylinder, with Straight Cam Keyed Different 61 63 63
988 Threaded 1-1/2" Mortise Cylinder, with Straight Cam Keyed Different 78 80 –
REFERENCE NOTES:
Custom keying not available. Falcon G keyway supplied.
Cylinder type determined by trim function.
301
Prices subject to change without notice
XX SeriesWide StileCrossbarsEXITS
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Device Series - Parts XX
8500 Mortise Locks
Model No. Description
US4
US10
US3, US10B,
US26, US26D
8500TP Thumbpiece 321.00 401.00
8500L/K Lever/Knob 321.00 401.00
8500NL Night Latch 321.00 401.00
8500EO/DT Exit Only/Dummy Trim 321.00 401.00
8500LBE/KBE Lever Blank Escutcheon/Knob Blank Escutcheon 321.00 401.00
8500TPNL Thumbpiece Night Latch 321.00 401.00
REFERENCE NOTES:
US32D and US32 nish device supplied with US26D and US26 mortise lock.
Mortise Device is handed. For replacement of Mortise Lock only, handing is eld reversible. Lock is furnished RHR when handing is not specied.
8500 Mortise Locks - Parts
Part No. Description Unnished
3518 Dead Lock Arm Spring 7.00
3519 Knob Cam 36.00
3530 Auxiliary Bolt Actuator 36.00
661473 Auxiliary Bolt Spring 7.00
661472 Deadlocking Arm 36.00
3542 Cylinder Operating Arm 36.00
4067 Locking Arm 37.00
610042 Locking Arm and Spring Assembly 38.00
302
Prices subject to change without notice
XX Series Wide Stile Crossbars EXITS
Price Book 7
Effective May 4, 2019 • Rev. 05/19
XX Device Series - Parts
(F) XX Exit Devices
Unnished
US4
US10
US10B
US32D
US3
US26
US32Part No. Description US26D
585 XX-R-EO/TP Center Case 327.00 -- - - -
685 F-XX-R-EO/TP Center Case 525.00 - - - -
587 XX-V-EO Center Case 217.00 - - - -
687 F-XX-V-EO Center Case 357.00 - - - -
582 XX-V-K/L Center Case 272.00 - - - -
F582 F-XX-V-K/L Center Case 414.00 - - - –
583 XX-V-TP Center Case 268.00 - - - -
F583 F-XX-V-TP Center Case 430.00 ----
591 XX-C Center Case 267.00 - - - -
691 F-XX-C Center Case 675.00 - - - -
650145 XX-M Center Case LHR 367.00 - - - -
650146 XX-M Center Case RHR 367.00 - - - -
650149 F-XX-M Center Case LHR 367.00 - - - -
650150 F-XX-M Center Case RHR 367.00 - - - -
3740 XX-R Center Case Cover – 89.00 107.00 125.00 125.00
3742 XX-V Center Case Cover – 89.00 107.00 125.00 125.00
3741 XX-M/C Center Case Cover – 85.00 106.00 124.00 124.00
650381 XX-M Slide Bar Assy LHR 65.00 – – – –
650382 XX-M Slide Bar Assy RHR 65.00 – – – –
661180 XX-R Latch Bolt Assembly 75.00 – – – –
610044 XX-M/V/C Axle Support Housing Assy 85.00 – – – –
3566 XX-V Locking Cam 11.00 – – – –
3755 XX-R Knob Cam 39.00 – – – –
3775 XX-V Knob Cam 39.00 – – – –
3770 XX-R Main Cam Spring 7.00 ––––
610070 XX-R Back Plate 94.00 – – – –
584 XX Series End Case 182.00 – – – –
684 F-XX Series End Case 309.00 – – – –
3746 XX Series Lever Arm RH – 68.00 75.00 94.00 94.00
3747 XX Series Lever Arm LH – 68.00 75.00 94.00 94.00
3749 XX Series Lever Arm Axle 12.00 ––––
3767 XX Series Crossbar – 113.00 113.00 113.00 113.00
660025 1/4-20 Crossbar Retaining Screw 6.00 ––––
060109 Hex Dogging Key 7/32" (Pkg of 10) 13.00 – – – –
060111 Cotter Key 1/8" x 1" (Pkg of 10) 13.00 – – – –
650113 XX-R Mounting Package 31.00 – – – –
650133 F-XX-R Mounting Package 31.00 – – – –
650332 XX-V Mounting Package 46.00 ––––
650134 F-XX-V Mounting Package 46.00 ––––
650318 XX-C Mounting Package 30.00 ––––
650317 F-XX-C Mounting Package 30.00 ––––
650301 F-XX-C-WDC Mounting Package 67.00 ––––
650299 XX-C-WDC Mounting Package – 61.00 61.00 61.00
650137 XX-M Mounting Package 60.00 ––––
650138 F-XX-M Mounting Package 60.00 ––––
650141 XX-R AMS Mounting Package 31.00 – – – –
650333 XX-V AMS Mounting Package 46.00 ––––
650323 XX-C AMS Mounting Package 31.00 – – – –
650142 XX-M AMS Mounting Package 60.00 ––––
XX-Specific Parts - To Be Discontinued - June 2019
303
Prices subject to change without notice
XX SeriesWide StileCrossbarsEXITS
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Device Series - Parts XX
(F) XX Exit Devices (continued)
Unnished
US4
US10
US10B
US32D
US3
US26
US32Part No. Description US26D
650336 XX V Latch Case Cover Mounting Pkg – 4.00 4.00 – –
060121 XX Latch Cover Screw package of 10 – 6.00 6.00 – –
661182 XXLOCKING CAM 7.00 ––––
660439 XX Retaining Ring 4.00 – – – –
650263 XX-C Center Case Finger Kit 27.00 ––––
060123 Screws #8-32 3/8" UFPHMS(10pk) 6.00 ––––
660004 Screws 10 x 1 1/4" PPHSMS 2.00 – – – –
660078 Screws 10-24 x 3/4" FPHMS (Fire) 2.00 – – – –
660429 ¼” CSK Finish Washer 4.00 – – – –
(F) XX Exit Devices - Latches and Rods
Unnished
US4
US10
US10B
US32D
US3
US26
US32Part No. Description US26D
650389 XX-V Top Latch Case 117.00 – – – –
650375 F-XX-V Top Latch Case 121.00 – – – –
650202 XX-V Latch Case Cover Kit – 88.00 68.00 –88.00
650311 XX-V Rod Guide Kit – 49.00 55.00 – 66.00
650387 XX-V Bottom Bolt Guide (Latch cover sold separately) 10.00 –––
3777 XX-V Top Rod Kit – 88.00 88.00 –88.00
610055 XX-V Bottom Rod Kit – 119.00 119.00 – 119.00
5494 F-XX-V Auxiliary Fire Pin Kit (LBR application only) 151.00 – – – –
4400 (F) XX-V Rod Adjusting Screw 2.00 – – – –
603L XX-C Top Latch Case LHR 202.00 – – – –
603R XX-C Top Latch Case RHR 202.00 – – – –
F603 F-XX-C, CWDC Top Latch Case 280.00 – – – –
650339 XX-C Top Latch Release Sub Assembly - 35.00 39.00 35.00 35.00
4567 XX-C Bottom Bolt Guide 48.00 ––––
4835 XX-CWDC Bottom Bolt Guide 44.00 – – – –
4694 XX-CWDC Latch Bracket 10.00 ––––
610037 XX-C Center Slide Assy 316.00 – – – –
4832 XX-CWDC Center Slide Reinforcement Plate 36.00 ––––
4833 24-CWDC Reinforcement Plate – 43.00 32.00 43.00 43.00
4834 24-CWDC Reinforcement Plate w/ Access Hole – 43.00 32.00 43.00 43.00
610061 (F) XX-C Top Rod Kit 88.00 ––––
610057 (F) XX-C, CWDC Bottom Rod Kit 119.00 – – – –
5494 F-XX-C Auxiliary Fire Pin Kit (LBR application only) 151.00 – – – –
660002 #10 x 1 1/4" FPHSMS Clear Zinc 2.00 – – – –
XX-Specific Parts - To Be Discontinued - June 2019
Price Book 7
Effective May 4, 2019 • Rev. 05/19
304
Prices subject to change without notice
XX Series Wide Stile Crossbars EXITS
XX Rim exit device
No. Qty. Part No. Description Notes
1 1 3747 XX Series Lever Arm LH A
2 1 3767 XX Series Crossbar A
3 1 3746 XX Series Lever Arm RH A
4 2 660025 1/4-20 x Z\x” Crossbar
Retaining Screw
5 1 650336 Center Case Cover Mtg Pkg
(US32D)
6 1 650113 XX-R Service Mtg Pkg
7 2 3749 XX Series Lever Arm Axle
8 1 060121 Latch Cover Screw pack-
age of 10 (US4, US10B,
US32D)
B
No. Qty. Part No. Description Notes
9 1 060109 Hex Dogging Key M\cx”
package of 10
10 1 584 XX Series End Case
Assembly
12 13740 XX-R Series Center Case
Cover
A
13 1F570 F570 Strike (US19)
14 23770 XX-R Main Cam Spring
15 1 585 XX-R-EO/TP Center Case
Assembly - Panic
16 1 3741 XX Series End Case Cover A
19 1 610044 XX Axle Support Housing
Assembly
Panic
15
2
16
12
7
9
14
3
1
4
4
19
8
7
10
5
5
13
14
6
6
5
5
8
A Specify by nish: SP313, US3, US4, US10, US10B, US26, US26D, US32, US32D
B Specify by nish shown
XX-Specific Parts - To Be Discontinued - June 2019
305
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Prices subject to change without notice
XX SeriesWide StileCrossbarsEXITS
Rim exit device F-XX
No. Qty. Part No. Description Notes
1 1 3747 XX Series Lever Arm LH A
2 1 3767 XX Series Crossbar A
3 1 3746 XX Series Lever Arm RH A
4 2 660025 1/4-20 x Z\x” Crossbar
Retaining Screw
6 1 650133 F-XX-R Service Mtg Pkg
7 2 3749 XX Series Lever Arm Axle
8 1 060121 Latch Cover Screw pack-
age of 10 (specify by nish:
US4, US10B, US32D)
9 1 060109 Hex Dogging Key M\cx”
package of 10
No. Qty. Part No. Description Notes
12 13740 XX-R Center Case Cover A
13 1F570 F570 Strike (US19)
14 23770 XX-R Main Cam Spring
15 1 685 XX R-EO/TP Center Case
Assembly - Fire
16 1 3741 XX Series End Case Cover A
17 1 684 XX End Case Assembly
- Fire
19 1 610044 XX Axle Support Housing
Assembly
Fire
15
13
2
16
12
7
14
14
3
1
4
4
19 6
7
17
6
13
8
8
A Specify by nish: SP313, US3, US4, US10, US26, US26D, US32, US32D
XX-Specific Parts - To Be Discontinued - June 2019
Price Book 7
Effective May 4, 2019 • Rev. 05/19
306
Prices subject to change without notice
XX Series Wide Stile Crossbars EXITS
(F)XX Rim center case
Panic and fire
No. Qty. Part No. Description Notes
22 1 610070 XX-R Back Plate
23 1 3755 XX-R Knob Cam A
No. Qty. Part No. Description Notes
33 1 661182 Locking Cam
34 1 661180 (F) XX-R Latchbolt Assembly
A Used in K/L functions only.
22
23
34
33
XX-Specific Parts - To Be Discontinued - June 2019
307
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Prices subject to change without notice
XX SeriesWide StileCrossbarsEXITS
Surface vertical rod exit device XX-V
No. Qty. Part No. Description Notes
1 1 3747 XX Lever Arm Left Hand A
2 1 3767 XX Crossbar A
3 1 3746 XX Lever Arm Right Hand A
4 2 660025 1/4-20 x Z\x” Crossbar
Retaining Screw
6 1 650332 XX-V Mounting Package
7 2 3749 XX Series Axle
8 1 060121 Latch Cover Screw package
of 10 (specify by nish: US4,
US10B, US32D)
9 1 060109 M\cx” Hex Dogging Key
package of 10
10 1 584 XX End Case Assembly
No. Qty. Part No. Description Notes
12 13742 XX-V Center Case Cover A
16 1 3741 XX Series End Case Cover A
19 2 610044 XX Axle Support Housing
Assembly
25 1 3566 Locking Cam Operator
27 1 660439 Retaining Ring
28 1 3775 Knob Cam B
30 1 582 XX-V-K/L Center Case
Assembly
587 XX-V-EO Active Center Case
Assembly
33 1 661182 Locking Cam
2
12
3
1
4
4
7
28
33
25
30
10
16
9
19
7
19
6
6
8
8
8
8
27
Panic
A Specify by nish: SP313, US3, US4, US10, US26, US26D, US32, US32D
B K/L function only.
XX-Specific Parts - To Be Discontinued - June 2019
Price Book 7
Effective May 4, 2019 • Rev. 05/19
308
Prices subject to change without notice
XX Series Wide Stile Crossbars EXITS
F-XX-V Surface vertical rod exit device
No. Qty. Part No. Description Notes
1 1 3747 XX Lever Arm LH A
2 1 3767 XX Crossbar A
3 1 3746 XX Lever Arm RH A
4 2 660025 1/4-20 x Z\x” Crossbar Retaining
Screw
6 1 650134 F-XX-V Mounting Package
7 2 3749 XX Series Lever Arm Axle
8 1 060121 Latch Cover Screw package of 10
(specify by nish: US4, US10B,
US32D)
12 13742 F-XX Series Center Case Cover A
No. Qty. Part No. Description Notes
16 1 3741 XX Series End Case Cover A
17 1 684 F-XX Series End Case Assembly
25 1 3566 Locking Cam Operator
27 1 660439 Retaining Ring
28 1 3775 XX-R Knob Cam B
30 1 687 F-XX-V-EO Center Case
F582 F-XX-V-K/L Center Case
F583 F-XX-V-TP Center Case
33 1 661182 Locking Cam
2
16
12
3
1
4
4
17
30
7
7
28
33
25
5
5
8
8
8
8
6
6
27
Fire
A Specify by nish: SP313, US3, US4, US10, US26, US26D, US32, US32D
B K/L function only.
XX-Specific Parts - To Be Discontinued - June 2019
309
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Prices subject to change without notice
XX SeriesWide StileCrossbarsEXITS
Surface vertical rods and latches (F)XX-V
No. Qty. Part No. Description Notes
6 1 650336 Latch Case Cover Mounting
Package (US4, US10B, US32D)
B
26 3 660002 10 x 1Z\v" FPHSMS
3 660078 10-24 x C\v" FPHMS (Fire)
32 1 3788 3788 Strike
39 3 660002 10 x 1Z\v" FPHSMS
40 1 650389 XX Surface Vertical Top Latch
Case Subassembly - Panic
1 650375 XX Surface Vertical Top Latch
Case Subassembly - Fire
41 1 060111 Z\, x 1" Cotter Key package of 10
42 2 660004 10 x 1Z\v" PPHSMS
43 1 2130 2130 Strike
44 1 650202 XX-V Latch Case Cover Kit A
45 13777 XX-V Top Rod Subassembly
46 1 4400 Rod Adj. Screw
47 2 650311 Rod Guide Kit A
48 1 610055 XX-V Bottom Rod Assembly
49 1 650387 Bottom Bolt Guide Bracket
(screws not included)
A
52 1 650006 XX-V Extension Rod 12" A
1 650007 XX-V Extension Rod 24" A
1 650008 XX-V Extension Rod 36" A
40
41
39
45
46
44
32
47
48
44
5
49
47
26
6
42
39
43
52
Panic and fire
A Specify by nish: SP313, US3, US4, US10, US26, US26D, US32, US32D
B Specify by nish shown
XX-Specific Parts - To Be Discontinued - June 2019
Price Book 7
Effective May 4, 2019 • Rev. 05/19
310
Prices subject to change without notice
XX Series Wide Stile Crossbars EXITS
XX-C Concealed vertical rod exit device
No. Qty. Part No. Description Notes
1 1 3747 XX Lever Arm Left Hand A
2 1 3767 XX Crossbar A
3 1 3746 XX Lever Arm Right Hand A
4 2 660025 1/4 - 20 x Z\x” Crossbar
Retaining Screw
6 1 650318 XX-C Mounting Package
7 2 3749 XX Lever Arm Axle
8 4 060121 Latch Cover Screw package
of 10 (US4, US10B, US32D)
B
9 1 060109 M\cx” Hex Dogging Key
package of 10
No. Qty. Part No. Description Notes
10 1 584 XX Series End Case
Assembly
16 2 3741 XX Series End Case Cover A
19 2 610044 XX Axle Support Housing
Assembly
24 13742 XX Vertical Active Center
Case Cover
51 1 650263 Finger Kit
53 1591 XX-C Active Center Case
Assembly
2
16
3
1
4
4
10
53
16
9
7
7
51
8
8
8
8
6
6
19
19
Panic
A Specify by nish: SP313, US3, US4, US10, US26, US26D, US32, US32D
B Specify by nish shown
XX-Specific Parts - To Be Discontinued - June 2019
311
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Prices subject to change without notice
XX SeriesWide StileCrossbarsEXITS
Concealed vertical rod exit device F-XX-C
No. Qty. Part No. Description Notes
1 1 3747 XX Lever Arm Left Hand A
2 1 3767 XX Crossbar A
3 1 3746 XX Lever Arm Right Hand A
4 2 660025 1/4 - 20 x Z\x” Crossbar
Retaining Screw
6 1 650317 F-XX-C Mounting Package
7 2 3749 XX Lever Arm Axle
No. Qty. Part No. Description Notes
8 4 060121 Latch Cover Screw package
of 10 (US4, US10B, US32D)
B
16 2 3741 XX Series End Case Cover
- Fire
A
24 13742 XX Vertical Active Center
Case Cover
51 1 650263 Finger Kit
54 1 691 F-XX-C Active Center Case
Assembly
Fire
2
16
16
3
1
4
4
7
7
8
8
54
51
8
8
6
6
A Specify by nish: SP313, US3, US4, US10, US26, US26D, US32, US32D
B Specify by nish shown
XX-Specific Parts - To Be Discontinued - June 2019
Price Book 7
Effective May 4, 2019 • Rev. 05/19
312
Prices subject to change without notice
XX Series Wide Stile Crossbars EXITS
(F)XX-C Concealed vertical rods and latches
No. Qty. Part No. Description
39 3 660002 10 x 1Z\v" FPHSMS
50 1 2130 2130 Strike
52 1 650006 XX-V Extension Rod 12"
1 650007 XX-V Extension Rod 24"
1 650008 XX-V Extension Rod 36"
55 2 4188 4188 Strike
56 1 650339 XX-C Top Latch Release Bracket Package
57 2 660078 10-24 x C\v" FPHMS
58 1 610061 (F)XX-C Top Rod Kit
59 1 610037 Center Slide Sub Assembly
60 1 610057 (F)XX-C, CWDC Bottom Rod Kit
61 1 4567 Bottom Bolt Guide
64 2 060123 #8-32 C\," UFPHMS 10 pk
Panic and fire
58
60
50
61
39
56
59
55
57
57
52
64
See page 313
for top latches and
required plates
See page 313 for
required plates
XX-Specific Parts - To Be Discontinued - June 2019
313
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Prices subject to change without notice
XX SeriesWide StileCrossbarsEXITS
Fire device
Panic device
Concealed vertical top latches and plates (F)XX-C
No. Qty. Part No. Description Notes
5 1 4122 Sex Bolt, package of 1, includes machine screw (Z\x" -
20 x C\v" PPHMS) (US10B, US26D, BRS)
B
39 6 660002 10 x 1Z\v" FPHSMS
57 6 600078 10-24 x C\v" FPHMS (Fire)
62 1 603L XX-C Top Latch Case LHR
1 603R XX-C Top Latch Case RHR
63 1 F603 F-XX-C, CWDC Top Latch Case
65 1 4834 Top Reinforcement Plate with Access Hole A
66 1 4833 Top Reinforcement Plate A
67 1 4832 XX-CWDC Center Slide Reinforcement Plate
69 1 660429 Z\v" CSK Finish Washer
70 2 4694 Latch Bracket
Metal door
62
57 63
57 57
Panic device and 20-minute re
device
66
63
5
65
39 39
69
90-Minute re device
63
70
70
57 57
Centerslide mounting plate
67
5
5
REFERENCE NOTE:
A Specify by nish: US3, US4, US10, US10B, US15,
US26, US26D, SP28, SP313
B Specify by nish shown
F-XX-C-WDC-20 is no longer available for purchase.
Parts listed for installed SERVICE ONLY.
XX-Specific Parts - To Be Discontinued - June 2019
Price Book 7
Effective May 4, 2019 • Rev. 05/19
314
Prices subject to change without notice
XX Series Wide Stile Crossbars EXITS
XX-M Mortise exit device
No. Qty. Part No. Description Notes
1 1 3747 XX Lever Arm Left Hand A
2 1 3767 XX Crossbar A
3 1 3746 XX Lever Arm Right Hand A
4 2 660025 1/4-20 x 1/2” Crossbar
Retaining Screw
5 1 650336 Latch Case Cover Mounting
Package (US4, US10B,
US32D)
B
6 1 650137 XX-M Service Mounting
Package
7 2 3749 XX Lever Arm Axle
No. Qty. Part No. Description Notes
8 4 060121 Latch Cover Screw package
of 10 (US4, US10B, US32D)
B
9 1 060109 Hex Dogging Key M\cx" pack-
age of 10
10 1 584 XX End Case Assembly
16 2 3741 XX Series End Case Cover A
19 2 610044 XX Axle Support Housing
Assembly
73 1 Mortise Lock - 8500 x Func-
tion x Handing
A
75 1 650145 XX-Mortise Center Case LHR
650146 XX-Mortise Center Case RHR
2
16
3
1
4
4
10
72
16
9
8
8
73
7
7
19
19
8
8
5
5
5
5
6
6
Panic
A Specify by nish: SP313, US3, US4, US10, US26, US26D, US32, US32D
B Specify by nish shown
XX-Specific Parts - To Be Discontinued - June 2019
315
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Prices subject to change without notice
XX SeriesWide StileCrossbarsEXITS
Mortise exit device F-XX-M
No. Qty. Part No. Description Notes
1 1 3747 XX Lever Arm Left Hand A
2 1 3767 XX Crossbar A
3 1 3746 XX Lever Arm Right Hand A
4 2 660025 1/4-20 x Z\x” Crossbar Retaining Screw
5 4 650336 Latch Case Cover Mounting Package (US4, US10B, US32D) B
6 1 650138 F-XX-M Service Mounting Package
7 2 3749 XX Lever Arm Axle
8 4 060121 Latch Cover Screw package of 10 (US4, US10B, US32D) B
16 2 3741 XX Series End Case Cover - Fire A
18 1 684 F-XX End Case Assembly
19 2 610044 Axle Support Assembly
73 1 Mortise Lock – 8500 x Function x Handing A
75 1 650149 F-XX-Mortise Center Case LHR
650150 F-XX-Mortise Center Case RHR
A Specify by nish: US3, US4, US10, US10B, US26, US26D
B Specify by nish shown
2
16
3
1
4
4
16
7
18
73
7
19
75
19
8
8
8
8
5
5
5
5
6
6
Fire
XX-Specific Parts - To Be Discontinued - June 2019
316
Prices subject to change without notice
1990 Series Narrow Stile Crossbars EXITS
Price Book 7
Effective May 4, 2019 • Rev. 05/19
1990 Concealed Vertical Rod Crossbar Exit Devices
Model No. P28
P13,
P35 US26D
1990EO 490 504 1232 –
1991DT 658 671 1610 9970 Pull
1992NL-OP/HB-OP 579 592 1321 Rim Cylinder only
1993NL/HB 745 760 1699 9970 w/Rim Cylinder
REFERENCE NOTES:
Rim cylinder supplied standard with NL and HB options is C keyway.
Optional Latches
Sufx List Add
RL Rod Bottom Latch 28.00
PL Pullman Bottom Latch 28.00
ES Top Latch for use with Electric Strikes
Device Furnished LBR (Less Bottom Rod and Less Strike) deduct $23.00 List
32.00
Door Heights over 7'
List Add
Up to 8' 64.00
Up to 9' 82.00
Up to 10' 94.00
Crossbar
Crossbar furnished 41" standard - Easily Cut for Job Fitting List Add
Extra Length Crossbar - 48" (Fits Door Width up to 51") - P28, P13, P35 nishes 20.00
Extra Length Crossbar - 48" (Fits Door Width up to 51") - Architectural nishes
Less Crossbar, deduct $116 List
29.00
REFERENCE NOTES:
Specify if Door Material other than Aluminum.
Not recommended for use on wood doors.
1990 Series
Devices are priced for 3'8" x 7',
Aluminum or Hollow Metal Doors.
Hex Bottom Latch furnished standard.
(Price includes PB48 Strike)
317
Prices subject to change without notice
1990 SeriesNarrow StileCrossbarsEXITS
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Device Accessories 1990
Replacement Cylinders
Model No. Description US26D, US10B
3216 Rim Cylinder C Keyway 89
Strikes - Concealed Vertical Rod
Model No. Description Non-Finish P28 P13 P35 US32D
PB48 Top strike for 1990/1490/1690/2390 devices. – – 24 24 24
SHIM.112 PB48 Strike Shim (Pkg Qty: 10) 25 – – – –
Offset Pull
Model No. Non-Finish
DC13,
DC35, US28
US26,
US26D
9970 Pull – 168 378
STUD.102 9970 Mounting Stud (Pkg Qty 10) 30 – –
318
Prices subject to change without notice
1990 Series Narrow Stile Crossbars EXITS
Price Book 7
Effective May 4, 2019 • Rev. 05/19
1990 Exploded View And Parts List
(For Devices Furnished After 5/1/77)
25
24
18
10
11
6
13
11
27
28
5
12
33
21
34 38
2
17
4
3
16
29
7
32
36
39
30
37
29
20
35 38
17
14
8
31
22
10
18
33
26
10
23
10
31
8
9
LEFT HAND REVERSE SHOWN
4
4
Left Hand Reverse Shown
Part No. Description Finish Pkg. Qty Price
2 STUD.101 Case Mounting Stud - 10 29.00
3 BUSH.109 Bearing Bushing - 10 25.00
4 RRING.109 Retaining Ring .250 - 25 22.00
5 CAM.102 Pinion Cam - 10 139.00
4270903177 Pinion Cam - each 22.00
6 BUSH.102 Cylinder Bushing - 10 25.00
7 SCREW.1027 1/4-20 1" FPHTC Typ 23 US32D 10 38.00
SCREW.1015 1/4-20 1" FPHTC Typ 23 BLACK 10 38.00
PIN.115 1990 Axle Pin - 10 129.00
9 SCREW.1022 Dog Screw - 25 113.00
10 SCREW.1028 10-32 1/4" UFPHMS US32D 10 24.00
SCREW.1029 10-32 1/4" UFPHMS BLACK 10 24.00
4270107322 1490 LHR/1590 RHR Push Label GOLD each 29.00
319
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Prices subject to change without notice
1990 SeriesNarrow StileCrossbarsEXITS
1990 Series
Part No. Description Finish Pkg. Qty Price
11 NUT.101 Rod Jam Nut - 10 24.00
12 4270100017 SU/PL/ES/RL Rod - each 35.00
4270102427 SU/PL/ES/RL Rod-1/4" Insulclad 7' - each 35.00
4270102426 SU/PL/ES/RL Rod-1/4" Insulclad 8' - each 111.00
13 4270101825 Hex Bottom Rod - each 35.00
14 WRENCH.101 Allen Wrench - 10 15.00
16 RETRACT.101 Rod Retractor - 10 58.00
17 SCREW.1030 1/4-20 3/8" Hex Soc Set US32D 25 32.00
SCREW.1039 1/4-20 3/8" Hex Soc Set BLACK 25 32.00
18 BRKTASY.101 Latch Mtg Bracket Kit-HMD - each 48.00
21 4270100013 Lift Bracket Assembly - each 25.00
22 KEY.101 Hex Dogging Key - 10 38.00
23 l4270100521 RL Bottom Latch - each 96.00
24 l4270101806 SU Top Latch - each 113.00
25 l4270100346 ES Top Latch - each 132.00
26 l4270101482 PL Bottom Latch - each 96.00
27 4270101830 Hex Bottom Bolt - each 41.00
28 4270107176 Hex Rod Guide Assembly US32D each 39.00
4270107178 Hex Rod Guide Assembly P35 each 39.00
SCREW.1076 Hex Rod Guide Screws US28 10 9.00
SCREW.1081 Hex Rod Guide Screws DC13/DC35 10 9.00
PIN.110 ES Latch Pin - 10 23.00
RETAIN.101 Case Retainer - 10 25.00
PIN.109 SU/ES/PL/HH Latch Spirol Pin - 10 18.00
4270100312 Crossbar Tie Rod - each 72.00
RRING.103 End Case Retaining Ring - 25 12.00
29 PIN.104 Spring Pin - 10 24.00
30 SPRING.103 Tension Spring - 10 32.00
31 BUSH.103 Axle Bushing - 25 32.00
32 RETAIN.102 Spring Retainer - 25 22.00
33 SCREW.1037 10-32 3/8" FPHMS - 25 22.00
l4270106632 SU Top Rod Assembly 7' Dr - each 151.00
l4270106633 SU Top Rod Assembly 8' Dr - each 227.00
l4270101818 SU Top Rod Assembly 9' Dr - each 247.00
l4270101819 SU Top Rod Assembly 10' Dr - each 268.00
l4270101873 ES Top Rod Assembly 7' Dr - each 190.00
4270101874 ES Top Rod Assembly 8' Dr - each 288.00
l4270100522 RL Bottom Rod Assembly - each 151.00
4270101831 Hex Bottom Rod Assembly - each 79.00
l4270100266 PL Bottom Rod Assembly - each 155.00
4270100018 SU Rod 8' Door - each 111.00
4270100172 SU Ext Rod Kit Up to 9' Dr - each 98.00
4270100197 SU Ext Rod Kit Up to 10' Dr - each 114.00
(For Devices Furnished After 5/1/77)
320
Prices subject to change without notice
1990 Series Narrow Stile Crossbars EXITS
Price Book 7
Effective May 4, 2019 • Rev. 05/19
1990 Series
REFERENCE NOTE:
1990/2090 Lever Arms & Housing Assemblies in US nishes are not
compatible with 990/1090 components. Replace with appropriate end case
assembly or active housing assembly.
(For Devices Furnished After 5/1/77)
34 End Case Assy LH
Part No. Finish List Price
LH = Lock Stile assembly for LHR Device or
Hinge Stile assembly for RHR Device
4270902776 P28 204.00
4270902778 P13 226.00
4270902779 P35 226.00
CASE.223 US26D 659.00
36 Lever Arm LH
Part No. Finish List Price
LH = Lock Stile Lever Arm for LHR Device or
Hinge Stile Lever Arm for RHR Device
4270902799 P28 63.00
4270902802 P13 71.00
4270902803 P35 71.00
LARM.180 US26D 237.00
38 Housing Assembly
Part No. Finish List Price
(Includes housing, retainer spring, retainer, dog screw and mounting screws)
4270902787 P28 144.00
4270902789 P13 144.00
4270902790 P35 144.00
HOUSING.231 US26D 412.00
35 End Case Assy RH
Part No. Finish List Price
RH = Lock Stile assembly for RHR Device or
Hinge Stile assembly for LHR Device
4270902782 P28 204.00
4270902784 P13 226.00
4270902785 P35 226.00
CASE.222 US26D 659.00
37 Lever Arm RH
Part No. Finish List Price
RH = Lock Stile Lever Arm for RHR Device or
Hinge Stile Lever Arm for LHR Device
4270902805 P28 63.00
4270902808 P13 71.00
4270902809 P35 71.00
LARM.188 US26D 237.00
39 Crossbar 41"
Part No. Finish List Price
4270900091 US28 144.00
4270900094 DC13 157.00
4270900095 DC35 157.00
Crossbar 48"
Part No. Finish List Price
CBAR.101 US28 164.00
CBAR.116 DC13 179.00
CBAR.135 DC35 179.00
321
Prices subject to change without notice
1990 SeriesNarrow StileCrossbarsEXITS
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Crossbar Devices
Part Number Finish List Price
4270902091 US32D 48.00
4270902095 DC35 48.00
Kit Includes:
Part Number Description Replacement Pkg.
12 RING.108 Retaining Rings RRING.109 (pkg/25)
6 4270100130 1/4-20 x 3/8 Set Screws SCREW.1030 (pkg/25)
6 BUSH.108 Bearing Bushing BUSH.109 (pkg/10)
8 4270101753 Tension Springs SPRING.103 (pkg/10)
2 4270100153 Dogging Screws SCREW.1022 (pkg/25)
10 963128-00 10-32 x 1/4 UFPH MS SCREW.1028 (pkg/10)
6 4299100213 1/4-20 x 1" FPH MS SCREW.1027 (pkg/10)
3 4270100152 Spring Pins PIN.104 (pkg/10)
1 4270100116 Dogging Key KEY.101 (pkg/10)
1 963100-00 1/8" Allen Wrench WRENCH.101 (pkg/10)
3 4270100110 Retractor RETRACT.101 (pkg/10)
4 4270903177 Pinion Cams CAM.102 (pkg/10)
8 4230100017 Center Case Mounting Studs STUD.101 (pkg/10)
6 4270101778 Axle Bushings BUSH.103 (pkg/25)
3 4270108353 PB48 Strike US32D each
4 4270100663 Cylinder Bushings BUSH.102 (pkg/10)
1 4270100013 Lift Bracket Assy each
4 4270106997 Axle Pins PIN.115 (pkg/10)
2 4270100026 3/16 x 13/16 Roll Pins PIN.109 (pkg/10)
2 4270100075 3/16 x 9/16 Roll Pins PIN.110 (pkg/10)
1 4270100299 Dogging Key Tag each
12 4299100997 Retaining Rings RRING.103 (pkg/25)
1 4270100582 Maintenance Kit Box each
8 4270101782 1990 Spring Retainer RETAIN.102 (pkg/25)
3 4270106349 SU Latchbolt each
Panic Device Repair Kit
List Price
Complete Repair Kit 4270100583 343.00
Maintenance Kit Box only 4270100582 27.00
Part Number Finish List Price
4270902121 US32D 15.00
4270902125 DC35 15.00
990 and 1990 Auxiliary Pkg. 1090 and 2090 Auxiliary Pkg.
Parts Kit For Easy Servicing
of 1990 Devices
322
Prices subject to change without notice
2090 Series Narrow Stile Crossbars EXITS
Price Book 7
Effective May 4, 2019 • Rev. 05/19
2090 Rim Type Crossbar Exit Devices
2090 Series
Devices are priced for 3'8",
Aluminum or Hollow Metal Doors.
(Price includes SD36 Strike)
Model No. P28
P13,
P35 US26D Standard Trim
2090EO 404 422 1143 –
2091DT 572 589 1521 9970 Pull
2092NL-OP/HB-OP 493 510 1232 Rim Cylinder only
2093NL/HB 660 678 1609 9970 w/Rim Cylinder
REFERENCE NOTES:
Rim cylinder supplied standard with NL and HB options is C keyway.
Crossbar
Crossbar furnished 41" standard - Easily Cut for Job Fitting List Add
Extra Length Crossbar - 48" (Fits Door Width up to 51") - P28, P13, P35 nishes 20.00
Extra Length Crossbar - 48" (Fits Door Width up to 51") - Architectural nishes
Less Crossbar, deduct $116 List
29.00
REFERENCE NOTES:
Specify if Door Material other than Aluminum.
Specify Handing RHR or LHR. Not Reversible.
323
Prices subject to change without notice
2090 SeriesNarrow StileCrossbarsEXITS
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Device Accessories 2090
Replacement Cylinders
Model No. Description US26D, US10B
3216 Rim Cylinder C Keyway 89
Strikes - Rim
Model No. Description
P13,
P28 P35
STK45 Strike for inactive door, pair of doors with 1590/1790/2090 devices – 83
SD35 Strike for 1/3" x 1/2" blade stop, 2090 device. 81 81
SD36 Strike for all stops, 2090 device. 73 73
TD35 Strike for single doors, 1590 or 1790 device. – 113
Offset Pull
Model No. Non-Finish
US28, DC13,
DC35
US26,
US26D
9970 Pull – 168 378
STUD.102 9970 Mounting Stud (Pkg Qty 10) 30 - –
Price Book 7
Effective May 4, 2019 • Rev. 05/19
324
Prices subject to change without notice
2090 Series Narrow Stile Crossbars EXITS
2090 Series Exploded View And Parts List
(For Devices Furnished After 5/1/77)
37
12
28
31
30
30
31
33
32
11
34
37
33 35
39
36
29
7
8
6
1
9
5
16 13 26
14
15
4
3
1
1
8 6 7
11
2
2
Left Hand Reverse Shown
325
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Prices subject to change without notice
2090 SeriesNarrow StileCrossbarsEXITS
Exploded View And Parts List 2090 Series
(For Devices Furnished After 5/1/77)
Part No. Description Finish Pkg. Qty Price
1 STUD.101 Case Mounting Stud - 10 29.00
2 RRING.103 Retaining Ring .250 - 10 12.00
3 CAM.102 Pinion Cam - 10 139.00
4270903177 Pinion Cam - each 22.00
4 BUSH.102 Cylinder Bushing - 10 25.00
5 SCREW.1027 1/4-20 1" FPHTC TYP23 US32D 10 38.00
SCREW.1015 1/4-20 1" FPHTC TYP23 BLACK 10 38.00
PIN.115 2090 Axle Pin US32D 10 129.00
PIN.116 Latch Pivot Pin - 10 12.00
7 SCREW.1022 Dog Screw - 25 113.00
9 WRENCH.101 Allen Wrench - 10 15.00
11 SCREW.1030 1/4-20 3/8" Hex Soc Set Screw US32D 25 32.00
SCREW.1039 1/4-20 3/8" Hex Soc Set Screw BLACK 25 32.00
12 4270100304 Adapter Plate Assembly - 2 29.00
13 SPRING.104 Latch Spring - 10 15.00
14 4270101840 Latch Link - each 13.00
15 SCREW.1031 4-40 3/8" FL Posi-Drive Screw - 10 13.00
16 RETRACT.102 Latchbolt Retractor - 10 162.00
26 RRING.102 Retaining Ring .240 - 10 12.00
28 4270902968 2090 Backplate Assembly LHR - each 67.00
4270902974 2090 Backplate Assembly RHR - each 67.00
29 KEY.101 Hex Dogging Key - 10 38.00
4270100312 Crossbar Tie Rod - each 72.00
30 PIN.104 Spring Pin - 10 24.00
SPRING.103 Tension Spring - 10 32.00
32 BUSH.103 Axle Bushing - 25 32.00
33 RETAIN.102 Spring Retainer - 25 22.00
326
Prices subject to change without notice
2090 Series Narrow Stile Crossbars EXITS
Price Book 7
Effective May 4, 2019 • Rev. 05/19
2090 Series
(For Devices Furnished After 5/1/77)
34 End Case Assy LH
Part No. Finish List Price
LH = Hinge Stile assembly for RHR Device
4270902776 P28 204.00
4270902778 P13 226.00
4270902779 P35 226.00
CASE.223 US26D 659.00
35 Lever Arm LH - Active
Part No. Finish List Price
LH = Lock Stile Lever Arm for LHR Device
4270902763 P28 63.00
4270902766 P13 71.00
4270902767 P35 71.00
LARM.216 US26D 237.00
36 Lever Arm LH - End Case
Part No. Finish List Price
LH = Hinge Stile assembly for RHR Device
4270902799 P28 63.00
4270902802 P13 71.00
4270902803 P35 71.00
LARM.180 US26D 237.00
35 End Case Assy RH
Part No. Finish List Price
RH = Hinge Stile assembly for LHR Device
4270902782 P28 204.00
4270902784 P13 226.00
4270902785 P35 226.00
CASE.222 US26D 659.00
35 Lever Arm RH - Active
Part No. Finish List Price
RH = Lock Stile Lever Arm for RHR Device
4270902769 P28 63.00
4270902772 P13 71.00
4270902773 P35 71.00
LARM.205 US26D 237.00
36 Lever Arm RH - End Case
Part No. Finish List Price
RH = Hinge Stile assembly for LHR Device
4270902805 P28 63.00
4270902808 P13 71.00
4270902809 P35 71.00
LARM.188 US26D 237.00
REFERENCE NOTE:
1990/2090 Lever Arms & Housing Assemblies in US nishes are not
compatible with 990/1090 components. Replace with appropriate end case
assembly or active housing assembly.
327
Prices subject to change without notice
2090 SeriesNarrow StileCrossbarsEXITS
Price Book 7
Effective May 4, 2019 • Rev. 05/19
2090 Series
(For Devices Furnished After 5/1/77)
37 Active Housing Assembly LH
Part No. Finish List Price
LH = Lock Stile assembly for LHR Device
4270902740 P28 260.00
4270902742 P13 279.00
4270902743 P35 279.00
CASE.243 US26D 754.00
39 Crossbar 41"
Part No. Finish List Price
4270900091 US28 144.00
4270900094 DC13 157.00
4270900095 DC35 157.00
37 Active Housing Assembly RH
Part No. Finish List Price
RH = Lock Stile assembly for RHR Device
4270902746 P28 260.00
4270902748 P13 279.00
4270902749 P35 279.00
CASE.229 US26D 754.00
Crossbar 48"
Part No. Finish List Price
CBAR.101 US28 164.00
CBAR.116 DC13 179.00
CBAR.135 DC35 179.00
328
Prices subject to change without notice
2390 Series Concealed Vertical
Mid-Panel Recessed EXITS
Price Book 7
Effective May 4, 2019 • Rev. 05/19
2390 Series Concealed Vertical Rod Mid-Panel Exit Devices
Devices are priced for 42", 48" x 7',
Aluminum Doors.
Hex Bottom Latch furnished standard.
(Price includes PB48 Strike)
Model No. Device Size
Fits Door
Opening US28
DC13,
DC35, Standard Trim
2390EO 21" up to 42" 812 835 -
2390EO 24" up to 48" 867 890 -
2392NL/HB-OP 21" up to 42" 1001 1024 Mortise Cylinder Assy with Cylinder
2392NL/HB-OP 24" up to 48" 1056 1079 Mortise Cylinder Assy with Cylinder
2395NL/HB-OP 21" up to 42" 912 935 Mortise Cylinder Assy less Cylinder
2395NL/HB-OP 24" up to 48" 967 990 Mortise Cylinder Assy less Cylinder
2398 Dummy 21" up to 42" 446 476 -
2398 Dummy 24" up to 48" 479 509 -
NOTE: Must Specify centerline of device.
Optional Cylinder Kit
Model No. Description List Add
239CA NL/HB Kit Less Cylinder 100.00
231CA NL/HB Kit Less Cylinder w/ Schlage Cam B502-191 102.00
3215 Mortise Cylinder C Keyway 89.00
2" Door Kit For Cylinder Operation 37.00
Optional Latches
Sufx Description List Add
RL Rod Bottom Latch 28.00
PL Pullman Bottom Latch 28.00
ES Top Latch for use with Electric Strike 32.00
Device furnished LBR (Less Bottom Rod and Less Strike) deduct $23.00 List
2390 Device Options
List Add
RX Switch Base Exit Device unit modied Request to Exit Switch monitoring pushpad.
Prex device "RX".
209.00
Electric Latch Retraction Base Exit Device unit modied with Electric Latch Retraction.
Prex device "EL". The EL option is not eld replaceable on this model.
562.00
(One PS914 x 900-2RS is the minimum requirement to power one or two EL devices.
See Power Supply Section for requirements and options.)
Accessories
Description List Add
nLong Top Rod For Door Height from 7' to 8' 25.00
nTop Rod with Extension For Door Height from 8' to 9' 83.00
nTop Rod with Extension For Door Height from 9' to 10' 94.00
Extension Rod Kit For Door Height 7' to 10' Field Installation - Part #EXTROD.1001 130.00
Filler Plate Up to 42" Door, 16 1/2" Filler Plate US28 27.00
DC13, DC35, Champagne 29.00
Up to 48" Door, 19 1/2" Filler Plate US28 28.00
DC13, DC35, Champagne 30.00
REFERENCE NOTES:
Rod Length requirement varies with device mounting height.
Strikes - Concealed Vertical Rod
Model No. Description P13 P35 US32D
PB48 Top strike for 1990/1490/1690/2390 devices. 24 24 24
329
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Prices subject to change without notice
2390 Series
Concealed Vertical
Mid-Panel
RecessedEXITS
Notes
Price Book 7
Effective May 4, 2019 • Rev. 05/19
330
Prices subject to change without notice
2390 Series Concealed Vertical
Mid-Panel Recessed EXITS
2390 Exploded View And Parts List
8
1
7
9
10
7
12
26 12
3
16 8
8
17
9
11
15
20
11
24
25
11
19
18
2
3
4
5
6
7
27
4
13 6
21
1
10
23
22
15 15
331
Prices subject to change without notice
2390 Series
Concealed Vertical
Mid-Panel
RecessedEXITS
Price Book 7
Effective May 4, 2019 • Rev. 05/19
2390 Series
Part No. Description Finish Pkg Qty List Price
1971493-76 Dogging Spring - each 6.00
2 AXLE.1006 Lift Lever Axle - each 6.00
3BRKT.137 Pushbar Anchor Bracket - each 15.00
4BRKT.143 Lift Bracket - each 15.00
5 BRKTASY.107 Actuator Arm Bracket Assembly - each 15.00
6 BUSH.109 Bearing Bushing - 10 25.00
7COVER.127 Fixed Cover - each 35.00
8ECAP.143 Moving Pushbar End Cap - each 13.00
9 KEY.10020 Hex Dogging Key 5/32" - 10 46.00
10 KIT.1197 Dogging Kit each 33.00
11 NUT.101 Rod Jam Nut - 10 24.00
12 PIN.128 Pushbar Pin - 10 12.00
PKG.134 Mounting Package (parts 4,6,9,13,15 on page 111) US32D each 25.00
PKG.135 Mounting Package (parts 4,6,9,13,15 on page 111) DC35 each 25.00
13 RRING.109 Retaining Ring .250 - 25 22.00
15 SCREW.1028 10-32 1/4" UFPHMS US32D 10 24.00
SCREW.1029 10-32 1/4" UFPHMS BLACK 10 24.00
16 HSCREW.1077 #8 3/4" FPH TF AB Screw (before September, 2004) - 10 24.00
SCREW.1141 8-18 .3/4" FPH TF Typ 25 - 10 18.00
17 SCREW.1088 12-14 1/2" UFPH MS Typ 25 Screw - 10 18.00
SCREW.1121 10-32 3/8" UFPH TF US28 8 10.00
SCREW.1114 10-32 3/8" UFPH TF DC13/DC35 8 10.00
SCREW.1076 Hex Rod Guide Screws US28 10 9.00
SCREW.1081 Hex Rod Guide Screws DC13/DC35 10 9.00
EXTROD.1001 Extension Rod Kit (not shown) - each 130.00
18 4270107176 Hex Rod Guide Assembly US32D each 39.00
4270107178 Hex Rod Guide Assembly P35 each 39.00
19 BOLT.1004 Hex Bottom Bolt-Beveled - each 46.00
20 4270101806 SU Top Latch - each 113.00
21 4270100346 ES Top Latch - each 132.00
22 4270100521 RL Bottom Latch - each 96.00
23 4270101482 PL Bottom Latch - each 96.00
PIN.110 ES Latch Pin - 10 23.00
PIN.109 SU/ES/PL/HH Latch Spirol Pin - 10 18.00
lSWITCH.1006 RX Switch Wire Assembly (not shown) Valid for Field Install
RX Option on Devices shipped after June, 2002 - each 221.00
110388-00 EL Cable Assembly (not shown) - each 46.00
050534-00 EL Potted Circuit Breaker (not shown) - each 305.00
971687-00 EL Solenoid 24VDC (not shown) - each 249.00
PLUNGER.101 EL Plunger (not shown) - each 72.00
24 ROD.1043 Top Rod 34.000", CL=42.5, DH=83.1875" - each 35.00
4270103324 Top Rod 35.500", CL=41.25, DH=83.1875" - each 35.00
ROD.1082 Top Rod 39.000", CL=37.875, DH=83.1875" - each 35.00
ROD.1036 Top Rod 36.500", CL=40, DH=83.1875" - each 35.00
25 ROD.1080 Bottom Rod 40.000", CL=42.500" - each 35.00
ROD.1044 Bottom Rod 38.500", CL=41.250" - each 35.00
4270100017 Bottom Rod 35.125", CL=37.875" - each 35.00
ROD.1011 Bottom Rod 37.500", CL=40" - each 35.00
KIT.1128 2390 LBR KIT - each 15.00
REFERENCE NOTES:
l RX Switch Kit valid for Field Install RX option on devices shipped after June, 2002
H For Devices shipped before September, 2004.
Price Book 7
Effective May 4, 2019 • Rev. 05/19
332
Prices subject to change without notice
2390 Series Concealed Vertical
Mid-Panel Recessed EXITS
2390 Series (continued)
Part No. Description Finish List Price
26 EXT.3000 Pushbar 21" US28 155.00
EXT.3001 Pushbar 21" DC13 167.00
EXT.3002 Pushbar 21" DC35 167.00
EXT.3003 Pushbar 21" Champagne 167.00
EXT.3004 Pushbar 24" US28 181.00
EXT.3005 Pushbar 24" DC13 199.00
EXT.3006 Pushbar 24" DC35 199.00
EXT.3007 Pushbar 24" Champagne 199.00
27 EXT.3008 Coverplate 21" US28 61.00
EXT.3009 Coverplate 21" DC13 69.00
EXT.3010 Coverplate 21" DC35 69.00
EXT.3011 Coverplate 21" Champagne 69.00
EXT.3012 Coverplate 24" US28 67.00
EXT.3013 Coverplate 24" DC13 79.00
EXT.3014 Coverplate 24" DC35 79.00
EXT.3015 Coverplate 24" Champagne 79.00
EXT.3050 EL Coverplate 21" US28 61.00
EXT.3051 EL Coverplate 21" DC13 69.00
EXT.3052 EL Coverplate 21" DC35 69.00
EXT.3053 EL Coverplate 21" Champagne 69.00
EXT.3054 EL Coverplate 24" US28 67.00
EXT.3055 EL Coverplate 24" DC13 79.00
EXT.3056 EL Coverplate 24" DC35 79.00
EXT.3057 EL Coverplate 24" Champagne 79.00
CHASY.147 Channel Assembly 36" Door (supplied for eld sizing) US28 101.00
CHASY.160 Channel Assembly 36" Door (supplied for eld sizing) DC13 122.00
CHASY.107 Channel Assembly 36" Door (supplied for eld sizing) DC35 122.00
CHASY.158 Channel Assembly 36" Door (supplied for eld sizing) Champagne 163.00
CHASY.108 Channel Assembly 48" Door (supplied for eld sizing) US28 115.00
CHASY.109 Channel Assembly 48" Door (supplied for eld sizing) DC13 165.00
CHASY.125 Channel Assembly 48" Door (supplied for eld sizing) DC35 165.00
CHASY.207 Channel Assembly 48" Door (supplied for eld sizing) Champagne 165.00
EXT.2927 Filler Plate 16.50", 42" Door (supplied for eld sizing) US28 32.00
EXT.2949 Filler Plate 16.50", 42" Door (supplied for eld sizing) DC13 35.00
EXT.2950 Filler Plate 16.50", 42" Door (supplied for eld sizing) DC35 35.00
EXT.2951 Filler Plate 16.50", 42" Door (supplied for eld sizing) Champagne 35.00
EXT.440 Filler Plate 19.50", 48" Door (supplied for eld sizing) US28 33.00
EXT.445 Filler Plate 19.50", 48" Door (supplied for eld sizing) DC13 35.00
EXT.450 Filler Plate 19.50", 48" Door (supplied for eld sizing) DC35 35.00
EXT.2244 Filler Plate 19.50", 48" Door (supplied for eld sizing) Champagne 35.00
l RODASY.10001 Top Rod Assy RHR AL=40.176", CL=42.500", DH=83.1875" 151.00
l RODASY.10002 Top Rod Assy RHR AL=41.426", CL=41.250" DH=83.1875" 151.00
l RODASY.10003 Top Rod Assy RHR AL=44.801", CL=37.875", DH=83.1875" 178.00
l RODASY.10004 Top Rod Assy RHR AL=42.676", CL=40", DH=83.1875" 151.00
l RODASY.10005 Top Rod Assy RHR AL=41.489", CL=41.250", DH=83.1875" 151.00
l RODASY.10006 Top Rod Assy LHR AL=40.176", CL=42.500", DH=83.1875" 151.00
l RODASY.10007 Top Rod Assy LHR AL=41.426", CL=41.250", DH=83.1875" 151.00
l RODASY.10008 Top Rod Assy LHR AL=44.801", CL=37.875", DH=83.1875" 178.00
l RODASY.10009 Top Rod Assy LHR AL=42.676", CL=40", DH=83.1875" 151.00
l RODASY.10010 Top Rod Assy LHR AL=41.489", CL=41.250", DH=83.1875" 151.00
l RODASY.10011 Bottom Rod Assy AL=41.877", CL=42.500" 79.00
l RODASY.10012 Bottom Rod Assy AL=40.627", CL=41.250" 79.00
l RODASY.10013 Bottom Rod Assy AL=37.252", CL=37.875" 79.00
l RODASY.10014 Bottom Rod Assy AL=39.377", CL=40" 79.00
REFERENCE NOTES:
l Complete rod and latch assembly includes standard rod (4270100017) and (Nut.101).
333
Prices subject to change without notice
2390 Series
Concealed Vertical
Mid-Panel
RecessedEXITS
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Cylinder Assembly 2390 Series
8
1
7
9
10
7
12
26 12
3
16 8
8
17
9
11
15
20
11
24
25
11
19
18
2
3
4
5
6
7
27
4
13 6
21
1
10
Part No. Description Finish Pkg Qty List Price
1 HOUSING.123 2390 Cylinder Housing P28 each 87.00
HOUSING.124 2390 Cylinder Housing P13 each 87.00
HOUSING.125 2390 Cylinder Housing P35 each 87.00
2 971974-00 Mortise Locking Collar - each 13.00
3 BRKTASY.118 2390 NL/HB Bracket Assembly - each 41.00
4 971585-89 Mounting Stud - each 11.00
5 WASHER.120 #10 Countersunk Washer DC35 10 13.00
5 WASHER.121 #10 Countersunk Washer US32D 10 13.00
6 SCREW.1083 10-24 x 1" OPHMS US32D 10 15.00
7 SCREW.1082 1/4-20 x 3/8" SHCS - 10 15.00
8 BRKT.152 2390 Rod Lift Bracket - each 24.00
9 SCREW.1084 1/4-28 x 3/4" SHCS - 10 18.00
10 BRKTASY.155 Lift Bracket Kit - 2" Door - each 45.00
11 SCREW.1085 8-18 x 5/16" UFPHSMS AB Screw - each 15.00
Strike
Part No. Description Finish Pkg Qty List Price
SHIM.112 PB48 Strike Shim - 10 25.00
SCREW.1038 Screw 8-32 x 1/2" UFPHMS BLACK 25 15.00
SCREW.1032 Screw 8-32 x 1/2" UFPHMS US32D 25 15.00
334
Prices subject to change without notice
Mullions Accessories EXITS
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Exit Accessories
Mullions
List Price
Model No. Description Finish 7'2" 7'3" 8'2" 8'3" 9'2" 10'2"
4023 Steel Mullion (2" x 3") For use with 25/24/19/XX Rim Devices only SP28 411 –445 ––517
F4023
Steel Mullion (2" x 3") Fire Rated for use with 25/24/19/XX Fire Rated Rim Devices only
SP28 –588 –636 – –
2923
Steel Mullion (1 1/2" x 2 1/2") For use with 25/24/19/XX Rim Devices only
Black Prime Coat 367 –396 –428 –
4423 T Shaped Steel Mullion for use with 24-R Device only
(4396 Adjustable Strike Supplied) Black Prime Coat 1019 – 1042 – – –
RM70 Aluminum Mullion for use with 2090 Rim Devices only
(STK70 Adjustable Mortise Strike Supplied)
US28 747 –803 –864 924
DC13/DC35 791 –850 –907 967
RM150 Aluminum Mullion for use with 1590 Rim Devices only
(STK150 Adjustable Mortise Strike Supplied)
US28 760 –822 –881 941
DC13/DC35 803 –865 –927 989
RM170 Aluminum Mullion for use with 1790 Rim Devices only
(STK170 Adjustable Mortise Strike Supplied)
US28 747 –803 –864 924
DC13/DC35 791 –850 –907 967
REFERENCE NOTES:
1) Mullions shipped complete with mounting brackets, screws, and stabilizers. Strikes are not included, except where indicated. Order with exit devices when
required.
2) Aluminum Mullions for use with doors with stiles as narrow as 1 1/4", reinforced with steel insertions.
3) Blank Aluminum Mullions (without strike preparation) are available at the same price as standard Mullions. Consult factory for more information.
4) Mullions can be cut down in eld if unique heights under 10'2" are required.
5) Steel Mullions 4023 and F4023 now ship with a new design. Part purchased prior to September 1, 2014 are not retrotable.
Mullion Options
Model No.
Prex Description Finish List Adder
KR KR-4023 Mullion Keyed Removable Mullion option for use with 25/24/19/XX Rim Devices only SP28 374
KR-F4023 Mullion Keyed Removable Fire rated Mullion option for use with 25/24/19/XX Fire Rated Rim Devices SP28 557
Accessories
Model No. Description Finish List Price
050168 Keyed Removable Kit for existing 4023 Mullion SP28 485
050169 Keyed Removable Kit for existing F4023 Mullion SP28 534
REFERENCE NOTES:
1) Steel Mullions 4023 and F4023 now ship with a new design. Parts purchased prior to September 1, 2014 are not retrotable.
Parts
Model No. Description Finish List Price
050335 Top Fitting for 4023 Mullion SP28 69.00
050391 Top Fitting for F4023 Mullion SP28 177.00
050390 Bottom Fitting for 4023 and KR-4023 Mullion SP28 67.00
050392 Bottom Fitting for F4023 and KR-F4023 Mullion SP28 177.00
971212 KR-4023 Mullion Adjustment Shim Plate Non-nished 11.00
971313 KR-F4023 Mullion Adjustment Shim Plate SP28 43.00
971340 KR-4023 Mullion Top Fitting SP28 104.00
971312 KR-F4023 Mullion Top Fitting SP28 119.00
971328 KR-4023/KR-F4023 Mullion Cylinder Locking Washer Non-nished 17.00
050054 (KR)(F)4023 Mullion Stabilizers (set of 4, 2 attach to the mullion and 2 attach to the door) SP28 94.00
050526 KR-4023/KR-F4023 Mullion Cylinder Lock Nut Non-nished 13.00
900409 KR-4023 Mullion Mounting Package SP28 72.00
900410 KR-F4023 Mullion Mounting Package SP28 60.00
900411 KR-F4023 Bottom Fitting Screw Package Non-nished 24.00
900413 KR-F4023 Top Fitting Screw Package Non-nished 24.00
971187 KR Inner Mullion Back Cover Plate SP28 24.00
060104 Top Fittings for 2923 Mullion Non-nished 53.00
060105 Bottom Fittings for 2923 Mullion Non-nished 53.00
060107 Top Fittings for 4423 Mullion Non-nished 81.00
060108 Bottom Fittings for 4423 Non-nished 81.00
525 Aluminum Mullion Stabilizers (set of 2) US28 45.00
DC13/DC35 49.00
STK70 Adjustable Mortise Strikes (pair) for use with 2090 Device /RM70 Aluminum Mullion US32D 110.00
STK150 Adjustable Mortise Strikes (pair) for use with 1590 Device /RM150 Aluminum Mullion US32D 110.00
STK170 Adjustable Mortise Strikes (pair) for use with 1790 Device /RM170 Aluminum Mullion US32D 110.00
REFERENCE NOTES:
1) Steel Mullions 4023 and F4023 now ship with a new design. Parts listed above are not retrotable to mullions purchased prior to September 1, 2014.
Please consult factory for more information.
335
Prices subject to change without notice
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Sex BoltsAccessoriesEXITS
Exit Accessories
Sex Bolts
Model No. Description Screw
BRS
US10B
US26D
US3, US4
US10, SP313
US32, US32D
2729P Package of 1 - Includes Machine Screw 10-24 3/4" PPHMS 9 –
2729F Package of 1 - Includes Machine Screw 10-24 3/4" FPHMS 9 –
4122 Package of 1 - Includes Machine Screw 1/2-20 3/4" PPHMS 9 –
325 Package of 2 1/4-20 – 24
425 Package of 2 10-24 – 24
Delayed Egress System
Model No. Description List Price
DE5300 Logic Controller *15 Second Release Delay furnished standard 971
REFERENCE NOTES:
1) Designed to meet both life safety and security & NFPA 101 for "Special Locking Arrangement" and IBC "Special Egress-Control Devices"
2) Release delay over 15 seconds requires a letter of approval from Authority Having Local Jurisdiction.
Letter must accompany sales order at time of submission. Order cannot be processed without the letter.
3) A complete delayed egress system requires several components that must be ordered separately:
a. 24 / 25 Device containing a RX switch option
b. Power Supply PS902 minimum recommendation (See Power Supply section for more information)
c. Electronic Power Transfer (EPT) or Power Transfer Hinge
d. Magnetic Locks – Recommended Schlage electronics M420, M450 or M490 (See Schlage Electronics Security Price Book for more information.)
e. 1-1/4" Mortise Cylinder with Straight Cam installed with a compression ring
Shared Components
Shared components will receive the lower discount (ie components shared with Von Duprin will receive the Von Duprin discount instead of the Falcon discount).
Mullion
Part No. Description Finish Pkg Qty List Price
4270108954 RM170 Mullion Bracket Pkg - each 89
4270107489 RM150 Mullion Bracket Pkg - each 84
4270108999 Mullion Adapter Plate P28 - each 65
4270109000 Mullion Adapter Plate P13 - each 65
4270109001 Mullion Adapter Plate P35 - each 65
336
Prices subject to change without notice
Price Book 7
Effective May 4, 2019 • Rev. 05/19
EXITS
Numerical Index • Exits
Part No. Page Part No. Page Part No. Page Part No. Page
299.............. 203, 235
525 .............. 334
582.............. 302, 307
583.............. 302
584.............. 302, 304, 307, 310, 314
585.............. 302, 304
587 .............. 302, 307
591 .............. 302, 310
603.............. 198, 231
684 ............. 302, 305, 308, 315
685.............. 302, 305
687.............. 302, 308
691 .............. 302, 311
2130 ............. 207, 211, 243, 263, 309, 312
3518 . . . . . . . . . . . . . 196
3519 . . . . . . . . . . . . . 196
3530 ............ 196
3542 ............ 196
3566 ............ 302, 307, 308
3722............. 255
3740 ............ 302, 304, 305
3741 .............
302, 304, 305, 307, 308,
310, 311, 314, 315
3742............. 302, 307, 308, 310, 311
3746............. 302, 304, 305, 307, 308,
310, 311, 314, 315
3747............. 302, 304, 305, 307, 308,
310, 311, 314, 315
3749............. 302, 304, 305, 307, 308,
310, 311, 314, 315
3755............. 302, 306
3767............. 302, 304, 305, 307, 308,
310, 311, 314, 315
3770............. 302, 304, 305
3775 ............. 302, 307, 308
3777 ............. 198, 207, 303, 309
3788 ............ 207, 241, 263, 309
4067 ............ 196
4107 ............. 255, 259, 261
4108............. 255, 259, 261
4120............. 232
4121.............. 232
4122 ............. 259, 261, 313
4188............. 211, 243, 312
4208 ............ 200, 233
4270 ............ 232, 256
4286 ............ 255, 263
4288 ............ 255, 263
4349 ............ 232, 256
4400............ 303, 309
4450 ............ 231, 241
4567 ............ 198, 211, 231, 243, 303, 312
4694 ............ 198, 211, 231, 243, 303, 313
4832 ............ 198, 213, 245, 303, 313
4833 ............ 198, 213, 231, 245, 303, 313
4834 ............ 198, 213, 231, 245, 303, 313
4835 ............ 198, 213, 231, 245, 303
5494 ............ 198, 207, 211, 213, 231, 241,
243, 245, 255, 303
8500............ 215
050054 ......... 334
050335 ......... 334
050390 . . . . . . . . . 334
050391.......... 334
050392 ......... 334
050526 ......... 256, 334
050534 ......... 197, 230
060104 ......... 334
060105.......... 334
060107.......... 334
060108 ......... 334
060109 ......... 197, 200, 203, 205, 209,
210, 213, 215, 230, 233, 235,
237, 239, 242, 244, 255,
259, 261, 302, 304, 305,
307, 310, 314
060110 .......... 255, 259, 261
060111........... 197, 200, 207, 211, 213, 230,
233, 241, 243, 245, 263,
302, 309
060112 .......... 200, 233
060113 .......... 200, 233, 263
060114 .......... 200, 233, 263
060115 .......... 200, 233
060116 .......... 200, 233
060117........... 200, 233
060118 .......... 200, 233
060119 .......... 200, 233
060120.......... 200, 233
060121 .......... 200, 233, 303-305, 307,
308, 310, 311, 314, 315
060122.......... 200, 233
060123.......... 200, 233, 303, 312
060124.......... 200, 233
060125.......... 200, 233
060126.......... 200, 233
060136.......... 232
060137 . . . . . . . . . . 232
090041 ......... 199
090978 ......... 239
600078 . . . . . . . . . 313
600161 .......... 256
600166 ......... 256
600173 . . . . . . . . . . 200, 233
600272 ......... 199
600273 ......... 199
600274 ......... 199
600275 ......... 199
600276 ......... 199
600277.......... 199, 200, 233
600278 ......... 199, 200, 233
600279 ......... 199, 200, 233
600280......... 199
600281.......... 199
600282 ......... 199
600283 ......... 199, 200, 232, 233, 256
600284 ......... 199
600285 ......... 199
600286 ......... 199
600287 ......... 199
600288 ......... 199, 232
600289 ......... 199
600290......... 199
600293 ......... 199
600294 ......... 199
600295 ......... 199
600296 ......... 199
600297 ......... 199
600298 ......... 199, 232
600299 ......... 199, 232
600300......... 199, 232
600301.......... 199, 232
600305 . . . . . . . . . 197, 200, 203, 205, 209,
215, 230, 233, 235, 237,
239
600307 ......... 197, 200, 205, 209, 215,
230, 233, 237, 239
600307 ......... 203, 235
600308......... 197, 200, 205, 209, 215,
233
600309......... 197, 200, 205, 209, 233
600310.......... 197, 203, 205, 209, 215,
230, 235, 237, 239
600315.......... 256
600319.......... 197, 200, 203, 205, 209,
215, 230, 233, 235, 237,
239
600320 ......... 197, 230
600321.......... 197, 230
600335 ......... 196
600336 ......... 196
600337 ......... 199, 232
600339 ......... 232, 256
600346 ......... 256
610037 . . . . . . . . . . 303, 312
610042.......... 196
610044.......... 302, 304, 305, 307, 310,
314, 315
610045.......... 255, 263
610055.......... 198, 207, 303, 309
610056.......... 231, 241
610057 .......... 198, 211, 213, 231, 243, 245,
303, 312
610061 .......... 198, 211, 213, 231, 243, 245,
303, 312
610070.......... 302, 306
610480 ......... 197, 230, 255, 259, 261
640001 ......... 200, 233
640002......... 200, 233
650006......... 207, 241, 254, 263, 309,
312
650007 ......... 207, 241, 254, 263, 309,
312
650008......... 207, 241, 254, 263, 309,
312
650017 .......... 211, 213, 243, 245
650018.......... 211, 213, 243, 245
650019.......... 211, 213, 243, 245
650106.......... 196
650107 .......... 196
650108.......... 196
650113........... 302, 304
650116 .......... 230
650117........... 230
650119 .......... 197
650120.......... 197
650121........... 230, 235, 237, 239
650122 .......... 230, 235, 237, 239
650131........... 230
650132 .......... 230
650133 .......... 302, 305
650134 .......... 302, 308
650135 . . . . . . . . . . 197
650136.......... 197
650137 .......... 302, 314
650138.......... 302, 315
650139.......... 230
650140.......... 230
650141 .......... 302
650142.......... 302
650143 .......... 197
650144.......... 197
650145.......... 302, 314
650146.......... 302, 314
650147 .......... 195
650148.......... 195
650149.......... 302, 315
650150.......... 302, 315
650151........... 232
650152 . . . . . . . . . . 232
650153 . . . . . . . . . . 232
650154.......... 232
650157 .......... 232
650158.......... 232
650161 .......... 232
650162.......... 232
650165.......... 232
650166.......... 232
650167 .......... 195
650168.......... 195
650169.......... 232
650170 .......... 232
650173 .......... 232
650174 .......... 232
650177 .......... 232
650178 .......... 232
650181 .......... 232
650182.......... 232
650185.......... 232
650186.......... 232
650187 .......... 230, 235, 237, 239
650188.......... 230, 235, 237, 239
650189.......... 232
650190.......... 232
650191 .......... 197, 203, 205, 209, 215
650192.......... 197, 203, 205, 209, 215
650201.......... 230, 237, 241
650202 ......... 198, 207, 231, 241, 303,
309
650210.......... 197, 230
650227.......... 197, 203, 205, 209, 215
650228 ......... 197, 203, 205, 209, 215
650231 .......... 199, 200, 233
650232.......... 199
650234 ......... 230
650234 ......... 235
650235 ......... 199
650236 ......... 230, 237
650237.......... 199
650238 ......... 230, 239
650239 ......... 197, 203
650240 ......... 197, 203
650242 ......... 197, 205
650244 ......... 197, 209
650246 ......... 197, 215
650247.......... 230, 235
650249 ......... 230, 235
650251 . . . . . . . . . . 230, 237
650253 ......... 230, 239
650255 ......... 197, 203
650257.......... 197, 205
650259 ......... 197, 209, 215
650261.......... 197, 205, 209, 215
650262 ......... 197, 205
650263 ......... 197, 209, 303, 310, 311
650264 ......... 197, 230
650265 ......... 197, 230
650266 ......... 196
650267.......... 199, 200, 233
650277.......... 200, 233
650278 ......... 199
650293 ......... 197, 203, 215
650294 ......... 197, 200, 203, 204, 209,
214, 230, 233, 235, 237,
239
650295 ......... 197, 205, 207
650296 ......... 197, 211, 213
650297.......... 255, 259, 261
650298 ......... 230, 245
650299 ......... 197, 211, 213, 302
650300 . . . . . . . . . 197, 211, 230, 243
650301.......... 302
650302 ......... 230, 235
650303 ......... 255, 259, 261
650304 ......... 230, 237, 241
650307 ......... 255, 259
650308 ......... 255, 261
650309 ......... 255, 261
650311........... 198, 200, 207, 231, 233,
241, 303, 309
650312 .......... 232
650313 .......... 232
650314 .......... 232, 256
650315 . . . . . . . . . . 197, 205, 207
650316.......... 197, 205, 207
650317 .......... 197, 210, 230, 242, 302, 311
650318.......... 197, 211, 230, 243, 302, 310
650320 ......... 255, 259, 261
650323.......... 302
650324 ......... 230, 235
650325 ......... 230, 237, 241
650326 ......... 230, 244, 245
650327.......... 230, 232, 243, 245
650328 ......... 255, 259
650329 ......... 255, 259
650330 ......... 255, 261
650331 .......... 255, 261
650332.......... 302, 307
650333.......... 302
650334 ......... 255
650336 ......... 198, 207, 231, 241, 303,
304, 309, 314, 315
650337.......... 255, 263
650338 ......... 255
650339 ......... 198, 211, 213, 231, 243, 245,
303, 312
337
Prices subject to change without notice
Price Book 7
Effective May 4, 2019 • Rev. 05/19
EXITS
Exits • Numerical Index
Part No. Page Part No. Page Part No. Page Part No. Page
650343 ......... 255, 259, 261
650345 ......... 197, 203, 215
650346 ......... 197, 211, 230, 243
650348 ......... 197, 203, 204, 209, 215,
230, 235, 237, 239
650351 . . . . . . . . . . 231, 243, 245
650355 ......... 256
650356 ......... 256
650358 ......... 256
650359 ......... 195, 197, 230
650360 ......... 255, 259, 261
650361.......... 255, 259, 261
650366 ......... 232
650371 .......... 256
650374.......... 255, 259
650375.......... 198, 207, 231, 241, 255,
303, 309
650376.......... 198, 211, 213
650377.......... 197, 215
650378 ......... 197, 215
650381.......... 302
650382 ......... 302
650384 ......... 255, 259
650385 ......... 255, 261
650386 ......... 255, 263
650387 ......... 198, 207, 231, 241, 255,
263, 303, 309
650388 ......... 255, 263
650389 ......... 198, 207, 231, 241, 255,
263, 303, 309
650390 ......... 255, 261
650391.......... 255, 261
650392 ......... 255, 261
650393 ......... 255, 261
650398 ......... 197, 215
660002......... 198, 207, 231, 241, 255,
263, 303, 309, 312, 313
660004......... 303, 309
660025 ......... 302, 304, 305, 307, 308,
310, 311, 314, 315
660078 ......... 309, 312
660078 ......... 303
660136.......... 255
660429 ......... 313
660429 ......... 303
660439 ......... 303, 307, 308
661180 .......... 302, 306
661182........... 303, 306-308
661408.......... 230, 235, 237, 239
661409.......... 230, 235, 237, 239
661412........... 197, 203, 205, 209, 215
661413........... 197, 203, 205, 209, 215
661472 .......... 196
661473 .......... 196
661560.......... 232
661565 .......... 256
900409......... 334
900410 ......... 334
900411 .......... 334
900413.......... 334
970321 .......... 200, 233
971187 ........... 334
971212 ........... 334
971312 ........... 334
971313 ........... 334
971328 .......... 334
971340 .......... 334
3894-000 ...... 200, 233
050534-00 ..... 274, 281, 285, 331
090978-00..... 230
110388-00 ...... 274, 281, 285, 331
963100-00 ..... 321
963128-00...... 321
969467-89 ..... 285
971493-76....... 280, 285, 331
971585-89 ...... 333
971659-79 ...... 272
971660-79 ...... 272
971687-00 ...... 281, 285, 331
971974-00 ...... 333
4270902121..... 321
4230100017..... 321
4270100013..... 319, 321
4270100017..... 280, 319, 331
4270100018 .... 280, 319
4270100026 .... 321
4270100075 .... 321
4270100110 ..... 321
4270100116 ..... 321
4270100130..... 321
4270100152..... 321
4270100153..... 321
4270100172 ..... 280, 319
4270100197 ..... 280, 319
4270100266 .... 280, 319
4270100299 .... 321
4270100304 . . . . 325
4270100312 ..... 319, 325
4270100346 .... 280, 319, 331
4270100521..... 275, 280, 319, 331
4270100522 .... 280, 319
4270100582 .... 321
4270100583 .... 321
4270100663 .... 321
4270101482..... 280, 319, 331
4270101753 ..... 321
4270101778 ..... 321
4270101782 ..... 321
4270101806..... 275, 280, 319, 331
4270101818 ..... 280, 319
4270101819 ..... 280, 319
4270101825 ..... 280, 319
4270101830..... 275, 319
4270101831...... 319
4270101840..... 325
4270101873 ..... 280, 319
4270101874 ..... 280, 319
4270102426 .... 280, 319
4270102427..... 280, 319
4270103324..... 331
4270105926 .... 275
4270106349 .... 321
4270106632 .... 280, 319
4270106633 .... 280, 319
4270106745 .... 272
4270106769 .... 272
4270106770..... 269
4270106772..... 272
4270106773..... 272, 274
4270106775..... 275
4270106776..... 275
4270106782 .... 275
4270106786 .... 269
4270106787..... 269
4270106796 .... 275
4270106863 .... 269
4270106875 .... 269
4270106888 .... 272
4270106977..... 272
4270106997 .... 321
4270107027..... 270
4270107028 .... 270
4270107029 .... 270
4270107031 ..... 270
4270107032..... 270
4270107033..... 270
4270107034 .... 270
4270107035..... 270
4270107036 .... 270
4270107038 .... 270
4270107039 .... 270
4270107040 .... 270
4270107046 .... 272
4270107047..... 272
4270107048 .... 272
4270107060 .... 272
4270107061 ..... 272
4270107089 .... 272
4270107090 .... 272
4270107091 ..... 270
4270107092 .... 270
4270107093 .... 270
4270107095 .... 270
4270107096 .... 270
4270107097..... 270
4270107176 ..... 280, 319, 331
4270107178 ..... 280, 319, 331
4270107186 . . . . . 274
4270107188 . . . . . 274
4270107189 . . . . . 274
4270107192 ..... 274
4270107193 ..... 274
4270107194 ..... 274
4270107213 ..... 276
4270107214 ..... 276
4270107215 ..... 276
4270107268 .... 276
4270107270..... 276
4270107283..... 276
4270107285..... 276
4270107286 .... 276
4270107320..... 269
4270107321 ..... 269
4270107322..... 269, 318
4270107323..... 269
4270107341 ..... 274
4270107342..... 274
4270107360 .... 274
4270107361 ..... 274
4270107363..... 274
4270107422..... 272
4270107429..... 274
4270107430 .... 274
4270107489 .... 335
4270107495 .... 275
4270107497..... 275
4270107520..... 272
4270107521 ..... 272
4270107587..... 270
4270107588 .... 270
4270107589 .... 270
4270107591 ..... 270
4270107592..... 270
4270107593..... 270
4270107603 .... 272
4270107623..... 274
4270107685 .... 270
4270107686 .... 270
4270107687..... 270
4270107688 .... 270
4270107689 .... 270
4270107691 ..... 270
4270107703..... 270
4270107704..... 270
4270107705..... 270
4270107706..... 270
4270107707..... 270
4270107709..... 270
4270107712...... 270
4270107713...... 270
4270107714 ..... 270
4270107715 ..... 270
4270107716 ..... 270
4270107718 ..... 270
4270107787 . . . . . 276
4270107791 ..... 275
4270107833..... 276
4270108353 .... 321
4270108426 .... 275
4270108763 .... 274
4270108954 .... 335
4270108999 .... 335
4270109000.... 335
4270109001 .... 335
4270109003 .... 275
4270109005 .... 276
4270109006.... 276
4270109007 .... 276
4270109009.... 276
4270109077..... 275
4270109078 .... 275
4270109142..... 274
4270109190..... 276
4270109548 .... 285
4270109630 .... 276
4270900091.... 320, 327
4270900094 ... 320, 327
4270900095 ... 320, 327
4270902091 .... 321
4270902095 ... 321
4270902125 .... 321
4270902740.... 327
4270902742 . . . . 327
4270902743 . . . . 327
4270902746.... 327
4270902748.... 327
4270902749.... 327
4270902763 .... 326
4270902766.... 326
4270902767 .... 326
4270902769.... 326
4270902772 .... 326
4270902773 .... 326
4270902776 .... 320, 326
4270902778 .... 320, 326
4270902779 .... 320, 321, 326
4270902782 .... 320, 326
4270902784.... 320, 326
4270902785.... 320, 326
4270902787 .... 320
4270902789.... 320
4270902790.... 320
4270902799.... 320, 326
4270902802.... 320, 326
4270902803.... 320, 326
4270902805 ... 320, 326
4270902808 ... 320, 326
4270902809 ... 320, 326
4270902968 ... 325
4270902974.... 325
4270903177..... 279, 318, 321, 325
4299100213..... 321
4299100997 .... 321
4299101020 .... 272
169CA ........... 281
179CA ........... 285
603L ............ 211, 243, 303, 313
603R . . . . . . . . . . . . 211, 243, 303, 313
325 SNB......... 200, 233
425 SNB......... 200, 233
299 Strike....... 200, 233
AXLE.1006 ...... 331
AXLE.1007 ...... 272
BASEASY.208 .. 274
BASEASY.209 .. 274
BASEASY.210 ... 274
BASEASY.211.... 274
BASEASY.220... 274
BASEASY.221 ... 274
BOLT.1004...... 280, 331
BRKT.128........ 280, 285
BRKT.137 ........ 331
BRKT.138........ 279
BRKT.143........ 331
BRKT.152........ 333
BRKT.156........ 281
BRKT.478 ....... 279
BRKTASY.101 ... 280, 319
BRKTASY.107 ... 280, 331
BRKTASY.118 ... 333
BRKTASY.155 ... 333
BUMPER.103.... 269
BUSH.102 ....... 279, 318, 325
BUSH.103 ....... 319, 325
BUSH.107 ....... 275
BUSH.108 ....... 321
338
Prices subject to change without notice
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Numerical Index • Exits
EXITS
BUSH.109 ....... 279, 318, 331
CAM.102......... 279, 318, 325
CAMASY.101..... 285
CASE.222........ 320, 326
CASE.223 ....... 320, 326
CASE.229 ....... 327
CASE.243 ....... 327
CBAR.101 ........ 320, 327
CBAR.116 ........ 320, 327
CBAR.135........ 320, 327
CHASY.107 ...... 332
CHASY.108...... 332
CHASY.109...... 332
CHASY.125 ...... 332
CHASY.147 ...... 332
CHASY.158 . . . . . . 332
CHASY.160...... 332
CHASY.207...... 332
COVER.113....... 279
COVER.120 . . . . . . 285
COVER.127 ...... 331
CTUBE.232...... 276
ECAP.103........ 270
ECAP.111 ......... 270
ECAP.129........ 280, 285
ECAP.130........ 279, 285
ECAP.143........ 331
EXT.255......... 270
EXT.256......... 270
EXT.257 ......... 270
EXT.258......... 270
EXT.259......... 270
EXT.261 ......... 270
EXT.440 ........ 332
EXT.445......... 332
EXT.450......... 332
EXT.2244 ....... 332
EXT.2927........ 332
EXT.2949 ....... 332
EXT.2950 ....... 332
EXT.2951 ........ 332
EXT.3000....... 332
EXT.3001........ 332
EXT.3002 ....... 332
EXT.3003 ....... 332
EXT.3004 ....... 332
EXT.3005 ....... 332
EXT.3006 ....... 332
EXT.3007 ....... 332
EXT.3008 ....... 332
EXT.3009 ....... 332
EXT.3010........ 332
EXT.3011 ........ 332
EXT.3012 ........ 332
EXT.3013 ........ 332
EXT.3014........ 332
EXT.3015........ 332
EXT.3050 ....... 332
EXT.3051........ 332
EXT.3052 ....... 332
EXT.3053 ....... 332
EXT.3054 ....... 332
EXT.3055 ....... 332
EXT.3056 ....... 332
EXT.3057........ 332
EXTROD.1001 ... 331
F570............. 259, 304, 305
F582 ............ 302, 308
F583 ............ 302, 308
F603 ............ 198, 211, 213, 231, 243, 303,
313
GUIDE.101 ....... 275
GUIDE.102....... 275
HOUSING.123 ... 333
HOUSING.124 ... 333
HOUSING.125 ... 333
HOUSING.231 ... 320
KEY.101.......... 319, 325
KEY.102 ......... 269
KEY.10020 . . . . . . 272, 279, 285, 331
KIT.1008 ........ 274
KIT.1009 ........ 274
KIT.1010 . . . . . . . . . 274
KIT.1011.......... 274
KIT.1012 ......... 274
KIT.1013 ......... 274
KIT.1128 ......... 331
KIT.1156 ......... 281
KIT.1157.......... 281
KIT.1197.......... 280, 285, 331
LARM.180 . . . . . . . 326
LARM.180 ...... 320
LARM.188 ....... 326
LARM.188 ....... 320
LARM.205....... 326
LARM.216 ....... 326
LATCHR.102..... 274
LBOLT.105 ...... 285
LEVER.103 ...... 274
LEVER.104 ...... 274
LEVER.105 ...... 274
NUT.101 ......... 275, 280, 319, 331
NUT.103......... 274
PIN.104.......... 319, 325
PIN.109.......... 280, 319, 331
PIN.110 .......... 280, 319, 331
PIN.115........... 318, 325
PIN.116........... 325
PIN.128 .......... 280, 285, 331
PKG.102 ......... 270
PKG.104......... 270
PKG.105 ......... 270
PKG.133 ......... 285
PKG.134 ......... 331
PKG.135 ......... 331
PKG.150 ......... 279
PKG.151.......... 279
PLUNGER.101 ... 274, 281, 285, 331
RETAIN.101...... 319
RETAIN.102 ..... 319, 325
RETRACT.101.... 279, 319
RETRACT.102 ... 325
RING.108 ........ 321
ROD.1011......... 331
ROD.1036 ....... 331
ROD.1043 ....... 331
ROD.1044 ....... 331
ROD.1080 . . . . . . . 331
ROD.1082 ....... 331
RODASY.110..... 275
RODASY.112 ..... 275
RODASY.1075 ... 280
RODASY.10001 . 332
RODASY.10002 .332
RODASY.10003 .332
RODASY.10004.332
RODASY.10005.332
RODASY.10006.332
RODASY.10007 . 332
RODASY.10008.332
RODASY.10009.332
RODASY.10010 . 332
RODASY.10011 .. 332
RODASY.10012.. 332
RODASY.10013.. 332
RODASY.10014.. 332
RRING.102....... 325
RRING.103....... 275, 319, 325
RRING.104....... 272, 274
RRING.105....... 272, 274, 285
RRING.109....... 279, 318, 331
SCREW.1012..... 269
SCREW.1015..... 318, 325
SCREW.1022 .... 318, 325
SCREW.1025 .... 280, 285
SCREW.1027 .... 318, 325
SCREW.1028 .... 269, 275, 279, 318, 331
SCREW.1029 .... 275, 279, 318, 331
SCREW.1030.... 319, 325
SCREW.1031..... 325
SCREW.1032 .... 333
SCREW.1037 .... 280, 319
SCREW.1038 .... 333
SCREW.1039 .... 319, 325
SCREW.1043 . . . . 272
SCREW.1050.... 269
SCREW.1053 .... 269
SCREW.1055 .... 269
SCREW.1061 .... 274
SCREW.1063 .... 274
SCREW.1065.... 274
SCREW.1066.... 269
SCREW.1067 .... 280
SCREW.1068.... 280
SCREW.1069.... 279
SCREW.1070 .... 280, 285
SCREW.1072 .... 280
SCREW.1072 .... 285
SCREW.1074 .... 279
SCREW.1075 .... 285
SCREW.1076 .... 280, 319, 331
SCREW.1077 .... 280
SCREW.1077 .... 285, 331
SCREW.1081 .... 280, 319, 331
SCREW.1082 .... 333
SCREW.1083 .... 333
SCREW.1084.... 333
SCREW.1085.... 333
SCREW.1088.... 331
SCREW.1099.... 276
SCREW.1105..... 276
SCREW.1114 ..... 281, 331
SCREW.1121 ..... 281, 285, 331
SCREW.1136..... 272, 274
SCREW.1141 ..... 280, 285, 331
SCREW.1143..... 269, 280, 285
SCREW.1150..... 285
SCREW.1282 .... 269
SHIM.112......... 333
SLIDER.101 ...... 285
SOLENOID.142 .. 274
SPACER.107..... 285
SPRING.103 ..... 319, 325
SPRING.104 ..... 325
SPRING.105 ..... 276
STK70........... 334
STK150.......... 334
STK170.......... 334
STUD.101 ........ 318, 325
SWITCH.1002 ... 274
SWITCH.1004... 274
SWITCH.1006... 281, 285, 331
WASHER.102.... 272, 274
WASHER.103.... 272, 274
WASHER.107.... 272
WASHER.108 ... 276
WASHER.109 ... 276
WASHER.110 .... 276
WASHER.116 .... 275
WASHER.120.... 333
WASHER.121 .... 333
WF603.......... 198, 213, 231, 245
WRENCH.101 . . . . 319, 325
Part No. Page Part No. Page Part No. Page Part No. Page
General Closer Information ...................................339
Finishes.........................................................339
Common Applications........................................ 340
Surface Mount
SC Series Options Overview ......................................341
SC60/SC60A Series (Light-Medium Duty)........................342
SC60/SC60A Options and Parts .................................342
SC70/SC70A Series (Heavy Duty) ................................343
SC70/SC70A Options and Parts..................................343
SC80/SC80A Series (Medium Duty)............................. 344
SC80/SC80A Options and Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 344
SC90/SC90A Series (Light/Residential Duty) ....................345
SC90/SC90A Options and Parts .................................345
Concealed
OHC100A Series................................................. 346
OHC100A Options and Parts .................................... 346
Auto Operator
8200 Series......................................................347
8200 Options and Parts .........................................347
8300 Series Actuators & Accessories ............................ 348
339
Prices subject to change without notice
Price Book 7
Effective May 4, 2019 • Rev. 05/19
CLOSERS
Table of Contents
Surface Mount SC Series
Certifications and Listings
1. SC60/SC60A, SC70/SC70A and SC80/SC80A Series Closers are
certified to meet the requirements of ANSI Standard A156.4,
Grade 1.
2. SC90/SC90A Series Closers are certified to meet the requirements
of ANSI Standard A156.4, Grade 3.
3. SC60/SC60A, SC70/SC70A, SC80/SC80A, and SC90 Series Closers
without hold-open arms are UL10C fire rated.
4. SC61/SC61A, SC71/SC71A, SC81/SC81A, and SC91 Series are
designed to meet the American Disabilities Act (ADA) and ANSI
A117.1.
5. SC93 (spring size 3) and SC94 (spring size 4) Series do not meet
ADA force requirements.
Covers and Hardware:
1. SC80/SC80A Series Closers ship with a standard SLIM cover unless
an optional FULL (FC) cover is added to the order line.
2. SC60/SC60A Series Closers ship as LESS cover unless an optional
SLIM cover is added to the order line.
3. SC90/SC90A Series Closers ship LESS cover unless an option SLIM
cover is added to order line.
4. All SC 60/70/80/90 Series Closers are furnished with a TBWMS
fastener pack. ALL SC60A/70A/80A/93A/94A closer series are
furnished with TBWMS and Self-Reaming and Tapping Screws.
Master Cartons
1. All SC60, SC80 and SC90 Series Closers are packed with six (6)
identical closers per master carton. SC60A and SC80A RWPA are
packed with six (6) identical closers per master carton. SC60A and
SC80A HWPA, DS, DSHO, HD, SS, and SSHO arms are packed 4 per
master carton.
2. SC70/SC70A Series Closers are packed with four (4) identical
closers per master carton.
Overhead Concealed OHC100A Series
Certifications and Listings
1. OHC100A and OHC101A Series Closers without hold-open option
are listed to UL228.
2. OHC101A Series Closers are designed to meet the American
Disabilities Act (ADA) and ANSI A117.1.
3. OHC100A Series Closers (spring size 3-5) do not meet ADA force
requirements.
Device Options
1. OHC100A and OHC101A Series Closers are available with 90° or
105° of door swing cylinders.
2. OHC100A and OHC101A Series Closers utilize a 'Hold-Open' feature
within the cylinder assembly.
3. ‘A’ Style arm is an End Load(EL) arm
4. ‘S’ Style arm is a Side load(SL) arm
5. ‘VO’ Style is used on doors hung with offset pivots or butt hinges.
6. OHC100A and OHC101A cylinders come standard with DKBRZ
finish and components come with AL finish.
Competitive Retrofit
OHC100A Series are a retrofit for the following models; Norton 4900,
Jackson 20-330, Global TC7000, International 100 or 200 and the
Kawneer Husky II.
Closer Finishes
Finish Code BHMA Finish Color Description
MTBK 622 Matte Black
AL 689 Silver Painted (Resembles Aluminum Finish)
DKB 695 Dark Bronze Painted (Spray Duranodic)
BR 696 Brass Painted
REFERENCE NOTES:
1) OHC100 and OHC101 cylinder and components only available in DKBRZ. VO style arm available in AL or DKBRZ nish.
2) 8200 Series Auto Operator only available in AL.
3) Matte Black nish will not transition to SC60A, SC70A, and SC80A until Q3 2017.
General Closer Information
340
Prices subject to change without notice
Price Book 7
Effective May 4, 2019 • Rev. 05/19
CLOSERS
Common Applications
Series Duty Applications
SC70/SC70A
Series
Heavy Commercial / Exterior Door
Commercial / Interior Door
Aluminum Store Front
SC80/SC80A
Series
Medium Commercial / Exterior Door
Commercial / Interior Door
Aluminum Store Front
SC60/SC60A
Series
Light-Medium Commercial / Exterior Door
Commercial / Interior Door
Aluminum Store Front
SC90/SC90A
Series
Light Commercial / Interior Door
Aluminum Store Front
OH100A Series Medium Aluminum Store Front
Retail
341
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Prices subject to change without notice
SC60/SC60A
Surface Mount /
Mechanical
CLOSERS
RwPA HwPA HDPA FA FAHO
DS DSHO SS SSHO
Options Surface Closer (SC)
Cylinder Options
n STD – Standard Cylinder. Cylinder will provide consistent door control
throughout the opening & closing cycle. Independent backcheck,
main speed and latch speed are field adjustable regulation valves and
incorporated into the cylinder.
n DEL – Delay Action Cylinder. Cylinder will provide consistent door control
throughout the opening & closing cycle but includes an extra regulation
valve that allows the door to slowly close (delay) as it begins to sends
the door back to latch (approximately 70°). Independent backcheck,
main speed and latch speed are field adjustable regulation valves and
incorporated into the cylinder.
Cover Options
n STD – Standard Cover. Cover will enclose the cylinder body with the
exception of the unused pinion shaft. A shaft cover will be included to cover
the unused pinion shaft.
n SLIM – Slim Cover. Cover will enclose the cylinder body with the exception
of the unused pinion shaft. A shaft cover will be included to cover the
unused pinion shaft.
n FULL – Full Cover. Cover will enclose the entire cylinder body, including the
unused pinion shaft.
Arm Options
n Rw/PA – Regular Arm with Parallel Arm Bracket. Includes adjustable
forearm assembly to accommodate a variety of door types and frame
conditions. Parallel Arm (PA) bracket allows closer to be installed on the
‘push’ side of the door in a parallel arm type configuration.
n Hw/PA – Hold Open Arm with Parallel Arm Bracket. Includes
adjustable forearm assembly to accommodate a variety of door types and
frame conditions. Parallel Arm (PA) bracket allows closer to be installed on
the ‘push’ side of the door in a parallel arm type configuration. Hold open
function adjustable at the arm shoe.
n HD/PA – Heavy Duty Arm with Parallel Arm Bracket. Includes a
stamped steel main arm and forearm for added durability in potentially
high traffic and/or abusive applications. Parallel Arm (PA) bracket is a
permanent feature, installation on ‘push’ side of the door in a parallel arm
type configuration
is required.
n FA – Forged Arm. Extra heavy duty arm with parallel arm bracket.
Includes a forged steel main arm and forearm for maximum durability in
high traffic and/or abusive applications. Parallel Arm (PA) bracket is a
permanent feature, installation on ‘push’ side of the door in a parallel arm
type configuration is required.
n FA/HO – Forged Arm with Hold Open. Extra heavy duty arm with parallel
arm bracket that incorporates a hold open feature. Includes a forged steel
main arm and forearm for maximum durability in high traffic and/or abusive
applications. Parallel Arm (PA) bracket is a permanent feature, installation
on ‘push’ side of the door in a parallel arm type configuration is required.
n DS – Dead Stop Arm. Heavy duty arm with parallel arm bracket that
incorporates a positive mechanical stop. Includes a stamped steel main
arm and forearm for added durability in potentially high traffic and or
abusive applications. Parallel Arm (PA) bracket is a permanent feature,
installation on ‘push’ side of the door in a parallel arm type configuration is
required.
n DS/HO – Dead Stop Arm with Hold Open. Heavy duty arm with parallel
arm bracket that incorporates a positive mechanical stop and hold
open feature.Includes a stamped steel main arm and forearm for added
durability in potentially high traffic and or abusive applications. Parallel
Arm (PA) bracket is a permanent feature, installation on ‘push’ side of the
door in a parallel arm type configuration is required. Hold open function is
manually selected with a ‘thumb turn’ feature built into the main portion
of the arm.
n SS – Spring-n-Stop Arm. Extra heavy duty arm with parallel arm bracket
that incorporates an integral spring stop. Includes a forged steel main
arm and forearm for maximum durability in high traffic and/or abusive
applications. Parallel Arm (PA) bracket is a permanent feature, installation
on ‘push’ side of the door in a parallel arm type configuration is required.
n SS/HO – Spring-n-Stop Arm with Hold Open. Extra heavy duty arm
with parallel arm bracket that incorporates an integral spring stop and hold
open feature. Includes a forged steel main arm and forearm for maximum
durability in high traffic and/or abusive applications. Parallel Arm (PA)
bracket is a permanent feature, installation on ‘push’ side of the door in a
parallel arm type configuration is required.
Fastener Pack Option
n TBWMS – Through Bolt, Wood & Machine Screws. Fasteners for installation
on wood, hollow metal or aluminum store front type doors. Through bolts
for installations on 1¾” thick, hollow core doors are included. SC60A/SC70A/
SC80A/SC93A/SC94A faster pack will contain TBWMS and Self-Reaming
and Tapping Screws
ADA Accessibility Requirements
n Product Information – Closers are preset for standard spring power or can be
adjusted in the field to generate the 5lbs. of opening force (36” wide, interior
door) requirements for ADA (Sections 4.13.10 and/or 4.13.11) and the ANSI
Standard A117.1 (Sections 4.13.10 and/or 4.13.11).
n Product Information – Closers installed with the delay (DEL) cylinder option
will also comply with the additional advisory suggestions for ADA (Section
4.13.10) and ANSI A117.1 (Section 4.13.10).
Falcon has several options to meet your unique application and/or installation needs. See the options section on each series page in the Falcon Closer price list for
available options by series. Please contact Falcon Closer Customer Care at (877) 671-7011 for additional information. As always, we appreciate your business!
342
Prices subject to change without notice
SC60 Surface Mount /
Mechanical CLOSERS
Price Book 7
Effective May 4, 2019 • Rev. 05/19
SC60/SC60A Series Closers
SC60/SC60A Series
Light-Medium Duty
Model Arm Type Shipping Weight
AL (689)
DKB (695)
BR (696)
MTBK (622)1
SC61/SC61A RwPA 7 166
SC61/SC61A HwPA 7 189
SC61/SC61A HDPA17189
SC61/SC61A DS 9 209
SC61/SC61A DSHO19 232
SC61/SC61A SS19276
SC61/SC61A SSHO19294
REFERENCE NOTES:
1) SC61 HD, DS/HO, SS, and SS/HO are not available in matte black. All other matte black will transition to SC60A in Q3 of 2017.
2) SC61/SC61A ships standard as LESS cover.
3) SC61/SC61A is fully adjustable 1-5
Closer Parts and Accessories
Model Description
Shipping
Weight List
SC61/SC61A-3071 Standard Cylinder 9 103
SC61-3071DEL Delay Cylinder19137
SC60/SC60A-72 Slim Cover 1 15
SC60/SC60A-3077/PA Regular Arm w/ PA Bracket 3 64
SC60/SC60A-3049/PA Hold Open Arm w/ PA Bracket 3 87
SC60/SC60A-3077HD Heavy Duty Parallel Arm1387
SC60/SC60A-3077DS Dead Stop Parallel Arm 5 106
SC60/SC60A-3049DS Hold Open Dead Stop Parallel Arm15129
SC60/SC60A-3077SS Spring N Stop Arm15173
SC60/SC60A-3049SS Hold Open Spring N Stop Arm15192
SC60/SC60A-18 Mounting Plate - Top Jamb 2 33
SC60/SC60A-18PA Mounting Plate - Push Side 2 33
SC60/SC60A-30 Cush Shoe Support 1 21
SC60/SC60A-61 Blade Stop Spacer 1 24
SC60/SC60A-62A Offset Auxiliary Shoe 1 28
043156626427 SC60A Standard Screw Pack AL Finish replacing 42824 10
043156626465 SC60A Standard Screw Pack DKB Finish replacing 42833 10
043156626441 SC60A Standard Screw Pack BR Finish replacing 42840 10
043156626434 SC60A/80A Screw Pack for Afxed Parallel Arm Shoe (AL)
- in addition to 043156626427
10
043156626472 SC60A/80A Screw Pack for Afxed Parallel Arm Shoe (DKB)
- in addition to 043156626465
10
043156626458 SC60A/80A Screw Pack for Afxed Parallel Arm Shoe (BR)
- in addition to 043156626441
10
043156618422 SC60A/80A PINION CAP (AL) 6
043156618446 SC60A/80A PINION CAP (DKB) 6
043156618439 SC60A/80A PINION CAP (BR) 6
43924 SC60/80/90 PINION CAP (MTBK) 6
REFERENCE NOTES:
1) SC61 delay action, HD, DS/HO, SS, and SS/HO arms are not available in matte black.
2) Delay Action will transition to SC61A end of 2017.
3) Matte Black nish will transition to SC61A in Q3 2017.
4) Matte Black and Dark Bronze Closers share the same screw nish.
Closer Options
Sufx Description List Adder
SLIM SLIM Cover 15
SC60/60A Series
SC60A-18
SC70-62A
SC60A-18PA
SC60A-62A
343
Prices subject to change without notice
Price Book 7
Effective May 4, 2019 • Rev. 05/19
SC70/SC70A
Surface Mount /
Mechanical
CLOSERS
SC70PA-18
Closers SC70/SC70A Series
SC70/SC70A Series
Heavy Duty
Model Arm Type Shipping Weight
AL (689)
DKB (695)
BR(696)
MTBK (622)1
SC71/SC71A RwPA 10 306
SC71/SC71A HwPA 10 327
SC71/SC71A HDPA 11 327
SC71/SC71A FA111 343
SC71/SC71A FAHO111 365
SC71/SC71A DS 11 345
SC71/SC71A DSHO112 367
SC71/SC71A SS112 408
SC71/SC71A SSHO112 425
REFERENCE NOTES:
1) SC71 FA, FA/HO, DS/HO, SS, and SS/HO are not available in matte black. All other matte black will transition to SC71A in Q3 2017.
2) SC71 ships standard with a FULL Cover.
3) SC71 is fully adjustable 1-6
Closer Parts and Accessories
Model Description Shipping Weight List
SC71/SC71A-3071 Standard Cylinder 12 230
SC71/SC71A-3071DEL Delay Cylinder112 262
SC70/SC70A-72 FULL Cover 1 16
SC70/SC70A-3077/PA Regular Arm w/ PA Bracket 3 60
SC70/SC70A-3049/PA Hold Open Arm w/ PA Bracket 3 81
SC70/SC70A-3077HD Heavy Duty Parallel Arm 3 81
SC70/SC70A-3077FA Forged Parallel Arm1397
SC70/SC70A-3049FA Hold Open Forged Parallel Arm13 119
SC70/SC70A-3077DS Dead Stop Parallel Arm 5 99
SC70/SC70A-3049DS Hold Open Dead Stop Parallel Arm15121
SC70/SC70A-3077SS Spring N Stop Arm15162
SC70/SC70A-3049SS Hold Open Spring N Stop Arm15179
SC70/SC70A-18 Narrow Frame Back Plate 3 52
SC70/SC70A-18PA Narrow Top Rail Drop Plate 4 52
SC70/SC70A-30 Cush Shoe Support 1 20
SC70/SC70A-61 Blade Stop Spacer 1 22
SC70/SC70A-62A Offset Auxiliary Shoe 1 26
42992 SC70 Screw Pack RW/PA and HW/PA Arms (AL) 10
43096 SC70 Screw Pack RW/PA and HW/PA Arms (DRKB) 10
43097 SC70 Screw Pack RW/PA and HW/PA Arms (BR) 10
43065 SC70 Screw Pack for Afxed Parallel Arm Shoe (AL) 10
43100 SC70 Screw Pack for Afxed Parallel Arm Shoe (DRK) 10
43101 SC70 Screw Pack for Afxed Parallel Arm Shoe (BR) 10
REFERENCE NOTE:
1) SC71/SC71A FA, FA/HO, DS/HO, SS, and SS/HO arms are not available in matte black.
2) Matte Black will transition to SC71A in Q3 2017.
3) Delay Action will transition to SC71A by end of 2017.
4) Matte Black and Dark Bronze Closers share the same screw nish.
Closer Options
Sufx Description List Adder
DEL1Delayed Action Cylinder 30
REFERENCE NOTE:
1) Delay Action is not available in matte black and will transition to SC71A end of 2017
SC70/SC70A Series
SC70-62A
SC70/SC70A-18PA
SC70/SC70A-18
SC70-18
SC70/SC70A-62A
344
Prices subject to change without notice
Price Book 7
Effective May 4, 2019 • Rev. 05/19
SC80 Surface Mount /
Mechanical CLOSERS
SC80/SC80A Series Closers
SC80/SC80A Series
Medium Duty
Model Arm Type Shipping Weight
AL (689)
DKB (695)
BR (696)
MTBK (622)1
SC81/SC81A RwPA 8 195
SC81/SC81A HwPA 8 216
SC81/SC81A HDPA110 216
SC81/SC81A DS 10 234
SC81/SC81A DSHO110 255
SC81/SC81A SS110 297
SC81/SC81A SSHO110 314
REFERENCE NOTES:
1) SC81 delay action, HD, DS/HO, SS, and SS/HO arms are not available in matte black. All other matte black will transition to SC81A in Q3 of 2017.
2) SC81/SC81A ships standard with a SLIM Cover.
3) SC81/SC81A is fully adjustable 1-6
Closer Parts and Accessories
Model Description Shipping Weight List
SC81/SC81A-3071 Standard Cylinder 10 125
SC81-3071DEL Delay Cylinder110 157
SC80/SC80A-72 Slim Cover 1 11
SC80/SC81A-72FC FULL Cover 1 16
SC80/SC81A-3077/PA Regular Arm w/ PA Bracket 3 60
SC80/SC81A-3049/PA Hold Open Arm w/ PA Bracket 3 81
SC80/SC81A-3077HD Heavy Duty Parallel Arm13 81
SC80/SC81A-3077DS Dead Stop Parallel Arm 5 99
SC80/SC81A-3049DS Hold Open Dead Stop Parallel Arm15121
SC80/SC81A-3077SS Spring N Stop Arm15162
SC80/SC81A-3049SS Hold Open Spring N Stop Arm15179
SC80/SC81A-18 Mounting Plate - Top Jamb 2 31
SC80/SC81A-18FC Mounting Plate - Top Jamb for FULL Cover 2 31
SC80/SC81A-18PA Mounting Plate - PA 2 31
SC80/SC81A-18PAFC Mounting Plate - PA for FULL Cover 2 31
SC80/SC81A-30 Cush Shoe Support 1 20
SC80/SC81A-61 Blade Stop Spacer 1 22
SC80/SC81A-62A Offset Auxiliary Shoe 1 26
043156626427 SC80A Standard Screw Pack AL Finish replacing 42824 10
043156626465 SC80A Standard Screw Pack DKB Finish replacing 42833 10
043156626441 SC80A Standard Screw Pack BR Finish replacing 42840 10
043156626434 SC60A/80A Screw Pack for Afxed Parallel Arm Shoe (AL)
- in addition to 043156626427
10
043156626472 SC60A/80A Screw Pack for Afxed Parallel Arm Shoe (DKB)
- in addition to 043156626465
10
043156626458 SC60A/80A Screw Pack for Afxed Parallel Arm Shoe (BR)
- in addition to 043156626441
10
043156618422 SC60A/80A PINION CAP (AL) 6
043156618446 SC60A/80A PINION CAP (DKB) 6
043156618439 SC60A/80A PINION CAP (BR) 6
43924 SC60/80/90 PINION CAP (MTBK) 6
REFERENCE NOTE:
1) SC80A delay action, HD, DS/HO, SS, and SS/HO arms are not available in matte black.
2) Delay action will transition to SC81A by end of 2017.
3) Matte Black nish will transition to SC81A in Q3 2017.
4) Matte Black and Dark Bronze Closers share the same screw nish.
Closer Options
Sufx Description List Adder
FC FULL Cover 5
DEL1Delayed Action Cylinder 30
REFERENCE NOTE:
1) Delay action is not available in matte black and will transition to SC81A end of Q3 2017.
SC80/SC80A
(w/ full cover shown)
SC80/SC80A-18PA
SC80/SC80A-18
SC70-62A
SC80/SC80 A-62A
345
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Prices subject to change without notice
SC90/SC90A
Surface Mount /
Mechanical
CLOSERS
Closers SC90/SC90A Series
SC90/SC90A Series
Light- Residential Duty
Model Arm Type Size Shipping Weight
AL (689)
DKB (695)
BR* (696)
SC91/SC91A RwPA 1 5 114
SC91/SC91A HwPA 1 5 135
SC93/SC93A RwPA 3 5 114
SC93 HwPA 3 5 135
SC94/SC94A RwPA 4 5 114
SC94 HwPA 4 5 135
REFERENCE NOTES:
1) SC90 series ship standard as LESS Cover.
2) *Brass will not be available with SC91A/SC93A/SC94A.
3) Less Back Check option is available on SC91 RWPA AL, SC93 RWPA AL, SC94 RWPA AL & DKB at $10 Less List
Closer Parts and Accessories
Model Description Shipping Weight List
SC90/SC90A-18 Mounting Plate - Top Jamb 2 31
SC90/SC90A-18PA Mounting Plate - Push Side 2 31
42901 SC60/80/90 PINION CAP (ALUM) 6
42902 SC60/80/90 PINION CAP (DRKBRZ) 6
42903 SC60/80/90 PINION CAP (BRASS) 6
Closer Options
Sufx Description List Adder
STD Standard Cover (Only ts 93 and 94 models) 16
SC90/SC90A Series
(SC91 shown)
SC90/SC90A-18PA
(SC93A/94A only)
SC90/SC90A-18
(SC93A/94A only)
346
Prices subject to change without notice
Price Book 7
Effective May 4, 2019 • Rev. 05/19
OCH100 Concealed CLOSERS
OHC100A Series
OHC100A Series - Overhead Concealed (90° - without Hold Open)
Model
Door Swing Degree/
Hold Open Option
Arm /Floor
Pivot Type Adjustable Size Shipping Weight
Standard Finish
DKBRZ (695)
OHC100A SO90 (90° - w/o Hold Open) EL-DP 3-5 16 297
OHC101A SO90 (90° - w/o Hold Open) EL-DP 1-3 16 297
OHC100A SO90 (90° - w/o Hold Open) VO* 3-5 16 297
OHC101A SO90 (90° - w/o Hold Open) VO* 1-3 16 297
OHC100A SO90 (90° - w/o Hold Open) SL/GE 3-5 16 297
OHC101A SO90 (90° - w/o Hold Open) SL/GE 1-3 16 297
OHC100A Series - Overhead Concealed (90° - with Hold Open)
Model
Door Swing Degree/
Hold Open Option
Arm /Floor
Pivot Type Adjustable Size Shipping Weight
Standard Finish
DKBRZ (695)
OHC100A HO90 (90° - w/ Hold Open) EL-DP 3-5 16 297
OHC101A HO90 (90° - w/ Hold Open) EL-DP 1-3 16 297
OHC100A HO90 (90° - w/ Hold Open) VO* 3-5 16 297
OHC101A HO90 (90° - w/ Hold Open) VO* 1-3 16 297
OHC100A HO90 (90° - w/ Hold Open) SL/GE 3-5 16 297
OHC101A HO90 (90° - w/ Hold Open) SL/GE 1-3 16 297
OHC100A Series - Overhead Concealed (105° - without Hold Open)
Model
Door Swing Degree/
Hold Open Option
Arm /Floor
Pivot Type Adjustable Size Shipping Weight
Standard Finish
DKBRZ (695)
OHC100A S105 (105° - w/o Hold Open) EL-DP 3-5 16 297
OHC101A S105 (105° - w/o Hold Open) EL-DP 1-3 16 297
OHC100A S105 (105° - w/o Hold Open) VO* 3-5 16 297
OHC101A S105 (105° - w/o Hold Open) VO* 1-3 16 297
OHC100A S105 (105° - w/o Hold Open) SL/GE 3-5 16 297
OHC101A S105 (105° - w/o Hold Open) SL/GE 1-3 16 297
OHC100A Series - Overhead Concealed (105° - with Hold Open)
Model
Door Swing Degree/
Hold Open Option
Arm /Floor
Pivot Type Adjustable Size Shipping Weight
Standard Finish
DKBRZ (695)
OHC100A H105(105° - w/ Hold Open) EL-DP 3-5 16 297
OHC101A H105(105° - w/ Hold Open) EL-DP 1-3 16 297
OHC100A H105(105° - w/ Hold Open) VO* 3-5 16 297
OHC101A H105(105° - w/ Hold Open) VO* 1-3 16 297
OHC100A H105(105° - w/ Hold Open) SL/GE 3-5 16 297
OHC101A H105(105° - w/ Hold Open) SL/GE 1-3 16 297
REFERENCE NOTES:
1) *VO Style offset arm and track available in (AL) (689) or (DKBRZ) (695)
2) OHC100A and OHC101A Series Closers utilize a 'Hold-Open' feature within the cylinder assembly.
3) OHC100A Series Closers (Sizes 3-5) do not meet ADA force requirements.
“S”
“A”
“VO”
GE Pivot
DP Pivot
“AFK”
Closer Parts and Accessories
Model Description Shipping Weight
AL (689) or
DKBRZ (695)
OHC100-S090 Standard 90° Cylinder (Adjustable Sizes 3-5) 12 264.00
OHC101-S090 Standard 90° Cylinder (Adjustable Sizes 1-3) 12 264.00
OHC100-H090 Hold Open 90° Cylinder (Adjustable Sizes 3-5) 12 264.00
OHC101-H090 Hold Open 90° Cylinder (Adjustable Sizes 1-3) 12 264.00
OHC100-S105 Standard 105° Cylinder (Adjustable Sizes 3-5) 12 264.00
OHC101-S105 Standard 105° Cylinder (Adjustable Sizes 1-3) 12 264.00
OHC100-H105 Hold Open 105° Cylinder (Adjustable Sizes 3-5) 12 264.00
OHC101-H105 Hold Open 105° Cylinder (Adjustable Sizes 1-3) 12 264.00
OHC100-AFK Mounting Bracket & Hardware 1 23.70
OHC100-EL “A” Style End Load Arm 2 70.00
OHC100-SL “S” Style Side Load Arm 2 49.40
OHC100-VO* “VO” Style Offset Arm & Track 4 70.00
OHC100-GE Center Hung Floor Pivot used with Side Load arm 2 41.20
OHC100-DP Center Hung Floor Pivot used with End Load arm 2 41.20
* VO Style offset arm and track available in AL(689) or DKBRZ (695).
REFERENCE NOTES:
1) OHC100 series cylinder are available only in DKBRZ (695)
2) Mounting Bracket/Hardware and Arms are available only in AL (689) with the exception of VO Style.
3) *VO style offset arm and track are available in both AL (689) or DKBRZ (695).
347
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Prices subject to change without notice
8200Auto OperatorCLOSERS
8200 Series
8200 Series
Auto Operator
Model Description Shipping Weight AL (689)
8231 Pull Side (STD) 41 2398
REFERENCE NOTES:
1) Ships with standard 26” length cover.
Model Description Shipping Weight AL (689)
8242 Push Side (REG) 41 23.98
REFERENCE NOTES:
1) Ships with standard 26” length cover.
Auto Operator Parts
Model Description List
8230-3077T Standard Arm 142.00
8230-3077PLCM Standard Arm w/Track 206.00
8230-3038 Track 72.10
8230-72MC Metal Cover 113.00
8230-MS Screw Pack 18.50
8230-3018 Mounting Bracket 275.00
8230-3034 Track Roller 19.60
8230-3155 Label Kit 23.70
8230-3454 Motor Gearbox Assembly 1,488.00
8230-3462 Control Box 984.00
8230-3498-2A A/C Power Cable 39.10
Auto Operator Parts
Model Description List
8240-3077 Regular Arm 115.00
8240-72MC Metal Cover 113.00
8240-MS Screw Pack 18.50
8240-77 Main Arm 106.00
8240-79 Rod 19.60
8240-3018 Mounting Bracket 275.00
8240-3155 Label Kit 23.70
8240-3454 Motor Gearbox Assembly 1,488.00
8240-3462 Control Box 984.00
8240-3498-2A A/C Power Cable 39.10
8240 Series
8230 Series
Price Book 7
Effective May 4, 2019 • Rev. 05/19
348
Prices subject to change without notice
8300 Auto Operator CLOSERS
8300 Series
8200 Series
Actuators & Accessories
6" Round – Text w/ Logo
Model Description List
8310-852T Push Plate, Wall Mount 273.00
8310-869F Mounting Box, Flush 166.00
8310-869S Mounting Box, Surface 166.00
8310-802 Weather Ring 23.70
1 ½" x 4 ¾" Jamb – Text w/ Logo
Model Description List
8310-818T Push Plate, Jamb Mount 178.00
8310-819F Mounting Box, Flush 39.10
8310-819S Mounting Box, Surface 39.10
Wireless Transmitters & Receiver
Model Description List
8310-844 Transmitter, Wall Mount 202.00
8310-844J Transmitter, Jamb Mount 202.00
8310-861 Transmitter, Handheld 202.00
8310-865 Receiver 213.00
REFERENCE NOTES:
1) Additional actuators and accessories are available through LCN - please see the LCN Price List.
8310-852T
8310-818T
8310-844
8310-865
Standard Features
• UL294 Listed for Access Control
• Class 2 rated power limited output*
• Universal 120-240 VAC input
• Regulated and ltered DC outputs
• AC input, battery and DC output LED indications
• Plug and play connectors for optional distribution boards
• AC input status indication on outside cover
• AC monitoring
• 14"H x 12"W x 4"D enclosure
* PS906 is Class 2 when used with 900-8P option board
1. Select Power Supply
Model No. Description List Price
PS902
Base Power Supply (2A @ 12/24 VDC- eld selectable) (approx. weight: 9 lbs)
-PS902 is able to accept a total of one optional distribution board, plus one re
alarm relay along with one battery backup board and up to two 7A/hr batteries
252.00
PS904
Base Power Supply (4A @ 12/24 VDC- eld selectable) (approx. weight: 11 lbs)
- PS904 is able to accept a total of two optional distribution boards, plus one battery backup board and
up to two 7A/hr batteries
477.00
PS906
Base Power Supply (6A @ 12/24 VDC- eld selectable) (approx. weight: 7 lbs)
- PS906 is able to accept a total of three optional distribution boards or two optional boards with battery
backup board and two 7A/hr batteries
738.00
PS914
Base Power Supply (4A w/ 16A inrush @ 12/24 VDC- eld selectable) (approx. weight: 9 lbs)
- PS914 is able to accept a total of two optional boards, plus one battery backup board and two 7A/hr
batteries
722.00
PS914RFK The PS914RFK allows the retrot of the PS914 into an existing PS873 cabinet. 846.00
BAA Buy America Act compliant power supply option will be labeled as "Assembled in the U.S.A. with U.S. and
foreign materials" 39.00
FALCON "EL" devices require the PS914 to operate.
When specifying PS914 power supply for use with "EL" Electric Latch Retraction devices,
the 2RS is furnished when board option not specied.
2. Select Optional Distribution Board with or without FA (Fire Alarm Relay)
Model No. Description Part # List Price
900-4R Independently controlled relays 44489912-00 170.00
900-4R-FA Independently controlled relays with FA 232.00
900-2RS 2 Relay board output 44489896-00 173.00
900-2RS-FA 2 Relay board output with FA 235.00
900-4RL 4 Relay board integrated logic for controlling security interlocks, auto operators and time delays 44489920-00 467.00
900-4RL-FA 4 Relay board integrated logic for controlling security interlocks, auto operators and time delays with FA 529.00
900-8F 8 fuse protected outputs 44489946-00 62.00
900-8F-FA 8 fuse protected outputs with FA 124.00
900-8P 8 PTC protected outputs 44489938-00 62.00
900-8P-FA 8 PTC protected outputs with FA 124.00
900-BBK Battery Backup Kit (includes two 7A/hr batteries) 44489961-00 244.00
900-BB Battery Backup Board Only (sold separately) 44489953-00 122.00
900-BAT Batteries Only (two 7A/hr batteries, sold separately) 44487155-00 122.00
* For eld installation, use model number. Example: 900-2RS.
3. Select Other Power Supply Options
Model No. Description Part # List Price
900-FA
Fire Alarm Relay (EIR) module is a plug-in relay to provide an interface with re or other emergency
override systems PS902: may be installed directly on power supply or may be used with optional
distribution boards PS904/PS906/PS914: must be used with optional distribution boards. If an optional
board is not listed the 900-8F-FA will be provided.
44487247-00 62.00
900-KL Key Lock Cover (not available with BAA) 44486850-00 39.00
NOTES:
1) PS902, PS904, PS 906 and PS914 power supplies require connection to AC line voltage. Installation and all electrical connections (high and low
voltage) should be performed by a qualied electrical contractor.
2) Power Supplies and Power Supply Options are not subject to standard discount terms.
349
Prices subject to change without notice
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Power Supplies
ELECTRONICS
Power Supplies
Electric Power Transfers
Model No. Description SP28 SP313
Weight
lbs
EPT 2 Two 18 gauge wires 471 471 2.5
EPT 10 Ten 24 gauge wires 499 499 2.5
NOTE:
Electric Power Transfers are not subject to standard discount terms.
EPT Options
Sufx Description List Add
CON Cross-category solution using common interconnect components for electried options.
Available on the EPT10. Specify CON. See wire harness options in below Allegion Connect table.
$11.00
BAA "Buy America Act" compliant EPT option - No additional charge will be labeled as
“Assembled in the U.S.A. with U.S. and foreign materials”
N/C
Allegion Connect Harnesses - Prices listed are net, discounting does not apply
Part Number Description Price Each
Harnesses with Molex Connectors on both ends (for use with Hollow Metal Doors)
CON-6 6" Wire Harness (internal p/n 106190-00) $10.50
CON-12 12" Wire Harness (internal p/n 106191-00) 14.00
CON-26 26" Wire Harness (internal p/n 106192-00) 15.80
CON-32 32" Wire Harness (internal p/n 106193-00) 16.90
CON-38 38" Wire Harness (internal p/n 106194-00) 18.50
CON-44 44" Wire Harness (internal p/n 106195-00) 18.00
CON-50 50" Wire Harness (internal p/n 106196-00) 18.50
CON-192 192" Wire Harness (internal p/n 106197-00) 44.20
Harnesses with Molex Connector on one end, crimped pins on other w/ attachable Molex connector (for use with Wood Doors)
CON-6P 6" Wire Harness (internal p/n 106201-00) $13.40
CON-12P 12" Wire Harness (internal p/n 106202-00) 16.90
CON-26P 26" Wire Harness (internal p/n 106203-00) 18.50
CON-32P 32" Wire Harness (internal p/n 106204-00) 19.80
CON-38P 38" Wire Harness (internal p/n 106205-00) 20.30
CON-44P 44" Wire Harness (internal p/n 106206-00) 20.90
CON-50P 50" Wire Harness (internal p/n 106207-00) 21.50
CON-192P 192" Wire Harness (internal p/n 106208-00) 46.50
Harness with Molex Connector on one end, stripped leads on other (for connection to power supply)
CON-6W 6" extension to power supply (internal p/n 106210-00) $13.40
Service Kit
CON-KIT Connector Service Kit (internal p/n 050823-00) contains:
-100 each male & female terminals
-10 each 4-pin and 8-pin male connectors
-10 each 4-pin and 8-pin female connectors
- 1 extraction tool"
$111.00
350
Prices subject to change without notice
Price Book 7
Effective May 4, 2019 • Rev. 05/19
Accessories
ELECTRONICS
Power Transfers
Warranty
Falcon Door Hardware warrants its mechanical offering of locks, exit devices and door
controls products manufactured to be free from defects in materials and workmanship for
a period of TEN (10) YEARS from the date of manufacture with the exception of the
products detailed in the table below. The terms and conditions of this new warranty
apply to Falcon Door Hardware shipments made on or after November 1
st
, 2008.
______________________________________________________________________
This limited warranty does not cover products that (i) are not the proper size for the application;
(ii) are not installed in accordance with Falcon’s published installation instructions; (iii) are
installed with improper or incorrect parts; (iv) have been modified, repaired, or altered in any way
without the express written consent of Falcon; (v) are used for purposes which they are not
designed or intended; (vi) are subjected to misuse, abuse, negligence, or accident; or (vii) are
grade 2 products used in educational facilities and student housing. The following costs and
expenses are not covered by the provisions of this limited warranty; (i) labor costs for the removal
and reinstallation of products; (ii) shipping and freight expenses required to return products to
Falcon; (iii) normal maintenance; and (iv) economic losses. THE PREVISIONS OF THIS
WARRANTY DO NOT APPLY TO FINISHES.
Falcon will replace the products that are found to be defective, provided said products are
returned to Falcon within fifteen (15) days of defect.
FALCON SHALL IN NO EVENT BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL,
INDIRECT, SPECIAL, OR PUNITIVE DAMAGES FOR ANY CLAIM WHETHER BASED ON
CONTRACT; WARRANTY, TORT (INCLUDING, BUT NOT LIMITED TO, STRICT LIABILITY OR
NEGLIGENCE), PATENT INFRINGEMENT, OR OTHERWISE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.
This limited warranty replaces all other warranties, expressed or implied, and excludes any
warranties of fitness for a particular purpose or merchantability. No agent, representative, dealer,
or employee of Falcon has the authority to increase or alter the obligations of this limited
warranty.
Note: Should the Product be considered a “consumer product” as may be covered by the
Magnuson-Moss Federal Warranty Act, please be advised that: (1) Some states do not allow
limitations on incidental or consequential damages or how long an implied warranty lasts, so that
the above limitations may not fully apply; and (2) This warranty gives specific legal rights and a
user may have rights which may vary from state to state.
PRODUCT EXCEPTION WARRANTY .
OHC100A CONCEALED CLOSERS 5 YEARS
8200 AUTOMATIC OPERATOR 1 YEAR
ELECTRONICS/ELECTRIFIED 1 YEAR
WARRANTY
About Allegion
Allegion (NYSE: ALLE) creates peace of mind by pioneering safety and security.
As a $2 billion provider of security solutions for homes and businesses, Allegion
employs more than 8,000 people and sells products in more than 120 countries
across the world. Allegion comprises 27 global brands, including strategic
brands CISA®
, Interflex®
, LCN®
, Schlage® and Von Duprin®
.
For more, visit www.allegion.com
© 2019 Allegion
010065, Rev. 05/19
allegion.com/us
